Professional Documents
Culture Documents
SPECIFIERS MANUAL
JANUARY 2015
Foreword
This manual has been prepared by Potter Interior Systems to assist the architect, builder and installer to specify,
prepare and install aluminium partitioning systems.
It has been written as a working guide for the industry, however it is not intended to replace good trade practice
and experience is essential to obtaining a quality installation. Nor does this manual override specic advice
received from Potter Interior Systems technical services.
While it is not possible to detail every condition that may be encountered, Potter Interior Systems will advise on
any special situations that may occur. Our technical team is available to assist with design for project specic
extrusions to compliment the Potters aluminium system, to allow designers and speciers to introduce a specic
look to larger projects.
Architects and speciers should ensure that the details provided in this manual are followed, and determine to
their own satisfaction that the job is complete to an acceptable standard of trade practice.
Contents
About us
Potter Interior Systems is a leading supplier of materials for the commercial wall and ceiling industries as well as
thermal and acoustic insulation for use in industrial and residential construction.
Established over 45 years ago, We have been closely associated with the commercial building industry,
continually providing a wide range of interior products that have become renown throughout the architectural,
contracting and building industries.
Our Aluminium Partitioning Suite has undergone a complete redesign and now incorporates a host of new and
innovative ideas to assist both design and installation. The aluminium sliding and hinged door systems showcase
fresh design concepts.
Our Acoustic Suite of products has been enhanced by the addition of the AMF range of ceiling panels to
compliment the USG range for which we are Master Distributor, as well as some new insulation products that
have come with the change of ownership.
Our Education Package has contained whiteboards, chalkboards and fabric boards for many years, but again the
AMF range of ceiling panels opens up some exciting acoustic variations in the education market as well. Retrot
acoustic solutions are offered with a combination of these products and our fabric covered acoustic absorber
panels.
Our Health Sector Package now includes a range of ceiling panels for the reduction of pollutants, others with
bactericidal and fungicidal characteristics, as well as a range that is sealed against the release of micro particles
into their surroundings. The Vision range of whiteboards and notice boards have also been used in the health
sector for decades.
Suspended Ceilings remain the cornerstone of the Potter business and the combination of the whole selection of
interior products remains our strength.
CAD users and those operating the Revit platform can now access our major products through our website or
through our association with EBOSS.
Contact information
Wellington
Christchurch
Physical: 3 Vanadium
37 Place,
Kingsley Street, Riccarton
Sydenham
Postal: (same
PO Box as physical)
12244, Beckenham, Christchurch MOORHOUSE AVE
WALTHAM RD
GASSON ST
WORDSWORTH ST
Email: info@potters.co.nz
HAWDON ST
Website: www.potters.co.nz
. BROUGHAM ST
Introduction
Potter Interior Systems new series of partitioning systems incorporates a number of new design elements and is
still interchangeable with existing series.
Potters have consulted with architects, designers, builders and glazing companies and have designed an
aluminium system to suit all design and budget requirements.
A Series 105
A Series 105 provides a central line glazing with numerous congurations and design options offering a complete
partition system for plasterboard and glazing.
A Series 132
A Series 132 provides a central line glazing with numerous congurations and design options offering a complete
partition system for plasterboard and glazing.
General information
1.2.2 Product overview
C Series 45 is used as a commodity system when budget is a factor but can also be designed into the A Series for
a slimmer
C Series look.
45
The system has the following options available:
C Series 45 is used as a commodity system when budget is a factor but can also be designed into the A Series for
a slimmer look.
Standard glazing prole of 45mm wide x 25mm high.
Standard wall size based around 64mm or 92mm steel stud with one layer of plaster board each side.
The system has the following options available:
Can accommodate glass thicknesses between 6mm - 12.38mm max
Door thicknesses between 38mm - 50mm max can be used.
Standard glazing prole of 45mm wide x 25mm high.
Can be xed to standard openings or xed to 105 or 132 series head/sill track.
Standard wall size based around 64mm or 92mm steel stud with one layer of plaster board each side.
Can accommodate glass thicknesses between 6mm - 12.38mm max
DS Series
Door 38 between 38mm - 50mm max can be used.
thicknesses
Can be xed to standard openings or xed to 105 or 132 series head/sill track.
DS Series Doors
DS Series
Designed to 38
t with Potter aluminium systems
Available in 38mm thick doors only
Styles and rails sizes 50mm, 75mm, and 100mm
100mm, 120mm and 150mm
DS Series Doors
13mm
Can accommodate glass thicknesses of 10.38mm thick laminated glass
Designed to t with Potter aluminium systems
Available in 38mm thick doors only
DS Series Sliders
Styles and rails sizes 50mm, 75mm and 100mm
Designed to t with Potter aluminium systems, available in numerous congurations based around the 38mm
Can accommodate glass thicknesses of 10.38mm thick laminated glass
door series.
DS Series
Safety Sliders
glazing maximum area and thickness
Designed
Type
Typeofofglass
to
glass
t with Potter aluminium systems, available
Thickness
Thickness Grade A
in numerous
Grade A Maximum
congurations based
Maximum
area m area m2
around
Systemtype
System type
the 38mm
door series.
Toughened
Toughenedsafety
safetyglass
glass 6mm 6mm 4.0 4.0 75mm
75mm
Toughened
Safety
Toughenedsafety
glazing
safetyglass
maximum
glass area 8mm
and thickness
8mm 6.0 6.0 100mm
100mm
Toughened safety glass
Type of glass 10mm
Thickness Grade A 8.0
Maximum area m 120mmtype
System
Laminated safety glass 6mm 3.0 75mm
Toughened
Toughenedsafety
safetyglass
glass 6mm 12mm 4.0 10.0 120mm
75mm
Laminated safety glass 8mm 5.0 100mm
Laminated safety glass 6mm 3.0 75mm
Toughened safety glass 8mm 6.0 100mm
Laminated safety glass 8mm 5.0 100mm
Laminated safety glass 6mm 3.0 75mm
E Series
Laminated 105
safety glass 10mm 7.0 120mm
Laminated safety glass 8mm 5.0 100mm
Laminated safety glass 12mm 9.0 120mm
E Series 105 provides an edgeline glazing and double glazing design with clean lines to provide a clean look to
E Series
your 105
partition system. E Series 105 gives a standard detail of 105mm x 25mm.
Softline series
Softline Aluminium Ofce Partitioning is a unique system that incorporates new design elements to facilitate
creative oor plans and enable the nished installation to be of the highest standard.
Softline Aluminium Partitioning is designed in New Zealand by Potter Interior Systems in conjunction with
architects, installers and building owners to create a system that allows the design of today to be the ofce of
tomorrow.
As the name suggests, Softline Aluminium Partitioning has a much softer look and feel because of its radiused
corners on all exposed edges. The special feature bars and concave beads that are available for the glazing
sections within Softline give a look that is totally unique and very modern.
The design style offered by these proles allows the appearance of the nished partitioning to look quite different
from the traditional square - looking partitioning aesthetic available from other systems on the market.
T series
The T Series is a collection of aluminium profiles designed to allow a design to integrate cable trunking into partition
walls. Our aluminium cable trunking has been specifically designed for the installation and use of CAT6 cabling. When
installed back-to-back, it can be used to form the base of a 92mm wall - a width that integrates perfectly with other
Potter Interior Systems aluminium systems.
X series
The X Series is a collection of aluminium profiles that Potter Interior Systems has designed specifically for individual
projects.
Potter Interior Systems excel at developing custom aluminium profiles for unique designs. Our innovation in this area
sets us apart from our competitors. If you have a unique design challenge that requires a new take on aluminium
partitioning, contact us to discover how we can best assist you.
Technical services
Technical advice is available from our experienced team in the following ways:
Wellington
Christchurch
Physical: 3 Vanadium
37 Place, Sydenham
Kingsley Street, Riccarton
Postal: (same as physical)
PO Box 12244, Beckenham, Christchurch
Phone: 0800 POTTERS (0800 768837)
(03) 3388763
Fax: (03) 3380680
Email: info@potters.co.nz
Website: www.potters.co.nz
www.eboss.co.nz
The Potters product catalogue is hosted on the Potters and EBOSS websites (www.eboss.co.nz).
CAD details are either individual components or fully assembled details for convenient transfer to speciers
drawings.
The le formats available for download are .DWG, .DXF, .DWF, .PDF and Autodesk Revit .RVT
Specications are also available online with Masterspec branded sections for download.
These can be found at the follow resources:
www.masterspec.co.nz
www.potters.co.nz
www.eboss.co.nz
www.productspec.co.nz
1.4.1 Aluminium
Technical information
A unique combination of properties puts aluminium and its alloys among our most versatile engineering and
construction materials. All alloys are light in weight, yet some have strengths greater than that of structural steel.
The majority of alloys are highly durable under most service conditions No coloured salts are formed to stain
adjacent surfaces or discolour products with which they come in contact, such as fabrics in the textile industry
and solutions in chemical equipment. They have no toxic reaction. Aluminium and most of its alloys have good
electrical and thermal conductivities and high reectivity to both heat and light.
Aluminium and most of its alloys can easily be worked into any form and readily accept a wide variety of surface
nishes.
Aluminiums best known characteristic is perhaps its light weight, having a density of approximately 2.7 x 103
kilograms per cubic metre at 20C as compared with 7.9 x 103 for iron and 8.9 x 103 for copper.
Aluminium is one of the easiest materials to keep in good condition. It has a high natural resistance to corrosive
conditions normally encountered during shipment and storage and a little care will maintain its original
appearance for a long time. The principal things to guard against are conditions that might cause surface
abrasions or water stains.
Suppliers make every effort to pack aluminium so that trafc marks or rub marks do not occur during shipment
and so that it remains dry. All incoming shipments should be inspected promptly, since suppliers generally have a
time limit in which damage claims will be honoured.
Trafc marks may appear as scratches, surface abrasions, or a condition resembling cinders embedded in the
metal. They result from mechanical abrasion and subsequent oxidation of the abraded areas. Their principal
disadvantage lies In their unsightliness and their effect on nishing operations.
Water stain is a supercial condition and the mechanical properties of the metal having such a stain are not
affected. If a shipment of aluminium arrives in a wet condition, it should be thoroughly dried before storing. This
may be done by evaporation in air or by means of dry air currents. When the moisture is removed in this manner
within a short period after the metal becomes wet, no stain will result. If stain has occurred and the moist
condition causing it, is removed, the stain will not develop further. Once safely dry, the metal should not be stored
near such obvious water sources as steam and water pipes and should be kept at a reasonable distance from
open doors and windows.
1.4.2 Aluminium
Cleaning
Aluminium is a proven construction material for buildings, vehicles, appliances and products, both as a framing
and cladding material. In the building industry, it is by far the most common material used for window and door
joinery, curtain walls and shop fronts. It is widely used in every aspect of the transport, leisure, boating and
household appliance industries. Its selection is based on many criteria one being its ease of fabrication to
provide visual appeal and easy maintenance.
Aluminium has a natural beauty and lustre of its own, yet its surface can be treated in various ways to protect
and enhance appearance, which can be maintained with regular, low maintenance attention. The surface
of fabricated aluminium, whether untreated, anodised or coated, can be spoiled by improper care. Here we
briey summarise the methods of maintaining the appearance of aluminium surfaces after installation. Usually
this care is no more than periodic cleaning, similar to window glass. Anodising treatment will substantially
enhance appearance, render the surface more resistant to various forms of attack and facilitate cleaning and
maintenance.
The Architectural Aluminium Fabricators Association of New Zealand has published a guide which deals with all
aspects of the design, use, care and maintenance of aluminium. Here we only briey highlight the cleaning aspect
since it applies to so many users of architectural aluminium products.
Grime which causes deterioration cannot be prevented from settling on exposed surfaces. If cleaned reasonably
frequently then the mildest methods of washing will produce satisfactory results. There are many ways to clean
aluminium, from using plain water to harsh abrasives. The type of cleaning that should be used is governed by
the nish, degree of soiling, and the size, shape and location of the surface to be cleaned. The mildest method
possible should be used, particularly for aluminium which has been anodised.
With anodised aluminium, surface deterioration occurs as a result of grime deposition and contaminated
moisture attack. In coastal environments it is caused by airborne chlorides, in industrial or urban environments
by sulphur compounds. Grime deposits absorb contaminated moisture like a sponge, assisting attack on the
lm, which cannot be restored without removal. Cleaning frequency depends on accessibility and environmental
severity. In rural areas, cleaning may be needed only every six months. In industrial and marine environments,
cleaning is recommended at least every three months, preferably monthly.
The following cleaning materials and procedures are listed in order of mild to harsh.
The mildest treatment should be tried on a small area and if not satisfactory only then should the next be
examined.
1. Plain water
2. Water with mild soap or detergent
3. Solvents, e.g. kerosene, turpentine, white spirit
4. Non-etching chemical cleaner
5. Wax-base polish
6. Abrasive wax
7. Abrasives
1.4.3 Aluminium
Cleaning
After applying the cleaning agents, the surface should be washed down thoroughly and dried with a clean cloth to
prevent streaking. There should be no concentration of the cleaner at the bottom edges of the aluminium. If using
proprietary cleaners, the manufacturers recommendation should be obtained and followed carefully.
If abrasives are used then the appearance of the aluminium nish may be altered. If there is a grain in the nish
then cleaning should always be performed with the grain. If the condition of the surface indicates the use of
abrasive or etching materials, it is advisable to consult a cleaning specialist. If all other methods fail it may be
necessary to resort to heavy-duty cleaning. This involves the use of cleaners containing strong etching chemicals
or coarse abrasives.
Anodising
A current is passed through the cell and oxide is formed in the pores of the aluminium surface.
The anodised aluminium can now be coloured or left in its natural silver.
Continuing the process, the metal is placed in cold water to neutralize any residue from the etch. The metal is
then rinsed again. The anodising process then takes place which is followed by a nal rinse.
The colouring process is next. This is achieved by using an electrochemical process to deposit nickel or tin into the
open pores created by the anodising process.
The pores are then sealed to ensure no airbome contaminants can enter which could cause premature attack of
the newly formed oxide layer. The colour is retained and the metal is then rinsed.
Frost Anodising
Frost Anodised is a unique two-stage treatment that advances the anodising process to provide aluminium
extrusion with a constant lustre nish free of grain.
The nish is unmatched in uniform colour neutrality. The frosted or pearlescent surface nish eliminates nger
marking and is ideal for exterior or interior architectural decorative nishes.
End users include architectural extrusions for interior joinery, balustrading, furniture, appliances, partitioning,
cabinetry, plus other xtures and ttings.
Powder coating
Pre-treatment
In order to obtain good paint adhesion, the aluminium extrusions must rst be pretreated. The eight stages are
rstly, a detergent cleaner to remove oil and smut. This is followed by a rinse then an acid etch. After the etch,
the aluminium is dipped into two consecutive rinse tanks to ush impurities from the aluminium substrate then
immersed in a chromate conversion tank prior to a nal rinse. The extrusions are then placed into a drying oven.
The chromate conversion layer applied to the substrate becomes an integral part of the aluminium and forms a
corrosion resistant layer for the powder to adhere to.
Spraying methods
The main principle of painting is the charging of powder particles.
The powder particles are charged when forced down a Teon tube which is wrapped around the barrel of the
spray gun. By rubbing against this tube the particles of powder gain a positive charge.
Once the charged particles exit the spray gun, they are attracted to the earthed aluminium extrusions and the
powder wraps around the extrusion to give an even, uniform nish.
After spraying, the extrusions are cured at specied temperatures and times in order for the coating to ow out
and cure.
The coated aluminium is then tested in accordance with WANZ ENDUROCOLOUR BS 6-496 and AS 3715
specications by trained inspectors.
Powder coating, with its comprehensive colour range, is very adaptable to the continually changing market
conditions. Several different types of powders are available to suit varying application.
Glass information
For more information on all glass types consult with our partners Viridian or the New Zealand Glass Association
(GANZ)
www.viridianglass.co.nz
www.ganz.co.nz
Glass thickness
Typical to all Potter aluminium systems the glass thickness range the suites can accommodate is
6mm - 12.38mm maximum for laminated glass.
For more information on glass thickness and compliance with the New Zealand Building Code requirements, refer
to the Human Impact Safety Requirements NZS4223:Part 3:1999 found on the GANZ website.
Glass weight
Generally 2mm Glass thickness per m = 5kg, ie 6mm glass = 15kg/m
STC points
Refer to Viridian www.viridianglass.co.nz for testing information
Glass-to-metal contact
Glass should be installed without glass-to-metal contact, as thermal movement created by the different
coefcients of expansion between glass and metal can cause breakage, particularly in annealed and laminated
glass.
Potter aluminium systems provide for backing seals or glazing tapes. Where present these gaskets should be pre-
installed as while some systems can be double wedged, this is a more costly glazing procedure, and not normally
recommended by gasket and wedge suppliers or glass companies.
The following information has been supplied by the Glass Association of New Zealand (GANZ).
Internal partitions are specialised framing systems incorporating a range of inlls such as glass. Most systems
use aluminium extrusions, which can incorporate gaskets, wedges and blocking similar to exterior aluminium
joinery, but without the concerns of weather-tightness. Some have unique features suitable for interior design,
which normally involves supporting the glass under low internal pressures and human impact.
Glass design
Glass design for internal partitions is covered in NZS 4223 Part 3:1999, Clause 311.
This clause denes: area and glass thickness tables for:
Four edge support in both doors and side panels
Four edge support in other areas
Top edge unframed
Side edges unframed or silicone butt jointed up to 3 metres in height.
Manifestation requirements
GANZ members can advise on the effect on glass thickness, type and cost of various framing types and spacing.
Framing
NZS 4223 Part 3:1999 denes containment of glass in 303.2 and requires glass to be installed to meet the edge
cover requirements of table 25 and 27 of Part 1:1985.
For glass to be considered as framed minimum framing rigidity requirements are set out in Appendix 3.C.
NZS 4223:Part 1:2008 provides minimum glazing dimensions and minimum edge cover, the key data is abridged
in Table 1.
Table 1
Glass thickness (mm) Minimum edge cover Minimum edge clearance Total rebate depth (mm)
6 6 4 10
8 8 5 13
10 8 5 13
12 9 6 15
As illustrated in Detail 1 & 2 the glass size cannot be more than the sight size plus the depth of one rebate, less a
glazing clearance of 2mm-4mm (dependant on glass thickness, type, frame straightness and squareness). When
installed this glass is then centred in the frame.
Therefore an 18mm rebate will only allow a maximum edge cover of 7mm or 8mm ( rebate depth minus of
clearance) with the maximum glass thickness derived from Table 1 (Page 1.6.2).
(GJH&OHDUDQFH
1RWH6HFWLRQVKRZQ
6LJKW6L]H
LVDQH[DPSOHIUDPH
RQO\
Detail 2. Shufe Glazing Tolerances
(GJH&OHDUDQFH
1RWH6HFWLRQVKRZQ
6LJKW6L]H
LVDQH[DPSOHIUDPH
RQO\
Note. Edge cover is dened as fully supporting the glass glazing gasket or wedge extending beyond the frame backing
should not be considered as part of the edge cover.
Internal cleated corners can also reduce the pocket depths and make it impossible for the glass to comply with NZS 4223.
NOTE:
(1) Heights above 3.0 m require specic design.
(2) Adequate edge cover is required to retain the glass under load (refer 303.2, and tables 25 & 27 of NZS 4223:Part 1).
(3) Safety glass design is based on a maximum 0.45 kPa ULS pressure.
(4) Refer to 303.4 for a denition of unframed edges.
1.7 Specication
Online resources
Masterspec branded sections for download are available from the following resources. All Potter Interior Systems
aluminium partitions are covered in the relevant section:
www.masterspec.co.nz
www.potters.co.nz
www.eboss.co.nz
EBOSS, the online technical library for the building and construction
industries, designed by design professionals for design professionals. EBOSS
goal is to provides speciers with the information they require, in the format
that best suits their needs.
www.productspec.co.nz
1.8 Sustainability
Potter Interior Systems supply goods from industry leaders in environmental sustainability and awareness.
Below is our current range of goods which are certied by Environmental Choice NZ and Australia.
Review our website for more detailed information on their products and commitment.
www.potters.co.nz
USG is an industry leader of manufacturing interior products with a proud heritage spanning more than 100
years. USG understands the need to safeguard the world around us and protect the vital natural resources we
all share. Long before conservation became a mainstream concern, USG was nding innovative ways to reduce
waste, operate efciently and transform manufacturing byproducts into valuable new resources.
INEX is the leading producer of aluminium extrusions in New Zealand. It has the capacity to produce
in excess of 14,000 tonnes per annum. As a market leader, INEX strives to set new criteria in environmental
management issues and is working to ensure sustainability for aluminium extrusion and its future. INEX is the
only extruder in Australasia to recycle its scrap back to a primary producing smelter to produce aluminium billet.
This recycling process reduces the energy requirement in the manufacturing process without compromising the
high quality requirement of the product.
INEX recognise that sustainability, both economically and environmentally, must be part of a long-term strategic
approach.
Aluminium
Aluminium is the most common metal element in the earths crust accounting for seven percent of its mineral
makeup. The current estimates of reserves of aluminium using todays consumption rate are estimated to be
several hundreds of years of global reserves.
Unlike timber, plastic, ceramics, brous plaster and many other products, aluminium can be recycled indenitely
due to its high intrinsic value. Aluminium is also the most cost-effective metal or material to be recycled thus
reducing landll by 5-8% every year.
Aluminium has been recycled since it was rst commercially produced and today recycled aluminium accounts
for one-third of global consumption worldwide. Recycling is an essential part of the aluminium industry and
makes good sense economically, technically and ecologically. All aluminium products retain value, even at the
end of their useful life, which guarantees that it is possible to continue to create value by recycling them into new
products.
Suite overview
Potter Interior Systems new series of partitioning systems incorporates a number of new design elements and is
still interchangeable with existing series.
Potters have consulted architects, designers, builders and glazing companies and have designed an aluminium
system to suit all design and budget requirements.
A Series 105 provides a central line glazing with numerous congurations and design options offering a complete
partition system for plasterboard and glazing.
Specication
The Masterspec branded section 5211PP POTTER ALUMINIUM INTERNAL PARTITIONS is available for download
from the following resources.
www.masterspec.co.nz
www.potters.co.nz
www.eboss.co.nz
www.productspec.co.nz
PAS011/A
105 FLAT
TERMINATION CAP
PAS014 PAS014/A PAS015
PAS010/R PAS011/D
105 PLASTERBOARD 105 GLAZING 105 MEDIUM POCKET
64mm CAPPING 105 JOINING PLATE
POCKET ADAPTOR CAPPING/FRAME
HEAD/FRAME CAPPING/FRAME
PAS016 PAS017 PAS018 PAS019 PAS020
105 SNAP IN POCKET 105 SNAP IN 105 SNAP IN 105 WIDELINE 105 GLAZING BEAD
DOORSTOP UP TO DOORSTOP UP TO GLAZING SILL
40MM DOORS 50MM DOORS
STAKE/6 STAKE/7
PVC SKIRTIING INFILL UNIVERSAL JAMBSEAL INFILL ACE CAPTIVE GLAZING POST
JAMBSEAL WEDGE SPIGOT
13MM
PLASTERBOARD
LINING
13MM
PLASTERBOARD
LINING
FLOOR LEVEL
PAS010
105 HEAD/SILL
TRACK
PAS009/B
150MM SKIRTING
FLOOR LEVEL
GLAZING PANEL
PAS019 PAS020
105 WIDELINE 105 GLAZING BEAD
GLAZING SILL
FLOOR LEVEL
PAS021/A PAS022
105 GLAZING 105 TRANSOM BEAD
SILL/TRANSOM
PAS019 PAS020
105 WIDELINE 105 GLAZING BEAD
GLAZING SILL
FLOOR LEVEL
PAS020
105 GLAZING BEAD
PAS021
105 GLAZING
SILL/TRANSOM
PAS020
105 GLAZING BEAD
PAS019 PAS020
105 WIDELINE 105 GLAZING BEAD
GLAZING SILL
FLOOR LEVEL
ACE CAPTIVE
WEDGE
PAS019 PAS020
105 WIDELINE 105 GLAZING BEAD
GLAZING SILL
HINGE SUPPORT
FLAT BAR
PAS015 13MM
105 MEDIUM POCKET PLASTERBOARD
CAPPING/FRAME LINING
PAS016
105 SNAP IN POCKET
PAS014
105 PLASTERBOARD
POCKET
CAPPING/FRAME
PAS015 PAS018
105 MEDIUM POCKET 105 SNAP IN
CAPPING/FRAME DOORSTOP UP TO
50MM DOORS
PAS016
105 SNAP IN POCKET
50MM DOOR
PAS017
PAS024
105 SNAP IN
105 CORNER POST
DOORSTOP UP TO
40MM DOORS
PAS023
105 POCKET FLUSH
FILLER
PAS016
40MM DOOR
105 SNAP IN POCKET
PAS016 PAS016
105 SNAP IN POCKET 105 SNAP IN POCKET
PAS023
105 POCKET FLUSH
FILLER
GLAZING PANEL
PAS024 PAS023
105 CORNER POST 105 POCKET FLUSH
FILLER
PAS017
PAS016
105 SNAP IN
105 SNAP IN POCKET
DOORSTOP UP TO
40MM DOORS
40MM DOOR
PAS017
PAS016
105 SNAP IN
105 SNAP IN POCKET
DOORSTOP UP TO
40MM DOORS
40MM DOOR
PAS018
PAS016
105 SNAP IN
105 SNAP IN POCKET
DOORSTOP UP TO
50MM DOORS
50MM DOOR
PAS018
PAS016
105 SNAP IN
105 SNAP IN POCKET
DOORSTOP UP TO
50MM DOORS
50MM DOOR
PAS017
105 SNAP IN
DOORSTOP UP TO
40MM DOORS
PAS014
105 PLASTERBOARD
POCKET
CAPPING/FRAME
PAS017
105 SNAP IN
DOORSTOP UP TO
40MM DOORS
40MM DOOR
13MM
PLASTERBOARD
LINING
PAS018
105 SNAP IN
DOORSTOP UP TO
50MM DOORS
PAS014
105 PLASTERBOARD
POCKET
CAPPING/FRAME
PAS018
105 SNAP IN
DOORSTOP UP TO
50MM DOORS
40MM DOOR
13MM
PLASTERBOARD
LINING
PAS014
105 PLASTERBOARD
POCKET
CAPPING/FRAME
PAS017
105 SNAP IN
DOORSTOP UP TO
40MM DOORS
PAS502
FLAT SLIPPER PLATE
PAS014
13MM
105 PLASTERBOARD
PLASTERBOARD
POCKET
LINING
CAPPING/FRAME
PAS017
105 SNAP IN
DOORSTOP UP TO
40MM DOORS
HINGE SUPPORT
FLAT BAR
PAS502
FLAT SLIPPER PLATE
PAS500
75MM DOOR STILE
PAS014
105 PLASTERBOARD
POCKET
CAPPING/FRAME
PAS017
105 SNAP IN
DOORSTOP UP TO
40MM DOORS
PAS502
FLAT SLIPPER PLATE
PAS014
13MM
105 PLASTERBOARD
PLASTERBOARD
POCKET
LINING
CAPPING/FRAME
PAS017
105 SNAP IN
DOORSTOP UP TO
40MM DOORS
HINGE SUPPORT
FLAT BAR
PAS502
FLAT SLIPPER PLATE
PAS500/100
100MM DOOR STILE
PAS017
PAS503
105 SNAP IN
75MM TOP & BOTTOM
DOORSTOP UP TO
RAIL
40MM DOORS
PAS504
GLAZING BEAD
GLAZING PANEL
PAS504
GLAZING BLOCK GLAZING BEAD
PAS503/100
100MM TOP &
BOTTOM RAIL
PAS503/100 UNIVERSAL
100MM TOP & JAMBSEAL
BOTTOM RAIL
PAS503/100
100MM TOP &
BOTTOM RAIL
PAS RP8SI
FLOOR LEVEL
PAS017 PAS017
105 SNAP IN 105 SNAP IN
DOORSTOP UP TO DOORSTOP UP TO
40MM DOORS 40MM DOORS
PAS503 UNIVERSAL
75MM TOP & BOTTOM JAMBSEAL
RAIL
PAS503
75MM TOP & BOTTOM
RAIL
FLOOR LEVEL
A SERIES 132
Suite overview
Potter Interior Systems new series of partitioning systems incorporates a number of new design elements and is
still interchangeable with existing systems.
Potters have consulted architects, designers, builders and glazing companies and have designed an aluminium
system to suit all design and budget requirements.
A Series 132 provides a central line glazing with numerous congurations and design options offering a complete
partition system for plasterboard and glazing.
Specication
The Masterspec branded section 5211PP POTTER ALUMINIUM INTERNAL PARTITIONS is available for download
from the following resources.
www.masterspec.co.nz
www.potters.co.nz
www.eboss.co.nz
www.productspec.co.nz
PAS311 PAS311/D PAS313/A PAS313/B
132 FLAT 132 JOINTING PLATE ADJUSTABLE MULTI ADJUSTABLE MULTI
TERMINATION CAP TRACK A (144-176MM) TRACK B (144-176MM)
PAS314 PAS314/A PAS315 PAS316
132 PLASTERBOARD 132 GLAZING 132 MEDIUM POCKET 132 SNAP IN POCKET
POCKET ADAPTOR CAPPING/FRAME
CAPPING/FRAME
STAKE/6 STAKE/7
PVC SKIRTIING INFILL UNIVERSAL JAMBSEAL INFILL ACE CAPTIVE GLAZING POST
JAMBSEAL WEDGE SPIGOT
FLOOR LEVEL
PAS310
132 HEAD/SILL
TRACK
PAS012
25 EXTENDER TRACK USG 150MM STEEL
TRACK
FLOOR LEVEL
ACE CAPTIVE
WEDGE
PAS321 PAS320
132 GLAZING SILL 132 GLAZING BEAD
TRANSOM
GLAZING PANEL
PAS319 PAS320
132 GLAZING SILL 132 GLAZING BEAD
FLOOR LEVEL
GLAZING PANEL
PAS319 PAS320
132 GLAZING SILL 132 GLAZING BEAD
PAS317
132 CLIP IN 40MM
DOOR STOP
40MM DOOR
PAS314
132 PLASTERBOARD
POCKET
CAPPING/FRAME
PAS317
132 CLIP IN 40MM
DOOR STOP
HINGE SUPPORT
FLAT BAR
40MM DOOR
PAS324 PAS317
132 CORNER POST 132 CLIP IN 40MM
DOOR STOP
PAS316
132 SNAP IN POCKET
PAS324
132 CORNER POST
ACE CAPTIVE
GLAZING PANEL
WEDGE
PAS316
PAS317 132 SNAP IN POCKET
132 CLIP IN 40MM
DOOR STOP
PAS317 PAS316
132 CLIP IN 40MM 132 SNAP IN POCKET
DOOR STOP
PAS316
PAS318 132 SNAP IN POCKET
132 CLIP IN 50MM
DOOR STOP
50MM DOOR
UNIVERSAL
JAMBSEAL
PAS318 PAS316
132 CLIP IN 50MM 132 SNAP IN POCKET
DOOR STOP
PAS314
132 PLASTERBOARD
POCKET
CAPPING/FRAME
PAS317
132 CLIP IN 40MM
DOOR STOP
40MM DOOR
PAS314
132 PLASTERBOARD
POCKET
CAPPING/FRAME
PAS317
132 CLIP IN 40MM
DOOR STOP
HINGE SUPPORT
FLAT BAR
40MM DOOR
PAS318
132 CLIP IN 50MM
DOOR STOP
50MM DOOR
PAS314
132 PLASTERBOARD
POCKET
CAPPING/FRAME
PAS318
132 CLIP IN 50MM
DOOR STOP
HINGE SUPPORT
FLAT BAR
50MM DOOR
PAS313/A PAS313/B
ADJUSTABLE MULTI ADJUSTABLE MULTI
TRACK A (144-176MM) TRACK B (144-176MM)
PAS317
PAS HINGE 132 CLIP IN 40MM
DOOR STOP
PAS313/A PAS313/B
ADJUSTABLE MULTI ADJUSTABLE MULTI
TRACK A (144-176MM) TRACK B (144-176MM)
13MM
PLASTERBOARD
LINING (1ST LAYER)
PAS313/A PAS313/B
ADJUSTABLE MULTI ADJUSTABLE MULTI
TRACK A (144-176MM) TRACK B (144-176MM)
PAS317
PAS HINGE 132 CLIP IN 40MM
DOOR STOP
PAS313/A PAS313/B
ADJUSTABLE MULTI ADJUSTABLE MULTI
TRACK A (144-176MM) TRACK B (144-176MM)
13MM
PLASTERBOARD
LINING (1ST LAYER)
PAS313/A PAS313/B
ADJUSTABLE MULTI ADJUSTABLE MULTI
TRACK A (144-176MM) TRACK B (144-176MM)
PAS317
PAS HINGE 132 CLIP IN 40MM
DOOR STOP
PAS313/A PAS313/B
ADJUSTABLE MULTI ADJUSTABLE MULTI
TRACK A (144-176MM) TRACK B (144-176MM)
PAS313/A PAS313/B
ADJUSTABLE MULTI ADJUSTABLE MULTI
TRACK A (144-176MM) TRACK B (144-176MM)
PAS313/A PAS313/B
ADJUSTABLE MULTI ADJUSTABLE MULTI
TRACK A (144-176MM) TRACK B (144-176MM)
13MM
PLASTERBOARD
LINING
PAS314
132 PLASTERBOARD
POCKET
CAPPING/FRAME
PAS317
132 CLIP IN 40MM
DOOR STOP
PAS502
FLAT SLIPPER PLATE
PAS314 13MM
132 PLASTERBOARD PLASTERBOARD
POCKET LINING
CAPPING/FRAME
PAS317
132 CLIP IN 40MM
DOOR STOP
HINGE SUPPORT
FLAT BAR
PAS502
FLAT SLIPPER PLATE
PAS314
132 PLASTERBOARD
POCKET
CAPPING/FRAME
PAS317
132 CLIP IN 40MM
DOOR STOP
PAS502
FLAT SLIPPER PLATE
13MM
PAS314
PLASTERBOARD
132 PLASTERBOARD
LINING
POCKET
CAPPING/FRAME
PAS317
132 CLIP IN 40MM
DOOR STOP
HINGE SUPPORT
FLAT BAR
PAS502
FLAT SLIPPER PLATE
PAS500/100
100MM DOOR STILE
PAS503 PAS317
75MM TOP & BOTTOM 132 CLIP IN 40MM
RAIL DOOR STOP
PAS504
GLAZING BEAD
GLAZING PANEL
PAS504
GLAZING BLOCK GLAZING BEAD
PAS503/100
100MM TOP &
BOTTOM RAIL
PAS316
132 SNAP IN POCKET
PAS317
132 CLIP IN 40MM
DOOR STOP
PAS503
75MM TOP & BOTTOM
RAIL
GLAZING PANEL
GLAZING WEDGE
PAS503
75MM TOP & BOTTOM
RAIL
FLOOR LEVEL
PAS503/100 PAS316
100MM TOP & 132 SNAP IN POCKET
BOTTOM RAIL
PAS317
132 CLIP IN 40MM
DOOR STOP
PAS503/100
100MM TOP &
BOTTOM RAIL
PAS RP8SI
FLOOR LEVEL
Suite overview
C SERIES 45
Potter Interior Systems new series of partitioning systems incorporates a number of new design elements and is
still interchangeable with the old.
Potters have consulted architects, designers, builders and glazing companies and have designed an aluminium
system to suit all design and budget requirements.
C Series 45 is used as a commodity system when the budget is an factor but can also be designed into the A
Series for a slimmer look.
Specication
The Masterspec branded section 5211PP POTTER ALUMINIUM INTERNAL PARTITIONS is available for download
from the following resources.
www.masterspec.co.nz
www.potters.co.nz
www.eboss.co.nz
www.productspec.co.nz
C SERIES 45
PAS007 PAS008 PAS009 PAS009/B PAS009/35
45 DOORJAMB SUITS 45 DOORJAMB SUITS 100MM SKIRTING 150MM SKIRTING 35mm CLIP ON
DOORS TO 40MM DOORS TO 50MM SKIRTING
THICK THICK
STAKE/6 STAKE/7
PVC SKIRTIING INFILL UNIVERSAL JAMBSEAL INFILL ACE CAPTIVE GLAZING POST
JAMBSEAL WEDGE SPIGOT
13MM
13MM
PLASTERBOARD
PLASTERBOARD
LINING (2ND LAYER)
LINING
13MM
PLASTERBOARD
LINING (1ST LAYER)
13MM
PLASTERBOARD
LINING
13MM
PLASTERBOARD
LINING
FLOOR LEVEL
PAS010
105 HEAD/SILL
TRACK
PAS010/R
C SERIES 45
64mm CAPPING
HEAD/FRAME
13MM
PLASTERBOARD USG 64MM STEEL
LINING STUD
PAS010
105 HEAD/SILL
TRACK
13MM
PLASTERBOARD
LINING
13MM
PLASTERBOARD
LINING
PAS007
JAMBSEAL INFILL
45 DOORJAMB SUITS
DOORS TO 40MM
THICK
40MM DOOR
PAS005 PAS005
45 GLAZING BEAD 45 GLAZING BEAD
PAS004 PAS005
45 GLAZING 45 GLAZING BEAD
MULLION/SILL
GLAZING PANEL
PAS004 PAS011/A
45 GLAZING 105 FLAT
MULLION/SILL TERMINATION CAP
PAS005
45 GLAZING BEAD
PAS004
45 GLAZING
PAS005
MULLION/SILL 45 GLAZING BEAD
GLAZING PANEL
PAS004 PAS005
45 GLAZING 45 GLAZING BEAD
MULLION/SILL
PAS010/R
64mm CAPPING
HEAD/FRAME
PAS009
100MM SKIRTING
PVC SKIRTIING INFILL
PAS004
45 GLAZING
MULLION/SILL
PAS005 PAS005
45 GLAZING BEAD 45 GLAZING BEAD
PAS004
45 GLAZING
MULLION/SILL
PAS005
45 GLAZING BEAD
PAS011/A
PAS007
105 FLAT
45 DOORJAMB SUITS
TERMINATION CAP
DOORS TO 40MM
THICK
PAS008
45 DOORJAMB SUITS
DOORS TO 50MM PAS011/A
THICK 105 FLAT
TERMINATION CAP
UNIVERSAL
JAMBSEAL
50MM DOORS
PAS008 PAS011/A
45 DOORJAMB SUITS 105 FLAT
DOORS TO 50MM TERMINATION CAP
THICK
UNIVERSAL
JAMBSEAL
50MM DOORS
C SERIES 45
STUD PLASTERBOARD
LINING
PAS010/R
64mm CAPPING
HEAD/FRAME
PAS007
PAS HINGE
45 DOORJAMB SUITS
DOORS TO 40MM
THICK
40MM DOOR
40MM DOOR
PAS007
UNIVERSAL
45 DOORJAMB SUITS
JAMBSEAL
DOORS TO 40MM
THICK
SILICONE PACKER
PAS005
45 GLAZING BEAD
PAS004
45 GLAZING
MULLION/SILL
C SERIES 45
USG 64MM STEEL PLASTERBOARD
STUD LINING
PAS010/R
64mm CAPPING
HEAD/FRAME
PAS007
45 DOORJAMB SUITS
PAS HINGE
DOORS TO 40MM
THICK
40MM DOOR
40MM DOOR
PAS007
UNIVERSAL
45 DOORJAMB SUITS
JAMBSEAL
DOORS TO 40MM
THICK
PAS010/R
64mm CAPPING
HEAD/FRAME
PAS004 PAS011/A
45 GLAZING 105 FLAT
MULLION/SILL TERMINATION CAP
PAS005
45 GLAZING BEAD
C SERIES 45
PAS004 40MM DOOR
45 GLAZING
MULLION/SILL
PAS007
PAS005
45 DOORJAMB SUITS
45 GLAZING BEAD
DOORS TO 40MM
THICK
GLAZING PANEL
GLAZING WEDGE
PAS004/GP
45 GLAZING/75MM
CORNER POST
PAS010/R
64mm CAPPING
HEAD/FRAME
PAS007
PAS HINGE
45 DOORJAMB SUITS
DOORS TO 40MM
THICK
40MM DOOR
40MM DOOR
PAS007
UNIVERSAL
45 DOORJAMB SUITS
JAMBSEAL
DOORS TO 40MM
THICK
PAS004/GP
45 GLAZING/75MM
CORNER POST
PAS007 PAS011/A
45 DOORJAMB SUITS 105 FLAT
DOORS TO 40MM TERMINATION CAP
THICK
UNIVERSAL
PAS503/100 JAMBSEAL
100MM TOP &
BOTTOM RAIL
GLAZING PANEL
PAS504
GLAZING BEAD
PAS503/100
100MM TOP &
BOTTOM RAIL
PAS RP8SI
FLOOR LEVEL
PAS503
75MM TOP & BOTTOM
RAIL
GLAZING PANEL
GLAZING WEDGE
PAS503
75MM TOP & BOTTOM
RAIL
FLOOR LEVEL
C SERIES 45
PLASTERBOARD
LINING
PAS500
75MM DOOR STILE
GLAZING WEDGE
PAS500
75MM DOOR STILE
PAS502 UNIVERSAL
FLAT SLIPPER PLATE JAMBSEAL
PAS007
JAMBSEAL INFILL 45 DOORJAMB SUITS
DOORS TO 40MM
THICK
PAS004
45 GLAZING PAS005
MULLION/SILL 45 GLAZING BEAD
PAS007
PAS HINGE
45 DOORJAMB SUITS
DOORS TO 40MM
THICK
PAS502 UNIVERSAL
FLAT SLIPPER PLATE JAMBSEAL
PAS500
75MM DOOR STILE
PAS500
75MM DOOR STILE
UNIVERSAL
JAMBSEAL
PAS010/R PAS007
64mm CAPPING 45 DOORJAMB SUITS
HEAD/FRAME DOORS TO 40MM
THICK
USG 64MM STEEL
13MM STUD
PLASTERBOARD
LINING
Suite overview
DS Series Doors
Designed to t with Potter aluminium systems
Available in 38mm thick doors only.
Styles and rails sizes 75mm and 100mm. Mid rails 45mm and 75mm.
Can accommodate glass thicknesses of 10.38mm thick laminated glass.
DS Series Sliders
Designed to t with Potter aluminium systems, available in numerous congurations based around the 38mm
DS SERIES
Door series.
Specication
The Masterspec branded section 5211PP POTTER ALUMINIUM INTERNAL PARTITIONS is available for download
from the following resources.
www.masterspec.co.nz
www.potters.co.nz
www.eboss.co.nz
www.productspec.co.nz
DS SERIES
5.6.1 5.6.2 5.6.9
5.6.4 5.6.3 5.6.10
5.6.11 5.6.5
5.6.12
105MM PROFILES = 64MM STUD TOUGHENED SAFETY GLASS 6MM 4.0 75MM
132MM PROFILES = 92MM STUD TOUGHENED SAFETY GLASS 8MM 6.0 100MM
FOR SOUND TRANSMISSION CLASS POINTS (STC) REFER TO LAMINATED SAFETY GLASS 6MM 3.0 75MM
THE POTTERS WEBSITE WWW.POTTERS.CO.NZ IN THE
PARTITIONING" SECTION LAMINATED SAFETY GLASS 8MM 5.0 100MM
PAS501
SLIDE ACOUSTIC
SLIPPER PLATE
DS SERIES
PAS504 PAS508
GLAZING BEAD BOTTOM ROLLER
TRACK
STAKE/6 STAKE/7
PVC SKIRTIING INFILL UNIVERSAL JAMBSEAL INFILL ACE CAPTIVE GLAZING POST
JAMBSEAL WEDGE SPIGOT
PAS532 PAS531
GLAZING RAIL PELMET
M6/M8 PAS522/CS
DS SERIES
CS ROLLER PACK CS SLIDING DOOR
M6/90KG M8/240KG TRACK
PAS503
75MM TOP & BOTTOM
RAIL
UNIVERSAL
JAMBSEAL
GLAZING PANEL
PAS503 PAS504
75MM TOP & BOTTOM GLAZING BEAD
RAIL
PAS005 PAS507
45 GLAZING BEAD INTERNAL GUIDE
PAS532 PAS531
GLAZING RAIL PELMET
DS SERIES
M6/M8 PAS522/CS
CS ROLLER PACK CS SLIDING DOOR
M6/90KG M8/240KG TRACK
PAS503
75MM TOP & BOTTOM
RAIL
UNIVERSAL
JAMBSEAL
PAS023 PAS504
105 POCKET FLUSH GLAZING BEAD
FILLER
GLAZING PANEL
PAS503 PAS504
75MM TOP & BOTTOM GLAZING BEAD
RAIL
PAS507
INTERNAL GUIDE
GUIDE TRACK
FLOOR LEVEL
PAS532 PAS531
GLAZING RAIL PELMET
PAS522/CS
DS SERIES
CS SLIDING DOOR
TRACK
GLAZING PANEL
PAS004 PAS005
45 GLAZING 45 GLAZING BEAD
MULLION/SILL
FLOOR LEVEL
PAS532 PAS531
GLAZING RAIL PELMET
DS SERIES
M6/M8 PAS522/CS
CS ROLLER PACK CS SLIDING DOOR
M6/90KG M8/240KG TRACK
PAS503
75MM TOP & BOTTOM
RAIL
UNIVERSAL
JAMBSEAL
PAS504
ACE CAPTIVE
GLAZING BEAD
WEDGE
GLAZING PANEL
PAS504
GLAZING BEAD
PAS503/100
100MM TOP &
BOTTOM RAIL
PAS005 PAS507
45 GLAZING BEAD INTERNAL GUIDE
PAS532 PAS531
GLAZING RAIL PELMET
M6/M8 PAS522/CS
DS SERIES
CS ROLLER PACK CS SLIDING DOOR
M6/90KG M8/240KG TRACK
PAS503
75MM TOP & BOTTOM
RAIL
UNIVERSAL
JAMBSEAL
PAS023 PAS504
105 POCKET FLUSH GLAZING BEAD
FILLER
GLAZING PANEL
PAS503/100 PAS504
100MM TOP & GLAZING BEAD
BOTTOM RAIL
PAS507
INTERNAL GUIDE
GUIDE TRACK
FLOOR LEVEL
DS SERIES
USG 64MM STEEL PAS032 PAS004/GP GLAZING PANEL
STUD 105 EDGE POCKET 45 GLAZING/75MM
CAPPING CORNER POST
PAS533
DOOR STOP FRAME
DS SERIES
USG 64MM STEEL PAS005 PAS004/100GP
STUD 45 GLAZING BEAD 45 GLAZING/100MM
CORNER POST
PAS533
DOOR STOP FRAME
DS SERIES
USG 64MM STEEL PAS005 PAS004/100GP
STUD 45 GLAZING BEAD 45 GLAZING/100MM
CORNER POST
PAS502 PAS521
FLAT SLIPPER PLATE SLIDING DOOR
FRAME
PAS500/100
100MM DOOR STILE
PAS520
SLIDING DOOR
LOCATING FRAME
PAS005
45 GLAZING BEAD
PAS004
45 GLAZING
MULLION/SILL
DS SERIES
PAS017
PAS503
105 SNAP IN
75MM TOP & BOTTOM
DOORSTOP UP TO
RAIL
40MM DOORS
PAS504
GLAZING BEAD
GLAZING PANEL
PAS504
GLAZING BLOCK GLAZING BEAD
PAS503/100
100MM TOP &
BOTTOM RAIL
PAS524
SLIDING DOOR TOP
DS SERIES
GUIDE
PAS503
75MM TOP & BOTTOM PAS504
RAIL GLAZING BEAD
GLAZING PANEL
PAS504
GLAZING BLOCK GLAZING BEAD
PAS503/100
100MM TOP &
BOTTOM RAIL
200kg Bottom
ROLLER PACK
DS SERIES
PAS523/CS
CS SLIDING DOOR
GLAZING WEDGE PELMET
PAS503/100 UNIVERSAL
100MM TOP & JAMBSEAL
BOTTOM RAIL
PAS503/100
100MM TOP &
BOTTOM RAIL
FIXED
GLAZING PANEL
PAS504
GLAZING BEAD
DS SERIES
PAS523/CS
CS SLIDING DOOR
GLAZING WEDGE PELMET
PAS503
UNIVERSAL
75MM TOP & BOTTOM
JAMBSEAL
RAIL
PAS504
GLAZING BEAD
GLAZING GASKET
GLAZING PANEL
FIXED
GLAZING PANEL
PAS504
GLAZING BEAD
PAS503
GLAZING PANEL 75MM TOP & BOTTOM
RAIL
DS SERIES
USG 92MM STEEL PAS332 PAS004/GP GLAZING PANEL
STUD 132 EDGE POCKET 45 GLAZING/75MM
CAPPING CORNER POST
PAS535
132 DOOR STOP
FRAME
DS SERIES
USG 92MM STEEL PAS332 PAS004/100GP
STUD 132 EDGE POCKET 45 GLAZING/100MM
CAPPING POST
PAS535
132 DOOR STOP
FRAME
DS SERIES
USG 92MM STEEL PAS332 PAS004/GP GLAZING PANEL
STUD 132 EDGE POCKET 45 GLAZING/75MM
CAPPING CORNER POST
PAS535
132 DOOR STOP
FRAME
DS SERIES
USG 92MM STEEL PAS332 PAS004/100GP
STUD 132 EDGE POCKET 45 GLAZING/100MM
CAPPING POST
PAS535
132 DOOR STOP
FRAME
Potter Interior Systems new series of partitioning systems incorporates a number of new design elements and is
still interchangeable with existing systems.
Potters have consulted architects, designers, builders and glazing companies and have designed an aluminium
system to suit all design and budget requirements.
E Series 105 provides an edgeline glazing and double glazing design with clean lines to provide a clean look to
your partition system. E Series 105 gives a standard detail of 105mm x 25mm.
E SERIES 105
Specication
The Masterspec branded section 5211PP POTTER ALUMINIUM INTERNAL PARTITIONS is available for download
from the following resources.
www.masterspec.co.nz
www.potters.co.nz
www.eboss.co.nz
www.productspec.co.nz
E SERIES 105
6.5.4 6.5.2 6.5.3 6.5.1 6.5.6
E SERIES 105
PAS036 PAS038 PAS040
DOUBLE GLAZING 105 EDGE SNAP IN DOUBLE GLAZING
BEAD POCKET FRAME
E SERIES 105
STAKE/6 STAKE/7
PVC SKIRTIING INFILL UNIVERSAL JAMBSEAL INFILL ACE CAPTIVE GLAZING POST
JAMBSEAL WEDGE SPIGOT
E SERIES 105
ACE CAPTIVE PAS032
WEDGE 105 EDGE POCKET
CAPPING
PAS011/D
105 JOINING PLATE
HINGE SUPPORT
FLAT BAR
E SERIES 105
USG 64MM STEEL PAS HINGE 40MM DOOR GLAZING PANEL
STUD
PAS014
105 PLASTERBOARD
POCKET
CAPPING/FRAME
PAS032 13MM
105 EDGE POCKET PLASTERBOARD
CAPPING LINING
GLAZING PANEL
E SERIES 105
USG 64MM STEEL PAS032 PAS032
STUD 105 EDGE POCKET 105 EDGE POCKET
CAPPING CAPPING
PAS017
105 SNAP IN
DOORSTOP UP TO
40MM DOORS
PAS032
105 EDGE POCKET 40MM DOOR
CAPPING
PAS014
PAS011/D 105 PLASTERBOARD
105 JOINING PLATE POCKET
CAPPING/FRAME
E SERIES 105
USG 64MM STEEL PAS040 PAS040 GLAZING PANEL
STUD DOUBLE GLAZING DOUBLE GLAZING
FRAME FRAME
PAS017 PAS014
105 SNAP IN 105 PLASTERBOARD
DOORSTOP UP TO POCKET
40MM DOORS CAPPING/FRAME
HINGE SUPPORT
FLAT BAR
PAS040
DOUBLE GLAZING 40MM DOOR
FRAME
PAS014/A PAS HINGE 13MM
105 GLAZING PLASTERBOARD
ADAPTOR LINING
USG 64MM STEEL
STUD
SLTM64
64MM TERMINATION
CAP
E SERIES 132
X
7.3.1 1 : 5 @ A4 10/11/2014
10/01/2011 0800 POTTER (0800 768 837) WWW.POTTERS.CO.NZ
SHEET SCALE ISSUED DATE DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
13MM GLAZING PANEL
PLASTERBOARD
LINING
PAS315
132 MEDIUM POCKET
CAPPING/FRAME
PAS317
132 CLIP IN 40MM
DOOR STOP
40MM DOOR
E SERIES 132
PAS314
132 PLASTERBOARD
POCKET
CAPPING/FRAME
PAS317
132 CLIP IN 40MM
DOOR STOP
HINGE SUPPORT
FLAT BAR
40MM DOOR
GLAZING WEDGE
PAS339
GLAZING PANEL
E SERIES 132
GLAZING PANEL PAS336
DOUBLE GLAZING
BEAD
PAS338
132 SNAP IN POCKET
PAS317
132 CLIP IN 40MM
DOOR STOP
GLAZING PANEL
40MM DOOR
E SERIES 132
PAS314
132 PLASTERBOARD
POCKET
CAPPING/FRAME
PAS317
132 CLIP IN 40MM
DOOR STOP
HINGE SUPPORT
FLAT BAR
40MM DOOR
GLAZING PANEL
PAS334
132 EDGE GLAZING
BEAD
Suite overview
Softline Aluminium Ofce Partitioning is a unique system that incorporates new design elements to facilitate
creative oor plans and to enable the nished installation to be of the highest standard.
Softline Aluminium Partitioning is totally designed in New Zealand by Potter Interior Systems in conjunction with
architects, installers and building owners to bring together a system that allows the design of today to be the
ofce of tomorrow.
As the name suggests, Softline Aluminium Partitioning has a much softer look and a softer feel because of its
radiused corners on all exposed edges. The special feature bars and concave beads that are available for the
glazing sections within Softline give a look that is totally unique and very modern.
The design elements offered by these proles allow the nished partitioning to look quite different from traditional
square-looking partitioning aesthetic that is available from other systems on the market.
Specication
The Masterspec branded section 5211PP POTTER ALUMINIUM INTERNAL PARTITIONS is available for download
from the following resources.
www.masterspec.co.nz
www.potters.co.nz
www.eboss.co.nz
www.productspec.co.nz
SOFTLINE SERIES
SOFTLINE SERIES
7.4.3 7.5.6
7.4.4
7.4.5
7.4.6
SLTM64
64MM TERMINATION
CAP
SOFTLINE SERIES
SLSK150 SLSK SLSS SLUP SLCP
150MM SKIRTING 100MM SKIRTING 26MM SMALL UNIVERSAL POST UNIVERSAL POST
SKIRTING
SLACC STAKE 4
SOSA4 SLACC STAKE 5
SOSA6 SLACC STAKE 6
SOFTLINE SERIES
13MM
USG 64MM STEEL PLASTERBOARD
STUD LINING
13MM 13MM
PLASTERBOARD PLASTERBOARD
LINING (1ST LAYER) LINING
SOFTLINE SERIES
PLASTERBOARD
LINING (2ND LAYER)
13MM
PLASTERBOARD
LINING (1ST LAYER)
13MM
PLASTERBOARD
LINING (1ST LAYER)
SOFTLINE SERIES
13MM
PLASTERBOARD
LINING (2ND LAYER)
13MM 13MM
PLASTERBOARD PLASTERBOARD
LINING (2ND LAYER) LINING
SOFTLINE SERIES
51MM USG STEEL
STUD
13MM SLSS
PLASTERBOARD 26MM SMALL
LINING SKIRTING
SOFTLINE SERIES
LINING
SLSK
100MM SKIRTING
SOFTLINE SERIES
USG 92MM STEEL 13MM
STUD PLASTERBOARD
LINING
SLFT64
64MM FLAT TRACK
13MM
PLASTERBOARD
LINING
13MM
SOFTLINE SERIES
PLASTERBOARD
LINING
SLHT64
64MM HEADTRACK
SLDS DOOR
DOOR STOP
SLHT92
92MM HEADTRACK
USG 92MM STEEL
STUD
SLHT92
92MM HEADTRACK
13MM
PLASTERBOARD
LINING
SOFTLINE SERIES
13MM
PLASTERBOARD
LINING
SLHT92
92MM HEADTRACK
SLDS DOOR
DOOR STOP
SLBE SLTM64
GLAZING BEAD 64MM TERMINATION
CAP
SLBE SLGB
GLAZING BEAD GLAZING BAR
SOFTLINE SERIES
GLAZING PANEL
SLBE SLGB
GLAZING BEAD GLAZING BAR
SLGB SLBE
GLAZING BAR GLAZING BEAD
SOFTLINE SERIES
FLOOR LEVEL
SLBE
GLAZING BEAD
SLBE SLTM64
GLAZING BEAD 64MM TERMINATION
CAP
SLBE SLGB
GLAZING BEAD GLAZING BAR
SLHT64
64MM HEADTRACK
SOFTLINE SERIES
SLGB
GLAZING BAR
SLBE
GLAZING BEAD
SOFTLINE SERIES
SLDS SLTM64 USG 64MM STEEL
DOOR STOP 64MM TERMINATION STUD
CAP
SLGB
GLAZING BAR
SOFTLINE SERIES
64MM HEADTRACK GLAZING BEAD 64MM TERMINATION
CAP
SLBE SLTM92
GLAZING BEAD 92MM TERMINATION
CAP
SLBE SLGB
GLAZING BEAD GLAZING BAR
SLBE SLBE
GLAZING BEAD GLAZING BEAD
SOFTLINE SERIES
SLBE SLTM92
GLAZING BEAD 92MM TERMINATION
CAP
SLBE SLGB
GLAZING BEAD GLAZING BAR
SLHT92
92MM HEADTRACK
SOFTLINE SERIES
SLGB
GLAZING BAR
SLBE
GLAZING BEAD
SOFTLINE SERIES
SLHT92 92MM TERMINATION SLBE
92MM HEADTRACK CAP GLAZING BEAD
SLGB
GLAZING BAR
SLBE
GLAZING BEAD
SOFTLINE SERIES
DOOR STOP SLTM92 USG 92MM STEEL
92MM TERMINATION STUD
CAP
DOOR SLDS
DOOR STOP
SOFTLINE SERIES
SLBE SLGB
GLAZING BEAD GLAZING BAR
DOOR
SOFTLINE SERIES
SLBE SLGB
GLAZING BEAD GLAZING BAR
SLUP
UNIVERSAL POST
SLDS
DOOR STOP
JAMBSEAL INFILL
DOOR
SOFTLINE SERIES
SOFTLINE SERIES
13MM USG 64MM STEEL SLDS DOOR
PLASTERBOARD STUD DOOR STOP
LINING
SLHT64
64MM HEADTRACK
SOFTLINE DOOR
HINGE
SOFTLINE SERIES
SLDS
DOOR STOP
DOOR SLDS
DOOR STOP
SOFTLINE SERIES
SOFTLINE SERIES
USG 92MM STEEL 13MM USG 92MM STEEL DOOR STOP
STUD PLASTERBOARD STUD
LINING
SLTM64
64MM TERMINATION
CAP
T SERIES 132
9
7.3.1 1 : 5 @ A4 10/11/2014
10/01/2011 0800 POTTER (0800 768 837) WWW.POTTERS.CO.NZ
SHEET SCALE ISSUED DATE DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
PAS310
132 HEAD/SILL
TRACK CEILING LEVEL
PAS316
132 SNAP IN POCKET
GLAZING WEDGE
PAS004 PAS005
45 GLAZING 45 GLAZING BEAD
MULLION/SILL
FLOOR LEVEL
PAS316
132 SNAP IN POCKET
GLAZING WEDGE
PAS320
PAS319 132 GLAZING BEAD
132 GLAZING SILL
FLOOR LEVEL
TRACK
PAS 802
DUAL TRUNKING
PAS 800
INFILL COVER PLATE
PAS 800
INFILL COVER PLATE
TRACK
PAS 800
INFILL COVER PLATE
CARPET BRICK
T SERIES 132
PAS 800
INFILL COVER PLATE
FLOOR LEVEL
T SERIES 132
GENERIC JOINERY
PAS 800
INFILL COVER PLATE
FLOOR LEVEL
T SERIES 132
PAS025 PAS026 SLTM64
PAS027
105 DF Head Track 105 DF Head Track Infill 105 TERMINATION
DF Base U Channel
64MM
CAP
132 DF Head Track 132 DF Head Track Infill 132 DF Base U Channel
DF SERIES
X
7.3.1 1 : 5 @ A4 10/11/2014
10/01/2011 0800 POTTER (0800 768 837) WWW.POTTERS.CO.NZ
SHEET SCALE ISSUED DATE DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
CONCRETE SLAB 6x12
POTTERS ACOUSTIC
FOAM TAPE
PAS310/R
132 HEAD/SILL
TRACK
DF SERIES
PAS326
PAS325
PAS327
QL48750
PERIMETER SEAL
SLEEVE ANCHOR
M6x50 OR RED PLUG
& 50mm 8g SCREW TEX SCREW
10g x 16mm
PAS310/R
132 HEAD/SILL
TRACK
GLAZING PANEL
PAS319 PAS320
132 GLAZING SILL 132 GLAZING BEAD
DF SERIES
FLOOR LEVEL
GLAZING BLOCK
PAS010/R
105 HEAD-SILL
TRACK
DF SERIES
PAS010/R
105 HEAD-SILL
TRACK
GLAZING PANEL
PAS019 PAS020
105 WIDELINE 105 GLAZING BEAD
GLAZING SILL
DF SERIES
FLOOR LEVEL
GLAZING BLOCK
TEX SCREW
10g x 16mm
PAS010/R
105 HEAD-SILL
TRACK GLAZING PANEL
QL48750
PERIMETER SEAL
PAS025
PAS026
6x12
POTTERS ACOUSTIC
FOAM TAPE
DF SERIES
PAS310/R
132 HEAD/SILL
TRACK
GLAZING PANEL
PLASTERBOARD
LINING
GENERIC JOINERY
USG 92MM STEEL
STUD
INSULATION
PAS327
QL48750
PERIMETER SEAL
PAS326
PAS325
6x12
POTTERS ACOUSTIC
FOAM TAPE
DF SERIES
PAS010/R
105 HEAD-SILL
TRACK
USG 64MM STEEL
STUD
SLEEVE ANCHOR
M6x50 OR RED PLUG
PLASTERBOARD
& 50mm 8g SCREW
LINING
INSULATION
CONCRETE WALL
PAS027
QL48750
PERIMETER SEAL
PAS026
PAS025
DF SERIES
PAS310/R
132 HEAD/SILL
TRACK
SLEEVE ANCHOR
USG 92MM STEEL M6x50 OR RED PLUG
STUD & 50mm 8g SCREW
INSULATION
PLASTERBOARD
LINING
CONCRETE WALL
PAS327
QL48750
PERIMETER SEAL
PAS325
PAS326
DF SERIES
GLAZING PANEL
50x100 ALUMINIUM
ANGLE
FLOOR LEVEL
50
80
100
X SERIES
PAS532 PAS522/CSD
GLAZING RAIL CS DOUBLE SLIDING
DOOR FRAME
PAS503 M6/M8
75MM TOP & BOTTOM CS ROLLER PACK
RAIL M6/90KG M8/240KG
PAS531
PELMET
PAS504
ACE CAPTIVE
GLAZING BEAD
WEDGE
GLAZING PANEL
PAS005
45 GLAZING BEAD
PAS504
GLAZING WEDGE GLAZING BEAD
PAS503/100
PAS004/100GP 100MM TOP &
45 GLAZING/100MM BOTTOM RAIL
CORNER POST
PAS501 PAS500/100
SLIDE ACOUSTIC 100MM DOOR STILE
SLIPPER PLATE
PAS502
FLAT SLIPPER PLATE
GLAZING PANEL
PAS500/100
100MM DOOR STILE
MULTI DOOR PICK UP
PAS502
FLAT SLIPPER PLATE
PAS500/100 PAS502
100MM DOOR STILE FLAT SLIPPER PLATE
GLAZING PANEL
X SERIES
PAS502
FLAT SLIPPER PLATE
PAS011/D
105 JOINING PLATE
PAS509
PAS005
45 GLAZING BEAD
PAS500/100
100MM DOOR STILE
PAS500/100
100MM DOOR STILE PAS509
PAS524
PAS524 SLIDING DOOR TOP
SLIDING DOOR TOP GUIDE
GUIDE
PAS503/100
100MM TOP &
BOTTOM RAIL
PAS503/100
100MM TOP &
BOTTOM RAIL
PAS504
GLAZING BEAD
PAS504
GLAZING BEAD
GLAZING BLOCK
PAS503/100
100MM TOP &
BOTTOM RAIL
FLOOR LEVEL
TIMBER PACKER
X SERIES
PAS500/100 PAS500/100
100MM DOOR STILE 100MM DOOR STILE
PAS509 PAS509
PAS502 PAS502
FLAT SLIPPER PLATE FLAT SLIPPER PLATE
PAS502 PAS502
FLAT SLIPPER PLATE FLAT SLIPPER PLATE
PAS509 PAS509
PAS500/100 PAS500/100
100MM DOOR STILE 100MM DOOR STILE
PAS533
DOOR STOP FRAME
X SERIES
PAS501 PAS500/100
SLIDE ACOUSTIC 100MM DOOR STILE
SLIPPER PLATE
PAS502
FLAT SLIPPER PLATE
GLAZING PANEL
PAS500/100
100MM DOOR STILE
MULTI DOOR PICK UP
PAS502
FLAT SLIPPER PLATE
PAS500/100 PAS502
100MM DOOR STILE FLAT SLIPPER PLATE
GLAZING PANEL
PAS502
FLAT SLIPPER PLATE
PAS500/100
100MM DOOR STILE
X SERIES
PAS502
FLAT SLIPPER PLATE
JAMBSEAL INFILL
PAS521
SLIDING DOOR PAS500/100
FRAME 100MM DOOR STILE
PAS520
SLIDING DOOR
PAS005 LOCATING FRAME
45 GLAZING BEAD
PAS004
45 GLAZING
MULLION/SILL
GLAZING PANEL
X SERIES
PAS020
105 GLAZING BEAD
PAS021/B
105 GLAZING
SILL/TRANSOM
PAS020
105 GLAZING BEAD
PAS019 PAS020
105 WIDELINE 105 GLAZING BEAD
GLAZING SILL
PAS001
PAS CARPET SPACER
PAS506
STANDARD FRONT ACOUSTIC
ALUMINIUM (13MM) SLIPPER PLATE
JAMB
PAS500/120
110
120MM DOOR STILE
PAS504
GLAZING BEAD
UNITS SUPPLIED WITH
ALUMINIUM JAMBS TO
SUIT 13MM WALL
LININGS AS STANDARD.
PAS500/120
100
STANDARD PAS502
ALUMINIUM (13MM) FLAT SLIPPER PLATE
SPLIT JAMB
13MM 13MM
PLASTERBOARD PLASTERBOARD
LINING LINING
M6/M8 13MM
CS ROLLER PACK PLASTERBOARD
M6/90KG M8/240KG LINING
17.5MM STD CLEARANCE
STANDARD
ALUMINIUM (13MM)
SPLIT HEAD
PAS503/100
100MM TOP &
BOTTOM RAIL
PAS504
GLAZING BEAD
PAS504 PAS503/100
GLAZING BEAD 100MM TOP &
BOTTOM RAIL
13MM
PLASTERBOARD
LINING
PAS310
TRIPLE SEALS 132 HEAD/SILL
MOUNTED UNDER TRACK
DOOR TO REDUCE
NOISE
TRANSMISSION FLOOR LEVEL
X SERIES
PAS523/CS
CS SLIDING DOOR
GLAZING WEDGE PELMET
GLAZING PANEL
FIXED
PAS504
GLAZING BEAD
PAS004
45 GLAZING FLOOR LEVEL
MULLION/SILL
X SERIES
13MM
PLASTERBOARD
LINING
13MM
PLASTERBOARD
LINING
PAS010 PAS001
105 HEAD/SILL PAS CARPET SPACER
TRACK
GLAZING PANEL
GLAZING PANEL
GLAZING WEDGE
PAS005
45 GLAZING BEAD
PAS033
105 EDGE GLAZING PAS001
FRAME PAS CARPET SPACER
PAS500/100 PAS005
100MM DOOR STILE 45 GLAZING BEAD
PAS500/100
100MM DOOR STILE
PAS004/100GP
45 GLAZING/100MM
CORNER POST
GLAZING WEDGE
PAS506
FRONT ACOUSTIC
SLIPPER PLATE
PAS506
FRONT ACOUSTIC
SLIPPER PLATE
GLAZING WEDGE
PAS500/100 PAS004/100GP
100MM DOOR STILE 45 GLAZING/100MM
CORNER POST
PAS500/100
100MM DOOR STILE PAS005
45 GLAZING BEAD
GLAZING PANEL
ACE CAPTIVE
WEDGE
PAS501
SLIDE ACOUSTIC
SLIPPER PLATE
PAS032
105 EDGE POCKET
USG 64MM STEEL CAPPING
STUD
13MM
PLASTERBOARD
LINING
X SERIES
PAS503
75MM TOP & BOTTOM
RAIL
FIXED
GLAZING PANEL
PAS504
GLAZING PANEL GLAZING BEAD
PAS503/100
100MM TOP &
BOTTOM RAIL
GLAZING BLOCK
PAS508
PAS004 BOTTOM ROLLER
45 GLAZING TRACK
MULLION/SILL
FLOOR LEVEL
X SERIES
PAS017
105 SNAP IN
DOORSTOP UP TO
40MM DOORS
PAS017
105 SNAP IN
DOORSTOP UP TO
40MM DOORS
PAS533 PAS011/D
DOOR STOP FRAME 105 JOINING PLATE
GLAZING PANEL
PAS502 PAS032
FLAT SLIPPER PLATE 105 EDGE POCKET
CAPPING
X SERIES
13MM PAS313/B
PLASTERBOARD ADJUSTABLE MULTI
LINING (2ND LAYER) TRACK B (144-176MM)
PAS313/A
ADJUSTABLE MULTI
TRACK A (144-176MM) PAS317
132 CLIP IN 40MM
PAS HINGE DOOR STOP
HINGE SUPPORT
40MM DOOR FLAT BAR
PAS317
PAS314 132 CLIP IN 40MM
132 PLASTERBOARD DOOR STOP
POCKET
CAPPING/FRAME PAS314/A
132 GLAZING
GLAZING PANEL ADAPTOR
PAS313/A PAS313/B
ADJUSTABLE MULTI ADJUSTABLE MULTI
TRACK A (144-176MM) TRACK B (144-176MM)
PAS313/A PAS313/B
ADJUSTABLE MULTI ADJUSTABLE MULTI
TRACK A (144-176MM) TRACK B (144-176MM)
13MM PAS313/B
PLASTERBOARD ADJUSTABLE MULTI
LINING (2ND LAYER) TRACK B (144-176MM)
PAS503
75MM TOP & BOTTOM
RAIL
FIXED
GLAZING PANEL
PAS504
GLAZING PANEL GLAZING BEAD
PAS503/100
100MM TOP &
BOTTOM RAIL
GLAZING BLOCK
200kg Bottom
ROLLER PACK
PAS005
45 GLAZING BEAD PAS508/B
BOTTOM ROLLER
TRACK B
PAS004
45 GLAZING PAS508/A
MULLION/SILL BOTTOM ROLLER
TRACK A
FLOOR LEVEL
X SERIES
PAS317
PAS HINGE 132 CLIP IN 40MM
DOOR STOP
40MM DOOR
HINGE SUPPORT
FLAT BAR
PAS314/D
132 3-LAYER
POCKET/CAPPING
FRAME
13MM 13MM
PLASTERBOARD PLASTERBOARD
LINING LINING (1ST LAYER)
13MM
USG 92MM STEEL
PLASTERBOARD
STUD
LINING (2ND LAYER)
X SERIES
PAS005 PAS500/100
45 GLAZING BEAD 100MM DOOR STILE
PAS005 PAS500/100
45 GLAZING BEAD 100MM DOOR STILE
PAS032
105 EDGE POCKET
CAPPING 13MM
PLASTERBOARD
LINING
X SERIES
ACOUSTIC SEAL
PAS504/B
GLAZING BEAD
PAS502
FLAT SLIPPER PLATE
PAS014 13MM
105 PLASTERBOARD PLASTERBOARD
POCKET LINING
CAPPING/FRAME
PAS017
105 SNAP IN
DOORSTOP UP TO
40MM DOORS
HINGE SUPPORT
FLAT BAR
ACOUSTIC SEAL
PAS502
FLAT SLIPPER PLATE
PAS504/B
GLAZING BEAD
PAS500/120
120MM DOOR STILE
PAS317
132 CLIP IN 40MM
DOOR STOP
PAS504/B
GLAZING BEAD
ACOUSTIC SEAL
PAS502
FLAT SLIPPER PLATE
PAS314 13MM
132 PLASTERBOARD PLASTERBOARD
POCKET LINING
CAPPING/FRAME
PAS317
132 CLIP IN 40MM
DOOR STOP
HINGE SUPPORT
FLAT BAR
ACOUSTIC SEAL
PAS502
FLAT SLIPPER PLATE
PAS504/B
GLAZING BEAD
PAS500/120
120MM DOOR STILE
PAS500
75MM DOOR STILE
PAS500/100
100MM DOOR STILE
PAS022 PAS021/A
105 TRANSOM BEAD 105 GLAZING
SILL/TRANSOM
PAS004
45 GLAZING
MULLION/SILL
PVC INFILL
PAS005
45 GLAZING BEAD
PAS524
SLIDING DOOR TOP
GLAZING WEDGE GUIDE
PAS503
ACE CAPTIVE 75MM TOP & BOTTOM
WEDGE
RAIL
PAS504
GLAZING BEAD
GLAZING WEDGE
GLAZING GASKET
FIXED
PAS504
GLAZING BEAD
PAS503/100
100MM TOP &
BOTTOM RAIL
GLAZING BLOCK
PAS005 PAS508/B
45 GLAZING BEAD BOTTOM ROLLER
TRACK B
PAS004 PAS508/A
45 GLAZING BOTTOM ROLLER
MULLION/SILL TRACK A
FLOOR LEVEL
X SERIES
PAS313/A PAS313/B
ADJUSTABLE MULTI ADJUSTABLE MULTI
TRACK A (144-176MM) TRACK B (144-176MM)
PAS317
PAS HINGE 132 CLIP IN 40MM
DOOR STOP
PAS500/100
100MM DOOR STILE
GLAZING PANEL
PAS500/100
100MM DOOR STILE
PAS502
FLAT SLIPPER PLATE PAS317
132 CLIP IN 40MM
DOOR STOP
PAS314
132 PLASTERBOARD
POCKET
CAPPING/FRAME
PAS313/A 13MM
ADJUSTABLE MULTI PLASTERBOARD
TRACK A (144-176MM) LINING
13MM
PLASTERBOARD
LINING
PAS313/A
ADJUSTABLE MULTI
TRACK A (144-176MM) 13MM
PLASTERBOARD
LINING
PAS313/A PAS313/B
ADJUSTABLE MULTI ADJUSTABLE MULTI
TRACK A (144-176MM) TRACK B (144-176MM)
PAS321
132 GLAZING SILL
TRANSOM
PAS320
132 GLAZING BEAD
PAS317
132 CLIP IN 40MM
DOOR STOP
PAS504
GLAZING BEAD
PAS320 PAS320
GLAZING BEAD 132 GLAZING BEAD
PAS504
GLAZING BLOCK GLAZING GASKET GLAZING WEDGE
GLAZING BEAD
PAS504
GLAZING BLOCK GLAZING BEAD
PAS 505 100
100MM MID RAIL
PAS 505 45 PAS504
45MM MID RAIL GLAZING BEAD
PAS504/B
GLAZING BLOCK GLAZING BEAD
PAS 505 100
100MM MID RAIL
PAS 505 45 PAS504/B
45MM MID RAIL GLAZING BEAD
PAS504 PAS504/B
GLAZING BEAD GLAZING BEAD
GLAZING PANEL
GLAZING PANEL
GLAZING PANEL
GLAZING PANEL
PAS504 PAS504/B
GLAZING BLOCK GLAZING BEAD GLAZING BLOCK GLAZING BEAD
WELLINGTON
43 Hutt Road, Petone
PO Box 33 338, Petone, Lower Hutt 5046
Phone 04 568 8855
Fax 04 568 8840
CHRISTCHURCH
37 Kingsley Street, Sydenham, Christchurch 8023
PO Box 12244, Beckenham, Christchurch
Phone 03 338 8763
Fax 03 338 0680
0800 POTTERS
www.potters.co.nz
info@potters.co.nz