Bisecting
1. Gick Line Hl.
2. Select the Bisecting line type.
Select two lines; Their bisecting line is the line splitting in two equals parts the angle between
these two fines.
4, Select a point as the starting point for the fine. By default it is the intersection of the
bisecting line and the first selected line.
5. Select the support surface onto which the bisecting line is to be projected, if needed.
6. Specify the line's length by defining Start and End values (these values are based onto the
default start and end points of the line).
The corresponding bisecting line, appears.
7. You can choose between two Solutions, using the Next Solution button,
numbered arrows in the geometry.
directly clicking the
r
L pert
et
ne
8. Click OK to create the line.