Professional Documents
Culture Documents
Module 4
Module 4
2. PICTURE OF AN SCR IS IT A
A) SCR
B) FET
C) PNP TRANSISTOR
1.what will be the output frequency of a three phase half have rectifier:-
a.double
b.same frequency
c.thrice.
6. An astable multivibrator is a?
Ans. Free running vibrator.
12. If in a servo system, the amplitude from the feedback system is below normal,
the servo will?
Ans. Oscillate.
13. A Desynn instrument has a positive irregular increasing error, you would adjust?
Ans. Lever length.
14. Torque synchro receiver bearing friction will cause?
Ans. Misalignment.
17. If velocity feedback in a servo system is above optimum, this will cause?
Ans. Sluggish operation.
19. For a NPN transmitter to conduct the collector circuit has to be?
Ans. More positive than the base.
22. In a PNP transmitter, which way does the conventional current flow?
Ans. Emitter to Collector.
30. What control system is used on an input that gives a controlled predetermined
output?
Ans. Closed loop.
31. Increasing velocity feedback from optimum will give?
Ans. A sluggish performance.
32. A rate control servo system with a steady input voltage will give?
Ans. Constant speed.
34. What are the majority carriers for forward biased PN junction devices?
Ans. Electrons and holes.
35. The resistance measured using an AVO between Collector and Emitter of a
transmitter is?
Ans. Same both ways.