‘esistance, Capacitance, Voltage And Time Calculator
his caleulator requires the use of Javascript enabled and capable browsers. This calculator is designed to calculate any one
‘alue in the group of Voltage, Capacitance, Resistance, Time of charge, and Instant Voltage. In the schematic rendering, the time
quired for the capacitor to charge to 63.2% of the battery voltage after the switch is closed is the product of the resistance and
‘apacitance T=(R*C). For example, a rather common circuttis in which a 100 UF capacitor and a 100K resistor would require 10
‘econds to charge to 7.6 volts using a 12 volt battery. Our calculator can be used to determine the capacitor voltage at other time
iter the switch in the circuits closed (tured on). Any ofthe five variables can be determined by supplying the other four. For
‘ample, in the calculator defauits, a 1 Farad capacitor charging through a 1 ohm resistor and ‘volt battery will reach about 777
hilivolts in 1.5 seconds. From aft to right, the entries would be 1, 001, 1000000, 1500 with the instantaneous Voltage fia left
‘lank, of Zero. The result should be about 0.777. Only one field should be blank or a 0 value before each calculation. The genera
rmuia for these types of calculations is
fo=V"(1-0Xt/R'C))
\Vhora Ve is the capacitor voltage, V is the supply voltage from battory or other source, R is the rasistance, C is the Capacitance,
+ the time, and e = 2.71828 which is a constant in our calculator
Designation Value
Required Data - Any Four Values
Supply Voltage 92 Volts
Resistance |KOhms
Capacitance | Microfarads
Time | Milliseconds
Instantaneous Voltage || |6 | Volts
| Calculate | | Clear Values