Pidilite
Dear Friend,
Picilte Industries Ltd. has been associated with you through different products,
Fevicol Furniture Books, Upholstery Books etc. since long. "BOND" - has become
synonymous with Pidilite Industries Limited - Makers of Fevicol brand of Adhesives.
This philosophy is now beautifully expressed with our simple yet dynamic new
corporate logo. The golden circle represents the Sun and the blue stroke suggests,
the surface ofthe Earth
(Our Fevicol logo has also been redesigned to give afresh and contemporary ook.
In an intative to serve you better, we are introducing Pidllite's Product Guide for
Architects and Interior Designers. While designing/constructing building or for
the interior, it requires various products for different needs. Pidiite Industries ltd
has range of products to cater to all your requirements, Pidilite's Product Guide
has consolidated information on all our products which you will need in your day to
day work. ic. Adhesives for Woodworking and Foam/Upholstery, Wood finish and
Paint products, Water proofing compounds, Sealants and even Repair products.
Picilte's Product Guide will serve as a ready reckoner to all of you. The book has been.
compiled taking proper care to cover all the areas. We will be pleased to reply on any
queries which we have missed out. Feel free to write your comments and suggestions
‘0 improve it further
We sincerely hope that Pidilte Product Guide will be of great help to you in getting
complete information related to your work.
For more information, please log on to www-pidilite.com or www.fevicol.com
Bonded For Life -Yes We Are
From the team of Pidilite Industries Lt.‘THE ULTIMATE ADHESIVE
Fevicol Synthetic Resin Adhesives were the first ofits kind to be manufactured in India in 1958. Today
Fevicol has become synonymous with strong bond in wood and furniture industry
Fevicol SH iso Synthetic Resin Adhesive inthe form ofa milky white viscous paste ands ready to use
Fevicol SH gives very strong bond. The bond is so strong that if two wooden pieces ace joined with
Fevicol SH and a hammeris hit heavily, the wood wil give way but not the Fevicol bond,
FEATURES USES
+ Unsurpassed bonding strength + For bonding wood, plywood, laminates,
veneers, particle board, block board/
+ Economical in long un, hard board, MDF to each other.
+ Gives higher coverage. + Pencil mi. sports goods, paper
labeling paper tube, wal paper,
compet mig
+ Aso recommended for bonding any two
‘material where at least one of them is
porous eg, paper, cardboard, particle
board etc. Other related applications.
«Resistant to water and heat
HOWTO APPLY:
Fevicol SH can be applied with brush, roller, spreader or fingers. The usual procedure o be followed is
+ Clean both the surfaces to be bonded.
+ Apply a thin coat of Fevicol SH on bath or one surface (as per requirement)
+ Press the two surfaces together and keep under pressure tl the adhesive dries completly
Excess adhesive pressed outside the joints should be wiped out with a wet cloth
mane | SO ES.
In Plastic containers SOgms, 125gms, 250gms, SOOgms, 1kg, 2kg, kg and 10kg
In Carboys 20kg, 30k, SOkg
Woodworking‘SAVETIME, GET MORE BUSINESS!
For the first ime in india, a revolutionary adhesive which can save time and increase productivity
FEATURES : USES:
+ Gives handling strength in 2 hours. + Intime bound projets
+ Forbonding wood, plywood, laminates veneers,
particle board, block board/hard board, MDF to
cach other.
+ Saves time - more productivity,
+ Saves labour: cost effective
+ Resistant to water and heat.
HOWTO APPLY
+ Moke sure the surfaces to be bonded are property
cleaned and free from dust, dirt, ol ete.
+ Apply Fevico! Speedx on both the surfaces to be bonded,
In case one surface is more porous than other,
the adhesive should be applied frst on the less porous surface,
+ Fisish applying the adhesive and pressing ofthe surfaces
tobe bonded within 10 minutes.
+ Keep the bonded surfaces under pressure with tape, nal ete
The bonded surfaces achieve handling strength in ust 1. to 2 hours,
+ Time to achieve bonding strength depends on the erwironmertal
conedtons
Woodworking
PACKING
In Plastic Containers th, 2kg, Skg and 10kg,
In Carbays 20k and SOkg.
Pt
FEVICOL
SPEEDX.SUPERIOR WATER RESISTANT ADHESIVE,
FIRSTTIME IN INDIA
‘As we all know a piece of furniture undergoes lot of stress due to change in weather/moisture/infrequent and
continuous exposure to water. This may result in opening of joints and debonding of laminates inspite of using
.g00¢ quality material eg. Marine plywood.
+ Fevicol Marine is specially designed for bonding in furniture, which is exposed to water or placed in high
humidity areas.
FEATURES : USES:
+ 48 hour continuous water resistance + For bonding wood, plywood, laminates,
+ Thourboting water resistance veneers, particle board, block board/
+ Superior bonding in Marine plywood hard board, MDF to each other
+ Higher Coverage + Kitchen units, wall units, bathroom where exposure to
wateris high
+ Peneil mfg. sports goods, paper
labeling paper tube, wall paper,
compet mig,
+ Also recommended forbbonding any two
material where at least one of them is
porous eg paper, card board, particle
board etc. Other related applications.
Woodworking
HOWTO APPLY:
Fevicol Marine can be applied wih brush role, spreader or fingers, The usual procedure to be flowed is
+ Clean both the surfaces to be bonded.
+ Apply thin coat of Fevicol Marine on both orone surface (as per requirement)
+ ress the two surfaces together and keep under pressure tl the adhesive dries completly.
Excess adhesive pressed outside the joints should be wiped out with a wet cloth
PACKING
In Plastic Containers Thg, 2kg, Skg and 10kg, | zu
In Corboys 20kg, SokgINDIA'S FIRST WOOD REINFORCED ADHESIVE
For the first time in India, Pidite presents Fevicol WRA, a wood reinforced adhesive containing wood particles.
Thisis high quality and technologically advanced adhesive. Since itcontains wood particles, the resultant bond is
extremely strongto make yourfurniturelstalife time.
FEATURES :
+ Contains wood particle
+ 10% - 15% more coverage
+ Lends 2 matching fash to
wwood/lywood due its colour
resemblance to them.
HOWTO APPLY:
Uses:
+ For bonding wood, plywood, laminates,
veneers, particle board, block board/
hard board, MDF to each other
+ Also recommended for bonding any two
‘material where at least one of them is
porous eg. paper, cardboard, particle
board etc. And other related applications.
Woodworking
Fevicol WRA can be applied with brush roller, spreader or ingers. The usual procedure to be followed is:
+ Clean bath the surfaces to be bonded.
+ Apply thin coat of Fevicol WRA con both or one surface (as per requirement)
+ Press the two surfaces together and keep under pressure tl the adhesive dries completly
Fxcess adhesive pressed outside the joints should be wiped outwith a wet cloth
PACKING :
In Plastic Containers The, 2kg, Skg and 10kg,
In Carboys 20kg, SOkgWood Grip -"CHHUTE NA KHABHITis a high viscosity adhesive with an advantage of better grab.
Because a its unique 'WOODGRIP WITH A TIGHT GRIP” feature grip remain tl the end,
FEATURES :
+ High viscous adhesive ~ symbol of strength
+ 10-15% more coverage
+ Attractive International packoging
+ Better grip
HOWTO APPLY
WOODGRIP can be applied with brush, rae,
spreader or fingers.The usual procedure to be
followedis:
+ Clean both the surfaces tobe bonded.
+ Apply WOODGRIP on bothe the suroces to be
bonded
+ Apply a thin coat of WOODGRIP on both or one
surface (as perrequirement)
+ Press the two surfaces together and keep under
pressurewith ape nate
+ Adhesive spread outside the joints should be
wiped outwit awe cloth
1) FEVITITE EPX.
PACKING
In plastic Containers 1 kg, 2kg. 5 kg, 10 kg.
In Carboys 20 kg & 50 kg.
Uses
For bonding wood, plywood, laminates and veneers,
patticle board, Block board, Hardboard, MDF to each
‘of the substrates,
Peneil mig, Sports goods, paper labeling, paper
‘Tube, Wall Paper & Wooden Flooring.
Woodworking,ADHESIVE WITH HIGH INITIAL TACK
Me. Bond HIT is a quality adhesive with the advantage of high inital tack. This allows Mr. Bond HIT to have.
2 faster grab on the substrates thereby reducing the need forrepeated pressing, This feature of Mr. Bond HIT
also makes iteffective onVertical Application.
FEATURES : uses
+ Adhesive with specialized HIT (High inital Tack) + For bonding wood, plywood, laminates,
formulation veneers, particle board, block board/hard
+ Faster Drying board, MDFto each other.
+ Special formulation fora better coverage / + Excellentbondingin Vertical Applications
spreadabilty + Also recommended for bonding any two
+ New International Packing material where at least one of them is porous
eg. paper, card board, particle board etc.
and other elated applications.
HOWTO APPLY
Mr. Bond HIT can be applied with brush, roller, spreaderorfingers. The usual procedure tobe followedis:
+ Clean both the surfacesto be bonded.
+ Apply thin coat of Mr. Bond HITon both orone surface (as perrequirement)
+ Press the two surfaces togetherand keep under pressure tithe adhesive dries completely.
Excess adhesive pressed outside the joints should be wiped out witha wet cloth.
Woodworking,
PACKING
InPlastic Containers 1kg, 2kg, Skgand 10kg
InCarboys 20kgand 50kg
7)
ond
Sim