Professional Documents
Culture Documents
Qusn
Qusn
equal to zero
any value042990533
4 days
10 days
6 days
8 day
120
150
180
0.19
0.38
0.5
0.76
5-A company orders 2250 units every 1.5 month. The cost of
one setup is Rs 500. The holding cost is Rs 0.15 per unit per
month and the shortage cost of one unit is Rs 20 per year.
Percentage saving in total annual cost by ordering EOQ will be
___________.
10.51
5-A firm marketing a product has four sales men S1, S2, S3 and
S4 and C1, C2 and C3 are the three customers. The probability of
making a sale to a customer by each salesman is given in the
table below:
1156
9.5(9.45 -9.55)
7.24
8.24
9.24
10.24
0.072(0.065 - 0.078)
404.96(404 - 406)
17, 51
18, 54
19, 57
20, 60
2.95 cm
1.55 cm
1.95 cm
2.45 cm
-m
zero
11 days
13 days
16 days
23 days
300
0
700
900
200 units
1834.6 kJ
1638.6 kJ
1384.6 kJ
1483.6 kJ
drag coefficient
equivalent length of a straight pipe
shape factor
roughness facto
23-A pump draws oil (specific gravity 0.8) from a storage tank
and discharges it to an overhead tank. The mechanical energy
delivered by the pump to the fluid is 50 J/kg. The velocities at
the suction and the discharge points of the pump are 1 m/s and
7 m/s, respectively. Neglecting friction losses and assuming
kinetic energy correction factor to be unity, the pressure
developed by the pump (in kN/m2)
19.2
20.8
40
80
2.3 m
5.3 m
6.3 m
8.3 m
25-A centrifugal pump delivers a manometric head of 12 m
when pumping a liquid of relative density 0.8. If all other factors
remain the same but the liquid has a relative density of 1.2, the
new manometric head would be ___________m. 8
13
757.34 kPa
650 kPa
1000 kPa
1200 kPa
Wood-ruff key
Feather key
54.57%
31.36%
52.16%
29.19%
154.5
33-An imaginary engine having thermal efficiency 70 percent,
receives heat and does work on a slowly moving piston at such
rates that the cycle of operation of 1 kg of working fluid can be
represented as a circle on a pV diagram where 1 cm = 200 kPa
and 1 cm = 0.2 m3/kg. The heat rejected by the engine in the
cycle is 1200 kJ/kg. What is the diameter of the circle on pV
diagram?
8.24 cm
7.14 cm
9.44 cm
10.74 cm
0.461 kJ/kgK
0.461 J/kgK
0.5181 kJ/kgK
0.461 J/kgK
The cam rotates at 120 rpm and has a least radius of 20 mm.
The maximum acceleration of follower during lift will be
__________ m/s2. 2.37
1320.75 Nm
3641.5 Nm
2641.5 Nm
5251.2 Nm