1. The procedure for the issuance of a c. As in b & Handling, storage
production organization approval and packing for a production organization d. As in C & Personnel showing conformity of products, competence and parts and appliances with the qualification. applicable design data is given in: a. Sub part A b. Sub part B c. Sub part D d. Sub part G 6. The organization shall submit production organization exposition 2. __________shall be eligible as an to: applicant for an approval under this a. Type certificate holder Subpart G. b. Restricted Type certificate a. Any natural person holder b. legal person c. DGCA c. organization d. Manufacturer d. Any of the above 7. A statement signed by the 3. Each application for a production _____confirming that the production organization approval shall be organization exposition and any made to DGCA in associated manuals which define a. Form CA-1 the approved organizations b. Form CA-50 compliance with this Subpart will c. Form CA-30 be complied with at all times. d. Form and manner a. Accountable Manager acceptable to DGCA b. Production Manager c. Maintenance Manager 4. An organization shall be entitled to d. Any of the above have a production organization approval issued by 8. The duties and responsibilities of a. Type certificate holder the ______ as required by 21.145(c) b. Restricted Type certificate (2) including matters on which they holder may deal directly with DGCA on c. DGCA behalf of the organization. d. Manufacturer a. Accountable managers b. Managers 5. The quality system shall control c. Workers procedures for d. Any of the above a. Document issue, approval, or change 9. An __________showing associated b. As in a & Records completion chains of responsibility of the and retention managers as required by 21.145(c) (1) and (2). a. Organization procedure b. organizational chart c. organization graph d. none of the above 10.A _____ has been nominated by the d. Form and manner production organization, and is acceptable to DGCA accountable to the DGCA. His or her responsibility within the 14.________ finding is any non- organization shall consist of compliance with this Part which ensuring that all production is could lead to uncontrolled non- performed to the required compliances with applicable design standards and that the production data and which could affect the organization is continuously in safety of the aircraft. compliance with the data and a. Level one procedures identified in the b. Level two exposition referred to in 21.143. c. Level three a. Accountable manager d. None of the above b. Manager 15.___________ finding shall not c. Engineer require immediate action by the d. All of the above holder of the letter of agreement. a. Level one 11. After the issue of a production b. Level two organization approval, each change c. Level three to the approved production d. None of the above organization that is significant to the showing of conformity or to the 16.A production organization approval airworthiness and characteristics of shall be issued for noise, fuel venting and exhaust a. One year emissions of the product, part or b. Three years appliance, particularly changes to c. Five years the quality system, shall be d. Unlimited duration approved by______ a. Type certificate holder 17.Upon surrender or revocation, the b. Restricted Type certificate production organization certificate holder shall be returned to ________ c. DGCA a. Type certificate holder d. Manufacturer b. Restricted Type certificate holder 12.The terms of approval shall identify c. DGCA a. the scope of work, d. Manufacturer b. the products or the categories of parts and 18.Maintain a new aircraft that it has appliances, produced and issue a certificate of c. as in A & B for which the release to service (Form ____) in holder is entitled to respect of that maintenance. exercise the privileges a. Form CA-50 under 21.163 b. Form CA-52 c. Form CA-53 13.An application for a change to the d. Form and manner terms of approval shall be made in acceptable to DGCA a form a. Form CA-50 19.The holder of a________ shall ensure b. Form CA-52 that the production organization c. Form CA-33 exposition furnished in accordance with 21.143 and the documents, to d. None of the above which it refers, are used as basic working documents within the 20.______issues Form CA-1 organization. a. Accountable Manager a. Type certificate b. Managers b. Letter of agreement with c. Certifying staf DGCA d. Any one of the above c. Production Organization approval