Professional Documents
Culture Documents
Part 1 Construction of Hull Draft
Part 1 Construction of Hull Draft
Step 1
Connect pieces #1 and #4 as shown
to the left. Piece #1 should be
placed under the lip of piece #4.
Step 2
Place piece #2 ontop of piece #1 The
picture to the right shows this.
Step 3
Place piece #7 to over laps on
pieces #1 and #2. The picture
on the left illustrates this.
Step 4
Flip the two products from Step 3, that
way they are right side up. Use pieces #5
to join them together.
Step 5
Place piece #1 next to the two white
pieces, #5. Piece #1 should be placed on
the side opposite to the two smooth
orange pieces.
Step 6
Finally, add pieces #6, #8 and #9
to the hull of the catamaran. They
should be placed on the front two
black pieces as shown in the
picture to the right. Pieces #6 are
placed at the tip while pieces #8
and #9 are placed immedaitaley
behind.