You are on page 1of 1

Solid works 2014

EF
Operating system: Windows 2008
Processor: Intel Core i3 3.10 GHz
Hard disk: 360 GB
RAM: 4 GB
FRGT
Sketch, Trim, Smart dimension, Revolve, Extrude, Extrude cut, Chamfer, Mate, Insert,
Move, etc.
REH
Read the part drawing thoroughly.
Choose proper scale.
Open new solid works document.
Click the part drawing and model the components as per the given dimensions in part
drawing by using above mentioned commands.

You might also like