Professional Documents
Culture Documents
7745 Alarm Troubleshoot PDF
7745 Alarm Troubleshoot PDF
KeyWord
Whenever a channel is released with a release cause other than a normal one,
the counter of channel failures for the released channel is incremented.
NSN Default Threshold :
TCHFR = TCH failure rate (20 % or 30%)
SCHFR = SDCCH failure rate (80 %)
PRDCFR = length of supervision period (60 min)
CS = channel seizure threshold value (10)
2
Whenever a channel is released with a release cause other than a normal one,
the counter of channel failures for the released channel is incremented.
After a certain observation time and a certain threshold it will reported in the
7745 alarm. It give an indication that theres a failure that need to be
addressed, but overall KPI need to be used as a first priority.
3
SDCCH Failure
03 SDCCH radio failure
04 Source SDCCH radio failure in HO
05 Target SDCCH radio failure in HO
0A Channel state conflict between RRMPRB and ABIPRB
0B Channel type conflict between RRMPRB and ABIPRB
23 SDCCH failure due to a LAPD failure
24 SDCCH failure due to a BTS failure
25 SDCCH failure due to user actions
26 SDCCH failure due to a BCSU reset
27 SDCCH failure due to radio network reconfiguration actions
48 SDCCH activation failure during call set-up
4A Target SDCCH activation failure in HO
4B SDCCH failure due to an Abis interface failure in call set-up
4C Source SDCCH failure due to an Abis interface failure in HO
4D Target SDCCH failure due to an Abis interface failure in HO
4E SDCCH failure due to an A interface failure in call set-up
4F Source SDCCH failure due to an A interface failure in HO
50 Target SDCCH failure due to an A interface failure in HO
KPI Browser
Cell Doctor (report 211 Network Doctor) OSS
Cell KPI (report 204 Network Doctor) OSS
Root Cause
&
Suplementary
information
SD
& TCH
Audit Neighbours
Check TSC
TRX using ZERO command
BCC using ZEQO command
Site Visit
Action
ND 195 : Unbalanced
Uplink & downlink per TRX
ND 196 : Uplink/Downlink Quality
ND 232 : Time
Advanced (from
drive test)
Retune, Check
Parameter ARFCN or
Audit Antenna tilting
Change Request
& Execute
KPI OK
Alarm
End
Investigation
together with PLO
TX 3 , 4 and RX div
Action on site :
1.
2.
3.
10
Sample ND 196
Performance Analysis:
IF: band q5 value is under 90%
THEN: we suspect that the TRX have bad
quality uplink or Downlink ( in this case
downlink issue)
11
Sample ND 195
13
Sample ND 232
this site having overshoot issue
14
15
1.
2.
3.
17
Summary
1. Alarm 7745 occur due to Abnormal release Channel
- Mostly in TCH 53,56,59 because of Handover, Call Setup Issue
- SDCCH 4B because of antenna and feeder installation
2. Module M6HA should be part of BTS High Capacity
3. Correction related alarm 7745 software CX5 CD4 (replace CX4.1 CD4)
4. Many things that can lead to alarm 7745, it can be categorized as below :
Transmission issue, Power Related issue
Environment Related, Air Conditioning, Temperature
BTS HW problem related, Cooling Fan, Module faulty
BTS Antenna Line
Coverage Issue
Configuration Mismatch between BSC and BTS/MMI
Some existing problem in the old SW
Other maintenance activity in the BSC level
18
Additional :
RFI Site Procedure
Objective:
1. To have better site integration verification procedure
2. To make sure that all functionality of the integration site already
in place and being verified
3. To avoid unnecessary mistake on integration such as cross feeder
(partial and full), Loose feeder and others functionalities.
19
20