Table 12.2.4 Applications of isolating valve types
applications.
Hydraulic actuator
Valve type Genoral applications Actuation Remarks
Usually manual, but may be:) Usually applied to higher
Shut-off regulation : tne ’ poate . high ‘one
Globe valve oud / ges fw, - Manual systems, due to cost.
Steam and condensate | Hvdrauic Less suitable for viscous
applications, - Pneumatic or contaminated fluids,
Used fully open or fully
closed for on/of regulation] Usually manual, but may be| Suely used where the
; onsteam, gas and other |- Electric valve beat isto be
Piston valve fluid services. Typical |- Manual permanently installed and
used on fuids that cause |- Hydraulic maintenance needs to
excessive seat weer, be minimised,
Not recommended as
Normally used fly open Usually manual, but may be:) throttling valve. Solid
Gate valve orfully closed for on/off | Elctrig ‘wedge gate is free from
regulation on water, ol, |. Manual chatter and jamming,
(gs, steam and other fd |. ic Parallel slide valve used in
services. steam systems.
Relatively simple
Shut-off and regulation in| Handwhee! construction. Can be
larger pipelines in Electri¢: motor produced in very large sizes.
Butterfly valve waterworks, process Pheumatic actuator Eccentric design essential
industries, HPI, power | Hydraulic actuator for steam systems,
generation. Air motor Typically used on liquid
systems,
Wide range of applications | Handwhee! .
bal Yeive inal ies, including HP. | Electric motor Can hand al id types,
Steam and condensate | Pheumatic actuator Lite! maximum pressure
rating.