Professional Documents
Culture Documents
Sellos Mecanicos PDF
Sellos Mecanicos PDF
INTERESTED IN AND CLICK. YOU MAY ALSO USE THE "NAVAGATION PANE" ICON LOCATED ON
THE TOOLBAR OF ACROBAT READER TO DISPLAY AN INDEX OF THUMBNAIL IMAGES DEPICTING
THE PAGES IN THIS CATALOG. THE THUMBNAIL IMAGES CAN BE DOUBLE-CLICKED TO TAKE
YOU TO THE PAGE OF CHOICE.
PERFORMANCE
5000 FPM (25.5 MPS)
Shaft Speed:
Pressure:
Vacuum:
Temperature:
MATERIALS
Metallqy:
Rotary faces:
Stationary faces:
Springs:
O-Rings
BENEFITS
FEATURES
Pre-assembled cartridge
Balanced internal design
l
Fits standard ANSI pumps
0 Rebuild kit available
0 Attached setting clips
. Minimal distance to first obstruction
0 Stationary springs
YTrademark of As&i Glass Co.
@Kalrez is a registered trademark of DuPont
- FLUSH
Easy to install.
Runs cooler and lasts longer.
No modifications.
In-field repair.
No lost parts.
Compatible with wide range Of
bearing p*otectots.
Better face/seat alignment.
PERFORMANCE
Shaft Speed:
Pressure:
Vacuum:
Temperature:
MATERIALS
Metallurgy:
Rotary faces:
Stationary faces:
springs:
O-Rings
FEATURES
Double cartridge design
Balanced configuration
. Cost effective rebuild kits
l
Fits standard ANSI pumps
l
Stationary compression units
l
l
,- INLET
L OUTLET
316SS &Alloy 20
silicon carbide (SA)
Inboard - chemical grade carbon;
tungsten carbide; Outboard - chemical
grade carbon
Hastelloy C
Fluorcelastomer
standard: Aflas or
K&a@ offered as alternative
BENEFITS
Easy
installation.
Runs cooler and lasts longer
Easy in-field repair.
No modification required.
Improved face alignment and
extended seal life
Fits wide range of pumps.
FEATURES
l
l External seal
l Compact axial length
l
Stationary design
l Cartridgeseal
l
l
STYLE 19
double seal
Single/double design
Repair kit available
PERFORMANCE
Speed:
4OOG FPM (20 MPS)
Pressure:
Style 19: 300 psig
(double)
Style 20: 4Oll psig
(single)
Temperature:
-40F G4OC) to
+350F (+175C)
MATERIALS
Metal parts:
Set screws:
Springs:
O-Rings:
316SS
Hastelloy C
Hastelloy C
fluoroelastomer
standatd
Rotary face:
silicon carbide (SA)
or tungsten carbide
Stationary face: chemical grade carbon
or tungsten carbide
BENEFITS
Can withstand ,125 T.I.R.
No stuffing box requited
Fits a wide variety of equipment
Minimizes vibration and harmonic distortion
Easy installation
Services a wide variety of applications
Field repairable
STYLE 20
single seal
FEATURES
l
l
l
l
l
l
BENEFITS
Versatile/reduced inventory. Same gland, sleeve and
seat wed in each option
Simple conversion/in-plant repair
Eliminates harmonic vibration, improved face alignment,
extended seal life
Directs steam purge, non-sparking
Provides positive double seal cooling through forced
circulation
Readily available during adjustments
PERFORMANCE
5OCG FPM (25.5 MPS)
Shaft speed:
up to 300 psig (20 bar) stuffing box
Pressure:
P-m
Vacuum:
28 Hg max. (700 mm Hg)
Temperature:
400F (205OC) max. with Viton
O-Ritz: 300F (150C) max. with
EPR O-Ring
PERFORMANCE
5000 FPM (25.5 MPS)
Shaft Speed:
Pressure:
up to 300 psig (20 bar) stuffing box
pressure; up to 150 psig (10 bar) barrier
fluid capacity
28 Hg max. (700 mm Hg)
Vacuum:
Temperature:
4OOF (205C) max. with Viton
O-Ring; 3OOF (150C) max. with
EPR O-Ring
o,-
MATERIALS
Metal parts:
316SS
bronze steam purge bushing (61/63)
316SS pumping ring (62/64) optional
Bellows:
AM 350 or Hastelloy C (61/62)
Spring assembly: Hastelloy C springs with 316SS carrier (63/64)
O-Rings:
fluorcelastomer standard
Rotary face
silicon carbide (SA)
stationary face: chemical grade carbon or tungsten carbide
STYLE 61
single metal bellows seal
STYLE 62
double metal bellows seal
@
STYLE 63
single multiple spring seal
STYLE 64
double multiple spring seal
5
AXIAL MOVEMENT
6
ECCENTRICITY
SHAFT DEFLECTION
VIBRATION -
TANDEM
DOUBLE
VACUUM &
TANDEM
TYPICAL
SEAL
STAGED LIPS
ARRANGEMENTS
1. Drive collar
2. Drive sleeve (various coatings available)
3. Bearing cap
4 . Bearings
5 . Seal housing
6 . Flush tap
7. Sleeve c&sting
8. Flexible housing
OPERATING PARAMETERS
480F (25OC)
Temperature:
Speed:
Pressure:
Hg to 10 bar)
finish:
4 to 6 Mu. In.
hardness: 50 to 70 Rockwell C
coating: (specified based on application)
and seal housing material:
316SS standard
Flexible housing material:
PTFE, 316SS, Hastelloy C 276
Movement capability:
1 Total Indicated Runout
(TW
1 Total Axial Movement
(TAM)
(specific movements calculated
pet application)
Sleeve
Sleeve
Sleeve
Sleeve
1
7
STYLE 35
8
316SS
Hastelloy C
316SS
fluoroelastomer standard
chemical grade carbon or tungsten
carbide
silicon carbide (SA)
FEATURES
BENEFITS
Easy installation
No shaft/sleeve fretting
Superior dogging resistance
No pump/sleeve modification
Simple in-field repair
STYLE 35FS
FEATURES
l Stationary design
l Balanced design
l Silicon carbide seat standard
l Flush, quench and drain
connections standard
l Cartridge design
316SS
Hastelloy C
Hastelloy C
fluoroelastomer standard
silicon carbide (SA)
metal filled carbon
BENEFITS
For high speed service (6500 FPM)
For pressures to 1200 p&g
Best PV factor/nlns cooler
Wide range of environmental
control options
Easy to install
PERFORMANCE
speed:
5000 FPM (25.5 MPS)
Pressure:
Temperature:
MATERIALS
Metal parts:
Set screws:
Springs:
O-Rings:
Rotary face:
316SS standard
Hastelloy C
Hastelloy C
fluoroelastomet
standard
chemical grade carbon, tungsten
carbide
FEATURES
l
l
l
l
Balanced design
Isolated springs
Static shaft O-Ring
Fits all ANSI pumps
BENEFITS
High psig capability
Prevents clogging
No shaft/sleeve wear
No pump modification
FEATURES
BENEFITS
0 Outside mounted
l Preset
l Balanced design
l Split drive collar option
0 Metal parts isolated from media
PERFORMANCE
1500 FPM (7.5 MPS)
speed:
Pressure:
75 psig (5 bad
Temperature: 212OF @OC)
MATERIALS
Metal parts:
set scn?ws:
Rotary face:
316SS
316SS
filled PTFE, chemical grade carbon
FEATURES
BENEFITS
BENEFITS
Inherently balanced
Self-cleaning design
No dynamic secondary seal
Choice of b4ows
Hg)
,nnerenuy alancea
l
l
l
Self-cleaning design
No dynamic secondary seals
Choice of beUows
l Small
l
section
GRAPH-LOCK@
neat generatea
seal *ace
No springs to clog
Eliminates seal hangup and fretting
Optional metahrgies
satisfy wide range
of applications
Compatible with most existing- stuffing
box designs
secondary seal High tetnperaoxe capability
316.9
stainless steel
fluoroelastomer or nittile
carbon vs. ceramic, tungsten carbide optional. See
price list for other material options.
FEATURES
BENEFITS
0 Unitized construction
l Standard Viton I&lows
. Shott operating length
l Fully endosed
single spring
l Carbon face flexibility
316SS
316%
HasteIIoy C
fluotc&stomer
standard
chemical grade carbon
standard, tungsten
carbide optional
construction
Compact
BENEFITS
For use in small stuffing boxes or where
multiple seals are needed
Adaptable to many applications
Reuseable seaI components
Capable of handling a wide range of
chemical
applications
13
BENEFITS
FEATURES
l
GYLON
element
sealing
0 Optional shell
materials
l
Simple
constNction
P/S
standard configuration
reverse lip
double lip
Cartridge double
P/S-I Seal
I
I
FEATURES
l
Simple
BENEFITS
sealing
elements
Machined gland
. coated sleeve
l Sealing elements not housed
in metal shell. Lips are
supported by PTFE spacers
within an engineered gland
*The P/S-II has proven to be very effective in positive displacement pumps moving viscous
materials (often with no environmental contmls).
P/S-II seal
YXUU~ and tandem
P/S-l I Seal
Double
P/S-l I Seal
with sleeve
i!
in
Ceramic . . .
has two advantages that make it the
most commonly used seat material.
It is nearly chemically inert and
costs substantially less than other
materials. Ceramic performs well in
many applications. Other materials
should be considered for thermally
variable service such as hydrocarbon process applications or
where elevated temperatures tend to
Tungsten Carbide . . .
vaporize media.
STYLE 01
standard O-ring seat
STYLE 04
standard square shaped seal
(cup mounted)
STYLE 02
standard 7 shaped seat
16
STYLE 08
standard L shaped seat