Professional Documents
Culture Documents
Introduction
LS NAV Service for KDS is the glue between LS NAV Hospitality and the Kitchen
Display System (KDS); it is designed to monitor orders to send to the KDS for
processing as well to provide feedback for order statuses.
This guide describes the install and configuration process of LS NAV Service for KDS,
which consists of Navision Application Server (NAS) and LS NAV KDS Client. LS NAV
Hospitality for Hard Rock India and the Kitchen Display System (KDS) is required
beforehand.
Copyright 2013, LS Retail ehf. All rights reserved. All trademarks belong to their
respective holders
When the NAS has been installed, one can configure a NAS instance with the
Application Server Manager for Microsoft Dynamics NAV snap-in (available through
the start menu). The figure below depicts example configuration:
Dynamics NAV connection information must be filled appropriately as well set the
Start-Up Parameter field to KDS for desired behavior.
As stated before, the NAS is run as a Windows service which might need additional
configuration. In the Service window (Control Panel\All Control Panel
Items\Administrative Tools\Services) make the following changes:
For increased robustness, select Restart the Service for First failure field.
3 Configuration
The connection to the Kitchen Service is configured in the KDS NAS Setup form
(available under LS Hospitality->Kitchen Display System->Setup->NAS Setup in
Dynamics NAV navigation pane).
The parameters are described in more details in the KDS NAV User Guide, default
values are used if none are specified.
4 Troubleshooting
One can enable Debug Logging in the KDS NAS Setup which can be viewed with the
KDS NAS Log (open from Object Designer). Overview of orders sent can be seen with
the KDS NAS Order Overview form and errors.