Professional Documents
Culture Documents
CONTENTS SUMMARY
Pages
ARTICLE 1 : DEFINITIONS 6-8
1.1 Formula One Car
1.2 Automobile
1.3 Land Vehicle
1.4 Bodywork
1.5 Wheel
1.6 Complete wheel
1.7 Automobile Make
1.8 Event
1.9 Weight
1.10 Cubic capacity
1.11 Pressure charging
1.12 Cockpit
1.13 Sprung suspension
1.14 Survival cell
1.15 Camera
1.16 Camera housing
1.17 Cockpit padding
1.18 Brake caliper
1.19 Electronically controlled
1.20 Open and closed sections
1.21 Power train
1.22 Power unit
1.23 Engine
1.24 Energy Recovery System (ERS)
1.25 Motor Generator Unit - Kinetic (MGU-K)
1.26 Motor Generator Unit - Heat (MGU-H)
1.27 Energy Store (ES)
1.28 Compressor inlet
1.29 Compressor outlet
DRAWINGS
This Appendix permits modification of the homologated Power Unit within the homologation period laid out in Article 28.5 of the F1 Sporting
Regulations and in accordance with the process described in the Appendix 4 of the F1 Sporting Regulations :
a) For the purposes of this Appendix only, the Power Unit is divided into functions as shown in Table 1 above; each function is named and
allocated the number of Tokens as shown.
b) Functions may be modified according to this Appendix up to the quota of Tokens allowed for modifications for the Championship in the
year shown in Table 2.
c) If a function named in Table 1 is modified thus consuming its allocated Tokens, direct consequential modifications to parts outside the
function description may be modified. Provided that the FIA is satisfied, in its absolute discretion, that there is no favourable performance
effect outside the initially modified function, these consequential modifications may be implemented without using further tokens.
d) Tokens allocated in Table 2 for a particular calendar year may be spent at any time during that calendar year. Tokens may be spent several
times on the same function.