You are on page 1of 2

FCT 8051 Development Board

1. FCT 8051 Development Board with following Modules


a. Power Supply +5V And +12V

b. Micro-Controller AT89S52 Interface: ISP Programming And Four 8-Bit Ports


Connection Facility

c. LED Interface: 3mm Green And Red LED

d. LCD Interface : 16x2-Line Or 20X4-Line LCD

e. Traffic Light Interface: 4-Way Traffic

f. DAC Interface: DAC0808 For Waveform Generation

g. Bluetooth Interface : HC-05 Connection Facility Only

h. Opto-Coupler Interface : Speed/ Event Counting

i. Stepper Motor Interface: L293D Motor Driver with Stepper Motor.

j. RTC Interface : DS1307 Based Real Time Clock

k. Thumbwheel Interface: 2-Thumbwheels

l. 7-Segment Display Interface: Multiplex 2-7 Seg. Display

m. Switch Interfacing: 4-Switches For RTC, Stepper Motor And Other Applications.

2. Connecting Wire
3. Power Adaptor
4. CD with Schematic and Embedded C Demo Codes
NOTE: 8051 USB ISP PROGRAMMER IS NOT INCLUDED WITH THIS BOARD
Extra accessory needed for 8051 Development Board: ISP programmer, Bluetooth HC-05 and
Software setup.

You might also like