Professional Documents
Culture Documents
d.o.o.
CONSUMABLES
d.o.o.
TRADITION
Our history and tradition goes back to the year 1939, since that time at Jesenice location
welding material is developed and produced. Now about 200 experienced employees care for
QUALITY
Our philosophy is the customer satisfaction and production of high quality products, so we
in 1997 got quality management system approval ISO 9001.
Our production facilities are continuously checked and approved by Internacional Supervisory
Institutions TV, DB and many Classification societies: GL, BV, ABS, LR, RS, DNV, RINA,
PRS, SZU, CR and S.
All metallic and mineral materials for the production of Elektrode Jesenice products are under
strict control and all welding materials produced in our company are tested. Manufacturing
certificates are available on request.
SERVICE
Today we supply to more than 500 constant customers from 25 countries.
Long experiences enables Electrode to offer you a comprehensive know-how about of
welding.
www.elektrode.si
d.o.o.
CONTENTS
d.o.o.
PRODUCT
PRODUCT PROGRAMME
EN ISO
2560-A
2560-B
Low alloyed cellulosic, rutile and acid electrodes
NEUTRAL
E 35 AA 13
E 43 40 A
RAPID
E 38 2 R A 13
E 43 20 A
CELEX
E 35 2 C 21
~E 43 10 A
CELEX Mn
E 42 3 C 21
~E 49 10 A
CELEX Mo
E 42 3 Mo C 21
~E 49 10 A
CELEX Ni
E 46 3 1NiC 21
~E 55 10-N1 A
CELEX NiMo
E 50 3 1NiMo C 21
~E 57 10-N2M3 A
JADRAN S
E 35 0 RC 11
E 43 13 A
RUTILEN 12
E 38 0 RC 11
E 43 12 A
RUTILEN Z
E 42 0 RC 11
E 49 13 A
RUTILEN 1000 S
E 42 0 RC 11
E 49 13 A
EMONA
E 38 2 RB 12
E 43 03 A
RUTILEN 13
E 42 0 RR 12
E 49 12 A
RUTILEN X
E 42 0 RR 12
E 49 13 A
RUTILEN 2000 S
E 42 0 RR 12
E 49 13 A
RUTILEN K
E 38 2 R 12
E 43 13 A
RUTILEN 13 M
E 38 0 R 12
E 43 12 A
RUTILEN S
E 38 0 RC 11
E 43 13 A
RUTILEN E
E 42 0 RC 11
~E 49 13 A
High efficiency electrodes
SAVA 130
E 38 0 RR 33
E 43 24 A
SAVA 150
E 38 0 RR 53
E 43 24 A
SAVA 180
E 42 0 RR 74
E 49 24 A
SAVA 200
E 42 0 RR 74
E 49 24 A
SAVA GV 130
E 38 0 RR 34
E 43 24 A
SAVA GV 160
E 38 0 RR 54
E 43 24 A
SAVA 150 B
E 42 2 B 53
E 49 28 A
SAVA 150 AR
E 42 4 RA 53
E 49 27 A
Basic, low hydrogen electrodes
EVB 50
E 42 4 B 32 H 5
E 49 18 A
EVB 55
E 42 6 B 32 H5
E 49 18-P1 A
EVB EXTRA
E 42 6 B 12 H10
E 49 A6-P1 A
EVB 45
E 42 2 B 32 H5
E 49 18-P1 A
EVB 47
E 38 2 B 32 H5
E 43 18 A
EVB S
E 42 4 B 12 H10
E 49 16 A
GALEB 50
E 42 2 B 32 H5
E 49 16 A
EVB K
E 42 2 B 12 H5
~E 49 16-P1 H5
2560-A / 18275-A*
2560-B / 18275-B*
Medium alloyed basic electrodes for welding finegrained steels
EVB 60
E 50 4 Mo B 42 H5
~E 57 18-3M2 A
EVB 65
E 55 6Mn1NiMo B42H5* /
EVB Ni
E 50 61 Ni B 42 H5
~E 55 16-3N3 A
EVB CuNi
E 46 4 ZB 42 H5
E 49 16-NC A
EVB CuNiCr
E 46 4 Z B 42 H5
E 49 16-NCC1 A
EVB NiMo
E 50 41 NiMo B 42 H5
~E 57 18-N2M3 A
GALEB 70
E 50 2Mn 1Ni B 42 H5
~E 57 16-N2M3 A
EVB 2.5 Ni
E 50 8 2Ni B 42 H5
~E 57 18-3N3 A
EVB 2.5 NiMo
E 55 6 2NiMo B 42 H5 * ~E 62 18 N4M2A H5 *
EVB 62
E 62 4 MnMoB42H5*
~E62 18 4M2 H5
EVB 75
E69 6Mn2NiCrMoB42H* ~E 78 16-N5CM3AH5*
EVB CrNiMo
E 62 2Z-B 42 H5 *
/
EVB 80
~E 696Mn2NiCrMoB42H5* ~E 78 16 N5CM3 A H5*
E 794Mn2Ni1CrMoB42H5* ~E 83 16 N5CM3 H5*
EVB 100
EVB 100 EKSTRA
E 89 4 ZB62 H5
~E 83 16 N5CM3 H5*
EVB SP2
~ E 62 4 Z B 34
~E 69 18 GA
AWS
Page
A-5.1 / A-5.5*
/
E 6020
E 6010
E 7010-G
E 7010-A1*
E 8010-G *
E 9010-G*
E 6013
E 6012
E 6013
E 6013
E 6013
E 6013
E 6013
E 6013
E 6013
E 6013
E 6013
E 6013
A1
A2
A3
A4
A5
A6
A7
A8
A9
A10
A11
A12
A13
A14
A15
A16
A17
A18
A19
E 7024
E 7024
E 7024
E 7024
E 7024
E 7024
E 7028
E 7027
B1
B2
B3
B4
B5
B6
B7
B8
E 7018-1H4R
E 7018-1
E 7016
E 7016
E 6019
E 7016
E 7016
E 7016
A-5.5
C1
C2
C3
C4
C5
C6
C7
C8
E 8018-G
E 9018-G
E 8018-C3
E 7018-G
E 7018-G
E 8018-G
E 9016-G
E 8018-C1
E 9018-G
~E10018-G/D2
E 10018-G
~E 11018 G
E 11018-G
E 12018-G
E 12018-G
/
D1
D2
D3
D4
D5
D6
D7
D8
D9
D10
D11
D12
D13
D14
D15
D16
I1
d.o.o.
PRODUCT
PRODUCT PROGRAMME
EN ISO
2560-A / 3580-A *
2560-B / 3580-B *
Medium and high alloyed basic electrodes for welding creep resistant steels
E464MoB42H5
~E4918-3M3A
EVB Mo
EMoB42H5 *
~E4918-1M3 *
EVB MoV
E MoV B 42 H5 *
~E 62 18-G H5 *
EVB CrMo
E CrMo1 B 42 H5 *
~E 55 18-1CM H5 *
EVB 2 CrMo
E CrMo2 B 42 H5 *
~E 62 18-2C1MH5 *
EVB P24
E Z B42 H5 *
~E 55 18-3C1MV *
EVB 5 CrMo
E CrMo5 B 42 H5 *
E 55 15 5CM-H5 *
EVB 9 CrMo
E CrMo9 B 42 H5 *
E 62 15-9C1M H5 *
EVB CrMoV
~ E CrMoV1 B32 H5* ~E 55 16-GH5 *
E Z B 42 H5 *
~E 62 16-3C1 MV H5*
EVB 3 CrMoV
~ E CrMo91 B 42 H5* ~E 62 15-9C1MV1 H5*
EVB 9 CrMoV
E CrMo91 B 42 H5 *
~E 62 15-9C1MV H5 *
EVB 91 CrMoV
EVB Mo1Cr
E Z B42 H5 *
~E 55 18-1M3 H5 *
Medium alloyed rutile electrodes for welding creep resistant steels
E46AMoR12/EAMoR12* ~E 55 13-1M3 A (*)
E Ti Mo
E Ti MoV
E MoV R 12 *
E 55 13 G *
E Ti CrMo
E CrMo1 R 12 *
E 55 13 1CM *
E Ti 2 CrMo
E CrMo2 R 12 *
E 62 13 2C1M *
E Ti 5 CrMo
E CrMo5 R 12 *
E 62 13 5CM *
EN ISO 3581-A *
DIN 8556/ DIN 1736 *
High alloyed ferritic stainless steel electrodes
INOX B 13 Fe
E 13 B 43
E 13 MPB 30+ 130
INOX B 13/1 Fe
E 13 B 43
E 13 1 MPB 30+ 130
INOX B 13/4 Fe
E 13 4 B 43
E 13 4 MPB 30+ 130
INOX B 13/6 Fe
/
/
INOX B 17 Fe
E 17 B 43
E 17 MPB 30+ 130
INOX B 17 MoFe
E 17MoB43
E 17Mo
High alloyed austenitic and austenitic-ferritic stainless steel electrodes
INOX R 19/9 Nb
E 19 9 Nb R 12
E 19 9 Nb R 26
INOX B 19/9 Nb
E 19 9 Nb B 22
E 19 9 Nb B 20+
INOX R 19/9 NC
E 19 9 LR 12
E 19 9 LR 26
INOX R 19/12/3 Nb
E 19 12 3 Nb R 12
E 19 12 3 Nb R 26
INOX B 19/12/3 Nb
E 19 12 3 Nb B 22
E 19 12 3 Nb B 20+
INOX R 19/12/3 NC
E 19 12 3 LR 12
E 19 12 3 LR 26
INOX R 19/13/4 L
~ E 19 13 4 LR 12
~ E 19 13 4 LR 23
INOX R 22/9/3 LN
E 22 9 3 N LR 32
/
INOX R 20/10/3 L
~ E 20 10 3 R 12
~ E 20 10 3 R 23
INOX R 20/25 L
E 20 25 5 Cu NL R 32 E 20 25 5 L Cu R
INOX B 20/25 L
E 20 25 5 Cu NL B 23 E 20 25 5 L Cu B
High alloyed heat resistant stainless steel electrodes
INOX R 25/4 Fe
E 25 4 R 43
E 25 4 MPR 33 160
INOX R 25/14 NC
E 23 12 LR 32
E 23 12 LR 26
INOX R 25/14/3 NC
E 23 12 2 LR 32
E 23 13 2 LR 26
INOX R 25/20
E 25 20 R 32
E 25 20 R 26
INOX B 25/20
E 25 20 B 42
E 25 20 B 20+
High alloyed, special purpose electrodes
INOX R 22/12/3 Fe
E 23 12 2R 53
/
INOX B 18/8/6
E 18 8 Mn B 22
E 18 8 Mn B 20+
INOX R 18/8/6 Fe
E 18 8 Mn R 53
E 18 8 Mn MPR33 160
INOX R 18/8/6
E 18 8 Mn R 12
E 18 8 Mn R 26
INOX R 29/9
E 29 9 R 12
E 29 9 R 26
INOX R 29/9 Fe
E 29 9 R 53
E 29 9 R 26
INOX B 70/15
/
EL NiCr 15 Fe Mn *
I2
AWS
Page
A-5.5 / A-5.4 *
E 7018-A1
E1
E 8018-G
E 8018-B2
E 9018-B3
/
E 502-15 *
E 505-15 *
/
/
~ E 9016-B9
~ E 9018-B9
E 8016-B5
E2
E3
E4
E5
E6
E7
E8
E9
E10
E11
E12
E 8013-G
E 8013-G
E 8013-G
E 9013-G
E 8016-B6
A-5.4 / A-5.11*
F1
F2
F3
F4
F5
E 410-15
~ E 410-15
E 410 NiMo-15
/
E 430-15
~ E 430Mo-15
G1
G2
G3
G4
G5
G6
E 347-17
E 347-15
E 308 L-17
E 318-17
E 318-15
E 316 L-17
E 317 L-17
E 2209 L-17
E 308 MoL-17
E 385-17
E 385-15
H1
H2
H3
H4
H5
H6
H7
H8
H9
H10
H11
AISI: 446
E 309 L-17
E 309Mo L-17
E 310-16
E 310-15
I1
I2
I3
I4
I5
E 309Mo-16
~ E 307-15
~ E 307-16
E 307-17
E 312-17
E 312-26
E NiCrFe-3 *
J1
J2
J3
J4
J5
J6
J7
d.o.o.
PRODUCT
PRODUCT PROGRAMME
EN
EN 14700
Hardfacing electrodes
UTOP 38
E Fe 3
UTOP 43
E Fe 3
UTOP 45
E Fe 3
UTOP 52
E Fe 3
UTOP 55
E Fe 4
TOOLDUR
E Fe 4
E DUR 250
E Fe 3
E DUR 300
E Fe 1
E DUR 400
E Fe 3
E DUR 500
E Fe 3
E DUR 600
E Fe 8
E DUR 60 R
E Fe 8
E DUR 600 Si
E Fe 8
TOOLDUR Co
E Fe 3
E DUR Cr 13
E Fe 8
Electrodes, producing abrasion resistant deposit
ABRADUR 54
E Fe 8
ABRADUR 58
E Fe 14
ABRADUR 60
E Fe 14
ABRADUR 64
E Fe 15
ABRADUR 65
E Fe 16
ABRADUR 66
E Fe 16
CrWC 600
E Fe 16
Manganese alloyed hardfacing electrodes
E Mn 14
E Fe 9
E Mn 14 Cr 4
E Fe 9
E Mn 17 Cr 13
E Fe 9
E Mn 17 Cr 10 Nb 3
E Fe 9
High cobalt alloyed electrodes and rods Durostels
DUROSTEL 1 E
DUROSTEL 1 P
DUROSTEL 6 E
DUROSTEL 6 P
DUROSTEL 12 E
DUROSTEL 12 P
DUROSTEL 21 E
DUROSTEL 21 P
DUROSTEL F P
EN ISO 1071
Cast Iron electrodes
MONEL
EC NiCu-1
MONEL C
EC NiCu-1
SUPER Ni
EC Ni-Cl-1
CAST Ni
EC Ni-Cl-1
CAST Ni C
EC Ni-Cl-1
CAST NiFe
EC NiFe-Cl-1
CAST NiFe C
EC NiFe-Cl-1
CAST NiFe B
EC NiFe-Cl-1
CAST NiFe BC
EC NiFe-Cl-1
CAST NiFe 10
CAST Fe
EC St 1
SL 250
EC FeC-2-7
DIN
AWS
Page
DIN 8555
A-5.13
E 3-UM-40-T
E 3-UM-400-PT
E 3-UM-45-T
E 3-UM-60-T
E 6-UM-60-T
E 4-UM-60-65 S
E 1-UM-250
E 1-UM-300
E 1-UM-400
E 1-UM-50
E 6-UM-60
E 6-UM-55
E 6-UM-55
~ E3-UM-50 CTZ
E 5-UM-CGP
/
/
/
/
/
E Fe 5-B
/
/
/
/
/
/
/
/
K1
K2
K3
K4
K5
K6
K7
K8
K9
K10
K11
K12
K13
K14
K15
E 6-UM-55-G
~ E 10-UM-60-G2
E 10-UM-60-GR
~ E 10-UM-65-GR
~ E 10-UM-65-G
E 10-UM-65-GR
E 10-UM-60-C
/
/
/
/
/
/
/
L1
L2
L3
L4
L5
L6
L7
E 7-UM-200-KP
~ E 7-UM-200-KP
/
/
/
/
/
/
M1
M2
M3
M4
E 20-UM-55-ZCT
R Co Cr-C
E Co Cr-C
E 20-UM-40-ZCT
R Co Cr-A
G/WSG-20-GO-45-ZCT
E Co Cr-A
E 20-UM-50-ZCT
R Co Cr-B
G/WSG-20-GO-50-ZCT
E Co Cr-B
E 20-UM-300-CKZT
/
G/WSG-20-GO-300-CKZT /
G/WSG-20-GO-40-ZCT
/
G/WSG-20-GO-55-ZCT
DIN 8573
A-5.15
E NiCu BG12
E NiCu G13
E Ni BG12
E Ni BG12
E Ni BG13
E NiFe BG12
E NiFe BG13
E NiFe BG12
E NiFe BG13
~E Ni BG12
~E Fe-1 S21
E (FeC-2) BG 49
E NiCu-B
E NiCu-B
E Ni-Cl
E Ni-Cl
E Ni-Cl
E NiFe-Cl
E NiFe-Cl
E NiFe-Cl
E NiFe-Cl
~E Ni-Cl
~E St
/
N1
N2
N3
N4
N5
N6
N7
N8
N9
O1
O2
O3
O4
O5
O6
O7
O8
09
O10
O11
O12
I3
PRODUCT PROGRAMME
d.o.o.
PRODUCT
EN
EN ISO 1071
Electrodes for welding copper and aluminium alloys
BRON CuSn
E CuSn 2 B2
E CuAl 2 B2
BRON CuAl
E CuAlMn 2 B2
BRON CuMn
EL Cu
DIN
TIG CrMo
TIG 2 CrMo
TIG VAC 60
TIG VAC 65
TIG 19/9 NbSi
TIG 19/9 NC Si
TIG 19/12/3 NbSi
TIG 19/12/3 NC Si
TIG 25/14 NC Si
TIG 18/8/6 Si
TIG 25/20
TIG 29/9
TIG 70/15
I4
W 46 2 W2Mo
W MoSi *
W CrMo1Si *
W CrMo2Si *
W
W
W
W
W
W
W
W
W
W
42 5 W3Si1
46 4 W4Si1
19 9 Nb Si **
19 9 L Si **
19 12 3 Nb Si **
19 12 3 L Si **
23 12 L Si **
18 8 Mn **
25 20 **
29 9 **
Page
A-5.6
E CuSn-7
E CuAl-8
E 31-200cn *
~ E CuMn2
E CuSn-A
E CuAl-A2
~ E CuMnNiAl
~ ECu
P1
P2
P3
P4
A-5.3
E-1100
E-3003
E-4043
/
P5
P6
P7
P8
DIN 1732
ALU 99.5
EL-Al 99.5
ALU Mn
EL-Al Mn
ALU 5 Si
EL-Al Si5
ALU 12 Si
EL-AlSi 12
Electrodes for cutting, gouging and preheating
SEKATOR 1
/
/
SEKATOR 2 A
/
/
SEKATOR 2 B
/
/
TERMO
/
EN 760
DIN 32 522
Agglomerated welding fluxes and wires for S.A. welding
AR 18.5
SA AR 188 AC
AR D1
SA AR 197 AC
AR 18.1
SA AR 188 AC
AB 100
SA AB 176 AC H5
FB TT
SA FB 155 AC H5
FB 12.2
SA FB 165 AC H5
FB CrNi
SA FB 263 DC
CS Cr 6
SA CS 196 AC
CS CrNi
SA CS 24994 AC
AB Cr
SA AB 2B 5654 AC
CS 350
SA CS 3 C0,2 Cr3 AC
FB 33
SA AF 25635 DC
AB 123
SA AB 167 AC H5
MS 200
SA MS 188 AC
EN ISO
636-A / 21952-A *
636-B / 21952-B *
14343-A **
14343-B ***
18274 ***
Welding rods for TIG welding
TIG Mo
AWS
W 55 2 W2M3
W 1M3 *
W 1CM3 *
W 2C1M3 *
W 49 5 W6
W 55A 4 W6
SS 347 Si **
SS 308 LSi **
~SS 318 **
SS 316 LSi **
SS 309 LSi **
~SS 307 **
SS 310 **
SS 312 **
/
/
/
/
/
A-5.17
Q1
Q2
Q3
Q4
F7 A0EM 12K
F7 A0EM 12K
F7 A2EM 12K
F6 A2EM 12K
F6 A4EM 12K
F6 A4EM 12K
/
/
/
/
/
/
F6 A4-EM12K
F7 A2-EM12K
R1
R2
R3
R4
R5
R6
R7
R8
R9
R10
R11
R12
R13
R14
A-5.9 / A-5.28*
A-5.14 ** /
A-5.18 ***
ER 70 S-A1 *
S1
ER 80 S-G *
ER 90S-G
ER70 S-6 ***
ER70 S-6 ***
ER 347 Si
ER 308 L Si
ER 318 Si
ER 316 L Si
ER 309 L Si
~ ER 307
ER 310
ER 312
ER NiCr-3 **
S2
S3
S4
S5
S13
S14
S15
S16
S17
S18
S19
S20
S21
PRODUCT
PRODUCT PROGRAMME
PROGRAMME
d.o.o.
PRODUCT PROGRAMME
SS 2209 DIN
**
/
EN
14700
DIN
8555**
W
9 324373
NL **
SS 2209
EN22
ISO
SS-Cu
Ni 6625
(NiCr22Mo9Nb)***
/
1898
(CuSn1)
E
FeISO
36100
E 3-UM-40-T
EN
24373
S-Cu
(CuAl7)
E
Fe 31898
S-Cu
S-Cu
5180 (CuSn1)
(CuSn5P) E 3-UM-400-PT
E
Fe 3
E 3-UM-45-T
S-Cu
S-Cu 6100
1897 (CuAl7)
(CuAg1)
E Fe 3
E 3-UM-60-T
S-Cu 5180
(CuSn5P)
ES-Cu
Fe 46338
E 6-UM-60-T
(CuMn13Al8Fe3Ni2)
S-Cu
E
Fe 41897 (CuAg1)
E 4-UM-60-65 S
S-Cu
6560
S-Cu
E
Fe 36338
E 1-UM-250
(CuSi3Mn1)
(CuMn13Al8Fe3Ni2)
E DUR 300
E
Fe 1
E 1-UM-300
S-Cu
6560
TIG
CuSi3
E
DUR
400
E Fe 3
1-UM-400
PRODUCT
EN E
ISO
(CuSi3Mn1)
E DUR 500
E Fe 3
E 1-UM-50
E DUR 600
E14341-A
Fe 8
E14341-B
6-UM-60
PRODUCT
EN ISO
EWelding
DUR 60wires
R
E 6-UM-55
for MAG (CO2) weldingE Fe 8
EVAC
DUR
E
E
14341-A
14341-B
60600 Si
GFe
4285 M/C G 3 Si1
G6-UM-55
49A 5 M/C G6
TOOLDUR
Co for MAG (CO2) welding
EGFe
~GE3-UM-50
4634 M/C G 4 Si1
55A 4 M/CCTZ
G6
Welding
VAC 65 wires
E
DUR Cr 13
E
Fe 8
E
5-UM-CGP
VAC
G
G
VAC 60
60 Ni
G 42
46 54 M/C
M/C G
G 33 Si1
Ni1
G 49A
55A 54 M/C
M/C G6
GN2
Electrodes,
deposit
G
4642
42
M/C
G 4 G3Si1
Si1
G
55A
42
M/C
G6 G11
VAC 65
60 Ti producing abrasion resistant
~G
M/A/C
~G
49A
M/A/C
VAC
ABRADUR
54
E
Fe
8
E
6-UM-55-G
G
42
2
M/C
G
0
G
49A
2
M/C
G0
VAC
60
CuNi
VAC 60 Ni
G 46 4 M/C G 3 Ni1
G 55A 4 M/C GN2
ABRADUR
E
~
10-UM-60-G2
VAC 60 Ti 58
~GFe42142 M/A/C G3Si1
~GE 49A
2 M/A/C G11
EN ISO
ABRADUR
60
E
Fe
14
E
10-UM-60-GR
G
42
2
M/C
G
0
49A 2 M/C
G0
VAC 60 CuNi
16834-A / 14343-A * G
16834-B
/ 14343-B
*
ABRADUR 64
E Fe 15
~ E 10-UM-65-GR
21952-A **
21952-B **
EN ISO
ABRADUR 65
E Fe 16
~ E 10-UM-65-G
18274 ***/ 14343-A *
16834-A
16834-B
/ 14343-B *
ABRADUR 66
E
Fe 16
E
10-UM-65-GR
Welding
21952-A
21952-B
**
CrWC
600wires for GMA welding
E
Fe 16 **
E
10-UM-60-C
18274
MIG Mo
G MoSi*****
G 1M3 **
Manganese
alloyed hardfacing electrodes
G CrMo1Si **
/
Welding
MIG
E
Mn CrMo
14 wires for GMA welding
E Fe 9
E 7-UM-200-KP
MIG
G
MoSi
G
**
GFe
CrMo2Si
/ E1M3
MIG
214
CrMo
E
MnMo
Cr 4
E
9 ** **
~
7-UM-200-KP
G
CrMo1Si
**
MIG
MIG
65
GFe
5592 A Mn3Ni1Mo
E
MnCrMo
17 Cr 13
E
//G 62A 2 N2M2T
G
CrMo2Si
**
MIG
GFe
6994 Mn3Ni1CrMo
MIG
CrMo
E
Mn275
17
Cr 10 Nb 3
E
/G 69A 2 N2M2T
G
89 26 AMMn3Ni1Mo
Mn4Ni2CrMo G
G 62A
83A 26 N2M2T
M N4M4T
MIG
MIG 65
90
High
cobalt alloyed electrodes and rodsG
55
Durostels
MIG
G
G
69A
G 69
17*4 Mn3Ni1CrMo
SS
4302 *N2M2T
MIG 75
17
E
20-UM-55-ZCT
DUROSTEL
1E
G
G
83A
M *N4M4T
MIG
MIG 90
19/9 Nb1Si
G 89
19 69 M
NbMn4Ni2CrMo
Si *
SS
3476 Si
G/WSG-20-GO-55-ZCT
DUROSTEL
P
G
SS
430
MIG 17
19/9 NC Si
G 17*
19 9 L Si *
SS
308 *LSi *
MIG
E
20-UM-40-ZCT
DUROSTEL
6E
MIG 19/9
19/12/3
Nb Si
G 19
19 912
Nb* Si *
~SS
318
MIG
Nb Si
G
Nb3 Si
SS
347
Si**
G/WSG-20-GO-45-ZCT
DUROSTEL 6 P
MIG 19/9
19/12/3
G 19
19 912
SS 308
316 LSi
LSi **
MIG
NC NC
Si Si
G
L3
SiL* Si *
SS
ESS
20-UM-50-ZCT
DUROSTEL
12
E
MIG
25/14
NC
Si
G
23
12
L
Si
*
309
MIG 19/12/3 Nb Si
G 19 12 3 Nb Si *
~SS 318LSi
* *
G/WSG-20-GO-50-ZCT
DUROSTEL
12
MIG 19/12/3
18/8/6 Si
G 19
18 12
8 Mn
~SS
307
MIG
NCPSi
G
3 L*Si *
SS
316
LSi *
E
20-UM-300-CKZT
MIG 25/14
25/20 NC
G 23
25 12
20 L* Si *
SS
310 LSi *
DUROSTEL
21SiE
MIG
G
SS
309
G/WSG-20-GO-300-CKZT
MIG 18/8/6
29/9 Si21 P
G 18
29 89 Mn
* *
SS 312
MIG
G
~SS
307
DUROSTEL
/ 310
S 25
Ni 6076
MIG
G
20 * (NiCr20) *** G/WSG-20-GO-40-ZCT
SS
MIG 25/20
70/15 F P
DUROSTEL
MIG
G
99*1071
SS
/ 312
W29
22
3 NL **
MIG 29/9
22/9/3 LN
EN
ISO
DIN
8573
SS Ni
6076
(NiCr20) *** //
MIG
Ni 6625
(NiCr22Mo9Nb)***
MIG 70/15
625
Cast
Iron electrodes
/
W
9 324373
NL **
MIG 22/9/3 LN
EN22
ISO
MONEL
EC
NiCu-1
E NiCu BG12
SS-Cu
Ni NiCu-1
6625
(NiCr22Mo9Nb)***
/ NiCu G13
MIG
1898
(CuSn1)
MONEL
EC
E
MIG 625
Cu C
TIG 22/9/3 LN PRODUCT
TIG 625
TIG 22/9/3 LN
Hardfacing
electrodes
TIG
TIG 625
Cu
UTOP
38
TIG CuAl8
UTOP
43
TIG
TIG Cu
CuSn6
UTOP 45
TIG
TIG CuAl8
CuAg
UTOP
52
TIG
TIG CuSn6
CuMn
UTOP
55
TIG CuAg
TOOLDUR
TIG
CuSi3
TIG
CuMn
E
DUR
250
W 22 9 3 NL
EN **
S Ni 6625 (NiCr22Mo9Nb)***
EN
ISO
24373
SUPER
Ni
EC
Ni-Cl-1
S-Cu
6100
(CuAl7)
MIG CuAl8
CAST
Ni
EC
Ni-Cl-1
S-Cu
1898
MIG
S-Cu
5180 (CuSn1)
(CuSn5P)
MIG Cu
CuSn6
CAST
Ni C
EC
Ni-Cl-1 (CuAl7)
S-Cu
MIG
S-Cu 6100
1897 (CuAg1)
MIG CuAl8
CuAg
CAST NiFe
EC
NiFe-Cl-1
S-Cu
MIG
S-Cu 5180
6338 (CuSn5P)
MIG CuSn6
CuMn
CAST
NiFe C
EC NiFe-Cl-1
(CuMn13Al8Fe3Ni2)
S-Cu
1897 (CuAg1)
MIG CuAg
CAST
NiFe B
EC NiFe-Cl-1
S-Cu 6338
6560
MIG CuMn
CuSi3
S-Cu
MIG
EC
CAST
NiFe BC
NiFe-Cl-1
(CuSi3Mn1)
(CuMn13Al8Fe3Ni2)
CAST NiFe 10
EN 126560
536
S-Cu
MIG CuSi3
CAST
Fe
EC
St 1
(CuSi3Mn1)
Welding
SL
250 rods for oxyacetilene- welding EC FeC-2-7
EN
VP 37
O I 12 536
Welding rods for oxyacetilene- welding
VP 37
OI
ER 2209
AWS
ER NiCrMo-3 **
A-5.13
ER
2209
A-5.7
ER
**
ER NiCrMo-3
CuSn
/A-5.7
ER CuAl-A1
/ER
ER CuSn
CuSn-A
/ER CuAl-A1
/
/
ER CuSn-A
//
/ Fe 5-B
E
ER CuSi-A
//
E Ni BG12
E Ni BG12
E Ni BG13
E NiFe BG12
E NiFe BG13
E NiFe BG12
E NiFe BG13
~E Ni BG12
DIN 8554
~E Fe-1 S21
E (FeC-2) BG 49
DIN
G I 8554
/
/ER CuSi-A
AWS
/
/A-5.18/A-5.28*
AWS
/
/A-5.18/A-5.28*
ER 70 S-6
ER 70 S-6
/ER 70 S-6
~ ER 80 S-Ni1*
ER
ER 70
70 S-6
S-2
/~ER
ER8080S-G*
S-Ni1*
/ER 70 S-2
/ER 80 S-G*
A-5.9 / A-5.28 *
/
A-5.14**
/
/A-5.9 / A-5.28 *
/A-5.14**
ER 70 S-A1 *
ER 80 S-G *
/
S-A1* *
ER 70
90S-G
/ER
ER 80
80 S-G
S-Ni *1 *
/ER
* *
ER 90S-G
100 S-1
/ER
ER 80
120
S-11* *
ER
S-Ni
ER
100
S-1 *
ER
430
R
Co
Cr-C
ER
120
S-1
ER
347
Si *
E
Co
Cr-C
ER
430
ER
308
L Si
R
Co
Cr-A
ER 347
318 Si
Si
ER
E
Co Cr-A
ER
316
Si
ER 308 LL Si
RER
Co309
Cr-B
L Si
ER 318 Si
E
Co
Cr-B
ER
307
ER
316
L Si
/ER
ER 309
310 L Si
ER 307
312
/ER
ER 310
NiCr-3 **
/ER
ER
ER 312
2209
A-5.15
ER
** **
ER NiCr-3
NiCrMo-3
ER
2209
A-5.7
E
NiCu-B
ER
NiCrMo-3
**
ER
CuSn
E
NiCu-B
A-5.7
E
Ni-Cl
ER
CuAl-A1
E
Ni-Cl
ER
CuSn
ER
CuSn-A
E
Ni-Cl
ER
/ CuAl-A1
E
NiFe-Cl
ER
/ CuSn-A
E NiFe-Cl
/
E NiFe-Cl
CuSi-A
/ER
E
NiFe-Cl
~E Ni-Cl
A-5.2
ER
CuSi-A
~E
St
/
A-5.2
R 45
GI
R 45
S22
Page
S23
S22
S23
S24
K1
S25
K2
S24
S26
K3
S25
S27
K4
S26
S28
K5
S27
K6
S29
S28
K7
K8
S29
K9
Page
K10
K11
Page
K12
K13
S4
K14
S5
K15
S4
S6
S5
S7
L1
S8
S6
L2
S7
L3
S8
L4
L5
L6
L7
S1
S2
M1
S1
S3
M2
S2
S9
M3
S3
S10
M4
S11
S9
S10
S12
N1
S11
S13
N2
S12
S14
N3
S15
S13
N4
S16
S14
N5
S17
S15
N6
S18
S16
N7
S19
S17
S20
N8
S18
S21
S19
N9
S20
S22
S21
S23
S22
O1
S23
S24
O2
O3
S25
O4
S24
S26
O5
S25
S27
O6
S26
S28
O7
S27
O8
S29
S28
09
O10
S29
O11
O12
T1
I3
I5
T1I5
I5
MIG 25/20
MIG 29/9
MIG 70/15
MIG 22/9/3 LN
MIG 625
G 25 20 *
G 29 9 *
S Ni 6076 (NiCr20) ***
W 22 9 3 NL **
S Ni 6625 (NiCr22Mo9Nb)***
SS 310
SS 312
/
/
/
ER 310
ER 312
ER NiCr-3 **
ER 2209
ER NiCrMo-3 **
A-5.7
ER CuSn
ER CuAl-A1
ER CuSn-A
/
/
S19
S20
S21
S22
S23
EN ISO 24373
S-Cu 1898 (CuSn1)
S24
S-Cu 6100 (CuAl7)
S25
S-Cu 5180 (CuSn5P)
S26
S-CuPRODUCT
1897 (CuAg1)
S27
PROGRAMME
d.o.o.
PRODUCT
PROGRAMME
S-Cu 6338
S28
(CuMn13Al8Fe3Ni2)
S-Cu
ER
CuSi-A
S29
MIG
CuSi3
VP 40
O II 6560
G II
R 60
T2
PRODUCT
PROGRAMME
PRODUCT
EN
DIN
AWS
Page
(CuSi3Mn1)
VP 42
O III
G III
R 60
T3
EN
12 536
DIN
8554
A-5.2
VP Mo
O IV
G IV8555
R 65
T4
EN
14700
DIN
A-5.13
PRODUCT
PROGRAMME
Welding
for oxyacetilene- welding
OOVII
GGVII
RR65
T5
VPCrMo
40 rods
60
T2
VP
Hardfacing
electrodes
VP
O
I III
G
I III8557* / DIN 8556 /R
T1
VP37
4238
OFe
G3-UM-40-T
R45
60 /A-5.23*
T3
EN
14171*
/ EN 12072 E
DIN
A-5.17
UTOP
E
3
K1
VP40
Mo
OFe
R60
65
T4
VP
O
IIIV
GG3-UM-400-PT
IIIV
T2
EN
10
/A-5.9**
UTOP
43
E
3 088**
E
/R
K2
65
T5I5
VP
OOFe
IIIV 3
GG3-UM-45-T
IIIV
T3
VP42
CrMo
UTOP
45
E
E
/RR60
K3
Wires
and strips for submerged arc welding
VP
Mo
O
IV
G
IV
R
65
T4
EN
14171*
/
EN
12072
DIN
8557*
/
DIN
8556
A-5.17
/A-5.23*
UTOP
52
E
Fe
3
E
3-UM-60-T
/
K4
EPP 2
S2 *
S2 *
EM 12 K
O
V
G
V
652 *
T5
VP
CrMo
10
/A-5.9**
UTOP
E
Fe
4 088**
E
/R
K5
EPP
255
Mo
SEN
2 Mo
*
S 6-UM-60-T
2 Mo *
EA
TOOLDUR
E
Fe
4
E
4-UM-60-65
S
E
Fe13
5-B
K6
EN
14171*
/
EN
12072
DIN
8557*
/
DIN
8556
A-5.17
/A-5.23*
Wires
EPP
3 and strips for submerged arc welding
S3 *
S3 *
EM
K
EEPP
DUR
E
3* 088**
ES1-UM-250
//A-5.9**
K7
EN
XSFe
6210
Cr
17**
ER
**
EPP
2250
2 *
EM430
12 K
17
Cr
E
DUR
300
ESSFe
19 L *
EUP
/ER
K8
Wires
strips for submerged arcwelding
EPP
2and
MoNC
2 Mo
S1-UM-300
2X2
MoCrNi
* 19 9
EA308
2 * L **
19
EPP
19/9
U1
E
DUR
E
E
K9
EPP
3400 NC
3*312
* 3L
S1-UM-400
EM12
13KK
EPP
219/12/3
SSSFe
219
SUP
23X2
* * CrNiMo 19 12 /EM
ER
316
L **
EPP
E
DUR
500
3 17**
E
1-UM-50
/ ER2 430
K10
6Mo
Cr
EPP
217
Mo
SSXFe
218
*
SUP
2 Mo
* ****
EPP
Cr
E
8 Mn
X 15* CrNiMn 18 8 EA
ER 307
EPP
18/8/6
E
DUR 600
E
E
6-UM-60
/EM
K11
EPP
SSFe
319
*89 L
SUP
3 *X2 CrNi 19 9
13 K
EPP319/9
X8 Cr 18
/ ER 308 L **
INOX
TR
CrNC
17
X/ 6
U1
E
DUR
60
FeCr8 17**
EUP
6-UM-55
/ER
K12
430
**L **
EPP
17
Cr R NC
E
S
19
12
3
L
UP
X2
CrNiMo
19
12
ER
316
EPP
19/12/3
UP
X2 CrNi 19 9
/
19/9
EINOX
DURTR
600
Si
E/ Fe 9
8L
E
6-UM-55
K13
UP
X2
CrNi
19 9 18 8 /ER
308
L****
EPP
19/9
NC
SS19
18
8
Mn
UP
X
15
CrNiMn
ER
307
EPP
18/8/6
U1
TOOLDUR Co
E Fe 3
~ E3-UM-50 CTZ
K14
S/ 19 12 3 L
UP X2
EPP
19/12/3
E
X8CrNiMo
Cr 18 19 12 /ER
/ 316 L **
INOX
TR
CrNC
17
E
DUR
Cr 13
Fe 8
EUP
5-UM-CGP
K15
S
18
8
Mn
UP
X
15
CrNiMn
18
8
ER
307
**
EPP
18/8/6
/
UP
X2
CrNi
19
9
/
INOX TR 19/9
Electrodes,
producing abrasion resistant
deposit
Non-standard
wires and electrodes,
available
only on customers
request.
/
UP
X8
Cr
18
/
INOX
TR
Cr
17
ABRADUR 54
E Fe 8
E 6-UM-55-G
/
L1
/ Fe 14
UP
CrNi 19 9
INOX TR 19/9
ABRADUR
58
E
~
E X2
10-UM-60-G2
//
L2
ABRADUR 60
E Fe PRODUCT
14
E 10-UM-60-GR
/
L3
PROGRAMME
ABRADUR
Non-standard
wires
and
electrodes,
available
only
on
customers
request.
64
E Fe 15
~ E 10-UM-65-GR
/
L4
ABRADURPRODUCT
65
E Fe 16
/
L5
EN ISO ~ E 10-UM-65-G
AWS
Page
Non-standard
wires
and
electrodes,
available
only
on
customers
request.
ABRADUR 66
E Fe 16
E 10-UM-65-GR
/
L6
Flux
cored wires for MIG MAG welding
CrWC 600
E Fe 16
E 10-UM-60-C
/
L7
Metalic type
17632-A / 18276-A *
17632-B / 18276-B *
A-5.18/A-5.19*
Manganese alloyed hardfacing electrodes
A-5.20/A-5.29*
E Mn 14
E Fe 9
E 7-UM-200-KP
/
M1
FILTUB 12 M
T 46 4 MM1 H5
T554T151MA H5
E 70C-6MH4
V1
E Mn 14 Cr 4
E Fe 9
~ E 7-UM-200-KP
/E 71 T-1 M
M2
E Mn 17 Cr 13
E Fe 9
/
/
M3
FILTUB 28 M
T 55 61NiMoMM1H5*
T62 6T15-1MN2M2H5 *
E 90 C-K3MH4*
V2
E Mn 17 Cr 10 Nb 3
E Fe 9
/
/
M4
FILTUB 32 M
T 694Mn2NiCrMoMM1H5* T764T5-1MA-N4C1M2H5 * E 110C-K4H4*
V3
High cobalt alloyed electrodes and rods Durostels
E 111T1-K4H4*
E 20-UM-55-ZCT
R Co Cr-C
N1
DUROSTEL
1
E
FILTUB 38 M
T 894Mn2NiCrMoMM1H5* T834T151MN4C1M5H5 *
E 120C-K4H4*
V4
G/WSG-20-GO-55-ZCT
EA-5.29/A-5.20
Co Cr-C
N2
DUROSTEL
Rutile
type 1 P
17632-A
/ 17634-A *
17632-B / 17634-B *
*
E
20-UM-40-ZCT
R
Co
Cr-A
N3
DUROSTEL
6
E
FILTUB 4 R
T 46 4 C/M1 H5
T 554T1-C/M/A H10
E 71 T-1 *
V5
G/WSG-20-GO-45-ZCT
N4
DUROSTEL
FILTUB
5R 6P
T 504ZP
C/M1 H5
T554T1-1C/M/A-NCC1
H5 EE Co
71 Cr-A
T1-G
V6
E 20-UM-50-ZCT
R
N5
FILTUB
6 R 12 E
T 42 AZ PC/M 1 H5
T 49YT1-1C/M/A-G
H5
E Co
71 Cr-B
T1-G
V7
DUROSTEL
FILTUB
7 R 12 P
T 46 6 1Ni PM1 H5
T556T1-1MA-N1
H5
81 Cr-B
T1-Ni 1
V8
G/WSG-20-GO-50-ZCT
EE Co
N6
DUROSTEL
T 46AMoPM1
H5
T55YT1-1MA-2M3
H5
V9
E 20-UM-300-CKZT
/E 81 T1-A1
N7
DUROSTEL
FILTUB
8 R 21 E
T MoP C/M1 H5 *
T49T1-1C/M-2M3
H5*
G/WSG-20-GO-300-CKZT /
N8
DUROSTEL 21 P
FILTUB 32 R
T 69 6 ZPM11H5*
T76 6T1-1MN4M1H5 *
E 111T1V10
G/WSG-20-GO-40-ZCT
/
N9
DUROSTEL F P
K4MJH8*
MIG Cu
MIG CuAl8
MIG CuSn6
MIG CuAg
MIG CuMn
Basic type
Cast Iron electrodes
MONEL12 B
FILTUB
MONEL C
FILTUB 14 B
SUPER Ni
CAST Ni16 B
FILTUB
CAST Ni18CB
FILTUB
CAST NiFe
FILTUB
19 B
CAST NiFe
FILTUB
25 BC
CAST NiFe
FILTUB
28 BB
CAST NiFe
FILTUB
32 BBC
CAST NiFe
FILTUB
36 B10
CAST Fe
FILTUB
38 B
SL 250 40 B
FILTUB
FILTUB 42 B
For
I6 hardfacing
I6 DUR 3
FILTUB
FILTUB DUR 4
ISO 1071
17632-A EN
/ 17634-A
*
18276-A **
EC NiCu-1
T 42 4B M/C3
H5
EC NiCu-1
T 464MoBC/M3
H5
EC H5
Ni-Cl-1
T MoBC/M1
*
Ni-Cl-1
T CrMo1 EC
BM/C3
H5 *
Ni-Cl-1
T CrMo2 EC
BM/C3
H5 *
EC NiFe-Cl-1
/
EC NiFe-Cl-1
/
EC NiFe-Cl-1
T5561NiMoBC/M3
H5**
EC NiFe-Cl-1
T696Mn2NiCrMoBM/C3H5**
T 42 8 2Ni B M3 H5
EC St 1
T894Mn2Ni1CrMoBM3H5**
EC FeC-2-7
~T466ZBM/C3
H5
/
EN 14 700
T Fe 1
T Fe 1
DIN 8573
17632-B
/ 17634-B *
18276-B **
E NiCu BG12
T49 4T5.3M/C/A-2M3H5
E NiCu G13
T554T53M/CA-2M3H5
E Ni BG12 H5*
T49T5-0M/C-2M3
E Ni BG12
T55T5-0M/C-1CM-H5*
T62T5-0M/C-2C1M-H5*
E Ni BG13
E NiFe BG12
/
E NiFe BG13
/
E NiFe BG12
T626T4-3C/M-N2M2H5**
E NiFe BG13
T766T5-3M/C/A-N4C1M2H5**
~E Ni BG12
T498T5-3MA-N5H5
~E Fe-1 S21
T834T5-3MA-N4C2M2H5**
E (FeC-2) BG 49H5
~T556T5-3M/C/A-G
/
DIN 8555
A-5.15
A-5.29/A-5.20 *
EE NiCu-B
70 T-5 M4 *
EE NiCu-B
80 T5-G
E Ni-Cl
EE Ni-Cl
80 T5-B2
EE Ni-Cl
80 T5-G
EE NiFe-Cl
90 T5-G
EE NiFe-Cl
90 T5-G
EE NiFe-Cl
90 T5-G
EE NiFe-Cl
110 T5-K4
~E
Ni-Cl
E 90
T5-G
~E
St T5-G
E 120
/E 80 T5-G
E 110 T5-G
MSG1-GF-M21-250/MSG1-GF-C1-250
MSG1-GF-M21-300/MSG1-GF-C1-300
O1
V11
O2
V12
O3
O4
V13
O5
V14
O6
V15
O7
V16
O8
V17
09
V18
O10
V19
O11
V20
O12
V21
V22
I3
V23
V24
FILTUB 12 B
FILTUB 14 B
18276-A **
T 42 4B M/C3 H5
T 464MoBC/M3 H5
T MoBC/M1 H5 *
T CrMo1 BM/C3 H5 *
T CrMo2 BM/C3 H5 *
/
/
T5561NiMoBC/M3 H5**
18276-B **
T49 4T5.3M/C/A-2M3H5
T554T53M/CA-2M3H5
T49T5-0M/C-2M3 H5*
T55T5-0M/C-1CM-H5*
E 70 T-5 M4 *
E 80 T5-G
FILTUB 16 B
E 80 T5-B2
T62T5-0M/C-2C1M-H5*
FILTUB 18 B
E 80 T5-G
FILTUB 19 B
/
E 90 T5-G
FILTUB 25 B
/
E 90 T5-G
T626T4-3C/M-N2M2H5**
FILTUB 28 B
E 90 T5-G
T696Mn2NiCrMoBM/C3H5** T766T5-3M/C/A-N4C1M2H5** E 110 T5-K4
FILTUB 32 B
FILTUB 36 B
T 42 8 2Ni B M3 H5
T498T5-3MA-N5H5
E 90 T5-G
T894Mn2Ni1CrMoBM3H5**
T834T5-3MA-N4C2M2H5**
PRODUCT
PROGRAMME E 120 T5-G
FILTUB 38 B
d.o.o.
FILTUB 40 B
~T466ZBM/C3 H5
~T556T5-3M/C/A-G H5
E 80 T5-G
EN ISO
FILTUB 42PRODUCT
B
/
/
E 110AWS
T5-G
Flux
cored wires for MIG MAG
For hardfacing
ENwelding
14 700
DIN 8555
MSG1-GF-M21-250/MSG1-GF-C1-250
FILTUB type
DUR 3
T Fe 1 / 18276-A *
Metalic
17632-A
17632-B
/ 18276-B *
A-5.18/A-5.19*
MSG1-GF-M21-300/MSG1-GF-C1-300
A-5.20/A-5.29*
FILTUB DUR 4
T Fe 1
MSG1-GF-M21-350/MSG1-GF-C1-350-P
FILTUB DUR
T Fe
1 MM1 H5
12 M 5
46 4
T554T151MA
H5
E 70C-6MH4
MSG5-GF-M21-40-P/MSG5-GF-C1-40-P
FILTUB DUR 12
T Fe 2
E 71 T-1 M
MSG6-GF-M21-55-GP/MSG6-GF-L1-55-GP
DUR
Fe 61NiMoMM1H5*
2
FILTUB 28
M 14
T 55
T62 6T15-1MN2M2H5
*
E 90 C-K3MH4*
MSG5 -GF-M21-50-P/MSG5-GF-C1-50-P
FILTUB DUR
T Fe
3
32 M 15
694Mn2NiCrMoMM1H5*
T764T5-1MA-N4C1M2H5
* E 110C-K4H4*
MSG5 -GF-M21-50-P/MSG5-GF-C1-50-P
FILTUB DUR 15.1
T Fe 3
E 111T1-K4H4*
MSG6-GF-M21-60-GP/MSG6-GF-C1-60-GP
FILTUB 38
DUR
T 894Mn2NiCrMoMM1H5*
Fe 2
FILTUB
M 16
T
T834T151MN4C1M5H5
*
E 120C-K4H4*
MSG5-GF-M21-40-P/MSG5-GF-C1-40-P
FILTUB
UTOP 38
T
Fe 3 / 17634-A *
Rutile type
17632-A
17632-B
/ 17634-B *
A-5.29/A-5.20 *
MSG6-GF-M21-55-GP/MSG6-GF-C1-55-GP
FILTUB UTOP 55
T Fe 3
FILTUB 4 R
T 46 4 C/M1 H5
T 554T1-C/M/A H10
E 71 T-1 *
MSG 6-GF-M21-55-GP/MSG6-GF-C1-55-GP
FILTUB UTOP Co
T Fe 3
FILTUB 5 R
T 504ZP C/M1 H5
T554T1-1C/M/A-NCC1 H5 E 71 T1-G
MSG 5-GF-M21-50-GP/MSG5-GF-C1-50-GP
FILTUB UTOP Mo1
T Fe 3
FILTUB 6 R
T 42 AZ PC/M 1 H5
T 49YT1-1C/M/A-G H5
E 71 T1-G
EN
14717-A/
EN ISO 24 589-B/
Flux
cored
FILTUB
7 R wires for S.A.T 46ISO
6 1Ni
PM1 H5EN ISO 24T556T1-1MA-N1
H5
E
T1-Ni 1
A 81
5.23
welding
589-A*/ EN ISO 26 304-A**
EN ISO 26 304-B*
T 46AMoPM1 H5
T55YT1-1MA-2M3 H5
E 81 T1-A1
FILTUB 8
R
112
F7 A4-EC-G
S MoP
46 4FB
T3 H5 *
T
C/M1
T49T1-1C/M-2M3 H5*
FILTUB 114
F7 A4-EC-A4
S
Mo6FB*
S 554 FB TU1M3*
FILTUB 32 R
T 69
ZPM11H5*
T76 6T1-1MN4M1H5
E 111T1FILTUB 116
F8 P0-EC-B2
K4MJH8*
FILTUB 118
F8 PO-EC-B3
17632-A / 17634-A *
17632-B / 17634-B *
Basic
type
A-5.29/A-5.20
FILTUB 126
F7 A8-EC-G *
18276-A **
18276-B **
FILTUB 128
F9 A8-EC-G
FILTUB 12 B
T 42 4B M/C3 H5
T49 4T5.3M/C/A-2M3H5
E 70 T-5 M4 *
FILTUB 132
A8-EC-F5
S 464MoBC/M3
69 6 FB T3Ni2.5NiCrMo**
S 78A6 FBTUN5CM3* F11
T
H5
T554T53M/CA-2M3H5
E 80 T5-G
FILTUB 14
136B
F7 A15-EC-Ni2
T MoBC/M1 H5 *
T49T5-0M/C-2M3 H5*
FILTUB
F12
S
89 4 FBBM/C3
T3Ni2.5Cr1Mo**
FILTUB 138
16 B
T CrMo1
H5 *
T55T5-0M/C-1CM-H5*
E 80A4-EC-G
T5-B2
FILTUB
A4-EC-G
T62T5-0M/C-2C1M-H5*
PRODUCT
PROGRAMME F7
FILTUB 140
18 B
T CrMo2 BM/C3
H5 *
E 80
T5-G
For
hardfacing
EN
14700
DIN
8555
FILTUB 19 B
/
/
E 90 T5-G
FILTUB
DUR
205
T
Fe
1
UP1-GF-BFB-165-350
FILTUB 25 B
/
/
E 90 T5-G
FILTUB
TZ
Fe 7
UP5-GF-BFB4 652-40 E 90 T5-G
T626T4-3C/M-N2M2H5**
FILTUB DUR
28 B 212
T5561NiMoBC/M3
H5**
FILTUB
DUR
214
TZ
Fe
3
UP6-BFB4
652
50
T696Mn2NiCrMoBM/C3H5** T766T5-3M/C/A-N4C1M2H5** E 110 T5-K4
FILTUB 32 B
FILTUB
DUR
T
8 2Ni B M3 H5
UP5-GF-BFB4 652-55 E 90 T5-G
FILTUB 36
B 215
T Fe
42 8
T498T5-3MA-N5H5
FILTUB
DUR
12Cr2NiMo
TZ
Fe 7
UP5-GF-BFB 165-400 E 120 T5-G
T894Mn2Ni1CrMoBM3H5**
T834T5-3MA-N4C2M2H5**
FILTUB 38 B
TZ
Fe 7
UP5-GF-BFB 165-40
FILTUB 40
DUR
B 13Cr3NiMoV
~T466ZBM/C3
H5
~T556T5-3M/C/A-G
H5
E 80 T5-G
UP5-GF-BCS 256-40 E 110 T5-G
FILTUB 42
B 17 Cr
/ Fe 7
/
DUR
TZ
For hardfacing
welding stainless steel
FILTUB DUR
FILCORD
3083L
FILTUB DUR
FILCORD
3084LI
FILTUB DUR 5
FILCORD 316 L
FILTUB DUR 12
FILCORD
31614
LI
FILTUB DUR
FILCORD
30915
L
FILTUB DUR
FILCORD
30915.1
LI
FILTUB DUR
FILTUB
DUR
FILCORD
30716
FILTUB
UTOP
FILCORD
307I 38
FILTUB UTOP 55
FILTUB UTOP Co
FILTUB
Non-standard
UTOP Mo1FCW wires,
Flux cored wires for S.A.welding
FILTUB 112
FILTUB 114
FILTUB 116
FILTUB 118
FILTUB 126
FILTUB 128
FILTUB 132
FILTUB 136
FILTUB 138
FILTUB 140
For hardfacing
EN 14 700
DIN 8555
EN ISO 17633-A
EN ISO 17633-B
MSG1-GF-M21-250/MSG1-GF-C1-250
T Fe
1 LR C/M 3
19 9
TS 308L-F B0
MSG1-GF-M21-300/MSG1-GF-C1-300
T
1 LP C/M 2
T Fe
19 9
TS 308L-F B1
MSG1-GF-M21-350/MSG1-GF-C1-350-P
T
1 3LR C/M 3
T Fe
19 12
TS 316L-F B0
MSG5-GF-M21-40-P/MSG5-GF-C1-40-P
T Fe 2
T 19 12 3LP C/M 2
TS 316L-F B1
MSG6-GF-M21-55-GP/MSG6-GF-L1-55-GP
T Fe 2
T
23
12
LR
C/M
3
TS
309LFB0
MSG5
-GF-M21-50-P/MSG5-GF-C1-50-P
T Fe 3
T
23
12
LPC/M
2
TS 309LFB1
MSG5
-GF-M21-50-P/MSG5-GF-C1-50-P
T Fe 3
MSG6-GF-M21-60-GP/MSG6-GF-C1-60-GP
T 18
R C/M3
Fe 8Mn
2
MSG5-GF-M21-40-P/MSG5-GF-C1-40-P
T Fe
3
18 8Mn
P C/M2
MSG6-GF-M21-55-GP/MSG6-GF-C1-55-GP
T Fe 3
MSG 6-GF-M21-55-GP/MSG6-GF-C1-55-GP
T Fe 3
available
only on customersMSG
request.
5-GF-M21-50-GP/MSG5-GF-C1-50-GP
T Fe 3
EN ISO 14717-A/ EN ISO 24
EN ISO 24 589-B/
A 5.23
589-A*/ EN ISO 26 304-A**
EN ISO 26 304-B*
F7 A4-EC-G
S 46 4FB T3
F7 A4-EC-A4
S Mo FB*
S 554 FB TU1M3
F8 P0-EC-B2
F8 PO-EC-B3
F7 A8-EC-G
F9 A8-EC-G
S 69 6 FB T3Ni2.5NiCrMo**
S 78A6 FBTUN5CM3* F11 A8-EC-F5
F7 A15-EC-Ni2
F12 A4-EC-G
S 89 4 FB T3Ni2.5Cr1Mo**
F7 A4-EC-G
EN 14700
DIN 8555
V11
V12
V13
V14
V15
V16
V17
V18
V19
V20
V21
Page
V22
V23
V24
V25
V1
V26
V27
V2
V28
V3
V29
V30
V4
V31
V32
V5
V33
V6
V34
V7
V8
V9
V35
V36
V10
V37
V38
V39
V40
V11
V41
V12
V42
V43
V13
V44
V14
V15
V45
V16I6
V46
V17
V47
V18
V48
V19
V49
V20
V50
V21
V51
V22
V23
V52
V24
V52
V25
V53
V26
V53
V27
V54
V28
V54
V29
V55
V30
V31
V55
V32
V33
V34
V35
V36
V37
V38
V39
V40
V41
V42
V43
V44
I6I7
d.o.o.
PRODUCT
PRODUCT PROGRAMME
EN
DIN
EN 499
DIN 1913 / 8529 *
Low alloyed cellulosic, rutile and acid electrodes
NEUTRAL
E 35 A A 13
E 43 10 A 2
RAPID
E 38 2 R A 13
E 43 33 AR 7
CELEX
E 35 2 C 21
E 43 53 C 4
CELEX Mn
E 42 3 C 21
E 51 53 C 4
CELEX Mo
E 42 3 Mo C 21
/
CELEX Ni
E 46 3 1Ni C 21
/
CELEX NiMo
E 50 3 1NiMo C 21
/
JADRAN S
E 35 0 RC 11
E 43 11 R(C) 3
RUTILEN 12
E 38 0 RC 11
E 43 22 R(C) 3
RUTILEN Z
E 42 0 RC 11
E 51 22 RR(C) 6
RUTILEN 1000 S
E 42 0 RC 11
E 51 32 RR(C) 5
EMONA
E 35 2 RB 12
E 43 43 RR(B) 7
RUTILEN 13
E 42 0 RR 12
E 51 22 RR 6
RUTILEN X
E 42 0 RR 12
E 51 22 RR 6
RUTILEN 2000 S
E 42 0 RR 12
E 51 22 RR 6
RUTILEN K
E 38 2 R 12
E 43 33 R 3
RUTILEN 13 M
E 38 0 R 12
E 43 21 R 3
RUTILEN S
E 38 0 RC 11
E 43 22 R(C)3
RUTILEN E
E 42 0 RC 11
E 51 32 R(C)3
High efficiency electrodes
SAVA 130
E 38 0 RR 33
E 43 32 RR 11 130
SAVA 150
E 38 0 RR 53
E 43 32 RR 11 150
SAVA 180
E 42 0 RR 74
E 43 32 RR 11 180
SAVA 200
E 42 0 RR 74
E 43 32 RR 11 200
SAVA GV 130
E 38 0 RR 34
E 43 32 RR 11 130
SAVA GV 160
E 38 0 RR 54
E 43 32 RR 11 160
SAVA 150 B
E 42 2 B 53
E 51 43 B 12 150
SAVA 150 AR
E 42 4 RA 53
E 51 53 AR 11 160
Basic, low hydrogen electrodes
EVB 50
E 42 4 B 32 H 5
E 51 55 B 10
EVB 55
E 42 6 B 42 H5
EY 42 76 Mn B *
EVB EXTRA
E 42 6 B 12 H10
EY 42 53 Mn B *
EVB 45
E 42 2 B 32
E 51 43 B(R) 9
EVB 47
E 38 2 B 32
E 43 55 B 10
EVB S
E 42 4 B 12 H10
E 51 43 B(R) 10
GALEB 50
E 42 2 B 32
E 51 54 B(R) 10
EVB K
E 42 2 B 12
E 51 43 B(R) 10
EN 499 / EN 757 *
DIN 8529
Medium alloyed basic electrodes for welding finegrained steels
EVB 60
E 50 2 Mo B 42
EY 5075 Mn1Mo B
E 55 6 Mn 12 NiMo B42H5 EY5576Mn1NiMoBH5
EVB 65
EVB Ni
E 50 61 Ni B 42
EY 50 75 Mn1Ni B
EVB CuNi
/
EY 50 75 CuNi B
EVB CuNiCr
E 46 4 Z B 42
/
EVB NiMo
E 50 21 NiMo B 42
EY 50 76 1 NiMo B
GALEB 70
E 50 A1 NiMo B 42
EY 50 75 1 NiMo B
EVB 2.5 Ni
E 50 2 8Ni B 32 H10
EY 50 76 2Ni B
EVB 2.5 NiMo
E 55 2 6NiMo B 42 *
EY 50 75 2 NiMo B
EVB 62
E 62 4 MnMoB42H5*
/
EVB 75
E 696Mn6NiCrMoB42*
EY 6975Mn2NiCrMoB
EVB CrNiMo
EY 62 52 1NiCrMo B
EVB 80
E 69 6Mn2NiCrMoB42* EY 6975Mn2NiCrMoB
EVB 100
E 79 4Mn2Ni1CrMoB42* EY7964Mn2Ni1CrMoB
EVB 100 EKSTRA
/
EY8975Mn2Ni1MoBH5
EVB SP2
/
E 62 4 Z B 34
I8
AWS
A-5.1 / A-5.5*
Page
/
E 6020
E 6010
E 7010-G
E 7010-A1*
E 8010-G *
E 9010-G*
E 6013
E 6012
E 6013
E 6013
E 6013
E 6013
E 6013
E 6013
E 6013
E 6013
E 6013
E 6013
A1
A2
A3
A4
A5
A6
A7
A8
A9
A10
A11
A12
A13
A14
A15
A16
A17
A18
A19
E 7024
E 7024
E 7024
E 7024
E 7024
E 7024
E 7028
E 7027
B1
B2
B3
B4
B5
B6
B7
B8
E 7018
E 7018-1
E 7016
E 7016
E 6019
E 7016
E 7016
E 7016
A-5.5
C1
C2
C3
C4
C5
C6
C7
C8
E 8018-G
E 9018-G
E 8018-C3
E 7018-G
E 7018-G
E 8018-G
E 9016-G
E 8018-C1
E 9018-G
E 10018 G
E 10018-G
E 11018 G
E 11018-G
E 12018-G
E 12018-G
/
D1
D2
D3
D4
D5
D6
D7
D8
D9
D10
D11
D12
D13
D14
D15
D16
d.o.o.
PRODUCT
PRODUCT PROGRAMME
EN
DIN
EN 1599 / EN 499 *
DIN 8575
Medium and high alloyed basic electrodes for welding creep resistant steels
E Mo B42 / E 46 2MoB42* E Mo B 26
EVB Mo
EVB MoV
E MoV B 42
E MoV B 20+
EVB CrMo
E CrMo1 B 42
E CrMo1 B 26
EVB 2 CrMo
E CrMo2 B 42
E CrMo2 B 20+
EVB P24
/
/
EVB 5 CrMo
E CrMo5 B 42
E CrMo5 B 20+
EVB 9 CrMo
E CrMo9 B 42
E CrMo9 B 20+
EVB CrMoV
E CrMoV1 B 20+
E CrMoV1 B
EVB 3 CrMoV
E Z CrMo 3V B42 H5 /
EVB 9 CrMoV
/
E CrMo91 B42
EVB 91 CrMoV
E CrMo91 B 42
/
EZCrMoWVNb911B42 H5 /
EVB 911W
EVB Mo1Cr
/
/
Medium alloyed rutile electrodes for welding creep resistant steels
E Ti Mo
E 46 A Mo R 12 *
E Mo R 22
E Ti MoV
E MoV R 12
E MoV R 22
E Ti CrMo
E CrMo1 R 12
E CrMo1 R 22
E Ti 2 CrMo
E CrMo2 R 12
E CrMo2 R 22
E Ti 5 CrMo
E CrMo5 R 12
E CrMo5 R 22
EN 1600
DIN 8556/ DIN 1736 *
High alloyed ferritic stainless steel electrodes
INOX B 13 Fe
E 13 B 43
E 13 MPB 30+ 130
INOX B 13/1 Fe
E 13 B 43
E 13 1 MPB 30+ 130
INOX B 13/4 Fe
E 13 4 B 43
E 13 4 MPB 30+ 130
INOX B 13/6 Fe
/
/
INOX B 17 Fe
E 17 B 43
E 17 MPB 30+ 130
INOX B 17 MoFe
E 17 Mo 43
E 17Mo
High alloyed austenitic and austenitic-ferritic stainless steel electrodes
INOX R 19/9 Nb
E 19 9 Nb R 12
E 19 9 Nb R 26
INOX B 19/9 Nb
E 19 9 Nb B 22
E 19 9 Nb B 20+
INOX R 19/9 NC
E 19 9 LR 12
E 19 9 LR 26
INOX R 19/12/3 Nb
E 19 12 3 Nb R 12
E 19 12 3 Nb R 26
INOX B 19/12/3 Nb
E 19 12 3 Nb B 22
E 19 12 3 Nb B 20+
INOX R 19/12/3 NC
E 19 12 3 LR 12
E 19 12 3 LR 26
INOX R 19/13/4 L
E 19 13 4 LR 12
E 19 13 4 LR 23
INOX R 22/9/3 LN
E 22 9 3 N LR 32
/
INOX R 20/10/3 L
E 20 10 3 R 12
E 20 10 3 R 23
INOX R 20/25 L
E 20 25 5 Cu NL R 32 E 20 25 5 L Cu R
INOX B 20/25 L
E 20 25 5 Cu NL B 23 E 20 25 5 L Cu B
High alloyed heat resistant stainless steel electrodes
INOX R 25/4 Fe
E 25 4 R 43
E 25 4 MPR 33 160
INOX R 25/14 NC
E 23 12 LR 32
E 23 12 LR 26
INOX R 25/14/3 NC
E 23 12 2 LR 32
E 23 13 2 LR 26
INOX R 25/20
E 25 20 R 32
E 25 20 R 26
INOX B 25/20
E 25 20 B 42
E 25 20 B 20+
High alloyed, special purpose electrodes
INOX R 22/12/3 Fe
/
/
INOX B 18/8/6
E 18 8 Mn B 22
E 18 8 Mn B 20+
INOX R 18/8/6 Fe
E 18 8 Mn R 53
E 18 8 Mn MPR33 160
INOX R 18/8/6
E 18 8 Mn R 53
E 18 8 Mn R 26
INOX R 29/9
E 29 9 R 12
E 29 9 R 26
INOX R 29/9 Fe
E 29 9 R 53
E 29 9 R 26
INOX B 70/15
/
EL NiCr 15 Fe Mn *
AWS
Page
A-5.5
E 7018-A1
E 8018-G
E 8018-B2
E 9018-B3
/
E 502-15 *
E 505-15 *
/
/
E 9016-B9
E 9018-B9
E 9018-B9
E 8016-B5
E1
E2
E3
E4
E5
E6
E7
E8
E9
E10
E11
E12
E13
E 8013-G
E 8013-G
E 8013-G
E 9013-G
E 8016-B6
A-5.4 / A-5.11*
F1
F2
F3
F4
F5
E 410-15
E 410-15
E 410 NiMo-15
/
E 430-15
E 430Mo-15
G1
G2
G3
G4
G5
G6
E 347-17
E 347-15
E 308 L-17
E 318-17
E 318-15
E 316 L-17
E 317 L-17
E 2209 L-17
E 308 MoL-17
E 385-17
E 385-15
H1
H2
H3
H4
H5
H6
H7
H8
H9
H10
H11
AISI: 446
E 309 L-17
E 309Mo L-17
E 310-16
E 310-15
I1
I2
I3
I4
I5
E 309Mo-16
E 307-15
E 307-16
E 307-17
E 312-17
E 312-26
E NiCrFe-3 *
J1
J2
J3
J4
J5
J6
J7
I9
d.o.o.
PRODUCT PROGRAMME
PRODUCT PROGRAMME
PRODUCT
EN
/
PRODUCT
EN
Hardfacing electrodes
/
UTOP 38
Hardfacing electrodes
UTOP 43
UTOP 38
UTOP 45
UTOP 43
UTOP 52
UTOP 45
UTOP 55
UTOP 52
TOOLDUR
UTOP 55
E DUR 250
TOOLDUR
E DUR 300
E DUR 250
E DUR 400
E DUR 300
E DUR 500
E DUR 400
E DUR 600
E DUR 500
E DUR 60 R
E DUR 600
E DUR 600 Si
E DUR 60 R
TOOLDUR Co
E DUR 600 Si
E DUR Cr 13
TOOLDUR Co
Electrodes, producing abrasion resistant deposit
E DUR Cr 13
ABRADUR 54
Electrodes, producing abrasion resistant deposit
ABRADUR 58
ABRADUR 54
ABRADUR 60
ABRADUR 58
ABRADUR 64
ABRADUR 60
ABRADUR 65
ABRADUR 64
ABRADUR 66
ABRADUR 65
CrWC 600
ABRADUR 66
Manganese alloyed hardfacing electrodes
CrWC 600
E Mn 14
Manganese alloyed hardfacing electrodes
E Mn 14 CR 4
E Mn 14
E Mn 17 Cr 13
E Mn 14 CR 4
E Mn 17 Cr 10 Nb 3
E Mn 17 Cr 13
High cobalt alloyed electrodes and rods Durostels
E Mn 17 Cr 10 Nb 3
DUROSTEL
E
High cobalt1alloyed
electrodes and rods Durostels
DUROSTEL
DUROSTEL11PE
DUROSTEL
DUROSTEL61EP
DUROSTEL
DUROSTEL66PE
DUROSTEL
DUROSTEL12
6 PE
DUROSTEL
DUROSTEL12
12PE
DUROSTEL
DUROSTEL21
12EP
DUROSTEL
DUROSTEL21
21PE
DUROSTEL
PP
DUROSTELF21
DUROSTEL F P
/
Cast Iron electrodes
/
MONEL
Cast Iron electrodes
MONEL C
MONEL
SUPER Ni
MONEL C
CAST Ni
SUPER Ni
CAST Ni C
CAST Ni
CAST NiFe
CAST Ni C
CAST NiFe C
CAST NiFe
CAST NiFe B
PRODUCT
CAST NiFe C
CAST NiFe BC
CAST NiFe B
CAST NiFe 10
CAST NiFe BC
CAST
SL 250Fe
CAST NiFe 10
ICAST
10 Fe
DIN
DIN 8555
DIN
DIN 8555
E 3-UM-40-T
E 3-UM-400-PT
E 3-UM-40-T
E 3-UM-45-T
E 3-UM-400-PT
E 3-UM-60-T
E 3-UM-45-T
E 6-UM-60-T
E 3-UM-60-T
E 4-UM-60-65 S
E 6-UM-60-T
E 1-UM-250
E 4-UM-60-65 S
E 1-UM-300
E 1-UM-250
E 1-UM-400
E 1-UM-300
E 1-UM-50
E 1-UM-400
E 6-UM-60
E 1-UM-50
E 6-UM-55
E 6-UM-60
E 6-UM-55
E 6-UM-55
E3-UM-50-CTZ
E 6-UM-55
E 5-UM-CGP
E3-UM-50-CTZ
E 5-UM-CGP
E 6-UM-55-G
E 10-UM-60-G2
E 6-UM-55-G
E 10-UM-60-GR
E 10-UM-60-G2
E 10-UM-65-GR
E 10-UM-60-GR
E 10-UM-65-G
E 10-UM-65-GR
E 10-UM-65-GR
E 10-UM-65-G
E 10-UM-60-C
E 10-UM-65-GR
E 10-UM-60-C
E 7-UM-200-KP
E 7-UM-200-KP
E 7-UM-200-KP
/
E 7-UM-200-KP
/
/
/
E 20-UM-55-ZCT
AWS
A-5.13
AWS
A-5.13
/
/
/
/
/
/
/
/
/
E Fe 5-B
/
/
E Fe 5-B
/
/
/
/
/
/
/
/
/
/
/
/
/
/
DIN
8573
G/WSG-20-GO-40-ZCT
A-5.15
/
Page
Page
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
R Co Cr-C
G/WSG-20-GO-55-ZCT
ERCo
E 20-UM-55-ZCT
CoCr-C
Cr-C
EG/WSG-20-GO-55-ZCT
20-UM-40-ZCT
RECo
CoCr-A
Cr-C
G/WSG-20-GO-45-ZCT
E
Co
Cr-A
E 20-UM-40-ZCT
R Co Cr-A
EG/WSG-20-GO-45-ZCT
20-UM-50-ZCT
RECo
CoCr-B
Cr-A
G/WSG-20-GO-50-ZCT
ERCo
E 20-UM-50-ZCT
CoCr-B
Cr-B
EG/WSG-20-GO-50-ZCT
20-UM-300-CKZT
/ E Co Cr-B
G/WSG-20-GO-300-CKZT /
E 20-UM-300-CKZT
/
G/WSG-20-GO-40-ZCT
G/WSG-20-GO-300-CKZT / /
K1
K2
K1
K3
K2
K4
K3
K5
K4
K6
K5
K7
K6
K8
K7
K9
K8
K10
K9
K11
K10
K12
K11
K13
K12
K14
K13
K15
K14
K15
L1
L2
L1
L3
L2
L4
L3
L5
L4
L6
L5
L7
L6
L7
M1
M2
M1
M3
M2
M4
M3
M4
N1
N2
N1
N3
N2
N4
N3
N5
N4
N6
N5
N7
N6
N8
N7
N9
N8
DIN 8573
E NiCu G12
E NiCu BG13
E NiCu G12
E Ni BG12
E NiCu BG13
E Ni BG12
E Ni BG12
E Ni BG13
E Ni BG12
E NiFe BG12
E Ni BG13
E NiFe BG13
E NiFe BG12
E NiFe BG12
PROGRAMME
E NiFe BG13
E NiFe BG13
E NiFe BG12
E Ni BG12
E NiFe BG13
E (FeC-2)
E
Fe-1 S BG
21 49
E Ni BG12
E Fe-1 S 21
A-5.15
E NiCu-B
E NiCu-B
E NiCu-B
E Ni-Cl
E NiCu-B
E Ni-Cl
E Ni-Cl
E Ni-Cl
E Ni-Cl
E NiFe-Cl
E Ni-Cl
E NiFe-Cl
E NiFe-Cl
E NiFe-Cl
E NiFe-Cl
E NiFe-Cl
E NiFe-Cl
E Ni-Cl
E NiFe-Cl
/ St
E
E Ni-Cl
E St
O1
O2
O1
O3
O2
O4
O3
O5
O4
O6
O5
O7
O6
O8
O7
09
O8
O10
09
O11
O12
O10
O11
AWS
Page
N9
I10
I10
PRODUCT
EN
DIN
PRODUCT PROGRAMME
SL 250
E (FeC-2) BG 49
d.o.o.
SL 250
PRODUCT
O12
O12
Page
E CuSn-A
E CuAl-A2
AWS
E CuMnNiAl
A-5.6
ECu
A-5.3
E CuSn-A
E-1100
E CuAl-A2
E-3003
E CuMnNiAl
E-4043
/ ECu
A-5.3
/E-1100
/E-3003
/E-4043
//
A-5.17
/
/ A0EM 12K
F7
/ A0EM 12K
F7
/ A2EM 12K
F7
A-5.17
F6
A2EM 12K
F6 A4EM 12K
F6
F7A4EM
A0EM12K
12K
/F7 A0EM 12K
/F7 A2EM 12K
/F6 A2EM 12K
/F6 A4EM 12K
/F6 A4EM 12K
/
F6
/ A4EM 12K
F7
/ A2EM 12K
A-5.9
/ A-5.28*
/
A-5.18
** /
/
A-5.14 ***
F6 A4EM 12K
F7 70
A2EM
ER
S-A112K
*
A-5.9
A-5.28*
ER
80 /S-G
*
A-5.18
**
/
ER 90S-G
A-5.14S-6
*****
ER70
ER70 S-6 **
ER347
70 S-A1 *
ER
ER308
80 S-G
ER
L Si *
ER
Si
ER318
90S-G
ER
316
L Si**
ER70 S-6
ER
309
L Si**
ER70 S-6
ER
ER347
307
ER
ER310
308 L Si
ER
ER312
318 Si
ER
***
ERNiCr-3
316 L Si
ER 309 L Si
ER 307
ER 310
ER 312
ER NiCr-3 ***
P1
P2
Page
P3
P4
PRODUCT PROGRAMME
EN
/
Electrodes for welding copper and aluminium alloys
BRON CuSn
BRON CuAl
PRODUCT
EN
BRON CuMn
/
EL Cu
ALU 99.5
BRON
ALU
MnCuAl
BRON
CuMn
ALU
5 Si
EL Cu
ALU
12 Si
Electrodes for cutting, gouging and preheating
ALU 99.5 1
SEKATOR
/
ALU Mn 2 A
SEKATOR
/
ALU 5 Si 2 B
SEKATOR
/
ALU 12 Si
TERMO
Electrodes for cutting, gouging and preheating
EN 760
SEKATOR 1 welding fluxes and wires for
/ S.A. welding
Agglomerated
SEKATOR
2A
/ AR 1 88 AC
AR
18.5
SA
SEKATOR
2B
/ AR 1 97 AC
AR
D1
SA
TERMO
AR
18.1
SA AR 1 88 AC
ENAB
7601 76 AC
AB 100
SA
FB
TT
1 55
AC H5
Agglomerated
welding fluxes and wiresSA
forFB
S.A.
welding
FB
SA
AR12.2
18.5
SAFB
AR1165
88AC
ACH5
FB
SA
ARCrNi
D1
SAFB
AR2163
97DC
AC
CS
6
SA
ARCr
18.1
SACS
AR1196
88AC
AC
CS
SA
AB CrNi
100
SACS
AB 21 99
76 AC
AC
AB
SA
FB Cr
TT
SAAB
FB 21 65
55 AC
AC H5
CS
SA
CS 13 65
97 AC
AC H5
FB 350
12.2
SA FB
FB
SA
FB33
CrNi
SAAF
FB2254
63DC
DC
AB
SA
CS123
Cr 6
SAAB
CS1167
96AC
ACH5
MS
SA
CS 200
CrNi
SAMS
CS 12 88
99 AC
AC
EN12072
EN
1668* /
AB Cr
SA AB 2/65
AC
EN
CS 350
SA12070
CS 3**97 AC
FB 33
SA AF 2 54 DC
Welding
AB 123 rods for TIG welding
SA AB 1 67 AC H5
MS
200
SA MS 1 88 AC
TIG Mo
WMoSi/W2Mo*
EN12072
W CrMo1 /SiEN
** 1668* /
TIG CrMo
EN
12070 Si
** **
W CrMo2
TIG 2 CrMo
TIG VAC 60
W 42 5 W 3 Si 1 *
Welding
rods for TIG welding
TIG
VAC 65
W 46 4 W 4 Si 1 *
TIG19/9
Mo NbSi
WMoSi/W2Mo*
TIG
W
19 9 Nb Si
W 19
CrMo1
TIG
9 L SiSi **
TIG19/9
CrMoNC Si
W
TIG
12 3 Si
Nb**Si
W 19
CrMo2
TIG19/12/3
2 CrMo NbSi
W
TIG
19/12/3
NC
Si
W
19
3 L3 Si
TIG VAC 60
W 4212
5W
Si 1 *
TIG
25/14
NC
Si
W
23
12
L
TIG VAC 65
W 46 4 W Si
4 Si 1 *
W
18
8
Mn
TIG
18/8/6
Si
TIG 19/9 NbSi
W 19 9 Nb Si
TIG
W
TIG25/20
19/9 NC Si
W 25
1920
9 L Si
TIG
29/9
W
TIG 19/12/3 NbSi
W 29
19912 3 Nb Si
/W 19 12 3 L Si
TIG
TIG70/15
19/12/3 NC Si
TIG 25/14 NC Si
W 23 12 L Si
W 18 8 Mn
TIG 18/8/6 Si
TIG 25/20
W 25 20
TIG 29/9
W 29 9
/
TIG 70/15
E (FeC-2) BG 49
DIN
DIN 1733 / DIN 8555*
E CuSn-7
E CuAl-8
DIN
E 31-200cn *
DIN 1733 / DIN 8555*
E CuMn2
DIN 1732
E CuSn-7
EL-Al 99.5
E CuAl-8
EL-Al Mn
E 31-200cn
*
EL-Al
Si5
E CuMn2
EL-AlSi
12
DIN 1732
/EL-Al 99.5
/EL-Al Mn
/EL-Al Si5
/EL-AlSi 12
DIN 32 522
/
/
BAR
1 88 AC 10 SKM
/
BAR
1 97 AC 10 SKM
/
BAR
1 88 AC 10 SKM
DIN 32
522
BAB
1 76
AC 10
BFB 1 55 AC10MHP5
BFB
BAR1165
88AC12MHP5
AC 10 SKM
BFB
8K
BAR5163
97745
AC DC
10 SKM
BCS
BAR1196
88AC
AC12
10BSKM
BCS
BAB519976545
ACAC10KMB
10
BAB
AC 10B
BFB516555545
AC10MHP5
BCS
CrMo AC8
BFB 31 97C
65 AC12MHP5
BFB
BFB6554255
63 745DC
DC8K
8K
BAB
BCS1167
96AC
AC10
12 B
DIN
/ DIN
BAB8556
5 65 545
AC8575*
10B
DIN
** CrMo AC8
BCS8559
3 97C
BFB 6 54255 DC 8K
BAB 1 67 AC 10
SG Mo *
DINCrMo
85561/ DIN
SG
* 8575*
DINCrMo
85592***
SG
SG-2 **
SG-3 **
SGX5
MoCrNiNb
*
SG
19 9
SGX2
CrMo
1 19
* 9
SG
CrNi
SG
X5
CrNiMoNb
SG CrMo 2 * 19 12
SG
X2**CrNiMo 19 12
SG-2
SG
X2**CrNi 24 12
SG-3
SG
CrNiMn19
1898
SGX15
X5 CrNiNb
SG
12CrNi
CrNi19
25920
SGXX2
SG
CrNi 30 919 12
SG X10
X5 CrNiMoNb
SG
(DIN1736)
SGNiCr20Nb
X2 CrNiMo
19 12
SG X2 CrNi 24 12
SG X15 CrNiMn 18 8
SG X 12 CrNi 25 20
SG X10 CrNi 30 9
SG NiCr20Nb (DIN1736)
AWS
A-5.6
P1
P5
P2
P6
P3
P7
P4
P8
P5
Q1
P6
Q2
P7
Q3
P8
Q4
Q1
Q2
R1
Q3
R2
Q4
R3
R4
R5
R6
R1
R7
R2
R8
R3
R9
R4
R10
R5
R11
R6
R12
R7
R13
R8
R14
R9
R10
R11
R12
R13
R14
S1
S2
S3
S4
S5
S1
S13
S2
S14
S15
S3
S16
S4
S17
S5
S18
S13
S19
S14
S20
S15
S21
S16
S17
I11
S18
S19
S20
S21
I11I11
PRODUCT PROGRAMME
d.o.o.
TIG 22/9/3 LN
TIG 625
TIG Cu
TIG CuAl8
TIG CuSn6
TIG CuAg
TIG CuMn
TIG CuSi3
W 22 9 3 LN
/
PRODUCT
EN 440
EN
VAC 60 Ni
G 42 4 C/M G 3 Ni1
VAC 60 Ti
G 42 2 C/M G 3Si1+ Ti
G 42 2 C/M G 0
VAC 60 CuNi
MIG Cu
MIG CuAl8
MIG CuSn6
MIG CuAg
MIG CuMn
MIG CuSi3
ER 2209
ERNiCrMo-3
A-5.7
ER CuSn
ER CuAl-A1
ER CuSn-A
/
/
ER CuSi-A
S22
S23
DIN
DIN 8559
AWS
A-5.18/A-5.28*
Page
SG-2
SG-3
/
/
/
ER 70 S-6
ER 70 S-6
ER 80 S-Ni1*
ER 70 S-2
ER 80 S-G*
S4
S5
S6
S7
S8
S24
S25
S26
S27
S28
S29
A-5.9 / A-5.28 *
A-5.14 **
G Mo Si ***
G CrMo1 Si ***
G CrMo2 Si ***
Mn3Ni1Mo
Mn3Ni1CrMo*
89 6 M GMn4Ni2CrMo
G17 ,
X6 Cr17**
G 19 9 Nb
G 19 9 L Si
G 19 12 3 Nb Si
G 19 12 3 L Si
G 23 12 L Si
G 18 8 Mn
G 25 20
G 29 9
/
G 22 9 3 LN
/
/
/
ER 70 S-A1 *
ER 80 S-G *
ER 90S-G *
ER 80 S-Ni 1 *
ER 100 S-1 *
ER 120 S-1 *
ER 430
ER 347 Si
ER 308 L Si
ER 318 Si
ER 316 L Si
ER 309 L Si
ER 307
ER 310
ER 312
ER NiCr-3 **
ER 2209
ERNiCrMo-3 **
S1
S2
S3
S9
S10
S11
S12
S13
S14
S15
S16
S17
S18
S19
S20
S21
S22
S23
DIN 1733
SG-CuSn
SG-CuAl8
SG-CuSn6
SG-CuAg
SG-CuMn13Al7
SG-CuSi3
A-5.7
ER CuSn
ER CuAl-A1
ER CuSn-A
/
/
ER CuSi-A
S24
S25
S26
S27
S28
S29
DIN 8554
A-5.2
GI
G II
G III
G IV
GV
R 45
R 60
R 60
R 65
R 65
EN 12 536
Welding rods for oxyacetilene- welding
VP 37
OI
VP 40
O II
VP 42
O III
VP Mo
O IV
OV
VP CrMo
I12
/
/
DIN 1733
SG-CuSn
SG-CuAl8
SG-CuSn6
SG-CuAg
SG-CuMn13Al7
SG-CuSi3
SG Mo *
SG CrMo 1 *
SG CrMo 2 *
/
/
/
/
SG X5 CrNiNb 19 9
SG X5 CrNi 19 9
SG X5 CrNiMoNb 19 12
SG X2 CrNiMo 19 12
SG X2 CrNi 24 12
SG X 15 CrNiMn 18 8
SG X 12 CrNi 25 20
SG X10 CrNi 30 9
SG NiCr20Nb (DIN1736)
T1
T2
T3
T4
T5
d.o.o.
PRODUCT PROGRAMME
EN 756* / EN 12072
EN 10 088**
Wires and strips for submerged arc welding
EPP 2
S2 *
EPP 2 Mo
S 2 Mo *
EPP 3
S3 *
X 6 Cr 17**
EPP 17 Cr
S 19 9 L
EPP 19/9 NC
S 19 12 3 L
EPP 19/12/3 NC
S 18 8 Mn
EPP 18/8/6
/
INOX TR Cr 17
/
INOX TR 19/9
A-5.17 /A-5.23*
/A-5.9**
S2 *
S 2 Mo *
S3 *
EM 12 K
EA 2 *
EM 13 K
ER 430 **
ER 308 L **
ER 316 L **
ER 307 **
/
/
UP X2 CrNi 19 9
UP X2 CrNiMo 19 12
UP X 15 CrNiMn 18 8
UP X8 Cr 18
UP X2 CrNi 19 9
U1
PRODUCT
PROGRAMME
Non-standard wires and electrodes, available
only on customers
request.
PRODUCT
EN
Flux cored wires for MIG MAG welding
Metalic type
EN 758 / EN 12535 *
DIN
FILTUB 12 M
T 46 4 M M 1 H5
FILTUB 28M
FILTUB 32 M
T 55 61NiMoMM1H5*
T 69 4 Mn 2Ni Cr Mo M M 1 H5 *
FILTUB 38 M
Rutile typ
FILTUB 4 R
FILTUB 5 R
FILTUB 6 R
FILTUB 7 R
FILTUB 8 R
FILTUB 32 R
T 894Mn2NiCrMoMM1H5*
EN 758/EN12071*
T 46 4 PM1 H5/ T 46 4 PC1 HST
T 46 A 1 NiCrCuP M1
T 42 AZ PC1 H5 / T AZ PM1 HST
T 46 4 1Ni PM1
T Mo LPM1 H5 *
T 69 6 ZPM11H5*
Basic typ
FILTUB 12 B
FILTUB 14 B
FILTUB 16 B
FILTUB 18 B
FILTUB 19 B
FILTUB 25 B
FILTUB 28 B
FILTUB 32 B
FILTUB 36 B
FILTUB 38 B
FILTUB 40 B
FILTUB 42 B
EN 758/EN12071*
** EN 12535
T 42 4B C3 H5 / T 42 4B M3 H5
T Mo LBC3 H5 / T Mo LBM3 H5 *
T CrMo1 BC3 H5 / T CrMo1 M3 H5 *
T CrMo2 BC3 H5 / T CrMo2 M3 H5 *
T CrMo2 BC3 H5 / T CrMo2 M3 H5 *
/
T 50 61NiMoBC3 H5 / T 50 61NiMoBM3 H5**
T 69 6 Mn2NiCrMo B M (C)3 H5 **
T 42 6 2Ni B M3 H5
T 89 4 Mn2Ni1CrMo BM3 H5**
T 46 6 ZB C3 H5/ T 46 6 ZB M3 H5
/
DIN 8555
For hardfacing
FILTUB DUR 3
FILTUB DUR 4
FILTUB DUR 5
FILTUB DUR 12
FILTUB DUR 14
FILTUB DUR 15
FILTUB DUR 15.1
FILTUB DUR 16
FILTUB UTOP 38
FILTUB UTOP 55
FILTUB UTOP Co
FILTUB UTOP Mo1
AWS
A-5.18/A-5.19*
A-5.20/A-5.29*
E 70 C-& MH4
E 71 T-1 MH4
E 90 C-K3MH4*
E 110C-K4H4*
E 111T1-K4H4*
E 120C-K4H4*
A-5.29/A-5.20 *
E 71 T-1 *
E 71 T1-G
E 71 T1-G
E 81 T1-Ni 1
E 81 T1-A1
E 111T1K4MJH8*
A-5.29/A-5.20 *
E 70 T-5 M4 *
E 80 T5-G
E 80 T5-B2
E 80 T5-G
E 90 T5-G
E 90 T5-G
E 90 T5-G
E 110 T5-K4
E 90 T5-G
E 120 T5-G
E 80 T5-G
E 110 T5-G
MSG1-GF-M21-250/MSG1-GF-C1-250
MSG1-GF-M21-300/MSG1-GF-C1-300
MSG1-GF-M21-350/MSG1-GF-C1-350-P
MSG5-GF-M21-40-P/MSG5-GF-C1-40-P
MSG6-GF-M21-55-GP/MSG6-GF-L1-55-GP
MSG5 -GF-M21-50-P/MSG5-GF-C1-50-P
MSG5 -GF-M21-50-P/MSG5-GF-C1-50-P
MSG6-GF-M21-60-GP/MSG6-GF-C1-60-GP
MSG5-GF-M21-40-P/MSG5-GF-C1-40-P
MSG6-GF-M21-55-GP/MSG6-GF-C1-55-GP
MSG 6-GF-M21-55-GP/MSG6-GF-C1-55-GP
MSG 5-GF-M21-50-GP/MSG5-GF-C1-50-GP
Page
V1
V2
V3
V4
V5
V6
V7
V8
V9
V10
V11
V12
V13
V14
V15
V16
V17
V18
V19
V20
V21
V22
V23
V24
V25
V26
V27
V28
V29
V30
V31
V32
I13
V33 I13
V34
Basic typ
FILTUB 12 B
FILTUB 14 B
FILTUB 16 B
FILTUB 18 B
FILTUB 19 B
FILTUB 25 B
FILTUB 28 B
FILTUB 32 B
FILTUB 36 B
FILTUB 38 B
FILTUB 40 B
FILTUB 42 B
EN 758/EN12071*
** EN 12535
A-5.29/A-5.20 *
T 42 4B C3 H5 / T 42 4B M3 H5
E 70 T-5 M4 *
T Mo LBC3 H5 / T Mo LBM3 H5 *
E 80 T5-G
T CrMo1 BC3 H5 / T CrMo1 M3 H5 *
E 80 T5-B2
T CrMo2 BC3 H5 / T CrMo2 M3 H5 *
E 80 T5-G
T CrMo2 BC3 H5 / T CrMo2 M3 H5 *
E 90 T5-G
/
E 90 T5-G
T 50 61NiMoBC3 H5 / T 50 61NiMoBM3 H5** E 90 T5-G
T 69 6 Mn2NiCrMo B M (C)3 H5 **
E 110 T5-K4
T 42 6 2Ni B M3 H5
E 90 T5-G
T 89 4 Mn2Ni1CrMo BM3 H5**
E 120 T5-G
d.o.o.
PRODUCT
PROGRAMME
T 46 6 ZB C3 H5/ T 46 6 ZB M3 H5
E 80 T5-G
/
E 110 T5-G
PRODUCT
EN
DIN
AWS
DIN 8555
Flux
cored wires for MIG MAG welding
For hardfacing
Metalic
EN 758 / EN 12535 *
A-5.18/A-5.19*
MSG1-GF-M21-250/MSG1-GF-C1-250
FILTUB type
DUR 3
A-5.20/A-5.29*
MSG1-GF-M21-300/MSG1-GF-C1-300
FILTUB DUR 4
MSG1-GF-M21-350/MSG1-GF-C1-350-P
FILTUB
M5
T 46 4 M M 1 H5
E 70 C-& MH4
FILTUB 12
DUR
E 71 T-1 MH4
MSG5-GF-M21-40-P/MSG5-GF-C1-40-P
FILTUB DUR 12
MSG6-GF-M21-55-GP/MSG6-GF-L1-55-GP
FILTUB
T 55 61NiMoMM1H5*
E 90 C-K3MH4*
FILTUB 28M
DUR 14
MSG5
-GF-M21-50-P/MSG5-GF-C1-50-P
FILTUB 32
DUR
FILTUB
M 15
T 69 4 Mn 2Ni Cr Mo M M 1 H5 *
E 110C-K4H4*
MSG5 -GF-M21-50-P/MSG5-GF-C1-50-P
E 111T1-K4H4*
FILTUB DUR 15.1
MSG6-GF-M21-60-GP/MSG6-GF-C1-60-GP
FILTUB
DUR
16
FILTUB 38 M
T 894Mn2NiCrMoMM1H5*
E 120C-K4H4*
MSG5-GF-M21-40-P/MSG5-GF-C1-40-P
FILTUB
UTOP 38
Rutile
typ
EN 758/EN12071*
A-5.29/A-5.20 *
MSG6-GF-M21-55-GP/MSG6-GF-C1-55-GP
FILTUB
UTOP
55
FILTUB 4 R
T 46 4 PM1 H5/ T 46 4 PC1 HST
E 71 T-1 *
MSG 6-GF-M21-55-GP/MSG6-GF-C1-55-GP
FILTUB
UTOP
Co
FILTUB 5 R
T 46 A 1 NiCrCuP M1
E 71 T1-G
MSG 5-GF-M21-50-GP/MSG5-GF-C1-50-GP
FILTUB UTOP Mo1
FILTUB 6 R
T 42 AZ PC1 H5 / T AZ PM1 HST
E 71 T1-G
Flux
cored
wires
for
S.A.-welding
5.23
FILTUB 7 R
T 46 4 1Ni PM1
EA 81
T1-Ni 1
FILTUB
112
FILTUB 8 R
T Mo LPM1 H5 *
EF781A4-EC-G
T1-A1
FILTUB
114
F7
A4-EC-A4
FILTUB 32 R
T 69 6 ZPM11H5*
E 111T1FILTUB 116
F8 P0-EC-B2
K4MJH8*
FILTUB
118
F8 PO-EC-B3 *
Basic
typ
EN 758/EN12071*
** EN 12535
A-5.29/A-5.20
FILTUB 126
F7 A8-EC-G
FILTUB 12 B
T 42 4B C3 H5 / T 42 4B M3 H5
E 70 T-5 M4 *
FILTUB 128
F9 A8-EC-G
FILTUB 14 B
T Mo LBC3 H5 / T Mo LBM3 H5 *
E 80 T5-G
FILTUB 132
F11 A8-EC-F5
FILTUB 16 B
T CrMo1 BC3 H5 / T CrMo1 M3 H5 *
E 80 T5-B2
FILTUB 136
F7 A15-EC-Ni2
FILTUB 18 B
T CrMo2 BC3 H5 / T CrMo2 M3 H5 *
E 80 T5-G
FILTUB 138
F12 A4-EC-G
FILTUB 19 B
T CrMo2 BC3 H5 / T CrMo2 M3 H5 *
E 90 T5-G
FILTUB 140
F7 A4-EC-G
FILTUB 25 B
/
E 90 T5-G
DIN61NiMoBM3
8555
PRODUCT
FILTUB 28 B
T 50 61NiMoBC3
H5 / TPROGRAMME
50
H5** E 90 T5-G
For hardfacing
FILTUB
32 B
T 69 6 Mn2NiCrMo B M (C)3 H5 **
E 110 T5-K4
FILTUB 36
DUR
UP1-GF-BFB-165-350 E 90 T5-G
FILTUB
B 205
T 42 6 2Ni B M3 H5
FILTUB 38
DUR
652-40 E 120 T5-G
FILTUB
B 212
T 89 4 Mn2Ni1CrMo BM3UP5-GF-BFB4
H5**
FILTUB 40
DUR
FILTUB
B 214
T 46 6 ZB C3 H5/ T 46 6 UP6-BFB4
ZB M3 H5 652 - 50
E 80 T5-G
FILTUB 42
DUR
UP5-GF-BFB4 652-55 E 110 T5-G
FILTUB
B 215
/
FILTUB DUR 12Cr2NiMo
UP5-GF-BFB
165-400
DIN
8555
UP5-GF-BFB 165-40
FILTUB
DUR 13Cr3NiMoV
For
hardfacing
UP5-GF-BCS 256-40
FILTUB DUR
DUR 317 Cr
MSG1-GF-M21-250/MSG1-GF-C1-250
FILTUB
MSG1-GF-M21-300/MSG1-GF-C1-300
For welding
steel
EN 12073
A-5.22
FILTUB
DUR stainless
4
MSG1-GF-M21-350/MSG1-GF-C1-350-P
FILTUB
DUR
E 308L T0-1 / E 308L T0-4
FILCORD
3085 L
MSG5-GF-M21-40-P/MSG5-GF-C1-40-P
FILTUB
DUR
E 308L T1-1 / E 308L T1-4
FILCORD
30812LI
MSG6-GF-M21-55-GP/MSG6-GF-L1-55-GP
FILTUB DUR 14
E 316L T0-1 / E 316L T0-4
FILCORD 316 L
MSG5 -GF-M21-50-P/MSG5-GF-C1-50-P
FILTUB DUR 15
E 316L T1-1 / E 316L T1-4
FILCORD
31615.1
LI
MSG5 -GF-M21-50-P/MSG5-GF-C1-50-P
FILTUB
DUR
E 309L T0-1 / E 309L T0-4
FILCORD
30916L
MSG6-GF-M21-60-GP/MSG6-GF-C1-60-GP
FILTUB
DUR
E 309L T1-1 / E 309L T1-4
MSG5-GF-M21-40-P/MSG5-GF-C1-40-P
FILCORD
309 38
LI
FILTUB
UTOP
MSG6-GF-M21-55-GP/MSG6-GF-C1-55-GP
FILTUB
UTOP
E 307 T0-1 / E 307 T0-4
FILCORD
307 55
MSG
6-GF-M21-55-GP/MSG6-GF-C1-55-GP
FILTUB
UTOP
E 307
T1-1 / E 307 T1-4
FILCORD
307ICo
MSG 5-GF-M21-50-GP/MSG5-GF-C1-50-GP
FILTUB UTOP Mo1
Flux cored wires for S.A.-welding
A 5.23
I14
V11
V12
V13
V14
V15
V16
V17
V18
V19
V20
V21
V22
Page
V23
V24
V1
V25
V26
V2
V27
V28
V3
V29
V30
V4
V31
V32
V5
V33
V6
V34
V7
V8
V35
V9
V36
V10
V37
V38
V39
V11
V40
V12
V41
V13
V42
V14
V43
V15
V44
V16
V17
V18
V45
V19
V46
V20
I13
V47
V21
V48
V22
V49
V50
V51
V23
V24
V25
V52
V26
V52
V27
V53
V28
V53
V29
V54
V30
V54
V31
V32
V55
V33
V55
V34
V35
V36
V37
V38
V39
V40
V41
V42
V43
V44
I13
d.o.o.
PRODUCTION PROGRAM
PRODUCTION PROGRAM
PRODUCT
W. Nr.
Page
Electrodes
PRODUCT
INOX B 13 Fe
Electrodes
INOX B 13/1 Fe
INOX
FeFe
INOX B
B 13
13/4
INOX
B 17
13/1
INOX B
FeFe
INOX
B 13/4
Fe
INOX B
17MoFe
INOX
FeNb
INOX B
R 17
19/9
INOX
17MoFe
INOX B
B 19/9
Nb
INOX
INOX R
R 19/9
19/9 Nb
NC
INOX
Nb Nb
INOX B
R 19/9
19/12/3
INOX
R 19/12/3
19/9 NCNb
INOX B
INOX
INOX R
R 19/12/3
19/12/3 Nb
NC
INOX
B
19/12/3
INOX R 19/13/4 Nb
L
INOX
R
19/12/3
NC
INOX R 22/9/3 LN
INOX
R
19/13/4
INOX R 20/10/3LL
INOX
INOX R
R 22/9/3
20/25 LLN
INOX B
R 20/25
20/10/3L
INOX
L
INOX R
L
INOX
R 20/25
25/4 Fe
INOX R
B 20/25
INOX
25/14 L
NC
INOX
R
25/4
Fe
INOX R 25/14/3 NC
INOX
R
25/14
INOX R 25/20 NC
INOX
25/14/3 NC
INOX R
B 25/20
INOX
25/20
INOX R
B 18/8/6
INOX B
INOX
R 25/20
18/8/6 Fe
INOX R
B 18/8/6
INOX
18/8/6
INOX R
R 29/9
18/8/6 Fe
INOX
INOX
R
INOX R 18/8/6
29/9 Fe
INOX
R
29/9
INOX B 70/15
INOX
R
29/9 Fe
BRON CuSn
INOX
70/15
BRONBCuAl
BRON
BRON CuSn
CuMn
BRON
EL
Cu CuAl
BRON
CuMn
ALU
99.5
EL Cu
ALU 99.5
W. Nr.
Page
~1.4009
~1.4018
~1.4009
~1.4351
~1.4018
~1.4015
~1.4351
1.4115
~1.4015
1.4551
1.4115
1.4551
1.4551
1.4316
1.4551
1.4576
1.4316
1.4576
1.4576
1.4430
1.4576
1.4453
1.4430
1.4462
1.4453
1.4431
1.4462
~1.4539
1.4431
~1.4539
~1.4539
~1.4820
~1.4539
1.4332
~1.4820
1.4459
1.4332
1.4842
1.4459
1.4842
1.4842
1.4370
1.4842
1.4370
1.4370
1.4370
1.4370
1.4337
1.4370
1.4337
1.4337
~2.4620
1.4337
2.1025
~2.4620
~2.0926
2.1025
~2.1368
~2.0926
~2.1363
~2.1368
3.0259
~2.1363
3.0259
G1
G2
G1
G3
G2
G5
G3
G6
G5
H1
G6
H2
H1
H3
H2
H4
H3
H5
H4
H6
H5
H7
H6
H8
H7
H9
H8
H10
H9
H11
H10
I1
H11
I2
I1
I3
I2
I4
I3
I5
I4
J2
I5
J3
J2
J4
J3
J5
J4
J6
J5
J7
J6
P1
J7
P2
P1
P3
P2
P4
P3
P5
P4
P5
PRODUCT
Rods PRODUCT
and wires
ALU Mn
Rods and wires
ALU 5 Si
ALU
ALU Mn
12 Si
ALU
Si Mo
TIG /5MIG
ALU
Si CrMo
TIG /12
MIG
TIG
MIG /Mo
TIG /CrMo
MIG 2 CrMo
TIG
MIG60
CrMo
TIG /VAC
/ VAC 60
TIG
CrMo65
/ MIG
2 CrMo
TIG VAC
/ VAC
65
TIG
VACVAC
60 Ti60 / VAC 60
TIG VAC
MIG
17 65 / VAC 65
VAC
Ti 19/9 NbSi
TIG / 60
MIG
MIG
TIG /17
MIG 19/9 NC Si
TIG
NbSi
TIG // MIG
MIG 19/9
19/12/3
NbSi
TIG
NCNC
Si Si
TIG // MIG
MIG 19/9
19/12/3
TIG // MIG
MIG 25/14
19/12/3
NbSi
TIG
NC
Si
TIG // MIG
MIG 18/8/6
19/12/3SiNC Si
TIG
TIG // MIG
MIG 25/20
25/14 NC Si
TIG
TIG // MIG
MIG 29/9
18/8/6 Si
TIG
TIG
/
MIG
25/20
TIG/MIG 70/15
TIG
/
MIG
29/9 LN
TIG /MIG 22/9/3
TIG/MIG
TIG/MIG 70/15
625
TIG
LN
TIG /MIG
/ MIG22/9/3
Cu
TIG/MIG
TIG
/ MIG625
CuAl 8
TIG // MIG
MIG CuSn
Cu
TIG
6
TIG // MIG
MIG CuAl
TIG
CuAg8
TIG
/
MIG
CuSn
TIG / MIG CuMn 6
TIG
TIG // MIG
MIG CuAg
CuSi 3
TIG
/ MIG CuMn
VP 37
TIG
/
MIG
CuSi 3
VP 40
VP
VP 37
42
VP Mo
40
VP
VP CrMo
42
VP
VP Mo
VP CrMo
W. Nr.
Page
W. Nr.
Page
3.0516
~3.2245
3.0516
~3.2585
~3.2245
1.5424
~3.2585
1.7339
1.5424
1.7384
1.7339
1.5125
1.7384
1.5130
1.5125
1.5125
1.5130
1.4502
1.5125
1.4551
1.4502
1.4316
1.4551
1.4576
1.4316
1.4430
1.4576
1.4332
1.4430
1.4370
1.4332
1.4842
1.4370
1.4337
1.4842
2.4806
1.4337
1.4462
2.4806
1.4831
1.4462
2.1006
1.4831
2.0921
2.1006
2.1022
2.0921
2.1211
2.1022
2.1367
2.1211
2.1461
2.1367
~1.1116
2.1461
1.0495
~1.1116
~1.6215
1.0495
1.5425
~1.6215
~1.7346
1.5425
~1.7346
P6
P7
P6
P8
P7
S1
P8
S2
S1
S3
S2
S4
S3
S5
S4
S7
S5
S12
S7
S13
S12
S14
S13
S15
S14
S16
S15
S17
S16
S18
S17
S19
S18
S20
S19
S21
S20
S22
S21
S23
S22
S24
S23
S25
S24
S26
S25
S27
S26
S28
S27
S29
S28
T1
S29
T2
T1
T3
T2
T4
T3
T5
T4
T5
I15
I15
I15
ALPHABETICAL LIST
d.o.o.
Welding electrodes
ABRADUR 54
ABRADUR 58
ABRADUR 60
ABRADUR 64
ABRADUR 65
ABRADUR 66
ALU 12Si
ALU 5 Si
ALU 99.5
ALU Mn
BRON CuAl
BRON CuMn
BRON CuSn
CAST Fe
CAST Ni
CAST Ni C
CAST NiFe
CAST NiFe C
CAST NiFe 10
CAST NiFe B
CAST NiFe B C
CELEX
CELEX Mn
CELEX Mo
CELEX Ni
CELEX NiMo
CrWC 600
DUROSTEL 1 E
DUROSTEL 1 P
DUROSTEL 12 E
DUROSTEL 12 P
DUROSTEL 21 E
DUROSTEL 21 P
DUROSTEL 6 E
DUROSTEL 6 P
DUROSTEL F P
E DUR 250
E DUR 300
E DUR 400
E DUR 500
E DUR 600
E DUR 600 Si
E DUR Cr13
E DUR 60 R
E Mn 14
E Mn 14 CR 4
E Mn 17 Cr 10 Nb 3
E Mn 17 Cr 13
EL Cu
E Ti 2 CrMo
E Ti 5 CrMo
E Ti CrMo
E Ti Mo
E Ti MoV
EMONA
EVB 100
II1
OF WELDING CONSUMABLES
Page
L1
L2
L3
L4
L5
L6
P8
P7
P5
P6
P2
P3
P1
O11
O4
O5
O6
O7
O10
O8
O9
A3
A4
A5
A6
A7
L7
N1
N2
N5
N6
N7
N8
N3
N4
N9
K7
K8
K9
K10
K11
K13
K15
K12
M1
M2
M4
M3
P4
F4
F5
F3
F1
F2
A12
D14
Welding electrodes
EVB 100 EKSTRA
EVB 2 CrMo
EVB 2.5 Ni
EVB 2.5 NiMo
EVB 3 CrMoV
EVB 45
EVB 47
EVB 5 CrMo
EVB 50
EVB 55
EVB 60
EVB 62
EVB 65
EVB 75
EVB 80
EVB 9 CrMo
EVB 9 CrMoV
EVB 91 CrMoV
EVB 911 W
EVB CrMo
EVB CrMoV
EVB CrNiMo
EVB CuNi
EVB CuNiCr
EVB EXTRA
EVB K
EVB Mo
EVB Mo1Cr
EVB MoV
EVB Ni
EVB NiMo
EVB P24
EVB S
EVB SP2
GALEB 50
GALEB 70
INOX B 13 Fe
INOX B 13/1 Fe
INOX B 13/4 Fe
INOX B 13/6 Fe
INOX B 17 Fe
INOX B 17 MoFe
INOX B 18/8/6
INOX B 19/9 Nb
INOX B 25/20
INOX B 70/15
INOX R 18/8/6
INOX R 18/8/6 Fe
INOX R 19/12/3 Nb
INOX B 19/12/3 Nb
INOX R 19/12/3 NC
INOX R 19/13/4 L
INOX R 19/9 Nb
INOX R 19/9 NC
INOX R 20/10/3 L
INOX R 20/25 L
Page
D15
E4
D8
D9
E9
C4
C5
E6
C1
C2
D1
D10
D2
D11
D13
E7
E10
E11
E12
E3
E8
D12
D4
D5
C3
C8
E1
E13
E2
D3
D6
E5
C6
D16
C7
D7
G1
G2
G3
G4
G5
G6
J2
H2
I5
J7
J4
J3
H4
H5
H6
H7
H1
H3
H9
H10
ALPHABETICAL LIST
d.o.o.
Welding electrodes
INOX R 22/12/3 Fe
INOX R 22/9/3 LN
INOX R 25/14 NC
INOX R 25/14/3 NC
INOX R 25/4 Fe
INOX R 25/20
INOX R 29/9
INOX R 29/9 Fe
JADRAN S
MONEL
MONEL C
NEUTRAL
RAPID
RUTILEN 1000 S
RUTILEN 12
RUTILEN 13
RUTILEN 13 M
RUTILEN 2000 S
RUTILEN E
RUTILEN K
RUTILEN S
RUTILEN X
AB 100
AB Cr
AR 18.1
AR 18.5
AR D1
CS 350
CS Cr 6
Welding fluxes
OF WELDING CONSUMABLES
Page
J1
H8
I2
I3
I1
I4
J5
J6
A8
O1
O2
A1
A2
A11
A9
A13
A17
A15
A19
A16
A18
A14
Welding electrodes
RUTILEN Z
SAVA 130
SAVA 150
SAVA 150 AR
SAVA 150 B
SAVA 180
SAVA 200
SAVA GV 130
SAVA GV 160
SEKATOR 1
SEKATOR 2 A
SEKATOR 2 B
SL 250
SUPER Ni
TOOLDUR
TOOLDUR Co
TERMO
UTOP 38
UTOP 43
UTOP 45
UTOP 52
UTOP 55
Page
R4
R10
R3
R1
R2
R11
R8
CS CrNi
FB 12.2
FB CrNi
FB TT
FB 33
AB 123
MS 200
Page
U1
U1
U1
U1
U1
U1
U1
U1
U1
S12
S18
S15
S16
S13
S14
S3
S22
S17
S19
S20
S21
S 23
S9
Welding fluxes
Page
A10
B1
B2
B8
B7
B3
B4
B5
B6
Q1
Q2
Q3
O12
O3
K6
K14
Q4
K1
K2
K3
K4
K5
Page
R9
R6
R7
R5
R12
R13
R14
Page
S10
S2
S1
S24
S27
S29
S26
S25
S28
S18
S14
S15
S12
S13
S3
S22
S16
S19
S20
S21
S23
S2
S1
II2
ALPHABETICAL LIST
d.o.o.
OF WELDING CONSUMABLES
Page
S24
S27
S29
S26
S25
S4
S5
S4
S8
Page
S6
S7
S5
T1
T2
T3
T5
T4
Page
V52
V53
V54
V55
V35
V36
V37
V38
V11
V1
V39
V40
V41
V42
V43
V12
V44
V13
V14
V15
V16
V17
V2
V18
V3
V10
V19
V20
Page
V4
V5
V21
V22
V6
V7
V8
V9
V26
V49
V50
V27
V28
V29
V30
V51
V45
V46
V47
V48
V23
V24
V25
V31
V32
V33
V34
II3
Notes:
d.o.o.
WELDING CONSUMABLES
III
NEUTRAL . A1
RAPID.. A2
CELEX . A3
CELEX Mn A4
CELEX Mo A5
CELEX Ni .. A6
CELEX NiMo . A7
JADRAN S . A8
RUTILEN 12 . A9
RUTILEN Z .. A10
RUTILEN 1000 S . A11
EMONA A12
RUTILEN 13 A13
RUTILEN X ... A14
RUTILEN 2000 S . A15
RUTILEN K . A16
RUTILEN 13 M A17
RUTILEN S .. A18
RUTILEN E A19
Classification:
d.o.o.
EN 499:
DIN 1913:
AWS A-5.1:
EN ISO 2560-A:
EN ISO 2560-B:
NEUTRAL
E 35 A A 13
E 43 10 A 2
E 35 AA 13
E 43 40 A
Extra low alloyed electrode for welding armco steel as for steels with extremely low carbon, silicon and
manganese content. Also suitable for light gauge sheet-metal work and for welding zinc coating kettle.
Base materials:
Unalloyed steels:
Thin sheets:
DIN:
St 33 to St 42.3
1623/1
W.Nr.:
1.0035 to 1.0136, 1.1013
Coating type:
Welding current:
Chemical composition, wt %:
C
Si
0.06
0.08
Acid (oxydising)
AC
DC -/+
Welding positions:
Mn
0.40
Mechanical properties:
Redrying temperature:
140C / 1 h
ReL / Rp 0.2:
> 355
Tensile strength
Rm:
440 570
MPa (N/mm )
Elongation
A5:
> 22
Impact energy
KV:
> 55
J ( +20C)
mm
Approvals:
2.5
3.25
4
5
6
REF. E 001 - A / SP
Yield strength
Welding parameters
Length
Current
mm
A
300
350
350/450
450
450
80 110
120 140
150 180
200 240
240 280
Weight/
packet
kg
4
4.4
4.4/5.4
5.4
5.4
MPa (N/mm )
2
Packing
Weight/
carton
kg
20
22
22/27
27
27
Weight/
1000 pcs
kg *
15,6
31,6
87
approximate data
Date:2013-08-06
A1
Classification:
EN 499:
DIN 1913:
AWS A-5.1:
EN ISO 2560-A:
EN ISO 2560-B:
E 38 2 RA 13
E 43 33 AR 7
E 6020
E 38 2 RA 13
E 43 20 A
RAPID
d.o.o.
Thick coated rutile-acid type electrode for welding with increased efficiency of steels with tensile strength
up to 510 N/mm2. High current-carrying capability and good slag detachability even in fillets and narrow
angles.
Base materials:
Unalloyed steels:
Boiler plates:
Pipe steels:
Shipbilding plates:
Steel castings:
DIN:
St 33 to St 52.3
HI, HII, 17 Mn 4
St 35 to St 45.8
A, B, D, E
GS-38, GS-45
W.Nr.:
1.0035 to 1.0570
1.0345, 1.0425
1.0308 to 1.0405
1.0440, 1.0472, 1.0475, 1.0476
1.0416, 1.0443
Coating type:
Welding current:
Chemical composition, wt %:
C
Si
0.06
0.20
Acid-rutile
AC
DC -
Welding positions:
Mn
0.60
Mechanical properties:
Redrying temperature:
140C / 1 h
ReL / Rp 0.2:
> 380
MPa (N/mm )
Tensile strength
Rm:
470 - 600
MPa (N/mm )
Elongation
A5:
> 24
Impact energy
KV:
> 47
J ( - 20C)
mm
Approvals:
2.5
3.25
4
5
6
REF. E 060 - A / M
Yield strength
Welding parameters
Length
Current
mm
A
300/350
350
450
450
450
70 90
90 160
130 220
180 300
250 - 340
Weight/
packet
kg
Packing
Weight/
carton
kg
Weight/
1000 pcs
kg *
4/4.4
4.4
5.4
5.4
5.4
20/22
22
27
27
27
17.4/
34.4
66.7
103.8
150
approximate data
Date: 2011-12-23
A2
Classification:
EN 499:
DIN 1913:
AWS A-5.1:
EN ISO 2560-A:
EN ISO 2560-B:
d.o.o.
E 38 2 C 21
E 43 53 C 4
E 6010
E 38 2 C 21
E 43 10 A
CELEX
Cellulose coated all positional welding electrode for welding pipelines, cisterns and different containers.
It is suitable for vertical down root pass welding on DC negative polarity and for subsequent passes on DC
positive polarity.
Base materials:
API Spec. 5L: Grade A, B, X42, X46, X52, X56, as the root pass up to API grade X 80
DIN 17172:
Grade StE 210.7, StE 240.7.StE 290.7 (TM), StE 320.7 (TM), StE 360.7 (TM), as well as the
root pass up to StE 550.7 (TM)
DIN 17100:
St 37-3, St 52-3
DIN 17155:
St 35.8, St 45.8
H I, H II
Coating type:
Welding current:
DC +
DC (for root beads)
Chemical composition, wt %:
C
Si
0.14
0.2
Welding positions:
Mechanical properties:
Cellulosic
Redrying temperature:
Not permitted
Mn
0.8
Yield strength
ReL / Rp 0.2:
> 390
MPa (N/mm )
Tensile strength
Rm:
Elongation
A5:
> 22
Impact energy
KV:
> 70
> 47
J (+20C)
J (-20C)
mm
Approvals:
2.5
3.25
4
5
TV
REF. E 153 - A / M
Welding parameters
Length
Current
mm
A
300
350
350
350
50 65
90 120
110 140
140 200
Weight/
Packet
kg
4
4.5
5
6.6
Packing
Weight/
carton
kg
16
18
20
26,4
Weight/
1000 pcs
kg *
13.2
25.6
40.0
80.5
approximate data
Date:2011-12-18
A3
Classification:
d.o.o.
EN 499:
DIN 1913:
AWS A-5.5:
EN ISO 2560-A:
EN ISO 2560-B:
CELEX Mn
E 42 2 C 21
E 51 53 C 4
E 7010-G
E 42 2 C 21
E 49 10 A
Cellulose coated all positional welding electrode for vertical down pipe welding. Especially recommended for
hot passes, filler and cover layers.
Base materials:
API Spec. 5L: Grade X42, X46, X52, X56, X60 and the root pass up to API grade X 70
DIN 17172:
Grade StE 290.7 (TM), StE 320.7 (TM), StE 360.7 (TM), StE 385.7 (TM), StE 415.7 (TM)
as well as the root pass up to StE 480.7 (TM)
DIN 17100:
St 37-3, St 52-3
DIN 17155:
St 35.8, St 45.8
Coating type:
Welding current:
DC +
DC (for root beads)
Chemical composition, wt %:
C
Si
0.15
0.2
Welding positions:
Mechanical properties:
Cellulosic
Redrying temperature:
Not permitted
Mn
1.3
Yield strength
ReL / Rp 0.2:
Tensile strength
Rm:
Elongation
A5:
> 20
Impact energy
KV:
> 70
> 47
%
J (+20C)
J (-20 C)
mm
Approvals:
2.5
3.25
4
5
TV
REF. E 155 - A / SP
Welding parameters
Length
Current
mm
A
300
350
350
350
50 65
90 120
110 140
140 200
Weight/
Packet
kg
4
5
5
6.6
Packing
Weight/
carton
kg
16
20
20
26,4
Weight/
1000 pcs
kg *
13.4
26.5
40.0
80.5
approximate data
Date:2005-07-07
A4
Classification:
EN 499:
AWS A-5.5:
EN ISO 2560-A:
EN ISO 2560-B:
d.o.o.
E 42 3MoC 21
E 7010-A1
E 42 3 MoC 21
E 49 10 A
CELEX Mo
Cellulose coated electrode for vertical down welding hot and filler passes and for caping of higher strength
pipe steels.
Base materials:
API Spec. 5L: Grade X42, X46, X52, X56, X60 and the root pass up to API grade X 80
DIN 17172:
Grade StE 290.7 (TM), StE 320.7 (TM), StE 360.7 (TM), StE 385.7 (TM), StE 415.7 (TM)
as well as the root pass up to StE 550.7 (TM)
DIN 17100:
St 37-3, St 52-3
DIN 17155:
St 35.8, St 45.8
St-WstE 255-355
Coating type:
Welding current:
DC +
DC (for root beads)
Chemical composition, wt %:
C
Si
0.12
0.2
Welding positions:
Mechanical properties:
Cellulosic
Redrying temperature:
Not permitted
Mn
0.9
Mo
0.5
ReL / Rp 0.2:
Tensile strength
Rm:
Elongation
A5:
> 20
Impact energy
KV:
> 70
> 47
J (+20C)
J (-30C)
mm
Approvals:
2.5
3.25
4
5
REF. E 154 - A / MS
Yield strength
Welding parameters
Length
Current
mm
A
300
350
350
350
50 65
90 120
110 140
140 200
Weight/
Packet
kg
4
4.5
5
6.6
Packing
Weight/
carton
kg
16
18
20
26.4
Weight/
1000 pcs
kg *
13.4
26.5
40.0
80.5
approximate data
Date:2012-12-23
A5
Classification:
EN 499:
AWS A-5.5:
EN ISO 2560-A:
EN ISO 2560-B:
d.o.o.
E 46 3 1 NiC 21
E 8010-G
E 46 3 1 NiC 21
E 55 10-N1 A
CELEX Ni
Cellulose coated electrode for vertical down pipe welding higher strength pipe steels. Especially recommended
for hot passes, filler and cover layers.
Base materials:
API Spec. 5L: Grade X56, X60, X65, X70.
DIN 17172:
Grade StE 385.7 (TM), StE 415.7 (TM), StE 455.7 (TM)
as well as the root pass up to StE 550.7 (TM)
Coating type:
Welding current:
DC +
DC (for root beads)
Chemical composition, wt %:
C
Si
0.14
0.2
Welding positions:
Mechanical properties:
Cellulosic
Redrying temperature:
Not permitted
Mn
0.7
Ni
0.6
Yield strength
ReL / Rp 0.2:
Tensile strength
Rm:
Elongation
A5:
> 20
Impact energy
KV:
> 70
> 47
J (+20C)
J (-30C)
mm
Approvals:
2.5
3.25
4
5
REF. E 156 - A / SP
Welding parameters
Length
Current
mm
A
300
350
350
350
50 65
90 120
110 140
140 200
Weight/
Packet
kg
4
5
5
6.6
Packing
Weight/
carton
kg
16
20
20
26.4
Weight/
1000 pcs
kg *
13.4
26.5
40.0
80.5
approximate data
Date:2005-07-07
A6
Classification:
EN 499:
AWS A-5.5:
EN ISO 2560-A:
EN ISO 2560-B:
d.o.o.
E 50 3 1NiMo C 21
E 9010-G
E 50 3 1NiMo C 21
E 49 10 A
CELEX Ni Mo
Cellulose coated electrode for vertical down pipe welding high yield and tensile strength pipe steels.
Especially recommended for hot passes, filler and cover layers.
Base materials:
API Spec. 5L: Grade X65, X70, X80.
DIN 17172:
Grade StE 455.7 (TM), StE 480.7 (TM)
Coating type:
Welding current:
DC +
DC (for root beads)
Chemical composition, wt %:
C
Si
Mn
0.12
0.2
0.8
Welding positions:
Mechanical properties:
Cellulosic
Redrying temperature:
Not permitted
Ni
0.7
Yield strength
ReL / Rp 0.2:
Tensile strength
Rm:
Elongation
A5:
> 18
Impact energy
KV:
> 70
> 47
J (+20C)
J (-30C)
mm
Approvals:
2.5
3.25
4
5
REF. E 157 - A / SP
Mo
0.4
Welding parameters
Length
Current
mm
A
300
350
350
350
50 65
90 120
110 140
140 200
Weight/
Packet
kg
4
5
5
6.6
Packing
Weight/
carton
kg
16
20
20
26.4
Weight/
1000 pcs
kg *
13.4
26.5
40.0
80.5
approximate data
Date:2005-07-07
A7
Classification:
d.o.o.
JADRAN S
EN 499:
DIN 1913:
AWS A-5.1:
EN ISO 2560-A:
EN ISO 2560-B:
E 35 0 RC 11
E 43 11 R(C) 3
E 6013
E 35 0 RC 11
E 43 13 A
Multi-purpose electrode, easy to use, for welding light and medium fabrications of steels with tensile strength
up to 510 N/mm2. Suitable also for vertical-down welding.
Base materials:
Unalloyed steels:
Boiler plates:
Pipe steels:
Shipbilding plates:
Steel castings:
Thin sheets:
DIN:
St 33 to St 52.3
HI, HII
St 35 to St 35.8
St 45 to St 45.8
St.E 210.7 to St.E 360.7
A, B, D
GS-38, GS-45
1623/1
W.Nr.:
1.0035 to 1.0570
1.0345, 1.0425
1.0308 to 1.0305
1.0408 to 1.0405
1.0307 to 1.0582
1.0440, 1.0472, 1.0475
1.0416, 1.0443
Coating type:
Welding current:
Chemical composition, wt %:
C
Si
0.06
0.20
Rutile
AC
DC -
Welding positions:
Mn
0.35
Mechanical properties:
Redrying temperature:
140C / 1 h
ReL / Rp 0.2:
> 360
MPa (N/mm )
Tensile strength
Rm:
470 - 550
MPa (N/mm )
Elongation
A5:
> 22
Impact energy
KV:
> 47
mm
Approvals:
2
2.5
3.25
4
5
6
REF. E 123 - A / SP
Yield strength
Welding parameters
Length
Current
mm
A
300
300
350
350
450
450
50 60
65 80
110 135
140 170
180 210
250 - 300
Weight/
packet
kg
4
4
5
5
6.6
6.6
J ( 0C)
Packing
Weight/
carton
kg
20
20
25
25
33
33
Weight/
1000 pcs
kg *
10.5
14.7
29
43
86.8
124.5
approximate data
Date:2004-06-28
A8
Classification:
EN 499:
DIN 1913:
AWS A-5.1:
EN ISO 2560-A:
EN ISO 2560-B:
d.o.o.
E 38 0 RC 11
E 43 22 R(C) 3
E 6012
E 38 0 RC 11
E 43 12 A
RUTILEN 12
Celulosic-rutile type electrode used in maintenance and for repairing purposes of mild steel. In smaller
dimensions can be used also for vertical-down welding.
Base materials:
Unalloyed steels:
Boiler plates:
Pipe steels:
Shipbilding plates:
Steel castings:
Thin sheets:
DIN:
St 33 to St 52.3
HI, HII, 17 Mn4
St 35 to St 52.4
StE 210.7 to StE 360.7
A, B, D
GS-38 to GS-52
1623/1
W.Nr.:
1.0035 to 1.0570
1.0345, 1.0425, 1.0481
1.0308 to 1.0581
1.0307 to 1.0582
1.0440, 1.0472, 1.0475
1.0416 to 1.0551
Coating type:
Welding current:
Chemical composition, wt %:
C
Si
0.06
0.30
Cellulosic-rutile
AC
DC -
Welding positions:
Mn
0.40
Mechanical properties:
ReL / Rp 0.2:
> 380
Tensile strength
Rm:
470 - 600
Elongation
A5:
> 22
Impact energy
KV:
> 47
J (0C)
Yield strength
Redrying temperature:
120C / 1 h
MPa (N/mm2)
mm
Approvals:
CR:
BV:
LR:
DNV:
ABS:
S
TV
DB
1.6
2
2.5
3.25
4
5
6
1
1
1
2
1
REF. E 131 - A / SM
Welding parameters
Length
Current
mm
A
250
300
300/350
350
350
450
450
30 50
50 60
55 85
90 140
130 180
180 230
250 - 320
Weight/
packet
kg
3.4
4
4/4.4
5
4.4
6
6
MPa (N/mm2)
Packing
Weight/
carton
kg
17
20/22
20
22
30
30
30
Weight/
1000 pcs
kg *
5.2
9.5
14.9/17.6
29
44.9
92
127.7
approximate data
Date:2013-08-06
A9
Classification:
EN 499:
DIN 1913:
AWS A-5.1:
EN ISO 2560-A:
EN ISO 2560-B:
d.o.o.
E 42 0 RC11
E 51 22 RR(C) 6
E 6013
E 42 0 RC 11
E 49 13 A
RUTILEN Z
Thick coated rutile-cellulose type electrode for welding low alloyed steels. Suitable for welding constructions, in
maintenance and for repairing purposes.
Base materials:
Unalloyed steels:
Boiler plates:
Pipe steels:
Shipbilding plates:
Steel castings:
Thin sheets:
DIN:
St 33 to St 52.3
HI, HII, 17 Mn4
St 35 to St 52.4
StE 210.7 to StE 360.7
A, B, D
GS-38 to GS-52
1623/1
W.Nr.:
1.0035 to 1.0570
1.0345, 1.0425, 1.0481
1.0308 to 1.0581
1.0307 to 1.0582
1.0440, 1.0472, 1.0475
1.0416 to 1.0551
Coating type:
Welding current:
Chemical composition, wt %:
C
Si
0.08
0.40
Cellulosic-rutile
AC
DC - / +
Welding positions:
Mn
0.60
Mechanical properties:
Yield strength
Redrying temperature:
140C / 1 h
Rp 0.2 %:
> 420
MPa (N/mm )
2
Tensile strength
Rm:
Elongation
A5:
> 22
Impact energy
KV :
> 47
%
J (0C)
mm
Approvals:
TV
DB
2
2.5
3.25
4
5
REF. E 145 - A / SM
Welding parameters
Length
Current
mm
A
300
350
350
350
450
30 50
55 85
90 135
130 170
175 220
Weight/
packet
kg
4
4.4
4
4
5.4
Packing
Weight/
carton
kg
20
22
20
20
27
Weight/
1000 pcs
kg *
10.8
20
33.9
51.9
approximate data
Date: 2013-08-06
A10
Classification:
EN 499:
DIN 1913:
AWS A-5.1:
EN ISO 2560-A:
EN ISO 2560-B:
d.o.o.
RUTILEN 1000 S
E 42 0 RC11
E 51 32 RR(C) 5
E 6013
E 42 0 RC 11
E 49 13 A
Thick coated rutile-cellulose type electrode for welding low alloyed steels. Suitable for welding constructions, in
maintenance and for repairing purposes.
Base materials:
Unalloyed steels:
Boiler plates:
Pipe steels:
Shipbilding plates:
Steel castings:
Thin sheets:
DIN:
St 33 to St 52.3
HI, HII, 17 Mn4
St 35 to St 52.4
StE 210.7 to StE 360.7
A, B, D
GS-38 to GS-52
1623/1
W.Nr.:
1.0035 to 1.0570
1.0345, 1.0425, 1.0481
1.0308 to 1.0581
1.0307 to 1.0582
1.0440, 1.0472, 1.0475
1.0416 to 1.0551
Coating type:
Welding current:
Chemical composition, wt %:
C
Si
0.08
0.45
Cellulosic-rutile
AC
DC - / +
Welding positions:
Mn
0.65
Mechanical properties:
Redrying temperature:
140C / 1 h
ReL / Rp 0.2:
> 420
Tensile strength
Rm:
Elongation
A5:
> 22
Impact energy
KV:
> 47
J (0C)
mm
1.6
2
2.5
3.25
4
5
TV
DB
GL 2Y
REF. E 146 - A / SM
Welding parameters
Length
Current
mm
A
250
300
350
350
350
450
MPa (N/mm )
2
Yield strength
40 55
55 65
60 85
90 135
130 170
175 220
Weight/
packet
kg
3.4
4
4.4
4.4
4.4
5.4
Packing
Weight/
carton
kg
17
20
22
22
22
27
Weight/
1000 pcs
kg *
5.5
10.3
19
32
48.3
approximate data
Date: 2012-12-23
A11
Classification:
d.o.o.
GOST 9467-60:
EN 499:
DIN 1913:
AWS A-5.1:
EN ISO 2560-A:
EN ISO 2560-B:
EMONA
E 46-T
E 38 2 RB 12
E 43 43 RR(B)7
E 6013
E 38 2 RB 12
E 43 03 A
Thick basic-rutile coated electrode for welding low alloyed steels with tensile strength up to 510 N/mm2. The
weld metal deposit has high mechanical properties and can be used for a wide range of materials.
Base materials:
Unalloyed steels:
Boiler plates:
Pipe steels:
Shipbilding plates:
Steel castings:
Finegrained steels
DIN:
St 33 to St 52.3
HI, HIII, 17Mn4
St 35 to St 52.4
StE 210.7 to StE 360.7
A, B, D, E
GS-38 to GS-52
StE 255 to StE 355
W.Nr.:
1.0035 to 1.0570
1.0345, 1.0435, 1.0481
1.0308 to 1.0581
1.0307 to 1.0582
1.0440 to 1.0476
1.0416 to 1.0551
1.0461 to 1.0562
Coating type:
Welding current:
Chemical composition, wt %:
C
Si
0.10
0.20
Basic-rutile
AC
DC -
Welding positions:
Mn
0.55
Mechanical properties:
Redrying temperature:
140C / 1 h
ReL / Rp 0.2:
> 380
MPa (N/mm )
Tensile strength
Rm:
470 - 600
MPa (N/mm )
Elongation
A5:
> 24
Impact energy
KV:
> 47
mm
Approvals:
CR:
ABS:
BV:
GL:
LR:
DNV:
TV
S
3
3
3
3
3
3
2
2.5
3.25
4
5
6
REF. E 050 - A / SM
Yield strength
Welding parameters
Length
Current
mm
A
300
300/350
350
450
450
450
55 70
70 90
115 145
145 190
200 250
250 - 290
Weight/
packet
kg
4
4/4.4
4.4
5.4
5.4
5.4
J (-20C)
Packing
Weight/
carton
kg
20
20/22
22
27
27
27
Weight/
1000 pcs
kg *
11
17.1/19.5
32.8
62.5
98.4
142.9
approximate data
Date:2013-08-06
A12
Classification:
d.o.o.
EN 499:
DIN 1913:
AWS A-5.1:
EN ISO 2560-A:
EN ISO 2560-B:
RUTILEN 13
E 42 0 RR 12
E 51 22 RR 6
E 6013
E 42 0 RR 12
E 49 12 A
Thick rutile coated electrode for welding low alloyed steels. It has excellent welding characteristic, easy to use.
Base materials:
Unalloyed steels:
Boiler plates:
Pipe steels:
Shipbilding plates:
Steel castings:
Thin sheets:
DIN:
St 33 to St 52.3
HI, HII, 17 Mn4
St 35 to St 52.4
StE 210.7 to StE 360.7
A, B, D
GS-38 to GS-52
1623/1
W.Nr.:
1.0035 to 1.0570
1.0345, 1.0425, 1.0481
1.0308 to 1.0581
1.0307 to 1.0582
1.0440, 1.0472, 1.0475
1.0416 to 1.0551
Coating type:
Welding current:
Chemical composition, wt %:
C
Si
0.08
0.35
Rutile
AC
DC-
Welding positions:
Mn
0.50
Mechanical properties:
Redrying temperature:
140C / 2 h
ReL / Rp 0.2:
> 420
Tensile strength
Rm:
500 640
MPa (N/mm )
Elongation
A5:
> 22
Impact energy
KV:
> 47
J (0C)
mm
Approvals:
CR:
ABS:
BV:
GL:
LR:
DNV:
S
TV
DB
1.6
2
2.5
3.25
4
5
6
2
2
2
2
2
2
REF. E 115 - A / SM
Yield strength
Welding parameters
Length
Current
mm
A
250
300
300/350
350/450
450
450
450
30 50
50 70
65 90
100 140
140 180
190 240
240 - 290
Weight/
packet
kg
3.4
4
4/4.4
5
5.4
5.4
5.4
MPa (N/mm )
2
Packing
Weight/
carton
kg
17
20
20/22
25
27
27
27
Weight/
1000 pcs
kg *
6.1
11.1
17.6/20.5
34.5
67.5
105.9
150
approximate data
Date:2013-08-06
A13
Classification:
EN 499:
DIN 1913:
AWS A-5.1:
EN ISO 2560-A:
EN ISO 2560-B:
d.o.o.
E 42 0 RR 12
E 51 22 RR 6
E 6013
E 42 0 RR 12
E 49 13 A
RUTILEN X
Thick rutile coated electrode for welding low alloyed steels up to 510 N/mm2. It has excellent welding
characteristic.
Base materials:
Unalloyed steels:
Boiler plates:
Pipe steels:
Shipbilding plates:
Steel castings:
Thin sheets:
DIN:
St 33 to St 52.3
HI, HII, 17 Mn4
St 35 to St 52.4
StE 210.7 to StE 360.7
A, B, D
GS-38 to GS-52
1623/1
W.Nr.:
1.0035 to 1.0570
1.0345, 1.0425, 1.0481
1.0308 to 1.0581
1.0307 to 1.0582
1.0440, 1.0472, 1.0475
1.0416 to 1.0551
Coating type:
Welding current:
Chemical composition, wt %:
C
Si
0.09
0.50
Rutile
AC
DC - / +
Welding positions:
Mn
0.70
Mechanical properties:
Redrying temperature:
140C / 1 h
ReL / Rp 0.2:
> 420
MPa (N/mm )
Tensile strength
Rm:
510 610
MPa (N/mm )
Elongation
A5:
> 22
Impact energy
KV :
> 47
mm
Approvals:
TV
DB
2
2.5
3.25
4
5
REF. E 104 - A / SM
Yield strength
Welding parameters
Length
Current
mm
A
300
350
350
350/450
450
50 70
55 85
90 135
130 170
175 220
J (0C)
Weight/
packet
kg
Packing
Weight/
carton
kg
4
4.4
4.4
4/5.4
5.4
20
22
22
25/27
27
Weight/
1000 pcs
kg *
11.7
21.5
36
52.6/
approximate data
Date:2011-12-23
A14
Classification:
EN 499:
DIN 1913:
AWS A-5.1:
EN ISO 2560-A:
EN ISO 2560-B:
d.o.o.
E 42 0 RR 12
E 51 22 RR 6
E 6013
E 42 0 RR 12
E 49 13 A
RUTILEN 2000 S
Thick rutile coated electrode for welding low alloyed steels up to 510 N/mm2. It has excellent welding
characteristic.
Base materials:
Unalloyed steels:
Boiler plates:
Pipe steels:
Shipbilding plates:
Steel castings:
Thin sheets:
DIN:
St 33 to St 52.3
HI, HII, 17 Mn4
St 35 to St 52.4
StE 210.7 to StE 360.7
A, B, D
GS-38 to GS-52
1623/1
W.Nr.:
1.0035 to 1.0570
1.0345, 1.0425, 1.0481
1.0308 to 1.0581
1.0307 to 1.0582
1.0440, 1.0472, 1.0475
1.0416 to 1.0551
Coating type:
Welding current:
Chemical composition, wt %:
C
Si
0.08
0.50
Rutile
AC
DC - / +
Welding positions:
Mn
0.70
Mechanical properties:
Redrying temperature:
140C / 1 h
ReL / Rp 0.2:
> 420
MPa (N/mm )
Tensile strength
Rm:
510 610
MPa (N/mm )
Elongation
A5:
> 22
Impact energy
KV:
> 47
J (0C)
mm
Approvals:
1.6
2
2.5
3.25
4
5
TV
DB
REF. E 103 - A / SM
Yield strength
Welding parameters
Length
Current
mm
A
250
300
350
350
450
450
30 - 50
50 70
55 85
90 135
130 170
175 220
Weight/
packet
kg
3.4
4
4,4
4,4
4.4/5.4
5.4
Packing
Weight/
carton
kg
17
20
22
22
27
27
Weight/
1000 pcs
kg *
11.3
21
36
53.0/67.5
103.8
approximate data
Date:2013-08-06
A15
Classification:
EN 499:
DIN 1913:
AWS A-5.1:
EN ISO 2560-A:
EN ISO 2560-B:
d.o.o.
E 38 2 R 12
E 43 33 R 3
E 6013
E 38 2 R 12
E 43 13 A
RUTILEN K
Medium coated rutile electrode suitable for shipbuilding and structural steels as well as general purpose
fabrications in mild and medium carbon steels. It is specially designed for horizontal, vertical and overhead
welding. The coating of electrode is of higher basicity than most other rutile types and provides weld deposits
of high metallurgical quality. Used for steels with higher carbon equivalent than normally considered suitable
for E 6013 type electrodes.
Base materials:
Unalloyed steels:
Boiler plates:
Pipe steels:
Shipbilding plates:
Fine-grain structural
steels:
DIN:
St 33 to St 52.3
HI, HII, 17 Mn4
St 35 to St 52.4
StE 210.7 to StE 360.7
A, B, D, E
W.Nr.:
1.0035 to 1.0570
1.0345, 1.0425, 1.0481
1.0308 to 1.0581
1.0307 to 1.0582
1.0440, 1.0472, 1.0475, 1.0476
1.0461 to 1.0562
Coating type:
Welding current:
Chemical composition, wt %:
C
Si
0.08
0.20
Rutile
AC
DC+/DC for root passes
Welding positions:
Mn
0.50
Mechanical properties:
Redrying temperature:
150C / 2 h
Metal recovery:
Yield strength
ReL / Rp 0.2:
> 380
MPa (N/mm )
Tensile strength
Rm:
470 550
MPa (N/mm )
Elongation
A5:
> 22
Impact energy
KV :
> 47
J (-20C)
cca. 95 %
mm
Approvals:
Welding parameters
Length
Current
mm
A
Weight/
packet
kg
Packing
Weight/
carton
kg
4/4.4
4.4
5.4
5.4
5.4
20/22
22
27
27
27
Weight/
1000 pcs
kg *
/
2.5
3.25
4
5
6
*
REF. E 055 - A / SM
300/350
350
450
450
450
70 100
90 120
130 180
160 240
240 - 290
approximate data
Date:2011-12-23
A16
Classification:
EN 499:
DIN 1913:
AWS A-5.1:
EN ISO 2560-A:
EN ISO 2560-B:
d.o.o.
E 38 0 R 12
E 43 21 R 3
E 6013
E 38 A R 12
E 43 12 A
RUTILEN 13 M
Rutile type, medium coated electrode, specially suitable for thin sheet welding. It has good striking and
restriking, little spatter loss, smooth bead appearance.
Base materials:
Unalloyed steels:
Boiler plates:
Pipe steels:
Shipbilding plates:
Steel castings:
Thin sheets:
DIN:
St 33 to St 52.3
HI, HII
St 35 to St 52.4
A, B
GS-38, GS-45
1623/1
W.Nr.:
1.0035 to 1.0570
1.0345, 1.0425
1.0308 to 1.0581
1.0440, 1.0472
1.0416 to 1.0443
Coating type:
Welding current:
Chemical composition, wt %:
C
Si
0.08
0.40
Rutile
AC
DC-
Welding positions:
Mn
0.50
Mechanical properties:
Redrying temperature:
140C / 2 h
ReL / Rp 0.2:
> 380
MPa (N/mm )
Tensile strength
Rm:
470 - 600
MPa (N/mm )
Elongation
A5:
> 22
Impact energy
KV:
> 60
J ( 0C)
mm
Approvals:
/
2
2.5
3.25
4
5
REF. E 110 - A / M
Yield strength
Welding parameters
Length
Current
mm
A
300
300 / 350
350
350
450
50 70
60 90
90 140
120 180
160 230
Weight/
packet
kg
4
4/5
5
5
6
Packing
Weight/
carton
kg
20
20 / 25
25
25
30
Weight/
1000 pcs
kg *
10.5
16.7/19.2
32.2
50
92.3
approximate data
Date:2011-11-23
A17
Classification:
EN 499:
DIN 1913:
AWS A-5.1:
EN ISO 2560-A:
EN ISO 2560-B:
d.o.o.
E 38 0 RC 11
E 43 22 R(C) 3
E 6013
E 38 0 RC 11
E 43 13 A
RUTILEN S
Rutile cellulosic universal electrode used in maintenance and for repairing purposes in shipbuilding and repair.
Base materials:
Unalloyed steels:
Boiler plates:
Pipe steels:
Shipbuilding plates:
Steel castings:
Thin sheets:
DIN:
St 33 to St 52.3
HI, HII, 17 Mn4
St 35 to St 52.4
StE 210.7 to StE 360.7
A, B, D
GS-38 to GS-52
1623/1
W.Nr.:
1.0035 to 1.0570
1.0345, 1.0425, 1.0481
1.0308 to 1.0581
1.0307 to 1.0582
1.0440, 1.0472, 1.0475
1.0416 to 1.0551
Coating type:
Welding current:
Chemical composition, wt %:
C
Si
0.08
0.40
Cellulosic-rutile
AC
DC -/+
Welding positions:
Mn
0.60
Mechanical properties:
Yield strength
Redrying temperature:
120C / 1 h
ReL / Rp 0.2:
> 380
Tensile strength
Rm:
470 - 600
MPa (N/mm2)
Elongation
A5:
> 22
Impact energy
KV:
> 47
J (0C)
mm
Approvals:
1.6
2
2.5
3.25
4
5
6
REF. E 139 - A / SM
MPa (N/mm2)
Welding parameters
Length
Current
mm
A
250
300
300/350
350
350
450
450
30 50
50 60
55 85
90 140
130 180
180 230
250 - 320
Weight/
packet
kg
3.6
4
4/4.4
4.4
4.4
6
6
Packing
Weight/
carton
kg
18
20
20/22
22
22
30
30
Weight/
1000 pcs
kg *
9.5
14.9/
34.4
44.9
89.6
127.7
approximate data
Date:2011-12-23
A18
Classification:
EN 499:
DIN 1913:
AWS A-5.1:
EN ISO 2560-A:
EN ISO 2560-B:
d.o.o.
E 42 0 RC11
E 51 32 R(C) 3
E 6013
E 42 0 RC 11
E 49 13 A
RUTILEN E
Thin coated rutile- cellulosic electrode for welding low alloyed steels. Rutilen E is easy operating all position
electrode including vertical down. Suitable for welding constructions, in maintenance and repair purposes.
Base materials:
Unalloyed steels:
Boiler plates:
Pipe steels:
Shipbilding plates:
Steel castings:
Thin sheets:
DIN:
St 33 to St 52.3
HI, HII, 17 Mn4
St 35 to St 52.4
StE 210.7 to StE 360.7
A, B, D
GS-38 to GS-52
1623/1
W.Nr.:
1.0035 to 1.0570
1.0345, 1.0425, 1.0481
1.0308 to 1.0581
1.0307 to 1.0582
1.0440, 1.0472, 1.0475
1.0416 to 1.0551
Coating type:
Welding current:
Chemical composition, wt %:
C
Si
0.07
0.40
Cellulosic-rutile
AC
DC - / +
Welding positions:
Mechanical properties:
Redrying temperature:
140C / 1 h
ReL / Rp 0.2:
> 420
MPa (N/mm )
Tensile strength
Rm:
510 610
MPa (N/mm )
Elongation
A5:
> 22
Impact energy
KV:
> 47
J (0C)
mm
Approvals:
TV
DB
2.5
3.25
4
Yield strength
REF. E142 SI / M
Mn
0.6
Welding parameters
Length
Current
mm
A
300
350
350
55 85
90 140
130 180
Weight/
packet
kg
4
5
4.4
Packing
Weight/
carton
kg
20
22
30
Weight/
1000 pcs
kg *
14.9
34.4
44.9
approximate data
Date: 4.9.2013
A19
d.o.o.
SAVA 130 . B1
SAVA 150 ... B2
SAVA 180 ... B3
SAVA 200 B4
SAVA GV 130 . B5
SAVA GV 160 . B6
SAVA 150 B B7
SAVA 150 AR . B8
Classification:
EN 499:
DIN 1913:
AWS A-5.1:
EN ISO 2560-A:
EN ISO 2560-B:
d.o.o.
E 38 0 RR 33
E 43 32 RR 11 130
E 7024
E 38 0 RR 33
E 43 24 A
SAVA 130
High efficiency, rutile electrode with approximately 130 % metal recovery. Suitable for welding low alloyed
steels with tensile strength up to 510 MPa.
Base materials:
Unalloyed steels:
Boiler plates:
Finegrained steels:
Shipbilding plates:
Steel castings:
DIN:
St 33 to St 52.3
HI, HII,17Mn4
StE 255 to StE 355
A, B, D
GS-38 to GS-52
W.Nr.:
1.0035 to 1.0570
1.0345, 1.0425, 1.0481
1.0461 to 1.0562
1.0440, 1.0472, 1.0475
1.0416 to 1.0551
Coating type:
Welding current:
Chemical composition, wt %:
C
Si
0.08
0.20
Rutile
AC
DC -
Mn
0.50
Mechanical properties:
Welding positions:
ReL / Rp 0.2:
Yield strength
Redrying temperature:
250C / 1 h
> 390
MPa(N/mm )
2
Tensile strength
Rm:
Elongation
A5:
> 22
Impact energy
KV :
> 47
J ( 0C)
Weight/
Packet
kg
Packing
Weight/
carton
kg
Metal recovery:
cca.130 %
2
2.5
3.25
4
5
REF. E 190 - A / M
Welding parameters
Length
Current
mm
A
mm
300
300
350
450
450
50 65
70 100
120 160
160 200
220 260
20
Weight/
1000 pcs
kg *
45.5
approximate data
Date: 2013-08-13
B1
Classification:
d.o.o.
SAVA 150
EN 499:
DIN 1913:
AWS A-5.1:
EN ISO 2560-A:
EN ISO 2560-B:
E 38 0 RR 53
E 43 32 RR 11 150
E 7024
E 38 0 RR 53
E 43 24 A
High efficiency, rutile electrode with approximately 150 % metal recovery. Suitable for welding low alloyed
steels with tensile strength up to 510 MPa.
Base materials:
Unalloyed steels:
Boiler plates:
Finegrained steels:
Shipbilding plates:
Steel castings:
DIN:
St 33 to St 52.3
HI, HII,17Mn4
StE 255 to StE 355
A, B, D
GS-38 to GS-52
W.Nr.:
1.0035 to 1.0570
1.0345, 1.0425, 1.0481
1.0461 to 1.0562
1.0440, 1.0472, 1.0475
1.0416 to 1.0551
Coating type:
Welding current:
Chemical composition, wt %:
C
Si
0.08
0.20
Rutile
AC
DC -
Mn
0.55
Mechanical properties:
Welding positions:
Redrying temperature:
250C / 1 h
Yield strength
ReL / Rp 0.2:
> 390
MPa(N/mm )
Tensile strength
Rm:
Elongation
A5:
> 22
Impact energy
KV :
> 47
J ( 0C)
Metal recovery:
cca.150 %
2
2.5
3.25
4
5
TV
REF. E 170 - A / M
Welding parameters
Length
Current
mm
A
mm
300
300
350
450
450
50 65
70 100
120 160
160 200
220 260
Weight/
Packet
kg
3,8
3,8
4
5.2
5
Packing
Weight/
carton
kg
19
19
20
26
25
Weight/
1000 pcs
kg *
15
22,5
49,4
94,5
157,6
approximate data
Date: 2013-08-13
B2
Classification:
EN 499:
DIN 1913:
AWS A-5.1:
EN ISO 2560-A:
EN ISO 2560-B:
d.o.o.
E 42 0 RR 74
E 43 32 RR 11 180
E 7024
E 42 0 RR 74
E 49 24 A
SAVA 180
High efficiency, rutile electrode with approximately 180 % metal recovery for high productivity welding heavy
fabrications in ordinary structural steels with tensile strength up to 510 MPa.
Base materials:
Unalloyed steels:
Boiler plates:
Finegrained steels:
Shipbilding plates:
Steel castings:
DIN:
St 33 to St 52.3
HI, HII,17Mn4
StE 255 to StE 355
A, B, D
GS-38 to GS-52
W.Nr.:
1.0035 to 1.0570
1.0345, 1.0425, 1.0481
1.0461 to 1.0562
1.0440, 1.0472, 1.0475
1.0416 to 1.0551
Coating type:
Welding current:
Chemical composition, wt %:
C
Si
0.08
0.40
Rutile
AC
DC -
Mn
0.80
Mechanical properties:
Welding positions:
Yield strength
Redrying temperature:
250C / 1 h
ReL / Rp 0.2:
> 430
MPa(N/mm )
2
Tensile strength
Rm:
Elongation
A5:
> 22
Impact energy
KV :
> 47
J ( 0C)
Weight/
Packet
kg
Packing
Weight/
carton
kg
/4.4
5/5.4
5.4
5.4
/22
25/27
27
27
Metal recovery:
cca. 180 %
2
2.5
3.25
4
5
REF. E 176 - A / SM
Welding parameters
Length
Current
mm
A
mm
300
300/350
350/450
450
450
50 65
70 100
120 160
160 200
220 260
Weight/
1000 pcs
kg *
110.2
approximate data
Date: 2013-08-13
B3
Classification:
d.o.o.
SAVA 200
EN 499:
DIN 1913:
AWS A-5.1:
EN ISO 2560-A:
EN ISO 2560-B:
E 42 0 RR 74
E 43 32 RR 11 200
E 7024
E 42 0 RR 74
E 49 24 A
High efficiency, rutile electrode with approximately 200 % metal recovery for high productivity welding heavy
fabrications in ordinary structural steels, with tensile strength up to 510 MPa.
Base materials:
Unalloyed steels:
Boiler plates:
Finegrained steels:
Shipbilding plates:
Steel castings:
DIN:
St 33 to St 52.3
HI, HII,17Mn4
StE 255 to StE 355
A, B, D
GS-38 to GS-52
W.Nr.:
1.0035 to 1.0570
1.0345, 1.0425, 1.0481
1.0461 to 1.0562
1.0440, 1.0472, 1.0475
1.0416 to 1.0551
Coating type:
Welding current:
Chemical composition, wt %:
C
Si
0.08
0.30
Rutile
AC
DC -
Mn
0.75
Mechanical properties:
Welding positions:
Redrying temperature:
250C / 1 h
Yield strength
ReL / Rp 0.2:
> 430
MPa(N/mm )
Tensile strength
Rm:
Elongation
A5:
> 22
Impact energy
KV :
> 47
J ( 0C)
Weight/
Packet
kg
Packing
Weight/
carton
kg
Metal recovery:
cca. 200 %
Welding parameters
Length
Current
mm
A
mm
Weight/
1000 pcs
kg *
2Y
3.25
4
5
6
REF. E 180 - A / SM
450
450
450
450
130 180
180 220
240 290
300 370
5
5.2
5.2
5.2
25
26
26
26
72.5
113
157.6
260
approximate data
Date: 2013-08-13
B4
Classification:
d.o.o.
SAVA GV 130
EN 499:
DIN 1913:
AWS A-5.1:
EN ISO 2560-A:
EN ISO 2560-B:
E 38 0 RR 34
E 43 32 RR 11 130
E 7024
E 38 0 RR 34
E 43 24 A
High efficiency, rutile electrode with approximately 125 % metal recovery, designed for gravity welding but
and fillet welds. Suitable for welding steels with tensile strength up to 510 MPa.
Base materials:
Unalloyed steels:
Boiler plates:
Finegrained steels:
Shipbilding plates:
Steel castings:
DIN:
St 33 to St 52.3
HI, HII,17Mn4
StE 255 to StE 355
A, B, D
GS-38 to GS-52
W.Nr.:
1.0035 to 1.0570
1.0345, 1.0425, 1.0481
1.0461 to 1.0562
1.0440, 1.0472, 1.0475
1.0416 to 1.0551
Coating type:
Welding current:
Chemical composition, wt %:
C
Si
0.06
0.30
Rutile
AC
DC -
Mn
0.55
Mechanical properties:
Welding positions:
Redrying temperature:
250C / 1 h
Yield strength
ReL / Rp 0.2:
> 390
MPa(N/mm )
Tensile strength
Rm:
Elongation
A5:
> 22
Impact energy
KV :
> 47
J ( 0C)
Weight/
Packet
kg
Packing
Weight/
carton
kg
Metal recovery:
cca.130 %
mm
Approvals:
5
6
REF. E 190GV - A / SM
Welding parameters
Length
Current
mm
A
700
700
210 250
250 300
10
10
20
20
Weight/
1000 pcs
kg *
200
285.7
approximate data
Date: 2013-08-13
B5
Classification:
EN 499:
DIN 1913:
AWS A-5.1:
EN ISO 2560-A:
EN ISO 2560-B:
d.o.o.
E 38 0 RR 54
E 43 32 RR 11 160
E 7024
E 38 0 RR 54
E 43 24 A
SAVA GV 160
High efficiency, rutile electrode with approximately 160 % metal recovery, designed for gravity welding long but
and fillet welds. Suitable for welding steels with tensile strength up to 510 MPa.
Base materials:
Unalloyed steels:
Boiler plates:
Finegrained steels:
Shipbilding plates:
Steel castings:
DIN:
St 33 to St 52.3
HI, HII,17Mn4
StE 255 to StE 355
A, B, D
GS-38 to GS-52
W.Nr.:
1.0035 to 1.0570
1.0345, 1.0425, 1.0481
1.0461 to 1.0562
1.0440, 1.0472, 1.0475
1.0416 to 1.0551
Coating type:
Welding current:
Chemical composition, wt %:
C
Si
0.08
0.40
Rutile
AC
DC -
Mn
0.75
Mechanical properties:
Welding positions:
Redrying temperature:
250C / 1 h
Yield strength
ReL / Rp 0.2:
> 390
MPa(N/mm )
Tensile strength
Rm:
Elongation
A5:
> 22
Impact energy
KV :
> 47
J ( 0C)
Weight/
Packet
kg
Packing
Weight/
carton
kg
Metal recovery:
cca.160 %
mm
Approvals:
Welding parameters
Length
Current
mm
A
Weight/
1000 pcs
kg *
/
5
6
REF. E 195 - A / M
700
700
260 320
300 360
10
10
20
20
238.1
357.1
approximate data
Date: 2013-08-13
B6
Classification:
d.o.o.
SAVA 150 B
EN 499:
E 42 2 B 53
DIN 1913:
E 51 43 B 12 150
AWS A-5.1:
E 7028
EN ISO 2560-A: E 42 2 B 53
EN ISO 2560-B: E 49 28 A
High efficiency, basic electrode with approximately 155 % metal recovery. It is suitable for high productivity
welding steels with tensile strength up to 610 MPa and finegrained steels with yield strength up to 380 MPa.
Base materials:
Unalloyed steels:
Boiler plates:
Finegrained steels:
Shipbilding plates:
Steel castings:
DIN:
St 33 to St 70.2
HI, HII,17Mn4, 19Mn5
StE 255 to StE 355
A, B, D, E
GS-38, GS-45, GS-52
W.Nr.:
1.0035 to 1.0070
1.0345, 1.0425, 1.0481, 1.0482
1.0461 to 1.0562
1.0440, 1.0472, 1.0475, 1.0476
1.0416, 1.0443, 1.0551
Coating type:
Welding current:
Chemical composition, wt %:
C
Si
0.08
0.50
Basic
AC
DC +
Mn
1.0
Mechanical properties:
Welding positions:
Redrying temperature:
400C / 1 h
Yield strength
ReL / Rp 0.2:
> 420
MPa(N/mm )
Tensile strength
Rm:
Elongation
A5:
> 24
Impact energy
KV :
> 47
J (-20C)
Metal recovery:
cca. 150 %
2.5
3.25
4
5
6
REF. E 240 - A / SP
Welding parameters
Length
Current
mm
A
mm
300
350
450
450
450
50 100
110 160
160 210
200 280
260 - 350
Weight/
Packet
kg
5.4
5.4
5.4
Packing
Weight/
carton
kg
Weight/
1000 pcs
kg *
27
27
27
approximate data
Date: 2013-08-13
B7
Classification:
EN 499:
DIN 1913:
AWS A-5.1:
EN ISO 2560-A:
EN ISO 2560-B:
d.o.o.
E42 4 RA 53
E 51 53 AR 11 160
E 7027
E 42 4 RA 53
E 49 27 A
SAVA 150 AR
High-recovery rutile-acid electrode for horizontal and horizontal-vertical fillets, lap and butt joins in mild steels.
Electrode runs with a very fast smooth stable arc, leaving a finely rippled bead surface with
self- detaching porous slag and minimum spatter. Electrode is also suitable for primer-treated materials.
Base materials:
Unalloyed steels:
Boiler plates:
High tensile steels:
Shipbuilding plates:
Steel castings:
DIN:
St 33 do St 52.3
HI, HII,17Mn4
StE255 StE355
WStE 255 WStE 355
A, B, D, E, AH 32 EH36
GS-38, GS-52
W.Nr.:
1.0035 to 1.0561
1.0345, 1.0425
1.0440, 1.0472, 1.0475
1.0416
Coating type:
Welding current:
Chemical composition, wt %:
C
Si
0.07
0.30
Rutile-acid
AC
DC - / +
Mn
1,0
Mechanical properties:
Welding positions:
ReL / Rp 0.2:
Yield strength
Redrying temperature:
100-110C / 1 h
> 420
MPa(N/mm )
2
Tensile strength
Rm:
Elongation
A5:
> 22
Impact energy
KV :
> 85
> 75
> 47
J ( +20C)
J ( -20 C)
J ( -40 C)
Metal recovery:
cca. 150 %
3Y
3Y
3Y
3Y
3Y
3Y
2
2.5
3.25
4
5
6
REF. E 173 - A / M
Welding parameters
Length
Current
mm
A
mm
300
350
450
450
450
450
50 65
70 100
120 160
160 220
220 320
300 - 400
Weight/
Packet
kg
3.8
3.8
5.2
5.0
5.0
5.1
Packing
Weight/
carton
kg
19
19
26
25
25
25.7
Weight/
1000 pcs
kg *
65
94
147
205
approximate data
Date:2004-06-28
B8
Notes:
d.o.o.
EVB 50 .. C1
EVB 55 ... C2
EVB EXTRA .. C3
EVB 45 .. C4
EVB 47 .. C5
EVB S . C6
GALEB 50 . C7
EVB K C8
Classification:
d.o.o.
EN 499:
DIN 1913:
AWS A-5.1:
EN ISO 2560-A:
EN ISO 2560-B:
EVB 50
E 42 4 B 32 H 5
E 51 55 B 10
E 7018- 1H4R
E 42 4 B 32 H5
E 49 18 A
Basic, CTOD tested electrode with excellent welding characteristics, recommended for welding structural steels and
steel castings with tensile strength up to 610 N/mm2 and finegrained steels with increased yield strength.
Metal recovery is about 118 %. Deposits have very low hydrogen contents (HD < 4 ml/100 g).
Base materials:
Unalloyed steel
Fine grained steel
Boiler plate
Pipe steel
Shipbulding plate
Cast iron
SIST EN
S185 - E335
S235N - S355N
P255NH - P355NH
S420ML
P235GH, P265GH
P295GH, P355GH
P235G1TH - P355T2
L210 - L360GA
L240NB - L415NB
S235JRS2-S235J4S
S310G1S S355G2S
GE200 GE260
DIN
St 33 - St 60.2
St E 255 - St E 355
W St E 255 - W St E 355
TStE 420 TM
H I, H II,
17Mn4, 19Mn5
St 35 - St 52.4
St E 210.7
StE290.7 StE415.7
GL-A, do GL-E
GL-A32 do GL-D36
GS-38 do GS-52
W.Nr.
1.0035, 1.0060
1.0461, 1.0545
1.0462, 1.0565
1.8836
1.0345, 1.0425
1.0481, 1.0473
1.0308, 1.0581
1.0307, 1.0499
1.0484, 1.8972
1.0441, 1.0476
1.0513, 1.0585
1.0420, 1.0552
Coating type:
Welding current:
Chemical composition, wt %:
C
Si
0.07
0.60
Welding positions:
Mechanical properties:
As welded
Basic
DC +
AC (OCV>70 V)
Yield strength
Redrying temperature:
400C / 1 h
Mn
1.0
Elongation
> 24%
> 24%
A5:
Impact energy KV :
mm
Approvals:
CR: 4YHH
ABS: 4YHH
BV: 4YHH
GL: 4YH10
LR: 3/3YH
DNV: 4YH10
RS: 3YHH
S
TV
DB
RINA: 4YHH
PRS: 4YH10
REF. E 202 - A / SM
2
2.5
3.25
4
5
6
8
stress relieved
o
600 C/ 2h
>440 MPa
Welding parameters
Length
Current
mm
A
300
300/350
350/450
450
450
450
450
50 70
65 90
110 140
140 180
180 230
240 290
350 450
Weight/
Packet
kg
3.4
3.4/4
4/5.4
5.4
5.4
5.4
5.4
Packing
Weight/
carton
kg
17
17/20
20/27
27
27
27
27
Weight/
1000 pcs
kg *
12.5
19.8/23.4
36.4/49.5
67
106
150
275
approximate data
Date:2013-08-07
C1
Classification:
d.o.o.
EN 499 :
DIN 8529 :
AWS/ASME 5.1:
EN ISO 2560-A:
EN ISO 2560-B:
EVB 55
E 42 6B 42 H5
EY 42 76 MnB
E 7018-1
E 42 6B 42 H5
E 49 18-P1 A
Basic , CTOD-tested electrode, particularly suitable for welding high strength low-alloy steels. Electrode has
excellent welding properties, it has good slag removal and minimum spatter. The weld metal is very resistant
to hot cracking, has good low temperature impact strength and low hydrogen content.
Base materials:
Unalloyed steel
Fine grained steel
Boiler plate
Pipe steel
Shipbulding plate
Cast iron
SIST EN
S185 - E360
S235N - S355N
P255NH - P355NH
S420ML
P235GH, P265GH
P295GH, P355GH
P235G1TH - P355T2
L240NB - L415NB
S235JRS2-S235J4S
S310G1S S355G2S
GE200 GE260
2
Do 685 Mpa (N/mm )
DIN
St 33 - St 70.2
St E 255 - St E 355
W St E 255 - W St E 355
TStE 420 TM
H I, H II,
17Mn4, 19Mn5
St 35 - St 52.4
StE290.7 StE415.7
GL-A, do GL-E
GL-A32 do GL-D36
GS-38 do GS-52
W.Nr.
1.0035, 1.0070
1.0461, 1.0545
1.0462, 1.0565
1.8836
1.0345, 1.0425
1.0481, 1.0473
1.0308, 1.0581
1.0484, 1.8972
1.0441, 1.0476
1.0513, 1.0585
1.0420, 1.0552
Coating type:
Welding current:
Chemical composition, wt %:
C
Si
0.06
0.40
Basic
DC +
AC (OCV > 70V)
Mechanical properties:
Welding positions:
Yield strength
Redrying temperature:
as welded
stress relieved
580C/15h
2
Elongation
> 25
A5:
> 25
> 47 J(-60C)
typ. 100 J
mm
Approvals:
2.0
2.5
3.25
4.0
5.0
6.0
DB
REF. E 225 - A / SM
ReL / Rp 0.2: > 420 MPa (N/mm ) > 420 MPa (N/mm )
Impact energy KV :
300 - 350C/ 2 h
or
400C/1h
Mn
1.60
Welding parameters
Length
Current
mm
A
300
300/350
350
450
450
450
50 70
65 95
90 140
140 185
180 240
250 330
Weight/
packet
kg
3.4
4.7/4
4.4
5.4
5.4
5.6
Packing
Weight/
carton
kg
17
23.5/25
22
27.0
27.2
28.3
Weight/
1000 pcs
kg *
19/
35
68
109
161
approximate data
Date:2013-08-07
C2
Classification:
d.o.o.
EVB EXTRA
EN 499:
DIN 8529:
AWS A-5.1:
EN ISO 2560-A:
EN ISO 2560-B:
E 42 6 B 12 H10
EY 42 53 MnB
E 7016
E 42 6 B 12 H10
E 4916-P1 A
Double- coated basic electrode with excellent welding properties in difficult positions and in welding root-runs.
It has stable welding arc at DC+ and AC current.
Base materials:
Unalloyed steel
Fine grained steel
Boiler plate
Pipe steel
Shipbulding plate
Cast iron
Rail steel
SIST EN
S185 - E360
S235N - S355N
P255NH - P355NH
S420ML
P235GH, P265GH
P295GH, P355GH
P235G1TH - P355T2
L240NB - L415NB
S235JRS2-S235J4S
S310G1S S355G2S
GE200 GE260
2
Do 685 Mpa (N/mm )
DIN
St 33 - St 70.2
St E 255 - St E 355
W St E 255 - W St E 355
TStE 420 TM
H I, H II,
17Mn4, 19Mn5
St 35 - St 52.4
StE290.7 StE415.7
GL-A, do GL-E
GL-A32 do GL-D36
GS-38 do GS-52
W.Nr.
1.0035, 1.0070
1.0461, 1.0545
1.0462, 1.0565
1.8836
1.0345, 1.0425
1.0481, 1.0473
1.0308, 1.0581
1.0484, 1.8972
1.0441, 1.0476
1.0513, 1.0585
1.0420, 1.0552
Coating type:
Welding current:
Chemical composition, wt %:
C
Si
0.08
0.5
Basic
AC
DC +
Mn
1.50
Mechanical properties:
Welding positions:
Redrying temperature:
300C / 2 h
Yield strength
ReL / Rp 0.2:
> 420
MPa (N/mm )
Tensile strength
Rm:
500-640
MPa (N/mm )
Elongation
A5:
> 22
Impact energy
KV :
> 47
J (-60C)
mm
TV
DB
2.5
3.25
4
5
6
*
REF. E 227 - A / SM
Welding parameters
Length
Current
mm
A
300
350
450
450
450
65 90
110 140
140 180
180 230
240 290
Weight/
Packet
Kg
3.4
4
5.4
5.4
5.4
Packing
Weight/
carton
kg
17
20
27
27
27
Weight/
1000 pcs
kg *
19.8
36.4
66.7
101.9
150
approximate data
Date:2010-08-30
C3
Classification:
d.o.o.
EN 499:
DIN 1913:
AWS A-5.1:
EN ISO 2560-A:
EN ISO 2560-B:
EVB 45
E 42 2 B 32 H5
E 51 43 B(R)9
E 7016
E 42 2 B 32 H5
E 49 18-P1 A
Basic electrode for welding particularly in vertical down positions of root runs with or without backing plates.
Base materials:
Unalloyed steel:
Fine grained steel
Boiler plate
Pipe steel
Shipbulding plate
Cast iron
SIST EN
S185 - E335
S235N - S355N
P255NH - P355NH
S420ML
P235GH, P265GH
P295GH, P355GH
P235G1TH - P355T2
L210 - L360GA
L240NB - L415NB
S235JRS2-S235J4S
S310G1S S355G2S
GE200 GE260
DIN
St 33 - St 60.2
St E 255 - St E 355
W St E 255 - W St E 355
TStE 420 TM
H I, H II,
17Mn4, 19Mn5
St 35 - St 52.4
St E 210.7
StE290.7 StE415.7
GL-A, do GL-E
GL-A32 do GL-D36
GS-38 do GS-52
W.Nr.
1.0035, 1.0060
1.0461, 1.0545
1.0462, 1.0565
1.8836
1.0345, 1.0425
1.0481, 1.0473
1.0308, 1.0581
1.0307, 1.0499
1.0484, 1.8972
1.0441, 1.0476
1.0513, 1.0585
1.0420, 1.0552
Coating type:
Welding current:
Chemical composition, wt %:
C
Si
0.07
0.60
Basic
DC +
AC (OCV>70V)
Mn
0.90
Mechanical properties:
Welding positions:
Redrying temperature:
400C / 1 h
Yield strength
ReL / Rp 0.2:
> 420
MPa (N/mm )
Tensile strength
Rm:
500 640
MPa (N/mm )
Elongation
A5:
> 20
Impact energy
KV :
> 47
J (-20C)
mm
Approvals:
2
2.5
3.25
4
5
6
REF. E 235 - A / SP
Welding parameters
Length
Current
mm
A
300
300
350
450
450
450
50 70
65 90
110 140
140 170
180 220
230 280
Weight/
Packet
kg
3.4
4
4.4
5.8
5.8
6
Packing
Weight/
carton
kg
17
20
22
29
29
30
Weight/
1000 pcs
kg *
19.5
approximate data
Date:2013-08-07
C4
Classification:
d.o.o.
EN 499:
DIN 1913:
AWS A-5.1:
EN ISO 2560-A:
EN ISO 2560-B:
EVB 47
E 38 2 B 32 H5
E 43 55 B 10
E 6019
E 38 2 B 32 H5
E 43 18 A
Basic electrode with lower tensile strength and increased yield strength, therefore suitable for welding rigid
constructions.
Base materials:
Unalloyed steel
Fine grained steel
Boiler plate
Pipe steel
Shipbulding steel
Cast iron
SIST EN
S185 - E335
S235N - S355N
P255NH - P355NH
S420ML
P235GH, P265GH
P295GH, P355GH
P235G1TH - P355T2
L210 - L360GA
L240NB - L415NB
S235JRS2-S235J4S
S310G1S S355G2S
GE200 GE260
DIN
St 33 - St 60.2
St E 255 - St E 355
W St E 255 - W St E 355
TStE 420 TM
H I, H II,
17Mn4, 19Mn5
St 35 - St 52.4
St E 210.7
StE290.7 StE415.7
GL-A, do GL-E
GL-A32 do GL-D36
GS-38 do GS-52
W.Nr.
1.0035, 1.0060
1.0461, 1.0545
1.0462, 1.0565
1.8836
1.0345, 1.0425
1.0481, 1.0473
1.0308, 1.0581
1.0307, 1.0499
1.0484, 1.8972
1.0441, 1.0476
1.0513, 1.0585
1.0420, 1.0552
Coating type:
Welding current:
Chemical composition, wt %:
C
Si
0.04
0.30
Basic
DC +
AC (OCV>70 V)
Mn
0.85
Mechanical properties:
Welding positions:
Redrying temperature:
400C / 1 h
Yield strength
ReL / Rp 0.2:
> 420
MPa (N/mm )
Tensile strength
Rm:
470 530
MPa (N/mm )
Elongation
A5:
> 24
Impact energy
KV :
> 47
J (-20C)
mm
Approvals:
2
2.5
3.25
4
5
6
8
REF. E 230 - A / SM
Welding parameters
Length
Current
mm
A
300
300
350
450
450
450
450
50 70
65 90
110 140
140 180
180 230
240 290
350 450
Weight/
Packet
kg
4
3.4
4
5.4
5.4
5.4
5.4
Packing
Weight/
carton
kg
20
17
20
27
27
27
27
Weight/
1000 pcs
kg *
19,5
approximate data
Date:2013-08-06
C5
Classification:
d.o.o.
EN 499:
DIN 1913:
AWS A-5.1
EN ISO 2560-A:
EN ISO 2560-B:
EVB S
E 42 4 B 12 H10
E 51 43 B(R)10
E 7016
E 42 4 B 12 H10
E 49 16 A
Doublecoated, basic CTOD-tested electrode with excellent welding properties in difficult positions. It has stable
welding arc. Very suitable for welding root-runs with DC and AC current.
Base materials:
Unalloyed steel
Fine grained steel
Boiler plate
Pipe steel
Shipbulding plate
Cast iron
SIST EN
S185 - E335
S235N - S355N
P255NH - P355NH
S420ML
P235GH, P265GH
P295GH, P355GH
P235G1TH - P355T2
L210 - L360GA
L240NB - L415NB
S235JRS2-S235J4S
S310G1S S355G2S
GE200 GE260
DIN
St 33 - St 60.2
St E 255 - St E 355
W St E 255 - W St E 355
TStE 420 TM
H I, H II,
17Mn4, 19Mn5
St 35 - St 52.4
St E 210.7
StE290.7 StE415.7
GL-A, do GL-E
GL-A32 do GL-D36
GS-38 do GS-52
W.Nr.
1.0035, 1.0060
1.0461, 1.0545
1.0462, 1.0565
1.8836
1.0345, 1.0425
1.0481, 1.0473
1.0308, 1.0581
1.0307, 1.0499
1.0484, 1.8972
1.0441, 1.0476
1.0513, 1.0585
1.0420, 1.0552
Coating type:
Welding current:
Chemical composition, wt %:
C
Si
0.05
0.65
Rutile-basic
DC +
AC
Mn
1.0
Mechanical properties:
Welding positions:
Redrying temperature:
380C / 1 h
Yield strength
ReL / Rp 0.2:
> 420
MPa (N/mm )
Tensile strength
Rm:
500 640
MPa (N/mm )
Elongation
A5:
> 22
Impact energy
KV :
> 47
J (-40C)
mm
Approvals:
TV
DB
S
DNV 3YH10
2
2.5
3.25
4
5
6
REF. E 215 - A / SM
Welding parameters
Length
Current
mm
A
300
350
350/450
450
450
450
55 65
60 90
90 140
140 190
190 250
250 320
Weight/
Packet
kg
3.4
4
4/5
5
5
5
Packing
Weight/
carton
kg
17
2.5
20/25
25
25
25
Weight/
1000 pcs
kg *
10.5
19.6
32.8/43
66.7
100
approximate data
Date2010-02-16
C6
Classification:
d.o.o.
GALEB 50
EN 499:
DIN 1913:
AWS A-5.1
EN ISO 2560-A:
EN ISO 2560-B:
E 42 2 B 32
E 51 54 B(R)10
E 7016
E 42 2 B 32 H5
E 49 16 A
Basic electrode for welding structural steels also in thin plates; insensitive to impurities in base material.
Base materials:
Unalloyed steel
Fine grained steel
Boiler plate
Pipe steel
Shipbulding plate
Cast iron
SIST EN
S185 - E335
S235N - S355N
P255NH - P355NH
S420ML
P235GH, P265GH
P295GH, P355GH
P235G1TH - P355T2
L210 - L360GA
L240NB - L415NB
S235JRS2-S235J4S
S310G1S S355G2S
GE200 GE260
DIN
St 33 - St 60.2
St E 255 - St E 355
W St E 255 - W St E 355
TStE 420 TM
H I, H II,
17Mn4, 19Mn5
St 35 - St 52.4
St E 210.7
StE290.7 StE415.7
GL-A, do GL-E
GL-A32 do GL-D36
GS-38 do GS-52
W.Nr.
1.0035, 1.0060
1.0461, 1.0545
1.0462, 1.0565
1.8836
1.0345, 1.0425
1.0481, 1.0473
1.0308, 1.0581
1.0307, 1.0499
1.0484, 1.8972
1.0441, 1.0476
1.0513, 1.0585
1.0420, 1.0552
Coating type:
Welding current:
Chemical composition, wt %:
C
Si
0.10
0.50
Basic
DC +
AC (OCV>70 V)
Mn
1.0
Mechanical properties:
Welding positions:
Redrying temperature:
400C / 1 h
> 420
ReL / Rp 0.2:
Tensile strength
Rm:
510 570
MPa (N/mm )
Elongation
A5:
> 24
Impact energy
KV :
> 47
> 47
Hydrogen content: < 5 ml / 100 g weld metal
mm
Approvals:
2
2.5
3.25
4
5
6
REF. E 210 - A / SM
Yield strength
Welding parameters
Length
Current
mm
A
300
300
350
450
450
450
50 60
60 80
110 130
130 160
170 200
200 230
Weight/
Packet
kg
3.4
4
4.4
5.4
5.4
6
MPa (N/mm )
2
J (-20C)
J (-40C)
Packing
Weight/
carton
kg
17
20
22
27
27
30
Weight/
1000 pcs
kg *
67,5
approximate data
Date:2013-08-07
C7
Classification:
d.o.o.
EN 499:
DIN 1913:
AWS A-5.1:
EN ISO 2560-A:
EN ISO 2560-B:
EVB K
E 42 2 B 12 H5
E 51 43 B(R) 10
E 7016
E 42 2 B 12 H5
E 49 16-P1 A
Basic electrode for exclusive use for one side welding of pipes and general structure. Low hydrogen type electrode,
good arc stability. Performed one side welding with relatively low currents, good slag detachability and smooth
weld beads.
Base materials:
Unalloyed steel
Fine grained steel
Boiler plate
Pipe steel
Shipbulding plate
Cast iron
SIST EN
S185 - E360
S235N - S355N
S420ML
P235GH, P265GH
P295GH, P355GH
P235G1TH - P355T2
L240NB - L415NB
(X 42 do X 60)
S235JRS2-S235J4S
S310G1S S355G2S
GE200 GE260
DIN
St 33 - St 70.2
St E 255 - St E 355
TStE 420 TM
H I, H II,
17Mn4, 19Mn5
St 35 - St 52.4
StE290.7 StE415.7
W.Nr.
1.0035, 1.0070
1.0461, 1.0545
1.8836
1.0345, 1.0425
1.0481, 1.0473
1.0308, 1.0581
1.0484, 1.8972
GL-A, do GL-E
GL-A32 do GL-D36
GS-38 do GS-52
1.0441, 1.0476
1.0513, 1.0585
1.0420, 1.0552
Coating type:
Welding current:
Chemical composition, wt %:
C
Si
0.06
0.60
basic
DC +
DC (for only root pass)
AC (OCV > 70V)
Mn
1.3
Mechanical properties:
Welding positions:
Redrying temperature:
ReL / Rp 0.2:
> 420
MPa (N/mm )
Tensile strength
Rm:
Elongation
A5:
> 24 %
Impact energy
KV :
> 47 J
(-20C)
> 47 J
(-40C)
Hydrogen content: < 5 ml / 100 g weld metal
400 C / 1 h
mm
Approvals:
2.5
3.25
4
5
6
REF. E 220 - A / SP
Yield strength
Welding parameters
Length
Current
mm
A
350
350
450
450
450
60 90
95 150
125 190
190 250
240 350
Weight/
Packet
kg
4.4
4.4
5.4
5.4
6
Packing
Weight/
carton
kg
22
22
29
29
30
Weight/
1000 pcs
kg *
22
32.5
65.0
96.5
167
approximate data
Date:2005-01-14
C8
Notes:
EVB 60 . D1
EVB 65 . D2
EVB Ni .. D3
EVB CuNi D4
EVB CuNiCr . D5
EVB NiMo D6
GALEB 70 D7
EVB 2.5 Ni ... D8
EVB 2.5 NiMo . D9
EVB 62.D10
EVB 75 . D11
EVB CrNiMo ......................... D12
EVB 80 . D13
EVB 100 .. D14
EVB 100 EKSTRA . D15
EVB SP2 D16
Classification:
d.o.o.
EN 499:
DIN 8529:
AWS A-5.5:
EN ISO 2560-A:
EN ISO 2560-B:
EVB 60
E 50 4 Mo B 42
EY 50 75 Mn1 MoB
E 8018-G
E 50 4 MoB 42 H5
E 57 18-3M2A
Mn and Mo alloyed basic electrode for welding steels and steel castings with tensile strength up to 735 N/mm2
and finegrained steels with yield strength up to 550 MPa.
Base materials:
DIN:
St 44.2 to St 70.2
StE 255 to StE 500
WStE 255 to WStE 500
Boiler plates:
HI, HII, 17 Mn4, 19Mn5
Ageing resistant steels: ASt 41, ASt 45, ASt 52
Pipe steels:
St 35 to St 52.4
Shipbilding plates:
A to E,
AH 32 to EH 36
Steel castings:
GS-38 to GS-60
W.Nr.:
1.0035 to 1.0070
1.0461 to 1.8907
1.0462 to 1.8937
1.0345, 1.0425, 1.0481, 1.0482
1.0426, 1.0436, 1.0577
1.0308 to 1.0581
1.0440 to 1.0476
Unalloyed steels:
Finegrained steels:
1.0416 to 1.0553
Coating type:
Welding current:
Chemical composition, wt %:
C
Si
0.07
0.45
Basic
DC +
Welding positions:
Mn
1.30
Mo
0.35
Mechanical properties:
Redrying temperature:
400C / 1 h
Yield strength
ReL / Rp 0.2:
Tensile strength
Rm:
Elongation
A5:
> 22
Impact energy
KV :
> 47
J (-40C)
620 720
MPa (N/mm )
CR:
ABS
BV:
GL:
LR:
DNV:
S
PRS:
mm
3Y40
3Y40
3Y40HH
3Y40H15
3/3YH
3Y40H15
2.5
3.25
4
5
6
3H10,3Y40H10
REF. E 350 - A / SM
Welding parameters
Length
Current
mm
A
300
350
450
450
450
65 90
110 140
140 180
180 230
240 290
Weight/
Packet
kg
3.4
4
5.4
5.4
5.4
Packing
Weight/
carton
kg
17
20
27
27
27
Weight/
1000 pcs
kg *
19.8
36.4
66.7
101.9
150
approximate data
Date:2011-12-23
D1
Classification:
EN 499
DIN 8529:
AWS A-5.5:
EN ISO 18275-A:
d.o.o.
E 55 6 Mn 1 Ni Mo B 42H5
EY 55 76 Mn 1 NiMo B H5
E 9018-G
E 55 6 Mn 1 NiMo B42H5
EVB 65
Mn, Ni and Mo alloyed basic electrode with excellent welding characteristics. Electrode runs with a smooth stable
arc. It has very good slag removal and minimum spatter. Weld metal has low hydrogen content.
Base materials:
Unalloyed steels: StE355 StE500, WStE 355 WStE500, EStE 355 EStE 500
High tensile steels: TStE 500
Creep resistant steels: 17 MnMoV64 , 15NiCuMoNb5, 11NiMoV 53, 20 MnMoNi 45
Coating type:
Welding current:
Chemical composition, wt %:
C
Si
Mn
0.06
0.40
1.60
Welding positions:
Mechanical properties:
basic
DC +
AC (OCV > 70V)
Redrying temperature:
300-350C / 2 h
or
400C / 2 h
Mo
0.30
Ni
1.0
Yield strength
ReL / Rp 0.2:
> 560
MPa (N/mm )
Tensile strength
Rm:
630 - 780
MPa (N/mm )
Elongation
A5:
>20 %
Impact energy
KV :
150 J ( +20 C)
55J ( - 60 C)
mm
Approvals:
2.5
3.2
4.0
5.0
6.0
REF. E 430 - A / MS
Welding parameters
Length
Current
mm
A
350
350
450
450
450
65-95
90-140
140-185
180-240
210-310
Weight/
packet
kg
4
4
5.4
5.4
5.7
Packing
Weight/
carton
kg
20
20
27
27
28.5
Weight/
1000 pcs
kg *
22
37
69
104
164
approximate data
Date:2011-12-16
D2
Classification:
EN 499:
DIN 8529:
AWS A-5.5:
d.o.o.
E 50 6 1 Ni B 42 H5
EY 50 75 Mn1 NiB
E 8018-G
E 7018-G
AWS A-5.5:
E 8018-C3
EN ISO 2560-A: E 50 6 1Ni B 42 H5
EN ISO 2560-B: E 55 16-3N3 A
EVB Ni
Ni alloyed basic, CTOD-tested electrode for welding steels and steel castings with tensile strength up to 685
MPa and finegrained steels with yield strength up to 460 MPa. Guaranteed mechanical properties at law
temperatures.
Base materials:
DIN:
St 52.3 to St 70.2
StE 380 to StE 460
WStE 380 to WStE 460
Finegr.microalloy.steels TStE 380 to TStE 460
Ni alloyed steels
13MnNi63, 15MnNi63
Boiler plates:
17Mn4, 19Mn5
Steel castings:
GS-52, GS-60
Weather corr.resist.steel: CORTEN, Patinax
W.Nr.:
1.0570 to 1.0070
1.8900 to 1.8905
1.8930 to 1.8935
1.8910 to 1.8915
1.6217, 1.6210
1.0481 1.0482
1.0551, 1.0553
Unalloyed steels:
Finegrained steels:
Coating type:
Welding current:
Chemical composition, wt %:
C
Si
0.06
0.4
Basic
DC +
Welding positions:
Mn
1.3
Mechanical properties:
Redrying temperature:
400C / 1 h
Ni
0.9
as welded
2
Yield strength
ReL / Rp 0.2::
> 500
MPa (N/mm )
Tensile strength
Rm:
570 720
MPa (N/mm )
Elongation
A5:
> 22
Impact energy
KV :
> 47
J (-60 C)
mm
Approvals:
CR: 5Y46H
LR: 5Y46H
DNV: 5Y46H
TV
DB
S
2.5
3.25
4
5
6
REF. E 360 - A / M
Welding parameters
Length
Current
mm
A
300
350
450
450
450
65 90
110 140
140 180
180 230
240 - 250
Weight/
Packet
kg
3.4
4
5.4
5.4
5.4
Packing
Weight/
carton
kg
17
20
27
27
27
Weight/
1000 pcs
kg *
19.8
36.4
66.7
101.9
approximate data
Date:2013-08-07
D3
Classification:
d.o.o.
EVB CuNi
EN 499
DIN 8529:
AWS A-5.5:
EN ISO 2560-A:
EN ISO 2560-B:
E 46 4 ZB 42 H5
EY 50 75 CuNi B
E 7018-G
E 46 4 ZB 42 H5
E 49 16-NC A
Cu and Ni alloyed basic electrode for welding weather-resistant steels with yield strength of about 460 MPa.
Base materials:
DIN:
Weather corr.resist.steel: WTSt 37, WTSt 52
CORTEN A, B, C,
Patinax 37
RBH 35
Acor 37, Acor 50
HSB 51, HSB 55 C
W.Nr.:
1.8962, 1.8963, 1.8965
1.8960
Coating type:
Welding current:
Chemical composition, wt %:
C
Si
Mn
0.06
0.50
1.0
Basic
DC +
Welding positions:
Cu
0.40
Mechanical properties:
Redrying temperature:
400C / 1 h
ReL / Rp 0.2:
> 460
Tensile strength
Rm:
540 620
MPa (N/mm )
Elongation
A5:
> 20
Impact energy
KV :
> 47
> 47
Hydrogen content: < 5 ml / 100 g weld metal
mm
Approvals:
/
2.5
3.25
4
5
Yield strength
REF. E 370 - A / SM
Ni
0.70
Welding parameters
Length
Current
mm
A
300
350
450
450
65 90
110 140
140 180
180 230
Weight/
Packet
kg
3.4
4
5.4
5.4
MPa (N/mm )
2
J (-20C)
J (-40C)
Packing
Weight/
carton
kg
17
20
27
27
Weight/
1000 pcs
kg *
18
36.4
67
101.9
approximate data
Date:2013-08-07
D4
Classification:
d.o.o.
EVB CuNiCr
EN 499:
AWS A-5.5:
AWS A-5.5:
SN 05 5010:
EN ISO 2560-A:
EN ISO 2560-B:
E 46 4 Z B 42 H5
E 8018-W2
E 7018-G
E NiCrCu-14B
E 46 4 Z B 42 H5
E 49 16-NCC1A
Cu, Ni and Cr alloyed, low hydrogen basic electrode for welding weather-resistant steels (resistant to
atmospheric corrosion) with yield strength of about 460 MPa. Principal applications: public buildings,
department of civil engineering, navy, tanks, water tower, bridges, crash barrier, electrical pylons.
Base materials:
Weather corr.resist.steel
Corten steel:
Atmofix steel
SN
15 217
S355J2G1W
CORTEN A, B, C
W.Nr.:
1.8963
Coating type:
Welding current:
Chemical composition, wt %:
C
Si
Mn
0.07
0.50
1.0
Basic
DC +
Welding positions:
Cu
0.40
Ni
0.70
Cr
0.50
Mechanical properties:
Redrying temperature:
400C / 1 h
Yield strength
ReL / Rp 0.2:
> 460
MPa (N/mm )
Tensile strength
Rm:
530 680
Elongation
A5:
> 22
Impact energy
KV :
> 47
J (-40C)
MPa (N/mm )
mm
Approvals:
/
2.5
3.25
4
5
REF. E 375 - A / SP
Welding parameters
Length
Current
mm
A
300
350
450
450
65 90
110 140
140 180
180 230
Weight/
Packet
kg
3.4
4
5.4
5.4
Packing
Weight/
carton
kg
17
20
27
27
Weight/
1000 pcs
kg *
19.8
36.4
66.7
101.9
approximate data
Date:2013-08-07
D5
Classification:
d.o.o.
EVB NiMo
EN 499:
DIN 8529:
AWS A-5.5:
EN ISO 2560-A:
EN ISO 2560-B:
E 50 41 NiMo B 42 H5
EY 50 76 1 NiMo B
E 8018-G
E 50 41 NiMo B 42H5
E 57 18-N2M3 A
Ni and Mo alloyed basic, CTOD-tested electrode for welding low alloyed steels with tensile strength up to 735
MPa and finegrained steels with yield strength up to 500 MPa. Guaranteed mechanical properties at law
temperatures.
Base materials:
Unalloyed steels:
Finegrained steels:
DIN:
St 52.3 to St 70.2
StE 460, StE 460
WStE 460, WStE 500
TStE 460, TStE 500
NAXTRA 56, NAXTRA 63
W.Nr.:
1.0570 to 1.0070
1.8905, 1.8907
1.8935, 1.8937
1.8915, 1.8917
1.7279
Coating type:
Welding current:
Chemical composition, wt %:
C
Si
Mn
0.06
0.50
1.0
Basic
DC +
Welding positions:
Ni
1.10
Mechanical properties:
Redrying temperature:
400C / 1 h
ReL / Rp 0.2::
> 510
Tensile strength
Rm:
580 710
MPa (N/mm )
Elongation
A5:
> 22
Impact energy
KV :
> 47
> 47
Hydrogen content: < 5 ml / 100 g weld metal
mm
Approvals:
2.5
3.25
4
5
Yield strength
REF. E 395 - A / SM
Mo
0.30
Welding parameters
Length
Current
mm
A
300
350
450
450
65 90
110 140
140 180
180 230
Weight/
Packet
kg
3.4
4
5.4
5.4
MPa (N/mm )
2
J (-20C)
J (-40C)
Packing
Weight/
carton
kg
17
20
27
27
Weight/
1000 pcs
kg *
18.1
36.4
67
101.9
approximate data
Date:2013-08-07
D6
Classification:
d.o.o.
GALEB 70
EN 499:
DIN 8529:
AWS A-5.5:
EN ISO 2560-A:
EN ISO 2560-B:
E 50 2 Mn1Ni B 42 H5
EY 50 75 1 NiMo B
E 9016-G
E 50 2 Mn1Ni B 42 H5
E 57 16-N2M3 A
Mn, Ni and Mo alloyed basic electrode for welding low alloyed steels with tensile strength up to 735 MPa
and finegrained steels with yield strength up to 500 MPa. Preheating and interpass temperature, as well as
postweld heat treatment as required by the base metal.
Base materials:
DIN:
St 50.2, St 60.2, St 70.2
StE 380, StE 500
WStE 380, WStE 500
Heat resistant steels:
WB 35, WB 36,
BHW 35, BHW 38
Steel castings:
GS-60, GS-70
Rail steels:
Rm to 880 N/mm2
Medium alloyed steels:
Ni-Cr-Mo- base
W.Nr.:
1.0050, 1.0060, 1.0070
1.8900, 1.8907
1.8930, 1.8937
1.8817, 1.6368
Unalloyed steels:
Finegrained steels:
1.0553, 1.0554
Coating type:
Welding current:
Chemical composition, wt %:
C
Si
Mn
0.08
0.70
1.50
Basic
DC +
Welding positions:
Ni
0.70
Mechanical properties:
Redrying temperature:
400C / 1 h
Yield strength
ReL / Rp 0.2:
> 520
Tensile strength
Rm:
640 710
Elongation
A5:
> 22
Impact energy
KV :
> 125
> 47
Hydrogen content: < 5 ml / 100 g weld metal
mm
Approvals:
2
2.5
3.25
4
5
REF. E 380 - A / SP
Mo
0.20
Welding parameters
Length
Current
mm
A
300
300
350
450
450
50 60
60 90
110 130
130 160
170 200
Weight/
Packet
kg
3.4
4
4.4
5.4
5.4
MPa (N/mm )
2
MPa (N/mm )
%
J (+20C)
J (-20C)
Packing
Weight/
carton
kg
17
20
22
27
27
Weight/
1000 pcs
kg *
12
18.8
32.1
61.4
96.4
approximate data
Date:2005-07-14
D7
Classification:
d.o.o.
EVB 2.5 Ni
EN 499:
DIN 8529:
AWS A-5.5:
EN ISO 2560-A:
EN ISO 2560-B:
E 50 6 2Ni B 42 H 10
EY 50 76 2 Ni B
E 8018-C1
E 50 8 2 Ni B 42 H5
E 57 18-3N3 A
Ni alloyed basic electrode for welding low alloyed steels with tensile strength up to 735 MPa and
finegrained steels with yield strength up to 550 MPa. Guaranteed mechanical properties at law
temperatures.
Base materials:
DIN:
Finegrained steels:
EStE 380 to EStE 500
Finegr.microalloy steels
Quenched and tempered steels: NAXTRA 56
Low temperature steels:
TTSt35N to TTSt45V
14Ni6 to 16Ni14
W.Nr.:
1.8911 to 1.8919
1.7279
1.5622 to 1.5639
Coating type:
Welding current:
Chemical composition, wt %:
C
Si
0.05
0.50
Basic
DC +
Welding positions:
Mn
1.0
Ni
2.3
Mechanical properties:
Redrying temperature:
400C / 1 h
Yield strength
ReL / Rp 0.2:
Tensile strength
Rm:
590 670
Elongation
A5:
> 22
Impact energy
KV :
> 47
J (-20C)
> 47
J (-80C)
Hydrogen content: < 5 ml / 100 g weld metal
mm
Approvals:
GL:
6 Y 50 H1O
2.5
3.25
4
5
REF. E 390 - A / MS
Mpa (N/mm )
Welding parameters
Length
Current
mm
A
300/350
350
450
450
70 90
100 140
140 180
180 230
Weight/
Packet
kg
Packing
Weight/
carton
kg
Weight/
1000 pcs
kg *
3.4/4
4
5.4
5.4
17/20
20
27
27
19.8/
36.4
68
101.9
approximate data
Date:2011-02-15
D8
Classification:
EN 757:
DIN 8529:
AWS A-5.5:
ISO 18275-A:
EN ISO 2560-B:
d.o.o.
E 55 6 2NiMo B 42 H5
EY 50 75 2 Ni Mo B
E 9018-G
E 55 6 2 Ni Mo B 42 H5
E 62 18 N4M2A H5
Ni and Mo alloyed basic electrode for welding Ni-Mo alloyed steels with tensile strength up to 785 MPa
finegrained steels with guaranteed mechanical properties at law temperatures and Q&T finegrained steels with
yield strength up to 590 MPa.
Base materials:
DIN:
NAXTRA 56
NAXTRA 63
HY 80
17MnMoV64
22NiMoCr37
GS-60, GS-70
W.Nr.:
1.7279
1.7279
1.6780
1.5403, 1.8817
1.6751
1.0553, 1.0554
Coating type:
Welding current:
Chemical composition, wt %:
C
Si
Mn
0.06
0.45
1.3
Basic
DC +
Welding positions:
Ni
2.3
Mechanical properties:
Redrying temperature:
400C / 1 h
ReL / Rp 0.2:
> 590
Tensile strength
Rm:
650 780
MPa (N/mm )
Elongation
A5:
> 20
Impact energy
KV :
> 47
> 47
Hydrogen content: < 5 ml / 100 g weld metal
mm
Approvals:
/
2.5
3.25
4
5
Yield strength
REF. E 403 - A / SP
Mo
0.40
Welding parameters
Length
Current
mm
A
300
350
450
450
70 90
100 140
140 180
180 230
Weight/
Packet
kg
3.4
4
5.4
5.4
MPa (N/mm )
2
J (-20C)
J (-60C)
Packing
Weight/
carton
kg
17
20
27
27
Weight/
1000 pcs
kg *
19.8
36.4
66.7
101.9
approximate data
Date2005-07-14
D9
Classification:
EN 757:
E 62 4 MnMoB42 H5
AWS A-5.5: E 10018-G10018-D2
EN ISO 18275-A: E 62 4 MnMoB42 H5
EN ISO 18275-B: E 62 18 4M2 H5
d.o.o.
EVB 62
Mn and Mo alloyed basic electrode for welding steels, steel castings and fine-grained steels with tensile
strength over 600 N/mm2.
S(P) 500
S550QL1
AISI 4130 4140, 8630
ASTM Grades A 182; F22
X80
Coating type:
Welding current:
Chemical composition, wt %:
C
Si
0.07
0.4
Basic
DC +
Welding positions:
Mn
1.90
Mo
0.4
Mechanical properties:
Redrying temperature:
400C / 1 h
Yield strength
ReL / Rp 0.2:
> 620
MPa (N/mm )
Tensile strength
Rm:
720 890
MPa (N/mm )
Elongation
A5:
> 18
Impact energy
KV :
> 62
typ >20%
mm
4Y62H
4Y62H
2.5
3.25
4
REF. E 355 / MS
Welding parameters
Length
Current
mm
A
350
350
450
65 90
110 140
140 180
Weight/
Packet
kg
Packing
Weight/
carton
kg
Weight/
1000 pcs
kg *
23,2
35,7
approximate data
Date:2013-08-07
D 10
Classification:
EN 757:
DIN 8529:
AWS A-5.5:
ISO 18275-A:
ISO 18275-B:
EVB 75
d.o.o.
E 69 6 Mn2NiCrMo B 42 H5
EY 69 75 Mn2NiCrMo
E 10018-G
E 69 6 Mn2NiCrMo B 42 H5
E 78 16-N5CM3 A H5
Mn, Ni, Cr and Mo alloyed basic, CTOD-tested electrode for welding similarly alloyed steels with yield strength up to
685 MPa. Cracking resistance and low-temperature, ductility down to -60C.
Preheating, interpass temperature and postweld treatment as required by the base metal.
Base materials:
Quenched and tempered
finegrained steels:
DIN:
NAXTRA 65
NAXTRA 70
HSB 77Y
T 1A
T 1B
W.Nr.:
1.7279
1.8851, 1.8921
1.8852, 1.8922
Coating type:
Welding current:
Chemical composition, wt %:
C
Si
Mn
0.05
0.4
1.5
Basic
DC +
Welding positions:
Cr
0.4
Ni
2
Mo
0.35
Mechanical properties:
Redrying temperature:
400C / 1 h
Yield strength
ReL / Rp 0.2:
Tensile strength
Rm:
Elongation
Impact energy
> 690
MPa (N/mm )
2
780 940
MPa (N/mm )
A5:
> 17
KV :
> 69
J (-60C)
mm
Approvals:
2.5
3.25
4
5
6
8
LR: 5Y69H
DNV: 5Y69H
CR
S
REF. E 451 - A / M
Welding parameters
Length
Current
mm
A
300
350
450
450
450
450
65 90
90 140
140 195
180 240
210 320
Weight/
Packet
kg
3.8
4
5.4
5.4
5.4
5.4
Packing
Weight/
carton
kg
19
20
27
27
27
27
Weight/
1000 pcs
kg *
16.7
34.2
65.1
105.9
150
approximate data
Date:2011-02-15
D11
Classification:
DIN 8529:
AWS A-5.5:
ISO 18275-A:
EY 62 52 1NiCrMo B
E 11018-G
E 62 2Z-B 42 H5
EVB CrNiMo
d.o.o.
Mn, Ni, Cr and Mo alloyed basic electrode for welding similarly alloyed steels and for special purposes.
Preheating, interpass temperature and postweld treatment as required by the base metal.
Base materials:
Finegrained steels:
DIN:
WSt 52.3
CN: 15222
W.Nr.:
1.8963
Coating type:
Welding current:
Chemical composition, wt %:
C
Si
Mn
0.06
0.50
1.0
Basic
DC +
Welding positions:
Cr
0.40
Mo
0.35
Mechanical properties:
Redrying temperature:
400C / 1 h
Yield strength
ReL / Rp 0.2:
> 620
MPa (N/mm )
Tensile strength
Rm:
700 800
MPa (N/mm )
Elongation
A5:
> 18
Impact energy
KV :
mm
Approvals:
2.5
3.25
4
5
6
Welding parameters
Length
Current
mm
A
300
350
450
450
450
65 90
90 140
140 195
180 240
210 320
> 150
> 47
Hydrogen content: < 5 ml / 100 g weld metal
REF. E 305 - A / SP
Ni
1.2
Weight/
Packet
kg
3.8
4
5.4
5.4
5.4
J (+20C)
J (-20C)
Packing
Weight/
carton
kg
19
20
27
27
27
Weight/
1000 pcs
kg *
16.7
34.2
65.1
105.9
150
approximate data
Date:2005-07-14
D12
Classification:
EN 757:
DIN 8529:
AWS A-5.5:
ISO 18275-A:
ISO 18275-B:
EVB 80
d.o.o.
E 69 6 Mn2NiCrMo B 42 H5
EY 69 75 Mn2NiCrMo B
E 10018-G
E 69 6Mn2NiCrMo B 42 H5
E 78 16 N5CM3 A H5
Mn, Ni, Cr and Mo alloyed basic electrode for welding similarly alloyed high tensile steels with yield strength up to
785 MPa. Cracking resistance and low-temperature, ductility down to -60C.
Preheating, interpass temperature and postweld treatment as required by the base metal.
Base materials:
Quenched and tempered
finegrained steels:
DIN:
NAXTRA 70
NAXTRA 75
HSB 77Y, HSY 100
T 1A
T 1B
W.Nr.:
1.7279
1.8851, 1.8921
1.8852, 1.8922
Coating type:
Welding current:
Chemical composition, wt %:
C
Si
Mn
0.05
0.40
1.80
Basic
DC +
Welding positions:
Cr
0.40
Ni
2.2
Mechanical properties:
Redrying temperature:
400C / 1 h
ReL / Rp 0.2:
> 700
MPa (N/mm )
Tensile strength
Rm:
810 960
MPa (N/mm )
Elongation
A5:
> 17
Impact energy
KV :
> 47
> 47
Hydrogen content: < 5 ml / 100 g weld metal
mm
Approvals:
/
2.5
3.25
4
5
6
Yield strength
REF. E 461 - A / SM
Mo
0.45
Welding parameters
Length
Current
mm
A
300/350
350
450
450
450
65 90
90 140
140 195
180 240
210 320
J (-20C)
J (-60C)
Weight/
Packet
kg
Packing
Weight/
carton
kg
Weight/
1000 pcs
kg *
3.8/4
4
5.4
5.4
5.4
19/25
20
27
27
27
16.7/
34.2
65.1
105.9
150
approximate data
Date:2013-08-07
D13
Classification:
EN 757:
DIN 8529:
AWS A-5.5:
ISO 18275-A:
ISO 18275-B:
EVB 100
d.o.o.
E 79 4 Mn2Ni1CrMo B 42
EY 79 64 Mn2Ni1CrMoB
E 12018-G
E 79 4 Mn2Ni1CrMo B42 H5
E 8316 N5CM3 H5
Mn, Ni, Cr and Mo alloyed basic electrode for welding similarly alloyed high tensile steels with yield strength up to
2
900 N/mm . Cracking resistance and low-temperature, ductility down to -40C.
Preheating, interpass temperature and postweld treatment as required by the base metal.
Base materials:
Quenched and tempered
Wear resistant steels:
Wear resistant steels
DIN:
W.Nr.:
XABO 90
1.8925
Coating type:
Welding current:
Chemical composition, wt %:
C
Si
Mn
0.06
0.40
1.6
Basic
DC +
Welding positions:
Cr
0.75
Mo
0.60
Mechanical properties:
Redrying temperature:
400C / 1 h
ReL / Rp 0.2:
> 790
MPa (N/mm )
Tensile strength
Rm:
900 1080
MPa (N/mm )
Elongation
A5:
> 16
Impact energy
KV :
> 60
> 47
Hydrogen content: < 5 ml / 100 g weld metal
mm
Approvals:
/
2.5
3.25
4
5
6
Yield strength
REF. E 471 - A / SM
Ni
2.4
Welding parameters
Length
Current
mm
A
300
350
450
450
450
65 90
90 140
140 195
180 240
210 320
Weight/
Packet
kg
3.8
4
5.4
5.4
5.4
J (+20C)
J (-40C)
Packing
Weight/
carton
kg
19
20
27
27
27
Weight/
1000 pcs
kg *
16.7
34.2
67.5
105.9
150
approximate data
Date:2013-08-07
D14
Classification:
DIN 8529:
AWS A-5.5:
ISO 18275-A:
ISO 18275-B:
d.o.o.
Y8975 Mn2Ni1CrMo B H5
E 12018 - G
E 89 4 ZB62 H5
E 8316 N5CM3 H5
Basic electrode alloyed with Mn, Cr, Ni and Mo, particularly suitable for welding fine grained similar alloyed
structural steels. Electrode runs with a stable arc, low spatter and easy removal slag.
Base materials:
Heat-treated fine grained structural steels up to a yield strength of 960N/mm2
S 960 QL / TStE 960V
Coating type:
Welding current:
Chemical composition, wt %:
C
Si
Mn
0.07
0.50
1.6
basic
AC(OCV>70V)
DC +
Welding positions:
300-350C/ 2h
Ni
2.5
< 5ml
ReL / Rp 0.2:
> 900
Tensile strength
Rm:
1050 - 1180
Elongation
A5:
> 15
Impact energy
KV :
> 60
> 47
J ( +20 C)
J ( - 40 C)
2.5
3.2
4.0
5.0
Yield strength
mm
REF. E 472 - A / SP
Mo
0.8
Mechanical properties:
Redrying temperature:
Approvals:
Cr
0.90
Welding parameters
Length
Current
mm
A
300
350
450
450
65-95
90-140
140-185
180-240
Weight/
packet
kg
3.8
4.0
5.4
5.4
MPa (N/mm )
2
MPa (N/mm )
Packing
Weight/
carton
kg
19.0
20.0
27.0
27.0
Weight/
1000 pcs
kg *
17.7
34.7
67.6
107.5
approximate data
Date:2005-07-14
D15
Classification:
EN 757:
ISO 18275-A:
ISO 18275-B:
d.o.o.
E 62 4 ZB 34
E 62 4 Z B34
E 69 18 GA
EVB SP2
Basic electrode for rapid joining of large cross section profiles. Profiles can be cut off straight. Applications
rails, thick and concrete bars.
Drying of electrodes before use is recommended.
Base materials:
Coating type:
Welding current:
Chemical composition, wt %:
C
Si
0.08
0.40
Basic
DC +
AC (OCV>70 V)
Mn
1.0
Mechanical properties:
Welding positions:
Redrying temperature:
400C / 1 h
Yield strength
ReL / Rp 0.2:
> 620
MPa (N/mm )
Tensile strength
Rm:
690-890
MPa (N/mm )
Elongation
A5:
> 18
Impact energy
KV :
> 47
J (-40C)
mm
Approvals:
3,25
4
5
6
REF. E 308 A /M
Cr
2,3
Welding parameters
Length
Current
mm
A
350
450
450
450
140 180
180 230
240 290
Weight/
Packet
kg
5.4
5.4
5.4
Packing
Weight/
carton
kg
Weight/
1000 pcs
kg *
27
27
27
approximate data
Date:2003-05-12
D16
Notes:
EVB Mo . E1
EVB MoV E2
EVB CrMo . E3
EVB 2 CrMo .. E4
EVB P 24 .. E5
EVB 5 CrMo .. E6
EVB 9 CrMo .. E7
EVB CrMoV E8
EVB 3 CrMoV . E9
EVB 9 CrMoV . E10
EVB 91 CrMoV ... E11
EVB 911W.E12
EVB Mo1Cr . E13
Classification:
d.o.o.
EN 1599:
EN 499:
DIN 8575:
AWS A-5.5:
EN ISO 2560-A:
EN ISO 2560-B:
EN ISO 3580-A:
EN ISO 3580-B:
EVB Mo
E Mo B 42
E 46 4 MoB 42 H5
E Mo B 26
E 7018-A1H4
E 46 4Mo B 42 H5
E 49 18-3M3 A
E Mo B 42 H5
E 49 18-1M3
Mo alloyed basic electrode for welding creep resistant steels with yield strength up to 460C. Suited for working
temperatures for 40C to 525C.
Base materials:
Unalloyed steels:
Finegrained steels:
Boiler plates:
Pipe steels:
Steel castings:
DIN:
St 37.2 to St 52.3
WStE 380 to WStE 460
H I, H II, H III
17 Mn4, 19 Mn5, 15 Mo3
St 35.8, St 45.8
15 Mo3
GS-22 Mo4
W.Nr.:
1.0037 to 1.0570
1.8930 to 1.8935
1.0345, 1.0425, 1.0435
1.0481, 1.0482, 1.5415
1.0305, 1.0405
1.5415
1.5419
Coating type:
Welding current:
Chemical composition, wt %:
C
Si
0.05
0.60
Basic
DC +
Welding positions:
Mn
0.95
Mo
0.50
Mechanical properties:
Redrying temperature:
400C / 1 h
ReL / Rp 0.2:
> 460
Tensile strength
Rm:
Elongation
A5:
> 22
MPa(N/mm )
2
Impact energy
KV :
> 47
J (-20C)
> 47
J (-40C)
Hydrogen content: < 4 ml / 100 g weld metal
mm
Approvals:
TV
2.5
3.25
4
5
6
REF. E 250 - A / SM
Yield strength
Welding parameters
Length
Current
mm
A
300/350
350
450
450
450
65 95
110 140
140 180
180 230
240 290
Weight/
Packet
kg
Packing
Weight/
carton
kg
3.4/4
4
5.4
5.4
5.4
17/25
20
27
27
27
Weight/
1000 pcs
kg *
19.0/21.9
36,7
67.5
106
150
approximate data
Date:2013-08-07
E1
Classification:
d.o.o.
EVB MoV
EN 1599:
DIN 8575:
AWS A-5.5:
EN ISO 3580-A:
EN ISO 3580-B:
E MoV B 42
E MoV B 20+
E 8018-G
E MoV B 42 H5
E 62 18-G H5
Cr, Mo and V-alloyed basic electrode for welding similarly alloyed steels and steel castings for working
temperatures up to 500C. Suitable for reparatur-welding CrMoV and CrMnV steels.
Base materials:
Boiler plates:
Steel castings:
DIN:
14 MoV63, 21 MoV53,
17 MoV84, 24 CrMoV 55
10CrSiMoV7
GS-17 CrMoV 5.11
W.Nr.:
1.7715, 1.5404,
1.5406, 1.7733
1.8075
1.7706
Heat treatment:
Coating type:
Welding current:
Chemical composition, wt %:
C
Si
Mn
0.05
0.70
1.0
Basic
DC +
Welding positions:
Cr
0.50
Mo
1.0
V
0.35
Mechanical properties:
Redrying temperature:
400C / 1 h
Yield strength
ReL / Rp 0.2:
> 500
MPa(N/mm )
Tensile strength
Rm:
650 750
MPa(N/mm )
Elongation
A5:
> 20
Impact energy
KV :
> 95
J (+20C)
mm
Approvals:
2.5
3.25
4
5
6
REF. E 270 - A / SM
Welding parameters
Length
Current
mm
A
300/350
350
450
450
450
65 95
100 130
140 180
180 230
240 290
Weight/
Packet
kg
Packing
Weight/
carton
kg
3.4/4
4
5.4
5.4
5.4
17/20
20
27
27
27
Weight/
1000 pcs
kg *
19.8/22,1
36.4
66.7
101.9
approximate data
Date:2013-08-07
E2
Classification:
d.o.o.
EN 1599:
DIN 8575:
AWS A-5.5:
EN ISO 3580-A:
EN ISO 3580-B:
EVB CrMo
E CrMo1 B 42
E CrMo1 B 20+
E 8018-B2
E CrMo1 B 42 H5
E 55 18-1CM H5
Cr and Mo-alloyed basic electrode for welding creep resistant steels and steel castings for working
temperature up to 550C, as for similarly alloyed steels, quenched and tempered for cementation and
nitriding.
Base materials:
DIN:
13CrMo44, 15CrMo3
13CrMoV42
(HIV)
Steel for the cementation:
15Cr3, 16MnCr5
20MnCr5, 15CrMo5
Quenched and tempered steel: 25CrMo4
Steel castings:
GS-22CrMo5, GS-22CrMo54
W.Nr.:
1.7335, -
1.7015, 1.7131
1.7147, 1.7262
1.7218
1.7354
Heat treatment:
Stress relieved: 680 C / 2 h, oven-cooling down to 300 C and then cooled on the air.
Coating type:
Welding current:
Chemical composition, wt %:
C
Si
Mn
0.06
0.60
0.95
Basic
DC +
Welding positions:
Cr
1.10
Mo
0.50
Mechanical properties:
Redrying temperature:
400C / 1 h
Yield strength
ReL / Rp 0.2:
> 470
MPa(N/mm )
Tensile strength
Rm:
570 670
MPa(N/mm )
Elongation
A5:
> 20
Impact energy
KV :
> 95
J (+20C)
mm
Approvals:
TV
DB
2.5
3.25
4
5
6
REF. E 260 - A / SP
Welding parameters
Length
Current
mm
A
300
350
450
450
450
65 95
100 130
140 180
180 230
240 290
Weight/
Packet
kg
3.4
4
5.4
5.4
5.4
Packing
Weight/
carton
kg
17
20
27
27
27
Weight/
1000 pcs
kg *
19.8
36.4
66.7
101.9
150
approximate data
Date:2004-06-28
E3
Classification:
EVB 2 CrMo
d.o.o.
EN 1599:
DIN 8575:
AWS A-5.5:
EN ISO 3580-A:
EN ISO 3580-B:
E CrMo2 B 42
E CrMo2 B 20+
E 9018-B3
E CrMo2 B42 H5
E 62 18-2C1M H5
Cr and Mo-alloyed basic electrode for welding creep resistant steels and steel castings for working temperatures
up to 600C, as for similarly alloyed steels, quenched and tempered for cementation and nitriding.
Base materials:
Heat resistant steel
Quanched and tempered steel
Steel casting
SIST EN
10CrMo9-10
12CrMo9-10
10CrSiMoV7
DIN
10CrMo9-10
12CrMo9-10
W.Nr.
1.7380
1.7375
1.8075
1.7707
1.7379
30CrMoV9
GS-18CrMo9.10
Heat treatment:
Stress relieved: 690 C / 2 h, oven-cooling down to 400 C and then cooled on the air.
Coating type:
Welding current:
Chemical composition, wt %:
C
Si
Mn
0.06
0.60
0.90
Basic
DC +
Welding positions:
Cr
2.4
Mo
1.0
Mechanical properties:
Redrying temperature:
400C / 1 h
Yield strength
ReL / Rp 0.2:
> 520
MPa(N/mm )
Tensile strength
Rm:
620 720
MPa(N/mm )
Elongation
A5:
> 18
Impact energy
KV :
> 95
J (+20C)
mm
Approvals:
TV
DB
2.5
3.25
4
5
6
REF. E 280 - A / SM
Welding parameters
Length
Current
mm
A
300
350
450
450
450
70 95
100 130
150 180
180 220
240 290
Weight/
Packet
kg
3.4
4
5.4
5.4
5.4
Packing
Weight/
carton
kg
17
20
27
27
27
Weight/
1000 pcs
kg *
18.5
36.4
67.5
101.9
150
approximate data
Date:2011-12-08
E4
Classification:
EN ISO 3580-A:
EN ISO 3580-B:
d.o.o.
E Z B42 H5
E 55 18-3C1MV
EVB P24
Cr , Mo, V and B alloyed basic electrode for welding creep resistant Cr-Mo,Cr-Mo-V in T/P 24 boyler, pipe and
tube steels stable till 600 C.
Base materials
Creep resistant steels
P24
Cr Mo and Cr Mo V steels
Heat treatment:
Stress relieved: 2h / 690 C oven-cooling down to 400 C and then cooled on the air. Where necessary PWHT
can be omitted.
Coating type:
Basic
Welding current:
DC +
Si
Mn
Cr
Mo
0,04
0,33
0,6
2,6
0,9
0,2
B
0,0025
Welding positions:
Mechanical properties:
Yield strength ReL / Rp
0.2:
Redrying temperature:
400C / 1 h
Elongation A5:
Impact energy Av (+20C) :
Hydrogen content:
as welded
PWHT
2
Approvals:
2.5
3.25
4
5
6
> 15 %
> 15 %
> 40
REF. E 285 - A / M
Welding parameters
Length
Current
mm
A
300
350
450
450
450
mm
70 95
100 130
150 180
180 220
240 290
Weight/
Packet
kg
3.4
4
5.4
5.4
5.4
Packing
Weight/
carton
kg
17
20
27
27
27
Weight/
1000 pcs
kg *
19.8
36.4
66.7
101.9
150
approximate data
Date:2005-07-14
E5
Classification:
EN 1599:
DIN 8575:
AWS A-5.4:
EN ISO 3580-A:
EN ISO 3580-B:
EVB 5 CrMo
d.o.o.
E CrMo5 B 42
E CrMo5 B 20+
E 502-15
E CrMo5 B42 H5
E 55 15 5CM-H5
Cr and Mo-alloyed basic electrode for welding creep resistant steels and steel castings for working temperatures up
to 600C. The weld metal is resistant to high hydrogen pressure. The electrode is recommended for applications in
the construction and maintenance of modern power station, oil (cracking plant) and chemical plants.
Base materials:
Heat and H2 resistant steel
SIST EN
X12CrMo5
DIN
12 CrMo 19 5
W.Nr.
1.7362
Steel casting
GX12CrMo5
GS-12CrMo 19 5
1.7363
Heat treatment:
Coating type:
Welding current:
Chemical composition, wt %:
C
Si
Mn
0.06
0.60
0.90
Basic
DC +
Welding positions:
Cr
5.2
Mo
0.50
Mechanical properties:
Redrying temperature:
400C / 1 h
Yield strength
ReL / Rp 0.2:
> 490
MPa(N/mm )
Tensile strength
Rm:
580 740
MPa(N/mm )
Elongation
A5:
> 18
Impact energy
KV :
> 70
J (+20C)
mm
Approvals:
2.5
3.25
4
5
REF. E 330 - A / SP
Welding parameters
Length
Current
mm
A
300
350
450
450
65 85
100 130
140 180
180 230
Weight/
Packet
kg
3.4
4
5.4
5.4
Packing
Weight/
carton
kg
17
20
27
27
Weight/
1000 pcs
kg *
19.8
36.4
66.7
101.9
approximate data
Date:2004-06-28
E6
Classification:
EN 1599:
DIN 8575:
AWS A-5.4:
EN ISO 3580-A:
EN ISO 3580-B:
EVB 9 CrMo
d.o.o.
E CrMo9 B 42
E CrMo9 B 20+
E 505-15
E CrMo9 B42 H5
E 62 15-9C1M H5
Cr and Mo-alloyed basic electrode for welding creep resistant steels and steel castings for working temperatures up
to 600C. The weld metal is resistant to high hydrogen pressure. The electrode is recommended for applications in
oil and chemical industry.
Base materials:
Heat and H2 resistant steel
SIST EN
X11CrMo9-1
X12CrMo7
DIN
X12CrMo9-1
W.Nr.
1.7386
1.7368
Steel castings
GX12CrMo10-1
G-X 12 CrMo 10 1
1.7389
Heat treatment:
Coating type:
Welding current:
Chemical composition, wt %:
C
Si
Mn
0.10
0.30
0.90
Basic
DC +
Welding positions:
Cr
9.0
Mo
1.0
Mechanical properties:
Redrying temperature:
400C / 1 h
Yield strength
ReL / Rp 0.2:
> 550
MPa (N/mm )
Tensile strength
Rm:
680 780
MPa (N/mm )
Elongation
A5:
> 15
Impact energy
KV :
> 50
J (+20C)
mm
Approvals:
2.5
3.25
4
5
REF. E 300 - A / SP
Welding parameters
Length
Current
mm
A
300
350
450
450
65 85
100 130
140 180
180 230
Weight/
Packet
kg
3.4
4
5.4
5.4
Packing
Weight/
carton
kg
17
20
27
27
Weight/
1000 pcs
kg *
19.8
36.4
66.7
101.9
approximate data
Date:2000-01-04
E7
Classification:
EN 1599:
DIN 8575:
EN ISO 3580-A:
EN ISO 3580-B:
d.o.o.
E Cr Mo V1 B
E Cr Mo V1B 20 +
E CrMoV1 B32 H5
E 55 16-GH5
EVB CrMoV
Basic electrode alloyed with Cr, Mo and V, suitable for welding similar cast steels. Electrode runs with a stable
arc, low spatter and easy removal slag. It has uniform bead appearance.
Observe specifications on preheating and post weld heat treatment of base materials.
Base materials:
Heat treatment:
Coating type:
Welding current:
Chemical composition, wt %:
C
Si
Mn
0.11
0.40
0.95
basic
DC +
AC (OCV > 70V)
Welding positions:
Redrying temperature:
300-350C
V
0.25
<5ml
ReL / Rp 0.2:
> 450
MPa(N/mm )
2
Tensile strength
Rm:
> 600
MPa(N/mm )
Elongation
A5:
> 15
Impact energy
KV :
> 50
J ( +20 C)
mm
TV
2.5
3.2
4.0
5.0
6.0
REF. E 265 - A / MS
Mo
0.95
Mechanical properties:
Yield strength
Approvals:
Cr
1.4
Welding parameters
Length
Current
mm
A
350
450
450
450
450
60-90
90-130
140-180
190-230
250-310
Weight/
Packet
kg
4.2
5.8
5.4
5.4
5.7
Packing
Weight/
carton
kg
21
29
27
27
28.5
Weight/
1000 pcs
kg *
21
47
71
114
163
approximate data
Date:2012-01-09
E8
Classification:
EN 1599:
EZ B 42 H5
EN ISO 3580-A: EZ B 42 H5
EN ISO 3580-B: E 62 16-3C1 MV H5
EVB 3 CrMoV
d.o.o.
Mo and Cr and V alloyed basic electrode for welding creep resistant steels and steel castings for working
temperatures up to 600C.
Base materials:
Creep resistant steel
Fine grained steel
SIST EN
10CrMo11
17CrMoV10
DIN
10CrMo11
17CrMoV10
W.Nr.
1.7276
1.7766
Heat treatment:
Preheating and interpass temperature should be 200-250C. Stress relieved: 690 - 730 C / 2h then cooled in
the oven till 300C.
Coating type:
Welding current:
Chemical composition, wt %:
C
Si
Mn
0.1
0.35
0,60
Basic
Welding positions:
Cr
3,0
Mo
1,0
Mechanical properties:
Redrying temperature:
400C / 1 h
350C / 2 h
ReL / Rp 0.2:
> 550
MPa (N/mm )
Tensile strength
Rm:
660- 740
MPa (N/mm )
Elongation
A5:
> 17
Impact energy
KV :
> 50
J (+20C)
Hydrogen content:
mm
Approvals:
2.5
3.25
4
5
6
Yield strength
Welding parameters
Length
Current
mm
A
300
350
450
450
450
REF. E 301 - A / MS
V
0,25
65 95
100 130
140 180
180 230
240 290
Weight/
Packet
kg
3.4
4
5.4
5.4
5.4
Packing
Weight/
carton
kg
17
20
27
27
27
Weight/
1000 pcs
kg *
19.8
36.4
66.7
101.9
150
approximate data
Date:2010-02-16
E9
Classification:
EN 1599:
AWS A-5.5:
EN ISO 3580-A:
EN ISO 3580-B:
E CrMo91B42
E 9016-B9
E CrMo91 B42 H5
E 62 15-9C1MV1 H5
EVB 9 CrMoV
d.o.o.
Cr and Mo-alloyed basic electrode for welding creep resistant heat treated 9-12% chromium steels, especially for
steels T 91 and T 92, for working temperatures up to 600C. Preheat and interpass temperatures 200-300C.
Base materials:
Heat and H2 resistant boiler,
Tube and pipe steel
SIST EN
X11CrMo9-1
X20CrMoV11-1
DIN
X12CrMo9-1
X20CrMoV12-1
W.Nr.
1.7386
1.4922
Heat treatment:
Stress relieved: 750 C / 2 h, oven-cooling down to 300 C and then cooled on the air.
Coating type:
Welding current:
Chemical composition, wt %:
C
Si
Mn
Cr
0.06
0.35
0.60
9.0
Basic
DC +
Welding positions:
Mo
0.9
Ni
0.9
V
0.2
W
0.2
Mechanical properties:
Redrying temperature:
400C / 1 h
Yield strength
ReL / Rp 0.2:
> 500
MPa(N/mm )
Tensile strength
Rm:
650 850
MPa(N/mm )
Elongation
A5:
> 16
Impact energy
KV :
> 50
J (+20C)
mm
Approvals:
2.5
3.25
4
5
REF. E 341 - A / SP
Welding parameters
Length
Current
mm
A
300
350
450
450
65 85
100 130
140 180
180 230
Weight/
Packet
kg
3.4
4
5.4
5.4
Packing
Weight/
carton
kg
17
20
27
27
Weight/
1000 pcs
kg *
19.8
36.4
66.7
101.9
approximate data
Date:2005-10-02
E10
Classification:
EN 1599:
AWS 5.5:
EN ISO 3580-A:
EN ISO 3580-B:
d.o.o.
ECrMo 91B 42
E 9018-B9
E CrMo91 B42 H5
E 62 15-9C1MV H5
EVB 91 CrMoV
Cr and Mo-alloyed basic electrode for welding creep resistant heat treated 9-12% chromium steels, especially for
steels T 91 and T 92, for working temperatures up to 600C. Preheat and interpass temperatures 200-300C.
Base materials:
SIST EN
DIN
X11CrMo9-1
X12CrMo9-1
X20CrMoV11-1
X20CrMoV12-1
X20CrMoWV12-1
ASTM (A199GrT9; A335Gr.P9; A351; A213/213 M Gr.T/P91; Gr.T/P92
W.Nr.
1.7386
1.4922
1.4935
Heat treatment:
Stress relieved: 750 C / 2 h, oven-cooling down to 300 C and then cooled on the air.
Coating type:
Welding current:
Chemical composition, wt %:
C
Si
Mn
Cr
0.09
0.3
0.90
9.0
Basic
DC +
Welding positions:
Mo
0.9
Ni
0.4
V
0.2
Nb
0,06
N
+
Mechanical properties:
Redrying temperature:
400C / 1 h
Yield strength
ReL / Rp 0.2:
> 520
MPa (N/mm )
Tensile strength
Rm:
620 850
MPa (N/mm )
Elongation
A5:
> 17
Impact energy
Av :
> 50
J (+20C)
mm
Approvals:
TV
2.5
3.25
4
5
REF. E 304 A /M
Welding parameters
Length
Current
mm
A
300
350
450
450
65 85
100 130
140 180
180 230
Weight/
Packet
kg
3.4
4
5.4
5.4
Packing
Weight/
carton
kg
17
20
27
27
Weight/
1000 pcs
kg *
19.8
36.4
66.7
101.9
approximate data
Date:2013-08-07
E11
Classification:
EN 1599:
AWS A 5.5:
EZCrMoWVNb 911B42 H5
E 9018- B9
EVB 911 W
d.o.o.
Cr and Mo-alloyed basic electrode for welding creep resistant heat treated 9-12% chromium steels, especially for
steels T 911 and T 92, for working temperatures up to 600C. Preheat and interpass temperatures 200-300C.
Base materials:
Heat and H2 resistant
boiler, tube and pipe steels:
Cast:
DIN:
W.Nr.:
X 11 CrMoWVNb 911
G-X12CrMoWVNbN10 11
1.4905
1.4926
Heat treatment:
Stress relieved: 750 C / 2 h, oven-cooling down to 300 C and then cooled on the air.
Coating type:
Welding current:
Chemical composition, wt %:
C
Si
Mn
Cr
Mo
0.1
0.3
0.90
9.0
0.9
Basic
DC +
Welding positions:
Ni
0.4
V
0.2
Nb W
0.05 1
N
+
Mechanical properties:
Redrying temperature:
400C / 1 h
Yield strength
Rp 0.2 %:
Tensile strength
Rm:
Elongation
A5:
> 17
Impact energy
Av :
> 50
J (20C)
620 850
N/mm2
mm
Approvals:
2.5
3.25
4
5
REF. E299 A /M
300
350
450
450
65 85
100 130
140 180
180 230
Weight/
Packet
kg
3.4
4
5.4
5.4
Packing
Weight/
carton
kg
17
20
27
27
Weight/
1000 pcs
kg *
19.8
36.4
66.7
101.9
approximate data
Date:2012-01-10
E12
Classification:
AWS A-5.5:
EN ISO 3580-A:
EN ISO 3580-B:
d.o.o.
E 8016-B5
E Z B42 H5
E 55 18-1M3 H5
EVB Mo1Cr
Mo and Cr-alloyed basic electrode for welding creep resistant steels and steel castings for working
temperatures up to 580C.
Base materials:
Creep resistant steels
SN: 15 123
Heat treatment:
Coating type:
Welding current:
Chemical composition, wt %:
C
Si
Mn
0.08
0.40
0.80
Basic
Welding positions:
Cr
0.50
Mo
1.0
Mechanical properties:
Redrying temperature:
400C / 1 h
Yield strength
ReL / Rp 0.2:
> 460
MPa(N/mm )
Tensile strength
Rm:
550 700
MPa(N/mm )
Elongation
A5:
> 19
Impact energy
KV :
> 47
J (+20C)
mm
Approvals:
2.5
3.25
4
5
6
8
*
REF. E 255 - A / MS
Welding parameters
Length
Current
mm
A
300
350
450
450
450
450
65 95
100 130
140 180
180 230
240 290
Weight/
Packet
kg
3.4
4
5.4
5.4
5.4
5.4
Packing
Weight/
carton
kg
17
20
27
27
27
27
Weight/
1000 pcs
kg *
19.8
36.4
66.7
101.9
150
approximate data
Date:2012-01-09
E13
E Ti Mo .. F1
E Ti MoV ... F2
E Ti CrMo .. F3
E Ti 2 CrMo .. F4
E Ti 5 CrMo .. F5
Classification:
d.o.o.
EN 499:
AWS A-5.4:
EN ISO 3580-A:
EN ISO 3580-B:
EN ISO 2560-A:
EN ISO 2560-B:
ETiMo
E 46 A Mo R 12
E 8013-G
E A Mo R 12
E 55 13 1M3 A
E 46 A Mo R 12
E 55 13-1M3 A
Mo alloyed rutile electrode for welding creep resistant steels. Suitable for welding root beads; basic type of electrode
recommended for filled welding, suitable for working temperatures up to 500C.
Base materials:
Unalloyed steels:
Boiler plates:
Pipe steels:
DIN:
St 37 to St 52
H I, H II, H III
17 Mn4, 19 Mn5, 15 Mo3
St 35.8, St 45.8
15 Mo3
W.Nr.:
1.0037 to 1.0570
1.0345, 1.0425, 1.0435
1.0481, 1.0482, 1.5415
1.0305, 1.0405
1.5415
Coating type:
Welding current:
Chemical composition, wt %:
C
Si
0.06
0.30
Rutile
AC
DC -
Welding positions:
Mn
0.45
Mo
0.50
Mechanical properties:
Redrying temperature:
120C / 1 h
ReL / Rp 0.2:
> 460
MPa(N/mm )
Tensile strength
Rm:
550 590
MPa(N/mm )
Elongation
A5:
> 20
Impact energy
KV :
> 65
J (+20C)
mm
Approvals:
2.5
3.25
4
5
REF. E 310 - A / SP
Yield strength
300
350
450
450
70 95
115 145
145 190
200 240
Weight/
Packet
kg
4
4
5.4
5.4
Packing
Weight/
carton
kg
20
20
27
27
Weight/
1000 pcs
kg *
18.1
34.8
68.4
110
approximate data
Date:2013-08-07
F1
Classification:
d.o.o.
EN 1599:
DIN 8575:
AWS A-5.5:
EN ISO 3580-A:
EN ISO 3580-B:
E TiMoV
E MoV R 12
E MoV R 22
E 8013-G
E MoV R 12
E 55 13 G
Cr, Mo and V-alloyed rutile electrode for welding similarly alloyed steels and steel castings for working
temperatures up to 550C. Suitable for welding root beads; basic type of electrode recommended for filled weld.
Base materials:
DIN:
Boiler plates and tubes: 14 MoV63, 21 MoV53,
17 MoV84, 24 CrMoV 55
10CrSiMoV7
W.Nr.:
1.7715, 1.5404,
1.5406, 1.7733
1.8075
Heat treatment:
Coating type:
Welding current:
Chemical composition, wt %:
C
Si
Mn
0.10
0.30
0.50
Rutile
AC
DC -
Welding positions:
Cr
0.45
V
0.35
Mechanical properties:
Redrying temperature:
120C / 1 h
ReL / Rp 0.2:
> 470
MPa(N/mm )
Tensile strength
Rm:
610 710
MPa(N/mm )
Elongation
A5:
> 18
Impact energy
KV :
> 65
Welding parameters
Length
Current
mm
A
mm
Approvals:
2.5
3.25
4
5
Yield strength
REF. E 315 - A / SP
Mo
1.0
300
350
450
450
70 90
115 145
145 190
200 240
Weight/
Packet
kg
4
4
5.4
5.4
J (+20C)
Packing
Weight/
carton
kg
20
20
27
27
Weight/
1000 pcs
kg *
18.1
34.8
68.4
110
approximate data
Date:1998-08-24
F2
Classification:
d.o.o.
EN 1599:
DIN 8575:
AWS A-5.5:
EN ISO 3580-A:
EN ISO 3580-B:
E TiCrMo
E CrMo1 R 12
E CrMo1 R 22
E 8013-G
E CrMo1 R 12
E 55 13 1CM
Cr and Mo-alloyed rutile electrode for welding creep resistant Cr-Mo alloyed steels and steel castings for working
temperatures up to 550C. Suitable for welding root beads, basic type of electrode recommended for filled weld.
Base materials:
Boiler plates and tubes:
DIN:
13CrMo44
15CrMo3
13CrMoV42
(HIV)
W.Nr.:
1.7335
Heat treatment:
Stress relieved: 680 C / 2 h, oven-cooling down to 300 C and then cooled on the air.
Coating type:
Welding current:
Chemical composition, wt %:
C
Si
Mn
0.08
0.35
0.50
Rutile
AC
DC -
Welding positions:
Cr
1.0
Mechanical properties:
Redrying temperature:
120C / 1 h
ReL / Rp 0.2:
> 490
MPa(N/mm )
Tensile strength
Rm:
590 690
MPa(N/mm )
Elongation
A5:
> 18
Impact energy
KV :
> 50
Welding parameters
Length
Current
mm
A
mm
Approvals:
2.5
3.25
4
5
Yield strength
REF. E 320 - A / SP
Mo
0.50
300
350
450
450
70 95
115 145
145 190
200 240
Weight/
Packet
kg
4
4
5.4
5.4
J (+20C)
Packing
Weight/
carton
kg
20
20
27
27
Weight/
1000 pcs
kg *
18.1
34.8
68.4
110
approximate data
Date:2004-06-28
F3
Classification:
d.o.o.
E Ti 2CrMo
EN 1599:
DIN 8575:
AWS A-5.5:
EN ISO 3580-A:
EN ISO 3580-B:
E CrMo2 R 12
E CrMo2 R 22
E 9013-G
E CrMo2 R 12
E 62 13 2C1M
Cr and Mo-alloyed rutile electrode for welding creep resistant Cr-Mo alloyed steels and steel castings for working
temperatures up to 600C. Suitable for welding root beads; basic type of electrode recommended for filled weld.
Base materials:
Heat resistant steels:
DIN:
10CrMo9.10
15CrSiMoV7
12CrSiMo8
W.Nr.:
1.7380
Heat treatment:
Stress relieved: 690 C / 2 h, oven-cooling down to 400C and then cooled on the air.
Coating type:
Welding current:
Chemical composition, wt %:
C
Si
Mn
0.10
0.40
0.60
Rutile
AC
DC -
Welding positions:
Cr
2.30
Mechanical properties:
Redrying temperature:
120C / 1 h
ReL / Rp 0.2:
> 520
MPa(N/mm )
Tensile strength
Rm:
620 740
MPa(N/mm )
Elongation
A5:
> 18
Impact energy
KV :
> 50
Welding parameters
Length
Current
mm
A
mm
Approvals:
2.5
3.25
4
5
Yield strength
REF. E 325 - A / SP
Mo
1.0
300
350
450
450
70 95
115 145
145 190
200 240
Weight/
Packet
kg
4
4
5.4
5.4
J (+20C)
Packing
Weight/
carton
kg
20
20
27
27
Weight/
1000 pcs
kg *
18.1
34.8
68.4
110
approximate data
Date:2005-07-08
F4
Classification:
EN 1599:
DIN 8575:
AWS A-5.5:
EN ISO 3580-A:
EN ISO 3580-B:
E CrMo5 R 12
E CrMo5 R 22
E 8016-B6
E CrMo 5 R 12
E 62 13 5CM
E Ti 5CrMo
d.o.o.
Cr and Mo-alloyed rutile electrode for welding creep resistant steels and steel castings for working
temperatures up to 600C and for steels, resistant to hydrogen pressure. Suitable for welding root beads in oil
plant; basic type of electrode recommended for filled weld.
Base materials:
Heat and H2 resistant steels:
DIN:
12CrMo9.15
W.Nr.:
1.7380
Heat treatment:
Coating type:
Welding current:
Chemical composition, wt %:
C
Si
Mn
0.10
0.50
0.80
Rutile
AC
DC -
Welding positions:
Cr
5.00
Mechanical properties:
ReL / Rp 0.2:
Yield strength
Redrying temperature:
120C / 1 h
Rm:
640 740
MPa(N/mm )
Elongation
A5:
> 17
Impact energy
KV :
> 47
J (+20C)
Welding parameters
Length
Current
mm
A
2.5
3.25
4
5
Tensile strength
mm
Approvals:
MPa(N/mm )
> 520
REF. E 330 - A / SP
Mo
0.50
300
350
450
450
70 90
115 145
145 190
200 240
Weight/
Packet
kg
4
4
5.4
5.4
Packing
Weight/
carton
kg
20
20
27
27
Weight/
1000 pcs
kg *
18.1
34.8
68.4
110
approximate data
Date:2004-06-28
F5
INOX B 13 Fe . G1
INOX B 13/1 Fe .. G2
INOX B 13/4 Fe .. G3
INOX B 13/6 Fe .. G4
INOX B 17 Fe . G5
INOX B 17 MoFe ... G6
Classification:
EN 1600:
E 13 B 43
DIN 8556 : E 13 MPB 30+130
AWS A-5.4: E 410-15
EN ISO 3581-A: E 13 B 43
W.Nr.:
1.4009
INOX B 13 Fe
d.o.o.
Basic flux alloyed electrode for welding similar corrosion resisting, martensitic-ferritic steels, steel castings
and for hardfacing exhaust valves.
Base materials:
Martensitic-ferritic steels
Corrosion resistant steels:
DIN
X 6 Cr 13
X 6 CrAl 13
X 10 Cr 13
X 15 Cr 13
G-X 10 Cr 13
W.Nr.:
1.4000
1.4002
1.4006
1.4024
1.4006
Heat treatment:
Preheating cca.150C, interpass temperature 180-260 C, tempering temperature depending on the relevant
base metal and material thickness.
Coating type:
Welding current:
Chemical composition, wt %:
C
0.07
Welding positions:
Mechanical properties:
Basic
DC +
Redrying temperature:
tempered*
2
Tensile strength
Rm:
>450 MPa(N/mm )
Elongation
A5:
> 20 %
Hardness:
420C / 2h
Cr
13
cca. 350 HB
as welded
mm
Approvals:
/
2.5
3.25
4
5
*
REF. E 503 - A / MS
Welding parameters
Length
Current
Mm
A
300
350
450
450
60 90
90 120
110 160
150 190
Weight/
Packet
kg
4
4.5
5.4
5.4
Packing
Weight/
carton
kg
16
18
27
27
Weight/
1000 pcs
kg *
17.9
37.6
73
106
approximate data
Date:2013-08-07
G1
Classification:
EN 1600:
E 13 B 43
DIN 8556 : E 13 1 MPB 30+130
A-5.4:
E 410-15
EN ISO 3581-A: E 13 B 43
W.Nr.:
1.4018
INOX B 13/1 Fe
d.o.o.
Basic flux alloyed electrode for welding similar corrosion resisting, martensitic-ferritic steels and steel castings
and for hardfacing.Suitable in constructions of hydroturbines, compressors and steam power plants. Resistant
to corrosion from water, steam and sea water atmosphere.
Base materials:
Martensitic-ferritic steels
Corrosion resistant steels:
DIN
X 6 Cr 13
X 6 CrAl 13
X 10 Cr 13
X 15 Cr 13
G-X 10 Cr 13
W.Nr.:
1.4000
1.4002
1.4006
1.4024
1.4006
Heat treatment:
Preheating temperature 150 - 200C, interpass temperature 180 - 400C, tempering temperature 650 750C,
depending on the relevant base metal and material thickness.
Coating type:
Welding current:
Chemical composition, wt %:
C
Cr
0.05
13
Welding positions:
Mechanical properties:
Basic
DC +
Yield strength
Redrying temperature:
420C / 2h
as welded
Ni
1.5
Mo
0.3
tempered*
MPa(N/mm ) >450
MPa(N/mm )
Elongation
A5:
>6
> 15
Impact energy
KV :
> 15
J(+20C)
> 47
%
J(+20C)
mm
Approvals:
/
2.5
3.25
4
5
*
Welding parameters
Length
Current
Mm
A
300
350
450
450
60 90
90 120
110 160
150 190
Weight/
Packet
kg
4
4.5
5.4
5.4
Packing
Weight/
carton
kg
20
18
27
27
Weight/
1000 pcs
kg *
17.9
37.6
73
106
approximate data
Date:2013-08-07
G2
Classification:
EN 1600:
DIN 8556 :
AWS A-5.4:
EN ISO 3581-A:
W.Nr.:
INOX B 13/4 Fe
d.o.o.
E 13 4 B 43
E 13.4 MPB 30+130
E 410 NiMo-15
E 13 4 B 43
1.4351
Basic flux alloyed electrode for welding similar corrosion resisting, martensitic-ferritic steels and steel castings
and for hardfacing. Suitable in constructions of hydroturbines, compressors and steam power plants.
Resistant to corrosion from water, steam and sea water atmosphere.
Base materials:
Martensitic-ferritic steels
Corrosion resistant steels:
Alloyed steel castings:
DIN
X 6 Cr 13
X 5 CrNi 13 4
X 20 Cr 13
G-X 5 CrNi 13 4
G-X 5 CrNi 13 6
G-X 5 CrNiMo 12 4
G-X 5 CrNiMo 13 4
W.Nr.:
1.4000
1.4313
1.4021
1.4313
1.4407
Heat treatment:
Preheating and interpass temperature 100 - 160C, tempering temperature 580 620C,
depending on the relevant base metal and material thickness.
Coating type:
Welding current:
Chemical composition, wt %:
C
Cr
0.06
13
Welding positions:
Mechanical properties:
Basic
DC +
Redrying temperature:
420C / 2h
Ni
4
Mo
0.5
as welded
2
>830 MPa(N/mm )
tempered*
2
>620 MPa(N/mm )
2
Elongation
A5:
>6
> 15
Impact energy
KV :
> 24
J(+20C)
> 47
J (+20C)
Hardness:
300-400
HB
250-350 HB
mm
Approvals:
/
2.5
3.25
4
5
*
REF. E 500- A / SP
Welding parameters
Length
Current
mm
A
300
350
450
450
60 90
90 120
110 160
150 190
Weight/
Packet
kg
4
4.4
5.4
5.4
Packing
Weight/
carton
kg
20
22
27
27
Weight/
1000 pcs
kg *
17.9
37.6
73
106
approximate data
Date:2013-08-07
G3
Classification:
INOX B 13/6 Fe
d.o.o.
Basic flux alloyed electrode for welding similar corrosion resisting, martensitic, martensitic-ferritic steels
and steel castings. Suitable in constructions of hydroturbines compressors and steam power plants. Resistant
to corrosion from water, steam and sea water atmosphere.
Base materials:
Martensitic-ferritic steels
Corrosion resistant steels:
Alloyed steel castings:
DIN
X 6 Cr 13
W.Nr.:
1.4000
G-X 5 CrNi 13 4
G-X 5 CrNi 13 6
1.4313
Heat treatment:
Preheating and interpass temperature 100 - 160C, tempering temperature 580 620C,
depending on the relevant base metal and material thickness.
Coating type:
Welding current:
Chemical composition, wt %:
C
Cr
0.07
13
Welding positions:
Mechanical properties:
Basic
DC +
Redrying temperature:
420C / 2h
0.2:
Ni
6
Mo
0.5
as welded
tempered*
2
> 740
MPa(N/mm2) >600
MPa(N/mm )
2
Elongation
A5:
>8
15
Impact energy
KV :
> 24
J (+20C)
> 47
J (+20C)
mm
Approvals:
/
2.5
3.25
4
5
*
REF. E 502- A / SP
Welding parameters
Length
Current
mm
A
300
350
450
450
60 90
90 120
110 160
150 190
Weight/
Packet
kg
4
4.4
5.4
5.4
Packing
Weight/
carton
kg
20
22
27
27
Weight/
1000 pcs
kg *
17.9
37.6
73
106
approximate data
Date:2013-08-07
G4
Classification:
d.o.o.
INOX B 17 Fe
EN 1600:
E 17 B 43
DIN 8556 : E 17 MPB 30+130
AWS A-5.4: E 430-15
EN ISO 3581-A: E 17 B 43
W.Nr.:
1.4015
Basic flux alloyed electrode for welding and building up 17%Cr-alloyed steel, where leakage and corrosion
resistance for working temperatures up to 450C is required. Suitable for hardfacing exhaust valves.
Base materials:
Ferritic-martensitic steels
DIN
Chemical corrosion resistant X 6 Cr 17
steels:
X 6 CrTi 17
X 6 CrNb 17
X 10 CrSi 18
X 10 CrAl 18
W.Nr.:
1.4016
1.4510
1.4511
1.4741
1.4742
Heat treatment:
Preheating and interpass temperature 200 300C, tempering temperature 650 - 750C,
depending on the relevant base metal and material thickness.
Coating type:
Welding current:
Chemical composition, wt %:
C
Cr
0.10
16.5
Welding positions:
Mechanical properties:
Basic
DC +
Redrying temperature:
Ni
0.5
Tempered: 750C/2h/furnace
2
> 440
MPa(N/mm )
Yield strength
ReL / Rp 0.2:
Tensile strength
Rm:
Hardness:
250 300 HB
cca. 200 HB
as welded
tempered
750C/2h/furnace
The hardness of the deposit depending on the relevant welding
conditions and the chemical compositions of the base metal.
420C / 2h
mm
Approvals:
/
2.5
3.25
4
5
*
Welding parameters
Length
Current
Mm
A
300
350
350/450
350/450
60 80
80 120
120 160
160 190
Weight/
Packet
kg
Packing
Weight/
carton
kg
Weight/
1000 pcs
kg *
3.4
4
4.5/5.2
4.5/5.2
17
20
18/26
18/26
19.8
40.8
76.5
123.8
approximate data
Date:2013-08-07
G5
Classification:
EN 1600:
E 17Mo 43
DIN 8556 :
E 17Mo
AWS A-5.4:
E 430 Mo-15
EN ISO 3581-A: E 17Mo 43
W.Nr.:
1.4115
INOX B 17 MoFe
d.o.o.
Basic flux alloyed electrode for welding and building up Cr-Mo-alloyed and non alloyed steels , where leakage
and corrosion resistance for working temperatures up to 550C is required. Suitable for hardfacing exhaust
valves. Sea water resistant, scaling resistant up to 900C
Base materials:
DIN
X 20 CrNi 17.2
W.Nr.:
1.4057
41 Cr 4
G-X 22 CrNi 17
GS-C 25
1.7035
1.4059
1.0619
Heat treatment:
Preheating and interpass temperature 100 200C (for joint welding operations 250 - 400C), depending on the
relevant base metal and material thickness.
Tempering temperature 650 - 750C to improve the toughness values in the weld metal and in the transition zone.
Coating type:
Welding current:
Chemical composition, wt %:
C
Cr
0.15
16.5
Basic
DC +
Ni
0.5
Mo
1.1
Welding positions:
Mechanical properties:
Hardness:
as welded
tempered
700C/2h/furnace
The hardness of the deposit depending on the relevant welding
conditions and the chemical composition of the base metal.
Redrying temperature:
420C / 2h
mm
Approvals:
/
2.5
3.25
4
5
*
REF. E 511 - A / MS
Welding parameters
Length
Current
Mm
A
300
350
350/450
350/450
60 80
80 120
120 160
160 200
Weight/
Packet
kg
Packing
Weight/
carton
kg
Weight/
1000 pcs
kg *
3.4
4.5
4.5/5.2
4.5/5.2
17
18
18/26
18/26
18.1
40.4
76.5
123.8
approximate data
Date:2013-08-07
G6
Notes:
INOX R 19/9 Nb H1
INOX B 19/9 Nb H2
INOX R 19/9 NC H3
INOX R 19/12/3 Nb .. H4
INOX B 19/12/3 Nb .. H5
INOX R 19/12/3 NC . H6
INOX R 19/13/4 L . H7
INOX R 22/9/3 LN . H8
INOX R 20/10/3 L .... H9
INOX R 20/25 L . H10
INOX B 20/25 L . H11
Classification:
EN 1600:
DIN 8556 :
AWS A-5.4:
ISO 3581-A:
W.Nr.::
E 19 9 Nb R 12
E 19.9 Nb R 26
E 347-17
E 19 9 Nb R 12
1.4551
INOX R 19/9 Nb
d.o.o.
Rutile, Nb-stabilised electrode for welding nonstabilised and stabilised stainless steels. Resistant to
intergranular corrosion up to 400C, resistant to oxidation up to 800C and high hot cracking resistance of the
weld metal.
Base materials:
Chemical corr.resistant steel:
DIN:
X 5 CrNi 18 10
X 6 CrNiTi 18 10
X 6 CrNiNb 18 10
W.Nr.:
1.4301
1.4541
1.4550
AISI/ASTM:
304
321
347
G-X 6CrNi 18 9
G-X 5 CrNiNb 18.9
G-X 10 CrNi 18 8
1.4308
1.4552
1.4312
A157
Coating type:
Welding current:
Chemical composition, wt %:
C
Si
Mn
0.04
1.0
0.7
Rutile
AC
DC +
Welding positions:
Cr
19
Nb
> 8 x %C
Mechanical properties:
Redrying temperature:
300C / 2h
ReL / Rp 0.2:
> 390
Tensile strength
Rm:
Elongation
A5:
> 30 %
Impact energy
KV :
Approvals:
mm
BV:
UP
DNV: 347
TV
CR
S
2
2.5
3.25
4
5
Welding parameters
Length
Current
mm
A
250/300
300
350
350
350
30 50
50 85
70 125
110 165
165 - 230
MPa(N/mm )
2
Yield strength
Ferrite content: FN 6
REF. E 543 - A / MS
Ni
10
Weight/
packet
kg
3.5/3.4
3.8
4.5
4.5
4.5
Packing
Weight/
carton
kg
14/13.6
15.2
18
18
18
Weight/
1000 pcs
kg *
18.1
35.4
53.6
81.8
approximate data
Date:2013-08-07
H1
Classification:
EN 1600:
E 19 9 Nb B 22
DIN 8556 :
E 19.9 Nb B 20+
AWS A-5.4:
E 347-15
EN ISO 3581-A: E 19 9 Nb B 22
W.Nr.:
1.4551
INOX B 19/9 Nb
d.o.o.
Basic, Nb-stabilised electrode for welding nonstabilised and stabilised stainless steels. Resistant to
intergranular corrosion up to 400C. High ductility and high cracking resistance of the weld metal.
Base materials:
Chemical corr.resistant steel:
DIN:
X 5 CrNi 18 10
X 6 CrNiTi 18 10
X 6 CrNiNb 18 10
W.Nr.:
1.4301
1.4541
1.4550
AISI/ASTM:
304
321
347
G-X 6CrNi 18 9
G-X 5 CrNiNb 18.9
G-X 10 CrNi 18 8
1.4308
1.4552
1.4312
A157
Coating type:
Welding current:
Chemical composition, wt %:
C
Si
Mn
0.06
0.40
1.8
Basic
DC +
Cr
19
Ni
10
Nb
> 8 x %C
Welding positions:
Mechanical properties:
Redrying temperature:
300C / 2h
Ferrite content: FN 8
ReL / Rp 0.2:
> 390
Tensile strength
Rm:
Elongation
A5:
> 30 %
Impact energy
KV :
mm
2
2.5
3.25
4
5
REF. E 545 - A / M
Welding parameters
Length
Current
mm
A
250
300
350
350
350
40 60
50 80
80 110
110 140
140 - 180
MPa(N/mm )
2
Yield strength
Weight/
packet
kg
3.5
4
4.5
4.5
4.5
Packing
Weight/
carton
kg
14
16
18
18
18
Weight/
1000 pcs
kg *
16
30
approximate data
Date:2013-08-07
H2
Classification:
EN 1600:
DIN 8556 :
AWS A-5.4:
EN ISO 3581-A:
W.Nr.:
E 19 9 LR 12
E 19.9 LR 26
E 308L-17
E 19 9 LR 12
1.4316
INOX R 19/9 NC
d.o.o.
Austenitic rutile, low carbon electrode for welding nonstabilised and stabilised stainless steels. Resistant to
intergranular corrosion up to 350C, resistant to oxidation up to 800C and good low-temperature ductility down to
temperature 196C.
Base materials:
Chemical corr.resistant steel:
DIN:
X 5 CrNi 18 10
X 2 CrNi 19 11
X 6 CrNiTi 18 10
X 6 CrNiNb 18 10
W.Nr.:
1.4301
1.4306
1.4541
1.4550
AISI/ASTM:
304
304 L
321
347
G-X 6CrNi 18 9
G-X 5 CrNiNb 18.9
1.4308
1.4552
Coating type:
Rutile
Chemical composition, wt %:
Welding current:
C
0.03
AC
DC +
Si
0.8
Mn
0.7
Cr
19
Ni
10
Welding positions:
Mechanical properties:
Redrying temperature:
300C / 2h
Ferrite content: FN 5
ReL / Rp 0.2:
> 340
Tensile strength
Rm:
Elongation
A5:
> 35
Impact energy
KV :
mm
BV:
DNV:
RS:
TV
DB
CR
S
2
2.5
3.25
4
5
UP
308L
308L
REF. E 553 - A / MS
Welding parameters
Length
Current
mm
A
250/300
300
350
350
350
30 50
50 85
70 125
110 165
165 - 230
MPa(N/mm )
2
Yield strength
Weight/
packet
kg
3.5/3.8
3.8
4.5
4.5
4.5
Packing
Weight/
carton
kg
14/15.2
15.2
18
18
18
Weight/
1000 pcs
kg *
18.1
35.4
53.6
81.8
approximate data
Date:2013-08-07
H3
Classification:
EN 1600:
E 19 12 3 Nb R 12
DIN 8556 :
E 19.12.3 Nb R 26
AWS A-5.4:
E 318-17
EN ISO 3581-A:E 19 12 3 Nb R 12
W.Nr.:
1.4576
INOX R 19/12/3 Nb
d.o.o.
Austenitc rutile, Nb-stabilised electrode for welding nonstabilised and stabilised stainless steels.
Resistant to intergranular corrosion up to 400C, resistant to oxidation up to 800C and good hot cracking
resistance of the weld metal.
Base materials:
Chemical corr.resistant steel:
DIN:
X 5 CrNiMo 17 12 2
X 5 CrNiMo 17 13 3
X 6 CrNiMoTi 17 12 2
X 6 CrNiMoNb 17 12 2
X 10 CrNiMoTi 18 12
X 10 CrNiMoNb 18 12
G-X 6CrNiMo 18 10
G-X 5 CrNiMoNb 18.10
W.Nr.:
1.4401
1.4436
1.4571
1.4581
1.4573
1.4583
1.4408
1.4581
AISI/ASTM:
316
316
316Ti
316Cb
316Ti
316Cb
A157
316L
Coating type:
Welding current:
Chemical composition, wt %:
C
Si
Mn
Cr
0.04
1.0
0.7
18.5
Rutile
AC
DC +
Welding positions:
Ni
11.5
Mo
2.7
Nb
> 8 x %C
Mechanical properties:
ReL / Rp 0.2:
Yield strength
Redrying temperature:
300C / 2h
> 400
MPa(N/mm )
2
Tensile strength
Rm:
Elongation
A5:
> 30
Impact energy
Av :
Ferrite content: FN 10
Welding and packing data:
mm
Approvals:
2
2.5
3.25
4
5
*
REF. E 573 - A / SP
Welding parameters
Length
Current
mm
A
250
300
350
350
350
30 50
50 85
70 125
110 165
165 - 230
Weight/
Packet
Kg
3.5
4
4.5
4.5
4.5
Packing
Weight/
carton
kg
14
16
18
18
18
Weight/
1000 pcs
kg *
18.1
35.4
53.6
81.8
approximate data
Date:2013-08-07
H4
Classification:
EN 1600:
E 19 12 3 Nb B 22
DIN 8556 :
E 19.12.3 Nb B20+
AWS A-5.4:
E 318-15
EN ISO 3581-A: E 19 12 3 Nb B 22
W.Nr.:
1.4576
INOX B 19/12/3 Nb
d.o.o.
Austenitc basic, Nb-stabilised electrode for welding nonstabilised and stabilised stainless steels.
Resistant to intergranular corrosion up to 400C, resistant to oxidation up to 800C and good hot cracking
resistance of the weld metal.
Base materials:
Chemical corr.resistant steel:
DIN:
X 5 CrNiMo 17 12 2
X 5 CrNiMo 17 13 3
X 6 CrNiMoTi 17 12 2
X 6 CrNiMoNb 17 12 2
X 10 CrNiMoTi 18 12
X 10 CrNiMoNb 18 12
G-X 6CrNiMo 18 10
G-X 5 CrNiMoNb 18.10
W.Nr.:
1.4401
1.4436
1.4571
1.4581
1.4573
1.4583
1.4408
1.4581
AISI/ASTM:
316
316
316Ti
316Cb
316Ti
316Cb
A157
316L
Coating type:
Welding current:
Chemical composition, wt %:
C
Si
Mn
Cr
0.04
0,6
1
19
Basic
DC +
Ni
11
Mo
2,7
Nb
> 8 x %C
Welding positions:
Mechanical properties:
Redrying temperature:
300C / 2h
Ferrite content: FN 9
ReL / Rp 0.2:
> 400
Tensile strength
Rm:
Elongation
A5:
> 30 %
Impact energy
Av :
mm
2
2.5
3.25
4
5
REF. E 573 - A / MS
Welding parameters
Length
Current
mm
A
250/300
300
350
350
350
40 60
50 80
80 110
110 140
140 - 180
MPa(N/mm )
2
Yield strength
Weight/
Packet
Kg
3.5/3.4
4
4.5
4.5
4.5
Packing
Weight/
carton
kg
14/13.6
16
18
18
18
Weight/
1000 pcs
kg *
18.1
35.4
53.6
81.8
approximate data
Date:2013-08-07
H5
Classification:
EN 1600:
E 19 12 3 LR 12
DIN 8556 :
E 19.12.3 LR 26
AWS A-5.4:
E 316L-17
EN ISO 3581-A:
E 19 12 3 LR
W.Nr.:
1.4430
INOX R 19/12/3 NC
d.o.o.
Austenitic rutile, low carbon electrode for welding nonstabilised and stabilised stainless steels. Resistant to
intergranular corrosion up to 350C, resistant to oxidation up to 800C and good low-temperature ductility down to
temperature 120C.
Base materials:
Chemical corr.resistant steel:
DIN:
X 2 CrNiMo 17 13 2
X 5 CrNiMo 17 12 2
X 5 CrNiMo 17 13 3
X 6 CrNiMoTi 17 12 2
X 6 CrNiMoNb 17 12 2
X 10 CrNiMoTi 18 12
X 10 CrNiMoNb 18 12
G-X 6 CrNiMo 18 10
G-X 5 CrNiMoNb 18.10
Coating type:
W.Nr.:
1.4404
1.4401
1.4436
1.4571
1.4580
1.4573
1.4583
1.4408
1.4581
AISI/ASTM:
316L
316
316
316Ti
316 Cb
316Ti
316Cb
Rutile
Chemical composition, wt %:
Welding current:
C
0.03
AC
DC +
Si
0.8
Mn
0.7
Cr
18.5
Ni
11.5
Mo
2.7
Welding positions:
Mechanical properties:
Redrying temperature:
300C / 2h
Ferrite content: FN 8
ReL / Rp 0.2:
> 380
Tensile strength
Rm:
Elongation
A5:
> 30 %
Impact energy
KV :
mm
ABS:
DNV:
BV:
TV
DB
S
316L-17
316L
316L
1.6
2
2.5
3.25
4
5
*
REF. E 584 - A / MS
Welding parameters
Length
Current
mm
A
250
250/300
300
350
350
350
30 50
50 85
70 125
110 165
165 - 230
MPa(N/mm )
2
Yield strength
Weight/
packet
kg
3.3
3.5/4
4
4.5
4.5
4.5
Packing
Weight/
carton
kg
13.2
14/16
16
18
18
18
Weight/
1000 pcs
kg *
/12
18.1
35.4
53.6
81.8
approximate data
Date:2013-08-07
H6
Classification:
EN 1600:
E 19 13 4 LR 12
DIN 8556:
E 19.13.4 LR 23
AWS A 5.4:
E 317L -17
EN ISO 3581-A:E 19 13 4 LR 12
W.Nr.:
1.4453
INOX R 19/13/4 L
d.o.o.
Rutile low carbon electrode for welding corrosion resisting steels with higher Mo content. Electrode has very
good welding properties, weld metal has excellent corrosion resistance.
Base materials:
X5 CrNiMo 17 13
X2 CrNiMoN 17 13 5
X2 CrNiMoN 17 13 3
X10CrNiMoNb 18 12
X4 CrNiMoN 22 15
X4 CrNiMoN 19 16 5
W.-Nr.
1.4449
1.4439
1.4429
1.4583
1.3951
1.3964
Heat treatment:
Preheating and post weld heat treatment is not required by the weld metal.
Interpass temperatures shall not exceed 150C.
Coating type:
Welding current:
Chemical composition, wt %:
C
Si
Mn
Cr
0.03 <0.8
0.8
18
Welding positions:
Mechanical properties:
Rutile
AC
DC +
Redrying temperature:
250C /2h
Ni
14.5
> 450
MPa(N/mm )
Tensile strength
Rm:
> 600
MPa(N/mm )
Elongation
A5:
28
Impact energy
KV :
mm
REF. E 580 - A / M
ReL / Rp 0.2:
> 50
> 40
2
2.5
3.25
4
5
N
+
Yield strength
Ferrite content: FN 0
Approvals:
Mo
4.0
Welding parameters
Length
Current
mm
A
250
300
350
350
350
30-50
50-85
70-125
110-165
160-230
Weight/
packet
kg
3
3.5
4
4.5
4.5
J ( +20 C)
J ( -140 C)
Packing
Weight/
carton
kg
12
14
16
18
18
Weight/
1000 pcs
kg *
11.2
18.9
35
56.8
82.3
approximate data
Date:2013-08-07
H7
Classification:
EN 1600: E 22 9 32 NL R32
AWS A 5.4: E 2209 L -17
EN ISO 3581-A: E 22 9 32 NL R32
W.Nr.:
1.4462
d.o.o.
INOX R 22/9/3 LN
Rutile-basic coated electrode for the welding ferritic-austenitic duplex steels. Mainly used in off-shore
engineering and in the chemical industry. The weld metal has excellent resistance to stress corrosion cracking
due to its high ferritic content and good resistance to pitting.
Base materials:
Ferritic-austenitic duplex steels:
W.Nr.: 1.4462 ( X 2 CrNiMoN 22 5)
1.4462 with 1.4583 ( X 10 CrNiMoNb 18 12
1.4462 with HI/HII, StE 255, 17 Mn 4, StE 355, 15 Mo 3
Coating type:
Welding current:
Chemical composition, wt %:
C
Si
Mn
Cr
0.03
0.9
0.8
23
Rutile-basic
AC
DC +/-
Welding positions:
Ni
9
N
0.17
Mechanical properties:
Redrying temperature:
300C /2h
Ferrite content: FN 35
ReL / Rp 0.2:
> 540
Tensile strength
Rm:
Elongation
A5:
> 22
Impact energy
KV :
> 47 J
( +20 C)
mm
Approvals:
2.5
3.25
4
5
Yield strength
Welding parameters
Length
Current
mm
A
250/300
350
350
350
50-85
70-125
110-165
160-230
MPa(N/mm )
2
REF. E 582 - A / MS
Mo
3.2
Weight/
packet
kg
3.5/4
4.5
4.5
4.5
Packing
Weight/
carton
kg
14/16
18
18
18
Weight/
1000 pcs
kg *
18.9
35
56.8
82.3
approximate data
Date:2013-08-07
H8
Classification:
EN 1600:
E 20 10 3 R 12
DIN 8556:
E 20 10 3 LR 23
AWS A 5.4: E 308MoL -17
EN ISO 3581-A: E 20 10 3 R12
W. Nr.:
1.4431
d.o.o.
INOX R 20/10/3L
Rutile low carbon electrode for welding mild and low alloyed steels to stainless or austenitic manganese steels,
it is also suitable for stainless cladding. Weld material has corrosion resistance to acids and salt water
Base materials:
Heat treatment:
Coating type:
Welding current:
Chemical composition, wt %:
C
Si
Mn
0.03
<0.9
0.8
Welding positions:
Mechanical properties:
Rutile
AC
DC +
ReL / Rp 0.2:
Yield strength
Redrying temperature:
250C /2h
Cr
20
> 400
Tensile strength
Rm:
> 620
Elongation
A5:
> 25
Impact energy
KV :
> 55
mm
2
2.5
3.25
4
5
Approvals:
REF. E 583-A / M
Welding parameters
Length
Current
mm
A
250
300
350
350
350
30-50
50-85
70-125
110-165
160-230
Weight/
Packet
kg
3
3.5
4
4.5
4.5
Ni
10
Mo
2.8
MPa(N/mm )
2
MPa(N/mm )
%
J ( +20 C)
Packing
Weight/
carton
kg
12
14
16
18
18
Weight/
1000 pcs
kg *
11.2
18.9
35
56.8
82.3
approximate data
Date:2013-08-07
H9
Classification:
EN 1600: E 20 25 5 Cu NL R 32
DIN 8556: E 20 25 5 L Cu R
AWS A 5.4: E 385 -17
EN ISO 3581-A: E 20 25 5 Cu NL R 32
W.Nr.: 1.4549
d.o.o.
INOX R 20/25 L
Rutile electrode for welding austenitic steels. The weld metal has very low carbon content and copper addition.
Electrode has very good welding properties, weld metal has excellent corrosion resistance toward acids and
good pitting resistance in neutral chloride solutions.
Base materials:
X 1 NiCrMoCu 25 20
W.- Nr. 1.4539
G-X 7 NiCrMoCuNb 25 20
1.4500
X 4 NiCrMoCuNb 20 18 2
1.4505
X 5 NiCrMoCuTi 20 18
1.4506
G-X 2 NiCrMoCuN 25 20
1.4536
X 2 Cr Ni Mo Cu 25 20 6
1.4529
Coating type:
Welding current:
Chemical composition, wt %:
C
Si
Mn
Cr
0.03
0.9
1.5
20.5
Welding positions:
Mechanical properties:
Rutile
AC
DC +
Redrying temperature:
250C /2h
Ferrite content: FN 0
Ni
25
REF. E637 - S / SM
N
+
ReL / Rp 0.2:
> 400
Tensile strength
Rm:
Elongation
A5:
> 25
Impact energy
KV :
mm
2
2.5
3.25
4
5
Mo
4.5
Yield strength
Welding parameters
Length
Current
mm
A
300
300
350
350
350
30-50
50-85
70-125
110-165
160-230
MPa(N/mm )
2
65
50
Approvals:
Cu
1.5
Weight/
packet
kg
3
4
4
4.5
4.5
%
J ( +20 C)
J ( -140 C)
Packing
Weight/
carton
kg
12
16
16
18
18
Weight/
1000 pcs
kg *
11.2
19
35
56
82.3
approximate data
Date:2012-01-09
H10
Classification:
EN 1600: E 20 25 5 Cu NLB 23
DIN 8556: E 20 25 5 L Cu B
AWS A 5.4: E 385 -15
EN ISO 3581-A: E 20 25 5 Cu
NLB 23
d.o.o.
INOX B 20/25 L
W.Nr.:
1.4539
Basic electrode for welding austenitic steels. The weld metal has low carbon content and copper and nitrogen
addition. Weld metal has excellent corrosion resistance toward acids and good pitting resistance in neutral
chloride solutions.
Base materials:
X 1 NiCrMoCu 25 20
W.- Nr. 1.4539
G-X 7 NiCrMoCuNb 25 20
1.4500
X 4 NiCrMoCuNb 20 18 2
1.4505
X 5 NiCrMoCuTi 20 18
1.4506
G-X 2 NiCrMoCuN 25 20
1.4536
X 2 Cr Ni Mo Cu 25 20 6
1.4529
Coating type:
Welding current:
Chemical composition, wt %:
C
Si
Mn
Cr
0.04
0.7
2
20
Welding positions:
Mechanical properties:
Basic
DC +
Redrying temperature:
250C /2h
Ferrite content: FN 0
Ni
25
Yield strength
Rp 0.2 %:
Tensile strength
Rm:
> 380
Elongation
A5:
> 30
Impact energy
Av :
> 47
> 47
>47
Cu
1.6
Approvals:
2
2.5
3.25
4
5
REF. E 638 - A/ SM
Welding parameters
Length
Current
mm
A
300
300
350
350
350
30-50
50-85
70-125
110-165
160-230
N
0.1
(typ100)J (+20 C)
(typ 70) J (-40 C)
(typ 60) J(-140C)
mm
Mo
5
Weight/
packet
kg
Packing
Weight/
carton
kg
Weight/
1000 pcs
kg *
approximate data
Date:4.9.2013
H 11
INOX R 25/4 Fe .. I1
INOX R 25/14 NC ... I2
INOX R 25/14/3 NC I3
INOX R 25/20 .. I4
INOX B 25/20 .. I5
Classification:
EN 1600:
E 25 4 R 43
DIN 8556 :
E 25.4 MPR 33 160
EN ISO 3581-A:E 25 4 R 43
W.Nr.:
1.4820
INOX R 25/4 Fe
d.o.o.
Rutile ferritic-austenitic flux-alloyed electrode for welding heat and corrosion resistant stainless steels up to
1100 C. Resistant to S-content atmosphere. Preheating and interpass temperatures 200 - 400C, depending
on the relevant base metal and material thickness.
Base materials:
DIN:
X 20 CrNiSi 25.4
X 10CrAl7
X 10CrAl13
X 10CrAl18
X 10CrAl24
G-X30CrSi6
G-X40CrSi17
G-X40CrNiSi27.4
W.Nr.:
1.4821
1.4713
1.4724
1.4742
1.4762
1.4710
1.4740
1.4823
AISI/ASTM:
327
405
442/446
A 297 HC
Coating type:
Welding current:
Chemical composition, wt %:
C
Si
Mn
0.10
0.8
1.0
Rutile
AC
DC +
Welding positions:
Cr
25
Mechanical properties:
ReL / Rp 0.2:
Yield strength
Redrying temperature:
300C / 2h
Rm:
650 750
MPa(N/mm )
Elongation
A5:
> 15
2.5
3.25
4
Tensile strength
mm
Approvals:
MPa(N/mm )
> 490
REF. E 625 - A / M
Ni
5
Welding parameters
Length
Current
mm
A
300
350
450
70-110
110-160
150-200
Weight/
packet
kg
4
4.5
5
Packing
Weight/
carton
kg
16
18
25
Weight/
1000 pcs
kg *
20.4
40
75
approximate data
Date:2013-08-07
I1
Classification:
EN 1600:
E 23 12 LR 32
DIN 8556 :
E 23.12 LR 26
AWS A-5.4:
E 309L-17
EN ISO 3581-A: E 23 12 LR 32
W.Nr.:
1.4332
d.o.o.
INOX R 25/14 NC
Rutile, low carbon electrode for welding analogous, heat resistant steels and steel castings. Scaling resistant up to
1000C. Suitable for joining dissimilar steels (unalloyed steels with stainless steels), welding steam boiler
construction, hardening plants, the crude oil industry and the ceramics industry.
Base materials:
W.Nr.:
1.4828
1.4833
1.4713
1.4724
1.4742
1.4710
1.4740
1.4826
AISI/ASTM:
309
405
-
Heat treatment:
Coating type:
Rutile
Chemical composition, wt %:
Welding current:
C
0.04
AC
DC +
Si
0.9
Mn
0.7
Cr
23
Ni
13
Welding positions:
Mechanical properties:
Redrying temperature:
300C / 2h
Ferrite content: FN 15
ReL / Rp 0.2:
> 400
Tensile strength
Rm:
Elongation
A5:
> 30 %
Impact energy
KV :
> 47 J (+20C)
mm
2
2.5
3.25
4
5
REF. E 642 - A / SM
Welding parameters
Length
Current
mm
A
250
300
350
350
350
40 55
40 80
70 100
110 160
160 - 230
MPa(N/mm )
2
Yield strength
Weight/
packet
kg
3.5
4
4.5
4.5
4.5
Packing
Weight/
carton
kg
14
16
18
18
18
Weight/
1000 pcs
kg *
17.7
35.7
54.9
84.9
approximate data
Date:2013-08-09
I2
Classification:
EN 1600:
DIN 8556 :
AWS A-5.4:
EN ISO 3581-A:
W.Nr.:
d.o.o.
E 23 12 2 LR 32
E 23.13.2 LR 26
E 309MoL-17
E 23 12 2 LR 32
1.4459
INOX R 25/14/3 NC
Austenitic-ferritic rutile, low carbon electrode for welding corrosion and heat resistant stainless steels and steel
castings up to 1150C. Suitable for joining dissimilar steels.
Base materials:
- High-strength, unalloyed and alloyed constructional steels and heat treatable steels among themselves or among
each other.
- Unalloyed and alloyed boiler steels or constructional steels with highly alloyed chromium, CrNi and CrNiMo steels.
- Combination between ferritic and austenitic steels for steam boiler and pressure vessel constructions.
- Weld claddings: for the first layer of corrosion resistant weld claddings on HI, HII,StE 255, 17Mn4, StE 355-StE500
- For the first layer of corrosion resistant weld claddings on high.temperature, heat treated, fine-grained
constructional steels.
Coating type:
Rutile
Chemical composition, wt %:
Welding current:
C
0.04
AC
DC +
Si
0.8
Mn
0.6
Cr
23
Ni
13
Mo
3
Welding positions:
Mechanical properties:
Yield strength
Redrying temperature:
300C / 2h
Ferrite content: FN 20
ReL / Rp 0.2:
> 490
Tensile strength
Rm:
Elongation
A5:
> 25
Impact energy
KV :
> 47
J (+20C)
mm
Approvals:
BV:
DNV:
TV
DB
S
CR
2
2.5
3.25
4
5
UP
309 Mo
REF. E 641 - A / SM
MPa(N/mm )
Welding parameters
Length
Current
mm
A
250/300
300
350
350
350
40 55
40 80
70 100
110 160
160 - 230
Weight/
packet
kg
3.5/4
4
4.5
4.5
4.5
Packing
Weight/
carton
kg
14/13.6
16
18
18
18
Weight/
1000 pcs
kg *
17.7
35.7
54.9
84.9
approximate data
Date:2013-08-07
I3
Classification:
EN 1600:
E 25 20 R 32
AWS A-5.4:
E 310-16
EN ISO 3581-A: E 25 20 R 32
W.Nr.:
1.4842
d.o.o.
INOX R 25/20
Rutile coated, austenitic electrode for welding 309 and 310-type stainless steels. Scaling resistant up to 1200C.
Base materials:
W.Nr.:
1.4841
1.4845
1.4828
1.4713, 1.4724
1.4742, 1.4762
1.4710, 1.4740
1.4741
1.4837
1.4826
AISI/ASTM:
310/314
310S
309
405
442/446
A 297 HF
Heat treatment:
Preheating and interpass temperatures for ferritic steels 200 - 300C, depending on the relevant base metal
and material thickness. The temperature range between 650 and 900C should be avoided owing to the risk of
embrittlement. Thick-walled weldments to be carried out by means of the basic electrode INOX B 25/20.
Coating type:
Welding current:
Chemical composition, wt %:
C
Si
Mn
Cr
Ni
0.11
25
20
Rutile
AC
DC +
Welding positions:
0.5
Mechanical properties:
Redrying temperature:
300C / 2h
Ferrite content: FN 0
ReL / Rp 0.2:
> 300
Tensile strength
Rm:
Elongation
A5:
> 30
Impact energy
KV :
> 50 J
(+20C)
mm
2
2.5
3.25
4
5
*
REF. E 635- A / SM
Welding parameters
Length
Current
mm
A
300
300
350
350
350
35 50
65 80
90 120
115 150
160 210
MPa(N/mm )
2
Yield strength
Weight/
packet
kg
4
4
4.5
4.5
4.5
Packing
Weight/
carton
kg
16
16
18
18
18
Weight/
1000 pcs
kg *
17.1
34.6
51.7
approximate data
Date:2013-08-08
I4
Classification:
d.o.o.
INOX B 25/20
EN 1600:
E 25 20 B 42
DIN 8556 :
E 25 20 B 20+
AWS A-5.4:
E 310-15
EN ISO 3581-A: E 25 20 B 42
W.Nr.:
1.4842
Basic coated, austenitic electrode for welding 309 and 310-type stainless steels. Scaling resistant up to
1200C. Cryogenic resistance down to -196C.
Base materials:
W.Nr.:
1.4841
1.4845
1.4828
1.4713, 1.4724
1.4742, 1.4762
1.4710, 1.4740
1.4741
1.4837
1.4826
AISI/ASTM:
310/314
310S
309
-, 405
-, 442/446
A 297 HF
Heat treatment:
Preheating and interpass temperatures for ferritic steels 200 - 300C, depending on the relevant base metal
and material thickness. The temperature range between 650 and 900C should be avoided owing to the risk of
embrittlement.
Coating type:
Welding current:
Chemical composition, wt %:
C
Si
Mn
0.10
0.2
2
Basic
DC +
Cr
25
Ni
20
Welding positions:
Mechanical properties:
ReL / Rp 0.2:
Yield strength
Redrying temperature:
300C / 2h
Ferrite content: FN 0
Tensile strength
Rm:
Elongation
A5:
> 30
Impact energy
Av :
> 70 J
(+20C)
mm
Approvals:
2
2.5
3.25
4
5
*
REF. E 630- A / SP
MPa(N/mm )
> 300
Welding parameters
Length
Current
mm
A
300
300
350
350
350
35 45
65 80
90 120
115 150
160 210
Weight/
packet
kg
4
4
4.5
4.5
4.5
Packing
Weight/
carton
kg
16
16
18
18
18
Weight/
1000 pcs
kg *
11.8
16.8
33.3
50.0
83.3
approximate data
Date:2013-08-08
I5
ELECTRODES
INOX R 22/12/3 Fe . J1
INOX B 18/8/6 . J2
INOX R 18/8/6 Fe ... J3
INOX R 18/8/6 ............................ J4
INOX R 29/9 J5
INOX R 29/9 Fe J6
INOX B 70/15 . J7
Classification:
EN 1600:
DIN 8556 :
AWS A-5.4:
EN ISO 3581-A:
d.o.o.
E 23 12 2 R 53
E 309 Mo-16
E 23 12 2 R 53
INOX R 22/12/3 Fe
Austenitic-ferritic rutile flux-alloyed electrode for joint welding corrosion and heat resistant steels and steel castings.
Suitable for joining dissimilar steels, also as a buffer layer on stainless clads on unalloyed steels.
Base materials:
Coating type:
Rutile
Welding current:
AC
DC +
W.Nr.:
1.4828
1.4713
1.4724
1.4742
1.4826
1.4710
1.4740
AISI/ASTM:
309
405
Si
Mn
Cr
Ni
0.05
0.8
0.8
23
13
Mo
2,8
Welding positions:
Mechanical properties:
Redrying temperature:
300C / 2h
Yield strength
ReL / Rp 0.2:
Tensile strength
Rm:
Elongation
A5:
> 25
Impact energy
KV :
> 40 J
(+20C)
> 400
MPa(N/mm )
2
Ferrite content: FN 25
Welding and packing data:
Approvals:
DNV : 309Mo
ABS: 309Mo-16
BV: 309Mo
S
mm
Welding parameters
Length
Current
mm
A
1.6
250
2
300
2.5
300
3.25
350
4
450
4
350
5
450
* approximate data
Date:2013-08-07
40 55
55 80
70 110
110 165
150 225
150 225
190 - 290
Weight/
Packet
kg
3.3
3.5
3.5
4
5.2
4.5
5.2
Packing
Weight/
carton
kg
13.2
14
14
16
26
18
26
Weight/
1000 pcs
kg *
8.6
16
26
50.6
96.3
162.5
J1
Classification:
EN 1600:
DIN 8556 :
AWS A-5.4:
EN ISO 3581-A:
W.Nr.:
d.o.o.
E 18 8 Mn B 22
E 18 8 Mn B 20+
E 307-15
E 18 8 Mn B 22
1.4370
INOX B 18/8/6
Basic coated, austenitic electrode for welding low and high alloyed steels. Scaling resistant up to 800C and
low-temperature toughness down to -100C. Preheating and postweld heat treatment as required by the base
metal.
Base materials:
-
Coating type:
Welding current:
Chemical composition, wt %:
C
Si
Mn
0.12
0.8
7
Basic
DC +
Cr
19
Ni
9
Welding positions:
Mechanical properties:
ReL / Rp 0.2:
Yield strength
Redrying temperature:
300C / 2h
Ferrite content: 0
Rm:
MPa(N/mm )
A5:
> 40
Impact energy
KV :
> 80 J
2
2.5
3.25
4
5
*
REF. E 670- A / MS
Tensile strength
mm
MPa(N/mm )
Elongation
> 350
Welding parameters
Length
Current
mm
A
250
300
350
350
450
45 65
65 70
90 120
115 150
160 210
Weight/
Packet
kg
3.5
3.4
4.5
4.5
6
(+20C)
Packing
Weight/
carton
kg
14
16
18
18
30
Weight/
1000 pcs
kg *
15.7
29.3
43.3
68.7
approximate data
Date:2013-08-07
J2
Classification:
EN 1600:
E 18 8 Mn R 53
DIN 8556 :
E 18 8 Mn MPR 33 160
AWS A-5.4:
E 307-16
EN ISO 3581-A:E 18 8 Mn R 53
W. Nr.:
1.4370
d.o.o.
INOX R 18/8/6 Fe
Austenitic rutile, flux-alloyed, high-efficiency electrode for joining dissimilar steels, for welding corrosion resistant
steels and steels that are not readily weldable. This electrode yields tough between-layers in hardsurfacing
operations. The weld metal has strain hardenability, cracking resistance, cavitation resistance, thermal shock
resistance, scaling resistance up to 800C and low temperature toughness down to -100C.
Base materials:
Heat treatment:
Coating type:
Rutile
Chemical composition, wt %:
Welding current:
C
0.08
AC
DC +
Si
< 1.2
Mn
7
Cr
19
Ni
9
Welding positions:
Mechanical properties:
Redrying temperature:
300C / 2h
ReL / Rp 0.2:
> 350
Tensile strength
Rm:
Elongation
A5:
> 30
Impact energy
KV :
> 50 J
> 32 J
(+20C)
(-10C)
Ferrite content: 0
mm
TV
DB
2
2.5
3.25
4
5
*
REF. E 675 - A / MS
Welding parameters
Length
Current
mm
A
250/300
250/300
350
350/450
350/450
55 80
70 110
110 165
150 200
190 - 290
MPa(N/mm )
2
Yield strength
Weight/
Packet
kg
Packing
Weight/
Carton
kg
3.5 / 4
3.5 / 4
4.5
4.5/5
4.5/5
14 / 16
14 / 16
18
18/25
18/25
Weight/
1000 pcs
kg *
20.7/24.2
49.5
71.4
115.4
approximate data
Date:2013-08-07
J3
Classification:
EN 1600:
E 18 8 Mn R 12
DIN 8556 :
E 18 8 Mn R 26
AWS A-5.4:
E 307-17
EN ISO 3581-A: E 18 8 Mn R 12
W.Nr.:
1.4370
d.o.o.
INOX R 18/8/6
Austenitic rutile- basic, electrode for joining dissimilar steels, for welding corrosion resistant steels and steels that
are not readily weldable. This electrode yields tough between-layers in hard -surfacing operations. The weld metal
has strain harden-ability, cracking resistance, cavitation resistance, thermal shock resistance, scaling resistance up to
800C and low temperature toughness down to -100C.
Base materials:
Heat treatment:
Coating type:
Rutile
Chemical composition, wt %:
Welding current:
C
0.1
AC
DC +
Si
< 1.2
Mn
5
Cr
18
Ni
8.5
Welding positions:
Mechanical properties:
ReL / Rp 0.2:
Yield strength
Redrying temperature:
300C / 2h
Ferrite content: FN 0
Rm:
590 - 690
MPa(N/mm )
A5:
> 25
Impact energy
KV :
> 60 J
(+20C)
2
2.5
3.25
4
5
REF. E 673 - A / M
Tensile strength
mm
MPa(N/mm )
Elongation
> 350
Welding parameters
Length
Current
mm
A
250
300
350
350
350
30-50
50 85
70-125
110-165
165-230
Weight/
Packet
kg
3.5
3.8
4.5
4.5
4.5
Packing
Weight/
Carton
kg
14
15.2
18
18
18
Weight/
1000 pcs
kg *
18.1
35.4
53.6
81.8
approximate data
Date:2013-08-07
J4
Classification:
d.o.o.
INOX R 29/9
EN 1600:
DIN 8556 :
AWS A-5.4:
EN ISO 3581-A:
W.Nr.:
E 29 9 R 12
E 29 9 R 26
E 312-17
E 29 9 R 12
1.4337
Rutile, austenitic ferritic electrode for welding dissimilar and difficult to weld steels. Suitable for interpass
hardfacing. Because of high mechanical strength and starain hardenability suitable for wear resistant buildups on
gear wheels, shafts, The weld metals has excellent cavitation and cracking resistance.
Base materials:
Hardwelding steels
High-strength unalloyed and alloyed steels
Structural, spring, tool and heat treatable steels
High manganese steels
Heat treatment:
Coating type:
Welding current:
Chemical composition, wt %:
C
Si
Mn
Cr
Ni
0.11
29
Rutile
AC
DC +
0.9
0.9
Mechanical properties:
Welding positions:
Yield strength
Redrying temperature:
300C / 2h
ReL / Rp 0.2:
MPa(N/mm )
2
Tensile strength
Rm:
Elongation
A5:
> 20
Hardness
cca.235 HB
as welded
Ferrite content: FN 40
mm
Approvals:
2
2.5
3.25
4
5
REF. E 683- A / MS
> 500
Welding parameters
Length
Current
mm
A
250 /300
300
350
350
350
50 60
55 85
80 120
110 150
160 200
Weight/
packet
kg
4/3.8
4/3.8
4.5
4.5
4.5
Packing
Weight/
carton
kg
14/15.2
16/15.2
18
18
18
Weight/
1000 pcs
kg *
9.9
16.4
32.8
48.9
72.3
approximate data
Date:2013-08-07
J5
Classification:
EN 1600:
E 29 9 R 53
DIN 8556 :
E 29 9 R - 26
AWS A-5.4:
E 312-26
EN ISO 3581-A:E 29 9 R 53
W. Nr.:
1.4337
d.o.o.
INOX R 29/9 Fe
Rutile sintetic austenitic ferritic electrode with high recovery (160%) for welding dissimilar and difficult to weld
steels. Suitable for interpass hardfacing. Because of high mechanical strength and starain hardenability suitable for
wear resistant buildups on gear wheels, shafts, The weld metals has excellent cavitation and cracking resistance.
Base materials:
Hardwelding steels
High-strength unalloyed and alloyed steels
Structural, spring, tool and heat treatable steels
High manganese steels
Heat treatment:
Coating type:
Welding current:
Chemical composition, wt %:
C
Si
Mn
Cr
Ni
0.15
29
Rutile
AC
DC +
Welding positions:
Redrying temperature:
300C / 2h
0.9
Mechanical properties:
Yield strength
ReL / Rp 0.2:
> 500
MPa(N/mm )
2
Tensile strength
Rm:
Elongation
A5:
> 20
Hardness
cca.235 HB
as welded
Ferrite content: FN 40
Welding and packing data:
Approvals:
/
REF. E 685- A / M
mm
Welding parameters
Length
Current
mm
A
1.6
250
2
300
2.5
300
3.25
350
4
450
4
350
5
450
* approximate data
Date:2013-08-07
40 55
55 80
70 110
110 165
150 225
150 225
190 - 290
Weight/
Packet
kg
3.5
4
4
4.5
5.2
4.5
5.2
Packing
Weight/
carton
kg
17.5
16
16
18
26
18
26
Weight/
1000 pcs
kg *
8.6
16
26
50.6
96.3
162.5
J6
Classification:
DIN 1736 :
AWS A-5.11:
W.Nr.:
d.o.o.
EL NiCr15FeMn
E NiCrFe-3
2.4620
INOX B 70/15
Special basic coated Ni-base core wire electrode for welding in low-temperatury industry and in atomic
industry. Suited for service temperatures for 196C to 600C, otherwise up to scaling resistance temperature
of 1200C (S-free atmosphere). Thermal shock resistant to fully austenitic steels, highly resistant to hot cracking
and corrosion resistant at high temperautes.
Preheating as required by the base metal, interpass temperatures 125 - 150C.
Base materials:
-
Coating type:
Welding current:
Chemical composition, wt %:
C
Si
Mn
Cr
0.06
0.5
6.5
15
Basic
DC +
Welding positions:
Nb
2
Ni
Rest
Mechanical properties:
ReL / Rp 0.2:
Yield strength
Redrying temperature:
250 - 300C / 1-2h
Ferrite content: FN 0
Rm:
MPa(N/mm )
Elongation
A5:
> 30
Impact energy
KV :
> 60 J
(-196C)
Hardness:
170 HB
2.5
3.25
4
5
*
MPa(N/mm )
Tensile strength
mm
Approvals:
> 390
REF. E 491- A / M
Fe
7
Welding parameters
Length
Current
mm
A
300
350
350
350
75 100
100 140
140 180
170 210
Weight/
Packet
kg
4
4.5
4.5
5.5
Packing
Weight/
carton
kg
16
18
18
22
Weight/
1000 pcs
kg *
22.9
43.4
69.8
88
approximate data
Date:2012-01-09
J7
d.o.o.
HARDFACING ELECTRODES
UTOP 38 .. K1
UTOP 43 .. K2
UTOP 45 .. K3
UTOP 52 .. K4
UTOP 55 .. K5
TOOLDUR ... K6
E DUR 250 ... K7
E DUR 300 K8
E DUR 400 ... K9
E DUR 500 K10
E DUR 600 K11
E DUR 60R . K12
E DUR 600Si .. K13
TOOLDUR Co K14
E DUR 13 Cr .. K15
Classification:
EN 14 700:
DIN 8555:
d.o.o.
E Fe 3
E 3-UM-40 T
UTOP 38
Basic Mo, Cr, V flux-alloyed electrode with high toughness, wear , heavy impact resistance and easy
machinable weld metal.
It is suitable for hardfacing cold and hot working tools, for correction of cavities, like die blocks, dies and
containers for metal tube and rod extrusion tools for manufacture of hollow bodies, screws, nuts, rivers and bolts,
pressure die casting dies, die insert,
Base materials:
Heat treatment:
Coating type:
Welding current:
Chemical composition, wt %:
C
Cr
Mo
0.13
5.0
4.3
Basic
DC +
V
0.2
W
+
Welding positions:
Mechanical properties:
Hardness:
Redrying temperature:
(typical: 37 HRC)
400C / 1h
mm
Approvals:
2.5
3.25
4
5
REF. E 750- A / MS
300
350
450
450
70-90
110-135
130-170
180-220
Weight/
packet
kg
4.4
4
5.4
5.4
Packing
Weight/
Carton
Kg
22
20
27
27
Weight/
1000 pcs
kg *
17.3
34.6
72
110.2
approximate data
Date: 2012-01-09
K1
Classification:
EN 14 700:
DIN 8555:
d.o.o.
E Fe 3
E 3-UM-400PT
UTOP 43
Basic Mo, Cr, V flux-alloyed electrode with high toughness, wear , heavy impact resistance and easy
machinable weld metal.
It is suitable for hardfacing cold and hot working tools, for correction of cavities, like die blocks, dies and
containers for metal tube and rod extrusion tools for manufacture of hollow bodies, screws, nuts, rivers and bolts,
pressure die casting dies, die insert,
Base materials:
Heat treatment:
Coating type:
Welding current:
Chemical composition, wt %:
C
Si
Mn
Cr
0.3
0.25
1
2
Basic
DC +
Mo
0.5
V
0.6
Welding positions:
Mechanical properties:
Hardness:
Redrying temperature:
400C / 1h
as welded
PWHT 550C/2h
PWHT 800C/2h
mm
Approvals:
2.5
3.25
4
5
REF A / MS
300
350
450
450
70-90
110-135
130-170
180-220
Weight/
packet
kg
4
4.4
5.4
5.4
Packing
Weight/
Carton
Kg
20
22
27
27
Weight/
1000 pcs
kg *
17.3
34.6
72
110.2
approximate data
Date: 2010-09-15
K2
Classification:
EN 14 700: E Fe 3
DIN 8555: E3-UM-45-T
d.o.o.
UTOP 45
Basic Cr, W, V flux alloyed all purpose electrode, with very good weld metal thermo-shock stability. Working
temperature till 550C. It is suitable for hardfacing hot working tools.
Base materials:
Coating type:
Welding current:
Chemical composition, wt %:
C
Si
Mn
0.3
0.6
1.1
Basic
DC +
Cr
2.5
V
0.7
W
4.5
Welding positions:
Mechanical properties:
Hardness:
As welded:
PWHT 550C/2h
PWHT 800C/2h
Redrying temperature
Redrying temperature:
300-350C / 2 h
or
400C / 1 h
42-50HRC
45-53 HRC
20-35 HRC
mm
Approvals:
Welding parameters
Length
Current
mm
A
2.5
3.25
4
5
REF.E -A/MS
300
350
450
450
70-90
95-135
130-190
190-250
Weight/
packet
kg
4
4
5.4
5.4
Packing
Weight/
carton
kg
20
20
27
27
Weight/
1000 pcs
kg *
17.1
35.2
66.7
135
approximate data
Date:04. 09. 13
K3
Classification:
EN 14 700: E Fe 3
DIN 8555: E3-UM-60-T
d.o.o.
UTOP 52
Basic Cr, W, V flux alloyed all purpose electrode, with very good weld metal termo-shock stability. Working
temperature till 550C. It is suitable for hardfacing hot working tools.
Base materials:
unalloyed
alloyed steels
alloyed tool steels
Coating type:
Welding current:
Chemical composition, wt %:
C
Cr
Ni
Mo
0.4
7
0.5
0.7
Basic
DC +
V
0.7
W
7
Fe
rest
Welding positions:
Mechanical properties:
Hardness:
As welded:
PWHT 550C/2h -8h
50-59 HRC
53-58 HRC
Redrying temperature:
300-350C / 2 h
or
400C / 1 h
mm
Approvals:
2.5
3.25
4
5
REF.E-MS-A/MS
Welding parameters
Length
Current
mm
A
300
350
450
450
70 - 90
110-135
130-170
180-220
Weight/
packet
kg
Packing
Weight/
carton
kg
Weight/
1000 pcs
kg *
approximate data
Date:04. 09. 13
K4
Classification:
EN 14 700:
DIN 8555:
d.o.o.
E Fe 4
E 6-UM-60 T
UTOP 55
Basic Mo, Cr, V flux-alloyed electrode with high toughness, wear and heavy impact resistance. The weld metal
can be treated with grinding and cut after soft annealing.
It is suitable for hardfacing cold and hot working tools, like die blocks, dies and containers for metal tube and
rod extrusion, tools for manufacture of hollow bodies, screws, nuts, rivers and bolts, pressure die casting dies,
die insert, hot shear blades
Base materials:
Heat treatment:
Coating type:
Welding current:
Chemical composition, wt %:
C
Cr
Mo
0.4
5.0
4.8
Basic
DC +
Welding positions:
V
0.6
Mechanical properties:
Hardness:
Welded:
55-60 HRC
(typical: 57 HRC)
Redrying temperature:
400C / 1h
mm
Approvals:
2.5
3.25
4
5
REF. E 760- A / MS
W
+
300/350
350
450
450
70-90
110-135
130-170
180-220
Weight/
packet
kg
4
4.4
5.4
5.4
Packing
Weight/
carton
kg
20
22
27
27
Weight/
1000 pcs
kg *
17.1
35.2
66.7
135
approximate data
Date: 2012-01-09
K5
Classification:
EN 14 700:
E Fe 4
DIN 8555:
E 4-UM-60 65 S
AWS A 5.13: E Fe5-B
d.o.o.
TOOLDUR
Basic Mo, Cr, W,V flux-alloyed electrode for building up new and resurfacing warn parts of tools and machines
also at high temperatures.
It is suitable for building up and repairing tools of high speed steel, for resurfacing beads, shears, knives
The weld metal can be treated with grinding and cut after soft annealing.
Base materials:
Heat treatment:
Coating type:
Welding current:
Chemical composition, wt %:
C
Si
Mn
0.7
0.5
0.5
Basic
AC
DC +
Welding positions:
Cr
4.4
Mo
7.0
W
1.2
V
0.9
Mechanical properties:
Hardness:
Redrying temperature:
Welded:
50-64 HRC (typical: 61 HRC)
Hardened:
62-66 HRC
Soft annealed: 25-30 HRC
300C / 2h
mm
Approvals:
2.5
3.25
4
REF. E 770- A / MS
350
350
350
70-100
100-150
130-185
Weight/
packet
kg
4
4
4.4
Packing
Weight/
carton
kg
20
20
22
Weight/
1000 pcs
kg *
20.8
35.7
53.5
approximate data
Date: 2012-01-09
K6
Classification:
EN 14 700:
DIN 8555:
d.o.o.
E Fe 3
E 1-UM-250
E DUR 250
Basic, Cr flux-alloyed electrode for surfacing applications where medium hardness is required. It gives wear
and heavy impact resistant weld metal, suitable for machine parts exposed to wear, cog wheels, tracks etc
The deposit can not be hardened.
Base materials:
Steels
Cast steels
Heat treatment:
Coating type:
Welding current:
Chemical composition, wt %:
C
Cr
0.13
1.3
Basic
DC +
Welding positions:
Mn
1.3
Mechanical properties:
Hardness:
Redrying temperature:
230-300 HB
400C / 1h
2.5
3.25
4
5
6
REF. E 791- A / SP
Welding parameters
Length
Current
mm
A
mm
300
350
450
450
450
70-90
100-135
130-170
180-220
230-270
Weight/
packet
kg
4
4
5.4
5.4
5.4
Packing
Weight/
carton
kg
20
20
27
27
27
Weight/
1000 pcs
kg *
18.5
34.8
74
112.5
158.8
approximate data
Date: 2005-02-28
K7
Classification:
EN 14 700 :
DIN 8555:
d.o.o.
E Fe 1
E 1-UM-300
E DUR 300
Basic, Cr flux-alloyed electrode for surfacing applications where medium hardness is required. It gives wear
and heavy impact resistant weld metal, suitable for machine parts exposed to wear, cog wheels, tracks etc
Base materials:
Steels
Cast steels
Heat treatment:
Coating type:
Welding current:
Chemical composition, wt %:
C
Cr
0.18
1.2
Basic
DC +
Welding positions:
Mn
1.5
Mechanical properties:
Hardness:
Redrying temperature:
280-350 HB
400C / 1h
2.5
3.25
4
5
6
REF. E 801- A / M
Welding parameters
Length
Current
mm
A
mm
300
350
450
450
450
70-90
100-135
130-170
180-220
230-270
Weight/
packet
kg
4
4
5.4
5.4
5.4
Packing
Weight/
carton
kg
20
20
27
27
27
Weight/
1000 pcs
kg *
16.5
34.8
69.2
103,8
154,3
approximate data
Date: 2010-06-18
K8
Classification:
EN 14 700 :
DIN 8555:
d.o.o.
E Fe 3
E 1-UM-400
E DUR 400
Basic, Cr-Mn flux-alloyed electrode for surfacing applications. It gives wear and heavy impact resistant weld
metal, suitable for machine parts exposed to wear, machines for structural engineering, cog wheels, chain
wheels, tracks etc
Base materials:
Steels
Cast steels
Heat treatment:
Coating type:
Welding current:
Chemical composition, wt %:
C
Cr
0.25
1.3
Basic
DC +
Welding positions:
Mn
1.7
Mechanical properties:
Hardness:
Redrying temperature:
350-450 HB
400C / 1h
2.5
3.25
4
5
6
REF. E 811- A / M
Welding parameters
Length
Current
mm
A
mm
300
350
450
450
450
70-90
100-135
130-170
180-220
230-270
Weight/
packet
kg
4
4
5.4
5.4
5.4
Packing
Weight/
carton
kg
20
20
27
27
27
Weight/
1000 pcs
kg *
16,5
34,8
69,2
103,8
154.3
approximate data
Date: 2010-06-18
K9
Classification:
EN 14 700:
DIN 8555:
d.o.o.
E Fe 3
E 1-UM-50
E DUR 500
Basic coated electrode for very hard buildups on excavator components such as bucket edges, chain links,
cutting tools, dies, etc.
Base materials:
Steels
Cast steels
Coating type:
Welding current:
Chemical composition, wt %:
C
Mn
0.4
2.0
Basic
DC +
Cr
2.3
Welding positions:
Mechanical properties:
Hardness: 47 - 52 HRC
Redrying temperature:
(tipical: 51 HRC)
400C / 1 h
mm
Approvals:
2.5
3.25
4
5
6
REF. E 815 - A / SP
300
350
450
450
450
70 90
100 135
130 170
180 220
230 270
Weight/
packet
kg
4
4
5.4
5.4
5.4
Packing
Weight/
carton
kg
20
20
27
27
27
Weight/
1000 pcs
kg *
18
36
68.4
108
154.3
approximate data
Date:2005-07-08
K10
Classification:
EN 14 700 :
DIN 8555:
d.o.o.
E Fe 8
E 6-UM-60
E DUR 600
Electrode is used for surfacing of steel parts when heavy impact resistance is needed. Welding material posses
higher abrasion resistance.
Suitable for surfacing parts exposed to heavy abrasive wear by stone, coal, sand etc
The weld metal can be treated with grinding and cut after soft annealing.
Base materials:
Steels
Cast steels
Heat treatment:
Coating type:
Welding current:
Chemical composition, wt %:
C
0.5
Basic
DC +
Cr
8.5
Welding positions:
Mechanical properties:
Hardness:
Redrying temperature:
57-62 HRC
(typical: 59 HRC)
400C / 1h
2.5
3.25
4
5
6
REF. E 821- A / SP
Welding parameters
Length
Current
mm
A
mm
300
350
450
450
450
70-90
100-135
140-180
180-230
240-280
Weight/
packet
kg
4
4
5.4
5.4
5.4
Packing
Weight/
carton
kg
20
20
27
27
27
Weight/
1000 pcs
kg *
18
36
68.4
108
154.3
approximate data
Date: 2005-07-08
K11
Classification:
EN 14 700:
DIN 8555:
d.o.o.
E Fe 8
E 6-UM-55
E DUR 60 R
Rutile electrode is used for surfacing of steel parts when heavy impact resistance is needed. Welding material
posses higher abrasion resistance.
Suitable for surfacing parts exposed to heavy abrasive wear by stone, coal, sand etc
The weld metal can be treated with grinding and cut after soft annealing.
Base materials:
Steels
Cast steels
Coating type:
Welding current:
Chemical composition, wt %:
C
Si
Mn
0.5
0.5
0.5
Rutile
DC + (DC -)
AC
Cr
5
Mo
1
Welding positions:
Mechanical properties:
Redrying temperature:
Hardness:
350C / 1h
55- 60 HRC
(typical: 60 HRC)
mm
Approvals:
2.5
3.25
4
5
6
REF. E 821- A / M
300
350
450
450
450
70-90
100-135
140-180
180-230
240-280
Weight/
packet
kg
4
4
5.4
5.4
5.4
Packing
Weight/
carton
kg
20
20
27
27
27
Weight/
1000 pcs
kg *
18
36
68.4
108
154.3
approximate data
Date: 2005-07-08
K12
Classification:
EN 14 700: E Fe 8
DIN 8555: E 6-UM-55
d.o.o.
E DUR 600Si
Basic Cr and Si alloyed electrode is used for surfacing of steel parts when heavy impact resistance is needed.
Welding material posses higher abrasion resistance.
Suitable for surfacing parts exposed to heavy abrasive wear by stone, coal, sand etc
The weld metal can be treated with grinding and cut after soft annealing.
Base materials:
Steels
Cast steels
Coating type:
Welding current:
Chemical composition, wt %:
C
Si
0.5
3
Basic
DC +
Welding positions:
Mn
0,5
Mechanical properties:
Hardness:
Wear coeff.:
Redrying temperature:
55-59 HRC
0,8%
(typical: 58 HRC)
350C / 1h
mm
Approvals:
2.5
3.25
4
5
6
REF. E825-A / M
Cr
8
300
350
450
450
450
70-90
100-135
140-180
180-230
240-280
Weight/
packet
kg
4
4
5.4
5.4
5.4
Packing
Weight/
carton
kg
20
20
27
27
27
Weight/
1000 pcs
kg *
18
36
68.4
108
154.3
approximate data
Date: 2005-07-08
K 13
Classification:
EN 14 700: E Fe 3
DIN 8555: E 3-UM-50CTZ
d.o.o.
TOOLDUR Co
Special electrode with Co, for hot wear resistant surfacing on hot working tools, where high temperature
change and stress are present, as: cast tools, trimming tools, extrusion press tools, hot flow presses for steels,
hot shearing- machines.. Optimal operating temperatures are till 650C, resistant to scaling to 900C, weld metal
is nitratable. The weld metal is machinable. When surfacing low alloy steel, 3-4 layers are required.
Base materials:
Heat treatment:
Preheating:
150-400C according to weld.
Hardening:
1100-1150C (air)
Soft- annealing: 850-900C
Tempering:
700C
Coating type:
Welding current:
Chemical composition, wt %:
C
Si
Mn
Cr
0,2
0,5
0,2
9
Rutile-basic
AC
DC +
Welding positions:
Ni
1
Mo
4,5
Fe
rest
Mechanical properties:
Hardness:
Redrying temperature:
300C / 2h
Metal recovery:
mm
Approvals:
2.5
3.25
4
Co
12,5
350
350
350
70-100
100-150
160-185
Weight/
packet
kg
4
4
4.4
Packing
Weight/
Carton
kg
20
20
22
Weight/
1000 pcs
kg *
20,8
35,7
53,5
approximate data
Date: 2012.01.09
K14
Classification:
EN 14 700 :
DIN 8555:
d.o.o.
E Fe 8
E 5-UM-CGP
E DUR Cr 13
Electrode is used for surfacing of steel parts when heavy impact and moderate wear and corrosion resistance up
to 400C is needed. Suitable for surfacing parts of press tools, mixer arms, valve seats, feed gears, cutting
edges, knives, track rollers... The weld metal is martensitic and can be treated with grinding, it can be shaped
with hard metal cutting tool immediately after welding, before weld metal has cooled down to 200C.
Steel
Cast steel
Alloyed tool steel
Heat treatment:
Preheat and inter-pass temperature at least 200C, soft annealing 820C, hardening 950-1000C with cooling in
compressed air or oil.
Coating type:
Welding current:
Chemical composition, wt %:
C
Si
Basic
DC +
0.3
Welding positions:
0,5
Mn
Cr
0,8
13
Mechanical properties:
Hardness:
Redrying temperature:
49-56 HRC
350C / 1h
mm
Approvals:
2.5
3.25
4
5
REF. E 835 - A / M
300
350
450
450
70-90
90-120
110-160
150- 190
Weight/
packet
kg
4
4,4
5.4
5.4
Packing
Weight/
carton
kg
20
22
27
27
Weight/
1000 pcs
kg *
37,6
73
106
approximate data
Date:2005-07-14
K15
ELECTRODES, PRODUCING
d.o.o.
ABRADUR 54 L1
ABRADUR 58 L2
ABRADUR 60 .. L3
ABRADUR 64 L4
ABRADUR 65 L5
ABRADUR 66 L6
CrWC 600 .. L7
Classification:
EN 14 700:
DIN 8555:
d.o.o.
E Fe 8
E 6-UM-55-G
ABRADUR 54
Electrode is used when hard deposits with excellent abrasion at high compressive stresses , heavy impact
and high metal to metal wear resistance is needed.
It is suitable for hardfacing crusher hammers, mixers, crushers, dredging parts, gears, ploughshares, cams.. .
Weld metal is very difficult machinable.
Base materials:
Heat treatment:
Coating type:
Welding current:
Chemical composition, wt %:
C
Si
0.5
1.7
Basic
AC
DC +
Welding positions:
Cr
9.5
Mechanical properties:
Redrying temperature:
300C / 2h
Hardness:
52-56 HRC
Wear coeff.:
70%
Metal recovery:
110%
mm
Approvals:
2.5
3.25
4
5
6
*
REF. E 766- A / M
350
350
450
450
450
80-150
125-190
180-255
250-320
Weight/
packet
kg
4
4
5.4
5
Packing
Weight/
Carton
kg
20
20
27
25
Weight/
1000 pcs
kg *
24
42
77
119
approximate data
Date: 2012-01-09
L1
Classification:
EN 14 700:
DIN 8555:
d.o.o.
E Fe 14
E 10-UM-60-GR
ABRADUR 58
Electrode produces hard deposits extremely resistant to abrasive and moderate impact.
It is suitable for hardfacing crushing and earthmoving equipment, soft ore crushers, conveyor screws, bucket
teeth and lips.
Welding of buffer layers with Inox B 18/8/6 or Mn17Cr13 electrodes is recommended.
The weld metal can be treated with grinding.
Base materials:
Heat treatment:
Coating type:
Welding current:
Chemical composition, wt %:
C
Cr
3.2
32
Rutile
AC
DC +
Welding positions:
Mechanical properties:
Redrying temperature:
300C / 2h
Hardness:
Wear coeff.:
2%
Metal recovery:
180%
mm
Approvals:
2.5
3.25
4
5
REF. E 768- A / M
(20C)
350
350
450
450
65-95
110-140
160-200
210-270
Weight/
packet
kg
4
4
5
5
Packing
Weight/
Carton
kg
20
20
25
25
Weight/
1000 pcs
kg *
33
55.6
111
172.5
approximate data
Date: 2012-01-09
L2
Classification:
EN 14 700:
DIN 8555:
d.o.o.
E Fe 14
E 10-UM-60-GR
ABRADUR 60
Rutile-coated chromium carbide electrode produces hard deposits extremely resistant to abrasive and
moderate impact. It is suitable for hardfacing crushing and earthmoving equipment, soft ore crushers,
conveyor screws, bucket teeth and lips.
Welding of buffer layers with Inox 18/8/6 or Mn17Cr13 electrodes is recommended.
The weld metal can be treated with grinding.
Base materials:
Heat treatment:
Coating type:
Welding current:
Chemical composition, wt %:
C
Cr
3.6
32
Rutile
AC
DC +
Welding positions:
V
0,7
Mechanical properties:
Redrying temperature:
300C / 2h
Hardness:
59-64 HRC
Wear coeff.:
= 40%
G= 0,9
typical: 60 HRC
Metal recovery:
mm
Approvals:
2.5
3.25
4
5
REF. E 767 A /M
(20C)
350
350
450
450
65-95
110-140
160-200
210-270
Weight/
packet
kg
4.5
4.5
5
5
Packing
Weight/
Carton
kg
22.5
22.5
25
25
Weight/
1000 pcs
kg *
33
55.6
111
172.5
approximate data
Date: 2005-07-08
L3
Classification:
EN 14 700 :
DIN 8555:
d.o.o.
E Fe 15
E 10-UM-65-GR
ABRADUR 64
Electrode produces hard deposits extremely resistant to abrasive with moderate impact up to 450C.
It is suitable to hardfacing in the brick and cement making industry, screws of refractory material presses
conveyor belt guides, screws, mill blades and scratches, centre risers, excavator cogs...
Welding of buffer layers with Inox B 18/8/6 or EMn17Cr13 electrodes is recommended.
The weld metal can be treated with grinding.
Base materials:
Steel
Cast steel
Heat treatment:
Coating type:
Welding current:
Chemical composition, wt %:
C
Cr
6
26
Basic
AC
DC +
Welding positions:
Nb
7.5
Mechanical properties:
Redrying temperature:
300C / 2h
Hardness:
62-65 HRC
Wear coeff.:
0.5%
typical: 64 HRC
Metal recovery:
190%
mm
Approvals:
2.5
3.25
4
5
REF. E 771- A / MS
(20C)
350
450
450
110-140
160-200
210-270
Weight/
packet
kg
4
4.4
5
5
Packing
Weight/
Carton
kg
20
22
25
25
Weight/
1000 pcs
kg *
31
55.5
111
172.5
approximate data
Date: 2012-01-09
L4
Classification:
EN 14 700:
DIN 8555:
d.o.o.
E Fe 16
E 10-UM-65-G
ABRADUR 65
Electrode produces hard deposits extremely resistant to abrasive wear against the minerals at medium impact
up to 500C.
It is suitable to hardfacing on earth moving equipment, pump bodies, ploughshares, nut oil presses, conveyor
belt guides, mill blades and scratches, clinker mills, centre risers.
Welding of buffer layers with Inox B 18/8/6 or E Mn17Cr13 electrodes is recommended.
The weld metal can be treated with grinding.
Base materials:
Steels
Cast steels
Heat treatment:
Coating type:
Welding current:
Chemical composition, wt %:
C
Cr
4.3
9.5
Basic
AC
DC +
Welding positions:
Mechanical properties:
Redrying temperature:
Hardness:
Wear coeff.:
300C / 2h
62-67 HRC
2%
Mo
2.0
typical: 65 HRC
(20C)
Metal recovery:
120%
mm
Approvals:
3.25
4
5
REF. E 774- A / MS
350
450
450
100-130
160-190
220-250
Weight/
packet
kg
4.4
5.4
4.5
Packing
Weight/
carton
kg
22
27
22.5
Weight/
1000 pcs
kg *
37.8
59
88
approximate data
Date: 2012-01-09
L5
Classification:
EN 14 700:
DIN 8555:
d.o.o.
E Fe 16
E 10-UM-65-GR
ABRADUR 66
Electrode produces extremely hard deposits extremely resistant to abrasive wear against the minerals at
medium impact up to 600C.
It is suitable to hardfacing on earth moving equipment, wearing parts in the cement and brick making industry,
fire grate bars, fire grate teeth in the iron and steel industry.
Welding of buffer layers with Inox 18/8/6 or EMn17Cr13 electrodes is recommended.
The weld metal can be treated with grinding.
Base materials:
Steels
Cast steels
Heat treatment:
Coating type:
Welding current:
Chemical composition, wt %:
C
Cr
Mo
6.0
22.0
6.0
Basic
AC
DC +
Welding positions:
Nb
6.0
W
2.0
V
1.0
Mechanical properties:
Hardness:
Redrying temperature:
300C / 2h
62-67 HRC
Metal recovery:
235%
mm
Approvals:
3.25
4
4
5
REF. E 777- A / MS
350
350
450
450
100-130
160-190
160-190
220-250
Weight/
packet
kg
4
5.4
5
5
Packing
Weight/
carton
kg
20
26
25
25
Weight/
1000 pcs
kg *
65.8
128
200
approximate data
Date: 2012-01-09
L6
Classification:
EN 14 700:
DIN 8555:
d.o.o.
E Fe 16
E 10-UM-60-C
CrWC 600
Electrode produces extremely hard deposits resistant to abrasive wear against the minerals and other
materials. Weld metal is not recommended to shock-loadings.
Welding of buffer layers with INOX B 18/8/6 and combination welding with E DUR 600 is recommended.
It is suitable to weld string beads on earth moving, cement mill and brick making equipment.
Base materials:
Steels
Cast steel
Austenitic manganese steels
Heat treatment:
Coating type:
Welding current:
Chemical composition, wt %:
C
Cr
3.8
28
Basic
AC
DC +
Welding positions:
W
4.5
Mechanical properties:
Hardness:
Redrying temperature:
57-62 HRC
typical: 60 HRC
300C / 2h
mm
Approvals:
3.25
4
5
REF. E 780- A / SP
(20C)
350
450
450
100-130
160-190
220-250
Weight/
packet
kg
4
5.2
5.2
Packing
Weight/
carton
kg
20
26
26
Weight/
1000 pcs
kg *
47.5
96.3
157.6
approximate data
Date: 2005-07-08
L7
MANGANESE ALLOYED
d.o.o.
HARDFACING ELECTRODES
E Mn 14 ... M1
E Mn 14 Cr 4 .. M2
E Mn 17 Cr 13 .... M3
E Mn 17 Cr 10 Nb 3 .. M4
Classification:
EN 14 700: E Fe 9
DIN 8555: E 7-UM-200-KP
d.o.o.
E Mn14
Electrode is used for joining and surfacing of steel parts when heavy impact and friction resistance is needed.
After stain hardening higher abrasion resistance is achieved.
Suitable for weld heavy crushing eguipment as jaws, cones, armour and mantles of rotary crushers and for rail
equipment in Mn 14%steel. It is not suitable for non austenitic steels.
The weld material can be mechanically shaped before hardening.
Base materials:
Heat treatment:
Coating type:
Welding current:
Chemical composition, wt %:
C
Mn
1.2
12.5
Basic
AC
DC +
Welding positions:
Mo
0.7
Mechanical properties:
Redrying temperature:
300C / 2h
Metal recovery:
Hardness:
175-225 HB
typical: 200 HB
48 HRC(stain hardened)
Wear coeff.:
75%
110%
mm
Approvals:
3.25
4
5
REF. E 840- A / M
450
450
450
110-135
140-175
180-230
Weight/
packet
kg
5
5
5.4
Packing
Weight/
carton
kg
25
25
27
Weight/
1000 pcs
kg *
46.7
72.5
111
approximate data
Date: 2012-01-09
M1
Classification:
EN 14 700:
DIN 8555:
AWS A-5.13:
d.o.o.
E Fe 9
E 7-UM-200-KP
E Fe Mn-A
E Mn14Cr4
Electrode is used for joining and surfacing of steel parts when heavy impact and friction resistance is needed. It
is used for welding buffer layers when electrodes for depositing a hardfacing alloy with greater abrasion
resistance are used . After stain hardening higher abrasion resistance is achieved.
Suitable for weld heavy crushing eguipment as toothed crusher rolls, ore crusher crown wheel, toothed rolls for
twin rotor crusher , shovel and dredger buckets, for rail equipment in Mn steel.
The weld material can be mechanically shaped before hardening.
Base materials:
Heat treatment:
Coating type:
Welding current:
Chemical composition, wt %:
C
Mn
Cr
0.8
13.8
3.7
Basic
AC
DC +
Welding positions:
Ni
3.7
Mechanical properties:
Hardness:
Redrying temperature:
300C / 2h
175-225 HB
typical: 220 HB
50 HRC (stain hardened)
Wear coeff.:
Metal recovery:
75%
120%
mm
Approvals:
3.25
4
5
REF. E 842- A / MS
Mo
0.7
450
450
450
100-140
140-180
180-230
Weight/
packet
kg
5
5
5
Packing
Weight/
carton
kg
25
25
25
Weight/
1000 pcs
kg *
50.5
76.9
121.9
approximate data
Date: 2012-01-09
M2
Classification:
EN 14 700: E Fe 9
DIN 8555 : E 7-UM-250KP
d.o.o.
E Mn17Cr13
Electrode is used for joining and surfacing of steel parts when heavy impact and cavitation resistance up to
500C is needed. It is used for welding buffer layers when Abradur 54, 58, 64, 65 and 66 electrodes are used.
Suitable for weld rails, points, building up dredge pumps hydraulic press pistons and crushing equipment
subjected to heavy shock.
The weld material can be mechanically shaped before hardening.
Base materials:
Heat treatment:
Coating type:
Welding current:
Chemical composition, wt %:
C
Mn
0.6
16.5
Rutile
AC
DC +
Welding positions:
Cr
13.5
Mechanical properties:
Redrying temperature:
300C / 2h
Metal recovery:
Hardness:
200-260 HB
typical: 230 HB
48 HRC (stain hardened)
Wear coeff.:
70%
140%
mm
Approvals:
3.25
4
5
REF. E 841- A / M
450
450
450
100-140
150-190
200-250
Weight/
packet
kg
5.4
5.4
5.4
Packing
Weight/
carton
kg
27
27
27
Weight/
1000 pcs
kg *
64.1
96.2
135.1
approximate data
Date: 2010-06-18
M3
Classification:
EN 14 700: E Fe 9
d.o.o.
E Mn17Cr10Nb3
Electrode is used for surfacing of steel parts exposed to wear metal to metal at heavy impact, increased
pressure and temperature up to 500C. Weld material is extremely resistant toward strikes and moderately
toward abrasion.
Suitable for welding hammers, bucket teeth, seat of blast, furnace bells and armour plates.
If the weld material has to be mechanically shaped before hardening, we suggest to use INOX B 18/8/6 or
INOX R 18/8/6Fe electrodes for the last welding layer.
Base materials:
Austenitic 14% Mn steel
Carbon steels
Low alloy steels
Heat treatment:
For austenitic Mn steels preheating to 100C is recommended. No stress relieving is recommended for this type
of metal.
For carbon and low alloy steels preheating to 250C is recommended. When welding thick walled components
stress relieving at 550 -- 650C is suggested, structure and mechanical properties remain the same.
Coating type:
Welding current:
Chemical composition, wt %:
C
Mn
1.1
16.5
Basic
AC
DC +
Welding positions:
Cr
9.7
Mechanical properties:
Hardness:
Redrying temperature:
300C / 2h
230-300 HB
typical: 290 HB
45 HRC (stain hardened)
Wear coeff.:
Metal recovery:
12%
140%
mm
Approvals:
3.25
4
5
REF. E 844- A / SP
Nb
2.3
450
450
450
100-140
150-210
190-260
Weight/
packet
kg
4.5
4.5
4.5
Packing
Weight/
carton
kg
22,5
22,5
22,5
Weight/
1000 pcs
kg *
42
91
142
approximate data
Date: 2005-07-08
M4
Notes:
DUROSTEL 1 E .. N1
DUROSTEL 1 P . N2
DUROSTEL 6 E . N3
DUROSTEL 6 P . N4
DUROSTEL 12 E ... N5
DUROSTEL 12 P N6
DUROSTEL 21 E ... N7
DUROSTEL 21 P .. N8
DUROSTEL F P N9
Non-standard wires and electrodes, available only on customers request.
Classification:
DIN 8555:
AWS A-5.13:
d.o.o.
E 20-UM-55-ZCT
E CoCr-C
DUROSTEL 1 E
Welding electrode is recommended for hardfacing of material where high wear metal to metal resistance is
requested and abrasion resistance at increased temperatures 500- 800C, sometimes till 1100C and where
good corrosion resistance is required. The weld material is not suitable for pieces exposed to mechanical
shocks. The deposit is hardest of all Durostel types.
Suitable to weld hot rolls, hot rolling glides, kneading rolls, drawling blocks, screw presses, hot shear blades,
glass cutters, hot scrapers, pump and press casings, burner nozzles
Welding of buffer lavers with Inox 18/8/6 electrodes is recommended.
Base materials:
Steels
Coating type:
Chemical composition, wt %:
C
Cr
W
2.5
30.0
12.5
Welding Current:
AC
DC+
Welding positions:
Co
rest
Mechanical properties:
Hardness :
Redrying tempetature:
55 HRC ( 20)
37 HRC (500)
300C/2h
mm
Approvals:
3.25
4
5
REF. E - A / MS
350
350
350
90-120
110-150
150-200
Weight/
Packet
kg
Packing
Weight/
carton
kg
Weight/
1000 pcs
kg *
approximate data
Date:2010-02-17
N1
Classification:
DIN 8555:
G/WSG-20-GO-55-ZCT
AWS A-5.13: R CoCr-C
d.o.o.
DUROSTEL 1 P
Welding rod is recommended for hardfacing of material where high wear metal to metal resistance is requested
and abrasion resistance at increased temperatures 500- 800C, sometimes till 1100C and where good
corrosion resistance is required. The weld material is not suitable for pieces exposed to mechanical shocks.
The deposit is hardest of all Durostel types.
Suitable to weld hot rolls, hot rolling glides, kneading rolls, drawling blocks, screw presses, hot shear blades,
glass cutters, hot scrapers, pump and press casings, burner nozzles
Welding of buffer lavers with Inox 18/8/6 electrodes is recommended.
Base materials:
Steels
Chemical composition, wt %:
C
Cr
W
2.5
30.0
12.5
TIG welding
Co
rest
Mechanical properties:
Hardness :
55 HRC ( 20)
37 HRC (500)
mm
Approvals:
REF. E - A / MS
Welding parameters
Length
Current
mm
A
Weight/
Packet
kg
Packing
Weight/
carton
kg
Weight/
1000 pcs
kg *
approximate data
Date:2010-02-17
N2
Classification:
DIN 8555:
AWS A-5.13:
d.o.o.
E 20-UM-40 ZCT
E CoCr-A
DUROSTEL 6 E
Welding electrode is recommended for hardfacing of material where high wear metal to metal resistance is
requested, erosion, abrasion and cavitation at increased temperatures up to 900C and where good corrosion
resistance is required. Because of excellent tenacity and hardness the weld material is extremely resistant
toward thermal and mechanical shocks.
Suitable for welding exhaust valves, hot shear blades, guide rolls, kneading equipment, steam nozzles,
mechanical sealings, bushings, blanking dies, press mandrels, trimming dies
Welding of buffer lavers with Inox 18/8/6 electrodes is recommended.
Base materials:
Steels
Corrosion resisting steels
Cast steels
Coating type:
Welding Current:
AC
DC+
Welding positions:
Chemical composition, wt %:
C
Cr
W
1.2
28.0
4.5
Co
rest
Mechanical properties:
Redrying temperature:
Hardness :
300C/2h
42 HRC ( 20)
30HRC (500)
mm
Approvals:
3.25
4
5
REF. E 930 - A / MS
350
350
350
90-120
110-150
150-200
Weight/
Packet
kg
Packing
Weight/
carton
kg
Weight/
1000 pcs
kg *
approximate data
Date:2010-02-17
N3
Classification:
DIN 8555: G/WSG-20-GO-45-ZCT
AWS A-5.13: R CoCr-A
d.o.o.
DUROSTEL 6 P
Welding rod is recommended for hardfacing of material where high wear metal to metal resistance is requested,
erosion, abrasion and cavitation at increased temperatures up to 900C and where good corrosion resistance is
required. Because of excellent tenacity and hardness the weld material is extremely resistant toward thermal
and mechanical shocks.
Suitable for welding exhaust valves, hot shear blades, guide rolls, kneading equipment, steam nozzles,
mechanical sealings, bushings, blanking dies, press mandrels, trimming dies
Welding of buffer lavers with Inox 18/8/6 electrodes is recommended.
Base materials:
Steels
Corrosion resisting steels
Cast steels
Chemical composition, wt %:
C
Cr
W
1.2
28.0
4.5
TIG welding
Co
rest
Mechanical properties:
Hardness :
42 HRC ( 20)
30 HRC (500)
mm
Approvals:
REF. E - A / MS
Welding parameters
Length
Current
mm
A
Weight/
Packet
kg
Packing
Weight/
carton
kg
Weight/
1000 pcs
kg *
approximate data
Date:2010-02-17
N4
Classification:
DIN 8555:
AWS A-5.13:
d.o.o.
E 20-UM-50-ZCT
E CoCr-B
DUROSTEL 12 E
Welding electrode is recommended for hardfacing purposes where high wear metal to metal resistance is
requested, erosion and cavitation.. The welds keep high density up to 1000C and have good corrosion
resistance and posses excellent abrasion resistance because of the low thermal expansion of the weld metal .
Suitable to weld tools in wood, paper and plastic industry, mixers, feeder screws, knives, sliding guides, hot
shear blades, screw presses, kneading rolls, drawing blocks, hot rolling guides, hot rolling rolls
Welding of buffer lavers with Inox 18/8/6 electrodes is recommended.
Base materials:
Steels
Corrosion resisting steels
Cast steels
Coating type:
Chemical composition, wt %:
C
Cr
W
1.5
30.0
8.0
Welding current:
AC
DC+
Welding positions:
Co
rest
Mechanical properties:
Redrying temperature:
Hardness :
300C/2h
48 HRC ( 20)
32HRC (500)
mm
Approvals:
3.25
4
5
REF. E - A / MS
350
350
350
90-120
120-155
150-190
Weight/
Packet
kg
Packing
Weight/
carton
kg
Weight/
1000 pcs
kg *
approximate data
Date:2010-02-17
N5
Classification:
DIN 8555: G/WSG-20-GO-50-ZCT
AWS A-5.13: R CoCr-B
d.o.o.
DUROSTEL 12 P
Welding rod is recommended for hardfacing purposes where high wear metal to metal resistance is requested,
erosion and cavitation.. The welds keep high density up to 1000C and have good corrosion resistance and
posses excellent abrasion resistance because of the low thermal expansion of the weld metal .
Suitable to weld tools in wood, paper and plastic industry, mixers, feeder screws, knives, sliding guides, hot
shear blades, screw presses, kneading rolls, drawing blocks, hot rolling guides, hot rolling rolls
Welding of buffer lavers with Inox 18/8/6 electrodes is recommended.
Base materials:
Steels
Corrosion resisting steels
Cast steels
Chemical composition, wt %:
C
Cr
W
1.5
30.0
8.0
TIG welding
Co
rest
Mechanical properties:
Hardness :
48 HRC ( 20)
32HRC (500)
mm
Approvals:
REF. E - A / M
Welding parameters
Length
Current
mm
A
Weight/
Packet
kg
Packing
Weight/
carton
kg
Weight/
1000 pcs
kg *
approximate data
Date:2010-02-17
N6
Classification:
DIN 8555:
d.o.o.
E 20-UM-300-CKZT
DUROSTEL 21E
Welding electrode is recommended for hardfacing purposes where high wear metal to metal resistance is
requested, erosion and cavitation.. The welds keep high density up to 1150C, have very good slide and blank
properties. They are stable toward temperature changes and suitable for stain hardening.
Suitable to weld valves, reparations at steam turbines, motor valves where no preheating is possible, tools for
rolling mills, agitating apparatus, mills
Welding of buffer lavers with Inox 18/8/6 electrodes is recommended.
Base materials:
Steels
Corrosion resisting steels
Cast steels
Coating type:
Chemical composition, wt %:
C
Cr
Mo
Ni
0.25
28.0
5.0
2.8
Welding Current:
AC
DC+
Welding positions:
Co
rest
Mechanical properties:
Redrying temperature:
Hardness :
300C/2h
30 HRC ( 20C )
240 HB ( 500C )
mm
Approvals:
3.25
4
5
REF. E - A / MS
350
350
350
90-120
110-150
150-200
Weight/
Packet
kg
Packing
Weight/
carton
kg
Weight/
1000 pcs
kg *
approximate data
Date:2010-02-17
N7
Classification:
DIN 8555: G/WSG-20-GO-300-CKZT
d.o.o.
DUROSTEL 21P
Welding rod is recommended for hardfacing purposes where high wear metal to metal resistance is requested,
erosion and cavitation.. The welds keep high density up to 1150C, have very good slide and blank properties.
They are stable toward temperature changes and suitable for stain hardening.
Suitable to weld valves, reparations at steam turbines, motor valves where no preheating is possible, tools for
rolling mills, agitating apparatus, mills
Welding of buffer lavers with Inox 18/8/6 electrodes is recommended.
Base materials:
Steels
Corrosion resisting steels
Cast steels
Gas Welding
Chemical composition, wt %:
C
Cr
Mo
Ni
0.25
28.0
5.0
2.8
TIG welding
Co
rest
Mechanical properties:
Hardness :
30 HRC ( 20C)
240 HB ( 500C)
mm
Approvals:
REF. E - A / MS
Welding parameters
Length
Current
mm
A
Weight/
Packet
kg
Packing
Weight/
carton
kg
Weight/
1000 pcs
kg *
approximate data
Date:2010-02-17
N8
Classification:
d.o.o.
DUROSTEL FP
Welding rod is recommended for hardfacing machine parts exposed to the erosion, cavitation and wear up to
900C. The welds are corrosion resistant till 900C, have very good slide and blank properties, they are stable
toward temperature changes and are nonmagnetic. The weld metal is easy machinable.
Suitable to weld valves of engine motors, combustion chambers
Welding of buffer lavers with Inox 18/8/6 electrodes is recommended.
Base materials:
Steels
Corrosion resisting steels
Cast steels
Gas welding
TIG welding
Chemical composition, wt %:
C
Cr
Ni
W
1.7
26.0
23.0
12.5
Co
rest
Mechanical properties:
Hardness :
42 HRC
mm
Approvals:
REF. E - A / MS
Welding parameters
Length
Current
mm
A
Weight/
Packet
kg
Packing
Weight/
carton
kg
Weight/
1000 pcs
kg *
approximate data
Date:2010-02-17
N9
d.o.o.
MONEL ... O1
MONEL C .. O2
SUPER Ni ... O3
CAST Ni .. O4
CAST Ni C O5
CAST NiFe . O6
CAST NiFe C ... O7
CAST NiFe B . O8
CAST NiFe BC ... O9
CAST NiFe10 .. O10
CAST Fe . O11
SL 250 O12
Classification:
DIN 8573:
E NiCu BG 12
AWS A-5.15: E NiCu-B
EN ISO 1071: EC NiCu-1
d.o.o.
MONEL
Electrode with monel-core wire is suited for cold welding of grey cast iron and other types of cast iron. It is
suitable for repair purposes. By using small electrode diameters heat input should be kept low.
The weld metal is easily machinable.
Base materials:
Grey cast iron
Cast iron
Heat treatment:
Coating type:
Welding current:
Chemical composition, wt %:
Ni
Cu
65
30
Welding positions:
Mechanical properties:
AC
DC -
Tensile strength
Rm:
300
MPa (N/mm )
160
HB
Redrying temperature:
Hardness:
200C/1h
Approvals:
mm
2.5
3.25
4.00
5.00
REF. E860- A / MS
Welding parameters
Length
Current
mm
A
300
350
350
350
50-80
80-110
110-150
150-190
Weight/
packet
kg
5
6
6
6
Packing
Weight/
carton
kg
20
24
24
24
Weight/
1000 pcs
kg *
16.3
32.2
48.4
96.8
approximate data
Date:2010-02-14
O1
Classification:
DIN 8573:
E NiCu G13
AWS A-5.15: E NiCu-B
EN ISO 1071: EC NiCu-1
d.o.o.
MONEL C
Electrode with monel-core wire is suited for cold welding of grey cast iron and other types of cast iron. It is
suitable for repair purposes. By using small electrode diameters heat input should be kept low.
The weld metal is easily machinable. Electrode contents no Ba components.
Base materials:
Grey cast iron
Cast iron
Heat treatment:
Coating type:
Welding current:
Chemical composition, wt %:
Ni
Cu
70
30
Welding positions:
Mechanical properties:
AC
DC +
Tensile strength
Rm:
300
MPa (N/mm )
160
HB
Redrying temperature:
Hardness:
200C/1h
Approvals:
mm
2.5
3.25
4.00
5.00
REF. E859- A / MS
Welding parameters
Length
Current
mm
A
300
350
350
350
50-80
80-110
110-150
150-190
Weight/
packet
kg
5
5
6
6
Packing
Weight/
carton
kg
20
20
24
24
Weight/
1000 pcs
kg *
16.3
32.2
48.4
96.8
approximate data
Date:2012-01-09
O2
Classification:
DIN 8573:
AWS A-5.15:
EN ISO 1071:
d.o.o.
E Ni BG 12
E Ni-Cl
EC Ni-Cl-1
SUPER Ni
Electrode with pure Ni-core wire for cold welding of grey and malleable cast iron also suitable for joining them
with steel. Suitable for repair purposes, repair of broken parts, building up missing parts and correction of
machining errors, joining cast iron for rectification of castings. The weld material is soft and easy machinable
We suggest cold impact forging to achieve stress relieving.
By using small electrode diameters heat input should be kept low. Ground material should be clean. For scoring
we suggest our electrode Sekator 2 B or Sekator 2 A, grinding is not recommended.
Base materials:
Grey cast iron
Malleable cast iron
Heat treatment:
Coating type:
Welding current:
Chemical composition, wt %:
Ni
96.0
Basic
AC
DC -
Welding positions:
Mechanical properties:
Tensile strength
Redrying temperature:
Rm:
300
MPa (N/mm )
160
HB
200C/1h
Hardness:
Approvals:
mm
2.5
3.25
4.00
5.00
REF. E861- A / SM
Welding parameters
Length
Current
mm
A
300
350
350
350
50-80
80-110
110-150
150-190
Weight/
packet
kg
5
6
6
6
Packing
Weight/
carton
kg
20
24
24
24
Weight/
1000 pcs
kg *
16
32.3
48.4
96.8
approximate data
Date:2010-02-14
O3
Classification:
DIN 8573:
AWS A-5.15:
EN ISO 1071:
d.o.o.
E Ni BG 12
E Ni-Cl
EC Ni Cl-1
CAST Ni
Electrode with pure Ni-core wire for cold welding of grey and malleable cast iron without preheating , for repair
purposes, also suitable for joining them with steel, copper and monel. Suitable for repair purposes, repair of
broken parts, building up missing parts and correction of machining errors, joining cast iron for rectification of
castings. The weld metal is soft and easily machinable. We suggest cold impact forging to achieve stress
relieving.
By using small electrode diameters heat input should be kept low. Ground material should be clean.
For scoring we suggest our electrode Sekator 2B or Sekator 2A, grinding of is not recommended.
Base materials:
Grey cast iron
Heat treatment:
Coating type:
Welding current:
Chemical composition, wt %:
Ni
95
Basic
AC
DC -
Welding positions:
Mechanical properties:
Redrying temperature:
Tensile strength
Rm:
300
MPa (N/mm )
200C/1h
Hardness:
160 -175
Welding parameters
Length
Current
mm
A
mm
Approvals:
2.5
3.25
4.00
5.00
REF. E 865 - A / SM
300
350
350
350
50-80
80-110
110-150
150-190
Weight/
packet
kg
4.5
5.5
6
HB
Packing
Weight/
carton
kg
22.5
27.5
24
Weight/
1000 pcs
kg *
16
32
49
approximate data
Date:2012-01-09
O4
Classification:
DIN 8573:
AWS A-5.15:
EN ISO 1071:
d.o.o.
E Ni BG 13
E Ni-Cl
EC Ni Cl-1
CAST Ni C
Nickel electrode for joining and surfacing of grey cast iron. Stable arc with clear bead appearance. Electrode
provides crack resistant bead without pore formation. Chipforming machining processes can be used. Weld
induced stresses can be reduced by hammer peening.
Repair and recovery of broken or worm parts made of grey and malleable cast iron. Filling of voids and
blowholes, machining errors. Joining of grey cast iron to steel.
Base materials:
Grey cast iron
Heat treatment:
Coating type:
Welding current:
Chemical composition, wt %:
Ni
98.0
Basic
AC
DC +
Welding positions:
Mechanical properties:
Redrying temperature:
Tensile strength
Rm:
300
MPa (N/mm )
160
HB
200C/1h
Hardness:
mm
Approvals:
2.5
3.25
4.00
5.00
REF. E 880- A / SM
Welding parameters
Length
Current
mm
A
300
350
350
350
50-80
80-110
110-150
150-190
Weight/
packet
kg
5
5
6
Packing
Weight/
carton
kg
20
20
24
Weight/
1000 pcs
kg *
16
32
49
approximate data
Date:2010-06-23
O5
Classification:
DIN 8573:
AWS A-5.15:
EN ISO 1071:
d.o.o.
E NiFe BG 12
E NiFe-Cl
ECNiFe -Cl-1
CAST Ni Fe
Electrode with Ni-Fe alloyed core wire for cold welding nodular, grey and malleable cast iron, also suitable for
the rectification an repair of these grades and joining them with steel. Tensile strength is higher than tensile
strength of Ni electrodes. Welding joints are suitable for after treatment.
By using small electrode diameters heat input should be kept low. The weld metal is stronger and more
resistant to impurities than nickel-cored type.
Base materials:
Heat treatment:
Coating type:
Welding current:
Chemical composition, wt %:
Ni
53
Welding positions:
Mechanical properties:
Basic
AC
DC -
Tensile strength
Rm:
Fe
42
450
MPa (N/mm )
190
HB
Redrying temperature:
200C/1h
Hardness:
mm
Approvals:
2.5
3.25
4.00
5.00
REF. E871 - A / SM
Welding parameters
Length
Current
mm
A
300
350
350
350
60-80
90-110
130-170
170-200
Weight/
packet
kg
4
5
5
5
Packing
Weight/
carton
kg
16
20
20
20
Weight/
1000 pcs
kg *
16
32
47
approximate data
Date:2012-01-09
O6
Classification:
DIN 8573:
AWS A-5.15:
EN ISO 1071:
d.o.o.
E NiFe BG13
E NiFe-Cl
EC NiFe-Cl- 1
CAST Ni Fe C
Electrode with Ni-Fe alloyed core wire for cold welding nodular, grey and malleable cast iron, also suitable for
the rectification an repair of these grades and joining them with steel. Tensile strength is higher than tensile
strength of Ni electrodes. Welding joints are suitable for after treatment.
By using small electrode diameters heat input should be kept low. The weld metal is stronger and more
resistant to impurities than nickel-cored type. Electrode contents no Ba components,
Base materials:
Heat treatment:
Coating type:
Welding current:
Chemical composition, wt %:
Ni
53
Welding positions:
Mechanical properties:
Basic
AC
DC +
Tensile strength
Rm:
Fe
43
450
MPa (N/mm )
190
HB
Redrying temperature:
200C/1h
Hardness:
mm
Approvals:
2.5
3.25
4.00
5.00
REF. E882- A / MS
Welding parameters
Length
Current
mm
A
300
350
350
350
60-80
90-110
130-170
170-200
Weight/
packet
kg
4.5
5
5
Packing
Weight/
carton
kg
18
20
20
Weight/
1000 pcs
kg *
16
32
45
approximate data
Date:2012-01-08
O7
Classification:
DIN 8573:
E NiFe B G12
AWS A 5.15: E Ni Fe-Cl
EN ISO 1071: EC NiFe-Cl-1
d.o.o.
CAST Ni Fe B
Electrode with Ni-Fe bimetal core wire for cold welding nodular, grey and malleable cast iron, also suitable for
the rectification an repair of these grades and joining them with steel. Tensile strength is higher than tensile
strength of Ni electrodes. Welding joints are suitable for after treatment.
By using small electrode diameters heat input should be kept low. The weld metal is stronger and more
resistant to impurities than nickel-cored type. It has better welding characteristics than Cast NiFe electrode.
Base materials:
Grey cast iron
Malleable cast iron
Nodular cast iron
Coating type:
Welding current:
Chemical composition, wt %:
Ni
54
Basic
AC
DC -
Welding positions:
Fe
42
Mechanical properties:
Tensile strength
Rm:
Hardness:
Redrying temperature:
450
180
MPa (N/mm )
HB
180C
mm
Approvals:
2.5
3.25
4
REF. E 873 - A / SM
Welding parameters
Length
Current
mm
A
300
350
350
60-80
90-110
130-170
Weight/
packet
kg
5
5
5
Packing
Weight/
Carton
kg
20
20
20
Weight/
1000 pcs
kg *
16.1
31.9
46.8
approximate data
Date:2012-01-09
O8
Classification:
DIN 8573:
E NiFe BG13
AWS A-5.15: E NiFeCl
ISO 1071:
E NiFe BG2
d.o.o.
CAST Ni FeB C
Electrode with Ni-Fe bimetal core for cold welding nodular, grey and malleable cast iron, also suitable for the
rectification on repair of these grades and joining them with steel. Tensile strength is higher than tensile strength
of Ni electrodes. Welding joints are suitable for after treatment.
By using small electrode diameters, heat input should be kept low. The weld metal is stronger and more
resistant to impurities than nickel-cored type. Electrode contents no Ba components.
Base materials:
Heat treatment:
Coating type:
Welding current:
Chemical composition, wt %:
Ni
55
Welding positions:
Mechanical properties:
Basic
AC
DC +
Tensile strength
Rm:
Fe
42
450
N/mm2
Redrying temperature:
200C/1h
Hardness:
190 HB
mm
Approvals:
2.5
3.25
4.00
5.00
REF.E A/SM
Welding parameters
Length
Current
mm
A
300
350
350
350
60-80
90-110
130-170
170-200
Weight/
packet
kg
5
6
6
Packing
Weight/
carton
kg
20
24
24
Weight/
1000 pcs
kg *
16
32
47
approximate data
Date:4.9.2013
O9
Classification:
DIN 8573:
AWS A-5.15:
d.o.o.
E Ni BG 12
E NiFe BG12
E Ni-Cl
E NiFe-Cl
CAST Ni Fe10
Electrode with pure Ni-core wire for cold welding of cast iron and joining cast iron to steel. Specially suited for
welding spheroidal cast iron. Electrode is more resistant to impurities and has good weldability on oily cast iron.
This electrode can be used for combination welding with CAST Ni electrode.
By using small electrode diameters heat input should be kept low. To avoid overheating the seams should not be
longer than 10 times the electrode diameter.
For scoring we suggest our electrode Sekator 2 B or Sekator 2 A, grinding of is not recommended.
Welding joints are suitable for after treatment.
Base materials:
Heat treatment:
Coating type:
Welding current:
Chemical composition, wt %:
C
Fe
1.1
8
Welding positions:
Mechanical properties:
Basic
AC
DC -
Tensile strength
Cu
0.5
Rm:
cca.
Ni
rest
Redrying temperature:
200C/1h
Hardness:
cca.
180 HB
mm
Approvals:
2.5
3.25
4.00
5.00
REF. E868 - A / SM
Welding parameters
Length
Current
mm
A
300
350
350
350
70-100
100-130
130-150
150-170
Weight/
packet
kg
4
4.5
6
Packing
Weight/
carton
kg
16
18
24
Weight/
1000 pcs
kg *
16
32
47
approximate data
Date:2012-01-09
O10
Classification:
DIN 8573:
AWS A-5.15:
EN ISO 1071:
d.o.o.
E Fe-1 S21
E St
EC St 1
CAST Fe
Electrode with iron core wire for cold welding repair on poorly weldable or slag containing old cast iron, nodular,
grey and malleable cast iron, where Ni base electrodes do not give a solid bond. It is specially suitable for
buffering layers before welding them with Cast Ni, Cast NiFe welding consumables.
The weld deposit can be machined by grinding. It is not corrosion resistant.
Base materials:
Heat treatment:
Coating type:
Welding current:
Chemical composition, wt %:
C
Si
0,2
0,1
Welding positions:
Mechanical properties:
Basic
AC
DC +
Hardness:
Mn
0,7
Fe
rest
160 - 200 HB
Redrying temperature:
180C/1h
mm
Approvals:
2.5
3.25
4.00
REF. E 885 - A / M
Welding parameters
Length
Current
mm
A
300
350
350
60-80
90-110
120-140
Weight/
packet
kg
5
6
6
Packing
Weight/
carton
kg
20
24
24
Weight/
1000 pcs
kg *
15
29
approximate data
Date:2010-06-23
O11
Classification:
DIN 8573:
E (FeC-2) BG 49
EN ISO 1071: EC FeC-2-7
d.o.o.
SL 250
Thick coated electrode with mild steel core wire and 200% recovery suitable for welding large sections of
preheated grey cast iron up to the quality of SL 25-type of material. Suitable for reparations of moulds. Weld
material is machinable after slow cooling.
Base materials:
Grey cast iron
Heat treatment:
Coating type:
Welding current:
Chemical composition, wt %:
C
Si
3.2
3.7
Mn
0.6
Ni
0.6
DC +
Welding positions:
Mechanical properties:
Tensile strength
Redrying temperature:
350C / 2h
Hardness:
Rm:
270
MPa (N/mm )
max.250 HB
Metal recovery:
200-210%
Approvals:
mm
2.5
3.25
4.00
5.00
6.00
REF. E 891 - A / SM
Welding parameters
Length
Current
mm
A
300
350
450
450
450
Weight/
packet
kg
Packing
Weight/
carton
kg
Weight/
1000 pcs
kg *
60-80
80-140
110-160
150-210
210-250
approximate data
Date:2010-02-14
O12
Notes:
BRON CuSn . P1
BRON CuAl .. P2
BRON CuMn P3
EL Cu .. P4
ALU 99.5 ... P5
ALU Mn . P6
ALU 5 Si P7
ALU 12 Si .. P8
Classification:
DIN 1733:
AWS A-5.6:
EN ISO 1071:
W.Nr.:
d.o.o.
E CuSn-7
ECuSn-A
E CuSn 2 B 2
2.1025
BRON CuSn
Electrode for welding of Cu and Cu-alloys, cast iron and also joining them with steel. Suitable for repair and
constructions of parts in castings like valves, pumps, housings and bearing surfaces.
Base materials:
Bronze:
Copper
Grey cast iron
CuSn2
CuSn6
G-CuSn10
W.-Nr. 2.1010
2.1020, 2.1030
Heat treatment:
Bigger plates should be preheated to 200-400C. Bronze castings must be cooled slowly.
Coating type:
Welding current:
Chemical composition, wt %:
Cu
Sn
93
6
Mn
0.1
P
0.2
DC +
Welding positions:
Mechanical properties:
Tensile strength
Redrying temperature:
Rm:
Hardness:
300 - 350
MPa(N/mm )
70- 110
HB
300C / 2h
mm
Approvals:
2.5
3.25
4.00
5.00
REF. E 900 - A / SP
Welding parameters
Length
Current
mm
A
300
350
350
450
40-70
80-120
120-150
130-190
Weight/
packet
kg
5
5
5
6
Packing
Weight/
carton
kg
20
20
20
30
Weight/
1000 pcs
kg *
15.8
31.9
47.7
85.7
approximate data
Date:2005-07-08
P1
Classification:
DIN 1734:
AWS A-5.6:
EN ISO 1071:
W.Nr.:
d.o.o.
E CuAl-8
E CuAl-A2
E CuAl 2 B2
2.0326
BRON CuAl
Electrode for welding and surfacing of Al-bronze, for surfacing Al-bronze on steel, for joining steel to copper
and its alloys.
The alloy has high strength, good wear and corrosion resistance, particularly in salt water.
Base materials:
Al-bronze
Copper
Heat treatment:
Coating type:
Welding current:
Chemical composition, wt %:
Cu
90
Al
7
DC +
Welding positions:
Mechanical properties:
Tensile strength
Rm:
480
MPa(N/mm )
Redrying temperature:
Hardness:
300C / 2h
140 - 160 HB
mm
Approvals:
2.5
3.25
4.00
5.00
REF. E 910 - A / SP
Welding parameters
Length
Current
mm
A
300
350
350
450
40-70
80-120
120-150
130-190
Weight/
packet
kg
5
5
5
6
Packing
Weight/
carton
kg
20
20
20
30
Weight/
1000 pcs
kg *
15.8
31.9
47.7
85.7
approximate data
Date:2005-07-08
P2
Classification:
d.o.o.
DIN 1733:
DIN 8555:
AWSA-5.6:
EN ISO 1071:
W.Nr.:
BRON CuMn
ES-CuMn13Al
E 31 200 cn
E CuMnNiAl
E CuAlMn 2 B2
2.1368
Electrode for joining and surfacing of Al-bronze, for welding steel and cast iron to copper and bronze. The welds
are erosion and corrosion resistant specially in seawater. Suitable for welding screws, pumps and pipe line
fittings in the shipbuilding and chemical industry.
Base materials:
Copper alloys with Mn, Ni and Al
Grey cast iron
Low alloyed steels
Heat treatment:
Coating type:
Welding current:
Chemical composition, wt %:
Cu
Mn
Ni
Fe
75
13
2.5
2.5
Al
7.8
DC +
Welding positions:
Mechanical properties:
Tensile strength
Redrying temperature:
Hardness:
MPa(N/mm )
200 - 300 HB
300C / 2h
mm
Approvals:
2.5
3.25
4.00
5.00
REF. E 911 - A / SP
Welding parameters
Length
Current
mm
A
300
350
350
350
40-70
80-120
120-150
130-190
Weight/
packet
kg
5
5
5
6
Packing
Weight/
carton
kg
20
20
20
30
Weight/
1000 pcs
kg *
15.8
31.9
47.7
85.7
approximate data
Date:2005-07-08
P3
Classification:
DIN 1733:
AWS A-5.6:
W.Nr.:
d.o.o.
E CuMn2
E Cu
2.1363
EL Cu
Electrode for welding and cladding on Cu, Cu-alloys and cast iron, and for joining Cu and Copper alloys with
steel.
Base materials :
Copper:
Copper alloys
Grey cast iron
Heat treatment:
Bigger plates should be preheated to 400-600C, after welding easy cooling is recommended.
Coating type:
Welding current:
Chemical composition, wt %:
Cu
Sn
96
0.7
Mn
2.5
Si
0.25
DC +
Welding positions:
Redrying temperature:
Mechanical properties:
Tensile strength
Elongation
Hardness
Rm:
A5:
cca 200
cca 28
cca 100
MPa(N/mm )
%
HB
300C / 2h
Approvals :
/
mm
2.5
3.25
4.00
5.00
Welding parameters
Length
Current
mm
A
300
350
350
350
40-70
80-120
120-150
130-190
Weight/
Packet
kg
4
4.5
4.5
6
Packing
Weight /
carton
kg
20
22.5
22.5
30
Wight /
1000 pcs
kg *
15.8
31.9
47.7
85.7
* approximate data
REF. E 850 - A / MS
Date:2012-01-09
P4
Classification:
DIN1732:
AWS-5.3:
W.Nr.:
d.o.o.
EL-Al 99,5
E 1100
3.0259
ALU 99,5
Electrode for welding pure aluminium and its alloys. Suitable for welding container, apparatus constructions.
Material is corrosion resistant.
Slag residues should be removed to ensure non-corrosive weld beads.
Base materials:
Aluminium and its alloys
Al 99,5 Al 99
Heat treatment:
To obtain welds without pore formation, plates with thickness above 5 mm should be preheated to 200 - 250C.
Coating type:
Welding current:
Chemical composition,wt%
Al
Si
99.5
< 0.3
Fe
< 0.4
DC +
Mechanical properties:
Welding positions:
Yield strength:
Redrying temperature:
100 150C / 1 - 2h
ReL / Rp 0.2:
> 20 MPa(N/mm )
2
Tensile strength:
Rm
> 60 MPa(N/mm )
Elongation
A5:
> 25%
mm
Approvals:
2.5
3.25
4
REF. E
- A / SP
Welding parameters
Length
Current
mm
A
350
350
350
50-90
70-110
90-130
Weight/
packet
kg
2
2
2
Packing
Weight/
carton
kg
8
8
8
Weight/
1000 pcs
kg *
9.4
13.5
19.4
approximate data
Date:2005-07-14
P5
Classification:
DIN1732:
AWS-5.3:
W.Nr.:
d.o.o.
EL-AlMn 1
E 3003
3.5016
ALU Mn
Electrode recommended for welding aluminium- manganese and aluminium magnesium alloys .Suitable for
welding vehicle, container, storage vessel, apparatus construction and seawater resistant welds in the
shipbuilding industry.
Slag residues should be removed to ensure non-corrosive weld beads.
Base materials:
Aluminium alloys with Mn and Mg: AlMn0,6, AlMn1, AlMnCu
AlMgMn,
AlMg1,
AlMg3,
AlMg5
Heat treatment:
To obtain welds without pore formation, plates with thickness above 5 mm should be preheated to 200 - 250C.
Coating type:
Welding current:
Chemical composition,wt%
Al
Mn
97.5
1.2
Si
< 0.5
Fe
< 0.7
DC +
Mechanical properties:
Welding positions:
Redrying temperature:
100-150C/12h
ReL / Rp 0.2:
>
40
MPa(N/mm )
Tensile strength
Rm:
> 100
MPa(N/mm )
Elongation
A5:
>
20
mm
Approvals:
2.5
3.25
4
5
REF. E
- A / M
Yield strength
Welding parameters
Length
Current
mm
A
350
350
350
450
60-90
80-110
110-150
150-180
Weight/
packet
kg
2
2
2
2
Packing
Weight/
carton
kg
8
8
8
8
Weight/
1000 pcs
kg *
9.4
13.5
19.4
40.8
approximate data
Date:2010-06-18
P6
Classification:
DIN1732:
AWS-5.3:
W.Nr.:
d.o.o.
EL-AlSi-5
E 4042
3.2245
ALU 5 Si
Electrode recommended for welding pure aluminium and aluminium alloys with less than 2% of alloying
elements; also suitable for aluminium castings with Si content to 7%.
Slag residues should be removed to ensure non-corrosive weld beads.
Base materials:
Aluminium
Aluminium alloys with < 2% alloying elements
Al-alloy castings <7%
Al Si 5, AlMgSi0.5, AlMgSi0.8, AlMgSi1, AlMg1SiCu, AlCuMg
Heat treatment:
To obtain welds without pore formation, plates with thickness above 5 mm should be preheated to 200 - 250C.
Coating type:
Welding current:
Chemical composition,wt%
Al
Si
94.5
5
Fe
< 0.4
DC +
Mechanical properties:
Welding positions:
Redrying temperature:
100 150 C / 1 - 2h
ReL / Rp 0.2:
> 70
Tensile strength
Rm:
Elongation
A5
> 12
mm
2.5
3.25
4
REF. E
- A / SP
Welding parameters
Length
Current
mm
A
350
350
350
50-90
70-110
90-130
MPa(N/mm )
2
Approvals:
Yield strength
Weight/
packet
kg
2
2
2
Packing
Weight/
carton
kg
8
8
8
Weight/
1000 pcs
kg *
9.4
13.5
19.4
approximate data
Date:2005-07-14
P7
Classification:
DIN1732:
W.Nr.:
d.o.o.
EL-AlSi 12
3.2285
ALU 12 Si
Electrode recommended for welding aluminium alloys and aluminium castings with Si content to 12%. Suitable
for repair purposes.
Slag residues should be removed to ensure non-corrosive weld beads.
Base materials:
Aluminium alloys G-AlSi12, G-AlSi12(Cu), G-AlSi11
G-AlSi8Cu3, G-AlMg3Si
Heat treatment:
To obtain welds without pore formation, plates with thickness above 5 mm should be preheated to 200 - 250C.
Coating type:
Welding current:
Chemical composition,wt%
Al
Si
87.5
12
Fe
< 0.5
DC +
Mechanical properties:
Welding positions:
Redrying temperature:
100 150 C / 1 - 2h
ReL / Rp 0.2:
cca. 80
Tensile strength
Rm:
Elongation
A5
cca. 13
mm
2.5
3.25
4
REF. E
A / SP
Welding parameters
Length
Current
mm
A
350
350
350
50-90
70-110
90-130
MPa(N/mm )
2
Approvals:
Yield strength
Weight/
packet
kg
2
2
2
Packing
Weight/
carton
kg
8
8
8
Weight/
1000 pcs
kg *
9.4
13.5
19.4
approximate data
Date:2005-07-08
P8
Notes:
ELECTRODES FOR
d.o.o.
SEKATOR 1 .. Q1
SEKATOR 2 A .. Q2
SEKATOR 2 B .. Q3
TERMO Q4
Classification:
d.o.o.
SEKATOR 1
Flux coated electrode for cutting of all types of steels, cast iron, iron, copper and its alloys.
WARNING: In small welding rooms the ventilation of air is requested!
Base materials:
Cast iron
Copper
Copper alloys
Aluminium
Steels
Coating type:
acid
Welding current:
AC
DC -
Welding positions:
mm
Approvals:
3.25
4
5
REF. E 173 - A / M
350/450
350/450
450
130-200
180-250
250-350
Weight/
Packet
kg
4.4/6
4.4/6
6
Packing
Weight/
carton
kg
22/30
22/30
30
Weight/
1000 pcs
kg *
36
55
111
approximate data
Date:2012-01-09
Q1
Classification:
d.o.o.
SEKATOR 2A
Flux coated electrode for cutting and gouging of all types of steel, cast iron, copper and its alloys.
WARNING: In small welding rooms the ventilation of air is requested!
Base materials:
Cast iron
Copper
Copper alloys
Aluminium
Aluminium alloys
Steels
Coating type:
acid
Welding current:
AC
DC -
Welding positions:
mm
Approvals:
2.5
3.25
4
5
REF. E 018 - A / MS
350
350
350
450
100-160
130-200
180-250
250-350
Weight/
Packet
kg
3.4
5.2
5.2
Packing
Weight/
carton
kg
17
26
26
Weight/
1000 pcs
kg *
28.2
52.5
106.1
approximate data
Date:2012-01-09
Q2
Classification:
d.o.o.
SEKATOR 2B
Flux coated electrode for cutting and gouging of all types of steel, cast iron, copper and its alloys.
WARNING: In small welding rooms the ventilation of air is requested!
Base materials:
Cast iron
Copper
Copper alloys
Aluminium
Aluminium alloys
Steels
Coating type:
acid
Welding current:
AC
DC -
Welding positions:
mm
Approvals:
2.5
3.25
4
5
REF. E 016 - A / MS
350
350
350
450
100-160
130-200
180-250
250-350
Weight/
Packet
kg
3.8
3.5
3.5
5.2
Packing
Weight/
carton
kg
19
17.5
17.5
26
Weight/
1000 pcs
kg *
19.5
28.2
52.5
106.1
approximate data
Date:2012-01-09
Q3
Classification :
d.o.o.
TERMO
Special preheating electrode suitable for local preheating of small and middle sized pieces. It can be used
instead of oxy- acetilene preheating in workshops and repair activities, mostly for preheating, local PWHT of
welds, preheating before bending or levelling.No weld metal is produced, the slag can be easily removed.
Needs higher current sets, the arc should be upright with 15-30mm length.
Base materials:
steels
cast iron
copper
copper alloys
aluminium
aluminium alloys
Coating type :
special
Welding current :
AC
DC +/ -
Welding positions :
Welding parameters
Length
Current
mm
A
mm
2.5
3.25
4
350
450/350
450/350
70-120
100-150
150-240
Weight/
Packet
kg
Packing
Weight /
cartoon
kg
4
5.2
20
26
Weight /
1000 pcs
kg *
48
73
* approximate data
REF. E 020- A / M
Datum:2005-07-08
Q4
Notes:
d.o.o.
AR 18.5 R1
AR D1 .. R2
AR 18.1 R3
AB 100 . R4
FB TT .. R5
FB 12.2 R6
FB CrNi R7
CS Cr 6 R8
CS CrNi ... R9
AB Cr R10
CS 350 . R11
FB 33 . R12
AB 123 ... R13
MS 200.R14
Classification:
AR 18.5
d.o.o.
EN ISO 14174
EN ISO 14171-A
EN ISO 14171-A
EN ISO 14171-A
EN ISO 14171-A
SA AR 1 88 AC
S 42 0 AR S2
S 46 0 AR S2Mo
S 3T 0 AR S2
S 4T 0 AR S2Mo
ASME/AWS A5.17
A5.23
F7A0-EM12K
F7A0-EA2-A2
It's an aluminate-rutil type flux for welding general structural steels, pressure vessel steels and pipe steels as
2
well as fine grain steels with a yield strength of up to 355 N/mm . Its suited for high-speed welding with the
twin-wire process, as well as to tandem and multi-wire welding. It can be used also for welding with the tworun technique. Its also particularly useful for welding tube-web-tube joints of finned tubes. Because of its
good slag detachability theres a common application for the welding of fillets. The weld metal isnt
susceptible to porosity when welding surface contaminated by rust, scale
3
Grain size: 0.2 1.6 mm, Density: 1.5 kg/dm
BASE MATERIALS
DIN
General structural St37-2 to RSt37-2
steel
St44-2, St44-3
St52-3
Pipe steel
StE210.7 to StE290.7,
StE320.7, StE360.7
St35 to St45.8
St52, St52-4
Boiler steel
HI, HII,
17Mn4, 19Mn5
15Mo3
Shipbuilding steel
A,B,D
Fine-grain steel
StE255 to StE355
W.Nr.
1.0037 to 1.0038
1.0044, 1.0144
1.0570
1.0307 to 1.0484
1.0409, 1.0582
1.0308 to 1.0405
1.0580, 1.0581
1.0345, 1.0426
1.0481,1.0482
1.5415
1.0440, 1.0472,
1.0461, 1.0562,
Al2O3 + MnO
55 %
C
0.06
0.06
Mechanical properties
Wire
ReL / Rp 0.2 MPa
2
(N/mm )
EPP 2
>420
EPP 2 Mo
>440
Si
0.60
0.60
Mn
1.45
1.45
Rm MPa (N/mm )
530 - 630
580 - 680
A5 (%)
>24
>22
Mo
/
0.50
KV (J)
0
> 47
> 47
REF. A / CJ
Date: 2013-06-25
R1
Classification:
AR D1
d.o.o.
EN ISO 14174
EN ISO 14171-A
EN ISO 14171-A
EN ISO 14171-A
EN ISO 14171-A
SA AR 1 97 AC
S 42 0 AR S2
S 46 0 AR S2Mo
S 3T 0 AR S2
S 4T 0 AR S2Mo
ASME/AWS A5.17
A5.23
F7A0-EM12K
F7A0-EA2-A2
It's an aluminate-rutil type flux for welding general structural steels, pressure vessel steels and pipe steels as
2
well as fine grain-steels with a yield strength of up to 355 N/mm . Its suited for twin-wire, tandem and
multi-wire welding at high-speeds. It can be used also with the two-run technique, especially when welding
thin-walled spiral tubes. Wires containing Mo increase the weld-metal toughness. It may equally well be used
for welding tube-web-tube joints or finned tubes. Because of its good slag removal its very commonly
used when welding fillets. The weld metal isnt susceptible to porosity when welding on surface
contaminated by rust, scale
3
Grain size: 0.2 1.6 mm, Density: 1.6 kg/dm
BASE MATERIALS
DIN
General structural St37-2 to RSt37-2
steel
St44-2, St44-3, St52-3
Pipe steel
StE210.7 to StE290.7,
StE320.7, StE360.7
St35 to St45.8
St52, St52-4
Boiler steel
HI, HII,
17Mn4, 19Mn5
15Mo3
Shipbuilding steel
A,B,D
Fine-grain steel
StE255 to StE355
W.Nr.
1.0037 to 1.0038
1.0044, 1.0144 1.0570
1.0307 to 1.0484
1.0409, 1.0582
1.0308 to 1.0405
1.0580, 1.0581
1.0345, 1.0426
1.0481,1.0482
1.5415
1.0440, 1.0472,
1.0461, 1.0562,
Al2O3 + MnO
55 %
Si
0.60
0.60
Mechanical properties
Wire
ReL / Rp 0.2
2
MPa(N/mm )
EPP 2
>400
EPP 2 Mo
>450
Mn
1.35
1.35
Rm MPa(N/mm )
500 - 600
580 - 680
Mo
/
0.50
A5 (%)
KV (J)
0
>47
>47
>22
>18
REF. A / CJ
CRS
1YTM
ABS
2YTM
BV
A2YTM
GL
1YTM
LR
1YTM
Date: 2013-06-25
DNV
IIYTM
S
*
TV
*
DB
*
R2
Classification:
AR 18.1
d.o.o.
EN ISO 14174
EN ISO 14171-A
EN ISO 14171-A
EN ISO 14171-A
EN ISO 14171-A
SA AR 1 88 AC H5
S 42 0 AR S2
S 46 0 AR S2Mo
S 3T 0 AR S2
S 4T 0 AR S2Mo
ASME/AWS A5.17
A5.23
F7A2-EM12K
F8A2-EA2-A2
It's an aluminate-rutil type flux for welding general structural steels, pressure vessel steels and pipe steels as
2
well as fine grain-steels with a yield strength of up to 355 N/mm . Its suited for twin-wire, tandem and
multi-wire welding at high-speeds. Its ekspecially well used for two-run technique and fillets, for example for
production of large pipes and thin- walled spiral tubes. Because of its good slag-detachability its very
commonly used when welding fillets.
3
Grain size: 0.2 1.6 mm, Density: 1.6 kg/dm
BASE MATERIALS
DIN
General structural St37-2 to RSt37-2
steel
St44-2, St44-3, St52-3
Pipe steel
StE210.7 to StE290.7,
StE320.7, StE360.7
St35 to St45.8
St52, St52-4
Boiler steel
HI, HII,
17Mn4, 19Mn5
15Mo3
Shipbuilding steel
A,B,D
Fine-grain steel
StE255 to StE355
W.Nr.
1.0037 to 1.0038
1.0044, 1.0144 1.0570
1.0307 to 1.0484
1.0409, 1.0582
1.0308 to 1.0405
1.0580, 1.0581
1.0345, 1.0426
1.0481,1.0482
1.5415
1.0440, 1.0472,
1.0461, 1.0562,
Al2O3 + MnO
55 %
Mechanical properties
Wire
ReL / Rp 0.2
2
MPa(N/mm )
EPP 2
>450
EPP 2 Mo
>490
Si
0.70
0.70
Rm MPa(N/mm )
530 630
610 - 710
Mn
1.40
1.40
Mo
/
0.50
A5 (%)
KV (J)
0
>47
>47
>22
>18
REF. A / CJ
CRS
2YTM
ABS
2YTM
BV
A2YTM
GL
2YTM
Date: 2013-06-25
LR
2TM,2YTM
DNV
IIYTM
S
*
R3
Classification:
AB 100
d.o.o.
EN ISO 14174
EN ISO 14171-A
EN ISO 14171-A
EN ISO 14171-A
EN ISO 14171-A
EN ISO 14171-A
SA AB 1 76 AC
S 42 0 AB S2
S 46 0 AB S3
S 46 0 AB S2Mo
S 2T 0 AB S2
S 3T 0 AB S3
ASME/AWS A5.17
A5.17
A5.23
F6A2-EM12K
F7A4-EM13K
F7A4-EA2-A2
It's an aluminate-basic type flux for welding general structural steels, pressure vessel steels, pipe steels as
2
well as fine-grain steels with a yield strength of up to 430 N/mm . It can be used for single-wire and multiwire welding as well as when welding with the two-run technique. The slag removes easily.
3
Grain size: 0.2 1,8 mm Density: 1.3 kg/dm
BASE MATERIALS
DIN
General structural St37-2, USt37-2
steel
RSt37-2, St37-3
St44-2,St44-3,St52-3
Pipe steel
StE210.7, StE240.7,
StE320.7 to StE360.7
St35 to St35.8
St45 to St52-4
Boiler steel
HI, HII,
17Mn4, 19Mn5, 15Mo3
Shipbuilding steel
A to E
Fine-grain steel
StE255, WStE255,
StE285, WStE285
StE315, WStE315
StE355, WStE355
StE380, WStE380,
StE420, WStE420
W.Nr.
1.0037, 1.0036
1.0038, 1.0116
1.0044, 1.0144
1.0307 to 1.0457
1.0409 to 1.0582
1.0308, 1.0309
1.0408 to 1.0581
1.0345, 1.0426,
1.0481, 1.0482, 1.5415
1.0440 to 1.0476
1.0461, 1.0462,
1.0486, 1.0487,
1.0505, 1.0506,
1.0562, 1.0565
1.8900, 1.8930,
1.8902, 1.8932
Si
0.40
0.40
0.45
Mn
1.20
1.20
1.50
2
Rm MPa(N/mm )
500-600
540-640
520-620
Mo
/
0.50
/
A5 (%)
KV (J)
0
> 47
> 47
> 47
>24
>22
>20
REF. A / CJ
CRS
2TM
2YTM
ABS
2TM
2YTM
BV
A2TM
A2YTM
GL
2TM
2YTM
Date: 2013-06-25
LR
2TM
2M, 2YM
DNV
IITM
IIYTM
S
*
*
R4
Classification:
FB TT
d.o.o.
EN ISO 14174
EN ISO 14171-A
EN ISO 14171-A
EN ISO 14171-A
SA FB 1 55 AC H5
S 35 4 FB S2
S 42 5 FB S3
S 50 4 FB S2Mo
ASME/AWS A5.17
A5.17
A5.23
F6A4-EM12K
F7A6-EM13K
F8A6-EA2-A2
It's a fluorid-basic type flux most suited to welded joints on high-tensile, fine-grain steels as well as steels
are tough at sub-zero temperatures and resistant to ageing. Its particularly well-suited for welding with
tandem and multi-wire processes, but not for two-run technik. Its also suitable for production welding
offshore components. The resulting slag is short allowing circumferential welding. Regularly shaped welds
are deposited without of area or interface notches.
3
Grain size: 0.2 1,8 mm, Density: 1.2 kg/dm
BASE MATERIALS
Shipbuilding steel
Fine-grain steel
DIN
A,B,D,E,
StE255 to StE420
WStE255 to WstE420
StE460, WStE420
StE500, WStE500
TStE255 to TStE420
TStE460, TStE500
Boiler steel
15Mo3
13CrMo44
10CrMo910
12CrMo195
Low temperature steel 10Ni14
TTSt35N,TTSt35V
Ageing resistant steel TTSt41N,TTSt41V
ASt35,Ast41
ASt45,ASt52
W.Nr.
1.0440 to 1.0476
1.0461 to 1.8902
1.0462 to 1.8932
1.8905, 1.8935
1.8907, 1.8937
1.0463 to 1.8912
1.8915, 1.8917
1.5415
1.7335
1.7380
1.7362
1.5637
1.0346,1.0426
1.0436, 1.057
Its suitable for welding in combination with flux-cored wires (f. e. fine-grain steels.)
Chemical composition of flux
SiO2 + TiO2
15 %
CaO + MgO
40 %
Mechanical properties
WIRE
ReL / Rp
EPP 2
EPP 3
EPP 2 Mo
0.2
Si
0.20
0.25
0.20
Mn
0,9
1,2
0,9
MPa(N/mm )
>330
>430
>500
MPa(N/mm )
450 - 550
530 630
580 680
A5 (%)
>28
>22
>20
Mo
Ni
0.50
20
>160
>160
>120
KV (J)
-20
-40
>80
>30
>80
>70
>80
>50
0
>140
>140
>100
-60
>30
>30
REF. A / CJ
CRS
3M
3YM
3YM
ABS
3M
3YM
3YM
BV
A3M
A3YM
A3YM
GL
3M
3YM
3YM
LR
3M
3M,3YM
Date: 2013-06-25
DNV
IIIM
IIIYM
IIIYM
S
*
*
*
DB
*
*
TV
*
*
*
R5
Classification:
d.o.o.
FB 12.2
EN ISO 14174
EN ISO 14171-A
EN ISO 14171-A
EN ISO 14171-A
EN ISO 14171-A
SA FB 1 65 AC H5
S 35 2 FB S2
S 42 4 FB S3
S 46 2 FB S2Mo
S 3T 0 FB S3
ASME/AWS A5.17
A5.17
A5.23
F6A4-EM12K
F7A6-EM13K
F7A4-EA2-A2
It's an aluminate-basic type flux for welding general structural steels, pressure wessel steels, pipe steels and
2
fine-grain steels with a yield strength of up to 430 N/mm . It can be used for single-, twin-, or multiwire welding as well as when welding with the two-run technique. Its suitable for production of large pipes.
The slag removes easily.
3
Grain size: 0.2 1,8 mm, Density: 1.2 kg/dm
BASE MATERIALS
DIN
W.Nr.
General structural St37-2, RSt37-3
1.0037,
steel
RSt37-3, St44-3
1.0144
St52-3
1.0570
Pipe steel
StE210.7 to StE290.7
1.0307 to 1.0484
StE320.7 to StE385.7
1.0409 to 1.8970
StE415.7 to StE480.7
1.8972 to 1.8977
St35 to St45.8
1.0308 to 1.0405
St52, St52-4
1.0580, 1.0581,
API X42 to X70
Boiler steel
HI, HII,
1.0345, 1.0425
19Mn5
1.0482
15Mo3
1.5415
Fine-grain steel
StE255 to StE315
1.0461 to 1.0505
WStE255 to WStE315
1.0462 to 1.0506
StE355, WStE355
1.0562, 1.0565
StE380, WStE380,
1.8900, 1.8930
StE420, WStE420
1.8902, 1.8932
Its suitable for welding and surfacing in combination with flux-cored wires (f. e. fine-grain steels.)
Mn
1,10
1,10
1,50
20
>150
Mo
/
0.50
/
0
>110
-20
>90
KV (J)
-40
EPP2Mo
>430
550 650
>20
>90
>90
>70
>40
EPP 3
>400
530 630
>24
>160
>130
>100
>70
-60
>30
REF. A / CJ
ABS
BV
GL
LR
DNV
2YT,3YM
A3YM
3YM
3M,3YM
IIYT,IIIYM
Date: 2013-06-25
TV
*
R6
Classification:
EN ISO 14174
d.o.o.
SA FB 2 5635 DC
FB CrNi
It's a special fluorid-basic type flux for welding stainless and heat-resistant steels, also ELC quality. In
conjunction with wire electrodes to EN ISO 14343 its used for welding of stainless and heat resistant steels.
3
Grain size: 0.2 1,8 mm, Density: 1.4 kg / dm .
BASE MATERIAL
W.n.
WELDING WIRE
W.Nr.
X 2 Cr Ni 19 11
X 5 CrNi 18 10
1.4306
1.4301
EPP 19/9 NC
EPP 19/9 NC
1.4316
1.4316
X 6 Cr NiTi 18 10
X 5 Cr Ni Nb 18 9
X 6 Cr Ni Nb 18 10
X 12 Cr Ni Ti 18 9
1.4541
1.4543
1.4550
1.4878
EPP 19/9 Nb
EPP 19/9 Nb
EPP 19/9 Nb
EPP 19/9 Nb
1.4551
1.4551
1.4551
1.4551
X 2 Cr Ni Mo 17 13 2
X 2 Cr Ni Mo 18 14 3
X 5 Cr Ni Mo 17 12 2
1.4404
1.4435
1.4401
EPP 19/12/3 NC
EPP 19/12/3 NC
EPP 19/12/3 NC
1.4430
1.4430
1.4430
X 6 Cr Ni Mo Ti 17 12 2
X 10 Cr Ni Mo Ti 18 12
X 6 CrNiMoNb 17 12 2
X 10 CrNiMoNb 18 12
1.4571
1.4573
1.4580
1.4583
EPP 19/12/3 Nb
EPP 19/12/3 Nb
EPP 19/12/3 Nb
EPP 19/12/3 Nb
1.4576
1.4576
1.4576
1.4576
Cr
18
18
18
18
Ni
9
9
10
10
2
MPa(N/mm )
> 550
> 575
> 550
> 600
Welding current:
DC+, up to 800 A
Redrying temperature:
350C / 2 h
Mo
2.5
2.5
A5 (%)
> 35
> 30
> 30
> 30
Nb
> 8 xC
> 8 xC
KV (J)
20 C
> 75
> 65
> 75
> 65
REF.A / CJ
Date: 2013-06-25
R7
Classification:
EN ISO 14174
d.o.o.
SA CS 1 96 AC
CS Cr 6
It's a calcium-silicate flux for hardsurfacing with wires and flux-cored wires or strips. Its suitable for high
current, up to 1200 A. Slag detachability is good also from hot plates.
3
Grain size: 0.2 1.6 mm, Density: 1.4 kg / dm
C
0.08
Si
0.70
Mn
1.0
Welding current:
Redrying temperature:
350C / 2 h
Cr
5.0
Mo
0.9
HARDNESS HB
350 - 400
REF. A / CJ
Date: 2013-06-25
R8
Classification:
EN ISO 14174
SA CS 2 4994 AC
CS CrNi
d.o.o.
Its an agglomerated flux for joint welding or cladding with Cr CrNi and CrNiMo wires or strips. Its suitable
for cladding in chemical and petrochemical industry. The flux for cladding can be also used on DC-current.
3
Grain size: 0.2 1,8 mm, Density: 1.4 kg / dm .
BASE MATERIAL
W.n.
WELDING WIRE
W.Nr.
X 2 Cr Ni 19 11
X 5 CrNi 18 10
1.4306
1.4301
EPP 19/9 NC
EPP 19/9 NC
1.4316
1.4316
X 6 Cr NiTi 18 10
X 5 Cr Ni Nb 18 9
X 6 Cr Ni Nb 18 10
X 12 Cr Ni Ti 18 9
1.4541
1.4543
1.4550
1.4878
EPP 19/9 Nb
EPP 19/9 Nb
EPP 19/9 Nb
EPP 19/9 Nb
1.4551
1.4551
1.4551
1.4551
X 2 Cr Ni Mo 17 13 2
X 2 Cr Ni Mo 18 14 3
X 5 Cr Ni Mo 17 12 2
1.4404
1.4435
1.4401
EPP 19/12/3 NC
EPP 19/12/3 NC
EPP 19/12/3 NC
1.4430
1.4430
1.4430
X 6 Cr Ni Mo Ti 17 12 2
X 10 Cr Ni Mo Ti 18 12
X 6 CrNiMoNb 17 12 2
X 10 CrNiMoNb 18 12
1.4571
1.4573
1.4580
1.4583
EPP 19/12/3 Nb
EPP 19/12/3 Nb
EPP 19/12/3 Nb
EPP 19/12/3 Nb
1.4576
1.4576
1.4576
1.4576
CaO + MgO
25 %
Al2O3 + MnO
25 %
Cr
18
18
18
18
CaF2
10%
Ni
9
9
10
10
2
Rm MPa(N/mm )
> 550
> 575
> 550
> 600
Welding current:
Redrying temperature:
350C / 2 h
Mo
2.5
2.5
A5 (%)
> 35
> 30
> 30
> 30
Nb
> 8 xC
> 8 xC
KV (J)
20 C
> 55
> 45
> 55
> 45
REF. A / CJ
Date: 2013-06-25
R9
Classification:
EN ISO 14174
d.o.o.
SA AB 2B 5654 AC
AB Cr
It's an aluminate-basic type flux for submerged-arc cladding with Cr, CrNi and CrNiMo strips and unalloyed
SA-wires. It s suitable for corrosion and wear resistant parts. Surface is smooth and flat.
3
Grain size: 0.2 1,8 mm, Density: 1.3 kg / dm .
Cr
17.5
16.5
-
Ni
6.0
-
Hardness
180 - 220 HB
160 - 200 HB
200 - 250 HB
Redrying temperature:
350C / 2 h
REF. A / CJ
Date: 2013-06-25
R 10
Classification:
EN ISO 14174
d.o.o.
SA CS 3 C 0,2 Cr3 AC
CS 350
It's an agglomerated alloy-fortified surfacing flux intended for use with low-alloyed SA-wires. The alloying
effect is greatly depended on welding parameters. The optimum parameters with wire 4 mm are: 600 A,
32 V, 50 cm/min. Its suitable for wear- and strike- resistant parts (for example for welding of coupling
parts, piston rod ends and excavator parts). The greater hardness is reached with Mn, Cr and Mo alloyed
wires.
3
Grain size: 0.2 2 mm, Density: 1.2 kg / dm .
Mo
0.40
0.40
Hardness
350 - 400 HB
400 - 500 HB
Redrying temperature:
350C / 2 h
REF. A / CJ
Date: 2013-06-25
R 11
Classification:
EN ISO 14174
SA FB 2 5635 DC
FB 33
d.o.o.
Its a fluorid-basic flux for welding stainless, heat-resistant and nc-steels in conjunction with wires to EN ISO
14343. Welds are clean and have smooth surface. Theres good slag detachability so its suitable for
welding fillets.
3
Grain size: 0.2 1.6 mm, Density: 1.4 kg / dm
Base materials
W.n.
W.n.
X 2 Cr Ni 19 11
X 5 CrNi 18 10
1.4306
1.4301
EPP 19/9 NC
EPP 19/9 NC
1.4316
1.4316
X 6 Cr NiTi 18 10
X 5 Cr Ni Nb 18 9
X 6 Cr Ni Nb 18 10
X 12 Cr Ni Ti 18 9
1.4541
1.4543
1.4550
1.4878
EPP 19/9 Nb
EPP 19/9 Nb
EPP 19/9 Nb
EPP 19/9 Nb
1.4551
1.4551
1.4551
1.4551
X 2 Cr Ni Mo 17 13 2
X 2 Cr Ni Mo 18 14 3
X 5 Cr Ni Mo 17 12 2
1.4404
1.4435
1.4401
EPP 19/12/3 NC
EPP 19/12/3 NC
EPP 19/12/3 NC
1.4430
1.4430
1.4430
X 6 Cr Ni Mo Ti 17 12 2
X 10 Cr Ni Mo Ti 18 12
X 6 CrNiMoNb 17 12 2
X 10 CrNiMoNb 18 12
1.4571
1.4573
1.4580
1.4583
EPP 19/12/3 Nb
EPP 19/12/3 Nb
EPP 19/12/3 Nb
EPP 19/12/3 Nb
1.4576
1.4576
1.4576
1.4576
Al2O3 + MnO
35 %
Cr
18
18
18
18
Ni
9
9
10
10
2
Rm MPa(N/mm )
> 550
> 575
> 550
> 600
Welding current:
DC+, do 800 A
Redrying temperature:
350C / 2 h
Mo
2.5
2.5
A5 (%)
> 35
> 30
> 30
> 30
Nb
> 8 xC
> 8 xC
KV (J)
+20 C
> 75
> 65
> 75
> 65
REF. A / CJ
TV
*
Date: 2013-06-25
R 12
Classification:
AB 123
d.o.o.
EN ISO 14174
EN ISO 14171-A
EN ISO 14171-A
EN ISO 14171-A
EN ISO 14171-A
EN ISO 14171-A
SA AB 1 67 AC H5
S 38 4 AB S2
S 42 4 AB S3
S 42 4 AB S2Mo
S 3T 2 AB S2
S 3T 2 AB S3
ASME/AWS A5.17
A5.17
A5.23
F6A4-EM12K
F7A4-EM13K
F7A4-EA2-A2
It's an aluminate-basic type flux for welding general structural steels, pressure wessel steels, pipe steels as
well as fine-grain steels. It can be used for single-wire and multi-wire welding as well as when welding with the
two-run technique. The slag removes easily.
3
Grain size: 0.2 1,8 mm Density: 1.3 kg/dm
BASE MATERIALS
Shipbuilding steel
Fine-grain steel
Boiler steel
DIN
A,B,D,E,
StE255 to StE420
WStE255 to WstE420
StE460, WStE420
StE500, WStE500
TStE255 to TStE420
TStE460, TStE500
15Mo3
13CrMo44
10CrMo910
12CrMo195
TTSt41N,TTSt41V
ASt35,Ast41
ASt45,ASt52
1.0346,1.0426
1.0436, 1.057
CaO + MgO
30 %
W.Nr.
1.0440 to 1.0476
1.0461 to 1.8902
1.0462 to 1.8932
1.8905, 1.8935
1.8907, 1.8937
1.0463 to 1.8912
1.8915, 1.8917
1.5415
1.7335
1.7380
1.7362
Al2O3 + MnO
30 %
Si
Mn
Cr
EPP 2
0,06
0,20
1,30
EPP 3
0,06
0,20
1,60
EPP 2 Mo
0,06
0,20
1,30
Mechanical properties
Wire
ReL / Rp 0.2
MPa(N/mm2)
CaF2
15%
Ni
Mo
/
0,50
Rm MPa(N/mm2)
A5(%)
Av (-40C)
EPP 2
> 380
510- 610
> 22
> 47
EPP 3
> 430
530- 630
> 22
> 47
EPP 2 Mo
> 430
550- 650
> 20
> 47
Hardsurfacing properties
Wire
FILTUB DUR 212
FILTUB DUR Cr12Ni2Mo
FILTUB DUR 205
Si
Mn
Cr
0,10
0,08
0,40
0,40
1,40
1,50
5,0
9,0
0,18
0,50
1,50
2,6
Ni
Mo
1,50
0,90
0,90
40 HRC
40 HRC
HARDNESS
0,50
350 HB
REF. A / CJ
TV
*
*
*
Date: 2013-06-25
R 13
Classification:
d.o.o.
EN ISO 14174
EN ISO 14171-A
SA MS 1 88 AC
S 38 2 MS S2
ASME/AWS A5.17
F7A2-EM12K
MS 200
It's a Manganese-silicate type flux with high current capacity designed for welding general structural steels,
pressure vessel steels, pipe steels so as ship plates. It is active flux that can be used for single and multi-pass
welding of mild and medium alloyed steels. It has high current capacity and high resistance towards cracks.
The slag removes easily.
3
Grain size: 0.2 1,8 mm Density: 1.3 kg/dm
BASE MATERIALS
DIN
General structural St37-2 do RSt37-2
steel
St44-2, St44-3, St52-3
Pipe steel
StE210.7 do StE290.7,
StE320.7, StE360.7
St35 do St45.8
St52, St52-4
Boiler steel
HI, HII,
17Mn4, 19Mn5
15Mo3
Shipbuilding steel
A,B,D
Fine-grain steel
StE255 do StE355
W.Nr.
1.0037 do 1.0038
1.0044, 1.0144 1.0570
1.0307 do 1.0484
1.0409, 1.0582
1.0308 do 1.0405
1.0580, 1.0581
1.0345, 1.0426
1.0481,1.0482
1.5415
1.0440, 1.0472,
1.0461, 1.0562,
Mechanical properties
Wire
ReL / Rp 0.2
MPa(N/mm2)
EPP 2
> 380
Si
0,60
Mn
1,4
Rm
MPa(N/mm2)
> 500
P
< 0,03
A5(%)
> 22
S
< 0,025
Av (-40C)
> 47
REF. A / CJ
Date: 2013-06-25
R 14
Notes:
/ MIG Mo ...................... S1
TIG CrMo
/ MIG CrMo S2
TIG 19/9 NC Si /
TIG 18/8/6 Si /
TIG 25/20 /
TIG 29/9 /
TIG 70/15 /
TIG 22/9/3 LN /
TIG 625 /
TIG Cu
/ MIG Cu . S24
Classification:
EN 1668
EN 12070
DIN 8575
AWS A5.28:
EN 440
W. Nr.
EN ISO 636-A
EN ISO 636-B
EN ISO 21952-A
EN ISO 21952-A
EN ISO 21952-B
EN ISO 21952-B
TIG Mo
MIG Mo
d.o.o.
W 2Mo
W Mo Si
G Mo Si
SG Mo
ER 70 S-A1
G2 Mo
1.5424
W 46 2 W2Mo
W 55 2 W2M3
W MoSi
G MoSi
W 1M3
G 1M3
With Mo-alloyed rod and wire for welding of heat-resistant, unalloyed and low-alloyed structural steels with
2
tensile strenght up to 590 N/mm . Its well used for welding pipe-lines, high-pressure boilers, armour parts
and for repairing in thermo-energetic devices. It can be used up to process-temperature of 500C.
Base materials
DIN
W.n.
St37 St42
St35.8, St45.8 15Mo3
HI - HIII, 17Mn4
1.0038 - 1.0570
1.0305, 1.0405, 1.5415
1.0345 - 1.0435, 1.0481
Si
0,60
Mn
1,15
Mo
0,50
Mechanical properties
2
Rm MPa(N/mm )
560 - 720
Suitable shielding
gases
TIG-process
MIG- process
A5 (%)
> 22
KV -20C(J)
>47
1,6;
0,8 ;
Form of delivery:
Approvals:
REF. A / CJ
2,0;
1,0;
2,5; 3,0;
1,2 ; 1,6 ;
( mm )
( mm )
lenght:: 1000 mm
TV, DB, CR, BV, DNV, LR, RINA, S (for TIG Mo)
TV, DB, (for MIG Mo)
Date: 2013-06-27
S1
Classification:
EN 12070:
TIG CrMo
MIG CrMo
d.o.o.
DIN 8575
AWS A5.28:
W.Nr.
EN ISO 21952-A
EN ISO 21952-B
W CrMo1Si
G CrMo1Si
SG CrMo1
ER 80 S-G
1.7339
W CrMo1Si
G CrMo1Si
W 1CM3
DIN
15CrMo3
13CrMo44
W.Nr.
1.5415
1.7335
Si
0,60
Mn
1,00
Cr
1,2
Mo
0,52
Mechanical properties
2
Suitable shielding
gases
TIG-process
MIG- process
2,0;
0,8;
Form of delivery:
Approvals:
REF. A / CJ
2,4;
1,0;
KV +20C(J)
> 100
3,0;
1,2 ;
1,6
( mm )
( mm )
lenght:: 1000 mm
Date: 2013-06-26
S2
Classification:
EN 12070
TIG 2CrMo
MIG 2CrMo
d.o.o.
DIN 8575
AWS A5.28:
W.Nr
EN ISO 21952-A
EN ISO 21952-B
W CrMo2 Si
G CrMo2 Si
SG CrMo2
ER 90S-G
1.7384
W CrMo2Si
G CrMo2Si
W 2C1M3
DIN
10CrMo 9-10
10CrSiMoV44
W.Nr.
1.7380
1.8075
Si
0,60
Mn
0,92
Cr
2,45
Mo
1,00
Mechanical properties
2
Suitable shielding
gases
TIG-process
MIG- process
KV +20C(J)
> 100
2,0;
0,8;
Form of delivery:
Approvals:
REF. A / CJ
2,4;
1,0;
3,2;
1,2 ;
1,6
( mm )
( mm )
Date: 2013-06-26
lenght:: 1000 mm
S3
Classification:
d.o.o.
VAC 60
TIG VAC 60
EN 440
EN 1668
DIN 8559
W.Nr
ASME/AWS SFA A5.18
EN ISO 636-A
EN ISO 636-B
EN ISO 14341-A
EN ISO 14341-B
G 42 5 C/M G3Si1
W 42 5 W3Si1
SG 2
WSG 2
1.5125
ER 70 S-6
W 42 5 W3Si1
W 49 5 WE
G42 5M/C G3Si1
G 49A 5 M/C G6
Base materials:
SIST EN
S185 - E335
S235N - S355N
P255NH - P355NH
S420ML
P235GH, P265GH
P295GH, P355GH
P235G1TH - P355T2
L210 - L360GA
L240NB - L415NB
S235JRS2-S235J4S
S310G1S S355G2S
GE200 GE260
Unalloyed steel
Fine-grained steel
Boiler plate and
vessel plate
Pipe steel
Shipbuilding steel
Cast steel
DIN
St 33 - St 60.2
St E 255 - St E 355
W St E 255 - W St E 355
TStE 420 TM
H I, H II,
17Mn4, 19Mn5
St 35 - St 52.4
St E 210.7
StE290.7 StE415.7
GL-A, do GL-E
GL-A32 do GL-D36
GS-38 do GS-52
W.Nr.
1.0035, 1.0060
1.0461, 1.0545
1.0462, 1.0565
1.8836
1.0345, 1.0425
1.0481, 1.0473
1.0308, 1.0581
1.0307, 1.0499
1.0484, 1.8972
1.0441, 1.0476
1.0513, 1.0585
1.0420, 1.0552
Chemical composition
of welding wire (wt. % ) :
C
0,08
Si
0,90
Mn
1,50
P
<0,025
S
<0,025
Mechanical properties
of all weld metal:
Yield strength
Tensile strength
Elongation
Impact energy
ReL / Rp 0.2:
Rm:
A5:
KV :
> 420
500 - 640
>20
>47
MPa(N/mm )
2
MPa(N/mm )
%
J ( -50C)
0,6 ;
1,6 ;
0,8 ;
2,0 ;
0,9 ;
2,5 ;
1,0 ; 1,2 ;
3,0 ; 4,0
1,6
( mm )
( mm )
length: 1000 mm
Form of delivery:
Approvals:
TV, DB, CR, ABS, BV, GL, LR, DNV, S, ( for VAC 60)
TV , (for TIG VAC 60)
REF. W / CJ
Date: 2013-06-26
S4
Classification:
VAC 65
TIG VAC 65
d.o.o.
EN 440
EN1668
DIN 8559
W.Nr
ASME/AWS A - 5.18
EN ISO 636-A
EN ISO 636-B
EN ISO 14341-A*
EN ISO 14341-B*
G 46 4 C/M G4Si1
W 46 4 W4Si1
SG 3
W SG 3
1.5130
ER 70 S-6
W 46 4 W4Si1
W 55A 4 W6
G46 4M/C G4Si1
G 55A 4 M/C G6
Base materials:
Unalloyed steel
Fine-grained steel
Boiler and vessel
steel
Pipe steel
Shipbulding steel
Cast steel
SIST EN
S185 - E335+CR
S235N - S355N
P255NH - P355NH
P235GH, P265GH
P295GH, P355GH
P235G1TH - P355T2
L210 - L360GA
L240NB - L415NB
S235JRS2-S235J4S
S310G1S S355G2S
GE200 GE260
DIN
St 33 - St 60.2
St E 255 - St E 355
W St E 255 - W St E 355
H I, H II,
17Mn4, 19Mn5
St 35 - St 52.4
St E 210.7
StE290.7 StE415.7
GL-A, do GL-E
GL-A32 do GL-D36
GS-38 do GS-52
W.Nr.
1.0035, 1.0060
1.0461, 1.0545
1.0462, 1.0565
1.0345, 1.0425
1.0481, 1.0473
1.0308, 1.0581
1.0307, 1.0499
1.0484, 1.8972
1.0441, 1.0476
1.0513, 1.0585
1.0420, 1.0552
Chemical composition
of welding wire (wt. % ) :
C
0,08
Si
1,00
Mn
1,70
P
<0,025
S
<0,025
Mechanical properties
of all weld metal:
Yield strength
Tensile strength
Elongation
Impact energy
ReL / Rp 0.2:
Rm:
A5:
KV :
> 460
530 - 680
> 20
> 47
MPa(N/mm )
2
MPa(N/mm )
%
J ( -40C)
0,8;
1,6 ;
( mm )
( mm )
length: 1000 mm
Form of delivery:
Approvals:
REF. W / CJ
Date: 2013-06-26
S5
Classification:
EN 440
ASME/WS A5.28
EN ISO 14341-A*
EN ISO 14341-B*
G 50 4 C/M G 3Ni1
~ ER 80 S-Ni1
G 50 4M/C G3Ni1
G 57A 4 M/C GN2
VAC 60 Ni
d.o.o.
Base materials:
High-alloyed for
construction
Special alloyed, for
constructions
Construction steels for
law temperature
SIST EN
S380N - S500N
DIN
St E 380 do St E
500
P380
W St E 380 do W
St E 500
T St E 380 do T St
E 500
17Mn4, 19Mn5
(CORTEN,
Patinax)
W. Nr.
1.8900, 1.8907
Chemical composition
of welding wire (wt. % ) :
C
0,08
Si
0,80
Mn
1,50
Ni
1,10
P
<0,025
S
<0,025
Mechanical properties
of all weld metal:
Yield strength
Tensile strength
Elongation
Impact energy
ReL / Rp 0.2:
Rm:
A5:
KV :
> 490
560 - 720
> 18
> 47
MPa(N/mm )
2
MPa(N/mm )
%
J ( -40C)
Form of delivery:
REF. W / B
Date: 2013-06-26
S6
Classification:
EN 440
W. Nr
ASTM/AWS SFA 5.18
EN ISO 14341-A*
EN ISO 14341-B*
G 42 2 C/M G 3Si1+Ti
1.5125
ER 70 S-2
G 42 2 M/A/C G3Si1
G 49A 2 M/A/C G11
VAC 60 Ti
d.o.o.
Base materials:
Unalloyed steel
Fine-grained steel
Boiler and vessel
steel
Pipe steel
Shipbulding steel
Cast iron
SIST EN
S185 - E335
S235N - S355N
P255NH - P355NH
S420ML
P235GH, P265GH
P295GH, P355GH
P235G1TH - P355T2
L210 - L360GA
L240NB - L415NB
S235JRS2-S235J4S
S310G1S S355G2S
GE200 GE260
DIN
St 33 - St 60.2
St E 255 - St E 355
W St E 255 - W St E 355
TStE 420 TM
H I, H II,
17Mn4, 19Mn5
St 35 - St 52.4
St E 210.7
StE290.7 StE415.7
GL-A, do GL-E
GL-A32 do GL-D36
GS-38 do GS-52
W.Nr.
1.0035, 1.0060
1.0461, 1.0545
1.0462, 1.0565
1.8836
1.0345, 1.0425
1.0481, 1.0473
1.0308, 1.0581
1.0307, 1.0499
1.0484, 1.8972
1.0441, 1.0476
1.0513, 1.0585
1.0420, 1.0552
Chemical composition
of welding wire (wt. % ) :
C
0,06
Si
0,80
Mn
1,50
P
<0,020
S
<0,020
Ti
0,12
Mechanical properties
of weld metal (wt. % ) :
Yield strength
Tensile strength
Elongation
Impact energy
ReL / Rp 0.2:
> 440
> 510
> 20
> 47
Rm:
A5:
KV :
MPa(N/mm )
2
MPa(N/mm )
%
J ( -20C)
C1 (dick plates)
Ar + 5% CO2 + 5% O2 (recommended for galvanized plates)
0,6;
0,8;
0,9; 1,0 ;
1,14;
1,2;
1,6 ( mm )
Form of delivery:
Approvals:
TV, DB
REF. W / CJ
Date: 2013-06-26
S7
Classification:
EN 440
ASME/AWS A5.28
EN ISO 14341-A*
EN ISO 14341-B*
G 42 2 M/C G0
ER 80 S-G
G 42 2 M/C GO
G 49A 2 M/C GO
VAC 60 CuNi
d.o.o.
Base materials:
Special alloyed constructon
steel
SIST EN
S235J0W
S355J2W
S355K2G1W
S355J2WP
S355J2G1W
S235JRW
S355J2G1W
DIN
WT St 37
WT St 52-3
S355J2WP (CORTEN A)
WTSt355W2 (CORTEN B)
WTSt27-2(A cor37)
WTSt355W2 (A cor50)
W. Nr.
1.8958
1.8963
1.8966
1.8946
1.8963
1.8960
1.8963
Chemical composition
of welding wire (wt. % ) :
C
0,10
Si
0,90
Mn
1,50
Ni
0,50
Cu
0,50
P
<0,025
S
<0,025
Mechanical properties
of weld metal:
Yield strength
Tensile strength
Elongation
Impact energy
ReL / Rp 0.2:
Rm:
A5:
KV :
> 430
540 - 640
> 20
>47
MPa(N/mm )
2
MPa(N/mm )
%
J ( -20C)
0,8 ;
Form of delivery:
Approvals:
REF. Sl / CJ
1,0 ;
1,2 ;
1,6
( mm )
TV, DB
Date: 2013-06-26
S8
Classification:
EN 12 534
ASME/AWS SFA 5.28
EN ISO 16834-A
EN ISO 16834-B
Mn3Ni1Mo
ER 80 S-Ni1
G 55 2A Mn3Ni1Mo
G 62A 2 N2M2T
MIG 65
d.o.o.
Base materials:
SIST EN
Unalloyed steel
DIN
S275-S355
Shipbuilding steel
Pipe steel
Fine-grained steel
Microalloyed construction
steel
A-E,
AH32 EH36
W.Nr.
~1.0411-~1.0476
1.0513 1.0589
L 490GA, L360GA
P275T1
P355N
P355NL1-P460NL1
ST44.0
StE 355
TStE 355 TStE 460
1.0483 1.0499
1.0256
1.0562
1.0566 1.8915
S460N S500N
S460NL S500NL
1.8901-1.8907
1.8903 S500NL
Chemical composition
of welding wire (wt. % ) :
C
0,08
Si
0,70
Mn
1,20
Ni
1,10
Mo
0,30
Mechanical properties
of weld metal (wt. % ) :
Yield strength
Tensile strength
Elongation
Impact energy
ReL / Rp 0.2:
Rm:
A5:
KV :
> 540
> 630
> 18
100
MPa(N/mm )
2
MPa(N/mm )
%
J ( -20C)
0,8 ;
Form of delivery:
REF. W / CJ
1,0 ;
1,2 ;
Date: 2013-06-26
1,6
( mm )
S9
Classification:
EN 12534
ASME/AWS SFA 5.28
EN ISO 16834-A
EN ISO 16834-B
Mn3Ni1CrMo
ER 100 S-1
G 69 4M Mn3Ni1CrMo
G 69A 4M N3M2
MIG 75
d.o.o.
Base materials:
Special alloyed steel
for construction
Pipe steel
SIST EN
S690Q,
DIN
StE 690 V, StE 690 TM
StE 420 - StE 500
EStE 420 - EStE 500
N-A-XTRA 70, BHV 70 V,
HY 100
X60, X65,
X70, X80
S550QL1
16NiCrMo12-6
L415NB, L450MB
L485MB
W.Nr.
1.8931,
1.8986,
1.6782
1.8972, 1.8975
1.8977
Chemical composition
of welding wire (wt. % ) :
C
0,08
Si
0,60
Mn
1,70
Cr
0,25
Ni
1,40
Mo
0,30
Mechanical properties
of all weld metal (wt. % ) :
Yield strength
Tensile strength
Elongation
Impact energy
ReL / Rp 0.2:
Rm:
A5:
KV :
> 690
770 - 940
> 17
> 47
MPa(N/mm )
2
MPa(N/mm )
%
J ( -40C)
0,8 ;
Form of delivery:
Approvals:
REF. W / CJ
1,0 ;
1,2 ;
1,6 ( mm )
Date: 2013-06-26
S 10
Classification:
EN 12 534
ASME/AWS SFA 5.28
EN ISO 16834-A
EN ISO 16834-B
89 6M GMn4Ni2CrMo
ER 120 S-G
G89 6 M Mn4Ni2CrMo
G 83A 6 M N4M4T
MIG 90
d.o.o.
Base materials:
High-strength fine grained
steel
SIST EN
S890Q, XABO 890, MICRAL
890
W.Nr.
1.8940, 1.8925
1.8940
Chemical composition
of welding wire (wt. % ) :
C
0,10
Si
0,80
Mn
1,80
Cr
0,35
Ni
2,0
Mo
0,50
Mechanical properties
of all weld metal (wt. % ) :
Yield strength
Tensile strength
Elongation
Impact energy
RpeL / Rp 0.2:
Rm:
A5:
Av :
> 890
940-1180
> 15
> 47
MPa(N/mm )
2
MPa(N/mm )
%
J ( -60C)
1,0 ;
Form of delivery:
Approvals:
TV, GL
REF. W / CJ
1,2 ;
1,6 ( mm )
Date: 2012-03-07
S 11
Classification:
EN 12072
W. Nr:
ASME/AWS A 5.9
EN 10088-3 97
EN ISO 14343-A
EN ISO 14343-B
G17
1.4016
ER 430
X6 Cr17
G17
SS430
MIG 17
d.o.o.
Base materials:
Description:
Rust corrosion resistance steels with 13 - 18 % Cr.
Other stainless steels and casts
Chemical composition
of welding wire (wt. % ) :
C
< 0,07
Si
0,70
Mn
0,50
Cr
17,0
Mechanical properties
of all weld metal (wt. % ) :
Hardness HB
180 - 300
Ar + 1 3 % O2, Ar + 8 % CO2,
( M13, M20 according to EN ISO 14175)
Form of delivery:
REF. W / CJ
Date: 2013-06-26
S 12
Classification:
EN 12072
d.o.o.
MIG 19/9 Nb Si
TIG 19/9 Nb Si
DIN 8556
W. Nr.
ASME/AWS A 5.9
ISO
EN ISO 14343-A
EN ISO 14343-A
EN ISO 14343-B
G 19 9 Nb Si
W 19 9 Nb Si
SG X5CrNi Nb19 9
1.4551
ER 347 Si
19/9 Nb Si
G 19 9 NbSi
W 19 9 NbSi
SS 347 Si
Base materials:
SIST EN
X5CrNi 18 10
X2CrNi 19-11
GX5CrNi19-10
(LK 979)
X6CrNiTi 18-10
X6CrNiNb 18-10
GX5CrNiNb19-11
(PK 11 SPL)
DIN:
X5CrNi 18 10
X2CrNi 19 11
G-X6 CrNi 18 9
W.Nr.
1. 4301
1.4306
1.4308
X6CrNiTi 18 10
X6CrNiNb 18 10
G-X5CrNiNb 18 9
1.4541
1.4550
1.4552
Chemical composition
of welding wire (wt. % ) :
C
0,06
Si
0,80
Mn
2,0
Cr
19,0
Ni
9,0
Nb
0.70
Mechanical properties
of all weld metal (wt. % ) :
Yield strength
Tensile strength
Elongation
Impact energy
ReL / Rp 0.2:
Rm:
A5:
KV :
> 350
570 - 670
> 30
> 60
MPa(N/mm )
2
MPa(N/mm )
%
J (+ 20 C)
Suitable shielding gases: MIG-process Ar + 1 3 % O2, Ar + 2,5 % CO2 (M13, M12 acc. to EN ISO 14175 )
TIG-process Ar (I1) M13, M12 acc. to EN ISO 14175 )
0,8 ;
1,6 ;
Form of delivery:
REF. W / CJ
1,0;
2,0 ;
1,2;
2,4 ;
1,6
3,2
Date: 2013-06-26
( mm )
( mm )
length: 1000 mm
S 13
Classification:
EN 12072
d.o.o.
DIN 8556
W. Nr.
ASME/AWS A 5.9
ISO
EN ISO 14343-A
EN ISO 14343-A
EN ISO 14343-B
MIG 19/9 NC Si
TIG 19/9 NC Si
G 19 9 L Si
W 19 9 L Si
SG X2CrNi 19 9
1.4316
ER 308 L Si
19/9 L Si
G 19 9 LSi
W 19 9 LSi
SS 308 LSi
Base materials:
Description:
Alloyed corrosion resistant
DIN:
W.n.
X5CrNi 18 9
1. 4301
X2CrNi 18 9
1.4306
X10CrNiNb18 9 1.4550
Chemical composition
of welding wire (wt. % ) :
C
< 0,025
Si
0,80
Mn
2,0
Cr
19,0
Ni
9,0
Mechanical properties
of all weld metal (wt. % ) :
Yield strength
Tensile strength
Elongation
Impact energy
ReL / Rp 0.2:
Rm:
A5:
KV :
> 320
550 - 650
> 30
> 80
> 32
MPa(N/mm )
2
MPa(N/mm )
%
J (+ 20 C)
J ( -196 C)
Suitable shielding gases: MIG-process Ar + 1 3 % O2, Ar + 2,5 % CO2 (M13, M12 acc. to EN ISO 14175 )
TIG-process Ar (I1) M13, M12 acc. to EN ISO 14175 )
Approvals:
REF. W / CJ
0,8 ;
1,6 ;
1,0 ;
2,0 ;
1,2 ;
2,4 ;
1,6
3,2
( mm )
( mm )
length: 1000 mm
Date: 2013-06-27
S 14
Classification:
EN 12072
d.o.o.
DIN 8556
W. Nr.
AWS A5.9
ISO
EN ISO 14343-A
EN ISO 14343-A
EN ISO 14343-B
G 19 12 3 Nb Si
W 19 12 3 Nb Si
SG X5CNiMoNb 19 12
1.4576
ER 318 Si
19/12/3 Nb Si
G 19 12 3 NbSi
W 19 12 3 NbSi
S 318
Base materials:
W.Nr.
1.4401
1.4436
1.4571
1.4573
1.4580
1.4583
DIN:
X5 CrNiMo 17 12
X5 CrNiMo 17 13 3
X6 CrNiMoTi 17 12 2
X10 CrNiMoTi 18 12
X6 CrNiMoNb 17 12 2
X10 CrNiMoNb 18 12
EN:
X5 CrNiMo 17-12-2
X3 CrNiMo 17-13-3
X6 CrNiMoTi 17 12 2
(X10 CrNiMoTi 18 12)
X6 CrNiMoNb 17-12-2
(X10 CrNiMoNb 18 12)
Chemical composition
of welding wire (wt. % ) :
C
0,06
Si
0,80
Mn
1,40
Cr
19,0
Ni
12,0
Mo
2,60
Nb
0,7
Mechanical properties
of all weld metal (wt. % ) :
Yield strength
Tensile strength
Elongation
Impact energy
ReL / Rp 0.2:
Rm:
A5:
KV :
> 350
570 - 670
> 30
> 65
MPa(N/mm )
2
MPa(N/mm )
%
J ( +20 C)
Suitable shielding gases: MIG-process Ar + 1 3 % O2, Ar + 2,5 % CO2 (M13, M12 acc. to EN ISO 14175 )
TIG-process Ar (I1) M13, M12 acc. to EN ISO 14175 )
REF. W / CJ
0,8 ; 1,0;
1,6 ; 2,0 ;
1,2;
2,4;
1,6
3,2 ;
( mm )
( mm )
length: 1000 mm
Date: 2013-06-27
S 15
Classification:
EN 12072
d.o.o.
DIN 8556
W. Nr.
ASME/AWS A.5.9.
ISO
EN ISO 14343-A
EN ISO 14343-A
EN ISO 14343-B
G 19 12 3 L Si
W 19 12 3 L Si
SG X2CrNiMo19 12
1.4430
ER 316 L Si
19/12/3 L Si
G 19 12 3 LSi
W 19 12 3 LSi
SS 316 LSi
Base materials:
Description
Corrosion resistant steel
DIN:
X5CrNiMo 17 12 2
X5CrNiMo 17 13 3
X6 CrNiMoTi 17 12 2
W.Nr.
1.4401
1.4436
1.4571
Chemical composition
of welding wire (wt. % ) :
C
< 0,025
Si
0,80
Mn
1,75
Cr
19,0
Ni
11,5
Mo
2,75
Mechanical properties
of all weld metal (wt. % ) :
Yield strength
Tensile strength
Elongation
Impact energy
ReL / Rp 0.2:
Rm:
A5:
KV :
> 320
550 - 650
> 30
> 80
>32
MPa(N/mm )
2
MPa(N/mm )
%
J ( 20 C)
J ( -110 C)
Suitable shielding gases: MIG-process Ar + 1 3 % O2, Ar + 2,5 % CO2 (M13, M12 acc. to EN ISO 14175 )
TIG-process Ar (I1) M13, M12 acc. to EN ISO 14175 )
Form of delivery:
Approvals:
REF. W / CJ
( mm )
( mm )
Date: 2013-06-27
length: 1000 mm
S 16
Classification:
EN 12072
d.o.o.
MIG 25/14 NC Si
TIG 25/14 NC Si
DIN 8556
W. Nr.
ASME/AWS A 5.9
EN ISO 14343-A
EN ISO 14343-A
EN ISO 14343-B
G 23 12 L Si
W 23 12 LSi
SG X2CrNi 24 12
1.4332
ER 309 L Si
G 23 12 LSi
W 23 12 LSi
SS 309 LSi
Base materials:
Description:
High alloyed steel
Steels with high tensile straight
Austenitic manganese steels
Other difficult to weld steels
Chemical compositio
of welding wire (wt. % ) :
C
< 0,025
Si
0,80
Mn
1,60
Cr
23,5
Ni
13,5
Mechanical properties
of all weld metal (wt. % ) :
Yield strength
Tensile strength
Elongation
Impact energy
ReL / Rp 0.2:
Rm:
A5:
KV :
>380
550 - 700
>22
>40
MPa(N/mm )
2
MPa(N/mm )
%
J ( +20 C)
Suitable shielding gases: MIG-process Ar + 1 3 % O2, Ar + 2,5 % CO2 (M13, M12 acc. to EN ISO 14175 )
TIG-process Ar (I1) M13, M12 acc. to EN ISO 14175 )
0,8 ;
1,6 ;
Form of delivery:
REF. W / CJ
1,0;
2,0 ;
1,2;
2,4;
1,6
3,2
Date: 2013-06-27
( mm )
( mm )
length: 1000 mm
S 17
Classification:
EN 12072
MIG 18/8/6 Si
TIG 18/8/6 Si
d.o.o.
DIN 8556
W. Nr.
ASME/AWS A 5.9
ISO
EN ISO 14343-A
EN ISO 14343-A
EN ISO 14343-B
G 18 8 Mn
W 18 8 Mn
SG X15CrNiMn 18 8
1.4370
ER 307Si
18/8 Mn 6
G 18 8 Mn
W 18 8 Mn
SS 307
Base materials:
Description:
High alloyed steel
Steels with high tensile straight
Austenitic manganese steels
Other difficult to weld steels
Chemical composition
of welding wire (wt. % ) :
C
0,08
Si
0,80
Mn
7,0
Cr
18,5
Ni
9,0
Mechanical properties
of all weld metal (wt. % ) :
Yield strength
Tensile strength
Elongation
Impact energy
ReL / Rp 0.2:
Rm:
A5:
KV :
> 380
560 - 660
35
> 40
MPa(N/mm )
2
MPa(N/mm )
%
J ( +20 C)
Suitable shielding gases: MIG-process Ar + 1 3 % O2, Ar + 2,5 % CO2 (M13, M12 acc. to EN ISO 14175 )
TIG-process Ar (I1) M13, M12 acc. to EN ISO 14175 )
0,8 ; 1,0;
1,6 ; 2,0 ;
1,2 ; 1,6
2,4 ; 3,25
( mm )
( mm )
length: 1000 mm
Form of delivery:
Approvals:
REF. W / CJ
Date: 2013-06-27
S 18
Classification:
EN 12072
DIN 8556
W. Nr.
ASME/AWS A 5.9
EN ISO 14343-A
EN ISO 14343-A
EN ISO 14343-B
MIG 25/20
TIG 25/20
d.o.o.
G 25 20
W 25 20
SG X12CrNi 25 20
1.4842
ER 310
G 25 20
W 25 20
SS 310
Base materials:
Special alloyed- fire
resistent
SIST EN
X15CrNiSi20-12
X15CrNiSi25-21
X8CrNi25-21
GX40CrNiSi25-20
X10CrAlSi25
GX25CrNiSi18-9
GX40CrNiSi22-10
DIN
X15 CrNi Si 20 12
X15 CrNi Si 25 20
X12 CrNi 25 21
GX40CrNiSi25-20
X10 CrAl 24
GX25CrNiSi18-9
GX40CrNiSi22-9
W.Nr.
1.4828
1.4841
1.4845
1.4848
1.4762
1.4825
1.4826
Chemical composition
welding wire (wt. % ) :
C
0,12
Si
0,50
Mn
1,75
Cr
25,0
Ni
20,0
Mechanical properties
of all weld metal (wt. % ) :
Yield strength
Tensile strength
Elongation
Impact energy
ReL / Rp 0.2:
Rm:
A5:
KV :
> 300
540 - 640
>30
>70
MPa(N/mm )
2
MPa(N/mm )
%
J ( +20 C)
Suitable shielding gases: MIG-process Ar + 1 3 % O2, Ar + 2,5 % CO2 (M13, M12 acc. to EN ISO 14175 )
TIG-process Ar (I1) M13, M12 acc. to EN ISO 14175 )
REF. W / CJ
0,8 ;
1,6 ;
1,0;
2,0 ;
1,2;
2,4 ;
1,6
3,2
( mm )
( mm )
length: 1000 mm
Date: 2013-06-27
S 19
Classification:
EN 12072
DIN 8556
W. Nr.
ASME/AWS A 5.9
EN ISO 14343-A
EN ISO 14343-A
EN ISO 14343-B
MIG 29/9
TIG 29/9
d.o.o.
G 29 9
W 29 9
SG X10CrNi 30 9
1.4337
ER 312
G 29 9
W 29 9
SS 312
Base materials:
Description:
High alloyed steel
Steels with high tensile straight
Austenitic manganese steels
Other difficult to weld steels
Chemical composition
of welding wire (wt. % ) :
C
< 0,14
Si
0,40
Mn
1,75
Cr
30,5
Ni
9,0
Mechanical properties
of all weld metal (wt. % ) :
Yield strength
Tensile strength
Elongation
Impact energy
ReL / Rp 0.2:
Rm:
A5:
KV :
MPa(N/mm )
2
MPa(N/mm )
> 540
740 - 850
>18
>30
%
J (+ 20 C)
Suitable shielding gases: MIG-process Ar + 1 3 % O2, Ar + 2,5 % CO2 (M13, M12 acc. to EN ISO 14175 )
TIG-process Ar (I1) M13, M12 acc. to EN ISO 14175 )
REF. W / CJ
0,8 ;
1,6 ;
1,0;
2,0 ;
1,2;
2,4;
1,6
3,2
( mm )
( mm )
length: 1000 mm
Date: 2013-06-26
S 20
Classification:
EN ISO 18274
DIN 1736
W. Nr.
ASME/AWS A 5.14
MIG 70/15
TIG 70/15
d.o.o.
NiCr20
SG Ni Cr 20 Nb
2.4806
ER Ni Cr-3
Base materials:
High alloyed Cr- Cr-Ni steel
9%-Ni, 1,5-5% Ni steels and other Ni - alloys
Unalloyed steels with high alloyed Ni - steels
Difficult to weld steels
Copper and copper alloys with steels
Chemical composition
of welding rod (wt.%):
Ni
>67
Cr
20,0
Nb
2,5
Mn
3,0
Si
< 0,3
C
< 0,03
Mechanical properties
of all weld metal (wt.%):
Yield strength
Tensile strength
Elongarion
Impact energy
ReL / Rp 0.2:
Rm:
A5:
KV :
>360
600 750
>35
>100
MPa(N/mm )
2
MPa(N/mm )
%
J ( -196 C)
Suitable shielding gases: MIG-process Ar + 1 3 % O2, Ar + 2,5 % CO2 (M13, M12 acc. to EN ISO 14175 )
TIG-process Ar (I1) M13, M12 acc. to EN ISO 14175 )
Form of delivery:
1,0 ; 1,2;
2,0 ; 2,4 ; 3,2; 4,0
( mm )
( mm )
dolina: 1000 mm
REF. W / CJ
Datum: 2013-06-26
S 21
Classification:
EN 12072
W. Nr.
ASME/AWS A 5.9
EN ISO 14343-A
EN ISO 14343-B
W 22 9 3 LN
1.4462
ER 2209
W 22 9 3 NL
SS 2209
MIG 22/9/3 LN
TIG 22/9/3 LN
d.o.o.
Base materials:
Austenitic-feritic duplex steels:
Welding of different steels:
1.4462
1.4462 with 1.4583
1.4462 with HI/HII, StE255, 17Mn4, 15Mo3
Chemical composition
of welding rod (wt.%):
C
< 0,03
Si
0,60
Mn
1,70
Cr
22,5
Mo
3,0
Ni
9,0
N
0,13
Mechanical properties
of all weld metal (wt.%):
Yield strength
Tensile strength
Elongarion
Impact energy
ReL / Rp 0.2:
Rm:
A5:
KV :
>510
680 890
>20
>47
MPa(N/mm )
2
MPa(N/mm )
%
J ( +20C)
Suitable shielding gases: MIG-process Ar + 1 3 % O2, Ar + 2,5 % CO2 (M13, M12 acc. to EN ISO 14175 )
TIG-process Ar (I1) M13, M12 acc. to EN ISO 14175 )
0,8 ;
1,6 ;
Form of delivery:
REF. W / CJ
1,0;
2,0 ;
1,2;
2,4 ;
1,6
3,2
Date: 2013-06-26
( mm )
( mm )
length: 1000 mm
S 22
Classification:
EN ISO 18274
DIN 1736
W. Nr.
AWS A 5.14
MIG 625
TIG 625
d.o.o.
NiCr22Mo9Nb
SG NiCr21Mo9Nb
1.4831
ER NiCrMo-3
Base materials:
Special steels and Ni-alloys
High alloyed steels
Welding of general and special steels together
Difficult to weld steels
Chemical composition
of wire (wt.%):
C
< 0,025
Si
<0,50
Mn
<0,50
Cr
22,0
Ni
> 60
Mo
9,0
Nb
3,5
Mechanical properties
of all weld metal (wt.%):
Yield strength
Tensile strength
Elongarion
Impact energy
ReL / Rp 0.2:
Rm:
A5:
KV :
Form of delivery:
> 510
> 800
> 38
> 130
> 80
MPa (N/mm )
2
MPa (N/mm )
%
J ( 20 C)
J (-196 C)
( mm )
( mm )
dolina: 1000 mm
REF. W / CJ
Date: 2013-06-26
S 23
Classification:
ISO 24373
W. Nr.
ASME/AWS A 5.7
MIG Cu
TIG Cu
d.o.o.
Base materials:
Copper and copper alloys
Chemical composition
of welding wire (wt. % ) :
Cu
rest
Sn
0,8
Other
< 0,50
Mechanical properties
of all weld metal (wt. % ) :
Tensile strength
Hardness
Rm:
210 - 245
100
MPa(N/mm )
HB
0,8 ;
1,6 ;
Form of delivery:
REF. W / CJ
1,0;
2,0;
1,2 ; 1,6
2,4 ; 3,2
Date: 2012-03-10
( mm )
( mm )
length: 1000 mm
S 24
Classification:
MIG CuAl 8
TIG CuAl 8
d.o.o.
ISO 24373
W. Nr.
ASME/AWS A 5.7
Base materials:
Aluminium bronze: CuAl5, CuAl8
Cast steels
Nickel alloys
Brass, special brass (CuZn 20Al)
Chemical composition
of welding wire (wt. % ) :
Cu
rest
Al
8,0
Ni
< 0,80
Mn
1,0
Fe
< 0,5
Other
< 0,50
Mechanical properties
of all weld metal (wt. % ) :
Yield strength
ReL / Rp
Tensile strength Rm:
Elongation
A5:
Hardness
REF. W / CJ
0.2:
> 150
390 - 450
> 45
130
MPa(N/mm )
2
MPa(N/mm )
%
HB
0,8 ;
1,6 ;
1,0;
2,0;
1,2 ;
2,4 ;
3,2
( mm )
( mm )
length: 1000 mm
Date: 2013-06-26
S 25
Classification:
ISO 24373
W. Nr.
ASME/AWS A 5.7
MIG CuSn 6
TIG CuSn 6
d.o.o.
Base materials:
Copper and copper alloys (CuSn2, CuSn6, CuSn8, CuSn6Zn)
Grey cast iron
Tin bronze and combination with other bronzes
Chemical composition
of welding wire (wt. % ) :
Cu
rest
Sn
6,0
P
< 0,35
Fe
< 0,10
Other
< 0,50
Mechanical properties
of all weld metal (wt. % ) :
Yield strength
Tensile strength
Elongation
Hardness
ReL / Rp 0.2:
> 180
330 - 370
> 35
100
Rm:
A5:
MPa(N/mm )
2
MPa(N/mm )
%
HB
0,8 ;
1,6 ;
Form of delivery:
REF. W / CJ
1,0;
2,0;
1,2 ; 1,6
2,4 ; 3,2
Date: 2013-06-27
( mm )
( mm )
length: 1000 mm
S 26
Classification:
ISO 24373
W. Nr.
ASME/AWS A 5.7
MIG CuAg
TIG CuAg
d.o.o.
Base materials:
Copper alloys according to DIN 1787 and DIN 17 666
Chemical composition
of welding wire (wt. % ) :
Cu
rest
Ag
1,0
P
< 0,04
Mn
<0,1
Fe
< ,03
Other
< 0,50
Mechanical properties
of all weld metal (wt. % ) :
Yield strength
Tensile strength
Elongation
Hardness
ReL / Rp 0.2:
> 80
> 200
> 20
200
Rm:
A5:
MPa(N/mm )
2
MPa(N/mm )
%
HB
0,8 ;
1,6 ;
Form of delivery:
REF. W / CJ
1,0;
2,0;
1,2 ; 1,6
2,4 ; 3,2
Date: 2013-06-27
( mm )
( mm )
length: 1000 mm
S 27
Classification:
ISO 24373
MIG CuMn
TIG CuMn
d.o.o.
W. Nr.
ASME/AWS A 5.7
S-Cu 6338
(CuMn13Al8Fe3Ni2)
2.1367
ER CuMnNiAl
Base materials:
Aluminium bronzes with high Mn-content
Manganese-steel casting
Cast iron
Chemical composition
of welding wire (wt. % ) :
Cu
rest
Al
8,0
Ni
< 3,0
Mn
13,0
Fe
< 4,0
Other
< 0,50
Mechanical properties
of all weld metal (wt. % ) :
Yield strength
Tensile strength
Elongation
Hardness
ReL / Rp 0.2:
Rm:
A5:
> 400
800 - 900
> 10
200
MPa(N/mm )
2
MPa(N/mm )
%
HB
0,8 ;
1,6 ;
Form of delivery:
REF. W / CJ
1,0;
2,0;
1,2 ; 1,6
2,4 ; 3,2
( mm )
( mm )
Date: 2013-06-27
length: 1000 mm
S 28
Classification:
MIG CuSi 3
TIG CuSi 3
d.o.o.
ISO 24373
W. Nr.
ASME/AWS A 5.7
Base materials:
Brass
Materials acc. to DIN 17 666: CuSi2Mn, CuSi3Mn, CuMn2, CuMn5
Hot-dip galvanized steels
Chemical composition
of welding wire (wt. % ) :
Cu
rest
Si
3,0
Sn
< 1,5
Mn
0,5
Fe
< 0,5
Other
< 0,50
Mechanical properties
of all weld metal (wt. % ) :
Yield strength
Tensile strength
Elongation
Hardness
ReL / Rp 0.2:
Rm:
A5:
> 120
330 - 370
> 40
90
MPa(N/mm )
2
MPa(N/mm )
%
HB
0,8 ;
1,6 ;
Form of delivery:
REF. W / CJ
1,0;
2,0;
1,2 ;
2,4 ;
1,6
3,2
( mm )
( mm )
Date: 2013-06-27
length: 1000 mm
S 29
Notes:
OXYACETILENE - WELDING
VP 37 . T1
VP 40 . T2
VP 42 . T3
VP Mo T4
VP CrMo T5
Classification:
EN 12536
DIN 8554
ASME/AWS A5.2
W.Nr.
OI
GI
R 45
1.1116
VP 37
d.o.o.
Base materials
General structural steels
Pipe steels
SIST EN
DIN
S 185 S355GT
E 235 P235G1TH
St33 St52
St35 - St35.8
W.Nr.
1.0035 - 1.0580
1.0308 -1.0305
Si
< 0,20
Mn
0,50
Mechanical properties
Hardness-HB
100 - 200
ReL / Rp 0.2
2
MPa(N/mm )
>260
Rm MPa(N/mm )
A5 (%)
360 - 450
> 20
KV +20C(J)
> 35
after normalizing > 65
1,6;
Packing:
Approvals:
TV
REF. A / CJ
Date: 2012-01-03
length: 1000 mm
T1
Classification:
EN 12536
DIN 8554
ASME/AWS A5.2
W.Nr.
O II
G II
R 45
1.0495
VP 40
d.o.o.
Base materials
SIST EN
DIN
W.Nr.
1.0037 - 1.0144
1.0038 1.0257
Si
< 0,20
Mn
1,0
Mechanical properties
Hardness-HB
110 - 130
ReL / Rp 0.2
2
MPa(N/mm )
>300
Rm MPa(N/mm )
A5 (%)
390 - 440
> 20
Packing:
REF. A / CJ
Date: 2012-01-03
KV
+20C(J)
> 50
length: 1000 mm
T2
Classification:
EN 12536
DIN 8554
ASME/AWS A5.2
W.Nr.
O III
G III
R 60
1.6215
VP 42
d.o.o.
Base materials
SIST EN
DIN
W.Nr.
S185 S355J0
St33 St52-3
1.0035 - 1.0553
Pipe steels
Boiler plates
P235G1TH P355G1TH
P235GH, P236GH,
P285NH, P295GH
St35.8, St45.8
HII, HII,
HIII, 17Mn4
1.0305 1.0405
1.0345, 1.0425,
1.0435, 1.0481
Si
< 0,25
Mn
1,10
Ni
0,70
ReL / Rp 0.2
2
MPa(N/mm )
>310
Rm MPa(N/mm )
A5 (%)
410 - 560
> 22
Mechanical properties
Hardness-HB
110 - 130
Av +20C(J)
>47
after normalizing > 80
Packing:
Approvals:
CR, GL, S, TV
REF. A / CJ
Date: 2012-01-03
length: 1000 mm
T3
Classification:
EN 12536
DIN 8554
ASME/AWS A5.2
W.Nr.
O IV
G IV
R 65
1.5425
VP Mo
d.o.o.
Base materials
General structural steels
Pipe steels
Boiler steels
SIST EN
S235JRG2 S355J2G3
DIN
St37 St52
W.Nr.
1.0038 - 1.0570
P235G1TH, P255G1TH
16Mo3
P235GH P236GH
P295GH
St35.8, St45.8
15Mo3
HI - HIII,
17Mn4
1.0305, 1.0405,
1.5415
1.0345 - 1.0477,
1.0481
Si
<0,25
Mn
1,0
Mo
0,5
Mechanical properties
Hardness-HB
160 - 200
ReL / Rp 0.2
2
MPa(N/mm )
>295
Rm MPa(N/mm )
A5 (%)
440 - 540
> 18
KV +20C(J)
Packing:
REF. A / CJ
Date: 2012-01-03
>47
length: 1000 mm
T4
Classification:
EN 12536
DIN 8554
ASME/AWS A5.2
W.Nr.
OV
GV
R 65
1.7346
VP CrMo
d.o.o.
Base materials
SIST EN
13CrMo4-5
Boiler steels
DIN
HIV, 13 CrMo44
1.7335
W.Nr.
Si
< 0,25
Mn
1,0
Mo
0,5
Cr
1,0
Mechanical properties
Hardness-HB
160 - 200
ReL / Rp 0.2
2
MPa(N/mm )
>295
REF. A / CJ
Rm MPa(N/mm )
A5 (%)
490 - 590
> 18
KV +20C(J)
>47
length: 1000 mm
Date: 2012-01-03
T5
EPP 2
EPP 2 Mo
EPP 2 Ni
EPP 3
EPP 17 Cr
EPP 19/9 NC
U1
EPP 19/12/3 NC
EPP 18/8/6
INOX TR Cr 17
INOX TR 19/9
WIRES / STRIPS
d.o.o.
Classification:
Low alloyed welding wires:
Wire:
EPP 2
EPP 2 Mo
EPP 3
DIN 8557
S2
S 2 Mo
S3
ASME/AWS:
A 5. 17 EM 12 K
A 5. 23 EA 2
A 5. 17 EM 13 K
ISO 14171-A
S2
S2 Mo
S3
ASME/AWS A5.9
ER 430
ER 308 L
ER 316 L
ER 307
DIN: 8556
UP - X2 CrNi 19.9
UP - X2 CrNiMo 19.12
UP - X15 CrNiMn 18.8
Chemical composition
of welding wires/strips (wt. % ) :
Wire/strip:
EPP 2
EPP 2 Mo
EPP 3
EPP17 Cr / INOX TR 17Cr
EPP 19/9 NC
INOX TR 19/9
EPP 19/12/3 NC
EPP 18/8/6
C
0,10
0,10
0,11
0,07
0,025
0.05
< 0,025
0,12
EPP
INOX TR
Form of delivery:
Si
0,15
0,15
0,2
0,7
0,40
0.40
0,40
0,60
1,6 ;
2,0 ;
2,5 ; 3,0 ;
30 x 0.5, 60 x 0.5 (mm)
REF. W / CJ
Mn
1,00
1,00
1,5
0,5
1,60
1.80
1,60
7,00
Date: 2012-03-10
K435
D 760
Cr
Ni
Mo
0,50
17
19,0
20.0
19,0
18,0
4,0 ;
9,0
9.5
12,0
8,0
2,8
5,0 ( mm )
25 kg
cca 300 kg
cca 300 kg
U1
d.o.o.
d.o.o.
V45
V46
V47
V48
V49
V50
V51
d.o.o.
FILTUB 12 M
Classification:
AWS A-5.18
: E 70 C 6MH4
AWS A-5.20
: E 71 T 1MH4
: T 46 4 MM 1
EN 758
EN ISO 17632-A : T 46 4 MM1 H5
EN ISO 17632-B : T554T151MA H5
FILTUB 12M is metal-cored wire recommended for welding similar types of steels, including fine-grained steels.
Because metal cored wires do not result in a slag covering the weld, they combine the benefits of the high deposition
rates found in flux cored wires and the high efficiency rates of solid wires. It is particularly suitable for robot and
automatic welding. Features of this wire include good bead appearance with small spatter, no slag and therefore
without cleaning between runs, good restricting characteristics and high mechanical properties at low temperatures.
Base materials:
Art of steel
Non-alloyed steels :
Boiler plates :
Pipe steels :
Steels to API-Norm :
Shipbuilding steels :
Finegrained steels :
Steel castings :
DIN :
St 33 , St 37-2 , St 44-2 , St 52-3
H I , H II , 17Mn4
St 37-0 to St 52-0 , St 37-4 to St 52-4
St 210.7 to St 415.7
StE 290.7 TM to StE 480.7 TM
X 42 to X 70
A,B,D,E
AH 32 to EH 36
StE 255 to StE 460
WStE 255 to WStE 460
GS-38 , GS-45 , GS-52
W.Nr. :
1.0033 , 1.0037 , 1.0044 , 1.0553
1.0345 , 1.0425 , 1.0481
1.0254 to 1.0421 , 1.0255 to 1.0581
1.0307 to 1.8972
1.429 to 1.8977
1.0440 , 1.0472 , 1.0475 , 1.0476
1.0513 to 1.0589
1.0461 to 1.0562
1.0462 to 1.8937
1.0420 , 1.0443 , 1.0552
Heat treatment:
Type of wire :
metal cored
Welding current:
DC + / ( -)
Welding positions:
Si
Mn
0,05
0,55
1,40
Shielding gas :
( EN 14175 )
M 21
consumption : 12 - 18 l / min
< 3 ml
ReL / Rp 0.2:
> 460
MPa(N/mm )
2
Rm:
540 - 640
MPa(N/mm )
Elongation
A5:
> 24
Impact energy
KV :
KV :
KV :
> 120
> 80
> 47
J ( + 20C )
J ( - 20C )
J ( - 40 C)
Tensile strength
mm
1,2
1,4
1,6
Welding parameters
Current
Arc voltage Wire feed rate
A
V
m / min
120 - 300
22 - 30
4,5 - 14,0
140 - 340
23 - 33
3,5 - 13,0
180 - 400
23 - 35
4,0 - 12,0
Date:2013-06-12
Packing
K 300 , D 300
lay to lay weight :
approx. 15 kg
V1
Classification:
EN ISO 18276-A T 55 6 1NiMoMM1H5
EN ISO 18276-B T 62 6 T151MN2M2 H5
AWS ASME 5.28 E90 C-K3M H4
d.o.o.
FILTUB 28M
FILTUB 28M is medium alloy metal cored flux cored wire recommended for welding fine-grain structural steels
2
and creep resistant fine-grain structural steels up to yield strength of 600 N / mm . Features of this wire include
excellent mechanical properties at low temperatures, stable arc with low spatter, regular bead appearance and
very low slag.
Base materials:
Art of steel
Finegrained steels :
Creep resistant
finegrained steels :
Heat-treated
finegrained steels :
DIN :
StE 460 , StE 500
WStE 500 , TStE 460
TStE 500
NAXTRA 56 , NAXTRA 63
HY 80
WB 35 , WB 36
BHW 35 , BHW 38
W.Nr. :
1.8905 , 1.8907
1.8937 , 1.8915
1.8917
1.8944 , 1.8954
1.6780
1.8817 , 1.6368
1.8807
Heat treatment:
Type of wire :
metal cored
Welding current:
DC + / ( -)
Welding positions:
Shielding gas :
( EN 439 )
Si
Mn
Ni
Mo
0,05
0,35
1,40
1,0
0,40
< 5 ml
Mechanical properties:
Yield strength
N/mm2
Tensile strength
Rm:
N/mm2
650 - 750
Elongation
A5:
> 18
Impact energy
Av :
Av :
Av :
Av :
Av :
> 120
> 110
> 80
> 60
> 47
CO2 , M 21
consumption : 12 - 18 l/min
%
J ( + 20C )
J ( 0C )
J ( - 20C )
J ( - 40C )
J ( - 60 C)
mm
1,2
1,4
1,6
Welding parameters
Current
Arc voltage Wire feed rate
A
V
m / min
120 - 300
140 - 340
180 - 400
22 - 30
23 - 33
23 - 35
Datum :2013-06-12
4,5 - 14,0
3,5 - 13,0
4,0 - 12,0
Packing
K 300 , D 300
lay to lay
weight :
approx. 15 kg
V2
Classification:
AWS-SFA-5.29 : E 111 T1-K 4H4
AWS-SFA-5.28 : E 111 C-K 4H4
EN 12535 : T 69 4 Mn 2Ni Cr Mo M M 1 H5
EN ISO 18762-A: T 69 4 Mn2NiCrMoMM1 H5
EN ISO 18762-B: T 76 4 T5-1MA-N4C1M2 H5
d.o.o.
FILTUB 32M
FILTUB 32M is metal-cored medium alloy flux-cored wire recommended for welding high-strength fine-grain structural steels and creep resistant fine-grain structural steels . Optimal results are obtained at a heat input of
E 18 kJ / cm and at an interpass temperature of 100 - 150 C . Features of this wire included stable arc
with no spatter , regular bead appearance and no slag .Especially is suitable for automated and robotized applications.
Base materials:
Art of steel
Creep resistant
finegrained steels :
DIN :
NAXTRA 63 , NAXTRA 70
T 1 , T 1A , T 1B
( TStE 690 )
W.Nr. :
1.8954 , 1.8964
1.8920 , 1.8921 , 1.8922
Heat treatment:
Type of wire :
metal-cored
Welding current:
DC + / ( -)
Welding positions:
Shielding gas :
( EN 14175 )
Si
Mn
Cr
Ni
Mo
0,05
0,40
1,50
0,50
2,20
0,50
< 5 ml
Mechanical properties:
Yield strength
N/mm2
Tensile strength
Rm:
760 - 900
N/mm2
Elongation
A5:
> 16
Impact energy
Av :
Av :
Av :
Av :
Av :
> 80
> 70
> 60
> 55
> 47
CO2 , M 21
consumption : 12 - 18 l / min
%
J ( +20C )
J ( 0C )
J ( - 20C )
J ( - 40C )
J ( - 60C )
mm
1,2
1,4
1,6
Welding parameters
Current
Arc voltage Wire feed rate
A
V
m / min
1,2
1,4
1,6
120 - 300
140 - 340
180 - 400
Date:2013-068-10
22 - 30
23 - 33
23 - 35
Packing
K 300 , D 300
lay to lay
weight :
approx. 15 kg
V3
Classification:
AWS-SFA-5.28 : E 120 C-K4 H4
EN ISO 18276-A:T 89 4 Mn2NiCrMoMM 1 H5
EN ISO 18276-B:T 83 4 T151MN4C1M5 H5
FILTUB 38M
d.o.o.
FILTUB 38M is medium alloy metal cored flux cored wire recommended for welding high-strength fine-grained
2
structural steels with yield strength up to 880 N / mm . Optimal results are obtained with heat input of E 15 kJ / cm
and interpass temperatures not exceed 150C. Features of this wire include stable arc, no spatter or slag, excellent
bead appearance and good mechanical properties at low temperatures.
Base materials:
Art of steel
Finegrained steels :
Creep resistant
finegrained steels :
Heat-treated
finegrained steels :
DIN
StE 460 , StE 500
WStE 500 , TStE 460
TStE 500
NAXTRA 56 , NAXTRA 63
HY 80
WB 35 , WB 36
BHW 35 , BHW 38
XABO 620 , XABO 890 , XABO 960
W.Nr. :
1.8905 , 1.8907
1.8937 , 1.8915
1.8917
1.8944 , 1.8954
1.6780
1.5403 , 1.6368
1.8807
1.8914 , 1.8925 , 1.8933
Heat treatment:
Type of wire :
metal-cored
Welding current:
DC + / ( -)
Welding positions:
Shielding gas :
( EN 439 )
Si
Mn
Cr
Ni
Mo
0,05
0,45
1,50
1.0
2,10
0,40
< 5 ml
Mechanical properties:
Yield strength
N/mm2
Tensile strength
Rm:
950 - 1050
N/mm2
Elongation
A5 :
> 14
Impact energy
Av :
Av :
Av :
> 60
> 55
> 47
J ( 0C )
J ( - 20C )
J ( - 40C )
M 21
consumption : 12 - 18 l / min
mm
1,2
1,4
1,6
Welding parameters
Current
Arc voltage Wire feed rate
A
V
m / min
120 - 300
140 - 340
180 - 400
Datum :2013-06-12
22 - 30
23 - 33
23 - 35
4,5 - 14,0
3,5 - 13,0
4,0 - 12,0
Packing
K 300 , D 300
lay to lay
weight :
approx. 15 kg
V4
d.o.o.
Classification:
AWS-SFA-5.20 : E 71 T - 1
: T 46 4 P M 1 /
EN 758
T 46 4 P C 1
EN ISO 17632-A : T464C/M1 H5
EN ISO 17632-B : T554T1-C/MA H5
FILTUB 4 R
FILTUB 4R is rutile flux-cored wire suitable for welding similar types of steels including fine-grain structural steels,
shipbuilding steels and pipe steels. It features good weldability in all positions, low spatter losses, excellent bead
appearance and good slag detachability. The welding with high current consequently is giving a high deposition rate.
Base materials:
Art of steel
Non-alloyed steels :
Boiler plates :
Pipe steels :
Shipbuilding steels :
Steels to API-Norm :
Finegrained steels :
DIN :
St 33 , St 37-2 , St 44-2 , St 52-3
H I , H II , 17Mn4
St 37-0 to St 52-0 , St 37-4 to St 52-4
St 210.7 to St 415.7
StE 290.7 TM to StE 480.7 TM
A,B,D,E
AH 32 to EH 36
X 42 to X 70
StE 255 to StE 460
W.Nr. :
1.0033 , 1.0037 , 1.0044 , 1.0553
1.0345 , 1.0425 , 1.0481
1.0254 to 1.0421 , 1.0255 to 1.0581
1.0307 to 1.8972
1.0429 to 1.8977
1.0440 , 1.0472 , 1.0475 , 1.0476
1.0513 to 1.0589
1.0461 to 1.0562
Heat treatment:
Type of wire :
rutile
Welding current:
Si
Mn
0,05
0,55
1,20
DC +
Welding positions:
Shielding gas :
( EN 14175 )
CO2 ; M 21
consumption 10 - 12 l / min
Mechanical properties:
2
Yield strength
ReL / Rp 0.2:
> 470
MPa(N/mm )
Tensile strength
Rm:
540 - 640
MPa(N/mm )
Elongation
A5:
> 23
Impact energy
KV :
KV :
KV :
> 110
> 70
> 55
J ( +20 C)
J ( -20 C)
J ( -40 C)
CR
:
ABS :
BV
:
GL
:
LR
DNV :
S/UIC
TV
3YS
3YSA
3A3YM
3YS
mm
1,2
1,4
1,6
Welding parameters
Current
Arc voltage Wire feed rate
A
V
m / min
130 - 280
140 - 320
170 - 380
IIIYMS
Date:2013-06-12
23 - 30
22 - 30
23 - 32
4,5 - 13,0
4,0 - 11,0
3,0 - 10,0
Packing
K 300 , D 300
lay to lay
weight :
approx. 15 kg
V5
Classification:
AWS A-5.29
:E 71 T1-G
EN 758
:T 46 A 1 NiCrCuP M 1
EN ISO 17632-A :T504 ZPC/M1H5
EN ISO 17632-B :T554T1-1C/MA-NCC1 H5
d.o.o.
FILTUB 5R
FILTUB 5R is rutile flux-cored wire suitable for welding steel resistant to atmosferic corrosion such as CORTEN,
Patinax, Acor, etc. Features of this wire includes good weldability in positions, good bead appearance and easy slag
removal .
Base materials:
Art of steel
Weather corrosion
resistant steels :
DIN :
WTSt 37-3 , WTSt 52-3
CORTEN A , B , C
Patinax 37
Acor 37 , Acor 50
SN 15217
W.Nr. :
1.8961 , 1.8963
1.8962 , 1.8963
1.8960
1.8960 , 1.8962
1.8963
Heat treatment:
Type of wire :
metal-cored
Welding current:
DC + / ( -)
Welding positions:
Si
Mn
Ni
Cr
Cu
0,07
0,50
0,90
0,60
0,50
0,40
Shielding gas :
( EN 14175 )
< 5 ml
MPa(N/mm )
2
530 - 680
MPa(N/mm )
Elongation
A5:
> 22
Impact energy
KV :
> 47
J ( - 40 C)
M 21
consumption : 12 - 18 l / min
Welding parameters
Current
Arc
A
voltage
V
1,2
1,2
120 - 300
1,4
1,4
140 - 340
1,6
1,6
180 - 400
mm
Date:2013-068-10
Packing
K 300 , D 300
lay to lay
weight :
approx. 15
kg
V6
d.o.o.
FILTUB 6 R
Classification:
AWS A-5.29
: E 70 T1-G
EN 758
:T 42 A 1 Ni P C 1 /
T 42 A 1 Ni P M 1
EN ISO 17632-A :T42A ZPC/M 1 H5
EN ISO 17632-B :T49Y T1-1C/MA-G H5
FILTUB 6R is rutile flux-cored wire suitable for welding weatherproof steels. For welding thick work pieces
and for use under high resistant conditions is better suited FILTUB 40B. Features of this wire include good
weldability in positions, good bead appearance and easy slag removal.
Base materials:
Art of steel
Weather corrosion
resistant steels :
DIN
WTSt 37-3 , WTSt 52-3
CORTEN A , B , C
Patinax 37
Acor 37 , Acor 50
RBH 35
W.Nr. :
1.8961 , 1.8963
1.8962 , 1.8963
1.8960
1.8960 , 1.8962
Heat treatment:
Type of wire :
rutile
Welding current:
DC +
Welding positions:
Si
Mn
Ni
Cu
0,05
0,40
1,10
1,20
0,50
Mechanical properties:
2
Yield strength
ReL / Rp 0.2:
> 430
MPa(N/mm )
Tensile strength
Rm:
520 - 620
MPa(N/mm )
Shielding gas :
( EN 14175 )
Elongation
A5:
> 22
Impact energy
KV :
> 80
J ( +20 C)
CO2 , M 21
consumption : 12 - 18 l / min
Hardness:
mm
1,2
1,4
1,6
Welding parameters
Current
Arc voltage Wire feed rate
A
V
m / min
130 - 280
140 - 320
170 - 380
Date:2013-06-12
23 - 30
22 - 30
23 - 32
4,5 - 13,0
4,0 - 11,0
3,0 - 10,0
Packing
K 300 , D 300
lay to lay
weight :
approx. 15 kg
V7
d.o.o.
Classification:
AWS-SFA-5.29 :E 81 T1 - Ni1
EN 758
:T 46 4 1Ni P M1
: T561 GPH
BS 7084-89
EN ISO 17632-A :T46 6 1NiPM1 H5
EN ISO 17632-B :T556T1-1MA-N1 H5
FILTUB 7 R
FILTUB 7R is rutile nickel alloy tubular flux-cored wire suitable for welding fne-grain structural steels and high strength
steels up to tensile strength 580 MPa and good notch toughness up to - 40C. Its features include good weldability in all
positions for diameters 1,2 and 1,4 mm, good slag detachability, fine bead appearance and low spatter losses. It is
particularly suitable for mechanised circumferential pipe welding.
Base materials:
Art of steel
Constructional steels and
boiler plates :
Pipe steels :
Steels to API-Norm :
Shipbuildung steels :
Fine-grain structural steels
DIN
St 37.2 , St 44.2 , St 52.3
H I , H II , 17Mn4
St 37-0 to St 52-0
St 37-4 to St 52-4
StE 210.7 to StE 415.7
StE 290.7 to StE 480.7
X 42 to X 80
AH 32 to AH 36
StE 255 to STE 460
EStE 255 to EStE 460
W.Nr. :
1.0037 , 1.0044 , 1.0570
1.0345 , 1.0425 , 1.0481
1.0254 to 1.0481
1.0255 to 1.0581
1.0319 to 1.8972
1.484 to 1.8977
1.0513 to 1.0583
1.0461 to 1.8905
1.1103 to 1.8918
Heat treatment:
Type of wire :
rutile
Welding current:
DC +
Welding positions:
Shielding gas :
( EN 14175 )
M 21
consumption : 10 - 18 l / min
Si
Mn
Ni
0,05
0,40
1,30
0,90
Mechanical properties:
2
Yield strength
ReL / Rp 0.2:
> 500
MPa(N/mm )
Tensile strength
Rm:
560 - 700
MPa(N/mm )
Elongation
A5:
> 22
Impact energy
KV :
KV :
KV :
KV :
> 110
> 80
> 60
> 47
J
J
J
J
( + 20C )
( - 20C )
( - 40C )
( - 60C )
mm
1,2
1,4
1,6
Welding parameters
Current
Arc voltage Wire feed rate
A
V
m / min
130 - 280
140 - 320
170 - 380
Date: 2013-06-12
23 - 30
22 - 30
23 - 32
4,5 - 13,0
4,0 - 11,0
3,0 - 10,0
Packing
K 300 , D 300
lay to lay
weight :
approx. 15 kg
V8
d.o.o.
FILTUB 8 R
Classification:
AWS-SFA-5.29 : E 81 T1-A1
EN 758
: T 46 A Mo P M 2
EN ISO 17634-A : TMoPC/M1 H5
EN ISO 17634-B : T49T1-1C/M-2M3 H5
EN ISO 17632-A : T46 AMoPM1 H5
EN ISO 17632-B : T55YT1-1MA-2M3 H5
FILTUB 8R is rutile Mo alloy tubular flux-cored wire recommended for welding creep resistant boiler plates, pressure
pipe steels and fine-grain structural steels resistant to creep up to 520C. Rutile all-positional flux-cored wire with high
deposition rate by welding with high currents. Features of this wire included stabile arc with minimal spatter, good slag
detachability and fine bead appearance.
Base materials:
Art of steel
Boiler plates :
Pipe steels :
Steels to API-Norm :
Finegrained steels
DIN :
H I , H II , H III
17Mn4 , 19Mn5
St 35.8 , St 45.8
15Mo3
X 42 to X 80
StE 255 to StE 460
W.Nr. :
1.0345 , 1.0425 , 1.0435
1.0481 , 1.0482
1.0305 , 1.0405
1.5415
1.0461 to 1.8905
Heat treatment:
Type of wire :
rutile
Welding current:
DC +
Welding positions:
Si
Mn
Mo
0,05
0,35
1,20
0,60
Mechanical properties:
Yield strength
Shielding gas :
( EN 14175 )
M 21
consumption : 12 - 18 l / min
ReL / Rp 0.2:
MPa(N/mm )
> 490
Tensile strength
Rm:
550 - 650
MPa(N/mm )
Elongation
A5:
> 20
Impact energy
KV :
> 75
J ( +20 C)
Hardness:
mm
1,2
1,4
1,6
Welding parameters
Current
Arc voltage Wire feed rate
A
V
m / min
130 - 280
140 - 320
170 - 380
Date: 2013-06-12
23 - 30
22 - 30
23 - 32
4,5 - 13,0
4,0 - 11,0
3,0 - 10,0
Packing
K 300 , D 300
lay to lay
weight :
approx. 15 kg
V9
Classification:
AWS-SFA-5.29 : E 111 T1-K4 MJ H8
EN ISO 18276-A T 69 6 ZPM1 H5
EN ISO 18276-B T 76 6 T1 1MN4M1H5
d.o.o.
FILTUB 32R
FILTUB 32R is rutile flux-cored wire suitable for welding high-strength fine-grain structural steels and creep
resistant fine grain structural steel . All position flux cored wire with excellent mechanical properties. Features of this
wire include good weldability in positions, good bead appearance and easy slag removal.
Base materials:
Art of steel
Creep resistant
finegrained steels :
Heat treatment:
Type of wire :
rutill cored
Welding current:
DC + / ( -)
Welding positions:
Shielding gas :
( EN 439 )
DIN :
NAXTRA 63 , NAXTRA 70
T 1 , T 1A , T 1B
( TStE 690 )
W.Nr. :
1.8954 , 1.8964
1.8920 , 1.8921 , 1.8922
Si
Mn
Ni
Mo
0,06
0,40
1,60
2,0
0,40
< 5 ml
Mechanical properties:
Yield strength
N/mm2
Tensile strength
Rm:
770 - 950
N/mm2
Elongation
A5:
> 17
Av :
Av :
> 70
> 47
Impact energy
CO2 , M 21
consumption : 12 - 18 l/min
J ( - 40C )
J ( - 60 C)
mm
1,2
1,4
1,6
Welding parameters
Current
Arc voltage Wire feed rate
A
V
m / min
130 - 280
140 - 320
170 - 380
Date:2013-06-12
23 - 30
22 - 30
23 - 32
4,5 - 13,0
4,0 - 11,0
3,0 - 10,0
Packing
K 300 , D 300
lay to lay
weight :
approx. 15 kg
V10
d.o.o.
FILTUB 12 B
Classification:
AWS-SFA-5.20 : E 70 T 5 H5
EN 758
: T 42 4 B C 3 /
T 42 4 B M 3
BS 7084-89
: T 540 GBH
EN ISO 17632-A : T424BM/C3 H5
EN ISO 17632-B : T494T5.3M/CA H5
FILTUB 12B is basic flux-cored wire suitable for welding non-alloyed structural steels, boiler plates, pipe steels ageresistant steels, shipbuilding steels and fine-grain structural steels. Also is suitable for welding steels with high C content.
Its features include high grade mechanical properties at low temperatures, low hydrogen quality weld metal with a high
resistance to cracking in joints under restraint, good weldability, low spatter and easy slag removal.
Base materials:
Art of steel
Non-alloyed steels :
Boiler plates :
Pipe steels :
Steels to API-Norm :
Age-resistant steels :
Shipbuildung steels :
Steel castings :
Finegrained steels :
DIN :
St 33 to St 70
H I , H II , 17Mn4 , 19Mn5
St 37-0 to St 52-0 , St-37-4 to St-52-4
StE 210.7 to StE 360.7
X 42 to X 80
Ast 35 to Ast 45
A,B,D,E
GS-38 to GS-60
StE 255 to StE 355
WStE 255 to WStE 355
TStE 255 to TStE 355
W.Nr. :
1.0033 to 1.0070
1.0345 , 1.0425 , 1.0481 , 1.0482
1.0254 to 1.0421 , 1.0255 to 1.0581
1.307 to 1.0582
1.0346 to 1.0436
1.0440 , 1.0472 , 1.0475 , 1.0476
1.0420 to 1.0558
1.0461 to 1.0562
1.0462 to 1.0565
1.0463 to 1.0566
Heat treatment:
Type of wire :
basic
Welding current:
DC + / ( -)
Welding positions:
Shielding gas :
( EN 14175 )
CO2 , M 21
consumption : 12 - 18 l / min
Si
Mn
0,05
0,35
1,40
< 5 ml
Mechanical properties:
2
Yield strength
ReL / Rp 0.2:
> 420
MPa(N/mm )
Tensile strength
Rm:
510 - 610
MPa(N/mm )
Elongation
A5 :
> 26
Impact energy
KV :
KV :
KV :
> 160
> 100
> 60
J ( + 20 C )
J ( - 20 C )
J ( - 40 C )
mm
1,2
1,4
1,6
Welding parameters
Current
Arc voltage Wire feed rate
A
V
m / min
120 - 280
140 - 320
160 - 380
Date: 2013-06-12
23 - 30
22 - 30
23 - 32
4,5 - 13,0
4,0 - 11,0
3,0 - 10,0
Packing
K 300 , D 300
lay to lay
weight :
approx. 15 kg
V11
d.o.o.
FILTUB 14 B
Classification:
AWS A-5.29
: E 80 T5-G
: T 46 2 Mo B C 3 /
EN 758
T 46 2 Mo B M 3
EN ISO 17634-A : TMoBC/M1 H5
EN ISO 17634-B : T49T5-0M/C-2M3 H5
EN ISO 17632-A : T46 4MoBC/M3 H5
EN ISO 17632-B : T554T53M/CA-2M3 H5
FILTUB 14B is basic flux-cored wire recommended for welding creep resistant boiler plates, pipe steels and fine-grain
structural steels up to operating temperatures of 500C. Features of this wire include stable arc , low spatter, regular
bead appearance and good slag detachability.
Base materials:
Art of steel
Boiler plates and
Pipe steels :
Steels to API-Norm :
Finegrained steels :
Steel castings :
DIN :
17Mn4 , 19Mn5 , 15Mo3
16Mo5 , St 45.8 , StE 360.7
StE 385.7 , StE 415.7
X 52 , X 56 , X 60
StE 355 to StE 460
WStE 355 to WStE 460
TStE 355 to TStE 460
GS-52 , GS-60 , GS-20Mn5
GS-22Mo4
W.Nr. :
1.0481 , 1.0482 , 1.5415
1.5423 , 1.0405 , 1.0582
1.8970 , 1.8972
1.0562 to 1.8905
1.0565 to 1.8935
1.0566 to 1.8915
1.0552 , 1.0558 , 1.1120
1.5419
Heat treatment:
Type of wire :
basic
Welding current:
DC + / ( -)
Welding positions:
Shielding gas :
( EN 14175 )
CO2 , M 21
consumption : 12 - 18 l / min
Si
Mn
Mo
0,05
0,40
1,40
0,50
< 5 ml
Mechanical properties:
2
Yield strength
ReL / Rp 0.2 :
> 480
MPa(N/mm )
Tensile strength
Rm :
540 - 640
MPa(N/mm )
Elongation
A5 :
> 23
Impact energy
KV :
KV :
KV :
> 110
> 80
> 45
J ( + 20C)
J ( - 20C )
J ( - 40C )
Welding parameters
Current
A
mm
1,2
1,4
1,6
120 - 280
140 - 320
160 - 380
Date: 2013-06-12
4,5 - 13,0
4,0 - 11,0
3,0 - 10,0
Packing
K 300 , D 300
lay to lay
weight :
approx. 15 kg
V12
Classification:
AWS A-5.29
:E 80 T5-B2
EN 12071
:T Cr Mo 1 B C (M) 3
EN ISO 17634-A :TCrMo1BM/C 3H5
EN ISO 17634-B :T55T5-OM/C-1CM-H5
d.o.o.
FILTUB 16 B
FILTUB 16B is basic flux-cored wire recommended for welding creep resistant CrMo-alloy boiler plates, pipe
steels and cast steels for service temperatures up to 500C. Preheating dependent on thickness 160 - 190 C
is essential followed by post weld heat treatment at 700C. Features of this wire included stable arc with low
spatter, regular bead appearance and good slag detachability.
Base materials:
Art of steel
Boiler plates and
tubes :
Steel for the
cementation :
Steel castings :
DIN :
H IV L , 13CrMo44
16CrMoV4 , 11CrMo55
15Cr3 , 16MnCr5
20MnCr5 , 15CrMo5
GS-17CrMo55 , GS-22CrMo54
GS-17CrMnMo55
W.Nr. :
1.0447 , 1.7335
1.7728 , 1.7339
1.7015 , 1.7131
1.7147 , 1.7262
1.7357 , 1.7354
1.7352
Heat treatment:
Type of wire :
basic
Welding current:
DC + / ( -)
Welding positions:
Si
Mn
Cr
Mo
0,06
0,40
1,0
1,20
0,50
Shielding gas :
( EN 14175 )
CO2 , M 21
consumption : 12 - 18 l / min
< 5 ml
ReL / Rp 0.2:
Tensile strength
Rm:
> 460
MPa(N/mm )
2
550 - 650
MPa(N/mm )
Elongation
A5:
> 20
Impact energy
KV :
> 110
J ( +20C)
Hardness:
mm
1,2
1,4
1,6
Welding parameters
Current
Arc voltage Wire feed rate
A
V
m / min
120 - 280
140 - 320
160 - 380
Date: 2013-06-12
23 - 30
22 - 30
23 - 32
4,5 - 13,0
4,0 - 11,0
3,0 - 10,0
Packing
K 300 , D 300
lay to lay
weight :
approx. 15 kg
V13
Classification:
AWS-SFA-5.29 :E 80 T5-G
:T Cr Mo 2 B C (M) 3
EN 12071
EN ISO 17634-A :TCrMo2BM/C 3H5
EN ISO 17634-B :T62T5-OM/C-2C1M-H5
d.o.o.
FILTUB 18 B
FILTUB 18B is basic flux-cored wire recommended for welding creep resistant 2,2 % Cr and 1,0 % Mo alloy
boiler plates and pipe steels for service temperatures up to 600C. Preheat and interposes temperatures
175 15C. Post weld annealing at 690 - 720C 1 - 2 h and cooling down to 300C in furnace. Features of
this wire included stable arc with low spatter, regular bead appearance and good slag detachability.
Base materials:
Art of steel
Heat resistant steels :
Steel castings :
DIN :
10CrMo 9.10 , 10CrSiMoV
12CrSiMo8
GS-17CrMo9.10 , GS12CrMo9.10
GS-19CrMo9.10
W.Nr. :
1.7380 , 1.8075
1.7379 , 1.7380
1.7382
Heat treatment:
Type of wire :
basic
Welding current:
DC + / ( -)
Welding positions:
Si
Mn
Cr
Mo
0,06
0,40
0,90
2,20
1,0
Shielding gas :
( EN 14175 )
CO2 , M 21
consumption : 12 - 18 l / min
< 5 ml
ReL / Rp 0.2:
Tensile strength
Rm:
> 550
MPa(N/mm )
2
640 - 750
MPa(N/mm )
Elongation
A5:
> 16
Impact energy
KV :
> 47
J ( +20 C)
Hardness:
mm
1,2
1,4
1,6
Welding parameters
Current
Arc voltage Wire feed rate
A
V
m / min
120 - 280
140 - 320
160 - 380
Date: 2013-06-12
23 - 30
22 - 30
23 - 32
4,5 - 13,0
4,0 - 11,0
3,0 - 10,0
Packing
K 300 , D 300
lay to lay
weight :
approx. 15 kg
V14
Classification:
AWS-SFA-5.29 : E 90 T5-G
: T Cr Mo 2 B C (M) 3
EN 12071
d.o.o.
FILTUB 19 B
FILTUB 19B is basic flux-cored wire recommended for welding creep resistant 3,0 % Cr Mo V alloyed boiler plates and
pipe steels for service temperatures up to 600C. Preheat and interpass temperatures 200 - 250 C. Post weld annealing at
690 - 710C 1 - 2 h and cooling down to 300C. Features of this wire included stable arc with low spatter, regular bead
appearance and good slag detachability.
Base materials:
Art of steel
Creep resistant
finegrained steels
DIN :
10CrMo11
17CrMoV10
W.Nr. :
1.7276
1.7766
Heat treatment:
Type of wire :
basic
Welding current:
DC + / ( -)
Welding positions:
Si
Mn
Cr
Mo
0,10
0,25
0,60
3,0
0,30
0,15
Shielding gas :
( EN 14175 )
CO2 , M 21
consumption : 12 - 18 l / min
< 5 ml
Tensile strength
ReL / Rp 0.2:
Rm:
MPa(N/mm )
> 450
MPa(N/mm )
550 - 650
Elongation
A5:
> 22
Impact energy
KV :
KV :
KV :
> 140
> 120
> 100
J ( +20 C )
J ( 0 C )
J ( - 20 C )
mm
1,2
1,4
1,6
Welding parameters
Current
Arc voltage Wire feed rate
A
V
m / min
120 - 280
140 - 320
160 - 380
Date: 2013-06-12
23 - 30
22 - 30
23 - 32
4,5 - 13,0
4,0 - 11,0
3,0 - 10,0
Packing
K 300 , D 300
lay to lay
weight :
approx. 15 kg
V15
Classification:
AWS-SFA-5.29 : E 90 T5-G
: EN 758
d.o.o.
FILTUB 25 B
FILTUB 25B is basic flux-cored wire recommended for welding creep resistant CrMoV-alloy steels and cast steels for
service temperatures up to 550C. Preheat and interpass temperatures 170 - 200C. Post weld annealing at 690 - 710C 1 2h and cooling down to 300C in furnace. Features of this wire included stable arc with low spatter, regular bead
appearance and good slag detachability.
Base materials:
Art of steel
Creep resistant steels :
Cast steels :
DIN :
21CrMoV5 11 , 14CrMoV6 9
15CrMoV5 9
GS-17CrMoV 5 11 S
W.Nr.:
1.8070 , 1.7735
1.7706
Heat treatment:
Type of wire :
basic
Welding current:
DC + / ( -)
Welding positions:
Si
Mn
Cr
Mo
Ni
0,08
0,30
0,90
1,20
1,00
0,40
0,25
Shielding gas :
( EN 14175 )
CO2 , M 21
consumption : 12 - 18 l / min
< 5 ml
ReL / Rp 0.2:
MPa(N/mm )
> 500
MPa(N/mm )
Tensile strength
Rm:
660 - 800
Elongation
A5:
> 15
Impact energy
KV :
> 50
J ( +20 C)
Hardness:
mm
1,2
1,4
1,6
Welding parameters
Current
Arc voltage Wire feed rate
A
V
m / min
120 - 280
140 - 320
160 - 380
Date: 2013-06-12
23 - 30
22 - 30
23 - 32
4,5 - 13,0
4,0 - 11,0
3,0 - 10,0
Packing
K 300 , D 300
lay to lay
weight :
approx. 15 kg
V16
d.o.o.
Classification:
AWS-SFA-5.29 :E 90 T5-G
:T 50 6 1 Ni Mo B C 3 /
EN 758
T 50 6 1 Ni Mo B M 3
EN ISO 18276-A :T5561NiMoBC/M 3H5
EN ISO 18276-B :T626T4-3C/M-N2M2 H5
FILTUB 28 B
FILTUB 28B is medium alloy basic flux cored wire recommended for welding fine-grain structural steels and creep
2
resistant fine-grain structural steels up to yield strength of 600 N / mm . Features of this wire included excellent
mechanical properties at low temperatures, stable arc with low spatter, regular bead appearance and good slag
detachability .
Base materials:
Art of steel
Finegrained steels :
Creep resistant
finegrained steels :
Heat-treated
finegrained steels :
DIN :
StE 460 , StE 500
WStE 500 , TStE 460
TStE 500
NAXTRA 56 , NAXTRA 63
HY 80
WB 35 , WB 36
BHW 35 , BHW 38
W.Nr. :
1.8905 , 1.8907
1.8937 , 1.8915
1.8917
1.8944 , 1.8954
1.6780
1.8817 , 1.6368
1.8807
Heat treatment:
Type of wire :
basic
Welding current:
DC + / ( -)
Welding positions:
Shielding gas :
( EN 14175 )
CO2 , M 21
consumption : 12 - 18 l/min
Si
Mn
Ni
Mo
0,05
0,35
1,40
1,20
0,40
< 5 ml
Mechanical properties:
2
Yield strength
ReL / Rp 0.2:
> 560
MPa(N/mm )
Tensile strength
Rm:
650 - 750
MPa(N/mm )
Elongation
A5:
> 20
Impact energy
KV :
KV :
KV :
KV :
KV :
> 120
> 110
> 80
> 60
> 47
J ( + 20C )
J ( 0C )
J ( - 20C )
J ( - 40C )
J ( - 60 C)
mm
1,2
1,4
1,6
Welding parameters
Current
Arc voltage Wire feed rate
A
V
m / min
120 - 280
140 - 320
160 - 380
Date: 2013-06-12
23 - 30
22 - 30
23 - 32
4,5 - 13,0
4,0 - 11,0
3,0 - 10,0
Packing
K 300 , D 300
lay to lay
weight :
approx. 15 kg
V17
Classification:
AWS-SFA-5.29 : E 110 T5-K 4
: T 69 6 Mn 2Ni Cr Mo B M(C) 3
EN 12535
EN ISO 18276-A :T696Mn2NiCrMoBM/C 3H5
EN ISO 18276-B :T766T5-3M/CA-N4C1M2 H5
d.o.o.
FILTUB 32 B
FILTUB 32B is basic medium alloy flux-cored wire recommended for welding high-strength fine-grain structural steels
and creep resistant fine-grain structural steels. Optimal results are obtained at a heat input of E 15 kJ / cm and at an
interpass temperature of 100 - 150 C. Features of this wire included stable arc with low spatter, regular bead
appearance and good slag detachability.
Base materials:
Art of steel
Creep resistant
finegrained steels :
DIN :
NAXTRA 63 , NAXTRA 70
T 1 , T 1A , T 1B
( TStE 690 )
W.Nr. :
1.8954 , 1.8964
1.8920 , 1.8921 , 1.8922
Heat treatment:
Type of wire :
basic
Welding current:
DC + / ( -)
Welding positions:
Shielding gas :
( EN 14175 )
CO2 , M 21
consumption : 12 - 18 l / min
Si
Mn
Cr
Ni
Mo
0,05
0,35
1,40
0,40
2,20
0,40
< 5 ml
Mechanical properties:
Yield strength
ReL / Rp 0.2:
Tensile strength
Rm:
> 690
750 - 850
MPa(N/mm )
2
MPa(N/mm )
Elongation
A5:
> 16
Impact energy
KV :
KV :
KV :
KV :
KV :
> 80
> 70
> 60
> 55
> 47
J ( +20C )
J ( 0C )
J ( - 20C )
J ( - 40C )
J ( - 60C )
mm
1,2
1,4
1,6
Welding parameters
Current
Arc voltage Wire feed rate
A
V
m / min
120 - 280
140 - 320
160 - 380
Date: 2013-06-12
23 - 30
22 - 30
23 - 32
4,5 - 13,0
4,0 - 11,0
3,0 - 10,0
Packing
K 300 , D 300
lay to lay
weight :
approx. 15 kg
V18
Classification:
AWS-SFA-5.29 : E 80 T5-G
: T 42 6 2Ni B M 3
EN 758
EN ISO 17632-A :T428 2NiBM3 H5
EN ISO 17632-B :T498T5-3MA-N5 H5
d.o.o.
FILTUB 36 B
FILTUB 36B is medium alloy highly basic type flux cored wire recommended for welding fine grain structural steels
and cryolitic steels. Optimal results are obtained at a heat input of E 12 kJ / cm and interpass temperatures should
not exceed 120C. Features of this wire included stable arc with low spatter, regular bead appearance and good slag
detachability.
Base materials:
Art of steel
Finegrained steels :
Cryolitic steels :
DIN :
TStE 255 to TStE 380
EstE 255 to EStE 380
TTSt 35N , TTSt 35V
TTSt 41N , TTSt 41V
TTSt 45N , TTSt 45V
14Ni6 , 10Ni14
16Ni14
W.Nr. :
1.0463 to 1.8910
1.1103 to 1.8911
1.1101 , 1.1101
1.5622 , 1.5637
1.5639
Heat treatment:
Type of wire :
basic
Welding current:
DC + / ( -)
Welding positions:
Shielding gas :
( EN 14175 )
CO2 , M 21
consumption : 12 - 18 l / min
Si
Mn
Ni
0,05
0,25
0,90
2,50
< 5 ml
Mechanical properties:
2
Yield strength
ReL / Rp 0.2:
> 440
MPa(N/mm )
Tensile strength
Rm :
520 - 620
MPa(N/mm )
Elongation
A5:
> 26
Impact energy
KV :
> 160
> 100
> 47
J ( + 20 C )
J ( - 40 C )
J ( - 80 C )
mm
1,2
1,4
1,6
Welding parameters
Current
Arc voltage Wire feed rate
A
V
m / min
120 - 280
140 - 320
160 - 380
Date: 2013-06-12
23 - 30
22 - 30
23 - 32
4,5 - 13,0
4,0 - 11,0
3,0 - 10,0
Packing
K 300 , D 300
lay to lay
weight :
approx. 15 kg
V19
Classification:
AWS-SFA-5.29 :E 120 T5-G
EN 12535
: T89 4 Mn2Ni1CrMo B M3 H5
EN ISO 18276-A :T894Mn2Ni1CrMoBM3 H5
EN ISO 18276-B :T834T5-3MA-N4C2M2 H5
d.o.o.
FILTUB 38 B
FILTUB 38B is medium alloy highly basic type flux cored wire recommended for welding high-strength fine grain
structural steels with yield strength up to 880 N / mm2. Optimal results are obtained at a heat input of E 15 kJ / cm and
interpass temperatures should not exceed 150C. Features of this wire included stable arc with low spatter, regular bead
appearance and good slag detachability.
Base materials:
Art of steel
Finegrained steels :
Creep resistant
finegrained steels :
DIN
StE 460 , StE 500
WStE 500 , TStE 460
TStE 500
NAXTRA 56 , NAXTRA 63
HY 80
WB 35 , WB 36
BHW 35 , BHW 38
XABO 620 , XABO 890 , XABO 960
W.Nr. :
1.8905 , 1.8907
1.8937 , 1.8915
1.8917
1.8944 , 1.8954
1.6780
1.5403 , 1.6368
1.8807
1.8914 , 1.8925 , 1.8933
Heat treatment:
Type of wire :
basic
Welding current:
DC + / ( -)
Welding positions:
Shielding gas :
( EN 14175 )
M 21
consumption : 12 - 18 l / min
Si
Mn
Cr
Ni
Mo
0,05
0,45
1,60
1.0
2,10
0,40
< 5 ml
Mechanical properties:
2
Yield strength
ReL / Rp 0.2:
> 880
MPa(N/mm )
Tensile strength
Rm:
940 - 1050
MPa(N/mm )
Elongation
A5 :
> 14
Impact energy
KV :
KV :
KV :
> 60
> 55
> 47
J ( 0C )
J ( - 20C )
J ( - 40C )
mm
1,2
1,4
1,6
Welding parameters
Current
Arc voltage Wire feed rate
A
V
m / min
120 - 280
140 - 320
160 - 380
Date: 2013-06-12
23 - 30
22 - 30
23 - 32
4,5 - 13,0
4,0 - 11,0
3,0 - 10,0
Packing
K 300 , D 300
lay to lay
weight :
approx. 15 kg
V20
Classification:
AWS-SFA-5.29
EN 758
EN ISO 17632-A
EN ISO 17632-B
d.o.o.
: E 80 T5-G
: T 46 6 1Ni B C 3
: T466ZBM/C 3H5
: T556T5-3M/CA-G H5
FILTUB 40 B
FILTUB 40B is highly basic medium alloy lux-cored wire recommended for welding Ni Cu-alloyed steels, resistant to
atmospheric corrosion and fine-grain structural steels such as Corten , Patinax , Acor and similar. Features of this wire
include excellent mechanical properties at low temperatures, stable arc with low spatter, regular bead appearance and
good slag detachability.
Base materials:
Art of steel
Weather corroion resistant
steels :
Fine-grain structural
steels :
DIN :
StE 420 , StE 460
ACOR 37-2 , ACOR 37-3 , ACOR 52-3
CORTEN A,B
Patinax 37
WStE 420 , WStE 460
TStE 420 , TStE 460
EStE 420 , EStE 460
W.Nr. :
1.8902 , 1.8905
1.8960 , 1.8961 , 1.8963
1.8962 , 1.8963
1.8960
1.8932 , 1.8935
1.8912 , 1.8915
1.8913 , 1.8918
Heat treatment:
Type of wire :
basic
Welding current:
DC + / ( -)
Welding positions:
Shielding gas :
( EN 14175 )
CO2 , M 21
consumption : 12 - 18 l / min
Si
Mn
Ni
Cu
0,05
0,35
1,20
> 0,020
> 0,020
1,20
0,50
< 5 ml
Mechanical properties:
2
Yield strength
ReL / Rp 0.2:
> 470
MPa(N/mm )
Tensile strength
Rm:
540 - 640
MPa(N/mm )
Elongation
A5:
> 24
Impact energy
KV :
KV :
KV :
> 130
> 90
> 47
J ( + 20C )
J ( - 20C )
J ( - 60C )
mm
1,2
1,4
1,6
Welding parameters
Current
Arc voltage Wire feed rate
A
V
m / min
120 - 280
140 - 320
160 - 380
Date: 2013-06-12
23 - 30
22 - 30
23 - 32
4,5 - 13,0
4,0 - 11,0
3,0 - 10,0
Packing
K 300 , D 300
lay to lay
weight :
approx. 15 kg
V21
Classification:
AWS A-5.29 : E 110 T5 - G
EN 758
: -
d.o.o.
FILTUB 42 B
FILTUB 42B is highly basic medium alloy flux-cored wire recommended for welding and hard surfacing of forming and
stamping tools dies, rollers and similar components. Preheating and interpass temperatures should be adjusted
depending on the base material. Mechanical properties of weld metal dependent upon heat treatment. Features of this
wire include stable arc with low spatter, regular bead appearance and good slag detachability.
Base materials:
Art of steel
Machine and tool
steels :
Steel castings :
DIN :
34CrNiMo6 , 30CrNiMo8 , 34CrMo4
25CrMo4 , 28NiCrMo4 ,28NiCrMo5 5
32NiCrMo8 5
GS-24CrNiMo3 2 5
W.Nr. :
1.6582 , 1.6580 , 1.7220
1.7218 , 1.6513 , 1.6732
1.6581
1.6552
Heat treatment:
Type of wire :
basic
Welding current:
DC + / ( -)
Welding positions:
Shielding gas :
( EN 14175 )
CO2 , M 21
consumption : 12 - 18 l / min
Si
Mn
Cr
Ni
Mo
0,12
0,35
1,10
1,00
2,20
1,00
< 5 ml
Mechanical properties:
2
Yield strength
ReL / Rp 0.2:
> 720
MPa(N/mm )
Tensile strength
Rm:
840 - 950
MPa(N/mm )
Elongation
A5:
> 15
Impact energy
KV :
> 55
J ( + 20 C)
Hardness:
mm
1,2
1,4
1,6
Welding parameters
Current
Arc voltage Wire feed rate
A
V
m / min
120 - 280
140 - 320
160 - 380
Date: 2013-06-12
23 - 30
22 - 30
23 - 32
4,5 - 13,0
4,0 - 11,0
3,0 - 10,0
Packing
K 300 , D 300
lay to lay
weight :
approx. 15 kg
V22
Classification:
DIN 8555 : MSG 1-GF-C1-250/
MSG 1-GF-M21-250
EN 14700 : T Fe1
d.o.o.
FILTUB DUR 3
FILTUB DUR 3 is rutile medium alloyed flux-cored wire recommended for wear-resistant and impact-resistant
surfacing in the medium hardness range. It is also useful as a buffer layer of difficult-to-weld steels. The temperature
between runs should not exceed 250C. The deposit is good machine able and suitable for flame and induction
hardening. Suitable for surfacing parts of: caterpillar track rollers, guide rolls, railway tires, running wheels, etc.
Base materials:
Steels
Steel castings
Heat treatment:
Type of wire :
rutile
Welding current:
DC + / ( -)
Si
Mn
Cr
0,16
0,40
1,40
0,80
Welding positions:
Mechanical properties:
Shielding gas :
( EN 14175 )
CO2 , M 21
consumption : 12 - 18 l / min
Hardness:
225 - 275 HB
mm
1,2
1,4
1,6
Welding parameters
Current
Arc voltage Wire feed rate
A
V
m / min
120 - 300
140 - 350
160 - 400
Date: 2013-06-12
22 - 30
23 - 33
24 - 35
4,0 - 14,0
3,5 - 13,0
4,0 - 12,0
Packing
K 300 , D 300
lay to lay
weight :
approx. 15 kg
V23
Classification:
DIN 8555 : MSG 1 GF M21 300
MSG 1 GF C1 300
EN 14700: T Fe1
d.o.o.
FILTUB DUR 4
FILTUB DUR 4 is metal cored medium alloyed flux-cored wire recommended for hard surfacing of steels in the
medium hardness range. The deposit is tough, free of cracks and porosity and therefore is highly resistant to
deformation and impact. On base materials with low weld ability is recommended depositing a buffer layer with
FILTUB 12B. The temperature between runs should not exceed 250C. Machine able with ordinary cutting tools is
possible. Suitable for surfacing parts of: crane wheels, wheels for mine trucks, pulleys, rollers, wobblers,
caterpillar track rollers etc.
Base materials:
Steels
Cast steels
Heat treatment:
Type of wire :
Metal cored
Welding current:
DC + / ( -)
Welding positions:
Si
Mn
Cr
0,14
0,60
1,50
1,20
< 5 ml
Mechanical properties:
Shielding gas :
( EN 14175 )
CO2 , M 21
consumption : 12 - 18 l / min
Hardness:
275 - 325 HB
mm
1,2
1,4
1,6
Welding parameters
Current
Arc voltage Wire feed rate
A
V
m / min
120 - 300
140 - 350
160 - 400
Date : 2013-06-12
22 - 30
23 - 33
24 - 35
4,0 - 14,0
3,5 - 13,0
4,0 - 12,0
Packing
K 300 , D 300
lay to lay
weight :
approx. 15 kg
V24
Classification:
DIN 8555 : MSG 1-GF-C1-350 P/
MSG 1-GF-M21-350 P
EN 14700 : T Fe1
d.o.o.
FILTUB DUR 5
FILTUB DUR 5 is rutile medium alloyed flux-cored wire recommended for hard surfacing of steels in the medium
hardness range. The deposit is tough, free of cracks and porosity and therefore is highly resistant to deformation and
impact. On base materials with low weldability is recommended depositing a buffer layer with FILTUB 12B. The
temperature between runs should not exceed 250C. Machine able with ordinary cutting tools is possible. Suitable for
surfacing parts of: crane wheels, wheels for mine trucks, pulleys, rollers, wobblers, caterpillar track rollers etc.
Base materials:
Steels
Steel castings
Heat treatment:
Type of wire :
rutile
Welding current:
DC + / ( -)
Welding positions:
Shielding gas :
( EN 14175 )
CO2 , M 21
consumption : 12 - 18 l / min
Si
Mn
Cr
0,23
0,60
1,50
1,60
Mechanical properties:
Hardness:
325 - 375 HB
mm
1,2
1,4
1,6
Welding parameters
Current
Arc voltage Wire feed rate
A
V
m / min
120 - 300
140 - 350
160 - 400
Date: 2013-06-12
22 - 30
23 - 33
24 - 35
4,0 - 14,0
3,5 - 13,0
4,0 - 12,0
Packing
K 300 , D 300
lay to lay
weight :
approx. 15 kg
V25
Classification:
DIN 8555 : MSG 5-GF-C1-40 P /
MSG 5-GF-M21-40 P
EN 14700 : T Fe2
d.o.o.
FILTUB DUR 12
FILTUB DUR 12 is metal cored medium alloyed flux-cored wire recommended for wear resistant surfacing. The
deposit is tough, free of cracks and porosity and therefore is highly resistant to deformation and impact. On the base
material with low weld ability is recommended depositing a buffer layer with FILTUB 12B. The temperature between
runs should not exceed 250C. The weld metal is still machineable by means of sintered carbide tools. Suitable for
surfacing parts of: supports, bearing surfaces, rollers, excavator parts etc.
Base materials:
Steels
Steel castings
Heat treatment:
Type of wire :
metal
Welding current:
DC + / ( -)
Si
Mn
Cr
Mo
0,09
0,60
1,50
5,50
1,00
Welding positions:
Mechanical properties:
Shielding gas :
( EN 14175 )
CO2 , M 21
consumption : 12 - 18 l / min
Hardness:
37 - 42 HRC
mm
1,2
1,4
1,6
Welding parameters
Current
Arc voltage Wire feed rate
A
V
m / min
120 - 340
140 - 360
160 - 440
Date:2013-06-12
22 - 32
23 - 34
24 - 36
4,0 - 15,0
3,5 - 14,0
4,0 - 13,0
Packing
K 300 , D 300
lay to lay
weight :
approx. 15 kg
V26
Classification:
DIN 8555 : MSG 6-GF-C1-55 GP/
MSG 6-GF-M21-55 GP
EN 14700 : T Fe2
d.o.o.
FILTUB DUR 14
FILTUB DUR 14 is metal cored medium alloyed flux-cored wire recommended for high wear resistant surfacing. The
deposit is tough, free of cracks and porosity and therefore is highly resistant to deformation and impact. On base
material with low weldability is recommended depositing a buffer layer with FILTUB 12B. The preheat and interpass
temperature must be at least 200C. Weld deposit can be machined only by grinding. Suitable for surfacing parts of:
mixer blades and vessels grab and bucket teethes, crusher hammers and jaws etc.
Base materials:
Steels
Steel castings
Heat treatment:
Type of wire :
metalcored
Welding current:
DC + / ( -)
Welding positions:
Shielding gas :
( EN 14175 )
Si
Mn
Cr
Mo
0,30
0,40
1,5 0
5,50
0,50
Mechanical properties:
Hardness:
48 - 53 HRC
CO2 , M 21
consumption : 12 - 18 l / min
mm
1,2
1,4
1,6
Welding parameters
Current
Arc voltage Wire feed rate
A
V
m / min
120 - 340
140 - 360
160 - 440
Date: 2013-06-12
22 - 32
23 - 34
24 - 36
4,0 - 15,0
3,5 - 14,0
4,0 - 13,0
Packing
K 300 , D 300
lay to lay
weight :
approx. 15 kg
V27
Classification:
DIN 8555 : MSG 5 GF-M21- 50-P
MSG 5 GF-C1 - 50-P
EN 14700 : Fe 3
d.o.o.
FILTUB DUR 15
FILTUB DUR 15 is metal-cored medium alloy flux-cored wire recommended for GMAW hard facing all kinds of
cold and hot pneumatic tools, cold and hot cutting shears for plate pressing dies .The deposit is tough, free of
cracks and porosity and therefore is highly resistant to deformation and impact . On base material with low
weldability is recommended depositing a buffer layer with FILTUB 12B or FILTUB DUR 3.The preheat and
interpass temperature must be at least 200C.
Base materials:
Steels
Cast steels
Heat treatment:
Type of wire :
metal-cored
Welding current:
DC + / ( -)
Welding positions:
Si
Mn
Cr
0,45
0,95
0,30
1,05
0,18
1,95
< 5 ml
Mechanical properties:
Shielding gas :
( EN 439 )
CO2 , M 21
consumption : 12 - 18 l / min
Hardness:
47 - 52 HRC
mm
1,2
1,4
1,6
Welding parameters
Current
Arc voltage Wire feed rate
A
V
m / min
120 - 340
140 - 360
160 - 440
Date:2013-06-12
22 - 32
23 - 34
24 - 36
4,0 - 15,0
3,5 - 14,0
4,0 - 13,0
Packing
K 300 , D 300
lay to lay
weight :
approx. 15 kg
V28
Classification:
DIN 8555 : MSG 6 GF-M21/C1- 55-P
EN 14700: T Fe3
d.o.o.
FILTUB DUR 15.1 is metal cored medium alloy flux-cored wire recommended for hard surfacing which martensitic
deposit giving a very good resistance to solid erosion wear with heavy impact. The deposit is tough, free of cracks
and porosity and therefore is highly resistant to deformation and impact. On base materials with low weldability it
is recommended to deposit a buffer layer with FILTUB 12B or FILTUB DUR 3.The preheat and interpass
temperature must be at least 250C. Suitable for surfacing parts of: impact rock drills, bucket teeth and lips, screw
conveyors, etc.
Base materials:
Steels
Cast steels
Heat treatment:
Type of wire :
metalcored
Welding current:
DC + / ( -)
Welding positions:
Si
Mn
Cr
0,50
2,70
0,50
9,50
< 5 ml
Mechanical properties:
Shielding gas :
( EN 14175 )
CO2 , M 21
consumption : 12 - 18 l / min
Hardness:
53 - 56 HRC
mm
1,6
2,0
Welding parameters
Current
Arc voltage Wire feed rate
A
V
m / min
140 - 360
160 - 440
Date: 2013-06-12
23 - 34
24 - 36
3,5 - 14,0
4,0 - 13,0
Packing
K 300 , D 300
lay to lay
weight :
approx. 15 kg
V29
Classification:
DIN 8555 : MSG 6-GF-C1-60 GP/
MSG 6-GF-M21-60 GP
EN 14700 : T Fe 2
d.o.o.
FILTUB DUR 16
FILTUB DUR 16 is metal cored medium alloy flux-cored wire recommended for highly wear resistant surfacing. The
deposit is tough, free of cracks and porosity and therefore is highly resistant to deformation and impact. On base material
with low weldability is recommended depositing a buffer layer with FILTUB 12B or FILTUB DUR 3.The preheat and
interpass temperature must be at least 200C. Weld deposit can be machined only by grinding. Suitable for surfacing
parts of: mixer blades and vessels, grab and bucket teethes, crusher hammers and jaws, etc .
Base materials:
Steels
Steel castings
Heat treatment:
Type of wire :
metalcored
Welding current:
DC + / ( -)
Si
Mn
Cr
Mo
0,45
0,60
1,60
5,50
0,80
Welding positions:
Mechanical properties:
Shielding gas :
( EN 14175 )
CO2 , M 21
consumption : 12 - 18 l / min
Hardness:
56 - 60 HRC
mm
1,2
1,4
1,6
Welding parameters
Current
Arc voltage Wire feed rate
A
V
m / min
120 - 340
140 - 360
160 - 440
Date: 2013-06-12
22 - 32
23 - 34
24 - 36
4,0 - 15,0
3,5 - 14,0
4,0 - 13,0
Packing
K 300 , D 300
lay to lay
weight :
approx. 15 kg
V30
Classification:
DIN 8555 : MSG 5-GF-C1-40 P /
MSG 5-GF-M21-40 P
EN 14700 : T Fe3
d.o.o.
FILTUB UTOP 38
FILTUB UTOP 38 is metal medium alloy flux-cored wire recommended for hot and cold work tools surfacing. The
deposit is tough, free of cracks and porosity and therefore is highly resistant to deformation and impact. The weld metal
is still machineable by means of sintered carbide tools. On the base material with low weldability it is recommended to
deposit a buffer layer with FILTUB 12B. Suitable for hard surfacing cold and hot working tools such as: screws, nuts,
dies and containers for metal tube and rod extrusion tools for manufacture of hollow bodies, pressure die casting dies,
etc.
Base materials:
Heat treatment:
Type of wire :
metal
Welding current:
DC + / ( -)
Si
Mn
Cr
Mo
Ni
0,08
0,40
0,90
5,0
3,3
0,7
0,2
0,15
Welding positions:
Mechanical properties:
Shielding gas :
( EN 14175 )
CO2 , M 21
consumption : 12 - 18 l / min
Hardness:
36 - 42 HRC
mm
1,2
1,4
1,6
Welding parameters
Current
Arc voltage Wire feed rate
A
V
m / min
120 - 340
140 - 360
160 - 440
Date: 2012-06-12
22 - 32
23 - 34
24 - 36
4,0 - 15,0
3,5 - 14,0
4,0 - 13,0
Packing
K 300 , D 300
lay to lay
weight :
approx. 15 kg
V31
Classification:
DIN 8555 : MSG 6-GF-C1-55 GP /
MSG 6-GF-M21-55 GP
EN 14700 : T Fe8
d.o.o.
FILTUB UTOP 55
FILTUB UTOP 55 is metal medium alloy flux-cored wire recommended for hard surfacing of cold and hot- working steel
tools up to operating temperatures of 550C. The deposit is tough, free of cracks and therefore is highly resistant to
deformation and impact. Weld deposit can be machined only by grinding. On base material with low weld ability is
recommended depositing a buffer layer with FILTUB 12B. Suitable for hard surfacing cold and hot working tools such as:
screws, nuts, dies and containers for metal tube and rod extrusion tools for manufacture of hollow bodies, hot shear blades,
pressure die casting dies etc.
Base materials:
Heat treatment:
Type of wire :
metal
Welding current:
DC + / ( -)
Si
Mn
Cr
Mo
0,50
0,40
0,90
5,0
5,0
0,60
0,15
Welding positions:
Mechanical properties:
Shielding gas :
( EN 14175 )
CO2 , M 21
consumption : 12 - 18 l / min
Hardness:
53 - 60 HRC
mm
1,2
1,4
1,6
Welding parameters
Current
Arc voltage Wire feed rate
A
V
m / min
120 - 340
140 - 360
160 - 440
Date: 2013-06-12
22 - 32
23 - 34
24 - 36
4,0 - 15,0
3,5 - 14,0
4,0 - 13,0
Packing
K 300 , D 300
lay to lay
weight :
approx. 15 kg
V32
Classification:
DIN 8555: MSG 6-GF-M21-55-GP
MSG 6-GF-C1-55-GP
EN 14700: TFe3
d.o.o.
FILTUB UTOP Co
FILTUB UTOP Co is metal cored medium alloy flux-cored wire recommended for hard surfacing of cold and hot
working steel tools up to operating temperatures of 550C. The deposit is tough, free of cracks and therefore is
highly resistant to deformation and impact. Weld deposit can be machined only by grinding. On base material with
low weldability is recommended depositing a buffer layer with FILTUB 12B. Suitable for hard surfacing cold and
hot working tools such as: screws, nuts, dies and containers for metal tube and rod extrusion tools for
manufacture of hollow bodies, hot shear blades, pressure die casting dies etc.
Base materials:
Alloyed tool steels
Heat treatment:
Type of wire :
metalcored
Welding current:
DC + / ( -)
Welding positions:
Si
Mn
Cr
Nb
> 0,35
1,0
1,0
1,8
0,8
8,0-9,0
< 5 ml
Co
1,8-2,3
Mechanical properties:
Shielding gas :
( EN 14175 )
CO2 , M 21
consumption : 12 - 18 l / min
Hardness:
47-52 HRC
mm
1,2
1,4
1,6
Welding parameters
Current
Arc voltage Wire feed rate
A
V
m / min
120 - 340
140 - 360
160 - 440
2013-06-12
22 - 32
23 - 34
24 - 36
4,0 - 15,0
3,5 - 14,0
4,0 - 13,0
Packing
K 300 , D 300
lay to lay
weight :
approx. 15 kg
V33
Classification:
DIN 8555 :MSG 5 GF M21 50-GP
MSG 5 GF C1 50-GP
EN 14700 :T Fe3
d.o.o.
FILTUB UTOP Mo1 is metal cored medium alloy flux-cored wire recommended for hard surfacing of cold and hot
working steel tools up to operating temperatures of 550C. The deposit is tough, free of cracks and therefore is highly
resistant to deformation and impact. On base material with low weldability is recommended depositing a buffer layer with
FILTUB 12B.
Suitable for hard surfacing cold and hot working tools such as: screws, nuts, dies and containers for metal tube and rod
extrusion tools for manufacture of hollow bodies, hot shear blades, pressure dies, casting dies etc.
Base materials:
Heat treatment:
Type of wire :
metalcored
Welding current:
DC + / ( -)
Welding positions:
Si
Mn
Cr
Ni
Mo
Cu
0,42
1,0
0,35
5,06
0,24
1,28
0,25
0,35
0,24
< 5 ml
Mechanical properties:
Shielding gas :
( EN 14175 )
CO2 , M 21
consumption : 12 - 18 l / min
Hardness:
47 - 52 HRC
mm
1,2
1,4
1,6
Welding parameters
Current
Arc voltage Wire feed rate
A
V
m / min
120 - 340
140 - 360
160 - 440
2013-06-12
22 - 32
23 - 34
24 - 36
4,0 - 15,0
3,5 - 14,0
4,0 - 13,0
Packing
K 300 , D 300
lay to lay
weight :
approx. 15 kg
V34
Classification:
EN ISO 14717-A: S 46 4FB T3
AWS-SFA-5.23 : F 7 A 4-EC-G
d.o.o.
FILTUB 112
FILTUB 112 is basic low-alloy flux-cored wire recommended for submerged arc welding non-alloyed structural steels,
boiler plates, pipe steels and fine-grain structural steels. Also is suitable for welding steels with high C content as a buffer
layer. This wire is used in combination with welding flux FB T.
Base materials:
Art of steel
Non-alloyed steels :
Boiler plates :
Pipe steels :
Finegrained steels :
DIN :
St 33 to St 70
H I , H II , 17Mn4 , 19Mn5
St 37-0 to St 52-0 , St-37-4 to St-52-4
StE 210.7 to StE 360.7
StE 255 to StE 355
WStE 255 to WStE 355
TStE 255 to TStE 355
W.Nr. :
1.0033 to 1.0070
1.0345 , 1.0425 , 1.0481 , 1.0482
1.0254 to 1.0421 , 1.0255 to 1.0581
1.0307 to 1.0582
1.0461 to 1.0562
1.0462 to 1.0565
1.0463 to 1.0566
Heat treatment:
Type of wire :
basic
Welding current:
DC + and AC
Si
Mn
0,05
0,20
1,60
< 3 ml
Mechanical properties:
Welding flux :
FB TT
Yield strength
ReL / Rp 0.2:
> 460
MPa(N/mm )
Tensile strength
Rm:
550 - 650
MPa(N/mm )
Elongation
A5:
> 24
Impact energy
KV :
KV :
KV :
> 160
> 140
> 100
J ( 0 C )
J ( - 20 C )
J ( - 40 C )
Packing
mm
3,2
4,0
Welding parameters
Current
Arc voltage
A
V
350 - 600
400 - 800
26 - 33
27 - 39
Date: 2010-06-18
1,2 - 2,4
0,8 - 2,2
V35
Classification:
EN ISO 24 589-A: SMo FB
EN ISO 24 589-B: S 554 FB TU1M3
AWS-SFA-5.23 : F 7 A 4-EC-A 4
d.o.o.
FILTUB 114
FILTUB 114 is basic medium alloy flux-cored wire recommended for submerged arc welding creep resistant steels,
designed for creep strength at service temperatures up to 500C. This wire is used in combination with welding flux FB
TT.
Base materials:
Art of steel
Boiler plates and
pipe steels :
Finegrained steels :
Steel castings :
DIN :
17Mn4 , 19Mn5 , 15Mo3
16Mo5 , St 45.8 , StE 360.7
StE 385.7 , StE 415.7
StE 355 to StE 460
WStE 355 to WStE 460
TStE 355 to TStE 460
GS-52 , GS-60 , GS-20Mn5
GS-22Mo4
W.Nr. :
1.0481 , 1.0482 , 1.5415
1.5423 , 1.0405 , 1.0582
1.8970 , 1.8972
1.0562 to 1.8905
1.0565 to 1.8935
1.0566 to 1.8915
1.0552 , 1.0558 , 1.1120
1.5419
Heat treatment:
Type of wire :
basic
Welding current:
DC + and AC
Si
Mn
Mo
0,05
0,20
1,40
0,5
< 3 ml
Mechanical properties:
Welding flux :
FB TT
Yield strength
ReL / Rp 0.2:
> 450
MPa(N/mm )
Tensile strength
Rm:
540 - 640
MPa(N/mm )
Elongation
A5:
> 24
Impact energy
KV :
KV :
KV :
KV :
> 180
> 160
> 140
> 80
J(
J(
J(
J(
+ 20 C)
0 C)
- 20 C)
- 40 C)
m
3,2
4,0
Welding parameters
Current
Arc voltage
A
V
350 - 600
26 - 33
400 - 800
27 - 39
Date: 2009-06-10
V36
Classification:
AWS-SFA-5.23 : F 8 P 0-EC-B 2
d.o.o.
FILTUB 116
FILTUB 116 is basic medium alloy flux-cored wire recommended for submerged arc welding creep resistant steels
designed for creep strength at service temperatures up to 600C. The weld metal must be post weld annealing at 690 720C and cooling down to 300C in furnace. The wire is used in combination with welding flux FB TT.
Base materials:
Art of steel
Boiler plates and
tubes :
Steel for the
cementation :
Steel castings :
DIN :
H IV L , 13CrMo44
16CrMoV4 , 11CrMo55
15Cr3 , 16MnCr5
20MnCr5 , 15CrMo5
GS-17CrMo55 , GS-22CrMo54
GS-17CrMnMo55
W.Nr. :
1.0447 , 1.7335
1.7728 , 1.7339
1.7015 , 1.7131
1.7147 , 1.7262
1.7357 , 1.7354
1.7352
Heat treatment:
Type of wire :
basic
Welding current:
DC + and AC
Si
Mn
Cr
Mo
0,05
0,20
1,0
1,20
0,50
< 5 ml
Mechanical properties:
Welding flux :
FB TT
Yield strength
ReL / Rp 0.2:
> 410
MPa(N/mm )
Tensile strength
Rm:
530 - 600
MPa(N/mm )
Elongation
A5:
> 22
Impact energy
KV :
> 110
J ( + 20 C)
mm
3,2
4,0
Welding parameters
Current
Arc voltage
A
V
350 - 600
26 - 33
400 - 800
27 - 39
Date:2009-06-10
V37
Classification:
AWS-SFA-5.23 : F8 PO-EC-B3
d.o.o.
FILTUB 118
FILTUB 118 is basic medium alloy flux-cored wire recommended for submerged arc welding creep resistant CrMo,
CrMoV steels and similar cast steels, designed for creep strength at service temperatures up to 600C. The weld metal
must be post weld annealing at 690 - 720 C, 1 - 2 h and cooling down to 300C in furnace. The wire is used in
combination with welding flux FB TT.
Base materials:
Art of steel
Heat resistant steels :
Steel castings :
DIN :
10CrMo 9.10 , 10CrSiMoV
12CrSiMo8
GS-17CrMo9.10 , GS12CrMo9.10
GS-19CrMo9.10
W.Nr. :
1.7380 , 1.8075
1.7379 , 1.7380
1.7382
Heat treatment:
Type of wire :
basic
Welding current:
DC + and AC
Si
Mn
Cr
Mo
0,09
0,20
0,80
2,40
1,0
< 3 ml
Mechanical properties:
Welding flux :
FB TT
Yield strength
ReL / Rp 0.2:
> 440
MPa(N/mm )
Tensile strength
Rm:
560 - 630
MPa(N/mm )
Elongation
A5:
> 21
Impact energy
KV :
> 100
J ( + 20 C)
mm
3,2
4,0
Welding parameters
Current
Arc voltage
A
V
350 - 600
400 - 800
26 - 33
27 - 39
Date:2009-06-10
Packing
Wire coil sizes :
420x280x90
Weight : 22 - 29 kg ;
K 415
Weight : appr. 25 kg
V38
Classification:
AWS-SFA-5.23 : F 7 A 8-EC-G
d.o.o.
FILTUB 126
FILTUB 126 is basic medium alloyed flux-cored wire recommended for submerged arc welding of high-strength
fine-grain structural steels. The mechanical properties are dependent on the working conditions. Optimal results
are obtained at a heat input of E < 22 kJ / cm and interpass temperatures must not exceed 150. The wire is used
in combination with welding flux FB TT.
Base materials:
Art of steel
Fine-grain structural steels :
DIN :
St E 355 to St E 460
W St E 355 to W St E 460
T St E 355 to T St E 460
E St E 355 to E St E 460
W.Nr. :
1.0562 to 1.8905
1.0565
1.0566 to 1.8915
1.1106
Heat treatment:
Type of wire :
basic
Welding current:
DC + and AC
Si
Mn
Ni
0,05
0,20
1,30
1,5
< 3 ml
Mechanical properties:
Welding flux :
FB TT
Yield strength
N/mm2
Tensile strength
Rm:
540 - 620
N/mm2
Elongation
A5:
> 24
Impact energy
Av
Av
Av
Av
:
:
:
:
> 160
> 140
> 100
> 60
J(
J(
J(
J(
+20 C )
- 20 C )
- 40 C )
- 60 C )
mm
3,2
4,0
Welding parameters
Current
Arc voltage
A
V
350 - 600
400 - 800
Date: 2012-01-10
26 - 33
27 - 39
Packing
Wire coil sizes :
420x280x90
Weight : 22 - 29 kg ;
K 415
Weight : appr. 25 kg
V39
Classification:
AWS-SFA-5.23 : F 9 A 8-EC-G
d.o.o.
FILTUB 128
FILTUB 128 is basic medium alloy flux-cored wire recommended for submerged arc welding fine-grain structural steels,
creep resistant and heat-treated fine-grain structural steels. The mechanical properties are dependent on the working
conditions. Optimal results are obtained at a heat input of E < 22 kJ / cm and interpass temperatures must not exceed
150. The wire is used in combination with welding flux FB TT.
Base materials:
Art of steel
Finegrained steels :
Creep resistant
finegrained steels :
Heat-treated
finegrained steels :
DIN :
StE 460 , StE 500
WStE 500 , TStE 460
TStE 500
NAXTRA 56 , NAXTRA 63
HY 80
WB 35 , WB 36
BHW 35 , BHW 38
W.Nr. :
1.8905 , 1.8907
1.8937 , 1.8915
1.8917
1.8944 , 1.8954
1.6780
1.8817 , 1.6368
1.8807
Heat treatment:
Type of wire :
basic
Chemical composition, wt %:
Welding current:
DC + and
AC
Si
Mn
Ni
Mo
0,05
0,20
1,40
1,20
0,40
< 3 ml
Mechanical properties:
Welding flux :
FB TT
Yield strength
ReL / Rp 0.2:
> 550
MPa(N/mm )
Tensile strength
Rm:
630 - 730
MPa(N/mm )
Elongation
A5:
> 20
Impact energy
KV :
KV :
KV :
KV :
> 160
> 120
> 100
> 60
J
J
J
J
( + 20C )
( - 20C )
( - 40C )
( - 60C )
mm
3,2
4,0
Welding parameters
Current
Arc voltage
A
V
350 - 600
400 - 800
26 - 33
27 - 39
Date: 2009-06-10
Packing
Wire coil sizes :
420x280x90
Weight : 22 - 29 kg ;
K 415
Weight : appr. 25 kg
V40
Classification:
EN ISO 26 304-A: S696FBT3Ni2.5NiCrMo
EN ISO 26 304-B: S78A6FB TUN5CM3
AWS-SFA-5.23 : F 11 A 8-EC-F5
d.o.o.
FILTUB 132
FILTUB 132 is basic medium alloy flux-cored wire recommended for submerged arc welding of high-strength fine-grain
structural steels. The mechanical properties are dependent on the working conditions. Optimal results are obtained at a
heat input of E > 18 kJ / cm and interpass temperatures must not exceed 150C. The wire is used in combination with
welding flux FB TT.
Base materials:
Art of steel
Creep resistant
finegrained steels :
DIN :
NAXTRA 63 , NAXTRA 70
T 1 , T 1A , T 1B
( TStE 690 )
W.Nr. :
1.8954 , 1.8964
1.8920 , 1.8921 , 1.8922
Heat treatment:
Type of wire :
basic
Welding current:
DC + and AC
Si
Mn
Cr
Ni
Mo
0,05
0,20
1,40
0,60
2,5
0,40
< 3 ml
Mechanical properties:
Welding flux :
FB TT
Yield strength
ReL / Rp 0.2:
> 680
Tensile strength
Rm:
740 - 820
MPa(N/mm )
Elongation
A5:
> 16
Impact energy
KV
KV
KV
KV
> 120
> 90
> 70
> 47
J(
J(
J(
J(
:
:
:
:
MPa(N/mm )
2
+20 C )
- 20 C )
- 40 C )
- 60 C )
mm
3,2
4,0
Welding parameters
Current
Arc voltage
A
V
350 - 600
400 - 800
26 - 33
27 - 39
Date: 2009-06-10
Packing
Wire coil sizes :
420x280x90
Weight : 22 - 29 kg ;
K 415
Weight : appr. 25 kg
V41
Classification:
AWS-SFA-5.23 : F 7 A15-EC-Ni 2
d.o.o.
FILTUB 136
FILTUB 136 is basic medium alloy flux-cored wire recommended for submerged arc welding fine-grain structural steels
and cryolitic steels. The mechanical properties are dependent on the working conditions. Optimal results are obtained at
heat input of E < 15 kJ / cm and interpass temperatures must not exceed 150C. The wire is used in combination with
welding flux FB TT.
Base materials:
Art of steel
Finegrained steels :
Cryolitic steels :
DIN :
TStE 255 to TStE 380
EstE 255 to EStE 380
TTSt 35N , TTSt 35V
TTSt 41N , TTSt 41V
TTSt 45N , TTSt 45V
14Ni6 , 10Ni14
16Ni14
W.Nr. :
1.0463 to 1.8910
1.1103 to 1.8911
1.1101 , 1.1101
1.5622 , 1.5637
1.5639
Heat treatment:
Type of wire :
basic
Welding current:
DC + and AC
Si
Mn
Ni
0,04
0,15
0,80
> 0,015
> 0,015
2,50
< 3 ml
Mechanical properties:
Welding flux :
FB TT
Yield strength
ReL / Rp 0.2:
> 370
MPa(N/mm )
Tensile strength
Rm:
480 - 580
MPa(N/mm )
Elongation
A5 :
> 26
Impact energy
KV
KV
KV
KV
KV
> 140
> 120
> 100
> 80
> 47
J ( - 20 C)
J ( - 40 C)
J ( - 60 C)
J ( - 80 C)
J ( -105 C)
:
:
:
:
:
mm
3,2
4,0
Welding parameters
Current
Arc voltage
A
V
350 - 600
400 - 800
26 - 33
27 - 39
Date: 2009-06-10
Packing
Wire coil sizes :
420x280x90
Weight : 22 - 29 kg ;
K 415
Weight : appr. 25 kg
V42
Classification:
EN ISO 26 304-A: S 894FBT3Ni2.5Cr1Mo
AWS-SFA-5.23 : F 12 A 4 - EC - G
d.o.o.
FILTUB 138
FILTUB 138 is basic medium alloy flux-cored wire recommended for submerged arc welding fine-grained and heattreated fine-grained steels. The mechanical properties are dependent on the working conditions. Optimal results are
obtained at a heat input of E < 15 kJ / cm and interpass temperatures must not exceed 150. The wire is used in
combination with welding flux FB TT.
Base materials:
Art of steel
Finegrained steels :
Creep resistant
finegrained steels :
Heat-treated
finegrained steels :
DIN
StE 460 , StE 500
WStE 500 , TStE 460
TStE 500
NAXTRA 56 , NAXTRA 63
HY 80
WB 35 , WB 36
BHW 35 , BHW 38
XABO 620 , XABO 890 , XABO 960
W.Nr. :
1.8905 , 1.8907
1.8937 , 1.8915
1.8917
1.8944 , 1.8954
1.6780
1.5403 , 1.6368
1.8807
1.8914 , 1.8925 , 1.8933
Heat treatment:
Type of wire :
basic
Welding current:
DC + and AC
Si
Mn
Cr
Ni
Mo
0,08
0,35
1,50
0,80
2,50
0,40
< 3 ml
Mechanical properties:
Welding flux :
FB TT
Yield strength
ReL / Rp 0.2:
> 870
MPa(N/mm )
Tensile strength
Rm:
950 - 1100
MPa(N/mm )
Elongation
A5:
> 12
Impact energy
KV :
KV :
KV :
> 60
> 50
> 47
J ( 0 C)
J ( - 20 C)
J ( - 40 C)
mm
3,2
4,0
Welding parameters
Current
Arc voltage
A
V
350 - 600
400 - 800
26 - 33
27 - 39
Date: 2010-06-18
Packing
Wire coil sizes :
420x280x90
Weight : 22 - 29 kg ;
K 415
Weight : appr. 25 kg
V43
Classification:
AWS A-5.2
:E 80 T5 G
d.o.o.
FILTUB 140
FILTUB 140 is basic medium alloy flux-cored wire recommended for submerged arc welding NiCu-alloyed steels
resistant to atmospheric corrosion and fine-grain structural steels such as Corten, Patinax, Acor and similar. This wire is
used in combination with welding flux FB TT.
Base materials:
Art of steel
Weather corroion resistant
steels :
Fine-grain structural
steels :
DIN :
StE 420 , StE 460
ACOR 37-2 , ACOR 37-3 , ACOR 52-3
CORTEN A,B
Patinax 37
WStE 420 , WStE 460
TStE 420 , TStE 460
EStE 420 , EStE 460
W.Nr. :
1.8902 , 1.8905
1.8960 , 1.8961 , 1.8963
1.8962 , 1.8963
1.8960
1.8932 , 1.8935
1.8912 , 1.8915
1.8913 , 1.8918
Heat treatment:
Type of wire :
basic
Welding current:
DC + and AC
Si
Mn
Ni
Cu
0,05
0,20
1,30
1,20
0,50
< 3 ml
Mechanical properties:
Welding flux :
FB TT
Yield strength
MPa(N/mm )
Tensile strength
Rm:
540 - 620
MPa(N/mm )
Elongation
A5:
> 22
Impact energy
KV :
> 120
J ( + 20 C)
mm
3,2
4,0
Welding parameters
Current
Arc voltage
A
V
350 - 600
400 - 800
26 - 33
27 - 39
Date: 2009-06-10
Packing
Wire coil sizes :
420x280x90
Weight : 22 - 29 kg ;
K 415
Weight : appr. 25 kg
V44
Classification:
DIN 8555 : UP1 - GF - BFB1 65 - 350
E3N 14700: T Fe1
d.o.o.
FILTUB DUR 205 is basic medium alloy flux-cored wire recommended for submerged arc hard surfacing highly wear
resistant applications. The deposit is tough, free of cracks and porosity and therefore is highly resistant to deformation
and impact. On the base material with low weldability is recommended depositing a buffer layer with FILTUB 112. The
wire is used in combination with welding flux FB 12.2. Suitable for: steel mill rolls, conveyer belt wheels and rolls, rolls of
caterpillar crane wheel rims, guide rolls, idling wheels dredger buckets cylinder etc.
Base materials:
Steels
Steel castings
Heat treatment:
Type of wire :
basic
Welding current:
DC + and AC
Welding flux :
FB 12.2
Interpass temperature :
< 400 C
Si
Mn
Cr
Mo
3
8
0,15
0,18
0,50
0,50
1,60
1,90
2,8
3,4
0,6
0,7
Mechanical properties:
Hardness :
350 - 380 HB
Welding parameters
Current
Arc voltage
A
V
mm
3,2
4,0
5,0
350 - 600
400 - 800
450 - 850
Date: 2009-06-10
26 - 33
27 - 39
29 - 41
Packing
Wire coil sizes :
420x280x90
Weight : 22 - 29 kg ;
K 415
Weight : appr. 25 kg
V45
Classification:
DIN 8555 : UP5-GF-BFB4 652 40
EN 14700 :T Fe7
d.o.o.
FILTUB DUR 212 is basic medium alloy flux-cored wire recommended for submerged arc hard surfacing highly wear
resistant applications. The deposit is tough, free of cracks and porosity and therefore is highly resistant to deformation
and impact. On the base material with low weldability is recommended depositing a buffer layer with FILTUB 112. The
wire is used in conjunction with welding flux FB 12.2. Suitable for: steel mill rolls, conveyer belt wheels and rolls, rolls of
caterpillar crane wheel rims, guide rolls, idling wheels dredger buckets cylinder etc.
Base materials:
Steels
Steel castings
Heat treatment:
Type of wire :
basic
Welding current:
DC + and AC
Welding flux :
FB 12.2
Interpass temperature :
< 400 C
Si
Mn
Cr
Mo
3
8
0,08
0,08
0,35
0,35
1,40
1,20
5,0
6,0
0,85
1,0
Mechanical properties:
Hardness :
37 - 42 HRC
Welding parameters
Current
Arc voltage
A
V
mm
3,2
4,0
5,0
350 - 600
400 - 800
450 - 850
Date: 2009-06-10
26 - 33
27 - 39
29 - 41
Packing
Wire coil sizes :
420x280x90
Weight : 22 - 29 kg ;
K 415
Weight : appr. 25 kg
V46
Classification:
DIN 8555 : UP6-BFB4 652 50
EV 14700: TZ Fe3
d.o.o.
FILTUB DUR 214 is basic medium alloy flux-cored wire recommended for submerged arc hard surfacing of steel machine
parts subject to friction (metal to metal) and wearing at temperature up to 600C. The weld metal is free of cracking and
porosity and has a high resistance to load and impact conditions. On base material with low weldability is recommended
depositing a buffer layer with FILTUB 112. This wire is used in combination with welding flux FB 12.2. Suitable for: sheet
rolls, shape rolls for hot steel rolling, guillotine knives etc.
Base materials:
Steels
Steel castings
Heat treatment:
Type of wire :
basic
Welding current:
DC + and AC
Welding flux :
FB 12.2
Interpass
temperature :
< 400 C
Si
Mn
Cr
Mo
Co
Ni
2
4
0,35
0,40
0,35
0,35
1,10
1,20
7,0
8,0
4,5
5,0
2,1
2,3
0,6
0,7
1,2
1,3
2,2
2,5
Mechanical properties:
Hardness :
46 - 52 HRC
mm
3,25
4,0
5,0
Welding parameters
Current
Arc voltage
A
V
350 - 600
400 - 800
450 - 850
26 - 33
27 - 39
29 - 41
Date: 2010-06-23
Packing
Wire coil sizes :
420x280x90
Weight : 22 - 29 kg ;
K 415
Weight : appr. 25 kg
V47
Classification:
DIN 8555 : UP6-GF-BFB4 652 55
EN 14700: T Fe8
d.o.o.
FILTUB DUR 215 is basic medium alloy flux-cored wire recommended for submerged arc hard surfacing of parts which
have high resistance to wear and corrosion. The weld metal is free of cracking and porosity and has a high resistance to
load and impact conditions. On base material with low weldability is recommended depositing a buffer layer with FILTUB
112. The wire is used in cmbination with welding flux FB 12.2. Suitable for: roll bodies, components for pumps, water
turbines, valves, rails, baffle and wearing plates etc.
Base materials:
Steels
Steel castings
Heat treatment :
Type of wire :
basic
Si
Mn
Cr
2
4
0,45
0,50
0,40
0,40
1,10
1,20
11,0
12,5
Welding current:
DC + and AC
Welding flux :
Mechanical properties:
Hardness :
FB 12.2
50 - 55 HRC
Interpass temperature :
Machinability :
< 400 C
by grinding
mm
3,2
4,0
5,0
Welding parameters
Current
Arc voltage
A
V
350 - 600
400 - 800
450 - 850
26 - 33
27 - 39
29 - 41
Date: 2009-06-10
Packing
Wire coil sizes :
420x280x90
Weight : 22 - 29 kg ;
K 415
Weight : appr. 25 kg
V48
Classification:
DIN 8555 : UP 5-GF-BFB 165 400
EN 14 700: TZ Fe7
d.o.o.
FILTUB 12Cr2NiMo is basic medium alloyed flux-cored wire recommended for submerged arc hard surfacing of parts
which have high resistance to metal-to-metal wear, corrosion and thermal fatigue. On the base material with low
weldability is recommended depositing a buffer layer with FILTUB 112. The wire is used in combination with welding flux
FB TT. Suitable for: continuous casting rolls, hydraulic plungers, brake drums etc.
Base materials:
Steels
Steel castings
Heat treatment :
Type of wire :
basic
Welding current:
DC + and AC
Welding flux :
FB 12.2
Interpass temperature :
< 400C
Si
Mn
Cr
Ni
Mo
2
4
0,10
0,08
0,40
0,40
1,10
1,20
11,5
12,5
1,8
2,2
0,9
1,1
Mechanical properties:
Hardness :
380 - 420 HB
mm
3,2
4,0
5,0
Welding parameters
Current
Arc voltage
A
V
350 - 600
400 - 800
450 - 850
26 - 33
27 - 39
29 - 41
Date: 2009-06-10
Packing
Wire coil sizes :
420x280x90
Weight : 22 - 29 kg ;
K 415
Weight : appr. 25 kg
V49
Classification:
DIN 8555 : UP5-GF-FB 165 - 40
EN 14 700: TZ Fe7
d.o.o.
FILTUB 13Cr3NiMoV is basic medium alloyed flux-cored wire recommended for submerged arc hard surfacing of parts with
high resistance to metal-to-metal wear, corrosion and thermal fatigue. On the base material with low weldability is
recommended depositing a buffer layer with FILTUB 112. The wire is used in combination with welding flux FB 12.2.
Suitable for: continuous casting rolls, hydraulic plungers, brake drums etc.
Base materials:
Steels
Steel castings
Heat treatment :
Type of wire :
basic
Welding current:
DC + and AC
Welding flux :
FB 12.2
Interpass temperature :
< 350 C
Si
Mn
Cr
Ni
Mo
2
4
0,12
0,10
0,40
0,40
1,10
1,20
12,0
13,0
2,6
3,0
0,9
1,0
0,25
0,25
Mechanical properties:
Hardness :
42 - 44
HRC
mm
3,2
4,0
5,0
Welding parameters
Current
Arc voltage
A
V
350 - 600
400 - 800
450 - 850
26 - 33
27 - 39
29 - 41
Date: 2009-06-10
Packing
Wire coil sizes :
420x280x90
Weight : 22 - 29 kg ;
K 415
Weight : appr. 25 kg
V50
Classification:
DIN 8555 : UP5-GF-BCS 256 - 40
Ev 14 700: TZ Fe7
d.o.o.
FILTUB DUR 17 Cr
FILTUB DUR 17Cr is basic 17Cr-alloy flux-cored wire recommended for submerged arc hard surfacing of parts which
have high resistance to corrosion at high temperatures, wear and thermal fatigue. On base material with low weldability
is recommended depositing a buffer layer with FILTUB 112. The wire is used in combination with welding flux AB Cr.
Suitable for: continuous casting rolls and other rolling equipment, steam turbine parts, valve seats etc.
Base materials:
Steels
Steel castings
Heat treatment :
Type of wire :
basic
Si
Mn
Cr
2
4
0,08
0,06
0,60
0,80
1,10
1,20
16,0
17,5
Welding current:
DC + and AC
Welding flux :
Mechanical properties:
Hardness :
AB Cr
38 - 42 HRC
Interpass temperature :
Machinability :
< 350 C
mm
3,2
4,0
5,0
Welding parameters
Current
Arc voltage
A
V
350 - 600
400 - 800
450 - 850
26 - 33
27 - 39
29 - 41
Date: 2009-06-10
Packing
Wire coil sizes :
420x280x90
Weight : 22 - 29 kg ;
K 415
Weight : appr. 25 kg
V51
Classification:
AWS-SFA-5.22: E 307 T0 1/-4
E 307 T1 1/-4
EN ISO 17633-A: T18 8MnRC/M3
EN ISO 17633-A: T18 8MnPC/ M2
d.o.o.
FILCORD 307 is rutile flux-cored wire suitable for welding austenitic CrNiMn stainless steels, for dissimilar joints,
welding of steels of un-own composition and difficult to weld steels, joining of 14 % Mn austenitic steels and for
buffering. Service temperature from -60C to +300C.
Base materials:
Art of steel
Alloyed corrosion resistant
14% Mn steels,
Austenitic CrNiMn stainless
steels
Difficult to weld steels,
buffering
DIN :
W.Nr. :
Heat treatment:
Type of wire:
rutil
Welding current :
DC +
Welding positions :
Si
Mn
Ni
Cr
<0,10
0,70
6,0
< 0,030
< 0,030
9,0
19,0
Mechanical properties:
Yield strength
Tensile strength
Schielding gas :
( EN 14175 )
ReL / Rp 0.2:
480
MPa (N/mm )
2
MPa (N/mm )
Rm:
630
Elongation
A5:
40
Impact energy
KV :
>50
J ( +20 C)
CO2 ; M 21
consumption 18 - 22 l / min
mm
0,9
1,2
1,6
Welding parameters
Current
Arc voltage Wire feed rate
A
V
m / min
110 - 190
130 - 220
250 - 290
Datum 2012-09-27
23 - 29
22 - 30
27 - 30
Packing
K 300 , D 300
lay to lay
weight :
approx. 15 kg
V52
Classification:
AWS-SFA-5.22: E 308L T0 1/-4
E 308L T1 1/ 4
EN ISO 17633-A: T19 9LR C/M 3
EN ISO 17633-A: T19 9LP C/M 2
EN ISO 17633-B: TS308L-F B0
: TS308L-F B1
d.o.o.
FILCORD 308L is rutile flux-cored wire suitable for welding austenitic 19/9 CrNi stainless steels. Resistant to
intergranular corrosion at operating temperatures up to 350C. It features: stable arc, low spatter, self-detaching slag,
flat notch free weld interface and used in all position welding.
Base materials:
Art of steel
Alloyed corrosion resistant
DIN :
X 5 CrNi 18 10 , X 6 CrNiTi 18 10
X 5 CrNi 18 12 , X 5 CrNiNb 18 9
X 2 CrNi 19 11 , X 6 CrNiNb 18 10
X 2 CrNiN 18 10 , G-X 5 CrNiNb 18 9
W.Nr. :
1.4301 , 1.4541
1.4303 , 1.4543
1.4306 , 1.4550
1.4311 , 1.4552
Heat treatment:
Type of wire :
rutil
Welding current :
Si
Mn
Ni
Cr
< 0,04
0,75
1,5
< 0,030
< 0,005
10,0
19,5
DC +
Welding positions :
Schielding gas :
( EN 14175 )
Mechanical properties:
ReL / Rp 0.2:
> 350
MPa(N/mm )
Tensile strength
Rm:
560 - 620
MPa(N/mm )
Elongation
A5:
> 35
Impact energy
KV :
KV :
> 60
> 50
J ( +20 C)
J ( -20 C)
CO2 ; M 21
consumption 18 - 22 l / min
Yield strength
mm
0,9
1,2
1,6
Welding parameters
Current
Arc voltage Wire feed rate
A
V
m / min
110 - 190
130 - 220
250 - 290
Datum 2012-09-27
23 - 29
22 - 30
27 - 30
Packing
K 300 , D 300
lay to lay
weight :
approx. 15 kg
V53
Classification:
AWS-SFA-5.22: E 309L T0 1/-4
E 309L T1 1/-4
EN ISO 17633-A: T23 12 LR C/M3
EN ISO 17633-A: T23 12 LP C/M2
EN ISO 17633-B: TS309L-F B0
: TS309L-F B1
d.o.o.
FILCORD 309L is rutile flux-cored wire suitable for MAG welding dissimilar stainless steels and for joining high alloyed
CrNiMo steels with unalloyed steels. Suited for service temperatures from - 60C to 300C. It features: stable arc,
low spatter, self-detaching slag, flat notch free weld interface and used in all position welding.
Base materials:
Art of steel
Heat resisting steels
DIN :
X 10 CrAl 7 , X 10 CrAl 13
X 10 CrAl 18 ,
G-X 40 CrNiSi 22 9 , X 15 CrNiSi 20 12
G-X 25 CrNiSi 20 14 , G-X 40 CrNiSi 25 12
W.Nr. :
1.4713 , 1.4724
1.4742
1.4826 , 1.4828
1.4832 , 1.4837
Heat treatment:
Type of wire:
rutil
Welding current :
Si
Mn
Ni
Cr
< 0,05
0,75
1,5
< 0,030
< 0,008
12,5
22,5
DC +
Welding positions :
Mechanical properties:
Yield strength
Tensile strength
Schielding gas :
ReL / Rp 0.2:
Rm:
> 360
MPa(N/mm )
2
560 - 620
MPa(N/mm )
Elongation
A5:
> 30
Impact energy
KV :
KV :
> 60
> 50
J ( +20 C)
J ( -20 C)
( EN 14175 )
CO2 ; M 21
consumption 18 - 22 l / min
mm
0,9
1,2
1,6
Welding parameters
Current
Arc voltage Wire feed rate
A
V
m / min
110 - 190
130 - 220
250 - 290
Datum :2012-09-27
23 - 29
23 - 29
27 - 30
Packing
K 300 , D 300
lay to lay
weight :
approx. 15 kg
V54
Classification:
AWS-SFA-5.22:
E 316L T0 1/-4
E 316L T1 1/-4
EN ISO 17633-A: T19 12 3LR C/M3
EN ISO 17633-A: T19 12 3LP C/M2
EN ISO 17633-B: TS316L-F B0
: TS316L-F B1
d.o.o.
FILCORD 316L is rutile flux-cored wire suitable for welding un-stabilised and stabilised 19/12/3 stainless steels. It is
resistant to intergranular corrosion at operating temperatures up to 400C. It features: stable arc, low spatter, selfdetaching slag, flat notch free weld interface and used in all position welding.
Base materials:
Art of steel
Alloyed corrosion resistant
DIN :
X 5 CrNiMo 17 12 2 , X 6 CrNiMoTi 17 12 2
X 2 CrNiMo 17 13 2 , X 10 CrNiMoTi 18 12
X 2 CrNiMoN 17 12 2 , X 10 CrNiMoNb 18 10
X 2 CrNiMo 18 14 3 , G-X 5 CrNiMoNb 18 10
X 5 CrNiMo 17 13 3 , X 10 CrNiMoNb 18 12
W.Nr. :
1.4401 , 1.4571
1.4404 , 1.4573
1.4406 , 1.4580
1.4435 , 1.4581
1.4436 , 1.4583
Heat treatment:
Type of wire :
rutil
Welding current :
Si
Mn
Ni
Cr
Mo
< 0,04
0,80
1,3
< 0,030
< 0,005
12,0
19,0
2,5
DC +
Welding positions :
Shielding gas :
( EN 14175 )
Mechanical properties:
2
Yield strength
ReL / Rp 0.2:
> 380
MPa(N/mm )
Tensile strength
Rm:
580 - 640
MPa(N/mm )
Elongation
A5:
> 32
Impact energy
KV :
KV :
> 60
> 55
J ( +20 C)
J ( -20 C)
CO2 ; M 21
Consumption 18 - 22 l / min
mm
0,9
1,2
1,6
Welding parameters
Current
Arc voltage Wire feed rate
A
V
m / min
110 - 190
130 - 220
250 - 290
Datum :2012-09-27
23 - 29
23 - 29
27 - 30
Packing
K 300 , D 300
lay to lay
weight :
approx. 15 kg
V55
Notes:
KEY TO SYMBOLS
d.o.o.
W.Nr.
Werkstoffnummer
Welding positions
s
h
q f q
w
overhead
s vertical-up
q horizontal-vertical
h horizontal
f vertical-down
w downhand
Type of current
AC
DC +
DC -
alternating current
direct current (electrode positive)
direct current (electrode negative)
Hardness
HB
HRC
Brinell hardness
Rockwell C hardness
d.o.o.
GUIDE TO APPROVALS
DB
GL
Germanischer Lloyd
LR
ABS
BV
Bureau Veritas
DNV
RINA
RS
PRS
SZU
CR
Slovenian Railways
Lettering code:
Y
H or H 15
A
T
M
TM
d.o.o.
Welding electrodes
CELEX
CELEX Mn
RUTILEN 12
RUTILEN 13
RUTILEN Z
RUTILEN 1000 S
RUTILEN X
RUTILEN 2000 S
RUTILEN E
EMONA
SAVA 150
SAVA 150 AR
SAVA 200
EVB 50
EVB 55
EVB S
EVB EXTRA
EVB 60
EVB 62
EVB 75
EVB Ni
EVB 2.5 Ni
EVB Mo
EVB CrMo
EVB 2CrMo
EVB CrMoV
INOX R 19/9 NC
INOX R 19/9 Nb
INOX R 19/12/3 NC
INOX R 22/12/3 Fe
INOX R 25/14/3 NC
INOX R 18/8/6 Fe
Welding electrodes
RUTILEN 12
RUTILEN 13
EMONA
SAVA 150 AR
EVB 50
EVB S
EVB 60
EVB 75
EVB Ni
INOX R 19/9 NC
INOX R 19/9 Nb
INOX R 19/12/3 NC
INOX R 22/12/3 Fe
INOX R 29/9
INOX R 25/14/3 NC
INOX B 18/8/6
E DUR 250
E DUR 300
E DUR 400
ABS
BV
GL
LR
DNV
1
2
1
2
1
2
1
2
3Y
3Y
3Y
3Y
4YHH
4YHH
4YH10
3/3YH
3 (to NV E36)
2Y
4YH10
3Y40
4Y62
3Y40HH
3Y40H15
3/3YH
3YH10
6Y50H10
316 L-17
309 Mo-16
UP
UP
308L
347
316L-17
309Mo-16
309
UP
CR
1
2
3
RS
S/UIC
*
*
*
3YHH
3YHH
*
*
*
3Y40
5Y69
5Y46
*
*
5Y69
5Y46
308L
3Y40H15
4Y62
5Y69
5Y46
RINA
3Y
4 Y HH
PRS
TV
*
*
*
*
*
*
*
*
*
*
*
*
DB
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
SZU
*
*
*
3H10,4YH10
3H10,3Y40H10
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
d.o.o.
Welding fluxes
FILTUB 4 R / C 1
FILTUB 4 R / M 21
FILTUB 12 M
FILTUN 12 B
FILCORD 308 L
FILCORD 316 L
FILCORD 309 L
Welding fluxes
AB 100
/ EPP2
/ EPP3
AR 18.1 / EPP 2
AR D1
/ EPP 2
FB TT
/ EPP 2
/ EPP 3
/ EPP 2 Mo
AB 123 / EPP2
/ EPP 3
/ EPP2 Mo
FB 12.2 / EPP 2
/ EPP3
FB 33
/ EPP 19/9 NC
Welding fluxes
AB 100
/ EPP2
/ EPP3
AR 18.1 / EPP 2
AR D1
/ EPP 2
FB TT
/ EPP 2
/ EPP 3
/ EPP 2 Mo
/ EPP3
ABS
BV
GL
LR
DNV
3YSA
SA3YM
3YS
3S/3YS
IIIYMS
3YS
3S/3YS
4Y69S
*
UP
CR
3YMS
3
RS
GIII
S
*
*
3/3Y
IIIYMS
RINA
PRS
3S/3YS
W50 2 W2Mo
ABS
BV
GL
LR
DNV
3YSA
SASYM
3YS
3S / 3YS
IIIYMS
ABS
2TM
2YTM
2YTM
2YTM
3M
3YM
3YM
BV
A2YTM
A2YTM
A2YTM
A1,1YTM
A3M
A3YM
A3YM
GL
2TM
2YTM
2YTM
1YTM
3M
3YM
3YM
LR
2TM
2M/2YM
2TM/2YTM
1YTM
3M
3M/3YM
DNV
IITM
IIYTM
IIYTM
IIYTM
IIIM
IIIYM
IIIYM
2YT,3YM
A3YM
3YM
3M/3YM/3YT
IIYT(IIIYM)
S/UIC
*
*
*
*
*
*
*
*
TV
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
TV
*
*
*
*
*
*
*
TV
*(S2)
*
*(S3)
*(S2Mo)
*
*
*
*(S2)
DB
*
*
*
*
*
*
*
*
*
CR
3YS
CR
2TM
2YTM
2YTM
1YTM
3M
3YM
3YM
3M
DB
*
*
*
Elongation
min.%
Symbol
Welding position
35
440-570
355
22
All positions
38
470-600
380
20
42
500-640
420
20
46
530-680
460
20
50
560-720
500
18
46
Symbol
1
2
3
4
5
6
7
8
Metal recovery %
< 105
< 105
> 105 125
> 105 125
> 125 160
> 125 160
> 160
> 160
1 Ni
Covered electrode
for manual metal-arc
welding
Symbol
Z
A
0
2
3
4
5
6
Yield Strength
2
min.N/mm
Impact Energy
Charpy-V
Temp.C for 47Jmin.
No requirements
+ 20
0
- 20
- 30
- 40
- 50
- 60
Type of current
AC + DC
DC
AC + DC
DC
AC + DC
DC
AC + DC
DC
Symbol
Coating type
Symbol
A
B
C
R
RR
RC
RA
RB
Acid
Basic
Cellulosic
Rutile
Rutile (thick coated)
Rutile-Cellulosic
Rutile-Acid
Rutile-Basic
H5
H10
H15
Symbol
H5
Hydrogen content
ml/100 g
deposited metal, max.
5
10
15
Chemical composition *
Mn
Mo
Ni
No symbol
2.0
Mo
1.4
0.3 0.6
MnMo
> 1.4 2.0
0.3 0.6
1Ni
1.4
0.6 1.2
2Ni
1.4
1.8 2.6
3Ni
1.4
> 2.6 3.8
Mn1Ni
> 1.4 2.0
0.6 1.2
1NiMo
1.4
0.3 0.6
0.6 1.2
Z
Any other agreed composition
* If not specified Mo<0.2, Ni<0.3, Cr<0.2, V<0.05, Nb<0.05, Cu<0.3.
Single values shown in the table mean maximum values.
d.o.o.
Minimum
Minimum
Minimum 1)
proof strength
tensile strength
Elongation
Post weld heat
Rp0,2
Rm
A
treatment
2
2
N/mm
N/mm
%
2)
13
250
450
15
3)
13 4
500
750
15
4)
17
300
450
15
19 9
350
550
30
19 9 L
320
510
30
19 9 Nb
350
550
25
19 12 2
350
550
25
None
19 12 3 L
320
510
25
19 12 3 Nb
350
550
25
19 13 4 N L
350
550
25
22 9 3 N L
450
550
20
25 7 2 N L
500
700
15
None
25 9 3 Cu N L
550
620
18
25 9 4 N L
550
620
18
18 15 3 L
300
480
25
18 16 5 N L
300
480
25
20 25 5 Cu N L
320
510
25
None
20 16 3 Mn N L
320
510
25
25 22 2 N L
320
510
25
27 31 4 Cu L
240
500
25
18 8 Mn
350
500
25
18 9 Mn Mo
350
500
25
20 10 3
400
620
20
23 12 L
320
510
25
None
23 12 Nb
350
550
25
23 12 2 L
350
550
25
29 9
450
650
15
16 8 2
320
510
25
19 9 H
350
550
30
25 4
400
600
15
22 12
350
550
25
None
25 20
350
550
20
25 20 H
350
550
10 5)
36 18
350
550
10 5)
1) Gauge length is equal to five times the test specimen diameter.
2) 840C to 870C for 2 h Furnace cooling down to 600C then air cooling.
3) 580C to 620C tor 2 h Air cooling.
4) 760C to 790C for 2 h, furnace cooling down to 600C then air cooling.
5) These electrodes have high carbon in the all-weld metal for service at high temperatures. Room
temperature elongation has little relevance to such applications.
NOTE: All-weld metal can have elongation and toughness lower than those of the parent metal.
Alloy symbol
E
Covered electrode
for manual metal-arc
welding
Symbol
R
B
Coating
type
Rutile
Basic
19 12 2
Type of
electrode covering
Symbol
1
2
3
4
5
6
7
8
Symbol for
weld metal recovery
and type of current
Type of
current 1) 2)
a.c. and d.c.
d.c.
a.c. and d.c.
d.c.
a.c. and d.c.
d.c.
a.c. and d.c.
d.c.
Symbol for
welding position
Symbol
1
2
3
4
5
Welding position
All positions
All positions, except vertical down
Flat butt weld, flat fillet weld, horizontal
vertical fillet weld
Flat butt weld, flat fillet weld
Vertical down and positions according
to symbol 3
d.o.o.
Yield Strength
2
min.N/mm
Elongation
min.%
355
380
22
22
430-550
510-610
Covered electrode
for manual metal-arc
welding
First
digit
0
1
2
3
4
5
51
32
Symbol
A2
R2
R3
R(C)3
C4
RR5
RR(C)5
RR6
RR(C)6
A7
AR7
RR(B)7
RR8
RR(B)8
B9
B(R)9
B10
B(R)10
RR11
AR11
B12
B(R)12
Symbol
1
2
3
4
Impact Energy
Temp. C
for 28 J min.
Not specified
+20
0
-20
-30
-40
Second
digit
Impact Energy
Temp. C
for 47 J min.
Not specified
+20
0
-20
-30
-40
0
1
2
3
4
5
RR11
Welding
position
1
1
2(1)
1
1
2
1
2
1
2
2
2
2
2
1
1
2
2
4(3)
4(3)
4(3)
4(3)
Current
Type
5
5
2
2
0+(6)
2
2
2
2
5
5
5
2
5
0+(6)
6
0+(6)
6
5
5
0+(6)
0+(6)
Welding positions
All positions
All positions except vertical-down
Flat butt and fillet, horizontal-vertical fillet
Flat butt and fillet
190
Coating
Type
Thickness
Acid
Rutile
Rutile
Rutile-cellulosic
Cellulosic
Rutile
Rutile-cellulosic
Rutile
Rutile-cellulosic
Acid
Acid-rutile
Basic-rutile
Rutile
Basic-rutile
Basic
Basic + others
Basic
Basic + others
Rutile
Acid + rutile
Basic
Basic + others
Elektrode
polaritiy
+/+
Thin
Thin
Medium
Medium
Medium
Thick
Thick
Thick
Thick
Thick
Thick
Thick
Thick
Thick
Thick
Thick
Thick
Thick
Thick 105% recovery
Thick 105% recovery
Thick 120% recovery
Thick 120% recovery
80
7
8
9
d.o.o.
Covered electrode
for manuel-arc
welding
70
18
70
16
-1
AWS
Classification
Tensile Strength
min.
ksi
N/mm2
HZ
Elongation
min.%
Impact Enery
Charpy-V
J/C
Welding
Position
Type of coating
Type of Current
ksi
N/mm
E 6010
E 6011
E 6012
E 6013
E 6019
E 6020
E 6022
E 6027
60
60
60
60
60
60
60
60
414
414
414
414
414
414
414
414
48
48
48
48
48
48
Not spec.
48
331
331
331
331
331
331
Not spec.
331
22
22
17
17
22
22
Not spec.
22
27 / -29
27 / -29
Not spec.
Not spec.
27 / -18
Not spec.
Not spec.
27 / -29
1
1
1
1
1
2
2
2
Cellulosic
Cellulosic
Rutile
Rutile
Rutile/Acid
Acid
Acid
Acid,high recovery
x
x
x
x
x
x
x
+ pol
+ pol
- pol
+/- pol
+/- pol
c) +/- pol
- pol
c) +/- pol
E 7014
E 7015
E 7016
E 7016-1
E 7018
E 7018-1
E 7018 M
E 7024
E 7027
E 7028
E 7048
70
70
70
70
70
70
a)
70
70
70
70
482
482
482
482
482
482
482
482
482
482
482
58
58
58
58
58
58
b)
58
58
58
58
399
399
399
399
399
399
b)
399
399
399
399
17
22
22
22
22
22
24
17
22
22
22
Not spec.
27 / -29
27 / -29
27 / -46
27 / -29
27 / -46
67 / -29
Not spec.
27 / -29
27 / -29
27 / -29
1
1
1
1
1
1
1
2
2
2
4
Rutile,iron powder
Basic
Basic
Basic
Basic,iron powder
Basic,iron powder
Basic,iron powder
Rutile, high recovery
Acid,high recovery
Basic,high recovery
Basic,iron powder
x
x
x
x
x
x
x
x
x
+/- pol
+ pol
+ pol
+ pol
+ pol
+ pol
+ pol
+/- pol
c) +/- pol
+ pol
+ pol
a)
b)
c)
AC
DC
Code
1
2
4
Welding position
All positions except vertical-down
Flat and H-V fillets
All positions but in the vertical, V-down only
Flux type
Symbol
Metalurgical
behaviour
Symbol
fused
MS
Manganese-Silicate
Contribution from
flux on all-weld
metal (%)
over 0.7%
agglomerated
CS
Calcium-Silicate
Burn - out
0.5 - 0.7%
mixed
CG
Calcium-Magnesium Oxide
0.3 - 0.5%
CB
0.1 - 0.3%
ZS
Calcium-Magnesium basic
Oxide
Calcium-Magnesium Oxide
with Iron
Calcium-Magnesium Oxide
with Iron
Zirconium-Silicate
RS
Rutile-Silicate
0.5 - 0.7%
AR
Aluminate-Rutile
over 0.7%
CI
IB
Burn-out/Pickup
Pick-up
0.3 - 0.5%
Aluminate-Basic
0.1 - 0.3%
Aluminate-Silicate
0.3 - 0.5%
AF
Aluminate-Fluoride-basic
0.5 - 0.7%
FB
Fluoride-basic
over 0.7%
67
AC
Type of current
Symbol
1
Symbol
AC
0.1 - 0.3%
AS
0 0.1%
AB
CS
Pick-up
Metalurgical behaviour
-for welding and surfacing of unalloyed and
lowalloyed steels (general structural, high tensile,
some heat-resistant steels); there arent any
alloying elements added, except Si and Mn
- for welding and surfacing of Cr- in Cr-Ni stainless
steel, heat-resistant steels and Ni and Ni-alloy
- mainly for surfacing, (burn-out and pick-up of
added elements according to table)
DC
Current
Alternating
Direct
H10
Hydrogen content
(ISO3690)
Symbol
ml/ 100 g
H2
2
H4
H5
H 10
10
d.o.o.
Composition in volume %
Symbol
Oxidizing
CO2
Rest
2
Rest
1
2
3
1
2
3
4
0
1
2
3
4
5
6
7
100
M3
C
N
O
Z
1
2
3
4
5
1
2
1
2
3
4
5
1
Reducing
He
1
2
M2
Ar
M1
Inert
O2
0,5 5
0,5 5
0,5 5
5 15
15 25
0,5 5
5 15
5 15
15 25
15 25
25 50
25 50
5 25
25 50
100
0,5 3
0,5 3
3 10
3 10
0,5 3
3 10
0,5 3
3 10
10 15
2 10
10 15
10 15
Ostalo2
Rest
2
Rest
2
Rest
2
Rest
2
Rest
2
Rest
2
Rest
2
Rest
2
Rest
2
Rest
2
Rest
2
Rest
2
Rest
2
Rest
2
Rest
2
Rest
2
Rest
2
Rest
2
Rest
Application
H2
N2
TIG-welding,
plasma-welding and
cutting,
for root passes
MIG, TIG, plasmawelding, for root
passes
0,5 5
Reducing
Inert
Less
oksidizing
MAG
More
oksidizing
Rest
2
Rest
2
Rest
2
Rest
Unreactive
0 15
15 50
100
0,5 95
Note
0,5 10
0,5 50
100
0,5 5
5 50
0,5 5
Rest
Plasma-cutting, for
root passes
Unreaktiv.
Reducing
100
Gas mixture containing components not listed, or mixtures outside the composition ranges listed 1
) For the purpose of the classification, argon may be substituted partially or completely by helium.
) Two gas mixtures with the same Z-classification may not be interchangeable.
d.o.o.
EXAMPLE:
ISO 2560 B E 55 18-N2 A U H5
ISO 2560-B:
E:
55:
18:
-N2:
A:
U:
H5:
Table 1B
Symbol
43
49
55
57
Table 7
Symbol
H5
H10
H15
Hydrogen content
max.
ml/100g of deposited weld metal
5
10
15
d.o.o.
Table 3B
Alloy
symbol
No
symbol, -1
ali P1
-1M3
Chemical composition
Principal alloy
Nominal
element(s)
level
mas. %
Table 4B
Symbol
Type of
covering
Welding
a
positions
b
Type of
current
Mn
03
rutile basic
all
AC in DC()
0,5
1,5
0,4
1,5
0,5
0,5
10
cellulosic
all
DC(+)
11
cellulosic
all
AC in DC(+)
-N1
Mo
Mn
Mo
Mn
Mo
Ni
-N2
Ni
14
-N3
Ni
Mn
Ni
1,5
1,5
1,5
Ni
2,5
18
-3M2
-3M3
-3N3
-N5
-N7
-N13
-N2M3
-NC
-CC
-NCC
-NCC1
-NCC2
-G
Ni
3,5
Ni
6,5
Ni
1
Mo
0,5
Ni
0,5
Cu
0,4
Cr
0,5
Cu
0,4
Ni
0,2
Cr
0,6
Cu
0,5
Ni
0,6
Cr
0,6
Cu
0,5
Ni
0,3
Cr
0,2
Cu
0,5
Any other agreed composition
AC in DC(-)
AC in DC()
AC in DC()
12
rutile
all
13
all
all
15
rutile
rutile + iron
powder
basic
16
basic
all
19
20
24
27
28
basic + iron
powder
Ilmenit
iron oxide
rutile + iron
powder
iron oxide +
iron powder
basic + iron
powder
40
not specified
48
basic
DC (+)
AC in DC(+)
AC in DC(+)
AC in DC()
all
all
all
PA, PB
AC in DC(-)
PA, PB
AC in DC()
PA, PB
AC in DC(-)
PA,PB,PC
AC in DC(+)
Manufacturers
recommendations
all
AC in DC(+)
d.o.o.
EXAMPLE:
ISO 3580A E CrMo1 B4 4 H5
ISO 3580-A:
E:
CrMo1:
B:
4:
4:
H5:
rutile covering
basic covering
Table 4A
Symbol
1
2
3
4
Nominal electrode
efficiency
%
u 105
u 105
> 105 and u 125
> 105 and u 125
Type of current
a, b
AC and DC
DC
AC and DC
DC
Table 5
Symbol
Table 6
Positions
PA, PB
PA, PB, PG
Symbol
H5
H10
H15
Hydrogen content
max.
ml/100g of deposited weld
metal
5
10
15
d.o.o.
Chemical composition, % b, c
Chemical
composition
ISO 3580-Ad
Tensile
strength and
chemical
composition
ISO 3580-Be
Si
Mn
Cr
Mo
Other
elements
Mo
(1M3)
0,10
0,80
0,40 to
1,50
0,030
0,025
0,2
0,40 to
0,70
0,03
0,12
0,80
1,00
0,030
0,030
0,40 to
0,65
0,03 to
0,12
0,80
0,40 to
1,50
0,030
0,025
0,30 to
0,60
0,80 to
1,20
0,25 to
0,60
(CM)
0,05 to
0,12
0,80
0,40 to
1,50
0,030
0,025
0,40 to
0,65
0,40 to
0,65
CM
0,05 to
0,12
0,80
0,90
0,030
0,030
0,40 to
0,65
0,40 to
0,65
C1M
0,07 to
0,15
0,30 to
0,60
0,40 to
0,70
0,030
0,030
0,40 to
0,60
1,00 to
1,25
0,05
(1CM)
0,05 to
0,12
0,80
0,40 to
1,50
0,030
0,025
0,90 to
1,40
0,45 to
0,70
(CrMo1)
1CM
0,05 to
0,12
0,80
0,90
0,030
0,030
1,00 to
1,50
0,40 to
0,65
CrMo1L
(1CML)
0,05
0,80
0,40 to
1,50
0,030
0,025
0,90 to
1,40
0,45 to
0,70
(CrMo1L)
1CML
0,05
1,00
0,90
0,030
0,030
1,00 to
1,50
0,40 to
0,65
0,05 to
0,15
0,80
0,70 to
1,50
0,030
0,025
0,90 to
1,30
0,90 to
1,30
0,10 to
0,35
(Mo)
1M3
MoV
CrMo0,5
(CrMo0,5)
CrMo1
CrMoV1
CrMo2
(2C1M)
0,05 to
0,12
0,80
0,40 to
1,30
0,030
0,025
2,0 to 2,6
0,90 to
1,30
(CrMo2)
2C1M
0,05 to
0,12
1,00
0,90
0,030
0,030
2,00 to
2,50
0,90 to
1,20
0,030
0,025
2,0 to 2,6
0,90 to
1,30
CrMo2L
(2C1ML)
0,05
0,80
0,40 to
1,30
(CrMo2L)
2C1ML
0,05
1,00
0,90
0,030
0,030
2,00 to
2,50
0,90 to
1,20
2CML
0,05
1,00
0,90
0,030
0,030
1,75 to
2,25
0,40 to
0,65
2C1MV
0,05 to
0,15
0,60
0,40 to
1,50
0,030
0,030
2,00 to
2,60
0,90 to
1,20
0,20 to
0,40
Nb 0,010 to
0,050
3C1MV
0,05 to
0,15
0,60
0,40 to
1,50
0,030
0,030
2,60 to
3,40
0,90 to
1,20
0,20 to
0,40
Nb 0,010 to
0,050
(5CM)
0,03 to
0,12
0,80
0,40 to
1,50
0,025
0,025
4,0 to 6,0
0,40 to
0,70
5CM
0,05 to
0,10
0,90
1,00
0,030
0,030
4,0 to 6,0
0,45 to
0,65
Ni 0,40e
5CML
0,05
0,90
1,00
0,030
0,030
4,0 to 6,0
0,45 to
0,65
Ni 0,40e
CrMo5
(CrMo5)
d.o.o.
Chemical composition
symbola for classification
according to
Chemical composition, % b, c
Chemical
composition
ISO 3580-Ad
Tensile
strength and
chemical
composition
ISO 3580-Be
Si
Mn
Cr
Mo
Other
elements
CrMo9
(9C1M)
0,03 to
0,12
0,60
0,40 to
1,30
0,025
0,025
8,0 to
10,0
0,90 to
1,20
0,15
Ni 1,0
(CrMo9)
9C1M
0,05 to
0,10
0,90
1,00
0,030
0,030
8,0 to
10,5
0,85 to
1,20
Ni 0,40e
9C1ML
0,05
0,90
1,00
0,030
0,030
8,0 to
10,5
0,85 to
1,20
Ni 0,40e
(9C1MV)
0,06 to
0,12
0,60
0,40 to
1,50
0,025
0,025
8,0 to
10,5
0,80 to
1,20
0,15 to
0,30
Ni 0,40 to 1,00
Nb 0,03 to 0,10
N 0,02 to 0,07
(CrMo91)
9C1MV
0,08 to
0,13
0,30
1,25
0,01
0,01
8,0 to
10,5
0,85 to
1,20
0,15 to
0,30
Ni 1,0
Cu 0,25
Al 0,04
Nb 0,02 to 0,10
N 0,02 to 0,07
(CrMo91)
9C1MV1
0,03 to
0,12
0,60
1,00 to
1,80
0,025
0,025
8,0 to
10,5
0,80 to
1,20
0,15 to
0,30
Ni 1,0
Cu 0,25
Al 0,04
Nb 0,02 to 0,10
N 0,02 to 0,07
0,15 to
0,22
0,80
0,40 to
1,30
0,025
0,025
10,0 to
12,0
0,80 to
1,20
0,20 to
0,40
Ni 0,8
W 0,40 to 0,60
CrMo91
CrMoWV12
Z
A designation in parentheses [e.g., (CrMo1) or (1CM)] indicates a near match in the other designation system, but not an exact
match. The correct designation for a given composition range is the one without parentheses. A given product may, by having a more
restricted chemical composition which fulfils both sets of designation requirements, be assigned both designations independently,
provided that the mechanical property requirements of Table 2 are also satisfied.
b
The results shall be rounded to the same number of significant figures as in the specified value using the rule A in accordance with
Annex B of ISO 31-0:1992.
d
e
Elements listed without specified values shall be reported, if intentionally added. The total of these unspecified elements and all
other elements found in the course of routine chemical analysis shall not exceed 0,50 %.
EN ISO 3580 B
d.o.o.
EXAMPLE:
ISO 3580B E5518-1CM H5
E:
55:
18:
1CM:
H5:
ISO 3580-B:
10
c
11
c
13
15
16
18
c
19
20
27
a
Type of
covering
cellulosic
cellulosic
rutile
Welding
a
positions
all
all
d
all
basic
basic
basic + metal
powder
Ilmenit
all
d
all
all except
PG
d
all
iron oxide
iron oxide +
iron powder
PA, PB
AC and DC(-)
PA, PB
AC and DC(-)
Type of
b
current
DC(+)
Table 6
Symbol
AC DC(+)
AC and DC()
DC (+)
AC and DC(+)
AC and DC(+)
AC and DC()
H5
H10
H15
Hydrogen content
max.
ml/100g of deposited weld
metal
5
10
15
d.o.o.
EN ISO 3580 B
Chemical composition, % b, c
Chemical
composition
ISO 3580-Ad
Tensile
strength and
chemical
composition
ISO 3580-Be
Si
Mn
Cr
Mo
Other
elements
Mo
(1M3)
0,10
0,80
0,40 to
1,50
0,030
0,025
0,2
0,40 to
0,70
0,03
0,12
0,80
1,00
0,030
0,030
0,40 to
0,65
0,03 to
0,12
0,80
0,40 to
1,50
0,030
0,025
0,30 to
0,60
0,80 to
1,20
0,25 to
0,60
(CM)
0,05 to
0,12
0,80
0,40 to
1,50
0,030
0,025
0,40 to
0,65
0,40 to
0,65
CM
0,05 to
0,12
0,80
0,90
0,030
0,030
0,40 to
0,65
0,40 to
0,65
C1M
0,07 to
0,15
0,30 to
0,60
0,40 to
0,70
0,030
0,030
0,40 to
0,60
1,00 to
1,25
0,05
(1CM)
0,05 to
0,12
0,80
0,40 to
1,50
0,030
0,025
0,90 to
1,40
0,45 to
0,70
(CrMo1)
1CM
0,05 to
0,12
0,80
0,90
0,030
0,030
1,00 to
1,50
0,40 to
0,65
CrMo1L
(1CML)
0,05
0,80
0,40 to
1,50
0,030
0,025
0,90 to
1,40
0,45 to
0,70
(CrMo1L)
1CML
0,05
1,00
0,90
0,030
0,030
1,00 to
1,50
0,40 to
0,65
0,05 to
0,15
0,80
0,70 to
1,50
0,030
0,025
0,90 to
1,30
0,90 to
1,30
0,10 to
0,35
(Mo)
1M3
MoV
CrMo0,5
(CrMo0,5)
CrMo1
CrMoV1
CrMo2
(2C1M)
0,05 to
0,12
0,80
0,40 to
1,30
0,030
0,025
2,0 to 2,6
0,90 to
1,30
(CrMo2)
2C1M
0,05 to
0,12
1,00
0,90
0,030
0,030
2,00 to
2,50
0,90 to
1,20
0,030
0,025
2,0 to 2,6
0,90 to
1,30
CrMo2L
(2C1ML)
0,05
0,80
0,40 to
1,30
(CrMo2L)
2C1ML
0,05
1,00
0,90
0,030
0,030
2,00 to
2,50
0,90 to
1,20
2CML
0,05
1,00
0,90
0,030
0,030
1,75 to
2,25
0,40 to
0,65
2C1MV
0,05 to
0,15
0,60
0,40 to
1,50
0,030
0,030
2,00 to
2,60
0,90 to
1,20
0,20 to
0,40
Nb 0,010 to
0,050
3C1MV
0,05 to
0,15
0,60
0,40 to
1,50
0,030
0,030
2,60 to
3,40
0,90 to
1,20
0,20 to
0,40
Nb 0,010 to
0,050
(5CM)
0,03 to
0,12
0,80
0,40 to
1,50
0,025
0,025
4,0 to 6,0
0,40 to
0,70
5CM
0,05 to
0,10
0,90
1,00
0,030
0,030
4,0 to 6,0
0,45 to
0,65
Ni 0,40e
5CML
0,05
0,90
1,00
0,030
0,030
4,0 to 6,0
0,45 to
0,65
Ni 0,40e
CrMo5
(CrMo5)
EN ISO 3580 B
d.o.o.
Table 1 (continued)
Chemical composition
symbola for classification
according to
Chemical composition, % b, c
Chemical
composition
ISO 3580-Ad
Tensile
strength and
chemical
composition
ISO 3580-Be
Si
Mn
Cr
Mo
Other
elements
CrMo9
(9C1M)
0,03 to
0,12
0,60
0,40 to
1,30
0,025
0,025
8,0 to
10,0
0,90 to
1,20
0,15
Ni 1,0
9C1M
0,05 to
0,10
0,90
1,00
0,030
0,030
8,0 to
10,5
0,85 to
1,20
Ni 0,40e
9C1ML
0,05
0,90
1,00
0,030
0,030
8,0 to
10,5
0,85 to
1,20
Ni 0,40e
(9C1MV)
0,06 to
0,12
0,60
0,40 to
1,50
0,025
0,025
8,0 to
10,5
0,80 to
1,20
0,15 to
0,30
Ni 0,40 to 1,00
Nb 0,03 to 0,10
N 0,02 to 0,07
(CrMo91)
9C1MV
0,08 to
0,13
0,30
1,25
0,01
0,01
8,0 to
10,5
0,85 to
1,20
0,15 to
0,30
Ni 1,0
Cu 0,25
Al 0,04
Nb 0,02 to 0,10
N 0,02 to 0,07
(CrMo91)
9C1MV1
0,03 to
0,12
0,60
1,00 to
1,80
0,025
0,025
8,0 to
10,5
0,80 to
1,20
0,15 to
0,30
Ni 1,0
Cu 0,25
Al 0,04
Nb 0,02 to 0,10
N 0,02 to 0,07
0,15 to
0,22
0,80
0,40 to
1,30
0,025
0,025
10,0 to
12,0
0,80 to
1,20
0,20 to
0,40
Ni 0,8
W 0,40 to 0,60
(CrMo9)
CrMo91
CrMoWV12
Z
A designation in parentheses [e.g., (CrMo1) or (1CM)] indicates a near match in the other designation system, but not an exact
match. The correct designation for a given composition range is the one without parentheses. A given product may, by having a more
restricted chemical composition which fulfils both sets of designation requirements, be assigned both designations independently,
provided that the mechanical property requirements of Table 2 are also satisfied.
b
The results shall be rounded to the same number of significant figures as in the specified value using the rule A in accordance with
Annex B of ISO 31-0:1992.
d
e
Elements listed without specified values shall be reported, if intentionally added. The total of these unspecified elements and all
other elements found in the course of routine chemical analysis shall not exceed 0,50 %.
EN ISO 3580 B
d.o.o.
Tensile
strength and
chemical
composition
ISO 3580-Bb
Minimum
yield
strength c
MPa
Minimum
tensile
strength
MPa
Minimum d
elongation
Impact energy
J at + 20 C
Minimum
average
from three
test
specimens
Minimum
single
valuee
Preheat and
interpass
temperature
C
Time
min
Mo
(1M3)
355
510
22
47
38
< 200
570 to 620
60g
(Mo)
49XX-1M3
390
490
22
90 to 110
605 to 645
60h
(Mo)
49YY-1M3
390
490
20
90 to 110
605 to 645
60h
355
510
18
47
38
200 to 300
690 to 730
60g
(55XX-CM)
355
510
22
47
38
100 to 200
600 to 650
60g
MoV
CrMo0,5
(CrMo0,5)
55XX-CM
460
550
17
160 to 190
675 to 705
60h
55XX-C1M
460
550
17
160 to 190
675 to 705
60h
CrMo1
(55XX-1CM)
(5513-1CM)
355
510
20
47
38
150 to 250
660 to 700
60g
(CrMo1)
55XX-1CM
460
550
17
160 to 190
675 to 705
60h
(CrMo1)
5513-1CM
460
550
14
160 to 190
675 to 705
60h
CrMo1L
(52XX-1CML)
355
510
20
47
38
150 to 250
660 to 700
60g
(CrMo1L)
52XX-1CML
390
520
17
160 to 190
675 to 705
60h
435
590
15
24
19
200 to 300
680 to 730
60g
CrMo2
(62XX-2C1M)
(6213-2C1M)
400
500
18
47
38
200 to 300
690 to 750
60g
(CrMo2)
62XX-2C1M
530
620
15
160 to 190
675 to 705
60h
(CrMo2)
6213-2C1M
530
620
12
160 to 190
675 to 705
60h
CrMo2L
(55XX-2C1ML)
400
500
18
47
38
200 to 300
690 to 750
60g
(CrMo2L)
55XX-2C1ML
460
550
15
160 to 190
675 to 705
60h
55XX-2CML
460
550
15
160 to 190
675 to 705
60h
62XX-2C1MV
530
620
15
160 to 190
725 to 755
60g
62XX-3C1MV
530
620
15
160 to 190
725 to 755
60h
CrMo5
(55XX-5CM)
400
590
17
47
38
200 to 300
730 to 760
60g
(CrMo5)
55XX-5CM
460
550
17
175 to 230
725 to 755
60h
55XX-5CML
460
550
17
175 to 230
725 to 755
60h
CrMo9
(62XX-9C1M)
435
590
18
34
27
200 to 300
740 to 780
120g
(CrMo9)
62XX-9C1M
530
620
15
205 to 260
725 to 755
60h
62XX-9C1ML
530
620
15
205 to 260
725 to 755
60h
(62XX-9C1MV)
415
585
17
47
38
200 to 300
750 to 770
120 to
180
CrMoV1
CrMo91
EN ISO 3580 B
d.o.o.
Table 2 (continued)
Chemical composition
symbola for classification
according to
Chemical
composition
ISO 3580-A
Tensile
strength and
chemical
composition
ISO 3580-Bb
Minimum
yield
strength c
Minimum
tensile
strength
Impact energy
J at + 20 C
Minimum d
elongation
MPa
MPa
Minimum
average
from three
test
specimens
Minimum
single
valuee
Preheat and
interpass
temperature
C
Time
min
(CrMo91)
62XX-9C1MV
530
620
15
230 to 290
725 to 755
60h
(CrMo91)
62XX-9C1MV1
530
620
15
205 to 260
725 to 755
60h
550
690
15
34
27
250 to 350i
740 to 780
120g
CrMoWV12
or
400 to 500i
A designation in parentheses [e.g., (CrMo1) or (1CM)] indicates a near match in the other designation system, but not an exact
match. The correct designation for a given composition range is the one without parentheses. A given product may, by having a more
restricted chemical composition that fulfils both sets of mechanical property requirements, be classified in both systems independently,
provided that the chemical composition requirements of Table 1 are also satisfied.
XX stands for coating types 15, 16 or 18. YY stands for coating types 10, 11, 19, 20 or 27. See Table 3B.
For yield strength, the lower yield, ReL, shall be used when yielding occurs; otherwise the 0,2 % proof strength, Rp0,2, shall be used.
Only one single value lower than the minimum average is permitted.
The test assembly shall be cooled in the furnace to 300 C at a rate not exceeding 200 C/h.
Tolerance shall be zero, plus 10 min. The heating rate in the furnace shall be 85 C to 275 C/h.
Immediately after welding the specimen is to be allowed to cool down to 120 C to 100 C and kept at this temperature for at least
1 h.
d.o.o.
EXAMPLE:
ISO 17632A T 46 3 1Ni B M 1 H5
T:
46:
3:
1Ni:
B:
M:
1:
H5:
ISO 17632-A:
Table 1A
Symbol
Minimum yield
a
strength
Tensile
strength
35
38
42
46
50
355
380
420
460
500
440 to 570
470 to 600
500 to 640
530 to 680
560 to 720
MPa
MPa
Minimum
b
elongation
%
22
20
20
20
18
For yield strength the yield, ReL, is used when yielding occurs, otherwise the 0,2 % proof
strength, Rp0,2, is used.
b
Gauge length is equal to five times the test specimen diameter.
Table 7
Symbol
H5
H10
H15
Hydrogen content
max.
ml/100g of deposited weld
metal
5
10
15
d.o.o.
Table 3
Symbol
Z
A or Y
a
b
c
-20
-30
-40
-50
-60
-70
-80
-90
10
-100
Only the symbol Z is used for electrodes for the single-run technique.
Classification by yield strength and 47 J impact energy.
Classification by tensile strength and 27 J impact energy.
Table 5A
Symbol
Characteristics
Basic
Metal powder
Rutile or
basic/fluoride
Y
Z
Symbol
+20
Table 6A
Basic/fluoride,
slow-freezing
slag
Basic/fluoride,
fast-freezing
slag
Other types
Types of
weld
Single and
multiple
pass
Single and
multiple
pass
Single and
multiple
pass
Single and
multiple
pass
Single and
multiple
pass
Single and
multiple
pass
Single and
multiple
pass
Shielding
gas
Required
Required
Required
Required
Not required
Not required
Not required
1
2
3
4
5
Welding positions
PA = Flat position
PB = Horizontal vertical position
PC = Horizontal position
PD = Horizontal overhead position
PE = Overhead position
PF = Vertical up position
PG = Vertical down position
d.o.o.
d.o.o.
EXAMPLE:
ISO 17632B T554T5-1MA-N2-UH5
T:
55:
4:
T5:
1:
M:
A:
N2:
ISO 17632-B:
U:
H5:
Table 1B
Symbol
Minimum yield
a
strength
Tensile
strength
43
49
55
57
330
390
460
490
430 to 600
490 to 670
550 to 740
570 to 770
MPa
MPa
Minimum
b
elongation
%
20
18
17
17
For yield strength the yield, ReL, is used when yielding occurs, otherwise the 0,2 % proof
strength, Rp0,2, is used.
b
Gauge length is equal to five times the test specimen diameter.
Table 7
Symbol
H5
H10
H15
Hydrogen content
max.
ml/100g of deposited weld
metal
5
10
15
d.o.o.
Table 3
Symbol
Z
A or Y
a
b
c
+20
-20
-30
-40
-50
-60
-70
-80
-90
10
-100
Only the symbol Z is used for electrodes for the single-run technique.
Classification by yield strength and 47 J impact energy.
Classification by tensile strength and 27 J impact energy.
Table 6B
Symbol
Welding positions
PA & PB
PA = Flat position
PB = Horizontal vertical position
PC = Horizontal position
PD = Horizontal overhead position
PE = Overhead position
PF = Vertical up position
PG = Vertical down position
d.o.o.
d.o.o.
d.o.o.
EXAMPLE:
ISO 14341A G 46 5 M G3Si1
G:
46:
5:
M:
G3Si1:
ISO 14341-A:
Table 1
Symbol
Minimum yield
a
strength
Tensile
strength
35
38
42
46
50
355
380
420
460
500
440 to 570
470 to 600
500 to 640
530 to 680
560 to 720
MPa
MPa
Minimum
b
elongation
%
22
20
20
20
18
For yield strength the yield, ReL, is used when yielding occurs, otherwise the 0,2 % proof
strength, Rp0,2, is used.
b
Gauge length is equal to five times the test specimen diameter.
Table 2
Symbol
Z
a,b
or 27 J (C)
No requirements
-50
+20
-60
-70
-20
-80
-30
-90
-40
10
-100
A or Y
Three specimen must reach average impact energy of 47J, only one of them min 32J .
Among five specimen the highest and the lowest values arent taken be in account; the average of other thee must be
27 J, only one them can be min 20J. .
d.o.o.
Si
Mn
G0
Ni
Cr
Mo
Cu
Al
Ti+Zr
G2Si
0,025
0,025
0,15
0,15
0,15
0,03
0,35
0,02
0,15
G3Si1
0,025
0,025
0,15
0,15
0,15
0,03
0,35
0,02
0,15
G3Si2
0,025
0,025
0,15
0,15
0,15
0,03
0,35
0,02
0,15
G4Si1
0,025
0,025
0,15
0,15
0,15
0,03
0,35
0,02
0,15
G2Ti
0,025
0,025
0,15
0,15
0,15
0,03
0,35
0,05 to 0,05 to
0,20
0,25
G2Al
0,025
0,025
0,15
0,15
0,15
0,03
0,35
0,35 to
0,75
0,15
G3Ni1
0,020
0,020
0,80 to
1,50
0,15
0,15
0,03
0,35
0,02
0,15
G2Ni2
0,020
0,020
2,10 to
2,70
0,15
0,15
0,03
0,35
0,02
0,15
G2Mo
0,020
0,020
0,15
0,15
0,40 to
0,60
0,03
0,35
0,02
0,15
G4Mo
0,025
0,025
0,15
0,15
0,40 to
0,60
0,03
0,35
0,02
0,15
If not specified: Cr < 0,15%; Cu < 0,35 %; V < 0,03 %. Copper from steel and copper from coating shall not exceed 0,35 % (mass).
The results shall be rounded to the same number of significant figures as in the specified value using the rule A in accordance with
Annex B of ISO 31-0:1992.
d.o.o.
EXAMPLE:
ISO 14341B G 49A 6 M G3
G:
49A:
6:
M:
G3:
ISO 14341-B:
Table 1
Symbol
43X
49X
55X
57X
Minimum yield
b
strength
Tensile
strength
330
390
460
490
430 to 600
490 to 670
550 to 740
570 to 770
MPa
MPa
Minimum
c
elongation
%
20
18
17
17
Table 2
Symbol
Z
a,b
or 27 J (C)
No requirements
-50
+20
-60
-70
-20
-80
-30
-90
-40
10
-100
A or Y
Three specimen must reach average impact energy of 47J, only one of them min 32J .
Among five specimen the highest and the lowest values arent taken be in account; the average of other thee must be
27 J, only one them can be min 20J. .
d.o.o.
Si
Mn
G0
Ni
Cr
Mo
Cu
Al
Ti+Zr
G2
0,07
0,40 to
0,70
0,90 to
0,025
1,40
0,030
0,50
0,05 to
0,15
G3
0,06 to
0,15
0,45 to
0,75
0,90 to
0,025
1,40
0,035
0,50
G4
0,06 to
0,15
0,65 to
0,85
1,00 to
0,025
1,50
0,035
0,50
G6
0,06 to
0,15
0,80 to
1,15
1,40 to
0,025
1,85
0,035
0,50
G7
0,07 to
0,15
0,50 to
0,80
1,50 to
0,025
2,00
0,035
0,50
G11
0,02 to
0,15
0,55 to
1,10
1,40 to
0,030
1,90
0,030
0,50
0,02 to 0,30
G12
0,02 to
0,15
0,55 to
0,10
1,25 to
0,030
1,90
0,030
0,50
G13
0,02 to
0,15
0,55 to
1,10
1,35 to
0,030
1,90
0,030
0,50
G14
0,02 to
0,15
1,00 to
1,35
1,30 to
0,030
1,60
0,030
0,50
G15
0,02 to
0,15
0,40 to
1,00
1,00 to
0,030
1,60
0,030
0,50
0,02 to 0,15
G16
0,02 to
0,15
0,40 to
1,00
0,90 to
0,030
1,60
0,030
0,50
G17
0,02 to
0,15
0,20 to
0,55
1,50 to
0,030
2,10
0,030
0,50
G18
0,02 to
0,15
0,50 to
1,10
1,60 to
0,030
2,40
0,030
0,50
0,02 to 0,30
G1M3
0,12
0,30 to
0,70
0,025
0,025
0,020
0,40 to
0,65
0,35
G2M3
0,12
0,30 to
0,70
0,60 to
0,025
1,40
0,025
0,40 to
0,65
0,50
G2M31
0,12
0,30 to
0,90
0,80 to
0,025
1,50
0,025
0,40 to
0,65
0,50
G3M3T
0,12
0,40 to
1,00
0,80 to
0,025
1,50
0,025
0,40 to
0,65
0,50
G3M1
0,02 to
0,15
0,30 to
0,70
0,60 to
0,025
1,40
0,025
0,10 to
0,45
0,50
G3M1T
0,12
0,40 to
1,00
1,40 to
0,025
2,10
0,025
0,10 to
0,45
0,50
G4M31
0,05 to
0,15
0,50 to
0,80
1,60 to
0,025
2,10
0,025
0,40 to
0,65
0,40
1,30
0,10 to
0,02 to 0,30
0,50
0,10 to
0,02 to 0,30
0,50
d.o.o.
Table 3 (continued)
Chemical composition, mass % a,b, c
symbol
Si
G4M3T
0,12
0,50 to
0,80
Mn
GN1
0,12
0,20 to
0,50
1,25
GN2
0,12
0,40 to
0,80
1,25
GN3
0,12
0,30 to
0,80
GN5
0,12
0,40 to
0,80
1,25
GN7
0,12
0,20 to
0,50
1,25
GN71
0,12
0,30 to
0,80
1,25
GN9
0,10
0,50
1,40
GNCC
0,12
GNCCT
GNCCT1
1,60 to
0,025
2,20
Ni
Cr
Mo
Cu
Al
Ti+Zr
0,50
0,025
0,40 to
0,65
0,025
0,025
0,60 to
1,00
0,35
0,35
0,025
0,025
0,80 to
1,10
0,15
0,35
0,05
0,35
1,20 to
0,025
1,60
0,025
1,50 to
1,90
0,35
0,35
0,025
0,025
2,00 to
2,75
0,35
0,025
0,025
3,00 to
3,75
0,35
0,35
0,025
0,025
3,00 to
3,75
0,35
0,025
0,025
4,00 to
4,75
0,35
0,35
0,60 to
0,90
1,00 to
0,030
1,65
0,030
0,10 to
0,30
0,50 to
0,80
0,20 to
0,60
0,12
0,60 to
0,90
1,10 to
0,030
1,65
0,030
0,10 to
0,30
0,50 to
0,80
0,20 to
0,60
0,12
0,50 to
0,80
1,20 to
0,030
1,80
0,030
0,10 to
0,40
0,50 to 0,02 to
0,80
0,30
0,20 to
0,60
GNCCT2
0,12
0,50 to
0,90
1,10 to
0,030
1,70
0,030
0,40 to
0,80
0,50 to
0,80
0,20 to
0,60
GN1M2T
0,12
0,60 to
1,00
1,70 to
0,025
2,30
0,025
0,40 to
0,80
0,20 to
0,60
0,50
GN1M1T
0,12
0,30 to
0,80
1,10 to
0,025
1,90
0,025
0,80 to
1,60
0,10 to
0,45
0,50
0,05 to
GN2M2T
0,15
0,30 to
0,90
1,10 to
0,025
1,80
0,025
0,70 to
1,20
0,20 to
0,60
0,50
0,05 to
0,15
0,30 to
0,90
1,40 to
0,025
2,10
0,025
0,70 to
1,20
0,40 to
0,65
0,50
0,12
0,50 to
1,00
1,70 to
0,025
2,30
0,025
0,80 to
1,30
0,55 to
0,85
0,50
GN2M3T
GN2M4T
The total of all other non-listed elements (except Fe) shall not exceed 0,50 %.
The results shall be rounded to the same number of significant figures as in the specified value using the rule A in accordance with
Annex B of ISO 31-0:1992.
d.o.o.
ISO 14343-A
ISO 14343-B
A wire electrode for gas-shielded arc welding, also applicable to submerged arc welding, has a chemical
composition within the limits for the alloy symbol 20 10 3 and within the limits for the alloy symbol 308Mo of Table
1
ISO 14343-A - G 20 10 3
A rod for gas tungsten arc welding has a chemical composition within the limits for the alloy symbol 20 10 3 and
within the limits for the alloy symbol 308Mo of Table 1
ISO 14343-A - G 19 12 3 L Si
A wire electrode for gas-shielded arc welding has a chemical composition within the limits for the alloy symbol 19
12 3 L Si and within the limits for the alloy symbol 316LSi.
G
W
P
S
L
20 10 3
19 12 3 L Si
Table 1 Chemical
composition of product
SS Solid wire
Stainless and heat resistant
SS308Mo
SS316LSi
Table 1 Chemical
composition of product
d.o.o.
ISO 14343B
Nominal
f
composition
ISO 14343-A
Alloy Type
b,c
Si
Mn
Cr
NI
Mo
Cu
409
0,08
0,8
0,8
0,03
0,03
10,5 to
13,5
0,6
0,5
0,75
Ti:10xC to
1,5
409Nb
0,12
0,5
0,6
0,03
0,03
10,5 to
13,5
0,6
0,75
0,75
8 x C to
1,0
(410)
0,15
1,0
1,0
0,03
0,02
12,0 to
15
0,3
0,3
0,3
0,6
0,75
0,75
Nb
Other
Martensitic/ferritic types
13
(13)
410
13L
0,12
0,5
0,6
0,03
0,03
11,5 to
13,5
0,05
1,0
1,0
0,03
0,02
12,0 to
15
0,3
0,3
0,3
13 4
(410NiMo)
0,05
1,0
1,0
0,03
0,02
11,0 to
14
3,0 to
5,0
0,4 to
1,0
0,3
(13 4)
410NiMo
0,06
0,5
0,6
0,03
0,03
11,0 to
12,5
4,0 to
5,0
0,4 to
0,7
0,75
420
0,25 to
0,40
0,5
0,6
0,03
0,03
12,0 to
14,0
0,75
0,75
0,75
0,3
0,3
0,3
0,6
0,75
0,3
17
(430)
0,12
1,0
1,0
0,03
0,02
16,0 to
19,0
(17)
430
0,10
0,5
0,6
0,03
0,03
15,5 to
17,0
0,6
0,75
0,3
8 x C to
1,2
18LNb
430Nb
0,10
0,5
0,6
0,03
0,03
15,5 to
17,0
430LNb
0,02
0,5
0,8
0,03
0,02
17,8 to
18,8
0,3
0,3
0,02
0,3
0,05+7(C
+N) up
to 0,5
0,08
0,65
1,0 to
2,5
0,03
0,03
19,5 to
22,0
9,0 to
11,0
0,75
0,75
9,0 to
11,0
0,75
0,75
Austenitic types
308
0,65 to 1,0 to
1,00
2,5
0,03
0,03
19,5 to
22,0
308Si
0,08
19 9L
(308L)
0,03
0,65
1,0 to
2,5
0,03
0,02
19,5 to
22,0
9,0 to
11,0
0,75
0,75
(19 9L)
308L
0,03
0,65
1,0 to
2,5
0,03
0,03
19,5 to
22,0
9,0 to
11,0
0,75
0,75
9,0 to
11,0
0,3
0,3
9,0 to
11,0
0,75
0,75
19 9LSi
(308LSi)
0,03
0,65 to 1,0 to
1,2
2,5
(19 9LSi)
308LSi
0,03
0,65 to 1,0 to
1,0
2,5
0,03
0,02
19,0 to
21,0
0,03
0,03
19,5 to
22,0
d.o.o.
Table 1 (continued)
a
ISO 14343B
Nominal
f
composition
ISO 14343-A
Alloy Type
b,c
Si
Mn
Cr
NI
Mo
Cu
Nb
Other
19 9Nb
(347)
0,08
0,65
1,0 to
2,5
0,03
0,02
19,0 to
21,0
9,0 to
11,0
0,3
0,3
10 x C
to 1,0
(19 9Nb)
347
0,08
0,65
1,0 to
2,5
0,03
0,03
19,0 to
21,5
9,0 to
11,0
0,75
0,75
10 x C
to 1,0
9,0 to
11,0
0,3
0,3
10 x C
to 1,0
0,75
0,75
10 x C
to 1,0
19 9NbSi
(347Si)
0,08
0,65 to 1,0 to
1,2
2,5
(19 9NbSi)
347Si
0,08
0,65 to 1,0 to
1,0
2,5
347L
0,03
0,65
1,0 to
2,5
0,03
0,03
19,0 to
21,5
316
0,08
0,65
1,0 to
2,5
0,03
0,03
18,0 to
20,0
11,0 to
14,0
2,0 to
3,0
0,75
10 x C
to 1,0
316Si
0,08
0,65 to 1,0 to
1,0
2,5
0,03
0,03
18,0 to
20,0
11,0 to
14,0
2,0 to
3,0
0,75
19 12 3 L
(316L)
0,03
0,65
1,0 to
2,5
0,03
0,02
18,0 to
20,0
11,0 to
14,0
2,5 to
3,0
0,3
(19 12 3 L)
316L
0,03
0,65
1,0 to
2,5
0,03
0,03
18,0 to
20,0
11,0 to
14,0
2,0 to
3,0
0,75
11,0 to
14,0
2,5 to
3,0
0,3
0,03
0,02
19,0 to
21,0
0,03
0,03
19,0 to
21,5
9,0 to
11,0
9,0 to
11,0
0,75
0,75
10 x C
to 1,0
19 12 3 LSi
(316LSi)
0,03
0,65 to 1,0 to
1,2
2,5
(19 12 3 LSi)
316LSi
0,03
0,65 to 1,0 to
1,0
2,5
0,03
0,03
18,0 to
20,0
11,0 to
14,0
2,0 to
3,0
0,75
316LCu
0,03
0,65
1,0 to
2,5
0,03
0,03
18,0 to
20,0
11,0 to
14,0
2,0 to
3,0
1,0 to
2,5
19 12 3 Nb
(318)
0,08
0,65
1,0 to
2,5
0,03
0,02
18,0 to
20,0
11,0 to
14,0
2,5 to
3,0
0,3
10 x C
to 1,0
(19 12 3 Nb)
318
0,08
0,65
1,0 to
2,5
0,03
0,03
18,0 to
20,0
11,0 to
14,0
2,0 to
3,0
0,75
10 x C
to 1,0
0,65
1,0 to
2,5
0,03
0,03
18,0 to
20,0
11,0 to
14,0
2,0 to
3,0
0,75
10 x C
to 1,0
0,08
0,65 to 1,0 to
1,2
2,5
0,03
0,02
18,0 to
20,0
11,0 to
14,0
2,5 to
3,0
0,3
10 x C
to 1,0
317
0,08
0,65
1,0 to
2,5
0,03
0,03
18,5 to
20,5
13,0 to
15,0
3,0 to
4,0
0,75
317L
0,03
0,65
1,0 to
2,5
0,03
0,03
18,5 to
20,5
13,0 to
15,0
3,0 to
4,0
0,75
321
0,08
0,65
1,0 to
2,5
0,03
0,03
18,5 to
20,5
9,0 to
10,5
0,75
0,75
Ti: 9xC
to 1,0
318L
19 12 3 NbSi
(18 15 3 L)
0,03
0,03
0,02
18,0 to
20,0
d.o.o.
Table 1 (continued)
a
Alloy Type
Nominal
f
composition
ISO 14343-A
Si
Mn
Cr
NI
Mo
b,c
Cu
Nb
Other
(2209)
(22 9 3 NL)
0,03
2209
25 7 2 L
1,0
2,5
0,03
0,90
2,5 to
2,0
0,03
1,0
2,5
0,02
21,0 to
24,0
7,0 to
10,0
2,5 to 0,10 to
0,20
4,0
0,3
0,03
0,02
21,5 to
23,5
7,5 to
9,5
2,5 to 0,08 to
0,20
3,5
0,75
0,03
0,02
24,0 to
27,0
6,0 to
8,0
1,5 to
2,5
0,3
8,0 to
11,0
0,03
25 9 3CuNL
0,03
1,0
2,5
0,03
0,02
24,0 to
27,0
25 9 4NL
0,03
1,0
2,5
0,03
0,02
24,0 to
27,0
8,0 to
10,5
2,5 to 0,20 to
0,30
4,5
1,5
W 1,0
0,3
18 16 5NL
19 13 4L
19 13 4NL
(317)
0,03
1,0
1,0 to
4,0
0,03
0,02
17,0 to
20,0
13,0 to
16,0
2,5 to
4,0
(317)
0,03
1,0
1,0 to
4,0
0,03
0,02
17,0 to
20,0
16,0 to
19,0
3,5 to 0,10 to
0,20
5,0
0,3
0,03
1,0
1,0 to
5,0
0,03
0,02
17,0 to
20,0
12,0 to
15,0
3,0 to
4,5
0,3
0,03
1,0
1,0 to
5,0
0,03
0,02
17,0 to
20,0
12,0 to
15,0
3,0 to 0,10 to
0,20
4,5
0,3
0,03
1,0
1,0 to
4,0
0,03
0,02
19,0 to
22,0
24,0 to
27,0
4,0 to
6,0
1,0 to
2,0
0,025
0,50
1,0 to
2,5
0,02
0,03
19,5 to
21,5
24,0 to
26,0
4,2 to
5,2
1,2 to
2,0
(317L)
20 25 5CuL
(385)
(20 25 5CuL)
385
20 25 5CuNL
0,03
1,0
1,0 to
4,0
0,03
0,02
19,0 to
22,0
24,0 to
27,0
20 16 3 MnL
0,03
1,0
5,0 to
9,0
0,03
0,02
19,0 to
22,0
15,0 to
18,0
2,5 to
4,5
0,3
0,03
0,02
19,0 to
22,0
15,0 to
18,0
2,5 to 0,10 to
0,20
4,5
0,3
0,03
0,02
24,0 to
27,0
21,0 to
24,0
1,5 to 0,10 to
0,20
3,0
30,0 to
33,0
3,0 to
4,5
20 16 3 MnNL
0,03
1,0
5,0 to
9,0
25 22 2 N L
0,03
1,0
3,5 to
6,5
0,03
1,0
1,0 to
3,0
0,03
0,02
26,0 to
29,0
27 31 4 Cu L
(27 31 4 Cu L)
f
(383)
0,3
0,7 to
1,5
383
0,025
0,50
1,0 to
2,5
0,02
0,03
26,5 to
28,5
30,0 to
33,0
3,2 to
4,2
0,7 to
1,5
320
0,07
0,60
2,5
0,03
0,03
19,0 to
21,0
32,0 to
36,0
2,0 to
3,0
3,0 to 8 x C to
4,0
1,0
0,025
0,15
1,5 to
0,015 0,02
2,0
19,0 to
21,0
32,0 to
36,0
2,0 to
3,0
3,0 to 8 x C to
4,0
0,40
320LR
Table 1 (continued)
d.o.o.
a
AlloyAlloy
TypeType
(16-8-2)
16-8-2
(16 8 2)
19 9 H
(19-10H)
19 9 H
0,10
1,0
0,10
0,10
1,0
0,65
16-8-2 0,04
0,10to
0,08
0,04 to
(19-10H)
0,08
Table 1 (continued)
Table 1 (continued)
0,65
1,0
1,0
1,0 to
2,5
1,0 to
1,0
2,5to
2,5
1,0 to
1,0
2,5to
2,5
1,0 to
2,5
0,03
0,03
0,03
0,03
0,02
0,02
0,02
0,02
0,03
0,03
0,02
0,02
0,02
0,02
0,02
0,02
0,02
0,02
0,02
0,02
0,03
0,03
0,03
0,03
0,02
0,02
0,03
0,03
0,02
0,02
0,03
0,03
0,03
0,02
0,03
0,03
0,02
0,03
0,03
0,03
0,03
0,02
0,03
0,02
19,5 to
22,0
19,5 to
17,0
22,0to
20,0
17,0 to
18,0
20,0to
21,0
18,0 to
18,0
21,0to
21,0
18,0 to
18,0
21,0to
21,0
18,0 to
22,0
21,0to
25,0
22,0 to
23,0
25,0to
25,0
23,0 to
22,0
25,0to
25,0
22,0 to
23,0
25,0to
25,0
23,0 to
22,0
25,0to
25,0
22,0 to
23,0
25,0to
25,0
23,0 to
23,0
25,0to
25,0
23,0 to
21,0
25,0to
25,0
21,0 to
23,0
25,0to
25,0
23,0 to
28,0
25,0to
32,0
28,0 to
28,0
32,0to
32,0
28,0 to
32,0
8,0 to
10,7
8,0 to
7,0
10,7to
10,0
7,0 to
8,0
10,0to
12,0
8,0 to
9,0
12,0to
12,0
9,0 to
9,0
12,0to
12,0
9,0 to
11,0
12,0to
14,0
11,0 to
12,0
14,0to
14,0
12,0 to
11,0
14,0to
14,0
11,0 to
12,0
14,0to
14,0
12,0 to
11,0
14,0to
14,0
11,0 to
12,0
14,0to
14,0
12,0 to
12,0
14,0to
14,0
12,0 to
11,0
14,0to
15,5
11,0 to
12,0
15,5to
14,0
12,0 to
8,0
14,0to
12,0
8,0 to
8,0
12,0to
10,5
8,0 to
10,5
14,5 to
16,5
14,5 to
14,5
16,5to
16,5
14,5 to
18,0
16,5to
21,0
18,0 to
21,0
7,5 to
9,5
7,5 to
7,5
9,5to
9,5
7,5 to
9,0
9,5to
11,0
9,0 to
11,0
0,5 to
1,5
0,5 to
1,5
0,3
Cu
Nb
Other
Cu
Nb
Other
0,75
0,75
0,3
0,3to
1,5
3,5
1,5 to
2,0
3,5to
3,0
2,0 to
2,0
3,0to
3,0
2,0 to
3,0
0,3
0,3
0,3
0,3
0,75
0,75
0,75
0,75
0,3
0,3
0,75
0,3
0,75
0,75
0,3
0,75
0,3
0,3
0,75
0,3
0,75
0,75
0,3
0,75
0,3
0,3
0,75
0,3
0,75
0,75to
2,0
3,0
2,0 to
2,0
3,0to
3,5
2,0 to
2,0
3,5to
3,0
2,0 to
3,0
0,3
0,75
0,75
10 x C
to 1,0
10 x C
10
xC
to 1,0
to 1,0
10 x C
to
1,0
0,75
0,3
0,3
0,75
0,75
0,3
0,3
0,75
0,3
0,75
0,75
0,75
0,3
0,3
0,75
0,75
0,3
0,3
1,0 to
2,5
1,0 to
1,0
2,5to
2,0
1,0 to
2,0
0,3
0,3
d.o.o.
a
ISO ISO
1434314343B B
AlloyAlloy
Type
Type
(19 9 H)
19 12 3 H
19 12 3 H
(19 12 3 H)
(19 12 3 H)
22 12 H
22 12 H
(22 12 H)
(22 12 H)
25 4
25 4
f
25 20
f
25 20
f
(25 20)
(25 20)
Cr
NI
Mo
Cu
Nb
Other
Si
Mn
Cr
NI
Mo
Cu
Nb
Other
0,65
0,03
0,03
0,75
0,05
Ti 0,05
0,03
0,03
0,25
0,50
0,75
0,75
0,05
Ti 0,05
0,03
0,03
0,03
0,02
0,75
0,3
0,02
0,03
0,3
0,75
0,03
0,03
0,03
0,02
0,50
2,0 to
3,0
2,0 to
3,0to
2,0
3,0
2,0 to
3,0
0,3
0,03
0,03
0,75
0,3
0,03
0,03
0,02
0,03
0,3
0,75
0,3
0,75
0,03
0,03
0,03
0,03
0,75
0,75
0,75
0,75
0,03
0,03
0,03
0,02
0,75
0,3
0,75
0,3
0,03
0,03
0,02
0,02
0,3
0,3
0,3
0,3
0,03
0,03
0,02
0,03
0,3
0,75
0,3
0,75
0,03
0,03
0,03
0,03
0,75
0,75
0,75
0,75
0,03
0,03
0,03
0,03
0,75
0,75
0,75
0,75
0,03
0,03
0,03
0,02
0,75
0,3
0,75
0,3
0,03
0,03
0,02
0,02
0,3
0,3
0,3
0,3
0,03
0,03
0,02
0,02
0,3
0,3
0,3
0,3
0,03
0,03
0,02
0,03
0,3
0,75
0,3
0,75
0,03
0,03
9,0 to
11,0
9,0 to
11,0to
9,0
11,0
9,0 to
11,0to
11,0
14,0
11,0 to
14,0to
11,0
14,0
11,0 to
14,0to
11,0
14,0
11,0 to
14,0to
12,0
14,0
12,0 to
14,0to
12,0
14,0
12,0 to
14,0to
4,0
6,0
4,0 to
6,0 to
18,0
22,0
18,0 to
22,0to
20,0
22,5
20,0 to
22,5to
20,0
22,5
20,0 to
22,5to
20,0
22,5
20,0 to
22,5to
18,0
22,0
18,0 to
22,0to
18,0
22,0
18,0 to
22,0to
33,0
37,0
33,0 to
37,0to
34,0
37,0
34,0 to
37,0
0,03
0,03
18,5 to
20,0
18,5 to
20,0to
19,5
22,0
19,5 to
22,0to
18,0
20,0
18,0 to
20,0to
18,0
20,0
18,0 to
20,0to
21,0
24,0
21,0 to
24,0to
23,0
25,0
23,0 to
25,0to
23,0
25,0
23,0 to
25,0to
24,0
27,0
24,0 to
27,0to
24,0
27,0
24,0 to
27,0to
25,0
28,0
25,0 to
28,0to
25,0
28,0
25,0 to
28,0to
25,0
28,0
25,0 to
28,0to
24,0
27,0
24,0 to
27,0to
24,0
27,0
24,0 to
27,0to
15,0
19,0
15,0 to
19,0to
15,0
17,0
15,0 to
17,0
0,25
0,65
0,65
0,75
0,75
0,12
0,15
(310)
f
310
310L
0,08
0,03
0,03
0,35 to
0,45
0,35 to
0,45to
0,08
0,15
0,08 to
0,15to
0,18
0,25
0,18 to
0,25to
0,18
0,25
0,18 to
0,25
25 20 H
f
25 20 Mn
f
(330)
18 36 H
f
(18 36 H)
f
0,15
0,08 to
0,15
0,08 to
0,15to
0,08
0,15
0,08 to
0,15
0,08
(18 36 H)
309Si
310
f
310S
25 20 Mn
f
18 36 H
0,12
0,12
310S
f
310L
25 20 H
Mn
309
309Si
(330)
330
330
Table 1 (continued)
Table 1 (continued)
b,c
Si
0,04 to
0,08
0,04 to
19-10H
0,08to
0,04
308H
0,08
0,04 to
308H
0,08to
0,04
(316H)
0,08
0,04 to
(316H)
0,08to
0,04
316H
0,08
0,04 to
316H
0,08to
0,04
(309)
0,15
0,04 to
(309)
0,15
309
0,12
(310)
b,c
19-10H
(19 9 H)
(19 9 H)
1,0 to
2,0
1,0 to
2,0to
1,0
2,5
1,0 to
0,65
2,5to
1,0
1,0
2,5
1,0 to
1,0
2,5to
1,0
0,65
2,5
1,0 to
0,65
2,5to
1,0
2,0
2,5
1,0 to
2,0
2,5to
1,0
0,65
2,5
1,0 to
0,65
2,5to
0,65 to 1,0
1,0
2,5
0,65 to 1,0 to
1,0
2,5to
1,0
2,0
2,5
1,0 to
2,0
2,5to
1,0
2,0
2,5
1,0 to
2,0
2,5to
1,0
0,65
2,5
1,0 to
0,65
2,5to
1,0
0,65
2,5
1,0 to
0,65
2,5to
1,0
0,65
2,5
1,0 to
0,65
2,5to
1,0
2,0
2,5
1,0 to
2,0
2,5to
2,5
2,0
5,0
2,5 to
2,0
5,0to
0,4 to 1,0
2,0
2,5
0,4 to 1,0 to
2,0
2,5to
1,0
0,65
2,5
1,0 to
0,65
2,5
d.o.o.
ISO 14343B
B
Alloy Type
Alloy
Type
ISO
14343-
630
0,05
0,75
0,03 0,03
0,75
to 4,0
0,75
16,75
0,25 to
16,0 to 5,0
4,5 to
3,25 0,30
0,15 to
630
0,05
0,75
0,03 0,03
0,75
0,75
16,75
5,0
to 4,0
0,30
a
A designation in parentheses e.g. (308L) or (19/9L) indicates a near match in the other designation system, but not an exact match. The
correct
a given composition
range
the one
not in parentheses.
product
may, by having
more
a Adesignation
designationfor
in parentheses
e.g. (308L)
or is
(19/9L)
indicates
a near matchAingiven
the other
designation
system,abut
notrestricted
an exact chemical
match. The
composition
which fulfils
setscomposition
of designation
requirements,
both designations
independently.
correct designation
forboth
a given
range
is the one be
notassigned
in parentheses.
A given product
may, by having a more restricted chemical
which fulfils both sets of designation requirements, be assigned both designations independently.
b composition
Single values shown in the table are maximum values.
b
Single values shown in the table are maximum values.
The results shall be rounded to the same number of significant figures as in the specified value using the rule A in accordance with
Annex
B of ISO
31-0:1992.
c
The
results
shall be rounded to the same number of significant figures as in the specified value using the rule A in accordance with
B of ISO 31-0:1992.
d Annex
Wire electrodes
not listed in the table shall be symbolisied similarly and prefixed by the letter Z.
c
electrodes
not listed
in the
shall be by
symbolisied
similarly and prefixed by the letter Z.
e d UpWire
to 20%
of the amount
of Nb
cantable
be replaced
Ta.
f e Up to 20% of the amount of Nb can be replaced by Ta.
The all-weld metal is in most cases fully austenitic and therefore can be susceptible to microfissuring or hot cracking. The occurrence of
fissuring/cracking
reduced
increasing
theaustenitic
weld metal
Mn-level
andcan
in recognition
of this
the Mn-range or
is extended
for aThe
number
of
f The all-weld is
metal
is in by
most
cases fully
and
therefore
be susceptible
to microfissuring
hot cracking.
occurrence
of
grades.
fissuring/cracking is reduced by increasing the weld metal Mn-level and in recognition of this the Mn-range is extended for a number of
grades.
d.o.o.
EXAMPLE 1:
ISO 16834A G 62 6 M Mn4Ni1Mo
G:
62:
ISO 16834-A:
6:
M:
Mn4Ni1Mo:
EXAMPLE 2:
ISO 16834A W 55 6 Mn4Ni1MoT
W:
55:
ISO 16834-A:
6:
Mn4Ni1Mo:
Table 1
Symbol
G
W
Table 2
a
b
Symbol
Minimum yield
a
strength
Tensile
strength
55
62
69
79
89
550
620
690
790
890
640 to 820
700 to 890
770 to 940
880 to 1080
940 to 1180
MPa
MPa
Minimum
b
elongation
%
18
18
17
16
15
For yield strength the yield, ReL, is used when yielding occurs, otherwise the 0,2 % proof
strength, Rp0,2, is used.
Gauge length is equal to five times the test specimen diameter.
d.o.o.
Si
Mn
0,14
0,60 to
0,80
1,30 to
1,80
Mn3Ni1CrMo
0,12
0,40 to
0,70
1,30 to
1,80
Mn3Ni1Mo
0,12
0,40 to
0,80
Mn3Ni1,5Mo
0,08
Mn3Ni1Cu
Mn3Ni1MoCu
Ni
Cr
Mo
Cu
Other
elements
0,50 to
0,65
0,40 to
0,65
0,15 to
0,30
0,30
0,03
0,25
0,015
0,018
1,20 to
1,60
0,20 to
0,40
0,20 to
0,30
0,35
0,05 to
0,13
0,25
1,30 to
1,90
0,015
0,018
0,80 to
1,30
0,15
0,25 to
0,65
0,30
0,03
0,25
0,20 to
0,60
1,30 to
1,80
0,015
0,018
1,40 to
2,10
0,15
0,25 to
0,55
0,30
0,03
0,25
0,12
0,20 to
0,60
1,20 to
1,80
0,015
0,018
0,80 to
1,25
0,15
0,20
0,30 to
0,65
0,03
0,25
0,12
0,20 to
0,60
1,20 to
1,80
0,015
0,018
0,80 to
1,25
0,15
0,20 to
0,55
0,30 to
0,65
0,03
0,25
Mn3Ni2,5CrMo
0,12
0,40 to
0,70
1,30 to
1,80
0,015
0,018
2,30 to
2,80
0,20 to
0,60
0,30 to
0,65
0,30
0,03
0,25
Mn4Ni1Mo
0,12
0,50 to
0,80
1,60 to
2,10
0,015
0,018
0,80 to
1,25
0,15
0,20 to
0,55
0,30
0,03
0,25
Mn4Ni2Mo
0,12
0,25 to
0,60
1,60 to
2,10
0,015
0,018
2,00 to
2,60
0,15
0,30 to
0,65
0,30
0,03
0,25
Mn4Ni1,5CrMo
0,12
0,50 to
0,80
1,60 to
2,10
0,015
0,018
1,30 to
1,90
0,15 to
0,40
0,30 to
0,65
0,30
0,03
0,25
Mn4Ni2CrMo
0,12
0,60 to
0,90
1,60 to
2,10
0,015
0,018
1,80 to
2,30
0,20 to
0,45
0,45 to
0,70
0,30
0,03
0,25
0,13
0,50 to
0,80
1,60 to
2,10
0,018
2,30 to
2,80
0,20 to
0,60
0,30 to
0,65
0,30
0,03
0,25
Mn3NiCrMo
Mn4Ni2,5CrMo
0,015
0,015
If not specified:: Ti < 0,10%; Zr < 0,10%; Al < 0,12 %. Copper from steel and copper from coating shall not exceed the stated
value .
b
d.o.o.
Table 3
Symbol
Z
a,b
or 27 J (C)
No requirements
-30
+20
-40
-50
-20
-60
A or Y
Three values must reach average impact energy of 47J, only one of them min 32J .
Among five values the highest and the lowest values arent taken be in account; the average of other thee must be
27 J, only one them can be min 20J. .
Table 4
Symbol
Shielded gas
M
A
C
G
d.o.o.
EXAMPLE 1:
ISO 16834-B G 69A 6 M N2M3T
G:
69A:
6:
M:
N2M3T:
ISO 16834-B:
EXAMPLE 2:
ISO 16834-B W 62P 6 N2M3
W:
62P:
6:
N2M3:
ISO 16834-B:
Table 1
Symbol
G
W
Table 4
Symbol
Shielded gas
M
A
C
G
d.o.o.
Table 2
Symbol
Minimum yield
b
strength
Tensile
strength
490
530
600
680
680
745
590 to 790
620 to 820
690 to 890
760 to 960
780 to 980
830 to 1030
MPa
59X
62X
69X
76X
78X
83X
Minimum
c
elongation
%
16
15
14
13
13
12
MPa
Table 3
Symbol
Z
or 27 J (C)
No requirements
-50
+20
-60
-70
-20
-80
-30
-90
-40
10
-100
A or Y
a,b
Three values must reach average impact energy of 47J, only one of them min 32J .
Among five values the highest and the lowest values arent taken be in account; the average of other thee must be
27 J, only one them can be min 20J. .
Si
Mn
Ni
Cr
Mo
Cu
Ti
0,12
0,30 to
0,70
0,60 to
1,40
0,025
0,025
0,40 to
0,65
0,50
3M1
0,05 to
0,15
0,40 to
1,00
1,40 to
2,10
0,025
0,025
0,10 to
0,45
0,50
3M1T
0,12
0,40 to
1,00
1,40 to
2,10
0,025
0,025
0,10 to
0,45
0,50
0,02 to
0,30
3M3
0,12
0,60 to
0,90
1,10 to
1,60
0,025
0,025
0,40 to
0,65
0,50
3M31
0,12
0,30 to
0,90
1,00 to
1,85
0,025
0,025
0,40 to
0,65
0,50
3M3T
0,12
0,40 to
1,00
1,00 to
1,85
0,025
0,025
0,40 to
0,65
0,50
0,02 to
0,30
d.o.o.
Table 5 (continued)
Symbol
Si
Mn
Ni
Cr
Mo
Cu
Ti
0,025
0,025
0,40 to
0,65
0,50
4M3
0,12
0,30
1,50 to
2,00
4M31
0,05 to
0,15
0,50 to
0,80
1,60 to
2,10
0,025
0,025
0,40 to
0,65
0,40
4M3T
0,12
0,50 to
0,80
1,60 to
2,20
0,025
0,025
0,40 to
0,65
0,50
0,02 to
0,30
N1M2T
0,12
0,60 to
1,00
1,70 to
2,30
0,025
0,025
0,40 to
0,80
0,20 to
0,60
0,50
0,02 to
0,30
N1M3
0,12
0,20 to
0,80
1,00 to
1,80
0,025
0,025
0,30 to
0,90
0,40 to
0,65
0,50
N2M1T
0,12
0,30 to
0,80
1,10 to
1,90
0,025
0,025
0,80 to
1,60
0,10 to
0,45
0,50
0,02 to
0,30
N2M2T
0,05 to
0,15
0,30 to
0,90
1,00 to
1,80
0,025
0,025
0,70 to
1,20
0,20 to
0,60
0,50
0,02 to
0,30
N2M3
0,12
0,30
1,10 to
1,60
0,025
0,025
0,80 to
1,20
0,40 to
0,65
0,50
N2M3T
0,05 to
0,15
0,30 to
0,90
1,40 to
2,10
0,025
0,025
0,70 to
1,20
0,40 to
0,65
0,50
0,02 to
0,30
N2M4T
0,12
0,50 to
1,00
1,70 to
2,30
0,025
0,025
0,80 to
1,30
0,55 to
0,85
0,50
0,02 to
0,30
N3M2 c
0,08
0,20 to
0,55
1,25 to
1,80
0,010
0,010
1,40 to
2,10
0,30
0,25 to
0,55
0,25
0,10
N4M2d
0,09
0,20 to
0,55
1,25 to
1,80
0,010
0,010
1,40 to
2,10
0,30
0,25 to
0,55
0,25
0,10
N4M3T
0,12
0,45 to
0,90
1,40 to
1,90
0,025
0,025
1,50 to
2,10
0,40 to
0,65
0,50
0,01 to
0,30
N4M4T
0,12
0,40 to
0,90
1,60 to
2,10
0,025
0,025
1,90 to
2,50
0,40 to
0,90
0,50
0,02 to
0,30
N5M3 e
0,10
0,25 to
0,60
1,40 to
1,80
0,010
0,010
2,00 to
2,80
0,60
0,35 to
0,56
0,25
0,10
N5M3T
0,12
0,40 to
0,90
1,40 to
2,00
0,025
0,025
2,40 to
3,10
0,40 to
0,70
0,50
0,02 to
0,30
N7M4T
0,12
0,30 to
0,70
1,30 to
1,70
0,025
0,025
3,20 to
3,80
0,30
0,60 to
0,90
0,50
0,02 to
0,30
C1M1T
0,02 to
0,15
0,50 to
0,90
1,10 to
1,60
0,025
0,025
0,30 to
0,60
0,10 to
0,45
0,40
0,02 to
0,30
N3C1M4T
0,12
0,35 to
0,75
1,25 to
1,70
0,025
0,025
1,30 to
1,80
0,30 to
0,60
0,50 to
0,75
0,50
0,02 to
0,30
N4CM2T
0,12
0,20 to
0,60
1,30 to
1,80
0,025
0,025
1,50 to
2,10
0,20 to
0,50
0,30 to
0,60
0,50
0,02 to
0,30
N4CM21T
0,12
0,20 to
0,70
1,10 to
1,70
0,025
0,025
1,80 to
2,30
0,05 to
0,35
0,25 to
0,60
0,50
0,02 to
0,30
N4CM22T
0,12
0,65 to
0,95
1,90 to
2,40
0,025
0,025
2,00 to
2,30
0,10 to
0,30
0,35 to
0,55
0,50
0,02 to
0,30
d.o.o.
Table 5 (continued)
Symbol
Si
Mn
0,12
0,20 to
0,70
1,10 to
1,70
N5C1M3T
0,12
0,40 to
0,90
1,40 to
2,00
N6CM2T
0,12
0,30 to
0,60
N6C1M4
0,12
N6C2M2T
N6C2M4
N5CM3T
N6CM3T
Ni
Cr
Mo
Cu
Ti
0,025
2,40 to
2,90
0,05 to
0,35
0,35 to
0,70
0,50
0,02 to
0,30
0,025
0,025
2,40 to
3,00
0,40 to
0,60
0,40 to
0,70
0,50
0,02 to
0,30
1,50 to
1,80
0,025
0,025
2,80 to
3,00
0,05 to
0,30
0,25 to
0,50
0,50
0,02 to
0,30
0,25
0,90 to
1,40
0,025
0,025
2,65 to
3,15
0,20 to
0,50
0,55 to
0,85
0,50
0,12
0,20 to
0,50
1,50 to
1,90
0,025
0,025
2,50 to
3,10
0,70 to
1,00
0,30 to
0,60
0,50
0,02 to
0,30
0,12
0,40 to
0,60
1,80 to
2,00
0,025
0,025
2,80 to
3,00
1,00 to
1,20
0,50 to
0,80
0,50
0,04
0,12
0,30 to
0,70
1,20 to
1,50
0,025
2,70 to
3,30
0,10 to
0,35
0,40 to
0,65
0,50
0,02 to
0,30
0,025
0,025
The total of all other non-listed elements (except Fe) shall not exceed 0,50 %.
V 0,05; Zr 0,10;
V 0,04; Zr 0,10;
V 0,03; Zr 0,10;
AL 0,10
AL 0,10
AL 0,10
d.o.o.
EXAMPLE:
ISO 636A W 46 3 W3Si1
W:
46
G3Si1:
ISO 636-A:
Table 1
Symbol
Minimum yield
a
strength
Tensile
strength
35
38
42
46
50
355
380
420
460
500
440 to 570
470 to 600
500 to 640
530 to 680
560 to 720
MPa
MPa
Minimum
b
elongation
%
22
20
20
20
18
For yield strength the yield, ReL, is used when yielding occurs, otherwise the 0,2 % proof
strength, Rp0,2, is used.
b
Gauge length is equal to five times the test specimen diameter.
Table 2
Symbol
Z
a,b
or 27 J (C)
No requirements
-50
+20
-60
-70
-20
-80
-30
-90
-40
10
-100
A or Y
Three specimen must reach average impact energy of 47J, only one of them min 32J .
Among five specimen the highest and the lowest values arent taken be in account; the average of other thee must be
27 J, only one them can be min 20J. .
d.o.o.
symbol
C
Si
Mn
Ni
Cr
Mo
Al
Ti+Zr
W0
W2Si
0,06 to
0,14
0,50 to 0,90 to
0,80
1,30
0,025
0,025
0,15
0,15
0,15
0,03
0,02
0,15
W3Si1
0,06 to
0,14
0,70 to 1,30 to
1,00
1,60
0,025
0,025
0,15
0,15
0,15
0,03
0,02
0,15
W4Si1
0,06 to
0,14
0,80 to 1,60 to
1,20
1,90
0,025
0,025
0,15
0,15
0,15
0,03
0,02
0,15
W2Ti
0,04 to
0,14
0,40 to 0,90 to
0,80
1,40
0,025
0,025
0,15
0,15
0,15
0,03
W3Ni1
0,06 to
0,14
0,50 to 1,00 to
0,90
1,60
0,020
0,020
0,80 to
1,50
0,15
0,15
0,03
0,02
0,15
W2Ni2
0,06 to
0,14
0,40 to 0,80 to
0,80
1,40
0,020
0,020
2,10 to
2,70
0,15
0,15
0,03
0,02
0,15
W2Mo
0,08 to
0,12
0,30 to 0,90 to
0,70
1,30
0,020
0,020
0,15
0,15
0,40 to
0,60
0,03
0,02
0,15
0,05 to 0,05 to
0,20
0,25
The results shall be rounded to the same number of significant figures as in the specified value using the rule A in
accordance with Annex B of ISO 31-0:1992.
d.o.o.
EXAMPLE:
ISO 636B W 55A 6 W3
W:
55A:
6:
W3:
ISO 636-B:
Table 1
Symbol
a
b
c
43X
49X
55X
57X
Symbol
Z
330
390
460
490
430 to 600
490 to 670
550 to 740
570 to 770
MPa
Minimum
c
elongation
%
20
18
17
17
MPa
-50
+20
-60
-70
-20
-80
-30
-90
-40
10
-100
A or Y
Tensile
strength
Table 2
Minimum yield
b
strength
d.o.o.
Si
Mn
W0
Ni
Cr
Mo
Cu
Al
Ti+Zr
W2
0,07
0,40 to
0,70
0,90 to
0,025
1,40
0,035
0,50
0,05 to
0,15
W3
0,06 to
0,15
0,45 to
0,75
0,90 to
0,025
1,40
0,035
0,50
W4
0,07 to
0,15
0,65 to
0,85
1,00 to
0,025
1,50
0,035
0,50
W6
0,06 to
0,15
0,80 to
1,15
1,40 to
0,025
1,85
0,035
0,50
W12
0,02 to
0,15
0,55 to
0,10
1,25 to
0,030
1,90
0,030
0,50
W16
0,02 to
0,15
0,40 to
1,00
0,90 to
0,030
1,60
0,030
0,50
W1M3
0,12
0,30 to
0,70
0,35
W2M3
0,12
W2M31
0,025
0,025
0,020
0,40 to
0,65
0,30 to
0,70
0,60 to
0,025
1,40
0,025
0,40 to
0,65
0,50
0,12
0,30 to
0,90
0,80 to
0,025
1,50
0,025
0,40 to
0,65
0,50
W2M32
0,05
0,30 to
0,90
0,80 to
0,025
1,40
0,025
0,40 to
0,65
0,50
W3M1T
0,12
0,40 to
1,00
1,40 to
0,025
2,10
0,025
0,10 to
0,45
0,50
W3M3
0,12
0,60 to
0,90
1,10 to
0,025
1,60
0,025
0,40 to
0,65
0,50
W4M3
0,12
0,30
1,50 to
0,025
2,00
0,025
0,40 to
0,65
0,50
W4M31
0,05 to
0,15
0,50 to
0,80
1,60 to
0,025
2,10
0,025
0,40 to
0,65
0,50
W4M3T
0,12
0,50 to
0,80
1,60 to
0,025
2,20
0,025
0,40 to
0,65
0,50
WN1
0,12
0,20 to
0,50
0,025
0,60 to
1,00
0,35
0,35
WN2
0,12
0,40 to
0,80
0,025
0,025
0,80 to
1,10
0,15
0,35
0,05
0,35
WN3
0,12
0,30 to
0,80
1,20 to
0,025
1,60
0,025
1,50 to
1,90
0,35
0,35
WN5
0,12
0,40 to
0,80
1,25
0,025
0,025
2,00 to
2,75
0,35
WN7
0,12
0,20 to
0,50
1,25
0,025
0,025
3,00 to
3,75
0,35
0,35
1,30
1,25
1,25
0,025
d.o.o.
Si
0,12
0,40 to
0,80
Mn
1,25
1,40
Ni
Cr
Mo
Cu
Al
Ti+Zr
0,025
3,00 to
3,75
0,35
0,025
0,025
4,00 to
4,75
0,35
0,35
0,030
0,10 to
0,30
0,50 to
0,80
0,20 to
0,60
0,50 to
0,80
0,30 to
0,75
0,20 to
0,60
0,20 to
0,60
0,025
WN9
0,10
0,50
WNCC
0,12
0,60 to
0,90
1,00 to
0,030
1,65
WNCC1
0,12
0,20 to
0,40
0,40 to
0,030
0,70
0,030
0,50 to
0,80
WNCCT
0,12
0,60 to
0,90
1,00 to
0,030
1,65
0,030
0,10 to
0,30
0,50 to
0,80
WNCCT1
0,12
0,50 to
0,80
1,20 to
0,030
1,80
0,030
0,10 to
0,40
0,50 to 0,02 to
0,80
0,30
WNCCT2
0,12
0,50 to
0,90
1,10 to
0,030
1,70
0,030
0,40 to
0,80
0,50 to
0,80
0,20 to
0,60
WN1M2T
0,12
0,60 to
1,00
1,70 to
0,025
2,30
0,025
0,40 to
0,80
0,20 to
0,60
0,50
WN1M3
0,12
0,20 to
0,80
1,10 to
0,025
1,90
0,025
0,30 to
0,90
0,40 to
0,65
0,50
WN2M3
0,12
0,30
1,10 to
0,025
1,60
0,025
0,80 to
1,20
0,40 to
0,65
0,50
The total of all other non-listed elements (except Fe) shall not exceed 0,50 %.
The results shall be rounded to the same number of significant figures as in the specified value using the rule A in accordance with
Annex B of ISO 31-0:1992.
d.o.o.
Guide
to toENEN
14700for for
Fe Fe
base
materials
Guide
14700base
materials
d.o.o.
The values in the brochure are just an orientation matter. They can be changed without
any previous agreement.
d.o.o.
Brinellhardness
HB
Brinellhardness
HB
96
53
96
285
107,0
28,3
285
103
58,2
103
302
109,0
30,5
302
111
64,0
111
321
32,8
321
116
67,0
116
341
35,0
341
121
70,0
121
363
37,4
364
126
72,4
126
388
40,2
393
130
74,8
131
415
43,2
430
137
77,2
137
444
47,0
466
143
79,5
143
478
49,0
510
149
81,7
149
541
52,0
560
156
84,1
156
555
56,0
640
163
85,4
163
600
59,0
695
170
88,2
170
611
59,3
704
179
90,4
179
622
60,5
726
187
92,2
187
632
61,5
750
197
94,2
197
643
62,5
774
207
96,2
207
654
63,5
800
217
97,8
217
665
64,5
826
229
99,6
19,0
229
676
65,5
855
241
101,0
21,2
241
688
67,0
903
255
103,0
23,8
255
694
68,0
940
269
105,0
26,0
269
d.o.o.
STORAGE
Welding materials should principally be kept in their original packing until use.
The withdrawal of materials form stock should be based on the first-in / first-out principle.
In order to protect the welding materials against humidity, induced damage, they should be
stored in a dry place, under climatically controlled conditions of 17-25C and a maximum
relative humidity of 60%.
Recommendable maximum storage time is 3 years in undamaged packing.
RE-DRYING
Electrodes and fluxes need re-dying before use. The re-drying temperature of electrodes
and fluxes are indicated on the labels of the electrode and flux packing and on the technical
specification of the electrode. Wires, FCW and rods do not need re-drying before use.
Electrodes in metal box and vacuum packaging do not need re-drying before use provided
the original package is unbroken. No special storage climate control is necessary for these
types.
Cellulose-coated electrodes must principally not be re-drying.
Electrodes, which exhibit poor arc stability, heavy spatter or difficult slag removal have
probably been damaged by moisture pick-up and normal operability can be restored by redrying.
For all types of electrodes we recommend after re-drying immediately prior to welding. In the
oven should be just 3 layers of electrodes. First-in / first-out use of re-dryed electrodes,
maximum 3 re-drying procedures in total 10 h is advised. Recommended is that basic
coated and high alloyed electrodes and fluxes are during use stored in heating oven at
temperatures between 70 and 120C.
Fluxes should be re-dryed before use for 350C/2h with max. 50mm flux thickness in the
oven. Fluxes for reuse should be kept dry, free of moisture and oil. Slag should be removed
and minimum 1/3 of new flux should be added before use.
PACKING
Coated electrodes are supplied in two types of packing:
cardboard box with shrink plastic wrapping for unalloyed, low and medium alloyed
electrodes,
metal box for high alloyed electrodes and cellulose coated electrodes,
vacuum for special electrodes in agreement with customers.
Weight of the cardboard box is between 4 6 kg and the metal box 3 4,5 kg, which
depends from diameter of electrode. Boxes are packed into cardboard box (4 or 5 units
together).
Fluxes are packed into hermetically sealed bags. Weight is 25 kg per bag.
Wires and rods are packed:
- oxyacetilene-welding and unalloyed TIG rods are packed into 25 kg binding, only
diameter 1,6 mm is packed in cardboard boxes
- high alloyed TIG wires are packed in 5 kg - PVC bags, 5 such packets are put together
in cardboard-package
- welding wire is spooled on various spools type plastic or steel basket, each spool is
packed in polyetilene bag and packed in cardboard box
- welding wire could be delivered in drums (about 250 kg, 350 kg and 500 kg)
- FCW is wounded on plastic or basket spools
- SAW wire is wounded on basket spools (K435) or on D760 spools (about 300 kg).
d.o.o.
PRODUCT
CELEX
CELEX Mn
CELEX Mo
CELEX Ni
CELEX NiMo
CEL Fe
CEL Mo
NEUTRAL
RAPID
JADRAN S
RUTILEN 12
RUTILEN Z
RUTILEN 1000 S
EMONA
RUTILEN 13
RUTILEN X
RUTILEN 2000 S
RUTILEN K
RUTILEN S
E Ti Mo
E Ti MoV
E Ti CrMo
E Ti 2 CrMo
E Ti 5 CrMo
SAVA 130
SAVA 150
SAVA 180
SAVA 200
SAVA GV 130
SAVA GV 160
SAVA 150 B
SAVA 150 AR
EVB 50
EVB 55
EVB 45
EVB 47
EVB S
GALEB 50
EVB K
EVB 60
EVB 65
EVB Ni
EVB CuNi
EVB CuNiCr
EVB NiMo
GALEB 70
EVB 2.5 Ni
EVB 2.5 NiMo
EVB 75
EVB CrNiMo
EVB 80, EVB SP2
EVB 100, EVB 100 extra
REDRYING TEMPERATURES
Temperature /
time
NOT
PERMITTED
100 120 C / 2 h
or
140 C / 1 h
120 140 C / 2 h
or
250 C / 1 h
PRODUCT
EVB Mo
EVB MoV
EVB Mo1Cr
EVB CrMo
EVB CrMoV
EVB 2 CrMo
EVB 5 CrMo
EVB 9 CrMo
EVB 9 CrMoV, EVB 91 CrMoV
INOX R 19/9 Nb
INOX R 19/9 NC
INOX R 19/12/3 Nb
INOX R 19/12/3 NC
INOX R 19/13/4 L
INOX R 22/9/3 LN
INOX R 20/10/3 L
INOX R 25/4 Fe
INOX R 25/14 NC
INOX R 25/14/3 NC
INOX R 25/20
INOX R 20/25 L
INOX R 22/12/3 Fe
INOX R 18/8/6 Fe
INOX R 29/9, INOX R 29/9 Fe
INOX B 19/9Nb
INOX B 19/12/3 Nb
INOX B 25/20
INOX B 18/8/6
INOX B 70/15
INOX R 18/8/6
INOX B 13 Fe
INOX B 13/1 Fe
INOX B 13/4 Fe
INOX B 13/6 Fe
INOX B 17 Fe
INOX B 17 MoFe
100 C / 1h +
300 350 C / 2 h
or
400 C / 1 h
or
250 C / 4 h
UTOP 38
UTOP 55
TOOLDUR
E DUR 250
E DUR 300
E DUR 400
E DUR 500
E DUR 600, E DUR 600 Si
E DUR 60 R
ABRADUR 54
ABRADUR 58
ABRADUR 64, ABRADUR 60
ABRADUR 65
ABRADUR 66
CrWC 600
E Mn14, E Mn14 Cr4
E Mn17 Cr13, E Mn17 Cr10 Nb3
Temperature /
time
100 C / 1h +
300 350 C / 2h
or
400 C / 1 h
or
250 C / 4 h
300 320C/ 2h
T
Temperature
slowly
ovenheat
slowly
ovencooling
20C100C300C
( 1h )
( 1h )
420 C / 2 h
or
350 C / 4 h
380 C / 2 h or
400 C / 1 h
400 C / 1 h
or
250 C / 4h
300 C / 1 - 2 h
or
250 C / 4 h
d.o.o.
PRODUCT
MONEL
SUPER Ni
CAST Ni
CAST NiFe, CAST NiFe B
CAST NiFe10
CAST NiC
CAST Fe
SL 250, SL 9V
EL Cu
REDRYING TEMPERATURES
Temperature /
time
150 C / 2 - 3 h
or
180 C / 1 h
BRON CuSn
BRON CuAl
BRON CuMn
300 C / 1 h
or
200 C / 2 3 h
AR 18.5
AR D1
AR 18.1
350 C / 2 h or
250 C / 4 h or
400 C / 1 h
350 C / 2 h or
250 C / 4 h or
400 C / 1 h
AB 100
AB Cr
ALU 99.5
ALU Mn
ALU 5 Si
ALU 12 Si
PRODUCT
SEKATOR 1
SEKATOR 2 A
SEKATOR 2 B
TERMO
FB TT
FB 12.2
FB 33, FB CrNi
FB 578
CS Cr 6
CS CrNi
CS 350
Temperature /
Time
100-150 C / 12 h
NOT
NECESSARY
350 C / 2 h or
250 C / 4 h or
400 C / 1 h
350 C / 2 h or
250 C / 4 h or
400 C / 1 h
Welding fluxes should be baked before use in shallow trays (less than 15 cm deep) at 350C / 2 h in
an oven with free air circulation.
d.o.o.
WELDING SAFETY
Arc welding is a safe occupation when sufficient measures are taken to protect the welder from
potential hazards. When these measures are overlooked or ignored, however, welders can
encounter such dangers as electric shock, overexposure to arc radiation, fumes and gases, and
fire and explosion; any of which may result in fatal injuries.
Arc welding can be hazardous. Protect yourself and others from possible serious injury or death.
Be sure that all installation, operation, maintenance and repair procedures are performed only by
qualified individuals.
Factors
to Consider
Hazard
Electric shock
can kill
Fumes and
gases can be
dangerous
Precaution Summary
Wetness
Welder in or on
workpiece
Confined space
Confined area
Positioning of welder's
head
Lack of general
ventilation
d.o.o.
WELDING SAFETY
Factors
to Consider
Hazard
Welding sparks
can cause fire or
explosion
Containers which
have held
combustibles
Flammable
materials
Metal enclosure
Wetness
Restricted entry
Welder inside or on
workpiece
Confined space
Precaution Summary
d.o.o.
WELDING SAFETY
Factors
to Consider
Hazard
Cluttered area
Indirect work
(welding ground)
connection
Precaution Summary
General work
area hazards
Electrical equipment
Engine-driven
equipment
Gas cylinders
d.o.o.
Hazardous substances in welding and allied processes are respirable air polluting substances
generated by welding, cutting and allied processes, which at an intolerable concentration may be
injurious to health. In the accident prevention regulation Welding, cutting and allied processes (VBG
15), they are expressed by the term substances hazardous to health and are regarded as hazardous
substances (Gefahrstoffen) within the meaning of the hazardous substances ordinance
(Gefahrstoffverordnung - GefStoffV).
Hazardous substances can be classified with respect to their occurrence and effects. They are
generated by welding and allied processes in the form of gasses and/or particles. Particulate substances
are dispersed as minute solid particles in the air. The following fractions are distinguished on the basis of
particle size for all particles present in the air (according to DIN EN 481):
Inhalable fraction (total dust) the fraction of particles which is inhaled through the mouth and
nose into the body (particle sizes up to 100 m)
Respirable fraction (fine dust) the fraction of particles capable of penetrating into the alveoli air sacs (particle size up to 10 m)
Airborne particles generated by welding are very small. In general, they have a diameter of less than 1
m (in most cases less than 0,1 m), are therefore respirable and called welding fume.
In welding, hazardous substances always occur in the form of mixtures of substance. The determination
of these limit values is therefore very complicated. This is why, in practice, specific key components
related to process- and welding material are often use. Limit values for mixtures of substances have to
be determined according to TRGS 403 Assessement of mixtures of substances in the workplace
atmosphere (Bewertung von Stoffgemischen in der Luft am Arbeitsplatz).
Gaseous and particulate substances generated by welding, cutting and allied processes can be
classified according to their effects on different organs of the human body as follows:
lung stressing (inert substances) long-term intake of high concentrations leads to a restricted
lung function which is due to a decrease in the exchange of oxygen, due to dust deposited in the
lung. These dust deposits are generally not pathogenic, they are reversible. This substances are
for example: Fe-oxides, Al-oxides.
toxic (poisonous) substances have a toxic effect on the human body, if a certain dose
(=amount per unit weight of the body) is exceeded. This is a dose-effect-relationship. Slight
poisoning leads to mild health disorders; high concentrations of these substance in the inhaled
air may cause very serious poisoning which results in death. This substances are for example:
CO, NO, NO2, O3, metal-oxides such as Cu, Pb, Zn in form of fume and dust.
carcinogenic (cancer-causing) substances are substances which are known to cause
malignant tumors. The risk of cancer normally depends on a number of factors, e.g. genetic
predisposition, environmental pollution. There is no inevitability about the effect but the risk of
cancer is greater as the dose increases. The latent period may last for years or decades. This
substances are for example: Cr VI-compounds, Ni-oxide, Co-oxide, Cd-oxide, Be-oxide,
formaldehyde.
Hazardous substances generated by welding and allied processes arise from: filler materials, parent
materials, shielding gases, coatings, contamination, ambient air, and at high temperature (of the arc or
flame) by physical and/or chemical processes such as: evaporation, condensation, oxidation,
decomposition, pyrolysis, combustion.
The type and amount of the hazardous substances generated depend on the material and the process.
The chemical composition of the materials used has a direct influence on the chemical composition of
the particulate hazardous substances. The processes in use affect the generation of gaseous hazardous
substances. The amount and kind of hazardous substances are also influenced apart from the
processes and materials used by surface coatings and contamination as well as by the following
factors: current (voltage), type of current (ac/dc), diameter of electrode, type of coating, inclination angle
of the electrode, type of welding.
d.o.o.