AASHTOIAWS D1.5WWD1.5:2015,
Annex P (Informative)
Reference Documents
‘This annex is not part of AASHTO/AWS D1.SMIDL.S:2015, Bridge Welding Code,
but is included for informational purposes only.
American Association of State Highway and Transporta-
tion Officials (AASHTO) documents:*
AASHTO Guide Specifications for Highway Bridge
Fabrication with HPS TOW (HPS 485W) Steel
AASHTO Standard Specification for Highway Bridges
AASHTO LRFD Bridge Design Specifications
AASHTO M270M/M270, Standard Specification for
Structural Steel Bridges
AASHTO 244, Standard Method of Test for Me-
chanical Testing of Steel Products
American Welding Society (AWS) documents:?
AWS A24, Symbols for Welding, Brazing, and Non-
destructive Examination
AWS A3.0, Standard Welding Terms and Definitions
AWS AS.OLM/A5.01:2013 (ISO 14344:2010 MOD),
Welding Consumables—Procurement of Filler Metals
and Fluxes
AWS AS.I/AS.IM, Specification for Carbon Steel
Electrodes for Shielded Metal Are Welding
AWS AS.SIAS.SM, Specification for Low-Alloy Steel
Electrodes for Shielded Metal Are Welding
1, AASHTO documents are published by the American Associ-
ation of State Highway and Transportation Officials, 444 N.
Capitol Street NW, Suite 249, Washington, DC 20001
2. AWS documents are published by the American Welding
Society, 8669 NW 36 St, # 130, Miami, FL. 33166.
293
AWS AS.IT/AS.17M, Specification for Carbon Steel
Electrodes and Fluxes for Submerged Arc Welding
AWS AS.I/A5.18M, Specification for Carbon Steel
Electrodes and Rods for Gas Shielded Are Welding
AWS AS.20/A5.20M, Specification for Carbon Steel
Electrodes for Flux Cored Are Welding
AWS A5.23/A5.23M, Specification for Low-Alloy
Steel Electrodes and Fluxes for Submerged Are Welding
AWS A5.25/A5.25M, Specification for Carbon and
Low-Alloy Steel Electrodes and Fluxes for Electroslag
Welding
AWS AS.26/A5.26M, Specifications for Carbon and
Low-Alloy Steel Electrdes for Electrogas Welding
AWS A5.28/A5.28M, Specification for Low-Alloy
Steel Electrodes and Rods for Gas Shielded Are Welding
AWS A5.29/A5.29M, Specification for Low-Alloy
Steel Electrodes for Flux Cored Arc Welding
AWS B40, Standard Methods for Mechanical Test-
ing of Welds
AWS C4.1-G, Oxygen Cutting Surface Roughness
Gauge
AWS C54, Recommended Practices for Stud Welding
AWS D1.UDI.IM, Structural Welding Code—Steel
AWS D1.3/D13M, Structural Welding Code—Sheet
Steel
AWS QC1, Standard for AWS Certification of Weld-
ing Inspectors
AWS Welding Handbook, Volume 1
Chapter 11
8th Baition,ANNEX
American National Standards Institute (ANSI) document)
ANSI 249.1, Safety in Welding, Cutting, and Allied
Processes
American Society of Mechanical Engineers (ASME)
documents:*
ASME B46.1, Surface Texture (Surface Roughness,
Waviness, and Lay)
ASME Boiler and Pressure Vessel Code, Section V.
Amicle 2
American Society for Nondestructive Testing (ASNT)
document*
ASNT Recommended Practice No. SNT-TC-1A, Per-
sonnel Qualification and Certification in Nondestructive
Testing
ASTM International (ASTM) documents
ASTM AGIAGM, Standard Specification for General
Requirements for Rolled Structural Steet Bars, Plates,
Shapes, and Sheet Piling
ASTM A108, Standard Specification for Stee! Bar
Carbon, and Alloy, Cold-Finished
ASTM A370, Standard Test Methods and Definitions
for Mechanical Testing of Steel Products
ASTM AABS/A435M, Standard Specification for
Straight-Beam Ultrasonic Examination of Steel Plates
ASTM. A709/A709M, Standard Specification for
Structural Steel Bridges
ASTM. ATTU/ATIOM, Standard Specification for
Through-Thickness Tension Testing of Steel Plates for
Special Applications
ASTM E23, Standard Methods for Notched Bar In-
pact Testing of Metallic Materials
3. This ANSI document is published by the American Welding
Soviety, $669 NW 36 St, # 130, Miami, FL. 33166.
4, ASME documents are published by the American Society of|
Mechanical Engineers, Two Park Avenue, New York, NY
10016-5990,
5. This ASNT document is published by the American Society
for Nondestructive Testing, PO. Box 28518, 1711 Adingate
Lane, Columbus, OH 43228-0518.
66. ASTM Intemational documents are published by ASTM
International, 100 Barr Harbor Drive, West Conshohocken, PA.
19428-2959,
294
AASHTOIAWS D1.5WD1.5:2015,
ASTM E94, Standard Guide for Radiographic
Examination
ASTM E140, Standard Hardness Conversion Tables
for Metals
ASTM E164, Standard Practice for Contact Ultra.
sonic Testing of Weldments
ASTM E165, Standard Practice for Liquid Penetrant
Examination for General Industry
ASTM E317, Standard Practice for Evaluating Per-
{formance Characteristics of Ulmasonic Pulse-Echo Test-
ing Instruments and Systems without the Use of
Electionic Measurement Instruments
ASTM E384, Standard Test Method for Knoop and
Vickers Hardness of Materials
ASTM E709, Standard Guide for Magnetic Particle
Testing
ASTM E747, Standard Practice for Design, Manu-
facture, and Material Grouping Classification of Wire
Image Quality Indicators (IQ1) Used for Radiology
ASTM E1025, Standard Practice for Design, Manu-
facture, and Material Grouping Classification of Hole-
Type Image Quality Indicators (101) Used for Radiography
ASTM E1032, Standard Test Method for Radio-
{graphic Examination of Weldments
CSA Group (CSA) document?
Canadian Standard Association (CSA) Standard
WI78.2, Certification of Welding Inspectors
Intemational Institute of Welding (LIW) document’
‘The International Institute of Welding (IW) Ultra-
sonic Reference Block
Other document:
Fracture and Fatigue Control in Structures—Applica-
tions of Fracture Mechanics, Barsom and Rolfe, Pren-
tice-Hall Ine,
7. This CSA document is published by the CSA Group, 178
Rexdale Boulevard, Toronto, ON, CANADA MOW 1R3.
8, This IW document is published by the International Insite
of Welding, BP $1362 ~ Villepinte, 95 942 Roissy Ch de Gaulle
Cedex, FRANCE.