Professional Documents
Culture Documents
Owner'S Manual: Online Edition For Part No. 01 41 2 601 123 - © 08/08 BMW AG
Owner'S Manual: Online Edition For Part No. 01 41 2 601 123 - © 08/08 BMW AG
A-Z
OWNER'S MANUAL
MINI
AT A GLANCE
page 146.
AT A GLANCE
10 Cockpit
CONTROLS
CONTROLS
18 Opening and closing
29 Adjustments
35 Transporting children safely
37 Driving
47 Everything under control
56 Technology for driving comfort and safety
67 Lamps
DRIVING TIPS
72 Climate
77 Practical interior accessories
DRIVING TIPS
84 Things to remember when driving
MOBILITY
92 Refueling
94 Wheels and tires
103 Under the bonnet MOBILITY
107 Maintenance
109 Care
113 Replacing components
123 Giving and receiving assistance
128 Indicator and warning lamps
REFERENCE
142 Technical data
REFERENCE
146 From A to Z
3
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Notes
Notes
Editorial notice
Symbols used
The manufacturer pursues a policy of continu-
Indicates precautions that must be fol-
ous, ongoing development that is conceived to
lowed precisely in order to avoid the pos-
ensure that MINI vehicles continue to embody
sibility of personal injury and serious damage to
the highest quality and safety standards com-
the vehicle.<
bined with advanced, state-of-the-art technol-
Indicates information that will assist you in ogy. For this reason, it is possible in exceptional
gaining the optimum benefit from your cases that features described in this Owner's
vehicle and enable you to care more effectively Manual could differ from those on your vehicle.
for your vehicle.<
Refers to measures that can be taken to
help protect the environment.< For your safety
< Marks the end of a specific item of information.
* Indicates special equipment, country-specific Maintenance and repair
equipment and optional extras, as well as equip- Advanced technology, e.g. the use of
ment and functions not yet available at the time modern materials and powerful electron-
of printing. ics, requires specially adapted maintenance and
repair methods. Therefore, have the necessary
Symbols on vehicle components work on your MINI only carried out by a MINI
Indicates that you should consult the rele- Dealer or a workshop that has specially trained
vant section of this Owner's Manual for personnel working in accordance with the spec-
information on a particular part or assembly. ifications of the MINI manufacturer. If this work
4
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
is not carried out properly, there is a danger of Maintenance, replacement, or repair of
subsequent damage and related safety haz- the emission control devices and systems
ards.< may be performed by any automotive repair
establishment or individual using any certified
Parts and accessories automotive part.<
AT A GLANCE
For your own safety, use genuine parts
and accessories approved by the manu- California Proposition 65 warning
facturer of the MINI. California law requires us to issue the following
When you purchase accessories tested warning:
and approved by the manufacturer of the MINI Engine exhaust and a wide variety of
and Original MINI Parts, you simultaneously automobile components and parts,
acquire the assurance that they have been thor- including components found in the interior fur-
oughly tested by the manufacturer of the MINI nishings in a vehicle, contain or emit chemicals
to ensure optimum performance when installed known to the State of California to cause cancer
CONTROLS
on your vehicle. and birth defects and reproductive harm. In
The manufacturer of the MINI warrants these addition, certain fluids contained in vehicles and
parts to be free from defects in material and certain products of component wear contain or
workmanship. emit chemicals known to the State of California
to cause cancer and birth defects or other repro-
The manufacturer of the MINI will not accept any
ductive harm.
liability for damage resulting from installation of
parts and accessories not approved by the man- Battery posts, terminals and related accessories
ufacturer of the MINI. contain lead and lead compounds. Wash your
hands after handling.
The manufacturer of the MINI cannot test every
DRIVING TIPS
product made by other manufacturers to verify Used engine oil contains chemicals that have
if it can be used on a MINI safely and without risk caused cancer in laboratory animals. Always
to either the vehicle, its operation, or its occu- protect your skin by washing thoroughly with
pants. soap and water.<
ity of the MINI Limited Warranty. See your MINI Detailed information about these warranties is
Dealer for additional information.< listed in the Service and Warranty Information
Booklet for US models or in the Warranty and
Service Guide Booklet for Canadian models.
5
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Reporting safety defects
Notes
For US customers
The following applies only to vehicles owned
and operated in the US.
If you believe that your vehicle has a defect which
could cause a crash or could cause injury or death,
you should immediately inform the National
Highway Traffic Safety Administration, NHTSA, in
addition to notifying MINI of North America, LLC,
P.O. Box 1227, Westwood, New Jersey 07675-
1227, Telephone 1-800-831-1117.
If NHTSA receives similar complaints, it may
open an investigation, and if it finds that a safety
defect exists in a group of vehicles, it may order
a recall and remedy campaign. However, NHTSA
cannot become involved in individual problems
between you, your dealer, or MINI of North
America, LLC.
To contact NHTSA, you may call the Vehicle
Safety Hotline toll-free at 1-888-327-4236
(TTY: 1-800-424-9153);
go to http://www.safercar.gov; or write to:
Administrator, NHTSA, 400 Seventh Street, SW.,
Washington, DC 20590. You can also obtain
other information about motor vehicle safety
from http://www.safercar.gov
6
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
AT A GLANCE
CONTROLS
DRIVING TIPS
MOBILITY
REFERENCE
7
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
AT A GLANCE
AT A GLANCE
CONTROLS
DRIVING TIPS
MOBILITY
REFERENCE
Turn signals 41
10
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
3 Tachometer 12
Instrument lighting 70
AT A GLANCE
4
Wiper system 42
6 Ignition lock 37
Buttons* on steering wheel
CONTROLS
7
Continuing cruise control* 45
Right:
Storing speed and accelerating or
decelerating
Left:
Volume
DRIVING TIPS
Activating/deactivating cruise
control* 45
Telephone*:
Accepting and ending a call, start-
ing dialing* of selected phone
number and redialing if no phone
number is selected
11
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Displays
Cockpit
> Indicator and warning lamps 13 > Initializing the Flat Tire Monitor* 59
3 Resetting the trip odometer 47 > Resetting the Tire Pressure Monitor* 61
> Settings and information 49
> Personal Profile settings 18
5 Instrument lighting 70
6 Speedometer
with indicator and warning lamps 13
7 Fuel gauge 48
8 Radio display, refer to separate Owner's
Manual
9 Radio, refer to separate Owner's Manual
12
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Indicator and warning
lamps
The concept
AT A GLANCE
CONTROLS
Indicator and warning lamps can light up in various
combinations and colors in indicator area 1 or 2.
Some lamps are checked for proper functioning
and thus come on briefly when the engine is
started or the ignition is switched on.
DRIVING TIPS
on how to respond, can be found starting on
page 128.
MOBILITY
REFERENCE
13
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Around the center console
Cockpit
14
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
1 Microphone for voice command system* Automatic air distribution and flow
and for telephone in hands-free mode* rate* 75
2 Indicator/warning lamp* for front passen-
ger airbags 65 Maximum cooling* 75
AT A GLANCE
Reading lamps* 70 Cooling function 73, 76
CONTROLS
4 Hazard warning flashers
5 Speedometer 12
9 Switches in center console
6 Drive for audio CDs
7 Switching audio sources on/off and adjust- Seat heating* 32
ing volume
8 Air conditioner or automatic climate con- Power windows 28
trol*
Rear fog lamp* 70
Temperature 73, 75
DRIVING TIPS
Central locking system, inside 22
Recirculated-air mode 73, 75
Automatic recirculated-air control Fog lamps* 70
AUC* and recirculated-air
mode 75
Air distribution for air 10 AUX-In port, USB-audio interface* 79
conditioner 74 11 Driving stability control systems
Air distribution to the > Dynamic Stability Control DSC 57
windshield* 75 MOBILITY
> Dynamic Traction Control DTC* 58
Air distribution to the upper body
12 Sport button* 59
area* 75
15
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
AT A GLANCE
CONTROLS
CONTROLS
DRIVING TIPS
MOBILITY
REFERENCE
New remote controls At most three remote controls can be set for
three different people. A prerequisite is that
Your MINI Dealer can supply new remote con-
each person uses a separate remote control.
trols as additional units or as replacements in the
event of loss.
Personal Profile settings
For more information on specific settings, refer
to the specified pages.
> Response of the central locking system
when the car is being unlocked 19
> Automatic locking of the vehicle 23
> Triple turn signal activation 42
18
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
> Settings for the displays on the onboard The anti-theft system is also operated at the
monitor, in the speedometer and in the same time. It prevents the doors from being
tachometer. unlocked using the lock buttons or door han-
> 12h/24h mode of the clock, refer to For- dles. The remote control can also be used to
mats and units of measure 50 switch on/off the welcome lamps and interior
AT A GLANCE
lamps. The alarm system* is also activated or
> Date format, refer to Formats and units
deactivated (page 24).
of measure 50
> Units of measure for fuel consumption, Operating from inside
distance covered/remaining distances
Button for central locking system, page 22.
and temperature, refer to Formats and
units of measure 50 In the event of a sufficiently severe accident, the
central locking system unlocks automatically. In
> Light settings:
addition, the hazard warning flashers and inte-
> Pathway lighting 67 rior lamps come on.
CONTROLS
> Daytime running lamps 68
> Automatic climate control*: AUTO program,
activating/deactivating cooling function and Opening and closing:
automatic recirculated-air control, setting from outside
temperature, air flow rate and
distribution 74 Persons or animals in a parked vehicle
> Entertainment: could lock the doors from the inside. Take
the key with you when you leave the vehicle so
> Audio volume, refer to separate Owner's that the vehicle can be opened from the out-
Manual
DRIVING TIPS
side.<
> Speed-dependent volume, refer to sepa-
rate Owner's Manual Using the remote control
Unlocking
Central locking system Press the button.
The welcome lamps and interior lamps come on.
The concept
The central locking system is ready for operation Unlocking mode
whenever the driver's door is closed. You can also set which parts of the car are MOBILITY
The system simultaneously engages and unlocked. The setting is stored for the remote
releases the locks on the following: control in use.
> Doors
> Tailgate
> Fuel filler door
19
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
1. Switch on the ignition, refer to page 37. 8. Briefly press the button to select:
Opening and closing
3. Press and hold the button until the display Convenient opening
changes. Hold the button down.
4. Briefly press the button repeatedly until the The power windows are opened and the glass
symbol and "SET" are displayed. sunroof* is raised.
Convenient closing is not possible by
means of the remote control.<
Locking
Press the button.
Do not lock the vehicle from the outside if
there is any person inside, because the
vehicle cannot be unlocked from inside without
special knowledge.<
5. Press and hold the button until the display
Setting confirmation signals
changes.
To have the vehicle confirm when it has been
6. Briefly press the button repeatedly until the
locked or unlocked.
display shows the illustrated symbol, arrow.
1. Switch on the ignition, refer to page 37.
2. Briefly press the button in the turn indicator
lever repeatedly until "SET/INFO" is dis-
played.
20
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
4. Briefly press the button repeatedly until the Switching on interior lamps
symbol and "SET" are displayed. While the car is locked:
Press the button.
You can also use this function to locate your
vehicle in parking garages, etc.
AT A GLANCE
Unlocking the tailgate
Press the button.
When it is opened, the tailgate swings
upward and outward to the rear. Ensure
that there is sufficient clearance.
5. Press and hold the button until the display To prevent accidentally locking yourself out, do
changes. not place the key down in the cargo bay. If the
tailgate was locked before opening, it will be
6. Briefly press the button to select, arrow:
CONTROLS
locked again after it is closed.
> Confirmation signal during unlocking Before and after each trip, check that the tail-
> Confirmation signal during locking gate has not been inadvertently unlocked.<
Malfunctions
The remote control may malfunction due to
local radio waves. If this occurs, unlock and lock
the car at the door lock with the integrated key.
If the car can no longer be locked with a remote
DRIVING TIPS
control, the battery in the remote control is dis-
charged. Use this remote control during an
extended drive; this will recharge the battery,
page 18.
7. Press and hold the button until the display
changes.
For US owners only
8. Briefly press the button to select:
The transmitter and receiver units comply with
> part 15 of the FCC/Federal Communications
The hazard warning flashers light up Commission regulations. Operation is governed
during unlocking/locking. by the following: MOBILITY
The function is deactivated. > This device must not cause harmful interfer-
9. Press and hold the button until the display ence, and
changes. The setting is stored. > This device must accept any interference
received, including interference that may
cause undesired operation.
21
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Any unauthorized modifications or Manual operation
Opening and closing
changes to these devices could void the In the event of an electrical malfunction, the
user's authority to operate this equipment.< driver's door can be unlocked or locked by turn-
ing the integrated key in the door lock to the end
Using the door lock positions.
22
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Automatic locking 7. Press and hold the button until the display
You can also set the situations in which the car changes.
locks. The setting is stored for the remote con- 8. Briefly press the button to select:
trol in use. >
1. Switch on the ignition, refer to page 37. The central locking system automatically
AT A GLANCE
2. Briefly press the button in the turn indicator locks the vehicle after some time if no
lever repeatedly until "SET/INFO" is dis- door has been opened.
played. >
The central locking system automatically
locks the vehicle as soon as you drive off.
>
The central locking system automatically
locks the vehicle after some time if no
door has been opened, or as soon as you
CONTROLS
drive off.
>
The central locking system remains
unlocked.
3. Press and hold the button until the display
changes. 9. Press and hold the button until the display
changes. The setting is stored.
4. Briefly press the button repeatedly until the
symbol and "SET" are displayed.
Tailgate
DRIVING TIPS
To avoid damage, make sure there is suf-
ficient clearance before opening the tail-
gate.<
Opening
In some national-market versions, the tail-
gate cannot be unlocked using the remote
control unless the vehicle is unlocked first.<
5. Press and hold the button until the display MOBILITY
changes.
6. Briefly press the button repeatedly until the
display shows the illustrated symbol, arrow.
REFERENCE
23
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Closing On certain national-market versions,
Opening and closing
Make sure that the closing path of the tail- unlocking via the door lock triggers off the
gate is clear, otherwise injuries may alarm.<
occur.<
Panic mode*
You can activate the alarm system if you find
yourself in a dangerous situation.
Press the button for at least two seconds.
Switching off the alarm:
Press any button.
24
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Tilt alarm sensor Convenient access*
The vehicle's inclination is monitored. The alarm
is triggered, for instance, if an attempt is made Convenient access enables you to enter your
to steal the car's wheels or tow it away. vehicle without having to hold the remote con-
trol in your hand. All you need to do is wear the
AT A GLANCE
Interior movement detector remote control close to your body, e.g. in your
jacket pocket. The vehicle automatically detects
Before the interior movement detector can
the remote control within the immediate vicinity
operate correctly, the windows and glass roof
or in the passenger compartment.
must be closed.
Convenient access supports the following func-
Avoiding false alarms tions:
The tilt alarm sensor and the interior movement > Unlocking/locking the vehicle
detector can be switched off together. > Unlocking the tailgate by itself
This prevents false alarms, e.g. in the following > Enginestarting
CONTROLS
situations: > Convenient operation
> In duplex garages
> When being transported on car-carrying Functional requirements
trains, ferries or trailers > The vehicle or the tailgate can only be
> If pets are to remain inside the car locked when the vehicle detects that the
remote control currently in use is outside of
Switching off the tilt alarm sensor and the vehicle.
interior movement detector > The vehicle cannot be locked or unlocked
DRIVING TIPS
> Press the button on the remote con- again until after approx. 2 seconds.
trol twice in succession. > The engine can only be started when the
> Lock the vehicle twice with the integrated vehicle detects that the remote control is
key. inside the vehicle.
LEDs flash in short succession for approx. 2 sec- > The doors and tailgate must be closed to be
onds. able to operate the windows and glass sun-
The tilt alarm sensor and the interior movement roof.
detector are switched off until the car is next
unlocked and locked. Comparison to standard remote controls
In general, there is no difference between using
MOBILITY
25
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Unlocking Starting the engine
Opening and closing
Press the button on the outside of the tailgate. The vehicle can roll.
26
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Replacing the battery Raising
The remote control for convenient access con- > Press the switch backward to the resistance
tains a battery that will need to be replaced from point and hold it there.
time to time. Both glass sunroofs are raised.
1. Remove the cover. Releasing the switch stops the movement.
AT A GLANCE
> With the ignition switched on, press the
switch backward beyond the resistance
point.
Both closed sunroofs are raised fully.
Pressing again stops the movement.
Opening, closing
With the ignition switched on and the glass sun-
roof raised, press the switch backward and hold
CONTROLS
it there.
2. Insert the new battery with the plus side fac- The front glass sunroof opens.
ing up. The rear glass sunroof is closed.
3. Press the cover on to close. Releasing the switch stops the movement.
Take the old battery to a battery collection The glass sunroof can be closed in the same way
point or to your MINI Dealer.< by pressing the switch forward.
The front glass sunroof remains in a raised posi-
tion. The rear glass sunroof is raised. Pressing on
Glass sunroof, electric* the switch again closes both sunroofs com-
DRIVING TIPS
pletely.
To prevent injuries, exercise care when
Convenient operation via door lock or conve-
closing the glass sunroof and keep it in
nient access, refer to page 20, 22, 26.
your field of vision until it is shut.
Take the key with you when you leave the car,
otherwise children could operate the sunroof Roller sun blind
and possibly injure themselves.< The roller sun blind can be opened and closed
independently of the glass sunroof.
27
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Windows After switching off the ignition
Opening and closing
28
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Adjustments
AT A GLANCE
A correctly adjusted head restraint reduces the
The ideal sitting position can make a vital contri- risk of neck injury in the event of an accident.
bution to relaxed, fatigue-free driving. In con-
Adjust the head restraint in such a way
junction with the safety belts, the head restraints
that its center is at approx. ear level. Oth-
and the airbags, the seated position has a major
erwise, there is an increased risk of injury in the
influence on your safety in the event of an acci-
event of an accident.<
dent. To ensure that the safety systems operate
with optimal efficiency, we strongly urge you to Head restraints, refer to page 31.
observe the instructions contained in the follow-
ing section. Safety belt
CONTROLS
For additional information on transporting chil- Before every drive, make sure that all occupants
dren safely, refer to page 35. wear their safety belts. Airbags complement the
safety belt as an additional safety device, but
Airbags they do not represent a substitute.
Always maintain an adequate distance Never allow more than one person to
between yourself and the airbags. Always wear a single safety belt. Never allow
grip the steering wheel on the rim, with your infants or small children to ride in a passenger's
hands in the 3 o'clock and 9 o'clock positions, to lap.
minimize the risk of injury to the hands or arms Make sure that the belt in the lap area sits low
DRIVING TIPS
in the event of the airbag being triggered off. across the hips and does not press against the
No one and nothing is to come between the air- abdomen. The safety belt must not rest against
bags and the seat occupant. the throat, run across sharp edges, pass over
Do not use the cover of the front airbag on the hard or fragile objects or be pinched. Fasten the
front passenger side as a storage area. Ensure safety belt so that it is pulled taut across the lap
that the front passenger is correctly seated, e.g. and shoulder, fitting the body snugly without
that no feet or legs are propped against the any twists. Otherwise the belt could slide over
dashboard. Otherwise, leg injury could result if the hips in the event of a frontal collision and
the front airbag suddenly deployed. injure the abdomen. Avoid wearing bulky cloth-
Make sure that passengers do not lean their ing and regularly pull the belt in the upper-body MOBILITY
heads against the side airbags, otherwise seri- area taut, otherwise its restraining effect could
ous injuries could result if the airbags suddenly be impaired.<
deployed.< Safety belts, refer to page 32.
Even if you follow all the instructions, injuries
resulting from contact with airbags cannot be
fully excluded, depending on the circumstances. Seats
The ignition and inflation noise may provoke a
mild hearing loss in extremely sensitive individ- Note before adjusting
uals. This effect is usually only temporary.
Never attempt to adjust your seat while
REFERENCE
For airbag locations and additional information the vehicle is moving. The seat could
on airbags, refer to page 64. respond with unexpected movement, and the
ensuing loss of vehicle control could lead to an
accident.
29
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
On the front passenger seat as well, do not Backrest
Adjustments
Seat adjustment
Pull the lever, arrow 1, and apply your weight to
Observe the instructions on page 29 to the backrest or lift it off, as necessary, arrows 2.
ensure the best possible personal protec-
tion.<
Lumbar support*
You can also adjust the contour of the backrest
to obtain additional support in the lumbar
region.
The upper hips and spinal column receive sup-
plementary support to help you maintain a
relaxed, upright sitting position.
Longitudinal adjustment
Pull the lever, arrow 1, and slide the seat to the
desired position, arrows 2.
After releasing the lever, move the seat gently
forward or back to make sure it engages prop-
erly.
Turn the wheel to increase or decrease the cur-
Height vature.
Convenient entry
The convenient entry feature includes a
mechanical memory function for the longitudi-
nal adjustment and backrest angle.
30
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Height adjustment
AT A GLANCE
1. Pull up the lever on the seat backrest,
arrow 1. To raise: pull up.
The backrest folds forward. To lower: press the button, arrow 1, and slide
2. Move the seat forward by pushing on the the head restraint down.
backrest, arrow 2.
CONTROLS
Removing
Previous position
1. Push the seat back into its previous position.
Do not fold the backrest up until the
seat is in its previous position. Other-
wise, the seat will engage in its current posi-
tion. In this case, adjust the longitudinal po-
sition manually, page 30.<
DRIVING TIPS
2. Fold the backrest back up to lock the seat.
When moving the seat backwards, ensure
that you do not cause personal injury or Front
property damage. 1. Pull up as far as it will go.
Before driving off, engage the front seats and
2. Fold the backrest forward slightly.
seat backrests. Otherwise there is a risk of acci-
dent due to unexpected movement.< 3. Press button 1 and pull the head restraint
out as far as it will go.
4. Additionally press button 2 and pull the
Head restraints head restraint out completely. MOBILITY
31
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Seat heating* Closing
Adjustments
Opening
1. Grasp the belt firmly.
2. Press the red button in the buckle.
3. Guide the belt into its reel.
Switching on
Press once for each temperature level. Seat belt reminder
Three LEDs indicate the highest temperature.
If you continue driving within the next 15 min- Front seats
utes, the seat heating is automatically activated The indicator lamps come on and an
at the previously set temperature. acoustic signal sounds. Check whether
The temperature is lowered or the heating is the safety belt has been fastened cor-
switched off entirely to save on battery power. rectly. The 'Fasten safety belts'
The LEDs stay lit. reminder is issued when the driver's safety belt
has not been fastened. The 'Fasten safety belts'
Switching off reminder is also activated at road speeds above
approx. 5 mph or 8 km/h if the front passenger's
Press button longer.
safety belt has not been fastened, if objects are
placed on the front passenger seat, or if driver or
front passenger unfasten their safety belts.
Safety belts
Observe the instructions on page 29 to Damage to safety belts
ensure the best possible personal protec- If the safety belts are damaged or stressed
tion.< in an accident: have the safety belt system
Before every drive, make sure that all occupants and its seat-belt tensioners replaced and the
wear their safety belts. Airbags complement the belt anchors checked. Have this work carried out
safety belt as an additional safety device, but only by a MINI Dealer or by a workshop that has
they do not represent a substitute. specially trained personnel working in accor-
dance with the specifications of the MINI manu-
facturer, otherwise correct operation of these
Front and rear seats
safety systems is not ensured.<
32
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Mirrors Interior rearview mirror
Exterior mirrors
The front passenger's mirror is more con-
AT A GLANCE
vex than the driver's mirror. The objects
seen in the mirror are closer than they appear.
Do not gauge your distance from traffic behind
you on the basis of what you see in the mirror;
otherwise there is an increased risk of an acci-
dent.<
To reduce glare from vehicles behind you when
you are driving at night:
Turn the knob.
CONTROLS
Interior mirror, automatic dimming*
DRIVING TIPS
Manual adjustment
The mirrors can also be adjusted manually: press
the edge of the glass. The automatic dimming feature of the interior
rearview mirror* is controlled by two photo cells
Folding mirrors in and out* in the mirror. One photo cell is in the mirror
frame, arrow; the other is on the back of the mir-
Turn the knob beyond the pressure point in
ror.
direction 2. The mirrors can be folded in at road
speeds up to approx. 20 mph/30 km/h. In order to ensure that the system functions cor-
rectly, keep the photo cells clean, do not cover
This can be beneficial in narrow streets, for
the area between the interior rearview mirror MOBILITY
example, or for moving mirrors that were folded
and windshield, and do not affix adhesive labels
in by hand back out into their correct positions.
or stickers of any kind to the windshield directly
in front of the mirror.
Automatic heating*
At outside temperatures below a certain limit,
both exterior mirrors are automatically heated
while the engine is running or the ignition
switched on.
REFERENCE
33
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Steering wheel
Adjustments
Adjustments
Do not adjust the steering wheel position
while the car is in motion, otherwise there
is a risk of accident due to an unexpected move-
ment.<
34
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Transporting children safely
AT A GLANCE
children installation
Do not leave children unattended in the Observe the child-restraint system manu-
vehicle, otherwise they could endanger facturer's instructions when selecting,
themselves and/or other persons by opening the installing and using child-restraint systems. Oth-
doors, for example.< erwise the protective effect may be dimin-
ished.<
Children should always sit in the rear
Accident research has shown that the safest On the front passenger seat
place for children is on the rear seat. After installing a child-restraint system on
CONTROLS
Only transport children under the age of the front passenger seat, make sure that
13 or smaller than 5 ft/150 cm in the rear the front and side airbags for the front passen-
in a child-restraint system suitable for their age, ger are deactivated, otherwise there is an
weight and size. Otherwise there is an increased increased risk of injury if the airbags deploy.<
risk of injury in the event of an accident.<
Child seat security
Children 13 years of age or older must be buck-
led in with a safety belt as soon as there no
longer is any child-restraint system that is
DRIVING TIPS
appropriate for their age, size and weight.
Only install child seats in the rear when the
rear seat backrest is folded all the way
back and engaged. Otherwise there will be an
increased risk of injury in the event of an acci-
dent.<
Exception for front passenger seat All rear safety belts and the safety belt for the front
passenger can be prevented from being pulled out
Front passenger airbags in order to secure child-restraint systems. MOBILITY
Should it be necessary to use a child-
restraint system on the front passenger To lock the safety belt
seat, the front and side airbags must be deacti- 1. Secure the child-restraint system with the belt.
vated. Otherwise, there is an increased risk of 2. Pull the belt strap all the way out.
injury to the child if the airbags deploy, even if
3. Allow the belt strap to retract and pull it taut
the child is seated in a child-restraint system.<
against the child-restraint system.
For more information on automatic deactivation
The safety belt is locked.
of the front passenger airbags, refer to page 65.
REFERENCE
35
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
LATCH child-restraint Placement of the tether strap
Transporting children safely
fixing system
LATCH: Lower Anchors and Tethers for CHildren.
To install and use the LATCH child-
restraint system, follow the operating and
safety instructions provided by the manufac-
turer of the system, otherwise the protective
function of the seat may be compromised.<
36
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Driving
AT A GLANCE
Inserting the key into the ignition lock
CONTROLS
Press the start/stop button to switch radio readi-
ness or the ignition on and off. Do not depress
Insert the key all the way into the ignition lock.
the brake or clutch while doing so.
Radio readiness
When you press the start/stop button and
Individual electrical consumers can operate.
depress the clutch if the car has manual
transmission or the brake if the car has auto-
Removing the key from the ignition lock matic transmission, the engine starts.<
Press in the key briefly. It is ejected slightly.
Radio readiness
DRIVING TIPS
At the same time:
> The ignition is switched off if it was on Individual electrical consumers can operate. The
beforehand. time and outside temperature are displayed in
the tachometer.
Automatic transmission Radio readiness is switched off automatically:
You cannot take out the key unless the selector > When the key is removed from the ignition
lever is in the P position: interlock. lock
> When using convenient access* by pushing
the button on the door handle or the
MOBILITY
button on the remote control, refer to Lock-
ing on page 26
Ignition on
Most indicator and warning lamps in indicator
area 1, page 13, light up for varying lengths of
time.
When the engine is off, switch off the igni-
tion and any unnecessary electrical con-
REFERENCE
37
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
The ignition automatically turns off* when the
Driving
Manual transmission
1. With the car at a standstill, press the start/
stop button.
2. Shift into first gear or reverse.
3. Forcefully apply the parking brake.
38
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Automatic transmission Manual transmission
1. With the car at a standstill, move the selector
lever to position P.
2. Press the start/stop button.
AT A GLANCE
3. Forcefully apply the parking brake.
Parking brake
The parking brake is primarily intended to pre-
vent the vehicle from rolling while parked; it
brakes the rear wheels. When shifting into 5th or 6th gear, press
the gearshift lever to the right. Otherwise
Applying the engine could be damaged if you inadvert-
CONTROLS
The lever locks in position automatically. ently shift into 3rd or 4th gear.<
Automatic transmission*
DRIVING TIPS
with Steptronic
In addition to the fully automatic mode, you can
shift gears manually using Steptronic, page 40.
Pull slightly upwards, press the button and lower
the lever.
Parking the vehicle
In exceptional cases, if the parking brake
To prevent the vehicle from rolling, always
has to be used to slow or stop the car, do
select position P and apply the parking
not pull the lever up too hard. In doing so, con-
brake before leaving the vehicle with the engine
tinuously press the button of the parking brake
running.< MOBILITY
lever.
Otherwise, excessive force could lead to over-
Removing the key
braking and loss of traction, i.e. fishtailing, at the
rear axle.< 1. Move the selector lever to position P.
2. Switch off the engine.
3. Remove the key.
39
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Displays in the tachometer R Reverse
Driving
N Neutral
Select this when you are in a car wash, for exam-
ple. The vehicle can roll.
40
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
To use the automatic mode again, move the 1. Unclip the sleeve of the selector lever.
selector lever to the right into position D. 2. Pull the sleeve up over the selector lever
Upshifts and downshifts are executed only when until the sleeve is inside out. Disconnect the
they will result in a plausible combination of cable connector if necessary.
engine and vehicle speed; thus, for example, a
AT A GLANCE
downshift that would cause the engine to over-
rev will not be executed by the system. The
selected gear is displayed briefly, followed by
the actual gear.
CONTROLS
matically switches to manual mode.
onboard tool kit and insert it in the loop on
If you do not shift gears with the shift paddles or
the front passenger side.
accelerate for a certain amount of time, the
transmission automatically returns to D, auto- 4. Pull the loop up.
matic drive. 5. Move the selector lever into the desired
position by pressing the button on the front
of the selector lever.
DRIVING TIPS
Turn signals/
headlamp flasher
tance point.
Unusually rapid flashing of the indicator
lamp indicates that an indicator bulb has
failed.<
41
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Indicating a turn briefly 7. Press and hold the button until the display
Driving
Switching on wipers
Press the lever upward, arrow 1.
The lever automatically returns to its initial posi-
tion when released.
42
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Intermittent wipe or rain sensor* 4. Briefly press the button repeatedly until the
If the car is not equipped with a rain sensor, the symbol and "SET" are displayed.
intermittent-wipe time is preset.
If the car is equipped with a rain sensor, the time
between wipes is controlled automatically and
AT A GLANCE
depends on the intensity of the rainfall. The rain
sensor is mounted on the windshield, directly in
front of the interior rearview mirror.
CONTROLS
could result in damage caused by undesired
wiper activation.<
DRIVING TIPS
6. Press the button to select the desired sensi-
tivity.
7. Wait, or press and hold the button until the
display changes.
The settings are stored.
Brief wipe
Press the lever downward once, arrow 2.
43
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Do not use the washers when the washer Washer fluid
Driving
44
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Cruise control* Cruise control is not deactivated by depressing
the accelerator pedal. Once the accelerator
pedal is released, the stored speed is achieved
The concept
again and maintained.
Cruise control is available at vehicle speeds of at
The stored speed is cleared when the ignition is
AT A GLANCE
least approx. 20 mph or 30 km/h. The car then
switched off.
stores and maintains the speed that you specify
using the button on the steering wheel.
Maintaining current speed
Do not use cruise control when driving at
Press button 3.
constant speed is prevented by adverse
conditions, e.g. winding roads, dense traffic or The system maintains and stores the current
poor road conditions due to, e.g., snow, rain, ice vehicle speed.
or loose surfaces. Otherwise you could lose con- If, on a downhill grade, the engine braking effect
trol of the vehicle and cause an accident as a is not sufficient, the controlled speed may be
result.< exceeded. On uphill grades vehicle speed may
CONTROLS
drop if the engine output is insufficient.
Activating
Increasing speed
Press button 3 repeatedly until the desired
speed is reached. Every time you press the but-
ton, the speed increases by approx. 1 mph or
2 km/h.
DRIVING TIPS
Press and hold button 3.
The vehicle accelerates without pressure on the
1 Resuming cruise control accelerator pedal. After the button is released,
2 Activating/deactivating cruise control the driving speed is maintained and stored.
3 Maintaining, storing and increasing speed
Decreasing speed
4 Maintaining, storing and decreasing speed
Press button 4 repeatedly until the desired
Indicator lamp in the speedometer lights up. The speed is reached.
cruise control system is ready and can be acti-
The functions here are the same as for increas- MOBILITY
vated.
ing the speed or accelerating, except that the
speed will be decreased.
Activating/deactivating cruise control
Press button 2. Resuming a speed stored beforehand
In addition, the system is automatically deacti- Press button 1.
vated:
The last speed stored is achieved again and
> When the brakes are applied maintained.
> When the clutch is depressed The stored speed is cleared when the ignition is
REFERENCE
45
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Display in tachometer*
Driving
Malfunction
The warning lamp in the tachometer
lights up if the system fails.
46
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Everything under control
Odometer, outside tem- 1. Press the button in the turn indicator lever
AT A GLANCE
repeatedly until the current speed appears
perature display, clock in the lower display.
2. Wait for the speed display to automatically
move to the upper display.
The outside temperature then appears in the
lower display.
CONTROLS
With the ignition switched on, press knob 3 in
1 Outside temperature display and clock or the tachometer.
current speed
When the vehicle is parked
2 Odometer and trip odometer
To display the time, outside temperature and
3 Resetting the trip odometer
odometer briefly after the key is removed from
the ignition lock:
Units of measure Press knob 3 in the tachometer.
Select the respective units of measure, miles or
DRIVING TIPS
km for the odometer as well as 7 or 6 for the
outside temperature, page 50. Tachometer
Outside temperature display, time
Setting the time, refer to page 53.
47
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Fuel gauge Computer*
Everything under control
Displays in tachometer
48
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Current fuel consumption 1. Press the button in the turn indicator lever
Displays the current fuel consumption to allow repeatedly until the current speed appears
you to see whether your current driving style is in the lower display.
conducive to fuel economy with minimum 2. Wait for the speed display to automatically
exhaust emissions. move to the upper display.
AT A GLANCE
The outside temperature then appears in the
Average speed lower display of the computer.
Periods with the vehicle parked and the engine
switched off are not included in the calculations
of average speed.
To reset average speed: press the button in the
turn indicator lever for approx. 2 seconds.
CONTROLS
To have the current speed shown in the upper
display otherwise serving for the outside tem-
perature display and clock.
DRIVING TIPS
MOBILITY
REFERENCE
49
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
1 Button for: 6 Adjusting settings
Everything under control
> Confirming selected display or set values > Response during unlocking
procedure 19
> Calling up computer information 48
> Automatic locking 23
2 Calling up Check Control 54
> Pathway lighting 67
3 Displaying vehicle check 55
> Daytime running lamps 68
4 Initializing the Flat Tire Monitor 59
Resetting the Tire Pressure Monitor 61 > Triple turn signal activation 42
1. Briefly press the button in the turn indicator 1. Within a setting or item of information,
lever repeatedly until "HOME" is displayed. briefly press the button in the turn indicator
2. Press the button for a longer period. lever repeatedly until "NEXT" is displayed.
The display again shows the outside tempera- 2. Press the button for a longer period.
ture and the time. The display changes directly to the next setting
Displays are also exited if no entries are made or item of information.
for approx. 8 seconds.
50
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
1. Switch on the ignition, refer to page 37. 7. Press and hold the button until the display
2. Briefly press the button in the turn indicator changes.
lever repeatedly until "SET/INFO" is displayed. 8. Press the button briefly to change the for-
mat or unit of measure.
9. Press and hold the button until the display
AT A GLANCE
changes.
The settings are stored.
CONTROLS
lever repeatedly until "SET/INFO" is dis-
4. Briefly press the button repeatedly until the
played.
symbol and "SET" are displayed.
DRIVING TIPS
5. Press and hold the button until the display
2. Press and hold the button until the display
changes.
changes.
6. Briefly press the button repeatedly until the
3. Briefly press the button repeatedly until the
display shows the illustrated symbol, arrow.
symbol and "SET" are displayed.
MOBILITY
51
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
5. Briefly press the button repeatedly until 1. Switch on the ignition, refer to page 37.
Everything under control
52
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Possible displays
AT A GLANCE
CONTROLS
1 Button for selecting information 6 Roadworthiness test
2 Engine oil 7 Brake fluid
3 Front brakes 8 Exit display 50
DRIVING TIPS
4 Rear brakes 9 Next setting or item of information 50
5 Vehicle check More information on the MINI Maintenance Sys-
tem can be found on page 107.
53
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
7. Press the button to set the minutes. Check Control
Everything under control
54
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Other Check Control messages are automatically 3. Press the button repeatedly until the display
hidden after approx. 20 seconds, but remain shows the corresponding symbol and
stored. "CHECK INFO".
AT A GLANCE
This symbol indicates that Check Control 4. Hold the button down.
messages have been stored. Check Control mes- "CHECK OK" appears if there are no Check
CONTROLS
sages can be viewed whenever it is convenient. Control messages.
If a Check Control message has been stored,
Viewing stored Check Control messages the corresponding message is displayed.
Stored Check Control messages can only be dis- 5. Briefly press the button to check for other
played if the driver's door is closed. messages.
1. Briefly press the button in the turn indicator
lever repeatedly until "SET/INFO" is dis-
played.
DRIVING TIPS
2. Press and hold the button until the display
MOBILITY
changes.
REFERENCE
55
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Technology for driving comfort
Technology for driving comfort and safety
and safety
56
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Antilock Brake System ABS DSC also encompasses the following functions:
ABS prevents locking of the wheels during brak- > Antilock Brake System ABS
ing. Safe steering response is maintained even > Electronic brake-force distribution EBV
during full braking. Active safety is thus
> Brake Assist
increased.
AT A GLANCE
> Cornering Brake Control CBC
Braking safely, refer to page 85.
> Hill Start Assist
Among others, ABS includes the following func-
tions:
Deactivating DSC
> Cornering Brake Control CBC
> Electronic brake-force distribution EBV
> Brake Assist
CONTROLS
Driving stability and steering characteristics are
further enhanced while braking in turns or dur-
ing a lane change.
Electronic brake-force distribution EBV Press the button repeatedly until the DSC indica-
The system controls the brake pressure in the tor lamps come on. DSC is deactivated. Stabiliz-
rear wheels to ensure stable braking behavior. ing and propulsion promoting actions are no
longer executed.
Brake Assist When driving with snow chains or to 'rock free'
DRIVING TIPS
Rapidly depressing the brake causes this system in snow, it can be helpful to switch off DSC for a
to automatically develop maximum braking brief period.
force. Thus, the system helps keep braking dis- To increase vehicle stability, activate DSC again
tance to a minimum. At the same time, all the as soon as possible.
benefits provided by ABS are exploited.
Do not reduce the pressure on the brake for the Activating DSC
duration of the full braking application. Press the button again: the DSC indicator lamps
go out.
Dynamic Stability Control DSC
MOBILITY
DSC prevents the driving wheels from losing For better control
traction when you pull away from rest or accel- If the indicator lamp flashes:
erate. The system also recognizes unstable driv- The DSC controls the driving and
ing conditions, for example if the rear of the car breaking forces.
is about to swerve or if momentum is acting at
If the indicator lamps are on:
an angle past the front wheels. In these cases,
DSC is deactivated.
DSC helps the vehicle maintain a safe course
within physical limits by reducing engine output
and through braking actions at the individual
wheels.
REFERENCE
57
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Dynamic Traction Control DTC* Deactivating both DTC and DSC
Technology for driving comfort and safety
Activating DSC
Press the button again: the indicator lamps go
out.
If the indicator lamp flashes: 2. Release the brake and immediately drive
DTC controls the driving and breaking off.
forces. Hill Start Assist holds the car in place for approx.
If the indicator lamps are on: 2 seconds after the brake is released.
DTC is activated. Depending on the load and gradient, the
vehicle can roll backward slightly during
this period. After you release the brake, immedi-
ately start driving since the hill start assist only
Deactivating DTC holds the vehicle for about 2 seconds, and it will
start to roll backwards.<
Press the button again: the DSC indicator lamps
go out.
58
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Sport button* Each time you correct the pressure in a
tire, or change a wheel or tire, the system
Pressing the button causes your MINI to respond must be reinitialized.<
even more sportily.
> Engine responds more spontaneously to System limitations
AT A GLANCE
movements of the accelerator. The Flat Tire Monitor is unable to warn the driver
> Steering response is more direct. of sudden, severe tire damage caused by exter-
nal factors, nor can it identify the gradual loss of
With automatic transmission:
pressure that will inevitably occur in all four tires
> More rapid gear shifting in Sport program. over a lengthy period of time.
In the following situations, the system could be
Activating the system
delayed or malfunction:
> System has not been initialized
> Driving on snowy or slippery road surface
CONTROLS
> Performance-oriented style of driving: slip in
the drive wheels, high lateral acceleration
> Snow chains are attached
When the vehicle is driven with a space-saver
spare tire*, page 120, the Flat Tire Monitor can-
not function.
Press the SPORT button.
The LED lights up. Initializing the system
DRIVING TIPS
SPORT is briefly displayed in the tachometer. The initialization is completed during driv-
ing, which can be interrupted at any time.
Deactivating the system When driving resumes, the initialization is con-
> Press the SPORT button again. tinued automatically.
Do not initialize the system if you are driving
> Switch off the engine.
with snow chains or a space-saver spare tire*.<
1. Start the engine, but do not start driving.
Flat Tire Monitor FTM* 2. Briefly press the button in the turn indicator
lever repeatedly until "SET/INFO" is dis-
MOBILITY
played.
The concept
The Flat Tire Monitor detects pressure loss in a
tire by comparing the rotating speeds of the
individual tires while moving.
If a tire loses pressure, its rolling circumference
changes, and this in turn alters the speed of
rotation. This change is detected and is reported
as a flat tire.
REFERENCE
Functional requirement
In order to assure the reliable reporting of a flat 3. Press and hold the button until the display
tire, the system must be initialized for the cor- changes.
rect tire inflation pressure.
59
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
4. Briefly press the button repeatedly until the Do not continue driving if the vehicle is
Technology for driving comfort and safety
corresponding symbol and "RESET" are dis- not equipped with Run-Flat Tires,
played. page 101, otherwise a serious accident
could result.<
2. At the next opportunity, check the air pres-
sure in all four tires.
If all four tires are inflated to the cor-
rect pressures, the Flat Tire Monitor
might not have been initialized. The system
must then be initialized.<
3. In the event of complete tire pressure loss,
0 psi/0 kPa, you can estimate the possible
5. Press and hold the button until the display distance for continued driving on the basis
changes. of the following guidelines:
6. Start driving. > With a light load:
Initialization is completed while the car is on 1 to 2 persons without luggage:
the move, without any feedback. approx. 155 miles/250 km
> With a medium load:
Indication of a flat tire 2 persons, cargo bay full, or 4 persons
The warning lamps come on in yellow without luggage:
and red. An acoustic signal also sounds. approx. 90 miles/150 km
There is a flat tire or substantial loss of > With a full load:
tire pressure. 4 persons, load compartment full:
1. Reduce speed and stop the vehicle with cau- approx. 30 miles/50 km
tion. Avoid sudden braking and steering Drive cautiously and do not exceed a
maneuvers. speed of 50 mph or 80 km/h, otherwise an
2. Check whether your vehicle is equipped accident may occur. In the event of pressure
with normal tires or Run-Flat Tires. loss, vehicle handling changes. This includes
reduced tracking stability in braking, extended
The symbol identifying Run-Flat Tires
braking distance and altered natural steering
is a circle with the letters RSC on the
characteristics. If unusual vibration or loud
sidewall, refer to Run-Flat Tires, page 101.<
noises occur during the journey, this may be an
indication that the damaged tire has finally
Normal tires failed. Reduce the vehicle speed and stop as
1. Determine which tire is damaged. soon as possible. Otherwise, sections of the tire
If this cannot be determined, contact may come loose and cause accidents. Do not
your MINI Dealer.< continue driving and contact your MINI
2. Repair the flat tire, refer to page 117, or Dealer.<
change the damaged tire, refer to page 119.
Malfunction
Run-Flat Tires* The warning lamps light up in yellow.
1. Cautiously reduce speed to below 50 mph There is a malfunction in the Flat Tire
or 80 km/h. Avoid sudden braking and Monitor or the system has failed. Have
steering maneuvers. Do not exceed a speed the system checked as soon as possible.
of 50 mph or 80 km/h.
60
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Tire Pressure Monitor 2. Briefly press the button in the turn indicator
lever repeatedly until "SET/INFO" is dis-
TPM* played.
The concept
AT A GLANCE
TPM checks the inflation pressures of the four
mounted tires. The system notifies you if there is
a significant loss of pressure in one or more tires.
Functional requirement
In order to assure the reliable reporting of a flat
tire, the system must be reset while all tire infla-
tion pressures are correct.
3. Press and hold the button until the display
Always use wheels with TPM electronics. Other-
changes.
CONTROLS
wise, the system may malfunction.
4. Repeatedly press the button briefly until the
Each time a tire inflation pressure has
symbol for Tire Pressure Monitor and
been corrected or a wheel or tire has been
"ACTIVE" are displayed.
changed, reset the system.<
The Tire Pressure Monitor can be reset using
"RESET".
System limitations
TPM cannot warn you in advance of sud-
den severe tire damage caused by outside
influences.<
DRIVING TIPS
The system does not work correctly if it has not
been reset; for example, a flat tire may be indi-
cated even though the tire inflation pressures
are correct.
The system is inactive and cannot indicate a flat
tire if a wheel without TPM electronics, such as a
compact spare wheel*, has been mounted, or if 5. Press and hold the button until "RESETTING"
TPM is temporarily malfunctioning due to other appears.
systems or devices using the same radio fre-
MOBILITY
quency.
61
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
6. Start driving. distance for continued driving on the basis
Technology for driving comfort and safety
After driving a few minutes, the set inflation of the following guidelines:
pressures in the tires are accepted as the tar- > With a light load:
get values to be monitored. The system 1 to 2 persons without luggage:
reset is completed during your drive, and approx. 155 miles/250 km
can be interrupted at any time. When driving
> With a medium load:
resumes, the reset is continued automati-
2 persons, cargo bay full, or 4 persons
cally. The indicator lamp goes out after the
without luggage:
system reset is completed.
approx. 90 miles/150 km
Message for low tire inflation pressure > With a full load:
4 persons, load compartment full:
The warning lamps come on in yellow
approx. 30 miles/50 km
and red. An acoustic signal also sounds.
There is a flat tire or substantial loss of Drive cautiously and do not exceed a
tire pressure. speed of 50 mph/80 km/h, otherwise an
accident may occur. In the event of pressure
1. Reduce speed and stop the vehicle with cau-
loss, vehicle handling changes. This includes
tion. Avoid sudden braking and steering
reduced tracking stability in braking, extended
maneuvers.
braking distance and altered natural steering
2. Check whether your vehicle is equipped characteristics. If unusual vibration or loud
with normal tires or Run-Flat Tires. noises occur during the journey, this may be an
The symbol identifying Run-Flat Tires indication that the damaged tire has finally
is a circle with the letters RSC on the failed. Reduce the vehicle speed and stop as
sidewall, refer to the Owner's Manual for Ve- soon as possible. Otherwise, sections of the
hicle.< tire may come loose and cause accidents. Do
not continue driving and contact your MINI
Normal tires Dealer.<
1. Determine which tire is damaged.
Malfunction
If this cannot be determined, contact
your MINI Dealer.< The small warning lamp flashes in yel-
low and then lights up continuously; the
2. Repair the flat tire or change the damaged
larger warning lamp comes on in yel-
tire, refer to page 119.
low.
On the onboard monitor, the tires are shown in
Run-Flat Tires* gray and a message appears. No punctures can
1. Cautiously reduce speed to below 50 mph/ be detected.
80 km/h. Avoid sudden braking and steering
This type of message is shown in the following
maneuvers. Do not exceed a speed of
situations:
50 mph/80 km/h.
> If there is a malfunction
Do not continue driving if the vehicle is
Have the system checked.
not equipped with Run-Flat Tires, oth-
erwise a serious accident could result.< > If a wheel without TPM electronics has been
mounted
2. In the event of complete tire pressure loss,
0 psi/0 kPa, you can estimate the possible > If TPM is temporarily malfunctioning due to
other systems or devices using the same
radio frequency.
62
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Message for unsuccessful system reset The TPMS malfunction indicator is combined
Both warning lamps come on in yellow. with the low tire pressure telltale. When the sys-
The system is not reset after a tire has tem detects a malfunction, the telltale will flash
been changed, for example. for approximately one minute and then remain
continuously lit. This sequence will continue
Check the tire inflation pressure and
AT A GLANCE
upon subsequent vehicle startups as long as the
reset the system, refer to the Owner's Manual
malfunction exists. When the malfunction indi-
for Vehicle.
cator is illuminated, the system may not be able
to detect or signal low tire pressure as intended.
Declaration according to NHTSA/ TPMS malfunctions may occur for a variety of
FMVSS 138 Tire Pressure Monitoring reasons, including the installation of replace-
Systems ment or alternate tires or wheels on the vehicle
Each tire, including the spare, should be that prevent the TPMS from functioning prop-
checked monthly when cold and inflated to the erly. Always check the TPMS malfunction telltale
inflation pressure recommended by the vehicle after replacing one or more tires or wheels on
CONTROLS
manufacturer on the vehicle placard or tire infla- your vehicle to ensure that the replacement or
tion pressure label. If your vehicle has tires of a alternate tires and wheels allow the TPMS to
different size than the size indicated on the vehi- continue to function properly.
cle placard or tire inflation pressure label, you
should determine the proper tire inflation pres-
sure for those tires. As an added safety feature,
your vehicle has been equipped with a tire pres-
sure monitoring system TPMS that illuminates a
low tire pressure telltale when one or more of
DRIVING TIPS
your tires are significantly under-inflated.
Accordingly, when the low tire pressure telltale
illuminates, you should stop and check your tires
as soon as possible, and inflate them to the
proper pressure. Driving on a significantly
under-inflated tire causes the tire to overheat
and can lead to tire failure. Underinflation also
reduces fuel efficiency and tire tread life, and
may affect the vehicle's handling and stopping
ability. Please note that the TPMS is not a substi-
MOBILITY
tute for proper tire maintenance, and it is the
driver's responsibility to maintain correct tire
pressure, even if underinflation has not reached
the level at which the TPMS low tire pressure tell-
tale illuminates.
REFERENCE
63
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Airbags
Technology for driving comfort and safety
Protective action
Observe the instructions on page 29 to instrument panel, seats and roof posts, as well as
ensure the best possible personal protec- the sides of the roof lining. Do not attempt to
tion.< remove or dismantle the steering wheel.
The front airbags help protect the driver and Do not touch the individual components imme-
front passenger by responding to frontal diately after the system has been triggered,
impacts in which safety belts alone cannot pro- because there is a danger of burns.
vide adequate restraint. When needed, the head In the event of malfunctions, deactivation, or
and side airbags help provide protection in the triggering of the airbag restraint system, have
event of side impact. The relevant side airbag the testing, repair, removal, and disposal of air-
supports the side upper body area. The head air bag generators executed only by a MINI Dealer
bag supports the head. or a workshop that works according to repair
procedures of the manufacturer of your MINI
The airbags are designed to not be triggered in
with correspondingly trained personnel and has
every type of collision, e.g. not in minor acci-
the required explosives licenses. Otherwise,
dents, certain rollover situations or rear impacts.
unprofessional attempts to service the system
Do not apply adhesive materials to the could lead to failure in an emergency or undes-
cover panels of the airbags, cover them or ired airbag activation, either of which could
modify them in any other way. result in personal injury.<
Keep the dashboard and window on the passen-
Warning notices and information about the air-
ger side free from obstruction, i.e. do not cover it
bags can also be found on the sun visors.
with adhesive film or coverings, and do not affix
any holders such as for a navigation device or a
mobile phone.
Do not attach seat covers, cushions or other
objects not specifically approved for seats with
integral side airbags to the front seats. Do not
hang items of clothing such as coats or jackets
over the backrests. Do not attempt to remove
the airbag retention system from the vehicle. Do
not modify the individual components of the
system or its wiring in any way. This includes the
upholstered covers on the steering wheel,
64
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Automatic deactivation of the front Status of front passenger airbags
passenger airbags
An analysis of the impression in the front pas-
senger seat cushion determines whether and
how the seat is occupied. The front and side air-
AT A GLANCE
bags for the front passenger are activated or
deactivated by the system accordingly.
The indicator lamp above the interior rear-
view mirror shows the current status of
the front passenger airbags, deactivated or acti-
vated, refer to Status of front passenger airbags The indicator lamp for the front passenger air-
below.< bags shows the functional status of the front
Before transporting a child on the front passenger's front and side airbags in accordance
passenger seat, read the safety precau- with whether and how the front passenger seat
CONTROLS
tions and handling instructions under Transport- is occupied. The indicator lamp shows whether
ing children safely, page 35. the front passenger airbags are activated or
The front and side airbags can also be deacti- deactivated.
vated by adolescents and adults sitting in certain > The indicator lamp comes on as intended
positions; the indicator lamp for the front pas- when a child in a specially designated child-
senger airbags comes on. In such cases, the pas- restraint system is detected on the seat.
senger should change his or her sitting position The front and side airbags for the front pas-
so that the front passenger airbags are activated senger are not activated.
and the indicator lamp goes out. If the desired
Most child seats are detected by the
DRIVING TIPS
airbag status cannot be achieved by changing
system. This particularly applies to
the sitting position, transport the relevant pas-
child seats that were required by the NHTSA
senger on a rear seat. Do not attach covers,
at the time of manufacture of the vehicle.
cushions, ball mats or other items to the front
After installing a child's seat, check that the
passenger seat unless they are specifically rec-
indicator lamp for the front passenger air-
ommended by the manufacturer of your MINI.
bags comes on. It indicates that the child's
Do not place any items under the seat which
seat has been detected and that the front
could press against the seat from below. Other-
passenger airbags are deactivated.<
wise a correct analysis of the seat cushion is not
ensured.< > The indicator lamp does not come on as long
as a person of sufficient size and in a correct
MOBILITY
65
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Operational readiness of airbag system
Technology for driving comfort and safety
66
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Lamps
AT A GLANCE
When the switch is in position 3, the low beams
are switched on and off automatically depend-
ing on ambient light conditions, e.g. in a tunnel,
in twilight, or if there is precipitation.
The headlamps may also come on when the sun
is sitting low on a blue sky.
When driving into tunnels with bright overhead
lights, there may be a delay before the head-
lamps come on.
CONTROLS
The low beams remain switched on indepen-
0 Lamps off and daytime running lamps dent of the ambient lighting conditions when
1 Parking lamps and daytime running lamps you switch on the fog lamps*.
2 Low-beam headlamps and welcome lamps If the daytime running lamps are activated,
3 Automatic headlamp control*, daytime run- page 68, the low beams are always switched on
ning lamps and welcome lamps with the light switch in position 3 and the igni-
tion on. The exterior lamps are automatically
When you open the driver's door with the igni-
switched off after the vehicle is parked.
tion switched off, the exterior lighting is auto-
matically switched off if the light switch is in The automatic headlamp control cannot
DRIVING TIPS
position 0, 2 or 3. serve as a substitute for your personal
judgment in determining when the lamps
Switch on the parking lamps if necessary, switch
should be switched on in response to ambient
position 1.
lighting conditions. For example, the system
cannot detect fog or hazy weather. To avoid
Parking lamps
safety risks, you should respond to these kinds
Turn the light switch to position 1. of low-visibility situations by switching the head-
The front, rear and side vehicle lighting is lamps on manually.<
switched on.
Activation of lights on one side of the vehicle for Welcome lamps MOBILITY
parking, page 69. If you leave the light switch in the low beam or
The parking lamps will discharge the bat- automatic headlamp control position when you
tery. Therefore, do not leave them on for switch off the ignition, the parking lamps and
unduly long periods of time, otherwise the bat- interior lamps come on for a certain time as soon
tery might not have enough power to start the as the vehicle is unlocked.
engine.<
Pathway lighting
Low beams If you activate the headlamp flasher after park-
Turn the light switch to position 2. ing the car, with the lights switched off, the low
REFERENCE
The low beams come on when the ignition is on. beams come on and remain on for a certain
time.
The setting is stored for the remote control in
use, refer to Personal Profile, page 18.
67
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Setting the duration or deactivating the 8. Briefly press the button to select:
Lamps
function >
1. Switch on the ignition, refer to page 37. The function is deactivated.
2. Briefly press the button in the turn indicator > ...
lever repeatedly until "SET/INFO" is dis- Select the corresponding duration, e.g.
played. 40 seconds.
9. Press the button for a longer period.
The setting is stored.
Activating/deactivating daytime
running lamps
The setting is stored for the remote control in
use, refer to Personal Profile, page 18.
1. Switch on the ignition, refer to page 37.
2. Briefly press the button in the turn indicator
lever repeatedly until "SET/INFO" is dis-
played.
5. Press and hold the button until the display
changes.
6. Briefly press the button repeatedly until the
display shows the illustrated symbol.
68
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
4. Briefly press the button repeatedly until the High beams/roadside
symbol and "SET" are displayed.
parking lamps
AT A GLANCE
5. Press and hold the button until the display
1 Turn signal indicators/roadside parking
changes.
lamps*
6. Briefly press the button repeatedly until the
CONTROLS
2 Switching on high beams
display shows the illustrated symbol, arrow.
3 Switching off high beams/headlamp flasher
Switching on
DRIVING TIPS
After parking the vehicle, press the lever up or
down, arrow 1.
7. Press and hold the button until the display
The roadside parking lamps drain the bat-
changes.
tery. Therefore, do not leave them on for
8. Briefly press the button to select: unduly long periods of time, otherwise the bat-
> tery might not have enough power to start the
Daytime running lamps activated. engine.<
>
Daytime running lamps deactivated. Switching off MOBILITY
9. Press the button for a longer period. Press the lever up or down to the pressure point.
The setting is stored.
REFERENCE
69
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Fog lamps* Increasing brightness
Lamps
Reducing brightness
Press the button briefly.
The brightness decreases every time the button
is pressed briefly.
Interior lamps
1 Fog lamps*
2 Rear fog lamp* The interior lamps, the footwell lamps* and the
cargo bay lamp are controlled automatically.
Press the respective switch to turn the lamps on/off.
To avoid draining the battery, all lamps
inside the car are switched off about
Fog lamps*
8 minutes after the ignition is switched off, refer
The parking lamps or low beams must be
to Start/stop button on page 37.<
switched on for the fog lamps to operate. The
green indicator lamp comes on when the fog
Switching interior lamps on/off manually
lamps are switched on.
Depending on your vehicle's equipment, the fog
lamps are switched off when you activate the
headlamp flasher or switch on the high beams.
If the automatic headlamp control is acti-
vated, the low beams will come on auto-
matically when you switch on the fog lamps.<
70
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Ambient lighting*
AT A GLANCE
The color of the ambient lighting can be
changed.
> Press the switch forward.
The color changes in stages, ultimately to
CONTROLS
orange.
> Press the switch toward the rear.
The color changes in stages, ultimately to
blue.
Intermediate settings and colors are possible.
DRIVING TIPS
MOBILITY
REFERENCE
71
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Climate
Climate
Equipment versions
Depending on your vehicle's equipment, your
MINI contains an air conditioner or an automatic
climate control*.
1 Air conditioner
2 Automatic climate control*
Air vents
3 Airflow directed toward the windshield and
side windows
4 Air to the upper body area
5 Air to the footwell
72
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Air conditioner
AT A GLANCE
1 Air flow rate 5 Rear window defroster
2 Cooling function 6 Air distribution
3 Recirculated-air mode 7 Windshield heating
CONTROLS
4 Temperature
DRIVING TIPS
If condensation starts to form on the
Switching the system on/off inside window surfaces, switch off the
Turn the air flow rate rotary switch to 0. Blower recirculated-air mode and, if necessary, switch
and air conditioner are completely switched off on the cooling function or increase the air flow
and the air supply is cut off. rate.<
Set any desired air flow rate to switch on the air To prevent the air quality inside the vehi-
conditioner. cle from deteriorating during extended
use of the recirculated-air mode, fresh air is
Cooling function added briefly at regular intervals.<
MOBILITY
When the cooling function is on,
Temperature
the air is cooled, dried, then
reheated according to the temper- Turn upward, red, to increase the temper-
ature setting. The recirculated-air mode may be ature.
switched on automatically. This function is only Turn downward, blue, to decrease the
available while the engine is running. temperature.
73
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Air distribution Defrosting windows and removing
Climate
Microfilter
The microfilter captures dust and pollen. The
microfilter is changed by your MINI Dealer dur-
ing routine maintenance work.
Comfortable interior climate Most settings are stored for the remote control
AUTO program 2 offers the ideal air distribution currently in use, refer also to Personal Profile set-
and air flow rate for almost all conditions, refer tings on page 18.
to AUTO program below. All you need to do is
select an interior temperature which is comfort-
able for you.
The following sections inform you in detail about
how to adjust the settings.
74
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Air flow rate, manual Recirculated-air mode: the supply of out-
Press the button to reduce air flow. Press side air is permanently shut off. The sys-
the + button to increase it. tem then recirculates the air currently
within the vehicle.
You can reactivate the automatic mode
for the air flow rate with the AUTO button. If condensation starts to form on the
AT A GLANCE
inside window surfaces, press the AUTO
The air flow rate is lowered or switched off
button or switch off the recirculated-air mode
entirely to save on battery power. The display
and, if necessary, increase the air flow rate.
remains the same.
The recirculated-air mode should not be used
over an extended period of time, otherwise the
Switching the system on/off air quality inside the car will deteriorate contin-
Reduce the air flow by pressing the button uously.<
repeatedly until the system is switched off. All
indicators go out. Maximum cooling
Press the AUTO button to switch the automatic
CONTROLS
At outside temperatures above
climate control back on. 32 7/0 6 and when the engine is
running, you obtain a maximum
AUTO program cooling effect as soon as possible.
The AUTO program adjusts the air The automatic climate control goes into recircu-
distribution to the windshield and lated-air mode at the lowest temperature. Air
side windows, towards the upper body area and flows at maximum rate from the vents for the
into the footwell for you. The air flow rate and upper body area. You should therefore open
your temperature specifications will be adapted them for maximum cooling.
to outside influences in accordance with sea-
DRIVING TIPS
sonal changes, e.g. sunlight. Air distribution, manual
The cooling function is automatically switched The flow of air is directed to the
on along with the AUTO program. windows, to the upper body area or
to the footwell as selected.
Automatic recirculated-air control AUC/ You can switch the automatic air
Recirculated-air mode distribution back on by pressing the AUTO but-
Switch on the desired operating ton.
mode by pressing the button
repeatedly. Temperature MOBILITY
75
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Rear window defroster Microfilter/activated-charcoal filter
Climate
The defroster is switched off auto- The microfilter captures dust and pollen. The
matically after a certain time. activated-charcoal filter provides additional pro-
Depending on your vehicle's equip- tection by filtering gaseous pollutants from the
ment, the upper wires serve as an outside air. Your MINI Dealer replaces this com-
antenna and are not part of the rear window bined filter as a standard part of your scheduled
defroster. maintenance.
You can call up further information in the service
Defrosting windows and removing requirements display, page 52.
condensation
Quickly removes ice and condensa-
tion from the windshield and front Ventilation
side windows.
For this purpose, also switch on the
cooling function.
The windshield heating* is switched on auto-
matically.
Windshield heating*
The windshield heating is switched
off automatically after a certain
time.
1 Knob for continuous opening and closing
2 Jet for direction of air flow
76
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Practical interior accessories
AT A GLANCE
HomeLink is a registered trademark of Johnson
mote control* Controls, Inc.
CONTROLS
held transmitters.
The signal of an original hand-held transmitter
can be programmed on one of the three mem-
ory buttons 1. The system in question can then
1 Memory buttons
be operated by means of the programmed
memory button 1. The LED 2 flashes to confirm 2 LED
transmission of the signal.
If you decide to sell your vehicle one day, in the
Fixed-code hand-held transmitters
interest of your own security, remember to clear 1. Switch on the ignition, page 37.
DRIVING TIPS
the stored programs before the vehicle leaves 2. When starting operation for the first time:
your possession, page 78. press both outer memory buttons 1 for
To prevent possible damage or injury, approx. 20 seconds until the LED 2 flashes
before programming or using the inte- rapidly. All stored programs are cleared.
grated universal remote control, always inspect 3. Hold the original hand-held transmitter at a
the immediate area to make certain that no distance of approx. 2 to 12 in/5 to 30 cm
people, animals or objects are within the pivot- from the memory buttons 1.
ing or travel range of the device being operated. The required distance between the
Comply also with the safety instructions supplied hand-held transmitter and the mem-
with the original hand-held transmitter.< ory buttons 1 depends on the system of the
MOBILITY
For additional information, please contact your does not flash rapidly after approx. 15 sec-
MINI Dealer or call: 1-800-355-3515. onds, alter the distance.
You can also obtain information on the Internet 5. To program other original hand-held trans-
at: mitters, repeat steps 3 and 4.
www.MINI.com or
77
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
The corresponding memory button 1 is now The corresponding memory button 1 is now
Practical interior accessories
programmed with the signal of the original programmed with the signal of the original
hand-held transmitter. hand-held transmitter.
You can operate the system with the engine
running or with the ignition switched on. Clearing stored programs
If the system fails to function even after Press both outer memory buttons 1 for approx.
repeated programming, check whether 20 seconds until the LED 2 flashes: All stored
the original hand-held transmitter uses an alter- programs are cleared.
nating-code system. To do so, either read the It is not possible to clear individual programs.
instructions for the original hand-held transmit-
ter or hold down the programmed memory Reassigning individual programs
button 1 of the integrated universal remote con- 1. Hold the original hand-held transmitter at a
trol. If the LED 2 on the integrated universal distance of approx. 2 to 12 in/5 to 30 cm
remote control flashes rapidly and then remains from the memory buttons 1.
lit for about two seconds, the original hand-held
The required distance between the
transmitter uses an alternating-code system. If it
hand-held transmitter and the mem-
uses an alternating-code system, program the
ory buttons 1 depends on the system of the
memory buttons 1 as described under Alternat-
respective original hand-held transmitter
ing-code hand-held transmitters.<
used.<
Alternating-code hand-held 2. Press the desired memory button 1 of the
transmitters integrated universal remote control.
To program the integrated universal remote 3. If the LED 2 flashes slowly after approx.
control, consult the operating instructions for 20 seconds, press the transmit key of the
the device to be set. You will find information original hand-held transmitter and release
there on the possibilities for synchronization or both buttons as soon as the LED 2 flashes
programming of additional hand-held transmit- rapidly.
ters. If the LED 2 does not flash rapidly after
When programming hand-held transmitters that approx. 15 seconds, alter the distance and
employ an alternating code, please observe the repeat this step.
following supplementary instructions:
Programming will be easier with the aid of
a second person.<
1. Park your vehicle within the range of the
remote-controlled device.
2. Program the integrated universal remote
control as described above in the section
Fixed-code hand-held transmitters.
3. Locate the button on the receiver of the
device to be set, e.g. on the drive unit.
4. Press the button on the receiver of the
device to be set. After step 4, you have
approx. 30 seconds for the next step 5.
5. Press the programmed memory button 1 of
the integrated universal remote control
three times.
78
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Glove compartment Center armrest*
Opening Storage compartment
The center armrest between the front seats con-
AT A GLANCE
tains either a compartment or the cover for the
mobile phone base plate* or the snap-in
adapter*.
CONTROLS
Closing
Fold cover up.
Opening
To prevent injury in the event of an acci-
The cover slides along guide rails and can be
dent, close the glove compartment after
opened fully by pushing it back and lifting it.
use while the vehicle is being driven.<
Closing
Ventilation*
Push the cover forwards.
DRIVING TIPS
Depending on your vehicle's equipment, it may
be possible to ventilate the glove compartment.
Closing
Turn the switch to the vertical position.
Depending on the temperature setting of the air
REFERENCE
79
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Connecting via the USB audio interface > Do not connect devices such as fans or
Practical interior accessories
Storage compartments
In the vehicle interior
1 Connection for audio playback: Depending on your vehicle's equipment, you
TRS connector 1/8 in/3.5 mm will find storage compartments in the doors,
2 USB interface* next to the rear seats and in the center console*.
Nets* are located in the passenger footwell and
iPod/iPhone on the backs of the front seat backrests.
To connect the iPod/iPhone, use the cable
adapter for the Apple iPod. Storage compartment on the front
For additional information, contact your MINI passenger side*
Dealer or visit the Internet at www.MINI.com
To play audio tracks over the vehicle's loud-
speaker system, connect the iPod to ports 1
and 2.
The iPod/iPhone's menu structure is supported
by the USB audio interface.
USB device
To play audio tracks over the vehicle's loud-
speaker system, connect the USB device to Opening
port 2. Briefly press the bottom edge of the cover.
Notes Closing
Do not expose the audio device to Push the cover back into its original position.
extreme environmental conditions, e.g.
To prevent injury in the event of an acci-
very high temperatures, refer to the operating
dent, close the storage compartment after
instructions of the audio device. Otherwise the
use while the vehicle is being driven.<
audio device may become damaged, which
could compromise safety while driving.<
Clothes hooks
> The USB-audio interface supplies the con-
There are clothes hooks on the grab handles in
nected audio devices with power, provided
the rear passenger compartment.
that this is supported by the audio device.
Therefore, do not connect the USB audio Items of clothing hung from the hooks
device to the power socket in the vehicle must not obstruct the driver's view. Do not
during operation. hang heavy objects from the hooks, otherwise
they could endanger the car's occupants, e.g. in
> Do not forcibly connect the plug to the USB
case of heavy braking or sudden swerving.<
interface.
80
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Cup holders and Connecting electrical
ashtray* appliances
In your MINI, you can use electrical devices such
as a flashlight, car vacuum cleaner, etc., up to
AT A GLANCE
approx. 200 watts at 12 volts, as long as one of
the following sockets is available. Avoid damag-
ing the sockets by attempting to insert plugs of
unsuitable shape or size.
CONTROLS
Two cup holders are located in the front of the
center console, another is in the rear at the back
of the center console.
Do not place glass containers in the cup
holders, as this increases the risk of injury
in the event of an accident.<
Ashtray*
The ashtray is located in one of the cup holders
DRIVING TIPS
in the center console. Pull out the cover.
Emptying
Remove the entire ashtray.
Lighter
With the engine running or the ignition switched
on, press in the cigarette lighter.
The lighter can be pulled out as soon as it pops MOBILITY
back out.
Hold or touch the hot cigarette lighter by
the knob only. Holding or touching it in
other areas could result in burns.
When leaving the car, always remove the key so
that children cannot operate the cigarette
lighter and burn themselves.<
REFERENCE
81
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
AT A GLANCE
CONTROLS
DRIVING TIPS
DRIVING TIPS
MOBILITY
REFERENCE
84
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
The risk of hydroplaning increases with declining You can increase the engine's braking effect by
tread depth on the tires, refer also to Tread shifting down, all the way to first gear if necessary.
depth on page 100. This strategy helps you avoid placing excessive
loads on the brake system. Downshifting in man-
Driving through water ual mode of the automatic transmission, page 40.
AT A GLANCE
Drive through water on the road only if it is Never drive with the clutch held down,
not deeper than 1 ft/30 cm, and then only with the transmission in neutral or with
at walking speed at the most. Otherwise, the the engine switched off; otherwise, engine brak-
vehicle's engine, the electrical systems and the ing action will not be present or there will be no
transmission may be damaged.< power assistance to the brakes or steering.
Never allow floor mats, carpets or any other
Parking brake on inclines objects to protrude into the area around the
On inclines, do not hold the vehicle with pedals, otherwise pedal function could be
the clutch; use the parking brake. Other- impaired.<
CONTROLS
wise greater clutch wear will result.<
Corrosion on brake rotors
For information on driving off using Hill Start
Assist*, refer to page 58. When the vehicle is driven only occasionally,
during extended periods when the vehicle is not
Braking safely used at all, and in operating conditions where
brake applications are less frequent, there is an
Your MINI is equipped with ABS. If you are in a
increased tendency for corrosion to form on
situation which requires full braking, it is best to
rotors, while contaminants accumulate on the
brake using maximum brake pressure. Since the
brake pads. This occurs because the minimum
vehicle maintains steering responsiveness, you
pressure which must be exerted by the pads
DRIVING TIPS
can still avoid possible obstacles with a mini-
during brake applications to clean the rotors is
mum of steering effort.
not reached.
The pulsation of the brake pedal, together with
Should corrosion form on the brake rotors, the
the sound of hydraulic regulation, indicates that
brakes will tend to respond with a pulsating effect
ABS is actively taking effect.
that even extended application will fail to cure.
drive long or steep downhill gradients in the 4 in/10 cm, otherwise the chassis could be
gear in which the least braking is required. Even damaged.<
light but consistent brake pressure can lead to For general information about vehicle care for
high temperatures, brake wear and possibly your MINI, refer to the chapter beginning on
even brake failure.< page 109.
85
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
With convenient access and automatic Expanding the cargo bay
Things to remember when driving
Cargo loading
To avoid loading the tires beyond their
approved carrying capacity, never over-
load the vehicle. Overloading can lead to over-
heating and increases the rate at which damage
develops inside the tires. The ultimate result can 1. Pull the lever.
assume the form of a sudden blow-out.<
2. Fold rear seat backrests forward.
Avoid fluid spills in the cargo bay as they
When folding the backrest back up, make
could damage the vehicle.<
sure that the seat's locking mechanisms
engage properly. Otherwise, cargo could be
Cargo bay cover thrown around in the event of sharp braking or
Do not place any objects on the cover, swerving and endanger the occupants.<
otherwise they could endanger the car's
occupants, e.g. in the case of braking or sudden Adjusting rear seat backrest*
swerving.<
Expand the cargo bay by raising the split rear
When you open the tailgate, the cargo bay cover seat backrests to a steeper angle.
is raised.
To load bulky luggage, the cover can be
removed.
1. Unhook the lift straps from the tailgate.
2. Pull the cover out of the holders toward the
rear.
86
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Determining cargo limit Load
AT A GLANCE
1. Locate the following statement on your The permissible load is the sum of the occu-
vehicle's placard*: pants' weights and the weight of the cargo. The
The combined weight of occupants greater the weight of the occupants, the less
and cargo should never exceed cargo/luggage can be transported.
CONTROLS
XXX kg or YYY lbs. Otherwise, overloading
can result in damage to the vehicle and un- Stowing cargo
stable driving conditions.< > Position heavy objects as low and as far for-
2. Determine the combined weight of the ward as possible, ideally directly behind the
driver and passengers that will be riding in rear seat backrests.
your vehicle. > Cover sharp edges and corners.
3. Subtract the combined weight of the driver > For very heavy cargo when the rear seat is
and passengers from XXX kilograms or YYY not occupied, secure each safety belt in the
DRIVING TIPS
pounds. respective opposite buckle.
4. The resulting figure equals the available > Do not stack higher than the top edge of the
amount of cargo and luggage load capacity. backrests.
For example, if the XXX amount equals
1,400 lbs. and there will be four 150-lb. pas-
sengers in your vehicle, the amount of avail-
able cargo and luggage load capacity is
650 lbs:
1,400 lbs. minus 750 lbs. = 650 lbs.
5. Determine the combined weight of luggage MOBILITY
and cargo being loaded on the vehicle. That
weight may not safely exceed the available
cargo and luggage load capacity calculated
in step 4.
6. If your vehicle will be towing a trailer, part of
the load from your trailer will be transferred
to your vehicle. Consult the manual for
transporting a trailer to determine how this
may reduce the available cargo and luggage
REFERENCE
87
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Securing cargo Mounting points
Things to remember when driving
> Secure smaller and lighter items using Remove the cover panel.
retaining or draw straps*.
> Heavy-duty cargo straps* for securing larger Loading roof-mounted luggage rack
and heavier objects are available at your Because roof racks raise the vehicle's center of
MINI Dealer. Four lashing eyes are provided gravity when loaded, they have a major effect
for attaching the cargo straps. Two of them on vehicle handling and steering response.
are located on the forward wall of the cargo You should therefore always remember not to
bay. exceed the approved roof load capacity, the
Comply with the information enclosed with approved gross vehicle weight or the axle loads
the load-securing devices. when loading the rack.
Always position and secure the cargo as You can find the applicable data under Weights
described above, so that it cannot endan- on page 144.
ger the car's occupants, for example if sudden The roof load must be distributed uniformly and
braking or swerves are necessary. should not be too large in area. Heavy items
Do not exceed the approved gross weight and should always be placed at the bottom.
axle loads (see page 144); otherwise the vehi-
When loading, make sure that there is sufficient
cle's operating safety is no longer assured and it
space for the movement of the glass sunroof
will not be in compliance with the certification
and that no objects protrude into the swiveling
regulations.
area of the tailgate; otherwise damage can
Heavy or hard objects should not be carried
occur.
loose inside the car, since they could be thrown
around, for example as a result of heavy braking, Fasten roof-mounted cargo correctly and
sudden swerves, etc., and endanger the occu- securely to prevent it from shifting or falling off
pants. Do not secure cargo using the fastening during the trip.
points for the tether strap (page 36); they may Drive smoothly. Avoid sudden acceleration and
become damaged.< braking maneuvers, and take corners gently.
88
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Remove unnecessary cargo Coasting
Additional weight increases fuel consumption. When approaching a red traffic light, take your
foot off the accelerator and let the vehicle coast
Remove attached parts no longer in use to a halt in the highest suitable gear.
Remove auxiliary mirrors, roof- or rear-mounted On a downhill gradient, take your foot off the
AT A GLANCE
luggage racks whenever you are not using accelerator and let the vehicle coast in a suitable
them. gear.
Attached parts on the vehicle affect its aerody- Fuel supply is shut off automatically when the
namics and increase fuel consumption. vehicle is coasting.
Check tire inflation pressure regularly Switch off the engine during lengthy
Check and, if necessary, correct tire inflation stops
pressure at least twice a month and before start- Switch off the engine when stopping for lengthy
ing on a long trip. periods, e.g. at traffic lights, railroad crossings or
CONTROLS
Low inflation pressure increases rolling resis- in traffic congestions.
tance and thus leads to greater fuel consump-
tion and tire wear. Have the vehicle serviced
Have your vehicle serviced regularly to achieve
Drive off immediately good economy and a long vehicle life. The man-
Do not wait for the engine to warm up while the ufacturer of your MINI recommends having the
vehicle remains stationary. Start driving right vehicle serviced by a MINI Dealer. Also note the
away, but at moderate engine speeds. This is the MINI Maintenance System, page 107.
fastest way for the cold engine to reach its oper-
DRIVING TIPS
ating temperature.
89
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
AT A GLANCE
CONTROLS
DRIVING TIPS
MOBILITY
MOBILITY
REFERENCE
Switch off the engine before refueling, Manually releasing the fuel filler door
otherwise fuel cannot be added to the In the event of an electrical malfunction, you can
tank and a message will be displayed.< manually unlock the fuel filler door:
Take all precautionary measures and 1. Remove the cover from the left-hand side-
observe all applicable regulations when wall of the cargo bay.
handling fuel. Do not carry any spare fuel con-
tainers in your vehicle. They can develop a leak
and cause an explosion or cause a fire in the
event of an accident.<
92
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Fuel tank capacity The use of poor-quality fuels may result in
If the range displayed is less than driveability, starting and stalling problems
30 miles/50 km, be sure to refuel; other- especially under certain environmental condi-
wise engine functions are not guaranteed and tions such as high ambient temperature and
damage could occur.< high altitude.
AT A GLANCE
Should you encounter driveability problems
MINI Cooper, MINI Cooper S which you suspect could be related to the fuel
you are using, we recommend that you respond
Approx. 13.2 US gallons/50 liters, including the
by switching to a recognized high-quality brand
reserve capacity of 2.1 US gallons/8 liters.
such as gasoline that is advertised as Top Tier
Detergent Gasoline.
Failure to comply with these recommendations
Fuel specifications may also result in unscheduled maintenance.<
Do not fill the tank with leaded fuel, as this
would cause damage to the catalytic con-
CONTROLS
verter.
Do not fill the tank with E85, i.e. fuel containing
85% ethanol, nor with FlexFuel. Otherwise the
engine and fuel supply system will be dam-
aged.<
Required fuel
DRIVING TIPS
This gasoline is highly recommended.
However, you may also use gasoline with less
AKI. The minimum AKI Rating is 87.
If you use gasoline with this minimum AKI Rat-
ing, the engine may produce knocking sounds
when starting at high outside temperatures. This
has no effect on the engine life.
Do not use any gasoline below the speci-
fied minimum fuel grade. Otherwise the MOBILITY
engine could be damaged.<
93
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Wheels and tires
Wheels and tires
After adjusting the tire inflation pressure, These tire inflation pressures can also be found
reinitialize the flat tire monitor (page 59), on the driver's-side door post when the driver's
or reset the tire pressure control (page 61).< door is open.
94
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Tire inflation pressures for driving above
100 mph or 160 km/h
In order to drive at maximum speeds in
excess of 100 mph or 160 km/h, adjust
pressures to the respective tire inflation pres-
AT A GLANCE
sures listed on the following pages in the col-
umns for traveling speeds including those
exceeding 100 mph or 160 km/h. Otherwise tire
damage and accidents could occur.<
Observe all national and local maximum speed
limits, otherwise violations of the laws could
occur.
CONTROLS
DRIVING TIPS
MOBILITY
REFERENCE
95
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
MINI Cooper tire inflation pressures
Wheels and tires
Speeds up to a
max. of 100 mph / Speeds including those exceeding
160 km/h 100 mph / 160 km/h
175/65 R 15 84 T M+S
175/65 R 15 84 H M+S
175/65 R 15 84 H
175/60 R 16 82 H M+S RSC
195/55 R 16 87 H RSC
195/55 R 16 87 H M+S RSC 33/230 33/230 33/230 33/230 38/260 38/260
195/55 R 16 87 V M+S RSC
205/45 R 17 84 V M+S RSC
205/45 R 17 84 V RSC
205/45 R 17 84 V M+S RSC
205/40 R 18 82 W RSC
Emergency wheel:
60/420 60/420 60/420 60/420
115/70 R 15 90 M
More details on the permissible load and weights can be found on page 144.
96
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
MINI Cooper S tire inflation pressures
Speeds up to a
AT A GLANCE
max. of 100 mph / Speeds including those exceeding
160 km/h 100 mph / 160 km/h
CONTROLS
195/55 R 16 87 V RSC
195/55 R 16 87 H M+S RSC 33/230 33/230 33/230 33/230 38/260 38/260
195/55 R 16 87 V M+S RSC
DRIVING TIPS
More details on the permissible load and weights can be found on page 144.
MOBILITY
REFERENCE
97
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
MINI John Cooper Works tire inflation pressure
Wheels and tires
Speeds up to a
max. of 100 mph / Speeds including those exceeding
160 km/h 100 mph / 160 km/h
More details on the permissible load and weights can be found on page 144.
98
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Tire coding DOT Quality Grades
Tread wear
Knowledge of the labeling on the side of the tire Traction AA A B C
makes it easier to identify and choose the right Temperature A B C
tires.
All passenger car tires must conform to
AT A GLANCE
Federal Safety Requirements in addition
Tire size
to these grades.<
e.g. 225/45 R 17 91 V
Nominal width in mm Tread wear
Aspect ratio in The tread wear grade is a comparative rating
Radial belt construction based on the wear rate of the tire when tested
Rim diameter in inches under controlled conditions on a specified gov-
Load rating, ernment test course. For example, a tire graded
not on ZR tires 150 would wear one and one-half (1) times as
CONTROLS
Speed code letter, in well on the government course as a tire graded
front of the R on ZR tires 100. The relative performance of tires depends
upon the actual conditions of their use, how-
ever, and may depart significantly from the
Speed code letter
norm due to variations in driving habits, service
Q = up to 100 mph or 160 km/h practices and differences in road characteristics
T = up to 118 mph or 190 km/h and climate.
H = up to 131 mph or 210 km/h
Traction
V = up to 150 mph or 240 km/h
DRIVING TIPS
The traction grades, from highest to lowest, are
W = up to 167 mph or 270 km/h
AA, A, B, and C.
Y = up to 186 mph or 300 km/h Those grades represent the tire's ability to stop
on wet pavement as measured under controlled
Tire Identification Number conditions on specified government test sur-
Tires with DOT codes meet the guidelines of the faces of asphalt and concrete. A tire marked C
US Department of Transportation. may have poor traction performance.
DOT code: The traction grade assigned to this tire is
based on straight-ahead braking traction
e.g. DOT xxxx xxx 3408 tests, and does not include acceleration, corner- MOBILITY
Manufacturer's ing, hydroplaning, or peak traction characteris-
code for tire make tics.<
Tire size and
tire design Temperature
Tire age The temperature grades are A, the highest, B,
and C, representing the tire's resistance to the
Uniform Tire Quality Grading generation of heat and its ability to dissipate
Quality grades can be found where applicable heat when tested under controlled conditions
on the tire sidewall between tread shoulder and on a specified indoor laboratory test wheel. Sus-
REFERENCE
maximum section width. For example: tained high temperature can cause the material
Tread wear 200 Traction AA of the tire to degenerate and reduce tire life, and
Temperature A excessive temperature can lead to sudden tire
failure. The grade C corresponds to a level of
performance which all passenger car tires must
99
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
meet under the Federal Motor Vehicle Safety Minimum tread depth
Wheels and tires
Tire age
Winter tires
The manufacturing date of tires is contained in
When winter tires wear down past a tread depth
the tire coding:
of 1/6 in/4 mm, they become perceptibly less
DOT ... 3408 means that the tire was manufac-
suitable for winter conditions. In the interest of
tured in week 34 of 2008.
safety, new tires should be installed.
100
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
For various reasons, such as the development of Correct wheels and tires
brittleness, the manufacturer of your MINI rec- The manufacturer of your MINI recom-
ommends tire replacement after no more than mends mounting only wheels and tires
6 years, regardless of the actual wear of the that it has specifically approved for use on your
tires. particular model. Although other wheels and
AT A GLANCE
tires may theoretically have the same dimen-
sions, variations in factors such as manufactur-
Run-Flat Tires* ing tolerances can result in contact between tire
and bodywork, ultimately leading to serious
accidents. The manufacturer of your MINI can-
not evaluate non-approved wheels and tires to
determine if they are suited for use, and there-
fore cannot ensure the operating safety of the
vehicle if they are mounted.<
CONTROLS
Your MINI Dealer will be glad to inform you
about the correct wheel and tire combination for
your vehicle.
The correct combination of wheels and tires is
The symbol identifying Run-Flat Tires is a circle also necessary to ensure reliable operation of
with the letters RSC on the sidewall. various vehicle systems such as ABS and DSC.
Run-Flat Tires comprise a conditionally self-sup-
To maintain good handling and vehicle
porting tire and a special rim. The reinforcement
response, use only tires of a single brand and
in the sidewalls ensures that the tire can con-
tread configuration. After a tire has been dam-
DRIVING TIPS
tinue to be used subject to certain restrictions,
aged, mount the previous wheel and tire combi-
even if depressurized.
nation again as soon as possible.
For information on continuing to drive with a flat
tire, refer to Indication of a flat tire, page 60. Wheels with Tire Pressure Monitor TPM
electronics
When mounting new tires or changing over from
New wheels and tires summer to winter tires, or vice versa, only use
wheels with TPM electronics; otherwise the Tire
Have new wheels and tires mounted only
Pressure Monitor may not be able to detect a
by your MINI Dealer or a specialized tire
puncture, refer to page 62. Your MINI Dealer will MOBILITY
shop that has specially trained personnel work-
be glad to advise you.
ing in accordance with the specifications of the
MINI manufacturer. If this work is not carried out
properly, there is a danger of subsequent dam-
age and related safety hazards. Make sure that
the new wheels are balanced.<
Retreaded tires
The manufacturer of your MINI recom-
REFERENCE
101
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Recommended tire brands Storage
Wheels and tires
102
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Under the bonnet
Do not work on the car unless you possess Closing
the necessary technical knowledge. If you
AT A GLANCE
are not familiar with the regulations to be
observed, have the necessary work on your
vehicle carried out only by a MINI Dealer or a
workshop that has specially trained personnel
working in accordance with the specifications of
the MINI manufacturer. If this work is not carried
out properly, there is a danger of subsequent
damage and related safety hazards.<
CONTROLS
Bonnet 40 cm with momentum. It must be clearly heard
to engage.
Releasing If you notice any signs while driving your
vehicle that the bonnet is not completely
closed, stop at once and close it securely.
Make sure that the closing path of the bonnet is
clear, otherwise injuries may result.<
DRIVING TIPS
Pull the lever.
Do not clean the windshield and head-
lamps if the bonnet is unlocked as this
may damage the headlamp washer system*.<
MOBILITY
Opening
REFERENCE
103
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Important parts of the engine compartment
Under the bonnet
Engine oil
The engine oil consumption is dependent on
driving style and driving conditions.
104
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Adding engine oil You can also call MINI USA at
1-800-831-1117 or visit the website
www.miniusa.com to obtain this information.
Viscosity grades
AT A GLANCE
Viscosity is a measure of an oil's flow rating and
is categorized in SAE classes.
The correct SAE grade for your MINI is deter-
mined by the climatic conditions of the region in
which you normally drive your MINI.
Do not add the maximum quantity of 1 US The approved oils are SAE 0W-40, 0W-30,
quart/1 liter of engine oil until the oil level has 5W-40 and 5W-30.<
dropped to just above the lower mark on the These oils can be used for driving at all outside
dipstick, page 104. temperatures.
CONTROLS
Add oil within the next 30 miles/50 km,
otherwise the engine could be dam-
aged.<
Keep oils, greases, etc. out of the reach of Coolant
children and comply with the warnings on
the containers. Otherwise, health hazards may Do not add coolant to the cooling system
result.< when the engine is hot. Escaping coolant
can cause burns.<
Oil change
DRIVING TIPS
Coolant consists of half water and half additive.
Have the oil changed only by a MINI Dealer or a Not all commercially available additives are suit-
workshop that has specially trained personnel able for your MINI. Your MINI Dealer knows
working in accordance with the specifications of which additives are suitable and will be glad to
the MINI manufacturer. advise you.
Only use suitable additives, otherwise
Approved engine oils engine damage may result. Because addi-
The quality of the engine oil selected has critical tives are harmful to your health, it is important
significance for the operation and service life of to follow the instructions on the containers.<
an engine. Based on extensive testing, the man- Comply with the appropriate environmen- MOBILITY
ufacturer of your MINI approves only certain tal protection regulations when disposing
grades of engine oil on a regular basis. of coolant additives.<
Only use High Performance Synthetic Oil
approved by the manufacturer of your MINI. Checking coolant level
If MINI High Performance Synthetic Oil is not 1. Do not open the bonnet until the engine has
available, you can add small quantities of cooled down.
another synthetic oil in between oil changes. 2. Turn the cap of the expansion tank a little
Only use oils with the API SM specification or counterclockwise to allow any accumulated
higher. pressure to escape, then continue turning to
REFERENCE
105
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
4. If the coolant is low, slowly add coolant up to
Under the bonnet
106
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Maintenance
MINI Maintenance System Make sure that the date in the tachometer
AT A GLANCE
is always set correctly, page 54; otherwise
the effectiveness of Condition Based Service CBS
is not assured.<
CONTROLS
Service Guide Booklet for Canadian models for
The MINI Maintenance System supports the
additional information on service requirements.
preservation of the traffic and operating safety
of your MINI. The objective is to optimize efforts The manufacturer of the MINI recom-
with respect to minimal vehicle maintenance mends that you have service and repair
costs. operations performed at your MINI Dealer.
Take the time to ensure that these service pro-
If and when you come to sell your MINI, a com-
cedures are confirmed by entries in your vehi-
prehensive record of servicing will prove a signif-
cle's Service and Warranty Information Booklet
icant benefit.
for US models and Warranty and Service Guide
DRIVING TIPS
Booklet for Canadian models. These entries ver-
Condition Based Service CBS
ify that your vehicle has received the specified
Sensors and special algorithms take the different regular maintenance.<
driving conditions of your MINI into account.
Condition Based Service uses this to determine
the current and future service requirements. By
Socket for Onboard
letting you define a service and maintenance
regimen that reflects your own individual Diagnosis OBD
requirements, the system builds the basis for
trouble-free driving. MOBILITY
In the tachometer, you can have the remaining
times or distances for selected maintenance
tasks and any legally prescribed dates displayed,
page 52.
out this data from the remote control unit, and emissions can be checked by a device via the
propose an optimized maintenance approach. OBD socket.
Whenever you take your car in for servicing you This socket is located to the left of the driver's
should therefore hand your MINI Dealer the side, on the bottom of the instrument panel.
remote control unit that you last used.
107
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Exhaust emission values
Maintenance
108
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Care
AT A GLANCE
because drops of water can penetrate
Regular cleaning and care helps to maintain the around the windows.<
value of your MINI. Before driving into the car wash, check if the sys-
The manufacturer of your MINI recommends tem is suitable for your MINI. Observe the fol-
using manufacturer-approved products to clean lowing points:
and care for your vehicle. > Dimensions of the vehicle, page 143
MINI Service would be pleased to advise you on > If necessary: Fold in the outside mirrors
cleaning and care products and services for your (page 33)
MINI.
> Maximum permissible tire width
The ingredients of original MINI CareProd-
CONTROLS
Preparations for driving into the car wash:
ucts have been tested, and the products
have been tested in the laboratory and in prac- > Unscrew the rod antenna.
tice. They offer optimum care and protection for > Deactivate the rain sensor* to prevent unin-
your vehicle.< tentional wiping.
Do not use any cleansers containing alco- > Deactivate the rear windshield wiper and
hol or solvents as these may cause dam- protect it from damage. Ask the car wash
age.< operator about measures that can be taken
Cleaning agents may contain hazardous to protect the wipers.
DRIVING TIPS
or health-damaging substances. Follow > Remove additional detachable body com-
the warning and hazard instructions on the ponents such as spoilers or telephone
packaging. For interior cleaning, always open antennas that could be damaged.
the doors or windows of the vehicle.
Do not use any products that are not intended Automatic transmission
for cleaning the vehicle.<
Before driving into the car wash, make sure that
the vehicle can roll:
1. Place the remote control, even with conve-
External care nient access, in the ignition lock.
MOBILITY
2. Move the selector lever to position N.
Washing your vehicle
Especially during the winter months the 3. Release the parking brake.
vehicle should be frequently washed. Dirt 4. Switch off the engine.
and road salt can damage the vehicle.< 5. Insert the remote control in the ignition lock
After washing the vehicle, apply the so that the vehicle can roll.
brakes briefly to dry them, otherwise
water can reduce braking efficiency over the Steam jets/high-pressure washers
short term and the brake rotors can corrode.< When using steam jets or high-pressure
washers, ensure that you maintain a suffi-
REFERENCE
109
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Observe the operating instructions for high- In some regions, environmental factors can
Care
Headlamps Preservation
Do not wipe dry and do not use abrasive or cor- Preservation is necessary when water no longer
rosive cleaning agents. Remove dirt and con- beads on the clean paint surface. To preserve
tamination, such as insects, by soaking with the paint, only use preservatives that contain
shampoo and then washing with plenty of carnauba or synthetic waxes.
water.
Rubber seals
Do not remove accumulated ice and snow with
an ice scraper; use window de-icers instead. Only treat with water or rubber care products.
Do not use silicon sprays or other silicon-
Windows containing care products on rubber seals,
Clean the outside and inside of the windows and otherwise noise and damage could occur.<
mirrors with a window cleaner.
Chrome parts*
Do not clean the mirrors with cleaners
containing quartz.< Carefully clean vehicle parts such as the radiator
grill and door handles with copious quantities of
Wiper blades water and, if necessary, a shampoo additive,
especially when contaminated with road salt.
Clean with soapy water and change regularly to
For additional treatment, use chrome polish.
prevent the formation of streaks
Wax, preservatives and dirt on the win- Light-alloy wheels*
dows cause streaks when the windshield
The system produces brake dust that collects on
wipers are on, and can cause premature wear of
the light alloy wheels. Clean them regularly with
the wiper blades and interfere with the rain sen-
acid-free wheel cleaner.
sor.<
Do not use aggressive, acid-containing
Paintwork, care highly alkaline or abrasive cleansers or
steam jets above 1407/606 as they may
Regular care contributes greatly to driving safety
cause damage.<
and value retention.
110
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
External sensors Floor mats can be removed to be cleaned. When
Keep the outside sensors on the vehicle putting the floor mats, back in, make sure that
such as the Park Distance Control clean the seat rails do not extend over the floor mats
and ice-free to ensure that they function prop- as this may damage them.
erly.< Lint on floor mats arises from manufacturing
AT A GLANCE
and can be removed by repeated vacuuming.
CONTROLS
suitable interior cleaners. Observe the instruc- Only clean with water and, if necessary, solvent-
tions on the packaging. free plastic cleaners.
Clean upholstery up to the seams. Do not Do not use solvents such as alcohol, lac-
rub forcefully.< quer thinner, cold cleaners, fuel, or similar,
as these will damage the surfaces.<
Velcro fasteners on pants or other items of
clothing can damage seat covers. Make
Decorative strips*
sure that all Velcro fasteners are closed.<
Only clean decorative strips with moist cloths.
Wipe dry with a soft cloth.
DRIVING TIPS
Leather/leather coverings*
The leather processed by the manufac-
Safety belts
turer of your MINI is a high-quality natural
product. Light variations in the grain is one of Do not use cleansers since they can
the typical properties of natural leather.< destroy the fabric.<
Dust and road grit in the pores and folds of the
Displays
leather have an abrasive effect, leading to
increased wear and causing the leather surface To clean displays such as radios or display ele-
to become brittle prematurely. The leather ments, use a display cleaning cloth or a soft,
should therefore be regularly cleaned with a non-scratching, lint-free cloth. MOBILITY
cloth or a vacuum cleaner. Avoid pressing too hard when cleaning
Especially when the leather has a light color, it the display as this can cause damage.<
should be cleaned regularly since it tends to get Do not use chemical or abrasive house-
heavily soiled. hold cleaning agents. Keep fluids of any
Treat the leather twice a year using a leather kind away from the device. Surfaces or electrical
lotion since dirt and grease will gradually attack components may otherwise become corroded
the leather's protective layer. or damaged.<
You can use a vacuum cleaner on carpets and Do not use cleaning CDs as this could
floor mats, or clean them with interior cleaners damage parts of the drive.<
when they are very dirty.
111
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Vehicle storage
Care
112
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Replacing components
AT A GLANCE
wiper arms are against the windshield
before you open the bonnet.<
CONTROLS
Your vehicle comes with an onboard tool kit that
varies with the equipment version; it is stored
underneath the level load floor.
> Mobility System with onboard tool kit and 1. Fold up the wiper arm.
tire change set* 117 2. Rotate the wiper blade toward the back as
> Tire change set with onboard tool kit for far as it will go, arrow.
space-saver spare tire 119 3. Press the wiper blade against the limit and
thus out of the mounting.
DRIVING TIPS
4. Press the new wiper blade into the fixture
Wiper blades until it engages audibly.
shield.
at your MINI Dealer.
5. Pull the wiper blade past the wiper arm
When working on electrical systems, always
toward the top.
begin by switching off the consumer in
6. Insert the new wiper blade. question, otherwise short circuits could result. To
7. Press into position until you hear it engage. avoid possible injury or equipment damage when
113
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
replacing bulbs, observe any instructions provided Be careful when installing the cover, oth-
Replacing components
by the bulb manufacturer.< erwise leaks could occur and cause dam-
Caring for headlamps, refer to page 110. age to the headlamp system.<
114
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
2. Push on the catch, arrow 1, and unplug the 3. Remove the inside cover.
connector, arrow 2. To do so, turn the cover counterclockwise.
AT A GLANCE
3. To insert the new bulb and replace the 4. Screw out the bulb counterclockwise.
cover, proceed in reverse order.
CONTROLS
Turn signal indicators, parking lamps,
roadside parking lamps and fog lamps
DRIVING TIPS
ers, proceed in reverse order.
115
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Replacing a fog lamp bulb Tail lamps
Replacing components
H8 bulb, 35 watts
1. Turn in the wheel.
2. Remove cover 2.
To do so, turn the cover counterclockwise.
3. Screw out the lower bulb counterclockwise.
116
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Rear fog lamp* Repairing a flat tire
21 watt bulb, P 21 W
Safety measures in the event of a break-
Access to the lamp via the back or underside of
down:
the bumper.
Park the vehicle as far as possible from moving
AT A GLANCE
The illustration shows the fog lamp in the traffic and switch on the hazard warning flash-
bumper of the MINI Cooper. ers.
Turn the steering wheel until the front wheels
are in the straight-ahead position and engage
the steering wheel lock. Engage the parking
brake and shift into 1st or reverse gear or place
the selector lever in position P.
All passengers should be outside the vehicle and
in a safe place, e.g. behind a guardrail.
Erect a warning triangle or warning flasher at the
CONTROLS
appropriate distance if necessary. Comply with
all safety guidelines and regulations.<
1. Screw out the bulb holder counterclockwise. In the event of a flat tire, different procedures
2. Screw out and replace the bulb. should be followed depending on the equip-
3. To insert the new bulb and bulb holder, pro- ment included in your vehicle:
ceed in reverse order. > MINI Mobility System, refer to the following
section
License plate lamps > Run-Flat Tires, page 101
DRIVING TIPS
5 watt bulb, C 5 W > Tire change with space-saver spare tire,
page 119
MOBILITY
117
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
5 Flat screwdriver/Phillips screwdriver, towing In the event of a lost or dirty valve core
Replacing components
Liquid sealant
4. Screw out the valve core with the valve Do not run the compressor for longer
remover. The valve remover is located in a than 6 minutes, otherwise the device
package with the filling hose. will overheat and possibly be damaged.<
5. Remove the cap from the filling hose. If an air pressure of 26 psi/180 kPa is not
reached:
6. Push the filling hose onto the tire valve.
1. Unscrew hose 1 and drive the vehicle for-
7. Hold the filling canister with the cap down
ward and backward about 33 ft/10 m to dis-
and squeeze.
tribute the liquid sealant in the tires evenly.
8. Squeeze the entire contents of the canister
2. Repeat the procedure.
into the tire.
If an air pressure of 26 psi/180 kPa still
9. Remove the filling hose.
cannot be reached, the tire is too severely
10. Screw the valve core into the tire valve with damaged. Please contact the nearest MINI
the valve remover. Dealer.<
118
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Distributing liquid sealant Changing wheels
Immediately drive for approx. 10 minutes, so
that the liquid sealant is uniformly distributed. Space-saver spare tire*
Do not exceed speeds of 40 mph/ To change a space-saver spare tire, proceed as
60 km/h.
AT A GLANCE
follows:
If possible, do not drop below 10 mph/
> Remove space-saver spare tire, page 120
20 km/h.<
> Prepare for tire change, page 121
Checking tire inflation pressure > Jack up vehicle, page 121
1. After driving for approx. 10 minutes, pull > Mount space-saver spare tire, page 121
over at a suitable location. > Tighten lug bolts, page 121
2. Screw the hose with manometer back onto > Drive with space-saver spare tire, page 120
the tire valve.
3. Check the tire inflation pressure. Tire change set for a space-saver spare
CONTROLS
The tire pressure must be at least tire*
18 psi/130 kPa. If it is not, do not con-
tinue driving.<
If a tire pressure of at least 18 psi/130 kPa is dis-
played:
1. Switch on the compressor. Correct the tire
inflation pressure to the specified value,
page 94.
DRIVING TIPS
2. Replace the tire as soon as possible.
119
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Removing the space-saver spare tire 9. Pull the space-saver spare tire underneath
Replacing components
The screw connection of the space-saver spare the vehicle out towards the rear.
tire is under the floor mat in the cargo bay, on
the base of the storage compartment for the tire
change set.
1. Unscrew the screw connection with the spe-
cial wrench.
2. Take out the cover panel.
120
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Preparing for a tire change 1. Place the jack at the jacking point closest to
Observe the safety precautions regarding the wheel.
flat tires on page 117.< The jack base must be perpendicular to the
surface beneath the jacking point.
Additional safety measures when chang-
ing tires:
AT A GLANCE
Only change the tire when parked on a surface
that is level, firm and not slippery.
The vehicle or the jack could slip sideways on
soft or slippery support surfaces, such as snow,
ice, flagstones, etc.
Do not use a wooden block or similar object as a
support base for the jack, as this would prevent
it from extending to its full support height and
reduce its load-carrying capacity.
2. During jacking up, insert the jack head in the
CONTROLS
Do not lie under the vehicle or start the engine
square recess of the jacking point.
when the vehicle is supported by the jack; other-
wise there is a risk of fatal injury.< 3. Jack the vehicle up until the wheel you are
changing is raised off the ground.
1. Place the foldable chock* behind the front
wheel on the other side of the vehicle or in
front of the wheel if the vehicle is on an
Mounting the space-saver spare tire
incline. If the wheel is changed on a surface 1. Unscrew the lug bolts and remove the
with a more severe slope, take additional wheel.
precautions to secure the vehicle from roll- 2. Remove accumulations of mud or dirt from
DRIVING TIPS
ing. the mounting surfaces of the wheel and
2. Uncover the lug bolts if necessary. hub. Clean the lug bolts.
If the wheel is equipped with a hub cover, 3. Lift the new wheel into place.
pry it off using the screwdriver from the tire 4. Screw at least two lug bolts finger-tight into
change kit. opposite bolt holes.
3. Loosen the lug bolts by a half turn. 5. Screw in the remaining bolts.
6. Tighten all the lug bolts firmly in a diagonal
Jacking up the vehicle pattern.
7. Lower the vehicle. MOBILITY
8. Remove the jack.
safety hazard.<
wheels only. Do not attempt to raise
another vehicle model with it or to raise any load Tightening torque: 103.3 lb ft or 140 Nm.
of any kind. To do so could cause accidents and Replace the defective tire as soon as possible
personal injury.< and have the new wheel/tire assembly bal-
anced.
121
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Vehicle battery Fuses
Replacing components
Have any work on the battery, including Do not attempt to repair a blown fuse or
battery replacement, carried out only by a replace it with a fuse of a different color or
MINI Dealer or a workshop that has specially Ampere rating. To do this could cause a fire in
trained personnel working in accordance with the vehicle resulting from a circuit overload.
the specifications of the MINI manufacturer.< Have the fuse changed only by a MINI Dealer or
a workshop that has specially trained personnel
Battery care working in accordance with the specifications of
The battery is 100% maintenance-free, the the MINI manufacturer.<
electrolyte will last for the life of the battery A fuse allocation diagram is located on the inside
when the vehicle is operated in a temperate cli- of the fuse box cover panels.
mate.
In the engine compartment
Charging the battery
Only charge the battery in the vehicle when the
engine is off. Connections, refer to Jump starting
on page 123.
Disposal
After replacing old batteries, return the
used batteries to your MINI Dealer or to a
recycling point. Maintain the battery in an
upright position for transport and storage.
Always secure the battery against tipping over Opening the cover
during transport.< Press the latch.
122
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Giving and receiving assistance
AT A GLANCE
The Roadside Assistance service is there to assist
you around the clock in the event of a breakdown,
including on weekends and public holidays.
The phone numbers of the Roadside Assistance
in your home country can be found in the Con-
tact brochure.
CONTROLS
Some of the articles contained in the first aid On the inside of the tailgate.
pouch have a limited service life. Therefore, Press the tab to take it out.
check the expiration dates of the contents regu-
larly and replace any items in good time, if nec-
essary.
DRIVING TIPS
In the cargo bay under the loading sill.
Open the center lock to take it out.
123
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Preparation Body ground in MINI:
Giving and receiving assistance
124
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Using a tow fitting Front
The screw-in tow fitting must always be carried
in the car. It can be screwed in at the front or
rear of the MINI.
It is stored in the onboard tool kit in the cargo
AT A GLANCE
bay underneath the cover on the right-hand
side, page 113.
Use only the tow fitting provided with the
vehicle and screw it all the way in. Use the
tow fitting for towing on paved roads only. Avoid
lateral loading of the tow fitting, e.g. do not lift
Rear
the vehicle by the tow fitting. Otherwise the tow
fitting and the vehicle could be damaged.<
CONTROLS
Access to screw thread
Push out the cover of the towing eye out of the
recess in the bumper.
DRIVING TIPS
Being towed
Make sure that the ignition is switched on, MOBILITY
refer to page 37, otherwise the low
beams, tail lamps, turn signal indicators and
windshield wipers may be unavailable. Do not
tow the vehicle with just the rear axle raised, as
this would allow the steering to turn. <
There is no power assist while the engine is off.
Thus, braking and steering will require increased
effort.
Switch on the hazard warning flashers, depend-
REFERENCE
Manual transmission
Gearshift lever in neutral position.
125
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Automatic transmission Do not lift the vehicle by a tow fitting or
Giving and receiving assistance
Tow vehicles with automatic transmission body and chassis parts, otherwise damage
only with a tow truck or with the front may result.<
wheels lifted; otherwise the transmission can be
damaged.<
126
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Tow-starting
Avoid tow-starting the vehicle whenever possi-
ble; instead, jump-start the engine, page 123.
Vehicles with a catalytic converter should only
be tow-started when the engine is cold, vehicles
AT A GLANCE
with an automatic transmission cannot be tow-
started at all.
1. Switch on hazard warning flashers, comply
with local regulations.
2. Switch on the ignition, page 37.
3. Shift into 3rd gear.
4. Have the vehicle tow-started with the clutch
completely depressed and then slowly
release the clutch. After the engine starts,
CONTROLS
immediately depress the clutch completely
again.
5. Stop at a suitable location, remove the tow
bar or rope and switch off the hazard warn-
ing flashers.
6. Have the vehicle checked.
DRIVING TIPS
MOBILITY
REFERENCE
127
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Indicator and warning lamps
Indicator and warning lamps
1 2 Cause What to do
Turn signals
Indication in US models
128
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
1 2 Cause What to do
Lights up briefly:
AT A GLANCE
remain in the tank
Remains on:
CONTROLS
Ignition switched on and driver's door Switch off the ignition, page 37, or
open close the driver's door.
Lamps still on
DRIVING TIPS
Door open
Clubdoor open
Splitdoor open
MOBILITY
Bonnet open
Tailgate open
Gas cap missing or loose Make sure that the gas cap is correctly
REFERENCE
129
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Indicator and warning lamps
1 2 Cause What to do
Window washer fluid level too low Add washer fluid as soon as possible,
page 44.
Lights up in yellow:
Battery in remote control discharged Use the remote control for a longer
journey or, in cars with convenient
access, replace the battery.
Belt tensioners and/or airbag system Have the system checked immedi-
failed ately. Fasten the safety belts anyway.
Lights up:
Lights up in red:
Lights up in yellow:
Full engine power no longer available You can continue your journey, but
moderate your speed and exercise
due caution. Have the engine
checked as soon as possible.
130
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
1 2 Cause What to do
Engine malfunction under high load. You can continue your journey, but
AT A GLANCE
High engine load will result in dam- moderate your speed and exercise
age to the catalytic converter due caution. Have the vehicle
checked without delay.
Engine malfunction with adverse You can continue your journey, but
effect on exhaust emissions moderate your speed and exercise
due caution. Have the car checked as
soon as possible.
CONTROLS
Lights up in red:
DRIVING TIPS
Lights up in yellow:
Lights up in red:
Lights up in yellow:
Battery charge level very low, battery Have the battery checked as soon as
aged or not securely connected possible.
Indication in US models
REFERENCE
131
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Indicator and warning lamps
1 2 Cause What to do
Indication in US models
Lights up in red:
Brake fluid level too low Brake pedal travel may be markedly
longer. Stop immediately. Contact the
nearest MINI Dealer.
Lights up in yellow:
Hill Start Assist failed. The car will not Have the system checked as soon as
be held in place after the brake is possible.
released
Lights up in red:
Brake fluid level too low Brake pedal travel may be markedly
longer. Stop immediately. Contact the
nearest MINI Dealer.
Lights up in yellow:
Hill Start Assist failed. The car will not Have the system checked as soon as
be held in place after the brake is possible.
released
Indication in US models
132
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
1 2 Cause What to do
Indication in US models
AT A GLANCE
Contact your MINI Dealer.
CONTROLS
Vehicle electronics failed You cannot continue your journey.
Contact your MINI Dealer.
DRIVING TIPS
> ignition malfunctioning. Engine
restart only possible when brake
is depressed or
> lighting system failed. Low
beams/tail lamps and brake
lamps still operational. All other
lamps failed
Lights up in yellow:
MOBILITY
> Control of the brake lamps failed You can continue your journey, but
or moderate your speed and exercise
> fuel supply malfunctioning due caution. Have the system in ques-
tion checked without delay.
Flashing:
Dynamic Stability Control DSC or
Dynamic Traction Control DTC is con-
trolling drive and braking forces, refer
REFERENCE
also to page 56
133
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Indicator and warning lamps
1 2 Cause What to do
The dynamic stability control (DSC) Driving stability limited during accel-
and dynamic traction control (DTC) eration and cornering.
are deactivated (see page 56) Driving style must be adjusted.
The Dynamic Stability Control DSC Driving stability limited during accel-
and Dynamic Traction Control DTC eration and cornering.
have failed. You can continue your journey, but
moderate your speed and exercise
due caution. Have the system
checked as soon as possible.
Indication in US models
The driving stability control systems, Reduced braking and driving stability.
including ABS and the Tire Pressure Drive cautiously and think well ahead.
Monitor, have failed, refer also to Avoid braking with full force, driving
page 56 on rough tracks, and depressing the
accelerator pedal to full throttle or
kick-down position. Have the system
checked immediately.
The driving stability control systems, Reduced braking and driving stability.
including ABS and the Flat Tire Moni- Drive cautiously and think well ahead.
tor or the Tire Pressure Monitor*, Avoid braking with full force, driving
have failed, refer also to page 56 on rough tracks, and depressing the
accelerator pedal to full throttle or
kick-down position. Have the system
checked immediately.
The driving stability control systems, Drive cautiously and think well ahead.
including ABS and the Flat Tire Moni- Avoid braking with full force, driving
tor or the Tire Pressure Monitor*, on rough tracks, and depressing the
have failed, refer also to page 56 accelerator pedal to full throttle or
kick-down position. Have the system
checked immediately.
134
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
1 2 Cause What to do
AT A GLANCE
> Tire damage Carefully bring the car to a stop.
Observe the information starting on
page 59.
> Flat Tire Monitor not initialized Initialize Flat Tire Monitor, page 59.
Light up in yellow:
CONTROLS
Flat Tire Monitor failed. Punctures are Have the system checked.
not indicated
There is a flat tire or substantial loss Carefully bring the car to a stop.
in tire pressure Observe the information starting on
DRIVING TIPS
page 61.
Light up in yellow:
Tire Pressure Monitor not initialized Initialize the Tire Pressure Monitor,
page 62.
Tire Pressure Monitor failed. Punc- Have the system checked. Observe
tures are not indicated the information starting on page 62.
REFERENCE
135
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Indicator and warning lamps
1 2 Cause What to do
Lights up in red:
> Transmission limp-home pro- You can continue your journey, but
gram active with restricted range moderate your speed and exercise
of gears, possibly with reduced due caution. Have the system
acceleration checked without delay.
> Gears can be engaged without Always depress the brake to engage a
depressing the brake gear.
> Automatic selector lever locked Overriding the selector lever lock,
page 41.
> Automatic selector lever locked: Overriding the selector lever lock,
Selector lever locked in position P page 41.
with engine running and brake
depressed or
> brake signal malfunctioning: gear To engage a gear while the vehicle is
can be engaged without depress- at a standstill, always depress the
ing the brake brake. Before leaving the vehicle,
move the selector lever to position P
and switch off the engine.
Lights up in red:
Lights up in yellow:
Transmission too hot Avoid high engine loads. You can con-
tinue your journey, but moderate
your speed and exercise due caution.
136
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
1 2 Cause What to do
Selector lever position P not engaged. Engage selector lever position P when
Ignition cannot be switched off you wish to switch off the ignition,
page 37.
AT A GLANCE
Lights up in red:
Electric steering wheel lock malfunc- The engine can no longer be started. If
tioning applicable, do not switch off the
engine. Contact your MINI Dealer.
Lights up in yellow:
Electric steering wheel lock engaged Move the steering wheel before start-
ing the engine.
CONTROLS
Cruise control system failed Have the system checked.
Bulb of exterior lighting system failed Have the exterior lighting checked as
DRIVING TIPS
soon as possible.
Rear fog lamp failed Have the rear fog lamp checked. MOBILITY
Engine oil pressure too low Stop immediately and switch off the
engine. You cannot continue your
journey. Contact your MINI Dealer.
137
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Indicator and warning lamps
1 2 Cause What to do
Lights up in red:
Lights up in yellow:
No service due
Time and date no longer correct Set the time and date, page 53.
138
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
AT A GLANCE
CONTROLS
DRIVING TIPS
MOBILITY
REFERENCE
139
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
AT A GLANCE
CONTROLS
DRIVING TIPS
MOBILITY
REFERENCE
REFERENCE
In the technical data, only the values that differ from the MINI Cooper S are shown for the
MINI John Cooper Works.
Engine data
Number of cylinders 4 4 4
Overboost briefly raises the maximum torque at high rates of acceleration, e.g. when passing.
142
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Dimensions
AT A GLANCE
CONTROLS
DRIVING TIPS
All dimensions given in inches/mm. Smallest turning circle diam.: 35 ft 10 in/10.7 m.
Figures following the semicolons: Values that differ for the MINI Cooper S. MOBILITY
REFERENCE
143
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Weights
Technical data
Cargo bay capacity cu ft/ 5.7 - 24.0/ 5.7 - 24.0/ 5.7 - 24.0/
Liters 160 - 680 160 - 680 160 - 680
Capacities
144
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
AT A GLANCE
CONTROLS
DRIVING TIPS
MOBILITY
REFERENCE
145
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
From A to Z
From A to Z
INDEX
A AKI, refer to Fuel Automatic recirculated-air
specifications 93 control AUC 75
Accessories, refer to Your Alarm system 24 Automatic transmission with
individual vehicle 4 All-season tires, refer to Winter Steptronic 39
Activated-charcoal filter for tires 102 interlock 40
automatic climate control 76 Ambient air, refer to overriding selector lever
Additives Recirculated-air lock 41
coolant 105 mode 73, 75 shiftlock 40
engine oil 105 Ambient lighting 71 sport program 40
Adjusting temperature inside Antenna, care 109 AUX-In, refer to External audio
the car, refer to Air Antifreeze device 79
conditioner 73 coolant 105 Average fuel consumption 48
Adjusting temperature inside washer fluid 44 setting the units 50
the car, refer to Automatic Antilock Brake System ABS 57 Average speed 49
climate control 74 Anti-theft alarm system, refer Axle loads, refer to
Air conditioner 72 to Alarm system 24 Weights 144
Air conditioning mode Anti-theft system 19
air conditioner 73 Approved axle loads, refer to B
automatic climate control 74 Weights 144
ventilation 76 Approved engine oils 105 Background lighting, refer to
Air distribution Approved gross vehicle Ambient lighting 71
automatic 75 weight, refer to Weights 144 Backrests, refer to Seats 29
individual 74 Armrest, refer to Center Backup lamps
manual 74 armrest 79 replacing bulb 116
Air flow rate 73, 75 Arrival time replacing bulbs in MINI 116
air conditioning system 73 computer 49 Band-aids, refer to First aid
automatic climate control 75 Ashtray 81 pouch 123
heating, ventilation 73 Assistant systems, refer to Bar, refer to Tow-starting,
Air outlets, refer to Air vents 72 Dynamic Stability Control towing away 126
Air pressure, checking, refer to DSC 57 Battery 122
Tire inflation pressure 94 AUC Automatic recirculated- charging 122
Air recirculation, refer to air control 75 disposal 27, 122
Recirculated-air Audio device, external 79 jump starting 123
mode 73, 75 AUTO program for automatic temporary power failure 122
Air supply climate control 75 Battery renewal
air conditioner 73 Automatic remote control 27
automatic climate control 74 air distribution 75 Being towed 125
ventilation 76 air flow rate 75 Belt tensioner, refer to Safety
Air vents 72 cruise control 45 belts 32
Airbags 64 headlamp control 67 Belts, refer to Safety belts 32
sitting safely 29 Automatic climate control 72 Beverage holders, refer to Cup
warning lamp 66 automatic air distribution 75 holders 81
Airing, refer to Ventilation 76
146
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Blower, refer to Air flow Car key, refer to Keys/remote Changing bulbs 113
rate 73, 75 controls 18 Changing wheels 119
Bonnet 103 Car phone Chassis number, refer to
Bottle holders, refer to Cup installation location, refer to Engine compartment 104
holders 81 Center armrest 79 Check Control 54
AT A GLANCE
Brake Assist 57 refer to separate Owner's Child's seats 35
Brake fluid, refer to Service Manual Child-restraint fixing system
requirements 52 Car wash 85 LATCH 36
Brake lamps Car wash, care 109 Child-restraint systems 35
replacing bulbs in MINI 116 Car washes 109 Chock, folding
Brake pads, breaking in 84 Care 109 space-saver spare tire 119
Brake rotors 85 Car washes 109 Chrome parts, care 110
brakes 84 Car-care products 109 Chrome parts, refer to
breaking in 84 CD/DVD drives 111 Care 109
Brake system 84 High-pressure washers 109 Cigarette lighter 81
CONTROLS
breaking in 84 internal 111 Cleaning headlamps 43
disc brakes 85 Leather 111 washer fluid 44
MINI Maintenance Manual washing 110 Clock 47
System 107 Upholstery and fabrics 111 12h/24h mode 50
Brakes Windows 110 setting time 53
ABS 57 Wiper blades 110 Closing
breaking in 84 Cargo area from inside 22
MINI Maintenance capacity 144 from outside 19
System 107 Cargo bay 86 Clothes hooks 80
DRIVING TIPS
parking brake 39 convenient access 26 Cockpit 10
service requirements 52 cover 86 Cold start, refer to Starting the
Brakes, refer to Braking lamp 70 engine 38
safely 85 opening from outside 23 Comfort access
Breakdown service, refer to Cargo bay, expanding 86 what to observe before
Roadside Assistance 123 Cargo bay lamp 70 entering a car wash 26
Break-in period 84 Cargo bay lid, refer to Comfort access, refer to
Breaking in the clutch 84 Tailgate 23 Convenient access 25
Bulb changing, refer to Lamps Cargo loading 87 Comfort area, refer to Around
and bulbs 113 securing cargo 88 the center console 14 MOBILITY
Button for starting the stowing cargo 87 Compartment for remote
engine 37 vehicle 86 control, refer to Ignition
Buttons on the steering Cargo, securing 88 lock 37
wheel 11 Carpets, care 111 Computer 48
Catalytic converter, refer to Condensation, refer to When
C Hot exhaust system 84 the vehicle is parked 85
Center armrest 79 Condition Based Service
California Proposition 65 Center brake lamp 117 CBS 107
warning 5 Center console, refer to Configuring settings, refer to
Can holders, refer to Cup Around the center Personal Profile 18
REFERENCE
147
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Consumption indicator Defect Driving lamps, refer to Parking
From A to Z
148
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Engine oil Filter Fuel display, refer to Fuel
adding 105 microfilter for air gauge 48
additives, refer to Approved conditioner 74 Fuel filler door 92
engine oils 105 microfilter/activated- releasing in the event of
approved engine oils 105 charcoal filter for automatic electrical malfunction 92
AT A GLANCE
capacity 105 climate control 76 Fuses 122
checking level 104 Fine wood, care 111
dipstick 104 First aid pouch 123 G
intervals between changes, Fixture for remote control,
refer to Service refer to Ignition lock 37 Garage door opener, refer to
requirements 52 Flash when locking/ Integrated universal remote
MINI Maintenance unlocking 20 control 77
System 107 Flat tire Gasoline
Engine oil level, checking 104 Run-Flat Tires 101 refer to Average
Engine output, refer to Engine Tire Pressure Monitor TPM 61 consumption 48
CONTROLS
data 142 Flat Tire Monitor FTM 59 Gasoline display, refer to Fuel
Engine starting, refer to indicating a flat tire 60 gauge 48
Starting the engine 38 initializing the system 59 Gasoline, refer to Required
Error messages, refer to Check malfunction 60 fuel 93
Control 54 snow chains 59 Gear indicator
ESP Electronic Stability system limits 59 automatic transmission with
Program, refer to Dynamic Flat tires, refer to Tire Steptronic 39
Stability Control DSC 57 condition 100 Gear shifting
Event data recorders 108 Floor mats, care 111 automatic transmission 40
DRIVING TIPS
Exhaust system, refer to Hot Fog lamps manual transmission 39
exhaust system 84 replacing bulb 115, 117 Gearshift lever
Exterior mirrors 33 Folding rear seat backrest 86 automatic transmission with
adjusting 33 Footbrake, refer to Braking Steptronic 40
automatic heating 33 safely 85 manual transmission 39
folding in and out 33 Footwell lamps 70 General driving notes 84
External audio device 79 For your own safety 4 Glass sunroof, electric 27
External care Front airbags 64 convenient operation 20, 22
109 Front fog lamps 70 opening, closing 27
Eyes indicator lamp 128 raising 27 MOBILITY
for tow-starting and towing replacing bulb 115 remote control 20
away 125 Front seat adjustment 29 Glove compartment 79
for tying down loads 88 Frost on windows, refer to Grills, refer to Air vents 72
Defrosting windows 74, 76 Gross vehicle weight, refer to
F FTM, refer to Flat Tire Weights 144
Monitor 59
Failure messages, refer to Fuel 93 H
Check Control 54 gauge 48
Failure of an electrical high-quality brands 93 Halogen lamps
consumer 122 quality 93 replacing bulb 114
REFERENCE
149
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Head restraints 31 Ignition key position 2, refer to K
From A to Z
150
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Locking Medical assistance, refer to Nets, refer to Storage
adjusting confirmation First aid pouch 123 compartments 80
signal 20 Microfilter New tires 101
from inside 22 for air conditioner 74 Number of cylinders, refer to
from outside 20 for automatic climate Engine data 142
AT A GLANCE
without remote control, refer control 76 Nylon rope, refer to Tow
to Convenient access 25 MINI Maintenance rope 126
Locking and unlocking doors System 107
confirmation signals 20 Microfilter/activated-charcoal O
from inside 22 filter
from outside 19 MINI Maintenance OBD socket, refer to Socket for
Low beams 67 System 107 Onboard Diagnosis 107
automatic 67 Microphone for telephone 14 Octane ratings, refer to Fuel
replacing bulb 114 MINI Internet page 4 specifications 93
Lower back support, refer to MINI Maintenance System 107 Odometer 47
CONTROLS
Lumbar support 30 Mirror dimming feature 33 Oil consumption 104
Luggage compartment lid, Mirrors 33 Oil level 104
refer to Tailgate 23 exterior mirrors 33 Oil, refer to Engine oil 104
Luggage compartment, refer heating 33 Old batteries, refer to
to Cargo bay 23 interior rearview mirror 33 Disposal 122
Luggage rack, refer to Roof- Mobile phone Onboard tool kit 113
mounted luggage rack 88 installation location, refer to Opening and closing
Lumbar support 30 Center armrest 79 convenient access 25
refer to separate Owner's from inside 22
DRIVING TIPS
M Manual from outside 19
Mobile phone, installation using the door lock 22
M+S tires, refer to Winter location, refer to Center via the remote control 19
tires 102 armrest 79 Opening and unlocking
Maintenance, refer to Service Mobile phone, refer to the from inside 22
Booklet separate Owner's Manual Outlets
Maintenance system 107 Mobility System 117 refer to Ventilation 76
Malfunction warnings, refer to Modifications, technical, refer Outlets, refer to Air vents 72
Check Control 54 to For your own safety 4 Output, refer to Engine
Manual air distribution 74 Monitoring system for tire data 142 MOBILITY
Manual mode pressures, refer to Flat Tire Outside temperature
automatic transmission with Monitor 59 display 47
Steptronic 40 Multifunction switch changing unit of measure 50
Manual operation refer to Turn signals/ on onboard computer 50
door lock 22 headlamp flasher 41 Outside-air mode
fuel filler door 92 refer to Wiper system 42 automatic climate control 75
transmission lock, automatic Multifunctional steering Overheated engine, refer to
transmission 41 wheel, refer to Buttons on Coolant temperature 47
Manual transmission 39 the steering wheel 11
Manual washing 110 P
REFERENCE
151
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Parking aid, refer to Park Rear fog lamp 70 Roadworthiness test, refer to
From A to Z
152
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Securing the vehicle Sliding/tilt sunroof Steering wheel 34
from inside 22 refer to Glass sunroof, adjustment 34
from outside 19 electric 27 buttons on steering wheel 11
Selector lever Slot for remote control 37 lock 37
automatic transmission with Smokers' package, refer to shift paddles 41
AT A GLANCE
Steptronic 40 Ashtray 81 Steptronic, refer to Automatic
Selector lever lock Snap-in adapter, refer to transmission with
automatic transmission with Center armrest storage Steptronic 39
Steptronic, refer to compartment 79 Storage area
Shiftlock 40 Snow chains 102 cargo bay 86
overriding manually 41 Socket for Onboard Diagnosis Storage compartment, front
Selector lever positions OBD 107 passenger side 80
automatic transmission with Socket, refer to Connecting Storage compartments 80
Steptronic 40 electrical appliances 81 Storage space
Service car, refer to Roadside Space-saver spare tire storage compartments 80
CONTROLS
Assistance 123 changing tires 119 Storing the vehicle 112
Service data in the remote inflation pressure 94 Storing tires 102
control 107 Spare wheel, refer to Space- Stowage, refer to Storage
Service Interval Display, refer saver spare tire 119 compartments 80
to Condition Based Service Special oils, refer to Approved Summer tires, refer to Wheels
CBS 107 engine oils 105 and tires 94
Service, refer to Roadside Speed 142 Switches, refer to Cockpit 10
Assistance 123 with winter tires 102 Switching off
Service requirement display, Speed control, refer to Cruise engine 38
DRIVING TIPS
refer to Condition Based control 45 Switching off the engine
Service CBS 107 Speedometer 12 start/stop button 37
Service requirements 52 Split rear seat backrest, refer to Switching the cooling function
Settings Expanding the cargo bay 86 on and off 76
clock, 12h/24h mode 50 Sport button 59 Symbols 4
Shifting gears Stability control, refer to
automatic transmission with Driving stability control T
Steptronic 40 systems 56
manual transmission 39 Start/stop button 37 Tachometer 47
Shiftlock starting the engine 38 Tail lamp, refer to Tail MOBILITY
automatic transmission, refer switching off the engine 38 lamps 116
to Changing selector lever Starting assistance, refer to replacing bulb 116
positions 40 Jump starting 123 Tail lamps 116
Side airbags 64 Starting, refer to Starting the replacing bulbs in MINI 116
Side turn signal indicator engine 38 Tailgate 23
replacing bulb 116 Starting the engine convenient access 26
Side windows, refer to start/stop button 37 opening from outside 23
Windows 28 Start-off assistance, refer to opening/closing 23
Signal horn, refer to Horn 10 DSC 57 unlocking with remote
Sitting safely 29 Hill Start Assist 58 control 21
REFERENCE
153
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Telephone Tires Transmission
From A to Z
154
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
V Window washer, refer to
Washer fluid 44
Valve Window washer reservoir,
dust cap 120 refer to Washer fluid
Vehicle volume, refer to
AT A GLANCE
battery 122 Capacities 144
breaking in 84 Windows 28
cargo loading 86 closing 28
dimensions 143 convenient operation 20
Identification Number, refer opening 28
to Engine compartment 104 pinch protection system 28
parking 38 Windshield
storage 112 cleaning 43
weight 144 defrosting and removing
Vehicle jack 119 condensation 74, 76
CONTROLS
jacking points 121 Windshield, defrosting, refer to
Ventilation Defrosting windows 74, 76
air conditioner 76 Windshield washer system 42
Vents, refer to Air vents 72 washer fluid 44
Vents, refer to Ventilation 76 washer nozzles 44
Volume of cargo area 144 Windshield wiper blades,
changing 113
W Windshield wipers, refer to
Wiper system 42
DRIVING TIPS
Warning and indicator Winter tires 102
lamps 13, 128 storage 102
Warning messages, refer to Wiper blade replacement 113
Check Control 54 Wiper system 42
Warning triangle 123 Work in the engine
Washer fluid 44 compartment 103
capacity of reservoir 44 Wrench/screwdriver, refer to
Washer fluid reservoir 44 Onboard tool kit 113
Waste tray, refer to Ashtray 81
Water on roads, refer to X MOBILITY
Driving through water 85
Waterfall lighting, refer to Xenon lamps
Ambient lighting 71 replacing bulb 114
Wear indicators in tires, refer to
Minimum tread depth 100
Weights 144
Welcome lamps 67
Wheel stud wrench
space-saver spare tire 119
Wheelbase, refer to
REFERENCE
Dimensions 143
Wheels and tires 94
Wheels, new 101
Width, refer to
Dimensions 143
155
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG
*BL2601123009*
DRIVE ME.
Online Edition for Part no. 01 41 2 601 123 - 08/08 BMW AG