HipADA BW sisi
‘WELDING PROCEDURE SPECIFICATION (WPS)
(ASME Section IX)
‘Company Name __HIDADA By Moh brahim
lding Procedure Speciation Number sarSsai Date :__ 15/05/2016 Supporting PQR 051m
Revision No. z
Main Welding Process Saaw Type(s) mawuat
Root Welding Process ‘Taw Type(s) MANUAL
(Cap Welding Process MAW Type(s) manuat
BOINTS (QW - 402)
Loints Design :
[Backing (¥es)_yes (No)
[Backing /Retainer Material
Metal None
INometalie
lother
‘a per etches and Project DW.
‘Nonfusing metal None
aia rinang to clean betweon passes
BASEMETALS (W403)
leno, __s Group No. 1 toPNo 8 Group No. 1
oR
Spectication Type and Grade Any ot Gt
to Specification Type and Grade '5A240 Grade 316L oF Any PB Gr.
OR
‘Chem, Analysis and Mech. Prop. NA
to chem, Analysis and Mech. Prop NIA
Groove: 1.5 mm to 17mm __ Fillet:
Pipe Dia. Range ALL
I iit Impact NA
IMax Pass Thickness SS
rites (Scr. Are) NIA
lother NA
[> FILLER METALS (QW-408)
sTAW
spec. No. (SFA) 39 ea
laws wo (Class) ERSOTT ESET
sno. %
lane. z z
Size of Filer Metals (mm) Zt ZELar
[Deposited Wala Metal
a Toa
a a
WK
‘OF BORIS ESR oF Boner
[Consumable insert NIK. WK
Filer Metal Product for I bare WR
N
Wy
7
WA. W
WR. Ww
limits. are) ILS ILS
lother No-aaditive Ta
* Each base metal filler metal combination should be recorded individually
Approved 6/22/2016; Dennis Niemeyer; DCN 2309; Sour Service - No:
Form No, 00-2-F6
Page 1 of2 Rev. 2.1/03.09.2015
Impact - No‘QW - 482 (BACK)
WpsNo.SAT-Sso1 Rev. 4
POSTTTONS ——(@Ww- 405) POSTWELD HEAT TREATMENT (QW- 407)
Position (s) of Groove
au ‘Temperature Range Nor
‘Welding Progression pnt Time range None
Fillet all ‘others
other None
GAS (QW= FOB)
PREHEAT (QW 406)
recent Composition
Gas (es) Flow rate
Preheat Temp. Min. ao%
Interpass Temp. Max. 379) ‘Shield —_(GTAW)Ar 99.9970 __ N/A so14 ymin
Preheat Maintainance None Trail NIA
Other. None Back None
(PuRcine)
ELECTRICAL CHARACTERISTICS (QW 409)
Current AC or DC / Polarity * SEE TABLE *
"amps (Range) * SEE TABLE*
Vorts (Range) * SEETABLE*
Heat Input max 2.0 10 / mm
‘Tungsten Electrode Size and Type 2.4 mm / Ewth- 296
Mode of Metal Transfer GMAW NIA
Pulsing current power source NA
TECHNIQUE (QW 410)
String or Weave Bead both
Orifice oF Gas Cup Size 4,5,6,8,10
Initial and Interpass Cleaniag (Brushing, Grinding, ete.) Fra of Grease [DWE Rust
hip 8 Wire Brush
Method of Back Gouging None
Oecllation NA
Contact Tube to work Distance NIA
Multipte or single pass (per side) Muti
Multiple or Single Electrodes Single
‘Travel Speed (Range) See Table below
Peening Not Allowed
Closed to Out chamber Na
Electrode spacing NDA
Use of Thermal Processes [Aor qualified P na.
Wald [Process] Fiter Metal Current VaR =V Tavals
layered Toe) eae me | Amp Range |mange Heat tnput Ra
mm Polarity | Range input Range
omy rin
root | craw | 2,24 | ersost | cen | 00-115 | s026 | 56-80 0.968 1.207 Kj/mm
suscaP] saw |25,22 fsoss6a7] ocer | 95-120 | 2208 | 115-270 0975-118 W/m
‘This procedure is only for external attachments or non Sour non Myeroen
#Soh service with a design temperature below 300°C
‘PREPARED BY: "GC MANAGER APPROVAL
< : fe.
“Moh. Ibrahim
Welding Engineer
Fame Ooo +8
Page 20f2 Rev. 2.1/08.09.2015
Approved 6122/2016; Dennis Niemeyer; DCN 2309; Sour Service -No; Impact - No