The document discusses different bridge circuit configurations including uncontrolled, fully-controlled, and half-controlled. It describes the full-wave bridge circuit layout and how it uses two half-wave circuits in series to form the full-wave connection. The document also discusses constructing voltage waveforms for the bridge circuit with reference to a midpoint neutral and how the peak reverse diode voltage is half the value compared to a half-wave connection.
The document discusses different bridge circuit configurations including uncontrolled, fully-controlled, and half-controlled. It describes the full-wave bridge circuit layout and how it uses two half-wave circuits in series to form the full-wave connection. The document also discusses constructing voltage waveforms for the bridge circuit with reference to a midpoint neutral and how the peak reverse diode voltage is half the value compared to a half-wave connection.
The document discusses different bridge circuit configurations including uncontrolled, fully-controlled, and half-controlled. It describes the full-wave bridge circuit layout and how it uses two half-wave circuits in series to form the full-wave connection. The document also discusses constructing voltage waveforms for the bridge circuit with reference to a midpoint neutral and how the peak reverse diode voltage is half the value compared to a half-wave connection.
The bridge (full-wave or double-way) connection can be arranged to be either uncontrolled, fully-controlled, or half-controlled configurations We will describe each connection in turn. The bridge (full-wave or double-way) connection can be arranged to be either The same circuit drawn to a different diagrammatic layout as in Fig. 2-7b shows clearly the concept of two half-wave circuits in series making the full-wave connection, two diodes with common cathodes feeding into the load Two diodes with common anodes returning the load current to the other supply line. However, the layout of Fig. 2-7b is rather cumbersome, and for power applications the layout of Fig. 2-7c is used. In constructing the voltage waveforms, some circuit reference must be used and in this respect one can construct the supply waveforms with reference to a mid- point neutral N as shown in Fig. 2-7d, thus enabling a comparison to be made to the half-wave circuit of Fig. 2-5
The diode voltage VD1 has a peak reverse
value of the maximum value of the supply voltage, this being only half the value in the half-wave connection Class Activity Given the following Vs and firing angles draw VL IL I1 I2 I3 I4 Is and Vt1 Assignemnt No 2 Draw the waveforms and explain the working of the half controlled circuit as shown in the figure.