#RF_Engineer Interview Questions | Drive Test Engineer Interview Questions
Q.1: Please introduce the telecommunication/wireless system configuration.
GSM: MS-BTS-BSC-MSC WCDMA:UE-NODEB-RNC-CN Q.2: Tell us 2G/3G(noun) parameter we often see in the testing ,explain it: GSM: RX Level (Received signal level): -70dbm to -20dbm:good;-70dbm to -80dbm:normal;-80dbm to -90dbm:acceptable; below -90:bad RX Quality (Recieved signal quality): 0 to 4 :good; 4 to 6 normal; up 6 bad; C/I: Carries power / Interface power WCDMA: RSCP: Recieved signal code power -70dbm to -20dbm:good;-70dbm to -80dbm:normal;-80dbm to -90dbm:acceptable; below -90:bad 0 to -6:good;-6 to -10: normal;-10 to -12:acceptance; below -12:bad. Q.3: Introduce the testing for new site. ? On air or not; ? sector swap or not; ? site coverage;inter handover;intra handover; ? GPRS or hsdpa hsupa testing ? video call testing(3G) ? sms,mms testing Q.4: How to estimate the antenna /feeder cross during testing? When we at the service cell coverage the rxlev is other cell s .and the rxlev is w eakly. When we test ,target cell ,the sverce line connect to other cell. Q.5: Please Analysis of Causes of call drop. Poor coverage: Coverage hole, dead zone, isolated island, uplink/downlink unbalance Coverage ov er shooting Signal attenuation. Interference: Internal interference, external interference and the equipment interference ;Str ong downlink/ uplink interference. Parameter setting not proper: Radio link timeout counter, handover, power control etc. Handover failure: Q.6: Please Analysis of Causes of handover failure. ? missing neighbor or neighbor not defined ? parameter for the handover are not good ? Interference Q.7: Introduce the software and test equipment you have used Software: ? TEMS product:TEMS9.1;8.14;8.03; ? Nemo ? Probe1.5,probe1.4;probe1.3; assistant analysis ? Mapinfo:9.0;8.5;7.0; ? actix analysis Test mobile: sonyerrisson: k800i; k790i; z750i; w600; w995 Nokia: 6680; N70; N80 Motorola: V3XX Q.8: Introduce the mapinfo and googlearth. ? Check the site location from google earth or mapinfo ? check the entironment nearby the site and make a plan for the testing from goo gle earth and mapinfo; ? analysis the logfile from mapinfo. Q.9: how can analysis the logfile and make report. ? actix software analysis ? Tems software analsis ? assistant software analysis
Check coverage,quality ,handover and Throughput and so on