Professional Documents
Culture Documents
Objective
To be part of an enterprising organization to share as well as gain incisive knowledge in the field of
Technology and in turn adding value to the concerned organization as well as self in the process.
Experience
Educational Qualification
Currently pursuing final year M. Tech (IT) from Karnataka State Open University through
Virtual Education Trust.
H.S.C. from Kendriya Vidyalaya Sangathan KV No.2 Colaba, Mumbai, C.B.S.E. Board with
73% completed in March 2001.
S.S.C. from Kendriya Vidyalaya Sangathan KV Hamla, Malad, Mumbai, C.B.S.E. Board with
78% completed in March 1999.
Qualification (Specialization)
Full time Post Graduate Diploma in Embedded Systems at ECIT Center, Computer Division
from Electronics Corporation of India Ltd. Matunga, Mumbai with A+ certification completing
in August 2007.
Micro controllers 8051, Rabbit 2000 processor, ARM 7 architecture & programming with Atmel
(AT91 EB55) development tool Kit, TCP/IP: Development of Embedded TCP/IP/ARP protocol
stack, Socket Program in Linux, Windows Device Driver, Embedded & RTOS concepts, Linux
System Calls Programming, Project work on device driver PCI 1050 Data acquisition Card.
Work Experience
About ECIL: Electronics Corporation of India Limited, a wholly owned Government of India
Enterprise was established in 1967 to create a strong indigenous base in Electronics. The Company is
organized into Strategic Business Units specializing in Control and Automation, Strategic
Electronics, Special Components/Products for Defense, Software & Consultancy. Major Projects /
Products are Special Nuclear Instrumentation and Detectors, Electronic Voting Machines, Full Scope
Replica Simulators for Nuclear & Thermal Power Plants, etc.
Description : A low power hand-held battery operated Test Jig for Pulse
Generation and Measurement for/of Radiation Detectors.
My Contribution : Hardware: Design of the jig using Philips P89V51RD2+ 8-bit Flash
microcontroller. A 12-bit ADC interfaced via SPI (Serial Peripheral
Interface) bus to read the Battery strength.
4. Project Name : Design of HTTP 1.1 based Web Server and Device Driver
Development for PCI 1050 Data Acquisition Card on VxWorks.
Description : The operator selects the DAC Channel Number and issues a get
command to read the data. The data read is displayed to the operator
through a Web browser interface.
My Contribution : Device Driver development using Tornado IDE for PCI based Data
Acquisition Card. The target server on the host loads the project to the
target-agent running on the target VxWorks system.
Work Profile
1. Understanding and preparation of Functional Requirement Specifications.
3. Schematic designing in Protel Circuit Design software and preparation of Bill of Materials.
6. Testing and troubleshooting of PCB’s for any defects as per the Netlist.
8. Developing Technical Documents, Test Procedures, and Test reports for the microcontroller
boards.
10. Handling of the Mechanical Assembly and Wiring Details for the units.
11. Instructing and managing one Tradesman and one Draftsman for the entire project duration.
Firmware development for 8-bit 8051 based microcontroller using Keil uV3 C Compiler.
Firmware development for 32-bit ARM7 based Philips LPC2103 microcontroller using
Keil uV3 C Compiler.
Firmware development for 8-bit PIC 18F series based microcontroller using Microchip
MPLAB C18 Compiler.
Schematic designing using Protel 99SE schematic editor.
Problem analysis and finding solutions in stipulated time.
Preparation of Technical and Test Documents for microcontroller boards.
Keep updating myself technically on current trends and developments in embedded
systems.
Involved in Design and Development of Microcontroller based Web Server using hardware
TCP/IP protocol stack using IIM7010A network module.
Strengths
My duties involved are assisting in embedded system designing, circuit schematic designing and
firmware development for the system. I’m also involved in the electronics board testing,
troubleshooting and preparing electrical wiring diagrams for the overall system.
Personal Details
Declaration
I hereby declare that the above given information is true to best of my knowledge and belief.
Date: