Professional Documents
Culture Documents
New Features
1. A new reflash package has been added for 40-60HP SeaPro engines.
Module Support
Language Support
Changes
Resolved Issues
1. Licensing issues on computers with multiple user accounts have been resolved.
Known Issues
1. Starboard and Port DTS Command Modules may fail to reprogram on triple, quad or multi-
helm vessels.
Workaround:
To prevent programming failures, key on only the module you want to reprogram.
Once that module has been successfully reprogrammed, key that location off and
move on to the next.
If a module failed to program previously, turn all keys off and remove battery
power from the system.
Reapply battery power after 30 seconds and try again following the process above.
2. All diagnostic tests will report hardware error once any test has failed for any reason.
Workaround:
Key off the affected engine, place the lever in RWOT, and key up to reset
diagnostic tests.
3. Several long standing "Known Issues" have been relocated to our support Web Site.
Workaround:
These can be accessed at service.mercurymarine.com
4. Clicking Reload Engines after keying off a conflicted engine does not work on several of the
Diagnostic screens.
Workaround:
Exit and reopen the test with one of the engines keyed off.
Previous Releases
1.7.4 5/5/2016
Known Issues
1. Starboard and Port DTS Command Modules may fail to reprogram on triple, quad or multi-
helm vessels.
Workaround: To prevent programming failures, key on only the module you want to
reprogram.
Once that module has been successfully reprogrammed, key that location off and move on to
the next.
If a module failed to program previously, turn all keys off and remove battery power from the
system.
Reapply battery power after 30 seconds and try again following the process above.
2. All diagnostic tests will report hardware error once any test has failed for any reason.
Workaround: Key off the affected engine, place the lever in RWOT, and key up to reset
diagnostic tests.
3. Several long standing "Known Issues" have been relocated to our support Web Site.
Workaround: These can be accessed at service.mercurymarine.com
4. Clicking Reload Engines after keying off a conflicted engine does not work on several of the
Diagnostic screens.
Workaround: Exit and reopen the test with one of the engines keyed off.
1.7.3 4/26/2016
1. eBOM 'Sterndrive - Diesel DTS - SIM13p0_AB' now supports triples and quads.
2. New: A new reflash package has been added to update shift interrupt for SSR hubs on Gen 5
Verados.
3. Fixed: Fixed licensing issue when computer time zone changes.
4. Fixed: Added missing unit to FuelPress in Live Data and System Data.
5. Fixed: Removed 'Guardian - CCM' system from eBOMs that didn't support it.
6. Fixed: Clicking Cancel when Starter Output test is almost complete will no longer cause G3 to
crash.
7. Support for new GPS/IMU.
8. Support for new joystick.
9. Support for new steering wheel.
10. Fixed: Users in locales that use a comma as decimal separator will no longer be prevented
from setting Trim and Trailer limits on Gen 5 Verados.
11. Fixed: SCV2 modules that are unknown to G3 will no longer fail to be discovered after
rescanning.
Known Issues
1. Starboard and Port DTS Command Modules may fail to reprogram on triple, quad or multi-
helm vessels.
Workaround: To prevent programming failures, key on only the module you want to
reprogram.
Once that module has been successfully reprogrammed, key that location off and move on to
the next.
If a module failed to program previously, turn all keys off and remove battery power from the
system.
Reapply battery power after 30 seconds and try again following the process above.
2. All diagnostic tests will report hardware error once any test has failed for any reason.
Workaround: Key off the affected engine, place the lever in RWOT, and key up to reset
diagnostic tests.
3. Several long standing "Known Issues" have been relocated to our support Web Site.
Workaround: These can be accessed at service.mercurymarine.com
4. Clicking Reload Engines after keying off a conflicted engine does not work on several of the
Diagnostic screens.
Workaround: Exit and reopen the test with one of the engines keyed off.
1.7.2 3/03/2016
Known Issues
1. Starboard and Port DTS Command Modules may fail to reprogram on triple, quad or multi-
helm vessels.
Workaround: To prevent programming failures, key on only the module you want to
reprogram.
Once that module has been successfully reprogrammed, key that location off and move on to
the next.
If a module failed to program previously, turn all keys off and remove battery power from the
system.
Reapply battery power after 30 seconds and try again following the process above.
2. All diagnostic tests will report hardware error once any test has failed for any reason.
Workaround: Key off the affected engine, place the lever in RWOT, and key up to reset
diagnostic tests.
3. Several long standing "Known Issues" have been relocated to our support Web Site.
Workaround: These can be accessed at service.mercurymarine.com
4. Clicking Reload Engines after keying off a conflicted engine does not work on several of the
Diagnostic screens.
Workaround: Exit and reopen the test with one of the engines keyed off.