You are on page 1of 1

When you push a button an initially extended cylinder will retract and extend five 1.

times then it will return to its original position and wait for five seconds. The process
will be repeated 5 times

2-When you push a button one cylinder extends and stays extended for 5 sec, then a
second cylinder extends. When it reaches the end of its travel, the first cylinder
retracts. This cycle repeats twice with one single push of a button.

A cylinder is initially extended, when a button is pushed the cylinder will retract 3- and then it will extend to half of its travel distance and retract five times then it will
.return to its original position. The process will be repeated five times

When a light is turned on another light will turn on and off 5 times after that a -4
cylinder will extend then a light will turn on and off 3 times, then the cylinder will
.retract and the first light will turn off. The process will be repeated 3 times
Given three double acting cylinders of equal lengths controlled by single solenoid -5
directional control valves with spring return as shown below, two lights and a
momentary push button. Each one of the cylinders has two limit switches to indicate
the initial and final positions. When pushing the start button the first and second
cylinders will extend and retract 2 times, then the first light will turn on for 5 sec, then
the second light will turn on for 5sec. after that, the third and second cylinders will
.extend and retract 3 times. This process will repeat itself 4 times
.Write the ladder diagram that describes the system above

You might also like