through BGP,the routing updates through RIP are going to come into the PE through the interface assigned to the VRF and through the instance. We have to create a separate address family within RIP just for that VRF.As routes come in to the routing protocol for that VRF,they are automatically going to be put in the routing table for that VRF. We have to manually redistribute the routes from RIP routing table for that VRF into the address family for BGP for that VRF.once we do that,then the routes will automatically make it into the vpnv4 BGP. Once the routes are shared with the other PE router,then in other PE router we have to manually redistribute from BGP into CE to make the routes for the CE in the other PE router side. While redistributing rip into BGP,the metric is going to be MED.