Professional Documents
Culture Documents
Carburator
Carburator
Contents
Modeling of Carburetor ................................................................................................................................ 2
Lower Casting ............................................................................................................................................ 3
Upper Casting............................................................................................................................................ 5
Top ............................................................................................................................................................ 8
Cap ............................................................................................................................................................ 9
2
Modeling of Carburetor
Carburetor is an essential part of engine combustion system and use to fed the air fuel mixture
to the combustion chamber.
In this report we are modeling the Carburetor 70cc MotorCycle.
3
Lower Casting
1. Create the 3D model from lower casting draft file.
2. Protrude the Front View.
7. Protrude and round the top Section of Front and Side View.
5
Upper Casting
1. Protrude the base of upper casting from the Front View of Lower Casting.
5. Use protrude to extrude the throttle Valve Section and add threads to the protrusion.
8. Use revolve cutout to hollow the venture section of the upper Casting.
Top
1. Revolve Protrude the Base.
3. Perform Cut out in Vertical column and Extrude the lower Section.
9
Cap
1. Revolve protrude the base section.
Assembling
1. Use Planer align relation to mate the basses of upper and lower casting.
2. Use axial Align relation to axially align the holes in bases.
3. Use axial alignment to align the Cap and top with throttle section of upper casting.
4. Use mate relation to join the cap and top and throttle section.