Professional Documents
Culture Documents
NPN Silicon
BC550B,C
MAXIMUM RATINGS
Rating Symbol BC549 BC550 Unit
CollectorEmitter Voltage VCEO 30 45 Vdc
CollectorBase Voltage VCBO 30 50 Vdc
EmitterBase Voltage VEBO 5.0 Vdc
Collector Current Continuous IC 100 mAdc
Total Device Dissipation @ TA = 25C PD 625 mW 1
2
Derate above 25C 5.0 mW/C 3
THERMAL CHARACTERISTICS
Characteristic Symbol Max Unit COLLECTOR
1
Thermal Resistance, Junction to Ambient RJA 200 C/W
Thermal Resistance, Junction to Case RJC 83.3 C/W
2
BASE
3
EMITTER
OFF CHARACTERISTICS
CollectorEmitter Breakdown Voltage V(BR)CEO Vdc
(IC = 10 mAdc, IB = 0) BC549B,C 30
BC550B,C 45
CollectorBase Breakdown Voltage V(BR)CBO Vdc
(IC = 10 Adc, IE = 0) BC549B,C 30
BC550B,C 50
EmitterBase Breakdown Voltage V(BR)EBO 5.0 Vdc
(IE = 10 Adc, IC = 0)
Collector Cutoff Current ICBO
(VCB = 30 V, IE = 0) 15 nAdc
(VCB = 30 V, IE = 0, TA = +125C) 5.0 Adc
Emitter Cutoff Current IEBO 15 nAdc
(VEB = 4.0 Vdc, IC = 0)
ON CHARACTERISTICS
DC Current Gain hFE
(IC = 10 Adc, VCE = 5.0 Vdc) BC549B/550B 100 150
BC549C/550C 100 270
(IC = 2.0 mAdc, VCE = 5.0 Vdc) BC549B/550B 200 290 450
BC549C/550C 420 500 800
CollectorEmitter Saturation Voltage VCE(sat) Vdc
(IC = 10 mAdc, IB = 0.5 mAdc) 0.075 0.25
(IC = 10 mAdc, IB = see note 1) 0.3 0.6
(IC = 100 mAdc, IB = 5.0 mAdc, see note 2) 0.25 0.6
BaseEmitter Saturation Voltage VBE(sat) 1.1 Vdc
(IC = 100 mAdc, IB = 5.0 mAdc)
BaseEmitter On Voltage VBE(on) Vdc
(IC = 10 Adc, VCE = 5.0 Vdc) 0.52
(IC = 100 Adc, VCE = 5.0 Vdc) 0.55
(IC = 2.0 mAdc, VCE = 5.0 Vdc) 0.55 0.62 0.7
SMALLSIGNAL CHARACTERISTICS
CurrentGain Bandwidth Product fT 250 MHz
(IC = 10 mAdc, VCE = 5.0 Vdc, f = 100 MHz)
CollectorBase Capacitance Ccbo 2.5 pF
(VCB = 10 Vdc, IE = 0, f = 1.0 MHz)
SmallSignal Current Gain hfe
(IC = 2.0 mAdc, VCE = 5.0 V, f = 1.0 kHz) BC549B/BC550B 240 330 500
BC549C/BC550C 450 600 900
Noise Figure dB
(IC = 200 Adc, VCE = 5.0 Vdc, RS = 2.0 k, f = 1.0 kHz) NF1 0.6 2.5
(IC = 200 Adc, VCE = 5.0 Vdc, RS = 100 k, f = 1.0 kHz) NF2 10
NOTES:
1. IB is value for which IC = 11 mA at VCE = 1.0 V.
2. Pulse test = 300 s Duty cycle = 2%.
RS
in
en
IDEAL
TRANSISTOR
http://onsemi.com
2
BC549B,C BC550B,C
2.0 1.0
VCE = 10 V 0.9 TA = 25C
hFE, NORMALIZED DC CURRENT GAIN
1.5
TA = 25C
0.8
VBE(sat) @ IC/IB = 10
1.0 0.7
V, VOLTAGE (VOLTS)
VBE(on) @ VCE = 10 V
0.8 0.6
0.6 0.5
0.4
0.4 0.3
0.3 0.2
VCE(sat) @ IC/IB = 10
0.1
0.2 0
0.2 0.5 1.0 2.0 5.0 10 20 50 100 200 0.1 0.2 0.5 1.0 2.0 5.0 10 20 50 100
IC, COLLECTOR CURRENT (mAdc) IC, COLLECTOR CURRENT (mAdc)
10
400
300
7.0
200 TA = 25C
Cib
C, CAPACITANCE (pF)
5.0
100
80 VCE = 10 V
TA = 25C 3.0
60
Cob
40
30 2.0
20
1.0
0.5 0.7 1.0 2.0 5.0 7.0 10 20 50 0.4 0.6 1.0 2.0 4.0 10 20 40
IC, COLLECTOR CURRENT (mAdc) VR, REVERSE VOLTAGE (VOLTS)
170
r b, BASE SPREADING RESISTANCE (OHMS)
160
150
VCE = 10 V
f = 1.0 kHz
140
TA = 25C
130
120
0.1 0.2 0.5 1.0 2.0 5.0 10
IC, COLLECTOR CURRENT (mAdc)
http://onsemi.com
3
BC549B,C BC550B,C
PACKAGE DIMENSIONS
CASE 02904
(TO226AA)
ISSUE AD
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
A Y14.5M, 1982.
B 2. CONTROLLING DIMENSION: INCH.
3. CONTOUR OF PACKAGE BEYOND DIMENSION R
IS UNCONTROLLED.
R 4. DIMENSION F APPLIES BETWEEN P AND L.
DIMENSION D AND J APPLY BETWEEN L AND K
P MINIMUM. LEAD DIMENSION IS UNCONTROLLED
IN P AND BEYOND DIMENSION K MINIMUM.
L
SEATING F
PLANE K INCHES MILLIMETERS
DIM MIN MAX MIN MAX
A 0.175 0.205 4.45 5.20
D B 0.170 0.210 4.32 5.33
C 0.125 0.165 3.18 4.19
J D 0.016 0.022 0.41 0.55
X X F 0.016 0.019 0.41 0.48
G G 0.045 0.055 1.15 1.39
H H 0.095 0.105 2.42 2.66
SECTION XX J 0.015 0.020 0.39 0.50
V C K 0.500 --- 12.70 ---
L 0.250 --- 6.35 ---
N 0.080 0.105 2.04 2.66
1 N P --- 0.100 --- 2.54
R 0.115 --- 2.93 ---
N V 0.135 --- 3.43 ---
STYLE 17:
PIN 1. COLLECTOR
2. BASE
3. EMITTER
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes
without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular
purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability,
including without limitation special, consequential or incidental damages. Typical parameters which may be provided in SCILLC data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including Typicals must be
validated for each customer application by customers technical experts. SCILLC does not convey any license under its patent rights nor the rights of others.
SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or
death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold
SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable
attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim
alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer.
http://onsemi.com BC549B/D
4