You are on page 1of 1

procedure to create SOP and how to link to LTP.

Step 1 :
Create Product group using T.code MC81
Enter all the members in the product group , aggregate factor as 1 and proportio
n of your choice for example if you have 10 materials then you can enter in equa
l proportions ( Total % Should be 100 only or proportion based on your business)
Step 2:
Create planning for Product Group using T.Code MC81
The system by default proposes a version which you can accept or you can enter a
planning version of your choice )
then the plan will be saved under version number XXX.
Step 3 :
Break down Product Group Plan using T.code MC76
select Inactive version , select Disaggregate sales plan or Disaggregate Product
ion plan radio button
Step 4 :
Copy Planning version using T.code MC78
Enter :
Source version = Inactive version which the system proposes or you have created
for example 025
Target Version = Active version in to which the inactive version should be copie
d for example A00. and copy it.
Step 5 :
Transfer Planning Data to Demand Management using T.Code MC75
Select radio Button for Prod. plan for materials or PG membersas proportion of P
G
ENTER the requirements Type and version and check the Activate the active check
Box and click Transfer now then
The planning data is transferred to Demand Management .
Regards
kumar

You might also like