Professional Documents
Culture Documents
Zigbee Based Patient/Health Monitoring System: Embedded Systems Ph:7842522786 9948887244
Zigbee Based Patient/Health Monitoring System: Embedded Systems Ph:7842522786 9948887244
9948887244
The purpose of this project is to combine the embedded technology with the Zigbee wireless
communication technology; this project is a health monitoring system, first of all, devices that
measure patient's physiological signal by using zigbee transceiver and gsm sms.
BLOCK DIAGRAM:
TRANSMITTER:
POWER
SUPPLY
TEMPERATU
RESENSOR
ZIGBEE
MICRO
CONTROLLE
R
TRANSCEIV
ER
PULSERATE
SENSOR
skesystems@gmail.com
Vijayawada
Hyderabad
Page 1
RECEIVER:
POWER
SUPPLY
ZIGBEE
TRANSCEIV
ER
MICRO
CONTROLLER
KEYS
GSM
DESCRIPTION:
In this project one user's health monitoring system has a few zigBee devices to
measure one user's physiological data. Even if there are a lot of ZigBee devices nearby, the
communication should be accepted between only one user's ZigBee devices. So, the access
control should be implemented because there can be a lot of ZigBee devices nearby. We propose
a group ID mechanism to implement a access control.There is an access control in MAC layer
but we design and implement it in application layer to handle conveniently. The physiological
data must not be lost but a wireless communication such as zigbee can lose a data. So, this
project proposes the reliable data transmission not to lose a physiological data in zigbee based
health monitoring system.here temperature and pulse rate sensor values should be given to micro
controller through ADC, that data given to the zigtransceiver .in receiver section zigbee
transceiver will receiver will receive that information and given to the micro controller.if exceeds
their values gsm sends the sms to the authorized person.
When the temperature sensor and pulse sensor reaches the threshold value .it will transmit to
the receiver section and that values sends to the doctor using GSM MODEM. If at any time we
skesystems@gmail.com
Vijayawada
Hyderabad
Page 2
ZIGBEE TECHNOLOGY:
SOFTWARES:
1. Embedded C
2. Keil IDE
3. Uc-Flash or ISP
4. Express PCB
HARDWARES:
1. Micro Controller
2. Pulse rate sensor
3. Temperature sensor
4. Zigbee transceiver
5. GSM
6. Power Supply
skesystems@gmail.com
Vijayawada
Hyderabad
Page 3
RESULT:
By implementing the project we can control the devices as well as health monitoring.
skesystems@gmail.com
Vijayawada
Hyderabad
Page 4