PROBLEM 6.145
{°° The bone rongeur shown is used in surgical procedures to cut small bones.
Determine the magnitude of the forces exerted on the bone at E when two
100-N forces are applied as shown,
SOLUTION
FBD Handles:
( EMc=0: —aB,+ b (100 N 100 N) =0
B=0
(.2M,=0: (28 mm) B, - (110 mm) (100 N) = 0
B, = 392.86N
(2Mp= 0: (40 mm) (392.86 N) = (30 mm) £ = 0
E=S4Nnedre PROBLEM 6.140
In using the bolt cutter shown, a worker applies two 340 N forces to
= the hanclles. Determine the magnitude of the forces exerted by the
el sme cutter on the bolt.
ie
aN
joa
25mm alow
SOLUTION
FBD Cutter AB: FBD handle BC
FBDI--EF,=0:B,=0 FBD Il: ((2Mc=0: (12.5 mm) B, — (487.5 mm) 340N=0
B,=13260N
‘Then FBD (EM, = 0: (100 mm) By ~ (25 mm).
= 53.04 kNPROBLEM 6.143
Determine the force P which must be applied to the toggle BCD
To maintain equilibrium in the position shown.
SOLUTION
Note o=30 +a
*BD joint B:
210.
TBD joint C:
255.9EM
: P— 2(285,98 N)sin§.711° = 0
P= S09N 7 300°x PROBLEM 6.146
The bone rongeur shown is used in surgical procedures to cut stall
bones, Determine the magnitude of the forces exerted on the bone
at & when two 112 N forces are applied as shown,
fuew
SOLUTION
Note: By symmetry the horizontal components of pin forces at.4 and D
are zero.
FBD handle AB:
~ EF, =0: By
(CEM,=0: 28 mm) B, ~ (110 mm) (112)
By=440N
(440N) — (30 mm) (2) = 0
CEMz=0: (40 mm)
E=5867N4fp
PROBLEM 6.98
For the frame and loading shown, determine the components of all forces
aeting on member ABD.
SOLUTION
FBD Frame:
FBD BF: (I)
wen fale
Le et lee
Ez
(0.625 m) F ~ (0.75 m)(4 kN) ~ (1.25 m)(3 KN) = 0
F,=10.8 KN —
+ EF. =: 4,—10.8 KN = A,= 10.80 KN +4
PER=0: 4,-4KN-3KN=0, Ay= 7.00 KN}
FBD ABD: (11)
DEIN
I: ( EMc=0: (0.375 m)(10.8 KN) - (0.25 m) B,=0, By = 16.2 KN, B,= 16.20 kN-— 4
Ik ( EMp=0: — (0.25 m)(10.8 KN + 16.2 KN) + (0.5 m) B,— (1.00 m)(7.0 kN) = 0,
B,=0.5 KN, B,=500N |<
= EF,=0: 10.8 KN ~ 16.20 KN + D,= 0, Dy = 27 N, D,= 27.0 KN 4
{2F,=0: 70kN-05kN-D,=0, D,= 6.50 kN}