FCT? Oy
a
(a
AIS
AUTOMOTIVE MARINE & INDUSTRIAL
INSTRUMENT CATALOGUEAIS AIS TACHOMETERS |
AIS TACHOMETERS (ALTERNATOR, IGNITION OR MAGNETICALLY SENSED)
Anessential instrumentto monitor engine revolutions and thus maintain the appropriate
revs for maximum engine performance. |
A/2002/Series
Alternator Tachometer for Diesel Engines
Rev. Ranges Part No.12 Volt | Part No. 24 Volt
20 x 100 A/2002/20 12 V_| A/2002/20 24 V
24x100 | A/2o02/2412V | A/2002/24 24 V
| /2002/30 12 V_| A/2002/30 24 V
A/2002/40 12 V_| A/2002/40 24 V
60 x 100 | Av2002/60 12 V | A/2002/60 24 V
AIS
1/2002/Series
Ignition Tachometers for Petrol Engines
Rev. Ranges | PartNo. 12 Volt | Part No. 24 Voit
30 x 100 1/2002/30 12 V_| 1/2002/30 24 V
40 x 100 1/2002/40 12 V_| 1/2002/40 24 V
60 x 100 1/2002/60 12 V_| 1/2002/60 24 V
80 x 100 1/2002/80 12 V_| 1/2002/80 24 V
100 x 100 1/2002/100 12 V | 1/2002/100 24 V
Note: For Tachometer connections, see sensor Installation Instructions page 16
: For Magnetic or proximity sensed tachometers or other rev. ranges, contact A.I.S.
Wiring Diagram
‘Als)
A/2002/30
Not to scale[AIS | {SOIL PRESSURE GAUGES
OIL PRESSURE GAUGES
Engines are designed to operate at a minimum/maximum pressure for safe operation.
The pressure will vary depending on the engine revolutions, but continual low pressure |
could be the sign of a serious problem. AIS oil pressure gauges have been designed
to monitor oil pressure in either the engine or gearbox and to warn the user of any
possible problem, AIS oil pressure gauges can operate on 12 or 24 volt installations.
All AIS oil pressure gauges are supplied with a complete wiring kit, consisting of
terminals, internal lights (red and green) mounting brackets and nuts.
-———— 0 Pressure Gauges —__—
Part No. Range Voltage __Diameter_|
oGis00 | 0-500KPa_| 12/24 Volt | 52mm (2") |
0G/1000 000kPa | 12/24 Volt | 52 mm (2
| 0G/2500 OOKPa | 12/24 Volt | S2mim(2") | |
Standard AIS Wiring Kit Part No. WK/001
NB: Bullet terminal terminations
Sensors —eor
Nhe | Part No. Range Type Thread
Meaeiees conn [OSIs0071 [~0-500KPa [7 Pole | 1/6"-27NPTF |
08/1000/1 | 0-1000KPa | 1Pole _ 1/8"-27NPTF |
| 0S/2500/1 0-2500kPa 1 Pole 1/8"-27NPTF |
: | |
| ————— Sensors ——_____. |
|_PartNo.___Range__Type__ Thread
[os/s00/2 | 0-500kPa_| 2Pole | 1/8°-27NPTF |
L = __| [osnoooe O0KPa | _2Pole | 1/8"-27NPTF
[osvs002 | 0-2500KPa | 2Pole _ 1/8"-27NPTF| |
senson|
TGI20 Terperatura gauge $0 120009
TS Jorperatr gage 8 200 009
0), Ouressie gauge 02 800 KPA
OG1000 Gi ressure gauge Ot 1000 KPA
{O6:2500 Oi Pressure gauge 02500 KPAAIS ns tenpenarune causes,
AIS TEMPERATURE GAUGES
Extremes of heat and cold in water or air cooled engines can be detrimental to the
engine. Overheating can cause serious trouble so monitoring of the engine
temperature is essential for proper care. AIS Temperature Gauges have been de-
signed to monitor engine temperatures, to ensure the correct running temperature and
thus avoid costly breakdowns.
Engine Temperatures Gauges
Part No. Range Voltage | Diameter
TG/120 40-120°C 12/24 Volt 52mm(2")
TG/200 60-200°C 42/24 Volt | __ 52mm (2")
Standard AIS Wiring Kit Part No. WK/001
NB: Bullet terminal terminations
TG/120
Not to scale ee Sensors
Actual size 52mm PartNo. | Range Type Thread
Ts/120/1 | _40-120°C 1 Pole _| 1/8" 27 NPTF
| TS/200/1 | 60-200°C 1 Pole M10 x 1.5
Sensors
PartNo. | Range Type Thread
Ts/120/2 | 40-120°C 2 Pole M16 x 1.5
Ts/200/2 | 60-200°C 2 Pole M16x1.5
Wiring DiagramAIS AIS VOLTMETERS
AIS VOLTMETERS.
AIS Voltmeters have been designed to monitor the voltage output and will assist in
detecting battery deterioration
Voltmeter
Part No.| Range | Diameter
[vita [10-16 Volt |
vai2a [20-32 Voit | 52mm
Standard AIS Wiring Kit Part No. WK/001
N.B, Bullet terminal terminations.
Wiring DiagramAIS AIS HOUR METERS |
AIS HOUR METERS
Hour meters are essential for stationary engine applications. They provide an accurate
record forallperiodic servicing, such as oil changes and other overhaul. AIS hourmeters
indicate 1/10 hours and a maximum count of 9999 hours
Hour Meters
Part No Rar Voltage
HM/001 1/10hr 10 9999hr 12
Standard AIS Wiring Kit N.B. Spade Terminals
| } Ten Wiring Diagram
|
Hour Meter
Not to scale