FIELD REPLACEABLE UNIT DOCUMENTATION
Satellite’
2510CDS
BATTERY PACK REMOVAL OPTIONAL PCMCIA CARD REMOVAL
Battery release
lever
Eject button
Po card
1. Turn the computer upside down as shown
2. Slide the battery release lever in the directionof the
arrow
3. Pull the battery pack slightly forward and lift 1. Pull out the eject button of the PC card to be removed.
it out, 2. Pressthe eject button and remove the PC card.
KEYBOARD REMOVAL Od an KEYBOARD REMOVAL
_KEYBOARD REMOVAL a _KEYBOARD REMOVAL |
Keyboard metal brace Mx black screw
Keyboard holder
3. Remove one MSx4 black screwand lift out the
1. Openthe display panel
keyboard metal brace.
2.Unlatch the Keyboard holder at the five points
TOSHIBA
Tough Enough for Todays Word.FIELD REPLACEABLE UNIT DOCUMENTATION
Satellite
2510CDS
KEYBOARD REMOVAL EXPANSION MEMORY REMOVAL
M28 black
screws
a é
Keyboard! cable
Memory
cover
Memory
module
Keyboard c
M2.5xG black. screw ematy diva
4. Lit out the Keyboard and lay t on the palm rest cover: 1. Turn the computer upside down
Be careful not fa apply pressure on the keyboard cable 2. Remove two. MBXG black screws and remove the
5, Remove one MD.Sx6 black serew and lit oUt the plastic memory cover
cover between the speakers. 3. Push the memory clips outward and pull the mernory
6. Disconnect the Keyboard cable tom P11 on the module out ofthe connector on a 48 degree angle
system board! and remove the Keyboard.
HDD REMOVAL
HDD sbot cover HOD bracket handle
4. Tum the computer upside down. 3. Remove one M2.5x4 black screw secuting the HDD
2. Remove one M2.5x6 black screw securing HDD. 4. Graspthe HDD Inacket handle and pull to disconnect
slot cover and pull out the caver the HDD.
TOSHIBA
Tough Enough for Todays Word.FIELD REPLACEABLE UNIT DOCUMENTATION
Satellite”
2510CDS
TOP COVER REMOVAL
2.5K6 black screws
2.5x6 black
screw
M2320 black
screw
25x black sorews
M216 black screw
1. Turn the computer upside down and remave the following
thirteen screws:
- 41N2.5x20 black screws
~ 3 NB.5x6 black screws (one fromHDD slot cover)
- 5 N@.5x4 black ecrewe from battery alot and baek of
of the computer
-1N@x16 black screws
Top cover
Volume control
Display assembly
5. Lift up the back and left side of the top cover about 4 cm
to release the lett latch on the front (arrow! and 2). Pushto
the right (arow3) to clear the valume control from the top
cover.
6. Rotate the top cover and display assembly forvverc!to
release the right latch.
M2.5:00 black screws FL cable PuS
LOD cable
Pus
Right
speaker
cable
Pu3o4
Pu303
Let
speaker
cable
M2.Sx4 black — Membrane
sew switch cable
2. Tum the computer tight side up and open the
display panel
3. Remove two M2.5x20 black serewsanc
one M2.5x4 black screw securing the top cover.
4. Discennect the flowing 4 ve cables
- LED cablefromP J4
-FLeablefromP.J6
- Membrane switch cable fromP 40
- Left speaker cable from PJ303
- Right speaker eablefromPJ304
TOSHIBA
Tough Enough for Todays Word.FIELD REPLACEABLE UNIT DOCUMENTATION
Satel
™
2510CDS
HDD AND BATTERY BOARD REMOVAL
Battery power
line cable
2.536 brass
screw
Pures
HDD cable
Pu7so = PUTS4 Sensor cable
1. Discomect the following cables from the
HDD battery board:
‘HDD cable from PJ750
Battery power line cable trom P.J753
Sensor cable from PJT54.
2. Remove one M2.5x6 brass screwand a plastic brace.
3.Lif up the HDD battery board
‘CD-ROM DRIVE REMOVAL
CD-ROM
drive
CD-ROM
exible cable
Pusat M2.Sx4 brass screw
1. Disconnect the CD-ROMMflexible cable from P.J304 on
the system board.
2, Remove one MB.Sx4 brass screw scauling the CD-ROM.
drive.
3, Slide out the CD-ROM drive.
(FDD bracket
connector
FDD REMOVAL
FDD
flexible
cable
M2.5K4
M250 ¢ fp) brass
Brass Screws! screws
FDD
1, Disconnect the FDD flexible cable from P15 on the
system board
2. Remove two M2.5x4 brass screws securing the FDD
and lit the FDD out.
3. Remove four WP.Sx3 brass screws securing the FDD
tothe FDD case.
4, Disconnect the FDD flexible cable from the FDD.
Side brace
PM2x3 silver
Puen
4. Remove two M2x6 brass screws secuiing the
CD-ROM connector assembly.
5. Separate the CD-ROM connector andthe connector
brace from the CD-ROM dive
8. Discomect the CD-ROMflexible cable fom PJ760
on the CD-ROM connector.
7. Remove two MZx3 screws securing the side brace.
TOSHIBA
Tough Enough for Todays Word.FIELD REPLACEABLE UNIT DOCUMENTATION
Satellite’
2510CDS
RTC AND BACKUP BATTERY REMOVAL
RTC battery
RTC battery cable Backup battery cable
1. Qpen the RTC and_backup battery cover.
2. Disconnect the RTC battery cable fiom PJ702 on the
‘sound board.
3. Disconnect the backup battery cable from PJ701 on the
‘sound board.
4,Lift out the RTC and backup battery.
SYSTEM BOARD REMOVAL
M2Sxd brass screws M2.5y6 brass screw
2 Si brass
scene
Insulator
M2.5x4 tat
head sores
Sound cable
Puzo
Backup battery
SENSOR AND SOUND BOARD REMOVAL
Sound
cable
Puro3
Sound
board
M2.5v4 brass screw
1. Disconnect the sound cable rom PJT03 on the sound
hoard.
2. Remove one M2.5x4 brass screw.
3. Lift up the ound board.
1, Remove the insulator and disconnect the sound cable
from PJTO3 on the sound board,
2. Remove the following seven screws securing the
system board and PC card slot cover
- 2.NB.5x4 flat head brass screws
- 4ND.5x4 brass screws.
-1ND.5x6 brass screw
3. Litup the system board on the font end to remave
the PC card slot cover.
4, Disconnect the following cables fom the eystem board
- HDD battery cable fromPJ300
- Battery power cable fromPJ501
- Sound cable from P1302
TOSHIBA
Tough Enough for Todays Word.FIELD REPLACEABLE UNIT DOCUMENTATION
Satellite"
2510CDS
MEMBRANE SWITCH REMOVAL SPEAKERS REMOVAL
2x4 flat head screws
1 Remove two MBx4 brass screws securing the 1, Remove two Maxd flat head screws securing each
membrane switch speaker.
2.Lift up the membrane switch. 2. Remove the tape securing the speaker cables and
lift out the speakers,
‘COOLING FAN REMOVAL
2x4 flat head
silver screws
Tape
Pu
1. Remove the tape covering PM andthe fan cable.
2. Disconnect the fan eable fram P. on the system board
3. Remove two MB.4 flat head silver screws securing the
cooling fan
4, Take out the cooling fan ftom the system board,
TOSHIBA
Tough Enough for Todays Word.