Professional Documents
Culture Documents
Datashet Automotriz PDF
Datashet Automotriz PDF
CAUTION / WARNING
The information in this publication has been carefully checked and is believed to be
accurate; however, no responsibility is assumed for inaccuracies.
Sanken reserves the right to make changes without further notice to any products herein
in the interest of improvements in the performance, reliability, or manufacturability of its
products. Before placing an order, Sanken advises its customers to obtain the latest
version of the relevant information to verify that the information being relied upon is
current.
Application and operation examples described in this catalog are quoted for the sole
purpose of reference for the use of the products herein and Sanken can assume no
responsibility for any infringement of industrial property rights, intellectual property rights
or any other rights of Sanken or any third party which may result from its use.
When using the products herein, the applicability and suitability of such products for the
intended purpose or object shall be reviewed at the users responsibility.
Although Sanken undertakes to enhance the quality and reliability of its products, the
occurrence of failure and defect of semiconductor products at a certain rate is inevitable.
Users of Sanken products are requested to take, at their own risk, preventative measures
including safety design of the equipment or systems against any possible injury, death,
fires or damages to the society due to device failure or malfunction.
Sanken products listed in this catalog are designed and intended for the use as
components in general purpose electronic equipment or apparatus (home appliances,
office equipment, telecommunication equipment, measuring equipment, etc.).
Before placing an order, the users written consent to the specifications is requested.
The use of Sanken products without the written consent of Sanken in the applications
where extremely high reliability is required (aerospace equipment, nuclear power control
systems, life support systems, etc.) is strictly prohibited.
Anti radioactive ray design is not considered for the products listed herein.
This publication shall not be reproduced in whole or in part without prior written approval
from Sanken.
Gallium arsenide is used in some of the products listed in this publication. These
products are dangerous if they are burned or smashed in the process of disposal. It is
also dangerous to drink the liquid or inhale the gas generated by such products when
chemically disposed.
Contents
Examples of Use of Typical Products by Application .............. 2
1 ICs
1-1. Regulator ICs
Application Note ................................................................................ 7
2 Discretes
2-1. Transistors
2-1-1. Transistors ............................................................................ 80
2-3. Thyristors
2-3-1. Reverse Conducting Thyristors .............................. 125
2-4. Diodes
2-4-1. Alternator Diodes ........................................................... 127
3 LEDs
3-1. Uni-Color LED Lamps ................................................................ 134
1
Examples of Use of Typical Products by Application
Throttle System
DC Motor Driver ICs (p.60 and after)
Control IC and full bridge power stage in a single package.
Surface-mounting type series are also available.
SI-5300 / SPF7301
Motor Driver Transistor Arrays (p.99)
H-bridge of NPN x 2 and PNP x 2 in a single package.
With integrated back emf. clamp diode.
Alternators SLA8004
Fuel Injectors
Injector transistors (p.84 and after)
Transistors and MOS FETs are available in discretes and arrays in
various packages.
2SB1622 / 2SC4153 / 2SD2382 / MN611S / STA461C /
STA463C / STA508A / SDC09 / SDK09 / SPF0001 / SSD103
Headlamps
HID lamp driver ICs (p.64 and after)
High-voltage controller IC and 4-circuit power stage in a
single package.
Direct drive from CPU.
SLA2402M / SLA2403M / SMA2409M
Thyristors for HID lamp ignition (p.125 and after)
Best suited to C-discharge SW element on high-voltage
primary side of an igniter.
Integrates a reverse direction diode. Ignition System
High di/dt resistance
TFC561D / TFC562D High-voltage diodes for ignition (p.128)
MOS FET arrays for driving HID lamps (p.122)
4 circuits of N-ch MOS FETs of 450V/7A in a single package.
Withstand voltage range: 0.5 to 15kV
SHV-01JN / SHV-05J / SHV-06JN
SMA5113 2SD2141 / MN638S
Ignition transistors (p.89 and after)
2-ph stepper-motor driver ICs for AFS (p.58 and after)
Low output saturation voltage, integrated recovery diode,
surface-mount.
Ignition ICs
Custom-made (contact our sales reps.)
SPF7211
2
Room Lamp
Multi-chip LED modules (p.142)
Power Steering
Various LEDs (p.133)
Motor driver MOS FETs (p.108 and after)
Various packages integrating low ON resistors,
bidirectional Zener diodes, etc.
2SK3710 / 2SK3711 / 2SK3724 / 2SK3800 /
2SK3801 / 2SK3803 / 2SK3851
Tail Lamps
Power LED
Custom-made
(contact our sales reps.)
O2 sensor heater
Heater driver MOS FETs (p.115)
Low ON resistor and integral gate protection
diode.
FKV460S
3
4
1 ICs
1-1. Regulator ICs 1-3. Motor Driver ICs
.............................................. .........................
Application Note 7 Stepper-motor Driver ICs 56
.................... ...................................
Dropper Type Regulator ICs 8 SLA4708M (50V, 1.5A) 56
SI-3001S (5V/1A, With Output ON/OFF Control) ... 8 SPF7211 (40V, 0.8A) ..................................... 58
5
6
Application Note for Regulator ICs
0.5
Voltage accuracy of 2%
Low dropout voltage 1V at IO 1.0A, 0.5V at IO 0.4A
4.00.2
7.90.2
Built-in overcurrent, overvoltage and thermal protection circuits
Withstands external electromagnetic noises
16.90.3
TO220 equivalent full-mold package
(17.9)
a
2.6 0.1
b
(2.0)
Absolute Maximum Ratings
5.0 0.6
(Ta = 25C) 0.950.15
+0.2
Parameter Symbol Ratings Unit Conditions 0.85 0.1
(4.6)
(8.0)
DC Input Voltage VIN 35 V +0.2
0.1
0.45
Output Control Terminal Voltage VC VIN V
P1.70.7 4=6.80.7 3.9 0.7 (4.3)
Output Current IO 1.0 *
1
A 8.2 0.7
Notes:
*1. Since PD (max) = ( VIN VO) IO = 18( W ), VIN (max) and IO (max) may be limited depending on operating conditions. Refer to the Co : Output capacitor (47 to 100F, 50V)
Ta -PD curve to compute the corresponding values. C1, C2 : Input capacitors (C1: approx. 47F, C2: approx. 0.33F).
*2. Refer to the dropout voltage. These are required for inductive input lines or long wiring.
*3. IS1 rating shall be the point at which the output voltage VO (VIN = 14V, Io = 0.4A) drops to 5%. Tantalum capacitors are recommended for C1 and Co,
*4. The output control terminal Vc is pulled up inside the IC. Each input level can be directly driven with LS-TTL ICs. Thus, especially at low temperatures.
LS-TTL direct driving is also possible. D1 : Protection diode. Required as protection against reverse
biasing between input and output.
(Recommended diode: Sanken EU2Z.)
8
Dropper Type Regulator ICs [With Output ON/OFF Control] SI-3001S
Electrical Characteristics
IO = V IN =
0.4
Dropout voltage VDIF (V)
0 (A) 30 ( V)
0.2
0.1
4.9 4.9
0 0 0
0 0.5 1.0 0 5 10 15 20 25 30 0 0.5 1.0
Output current IO (A) Input voltage VIN (V) Output current IO (A)
VIN =
Output voltage VO (V)
5
30(V) 10
16(V) 12(V)
4
5.0
3
14(V)
VIN IOUT condition 12 () 5
5.5(V) 5.5 (V) / 1.0 (A) 2
12 (V) / 0.4 (A)
14 (V) / 0.4 (A)
16 (V) / 0.4 (A) 5 ()
30 (V) / 0 (A) 1
4.9
0 0 0
--50 0 50 100 150 0 2 4 6 8 10 0 2 4 6 8 10
Ambient temperature Ta (C) Input voltage VIN (V) Input voltage VIN (V)
4 4 30 (V) 4
3 3 3
5.5 (V)
2 2 20 (V) 2
14 (V)
1 1 1
ON OFF
0 0 0
0 1 2 3 4 5 0 0.5 1.0 1.5 2.0 2.5 3.0 0 125 130 135 140 145 150 155
Output ON/OFF control voltage VC (V) Output current IO (A) Ambient temperature Ta (C)
15
Output voltage VO (V)
4 2002002mm (2.3C/W)
3 10 1001002mm (5.2C/W)
75752mm (7.6C/W)
2
5
1
Without heatsink
0 0
10 20 30 40 50 --30 20 0 20 40 60 80 100
9
Dropper Type Regulator ICs [3-terminal] SI-3003S
40.2
Built-in dropping type overcurrent, overvoltage and thermal protection circuits
0.5
7.9 0.2
TO220 equivalent full-mold package
16.9 0.3
a
2 max
Absolute Maximum Ratings b 2.6 0.15
(Ta =25C)
Parameter Symbol Ratings Unit Conditions
(13.5)
+0.2
2 0.85 0.1
Output current IO 0.8 * A
DRIVE
Dropout voltage VDIF
1.0 V IO 0.8A TSD DET
ERR
Line regulation VO LINE 30 mV VIN =8 to 16V
Notes:
*1. Since P D (max) = (VIN VO) IO =22 (W), VIN (max) and IO (max) may be limited depending on operating conditions. Refer to the
Ta P D curve to compute the corresponding values.
*2. Refer to the dropout voltage.
*3. IS1 rating shall be the point at which the output voltage VO (VIN=14V, I O=0.5A) drops to 5%. Standard Circuit Diagram
D1 *2
1 5
SI-3003S
2 4
DC input + *1 N.C 3 N.C + DC output
C2 CO
VIN C1 VO
10
Dropper Type Regulator ICs [3-terminal] SI-3003S
Electrical Characteristics
0.4
Dropout voltage VDIF (V)
0 0 0
0 0.2 0.4 0.6 0.8 0 5 10 15 20 25 30 35 0 0.2 0.4 0.6 0.8
Output current IO (A) Input voltage VIN (V) Output current IO (A)
VIN / IO:
4
30V / 0A
14V / 0.5A 150
6V / 0.8A
5.0 3
IO=0.8A
100 =0.5A
2 =0.2A
=0A
50
1
4.9 0 0
50 0 50 100 150 0 2 4 6 8 10 0 5 10 15 20 25 30 35
Ambient temperature Ta (C) Input voltage VIN (V) Input voltage VIN (V)
4 4 (2.3C/W)
15
100 100 2mm
3 3 (5.2C/W)
10
2 VIN =6V 2 75 75 2mm
14V (7.6C/W)
5
1 35V 1
Without heatsink
25V
0 0 0
0 0.5 1.0 1.5 2.0 2.5 120 140 160 180 200 40 0 40 80 100
11
Dropper Type Regulator ICs [2-output] SI-3101S
Main output can be externally turned ON/OFF (with ignition switch, etc.) 10.0 0.2 2.8 0.2
0.5
<most suitable as memory backup power supply>
4.0 0.2
Low standby current ( 0.8mA)
7.9 0.2
Low dropout voltage 1V
Built-in dropping type overcurrent, overvoltage and thermal protection circuits
16.9 0.3
TO220 equivalent 5-terminal full-mold package a
(17.9)
2.6 0.1
b
(2.0)
5.0 0.6
0.95 0.15
Absolute Maximum Ratings (Ta=25C) +0.2
0.85 0.1
(4.6)
Parameter Symbol Ratings Unit Conditions
(8.0)
+0.2
0.1
0.45
DC input voltage VIN 40 V
P1.7 0.7 4 = 6.80.7 3.9 (4.3)
Battery reverse connection VINB 13 * 6 V One minute
8.2 0.7
Junction to case thermal resistance j-c 5.5 C/W Equivalent Circuit Diagram
Junction to ambient-air thermal
j-a 66.7 C/W Stand-alone without heatsink VO1
resistance VIN
1 4
OCP
DRIVE
TSD DET
ERR
DET
CH1 VO1 4.80 5.00 5.20 V IO =0.05A ERR
Output voltage
CH2 VO2 4.80 5.00 5.20 V IO =0.3A 2 3
VC CONT GND
Channel-channel voltage difference IO1 =0 to 0.05A
VO 0.1 0.1 V
(VO1 VO2) IO2 =0 to 0.3A
Output ON VCH 4.2 4.5 4.8 V CO1 : Output capacitor (47 to 100F, 50V)
Output control voltage
Output OFF VCL 3.2 3.5 3.8 V CO2 : Output capacitor (47 to 100F, 50V)
*1 CIN : Input capacitors (approx. 47F).
Output ON I CH 100 A VC =4.8V
Output control current Tantalum capacitors are recommended for CO1, CO2
Output OFF I CL 100 A VC =3.2V and CIN, especially at low temperatures.
*2 D1, D2, D3 : Protection diode.
Overvoltage protection starting
VOVP 35 * 4 V Required as protection against reverse biasing
voltage
between input and output.
Thermal protection starting (Recommended diode: Sanken EU2Z.)
TTSD 130 * 5 C
temperature
Notes:
*1. Since P D (max) = (VIN VO) IO1 + (VIN VO2) IO2 = 18 (W), VIN (max), IO1 (max) and IO2 (max) may be limited depending on
operating conditions. Refer to the TaPD curve to compute the corresponding values.
*2. Refer to the dropout voltage.
*3. IS1 rating shall be the point at which the output voltage VO1 or VO2 (VIN = 14V, IO1 = 0.05A or IO2 = 0.3A) drops to 5%.
*4. Overvoltage protection circuit is built only in CH2 (VO2 side).
*5. The indicated temperatures are junction temperatures.
*6. All terminals, except VIN and GND, are open.
12
Dropper Type Regulator ICs [2-output] SI-3101S
Electrical Characteristics
2
71.4
1
4.9
0 0 0
0 0.1 0.2 0.3 0.4 0.5 0.6 0 2 4 6 8 10 0 5 10 15 20
Output current IO (A) Input voltage VIN (V) Input voltage VIN (V)
ON/OFF Control Characteristics Overcurrent Protection Characteristics (1) Overcurrent Protection Characteristics (2)
6 6 6
5 5 5
V IN = 4.5V
Output voltage VO2 (V)
6V
4 4 14V 4
V IN = 22V VIN =
14V, 22V 6V IO2 = 0 (A) 6V
3 I O1 = 0 (A)
3 VC = 5 (V) 3 14V
4.5V VC = 5 (V)
22V
2 2 2
OFF ON
1 1 1
0 0 0
0 1 2 3 4 5 6 0 0.05 0.1 0.15 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8
Output ON/OFF control voltage VC (V) Output current IO (A) Output current IO (A)
15
Output voltage VO1 (V)
VO1
4 4 200 200 2mm (2.3C/W)
2 2
5
1 1
Without heatsink
0 0 0
0 130 140 150 160 10 20 30 40 --30 --20 0 20 40 60 80 100 115
Ambient temperature Ta (C) Input voltage VIN (V) Operating temperature Ta (C)
Note on Thermal Protection Characteristics:
The thermal protection circuit is intended for protection against heat
during instantaneous short-circuiting. Its operation, including reliability,
is not guaranteed for short-circuiting over an extended period of time.
13
Dropper Type Regulator ICs [2-output] SI-3102S
0.5
<most suitable as memory backup power supply>
Low standby current ( 0.8mA)
4.0 0.2
7.9 0.2
Low dropout voltage 1V
Built-in dropping type overcurrent, overvoltage and thermal protection circuits
16.9 0.3
TO220 equivalent 5-terminal full-mold miniature package
(17.9)
a
2.6 0.1
b
(2.0)
5.0 0.6
Absolute Maximum Ratings (Ta=25C) 0.95 0.15
+0.2
Parameter Symbol Ratings Unit Conditions 0.85 0.1
(4.6)
(8.0)
DC input voltage VIN 35 V +0.2
0.1
0.45
Battery reverse connection VINB 13 * 6 V One minute
P1.7 0.7 4 = 6.8 0.7 3.9 0.7 (4.3)
Output control terminal voltage VC VIN V 8.2 0.7
VIN VO1
1 4
OCP
DRIVE
Electrical Characteristics (Tj = 25C, VIN = 14V unless otherwise specified)
TSD DET
ERR
Ratings
Parameter Symbol Unit Conditions
min typ max REF
5
Input voltage VIN 6 *2 30 * 1 V VO2
CH1 VO1 4.80 5.00 5.20 V IO = 0.04A OCP
Output voltage OVP
DRIVE
14
Dropper Type Regulator ICs [2-output] SI-3102S
Electrical Characteristics
VIN =
6V,14V 4 8
5.00 IO1 = 0A
3 20mA 6
40mA
4.95
30V 2 4
4.90
1 2
4.85 0 0
0 20 40 60 80 100 0 1 2 3 4 5 6 7 0 5 10 15 20 25 30 35
Output current IO (mA) Input voltage VIN (V) Input voltage VIN (V)
ON/OFF Control Characteristics Overcurrent Protection Characteristics (1) Overcurrent Protection Characteristics (2)
6 6 6
VIN = 14V VIN = VC VIN = VC
IO2 = 5mA IO2 = 5mA IO1 = 5mA
5 5 5
Output voltage VO2 (V)
4 4 4
1 1 1
0 0 0
0 1 2 3 4 5 6 0 20 40 60 80 100 120 0 0.1 0.2 0.3 0.4 0.5
Output ON/OFF control voltage VC (V) Output current IO (mA) Output current IO2 (A)
4 4 (2.3C/W)
15
100 100 2mm
3 3 (5.2C/W)
VO2 10
2 2 75 75 2mm
(7.6C/W)
5
1 1
Without heatsink
0 0 0
100 120 140 180 200 220 240 26 28 30 32 34 36 38 40 20 0 20 40 60 80 100 120 140 160
Ambient temperature Ta (C) Input voltage VIN (V) Operating temperature Ta (C)
Note on Thermal Protection Characteristics:
The thermal protection circuit is intended for protection against heat
during instantaneous short-circuiting. Its operation, including reliability,
is not guaranteed for short-circuiting over an extended period of time. 15
Dropper Type System Regulator ICs SI-3322S
0.25
0.75
45
Adhesive surface
10.10
10.50
0.23
2.35 0.32
2.65
VS VSC voltage difference VS 0.3 V VCC = 5.2V, ISC = 50mA R1, R2: NMI judge voltage (5V typ) variable resistor RSTTC: Normally open.
NMI judge voltage (R1 + R2) 2.5V/R2 GND connected when TRE
BAI input current I BAI 0.6 mA BAI = 4.9 to 16V, ISC = 0.2mA R1, R2 2k is to be halved.
Normally, VNMIC terminal is open.
NMIC input current I NMIC 0.04 0.1 0.4 mA VCC = BAI = 14V
Circuit Block Diagram
W/D input current I W/D 0.04 0.1 0.4 mA VCC = BAI = 14V
+ +
RSTTC input current I RTC 0.04 0.1 0.4 mA VCC = BAI = 14V +
VNMIC VCC VB VS VSC
Lo VNIL 4.9 5 5.1 V NMIC = 0V 6 5 4 3 2
NMI judge voltage Start
Hysteresis VN 0.12 0.3 V circuit +
Current
Main limit circuit
Hi VNOH VS0.5 V Isource = 1mA regulator
NMI output voltage BAI 1
Lo VNOL 0.6 V Isink = 0.5mA 9 NMI
+ +
VSOH VS0.5 V Isource = 1mA NMI judge
Hi circuit
STBY output voltage
Backup regulator Reference STBY
Lo VSOL 0.6 V Isink = 0.5mA oscillation Counter control 15 STBY
circuit circuit
Hi VROH VS0.5 V Isource = 1mA
RESET output voltage Frequency
OUTE comparator RESET
Lo VROL 0.6 V Isink = 0.5mA GND 8 control control 12 RESET
circuit circuit
Hi VUOH VS0.5 V Isource = 1mA
OUTE output voltage
Lo VUOL 0.6 V Isink = 0.5mA 13 11 10 16 14
NMIC OUTE OUTE W/D RSTTC
Hi VTOH VS0.5 V Isource = 1mA
OUTE output voltage
Lo VTOL 0.6 V Isink = 0.5mA
Notes: The direction of current flowing into the IC is positive (+). OUTE
W/D HI or Lo
Power on W/D input stop W/D input start Power off
(microcomputer (microcomputer
runaway) resets)
16
Dropper Type System Regulator ICs SI-3322S
Electrical Characteristics
5.02 5.02 5
IO = 0A
5.01 IO = 0A 5.01 4
VS (V)
VS (V)
VS (V)
5 5 3
0.4A
4.99 0.4A 4.99 2
4.97 4.97 0
0 5 10 15 20 25 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 0 2 4 6 8 10
VCC (V) IO (A) VCC (V)
No load
5
4
15
4
3
ICC (mA)
I B (mA)
VS (V)
3 10
VCC = 7V
2
2
12V
5
1
1
0 0 0
0 0.5 1 1.5 2 0 5 10 15 20 0 5 10 15 20
IO (A) VCC (V) VCC (V)
No load
5
4
15
4
3
IS (mA)
VSC (V)
VSC (V)
10 3
2
2
5
1
1
0 0 0
0 5 10 15 20 0 5 10 15 20 0 2 4 6 8 10
VCC (V) BAI (V) ISC (A)
BAI Input Current VS-VSC Voltage Difference NMI Judge Voltage Characteristics
500 500 6
No load
5
400 400
4
VS (mV)
300 300
IBAI (A)
NMI (V)
3
200 200
2
100 100
1
0 0 0
0 5 10 15 20 0 20 40 60 80 100 120 4.5 4.7 4.9 5.1 5.3 5.5
BAI (V) ISC (mA) VCC (V)
17
Dropper Type System Regulator ICs [Surface-mount 2-output] SPF3004
7.50.2
Absolute Maximum Ratings (Ta=25C)
+0.2
2.0 0.8
Parameter Symbol Ratings Unit Remarks
1 8
13 to 35 Reverse connection 1 min max.
DC input voltage VIN V +0.15
40 400mS 1.270.25 0.4 0.05
2.50.2
0.3 to 35 +0.15
Output control terminal voltage EN V 0.25 0.05
40 400mS
CH1 Io1 0.4
Output current A
CH2 Io2 0.2
MODE terminal input voltage MODE
W/D/C terminal input voltage W/D/C
TC terminal input voltage TC
0.3 to 7 V
CK terminal input voltage CK
Vo1-fail terminal output voltage Vo1-fail
Reset terminal output voltage RESET Standard Connection Diagram
Junction temperature Tj 40 to 150 C
Storage temperature Tstg 40 to 150 C D1
Vin Vo1
Thermal resistance 4.1 C/W With infinite heatsink
j-c
(junction to case) EN
With glass epoxy + copper foil board (size 5.0 x 7.4cm; Vo1
Thermal resistance j-a 38 C/W SPF3004
(junction to ambient air) t: glass epoxy = 1.6mm/copper foil = 18m) Cin Vo1 fail
+ MODE + Co1
Vo2
Battery Load
GND RESET
Electrical Characteristics W/D/C CK TC
D2
Ratings
Parameter Symbol min typ max Unit Conditions
Input voltage VIN Vo1+VDIF1 * 3 35 * 4 V
VIN = Vo1+VDIF1 to 18V,
CH1 Vo1 4.90 5.00 5.10 Io1 = 0 to 0.4A, Tj = 40 to 125C
Output voltage VIN = Vo1+VDIF1 to 18V,
CH1 Vo1 4.85 5.00 5.15 V Io1 = 0 to 0.4A, Tj = 40 to 150C Rtc
+
VIN = Vo2+VDIF1+VDIF2 to 18V,
CH2 Vo2 3.15 3.30 3.45 Io1 = 0 to 0.2A Load + Co2
CH1 VDIF11 0.5 Io1 = 0.4A Ctc
Vo1-fail terminal HI voltage Vfail H Vo10.8V * 5 V Isource = 15A Vo1thH Vo1thL Reset
Vo1 operation
Reset terminal LOW voltage VRSL 0.5 V Isink = 250A, (Pull-up resistance 20k typ)
Reset terminal HI voltage VRSH Vo10.8V * 5 V Isource = 15A Vo1 fail
(Vo1 pull-up) OCP
Vo1thH Vo1 0.97 V Vrs, Vfail 4.5V operation
Reset
CH1 operation
Vo1thL 4.05 V Vrs, Vfail 0.8V Vo2thH Vo2thL
Reset detect voltage Vo2
Vo2thH Vo2 0.985 V Vrs 3.0V
CH2 MODE
Vo2thL 3.00 V Vrs 0.8V (Vo1 system connection) Vmodeth
Vo1 pull-up status
Vo1th Vo1th = Vo1thH-Vo1thL
Open status
Reset detect voltage CH1 0.255 V TC
hysteresis width Vo2th Vo2th = Vo2thH-Vo2thL
(3.3 pull-up)
CH2 0.105 V
Power on reset delay time tdly 0.70 Rtc Ctc 0.72 Rtc Ctc 0.74 Rtc Ctc S Min. set time: 6mS RESET
tdly tdly
W/D time twd 0.52 Rtc Ctc 0.54 Rtc Ctc 0.56 Rtc Ctc S Min. set time: 4mS twd tdly-twdp
W/D/C twdp
W/D pulse time twdp 0.04 Rtc Ctc 0.06 Rtc Ctc 0.08 Rtc Ctc S Min. set time: 400S (Vo1 system connection) W/D
Open status Stop period
MODE terminal control voltage Vmodeth 1.0 3.0 V CK
MODE terminal ON ImodeH 200 MODE = 5V
control current A
OFF ImodeL 1.0 1.0 MODE = 0V, Tj = 40 to 125C
W/D/C terminal control voltage Vw/d/cth 1.0 3.0 V *7
W/D/C terminal ON Iw/d/cH 200 W/D/C = 5V
A
control current OFF Iw/d/cL 1.0 1.0 W/D/C = 0V, Tj = 40 to 125C
CK terminal control voltage Vckth 1.0 3.0 V Min. clock pulse time = 5S (Duty 50%)
CK terminal control ON IckH 200 CK = 5V
A
current OFF IckL 1.0 1.0 CK = 0V, Tj = 40 to 125C
Notes:
*3: Refer to dropout voltage.
*4: Since PD (max) = {(VINVO1) (IO1+ IO2)} + (VIN Iq) + {(VO1VO2) IO2 } = 30W, VIN (max), IO1(max) and I O2(max) may be limited
depending on operating conditions.
*5: The Vo1-fail and RESET terminals are pulled up in the IC; may be directly connected to logic circuits.
*6: The thermal protection function is built in VO1 (CH1 side) only. The design thermal protection starting temperature is 155
C (min.) and 165C (typ). These values represent the design warranty.
*7: The threshold voltage at the W/D/C terminals is determined by the presence/absence of WD operation (occurrence of
RESET signal pulses). The W/D/C function is assumed to be OFF during the period when RESET pulses occur.
18 *8: The TOFF-EN operation (VEN: 5V 0V) for Tj=150C is 16mS (0.32V/mS) max.
Dropper Type System Regulator ICs [Surface-mount 2-output] SPF3004
Electrical Characteristics
Rise Characteristics of Output Voltage Line Regulation (V01) Line Regulation (V02)
6
5.10 3.50
Output voltage VO1, VO2 (V)
IO1=0A
5.00 3.40
IO2=0A
0.2A IO1=0A
2 0.2A IO2 =0A
0.4A 0.1A
0.2A
4.90 3.30
0
0 2 4 6 8 10 0 10 20 30 40 0 10 20 30 40
Input voltage V IN (V) Input voltage VIN (V) Input voltage VIN (V)
5.10 3.50
Vdif1 (V)
Output voltage VO1 (V)
Dropout voltage
5.00 3.40 0.5
VIN =6V
10V VIN =6V
14V 10V
18V 14V
18V
4.90 3.30
0 0 0
0 0.1 0.2 0.3 0.4 0 0.05 0.10 0.15 0.20 0 0.2 0.4 0.6
Output current IO1 (A) Output current IO2 (A) Output current IO1 (A)
GND Current Overcurrent Protection Characteristics (V01) Overcurrent Protection Characteristics (V02)
6
40 4
GND current IGND (mA)
4
VIN =6V
IO1=0.4A 10V
VIN =6V
10V 14V
14V 18V
20 18V 2
IO1=0.2A 2
IO1=0A
0 0 0
10 20 30 40 0 0.5 1.0 0 0.2 0.4 0.6
Input voltage VIN (V) Output current IO1 (A) Output current IO2 (A)
IO1=5mA
40
Power dissipation PD (W)
4 4 (Tc=25C)
30
20
2 2
10
Copper foil area
(5.07.4mm, t=1m)
0 0
100 120 140 160 180 200 1 2 3 4 -40 0 25 50 85 125 150
Ambient temperature Ta (C) EN terminal voltage VEN (V) Operating temperature Ta (C)
19
Dropper Type System Regulator ICs [Surface-mount 2-output] SPF3006
7.50.2
Absolute Maximum Ratings (Ta=25C)
2.0 0.8
+0.2
Parameter Symbol Ratings Unit Remarks
1 8
VIN1
DC input voltage 13 to 35 V Reverse connection 1 min max. +0.15
VIN2 1.270.25 0.4 0.05
2.50.2
Vo1, Vo2 output control terminal voltage EN 0.3 to 35 V +0.15
0.250.05
Vo2 output control terminal voltage VC 0.3 to 35 V
CH1 Io1 0.4
Output current A
CH2 Io2 0.2
TC terminal input voltage TC
CK terminal input voltage CK
0.3 to 7 V
W/D/C terminal input voltage W/D/C
Reset terminal output voltage RESET Standard Connection Diagram
P D1 18.6 With an infinite heatsink mounted.
Power dissipation W D1
P D2 2.97 *1 Vin1 Vo1
3Pin
Junction temperature Tj 40 to 150 C EN
4Pin
2Pin 14Pin RESET Rtc
Operating temperature Top 40 to 105 C Vin2
6Pin SFP3006 7Pin
Storage temperature Tstg 40 to 150 C Vc
5Pin Vo2 Co1
Cin 1,9, 8Pin
Thermal resistance 12,13Pin 10Pin 11Pin Load
(junction to case) j-c 6.7 C/W With an infinite heatsink mounted. Battery
GND
Tc
CK W/D/C Ctc
Thermal resistance 42 C/W *1
(junction to ambient air) j-a
D2
Notes: *1: With glass epoxy + copper foil board (size 5.0 7.4cm; t: glass epoxy = 1.6mm / copper foil = 18m)
* The regulator IC may be used only
with Vo1 (single output power
supply) by selecting NC (open) for Load Co2
5Pin:Vc, 6Pin:Vin2 and 7Pin: Vo2.
Electrical Characteristics
Ratings
Parameter Symbol Unit Conditions
min typ max Cin: Capacitor (39F) for oscillation prevention
* 2, 3 CO1: Output capacitor (39F)
Input voltage VIN1, 2 Vo1+VDIF1 35 V
CO2: Output capacitor (39F)
CH1 Vo1 4.85 5.00 5.15 VIN1 = 6 to 18V, Io = 0 to 0.3A Tantalum capacitors are recommended particularly for low
Output voltage V temperatures (tantalum capacitors of about 0.47 F in parallel).
CH2 Vo2 4.85 5.00 5.15 VIN2 = 6 to 18V, Io = 0 to 0.3A D1, D2: Protection diodes.
CH1 VDIF1 0.5 Required for protection against reverse biasing between input
Dropout voltage V and output (Recommended diode: SANKEN EU2Z).
CH2 VDIF2 0.5
CH1 RREJ1 54
Ripple rejection db f = 100 to 120Hz
CH2 RREJ2 54
10 50 VIN1 = 16V, VEN = 0V
A
Quiescent circuit current Iq 50 250 VIN1 = 35V, VEN = 0V Circuit Block Diagram
5 10 mA
GND current IGND 70 100 mA Io1 = Io2 = 0.2A
CH1 Is11 0.402 1.8 Vo1 = 4.5V Vin1 Vo1
Overcurrent protection (4 Pin)
starting current A (3 Pin)
CH2 Is21 0.201 0.8 Vo2 = 4.5V D Vo1 RESET
EN E RESET
EN TSD Drive1 Err. (14 Pin)
Residual current CH1 Is21 0.402 1.8 Vo1 = 0V (2 Pin) OCP1 T W/D
at a short A
CH2 Is22 0.201 0.8 Vo2 = 0V
Vin2 Vo2
EN output control voltage VENth 0.9 3.5 V (6 Pin) (7 Pin)
Vc D
EN output control ON IENH 50 EN = 5V
current A Vc
(5 Pin)
(Vo2: EN)
Drive2 Err. E
T
W/D/C
(11 Pin)
OFF IENL 1.0 1.0 EN = 0V OCP2
IcH 300 Vc = 5V
Vc output control current A Vo
IcL 1.0 1.0 Vc = 0V Vo2
(Main power supply)
W/D/C
Notes:
*2: Refer to Dropout Voltage.
*3: Since PD (max) = (VINVO1) IO1+ (VIN2VO2) IO2 + (VIN Iq) = 22W, VIN (max), IO1(max) and I O2(max) may be limited
depending on operating conditions.
*4: The RESET terminal is pulled up in the IC; may be directly connected to logic circuits.
*6: The thermal protection function is built in VO1 (CH1 side) only. The design thermal protection starting temperature is 151
C (min.) and 165C (typ). These values represent the design warranty.
20
Dropper Type System Regulator ICs [Surface-mount 2-output] SPF3006
Electrical Characteristics
Rise Characteristics of Output Voltage (V01) Rise Characteristics of Output Voltage (V02) Line Regulation (V01)
6 6 5.10
5.05
Output voltage VO1 (V)
IO1=0A
0.2A IO2 =0A 5.00
0.4A 0.2A
0.4A
2 2 IO1=0A
4.95 0.2A
0.4A
0 0 4.90
0 2 4 6 8 10 0 2 4 6 8 10 0 5 10 15 20 25 30
Input voltage V IN (V) Input voltage VIN (V) Input voltage VIN (V)
Dropout Voltage (V01) Dropout Voltage (V02) Overcurrent Protection Characteristics (V01)
0.6 0.6 6
Vdif1 (V)
Vdif2 (V)
0.4 0.4 4
VIN =6V
Dropout voltage
Dropout voltage
10V
Ta=150C 14V
25C 18V
40C
0.2 0.2 2
Ta=150C
25C
40C
0 0 0
0 0.2 0.4 0 0.1 0.2 0 0.2 0.4 0.6 0.8
Output current IO1 (A) Output current IO2 (A) Output current IO1 (A)
4 4
12
VIN =6V
10V
14V
18V 8
2 2
Copper foil area
4 (5.07.4mm, t=18m)
0 0 0
0 0.2 0.4 0.6 100 125 150 175 200 -50 0 50 100 150
Output current IO2 (A) Ambient temperature Ta (C) Operating temperature Ta (C)
21
Switching Type Regulator ICs SI-3201S
0.5
Built-in reference oscillator (60kHz)
4.0 0.2
7.9 0.2
Phase internally corrected
Output voltage internally corrected
16.9 0.3
Built-in overcurrent and thermal protection circuits
Built-in soft start circuit
(17.9)
a
2.6 0.1
b
(2.0)
5.0 0.6
0.95 0.15
(4.6)
(8.0)
Parameter Symbol Ratings Unit Conditions +0.2
0.1
0.45
Input voltage VIN 35 V
P1.7 0.7 4 = 6.8 0.7 3.9 0.7 (4.3)
Output voltage IO 3 A 8.2 0.7
Ratings c d
Parameter Symbol e
Unit Conditions
min typ max f
D1
+ g +
Input voltage VIN 8 18 V C1 C2
5 SS
h VS 4
Output current IO 0.5 3 A
C3 GND i
Operating temperature Top 40 +85 C TaPD characteristics
3
GND GND
Electrical Characteristics (VIN = 14V, I OUT = 2A, Tj = 25C unless otherwise specified)
C1: 1000F
C2: 1000F
L 1: 250H
D1: RK46 (Sanken)
Ratings
Parameter Symbol Unit Conditions a: Internal power supply f : Comparator
min typ max b: Thermal protection g: Overcurrent protection
c: Reference oscillator h: Error amplifier
Output voltage VO 4.80 5.00 5.20 V d: Reset i : Reference voltage
e: Latch & driver
Line regulation VO LINE 100 mV VIN = 8 to 18V
5 SS 5 SS 5 SS
C3 C3
22
Switching Type Regulator ICs SI-3201S
Electrical Characteristics
5 Io = 0A
5.10
5.05 = 1A
= 2A
Output voltage VO (V)
4.85 4.85 0
0 5 10 15 20 25 30 35 0 0.5 1.0 1.5 2.0 2.5 3.0 0 2 4 6 8 10
Input voltage VIN (V) Output current IO (A) Input voltage VIN (V)
80 5 5
VIN =18V
Output voltage VO (V)
4
70 = 10V = 7V TC = +100, 25, --20C
Efficiency
= 7V
3 3
60
2 2
50
1 1
40 0 0
0 0.5 1.0 1.5 2.0 2.5 3.0 0 1.0 2.0 3.0 4.0 5.0 0 1.0 2.0 3.0 4.0 5.0
Ta PD Characteristics
25
With infinite heatsink With silicone grease
Heatsink: aluminum
20
Power Dissipation PD (W)
15
10
0
40 0 40 80 120 160
Operating temperature Ta (C)
23
High-side Power Switch ICs [With Diagnostic Function, Surface-mount 2-circuits] SDH04
1.0 0.3
Low saturation PNP transistor use 0.25
0.75 0.05
+0.15
9.8 0.3
a
6.8max
3.0 0.2
6.3 0.2
8.0 0.5
Built-in protection against reverse connection of power supply
Tj = 150C guaranteed b
0 to 0.15
Surface-mount full-mold package +0.15
0.3 0.05 Pin 1 20.0max 8
4.0max
3.6 0.2
Drive terminal applied voltage VD 0.3 to VB V
1.4 0.2
Input terminal voltage VIN 0.3 to +7.0 V
Output terminal sink current IO (off) 2.0 mA VO = 0V, VIN = 0V *1. The base terminal (D terminal) is connected to the output
transistor base. It is also connected to the control monolithic
Saturation voltage of DIAG output VDL 0.3 V IDIAG = 3mA IC. Do not, therefore, apply an external voltage in operation.
Leak current of DIAG output IDGH 100 A VDIAG = 5V *2. SDH04 have two or three terminals of the same function (VB,
Out1, Out 2, GND). The terminals of the same function must be
Open load detection resistor Ropen 1 30 k
shorted at a pattern near the product.
Overcurrent protection starting
IS 1.6 A VO = VBopr 1.9V
current
TON 8 30 s IO = 1A
Output transfer time Standard Circuit Diagram
TOFF 15 30 s IO = 1A
TPLH 10 30 s IO = 1A
DIAG output transfer time
TPHL 15 30 s IO = 1A VB
Note: * The rule of protection against reverse connection of power supply is VB = 13V, one minute PZ
D1
(all terminals except, VB and GND, are open). Out
SDH04 VCC
IN
Diagnostic Function DIAG
5.1k
Load
VB
GND
3.0V
0.8V
VIN
GND Truth table
VIN VO GND
VOUT H H
GND
SHORT L L
OVER
Is VOLTAGE TSD
OPEN OPEN
GND VDIAG
Normal Shorted load Open load Overvoltage Overheat ERROR SIGNAL for CPU
24
High-side Power Switch ICs [With Diagnostic Function, Surface-mount 2-circuits] SDH04
Electrical Characteristics
Quiescent Circuit Current (dual circuit) Circuit Current (single circuit) Circuit Current (dual circuit)
VIN = 0V VIN = 5V VIN = 5V
20 50 100
Ta =
40C
Ta = 40C
40 80 Ta =
25C 40C
125C 25C
30 60
Iq (mA)
IB (mA)
IB (mA)
25C
10 125C
20 40 125C
VIN = 0V
VO shorted 10 20
VIN = 0V
VO open
0 0 0
0 10 20 30 40 46 0 10 20 30 40 46 0 10 20 30 40 46
Saturation Voltage of Output Transistor Overcurrent Protection Characteristics (Ta=40C) Overcurrent Protection Characteristics (Ta=25C)
1.5 20 20
Ta =
VB = 16V 125C VB = VB =
VB = 6V 18V 18V
15 15
1.0
VCE (sat) (V)
VO (V)
VO (V)
14V 14V
25C 10 10
0.5
40C
5 5
6V
6V
0 0 0
0 1 2 3 0 1 2 3 4 0 1 2 3 4
IO (A) IO (A) IO (A)
Overcurrent Protection Characteristics (Ta=125C) Threshold Characteristics of Input Voltage Input Terminal Source Current
VB = 14V IO = 1A VB = 14V
20 15 1.0
Ta = 125C 25C 40C
VB =
18V
0.8
15
10
14V 0.6
IIN (mA)
VO (V)
VO (V)
Ta = 125C
10
25C
0.4 40C
5
5
6V 0.2
0 0 0
0 1 2 3 4 0 1 2 3 0 2 4 6 8 10
IO (A) VIN (V) VIN (V)
0.2
IINL (A)
VDL (V)
0.5
0.1
0 0
50 0 50 100 150 50 0 50 100 150
Ta (C) Ta (C)
25
High-side Power Switch ICs [With Diagnostic Function] SI-5151S
4 0.2
7.9 0.2
Built-in overcurrent and thermal protection circuits
Built-in protection against reverse connection of power supply
16.9 0.3
TO220 equivalent full-mold package not require insulation mica
20 max
2.6 0.1
a
b
+0.2
2.9 0.3
Absolute Maximum Ratings (Ta=25C) 0.94 0.15
R-end
Parameter Symbol Ratings Unit Conditions
3.6 0.5
+0.2
0.85 0.1 0.45 0.1
Input terminal voltage VIN 0.3 to VB V P1.7 0.1 4 = 6.8 4 0.6
Parameter Symbol
Ratings
Unit Conditions
SI-5151S 3
VCC
min typ max VIN 2
DIAG
Operating power supply voltage VBopr 6.0 30 V
4 5.1k
Quiescent circuit current Iq 5 12 mA VBopr = 14V, VIN = 0V LS-TTL
or 1
Load
0.5 V IO 1.0A, VBopr = 6 to 16V CMOS
Saturation voltage of output
VCE (sat)
transistor 1.0 V IO 1.8A, VBopr = 6 to 16V
26
High-side Power Switch ICs [With Diagnostic Function] SI-5151S
Electrical Characteristics
Ta = --40C
30 V B=
Ta = 25C 6 to 16V
IB (mA)
Iq (mA)
25C 95C
5 95C 20 Ta = 95C 0.5
--40C
10
25C
0 0 0
0 10 20 30 40 0 10 20 30 40 50 0 1 2 3
Overcurrent Protection Characteristics (Ta= 40C) Overcurrent Protection Characteristics (Ta=25C) Overcurrent Protection Characteristics (Ta=100C)
16 16 16
14 14 14
VB = VB =
12 VB = 12
14V 12 14V
14V
10 10 10
VO (V)
VO (V)
VO (V)
8 8 8
6 6 6
4 4 4
2 2 2
0 0 0
0 1 2 3 0 1 2 3 0 1 2 3
Threshold input voltage Input Current (Output ON) Input Current (Output OFF)
20 1.0 2
VIN = 5V VIN = 0V
Ta = VB = 14V
VB = 14V
95C 25C 40C
15 VB = 16V
I O = 1A
IIH (mA)
IIL (A)
VO (V)
10 0.5 1
0 0 0
0 1 2 2.2 40 0 50 100 40 0 50 100
VIN (V) Ta (C) Ta (C)
VB = 14V
VDG (sat) (V)
10 5
DIAG (V)
IO = 10mA
VO (V)
0.1 8 4
6 3
4 2
2 1
0 0
40 0 50 100 0 50 100 150
Ta (C) Ta (C)
27
High-side Power Switch ICs [With Diagnostic Function] SI-5152S
4 0.2
7.9 0.2
Built-in overcurrent and thermal protection circuits
Built-in protection against reverse connection of power supply
16.9 0.3
Tj = 150C guaranteed
20 max
2.6 0.1
+0.2
2.9 0.3
0.94 0.15
Absolute Maximum Ratings (Ta = 25C)
R-end
3.6 0.5
+0.2
0.85 0.1 0.45 0.1
Power supply voltage VB 40 V
P1.7 0.1 4 = 6.8 4 0.6
Input terminal voltage VIN 0.3 to VB V
Load
Quiescent circuit current Iq 5 12 mA VBopr = 14V, VIN = 0V 1
CMOS
Saturation voltage of output 0.5 V IO 1.0A, VBopr = 6 to 16V
VCE (sat)
transistor 1.0 V IO 1.8A, VBopr = 6 to 16V
Truth table GND
Output leak current IO, leak 2 mA VCEO = 16V, VIN = 0V
VIN VO
Output ON VIH 2.0 VB V VBopr = 6 to 16V
Input voltage H H
Output OFF VIL 0.3 0.8 V VBopr = 6 to 16V L L
Output ON I IH 1 mA VIN = 5V
Input current
Output OFF I IL 0.1 mA VIN = 0V
Saturation voltage of DIAG output VDL 0.3 V VCC = 6V, VBopr = 6 to 16V, IDO = 2mA DIAG
TPLH 30 s VBopr = 14V, IO = 1A
DIAG output transfer time
TPHL 30 s VBopr = 14V, IO = 1A
Mode VIN VO DIAG
Minimum load inductance L 1 mH
Normal L L L
H H H
Note: L H H
Open load H H H
* The rule of protection against reverse connection of power supply is VB = 13V, one minute
L L L
(all terminals except, VB and GND, are open). Shorted load H L L
L L L
Overheat H L L
DIAG output will be undetermined when a voltage
exceeding 25V is applied to VB terminal.
28
High-side Power Switch ICs [With Diagnostic Function] SI-5152S
Electrical Characteristics
Ta = 40C
30 VB =
Ta = 25C 6 to 16V
25C 95C
5 95C 20 Ta = 95C 0.5
40C
10
25C
0 0 0
0 10 20 30 40 0 10 20 30 40 50 0 1 2 3
Overcurrent Protection Characteristics (Ta = 40C) Overcurrent Protection Characteristics (Ta=25C) Overcurrent Protection Characteristics (Ta=100C)
16 16 16
14 14 14
VB = VB =
12 VB = 12
14V 12 14V
14V
10 10 10
VO (V)
VO (V)
VO (V)
8 8 8
6 6 6
4 4 4
2 2 2
0 0 0
0 1 2 3 0 1 2 3 0 1 2 3
Threshold input voltage Input Current (Output ON) Input Current (Output OFF)
20 1.0 2
VIN = 5V VIN = 0V
Ta = VB = 14V
95C 25C 40C VB = 14V
15 VB = 16V
IO = 1A
IIH (mA)
IIL (A)
VO (V)
10 0.5 1
0 0 0
0 1 2 2.2 40 0 50 100 40 0 50 100
VIN (V) Ta (C) Ta (C)
0.1
0
40 0 50 100
Ta (C)
29
High-side Power Switch ICs [With Diagnostic Function, Built-in Zener Diode] SI-5153S
4 0.2
7.9 0.2
Built-in overcurrent and thermal protection circuits
Built-in protection against reverse connection of power supply
16.9 0.3
Tj = 150C guaranteed
20 max
2.6 0.1
+0.2
2.9 0.3
0.94 0.15
R-end
3.6 0.5
+0.2
0.85 0.1 0.45 0.1
Parameter Symbol Ratings Unit Conditions P1.7 0.1 4 = 6.8 4 0.6
SI-5153S 3
VCC
Electrical Characteristics (Ta=25C unless otherwise specified) VIN 2
DIAG
Ratings
Parameter Symbol Unit Conditions 4 5.1k
min typ max LS-TTL
or 1
Load
Operating power supply voltage VBopr 6.0 30 V CMOS
Output ON I IH 1 mA VIN = 5V
Input current
Output OFF I IL 0.1 mA VIN = 0V
30
High-side Power Switch ICs [With Diagnostic Function, Built-in Zener Diode] SI-5153S
Electrical Characteristics
40
Ta =
40C
IB (mA)
Ta = 40C 25C 125C
5 1
25C 20
150C 150C VB = 6 to 16V 25C
10 40C
0 0 0
0 10 20 30 40 0 10 20 30 40 0 1 2 3
VB (V) VB (V) IO (A)
Overcurrent Protection Characteristics (Ta=40C) Overcurrent Protection Characteristics (Ta =25C) Overcurrent Protection Characteristics (Ta=125C)
20 20 20
VB =
VB = VB = 18V
18V 18V
15 15 15
14V
14V
VO (V)
VO (V)
VO (V)
14V
10 10 10
8V
8V 8V
5 5 5
0 0 0
0 1 2 3 4 5 0 1 2 3 4 5 0 1 2 3 4 5
IO (A) IO (A) IO (A)
Threshold Characteristics of Input Voltage Input Current (Output ON) Input Current (Output OFF)
20 1.0 5
VB = 14V VB = 14V
VIN = 5V VIN = 0V
Ta = 150C 25C 40C 4
0.8
15
VB = 16V
IO = 1A
0.6 3
I IH (mA)
I IL (A)
VO (V)
10
0.4 2
5
0.2 1
0 0 0
0 1 2 50 0 50 100 150 50 0 50 100 150
Output Terminal Leak Current Saturation Voltage of DIAG Output Thermal Protection Characteristics
2 0.5 20
VB = 14V VB = 14V VB = 14V
IDIAG = 2mA VDIAG = 5V
0.4 IO = 10mA
15 VO
IO leak (mA)
0.3
VDL (V)
VO (V)
1 10
0.2
VDIAG
5
0.1
0 0 0
50 0 50 100 150 50 0 50 100 150 0 50 100 150 200
Ta (C) Ta (C) Ta (C)
31
High-side Power Switch ICs [With Diagnostic Function, Built-in Zener Diode] SI-5154S
4 0.2
7.9 0.2
Built-in overcurrent and thermal protection circuits
Built-in protection against reverse connection of power supply
16.9 0.3
Tj = 150C guaranteed
20 max
2.6 0.1
+0.2
2.9 0.3
0.94 0.15
R-end
Absolute Maximum Ratings (Ta=25C)
+0.2
3.6 0.5
+0.2
Parameter Symbol Ratings Unit Conditions 0.85 0.1 0.45 0.1
P1.7 0.1 4 = 6.8 4 0.6
Power supply voltage VB 13 to +40 V
Load
CMOS
Quiescent circuit current Iq 5 12 mA VBopr = 14V, VIN = 0V
VBopr = 6 to 16V H H
Output ON VIH 2.0 VB V
Input voltage L L
Output OFF VIL 0.3 0.8 V VBopr = 6 to 16V
Output ON I IH 1 mA VIN = 5V
Input current
Output OFF I IL 0.1 mA VIN = 0V
32
High-side Power Switch ICs [With Diagnostic Function, Built-in Zener Diode] SI-5154S
Electrical Characteristics
40 Ta =
40C
Ta= 40C
IB (mA)
5 150C Ta =
1
125C
20 150C
25C
VB = 6 to 16V
10 40C
0 0 0
0 10 20 30 40 0 10 20 30 40 0 1 2 3
VB (V) VB (V) IO (A)
Overcurrent Protection Characteristics (Ta= 40C) Overcurrent Protection Characteristics (Ta=25C) Overcurrent Protection Characteristics (Ta=125C)
20 20 20
VB = VB =
VB =
18V 18V
18V
16 16 16
14V 14V
14V
12 12 12
VO (V)
VO (V)
VO (V)
8 8 8
8V 8V 8V
4 4 4
6V 6V 6V
0 0 0
0 1 2 3 4 5 0 1 2 3 4 5 0 1 2 3 4 5
IO (A) IO (A) IO (A)
Threshold input voltage Input Current (Output ON) Input Current (Output OFF)
20 1.0 5
VB = 14V VB = 14V
VIN = 5V VIN = 0V
Ta = 125C 25C 40C 4
0.8
15
VB = 16V
IO = 1A 0.6 3
I IH (mA)
I IL (A)
VO (V)
10
0.4 2
5
0.2 1
0 0 0
0 1 2 50 0 50 100 150 50 0 50 100 150
Output Terminal Leak Current Saturation Voltage of DIAG Output Thermal Protection Characteristics
2 0.5 20
VB = 14V VB = 14V VB = 14V
IDIAG = 2mA VDIAG = 5V
0.4 IO = 10mA
15 VO
IO leak (mA)
0.3
VDL (V)
VO (V)
1 10
0.2
VDIAG
5
0.1
0 0 0
50 0 50 100 150 50 0 50 100 150 0 50 100 150 200
Ta (C) Ta (C) Ta (C)
33
High-side Power Switch ICs [With Diagnostic Function] SI-5155S
4 0.2
7.9 0.2
Built-in overcurrent and thermal protection circuits
Built-in protection against reverse connection of power supply
16.9 0.3
Tj = 150C guaranteed
20 max
2.6 0.1
+0.2
2.9 0.3
0.94 0.15
3.6 0.5
+0.2
0.85 0.1 0.45 0.1
Power supply voltage VB 13 to +40 V
P1.7 0.1 4 = 6.8 4 0.6
Input terminal voltage VIN 0.3 to VB V
Load
Quiescent circuit current Iq 5 12 mA VBopr = 14V, VIN = 0V
CMOS
Saturation voltage of output 0.3 V IO 1.0A, VBopr = 6 to 16V
VCE (sat)
transistor 0.72 V IO 2.5A, VBopr = 6 to 16V
Truth table GND
Output leak current IO, leak 2 mA VCEO = 16V, VIN = 0V
VIN VO
Output ON VIH 2.0 VB V VBopr = 6 to 16V
Input voltage H H
Output OFF VIL 0.3 0.8 V VBopr = 6 to 16V L L
Output ON I IH 1 mA VIN = 5V
Input current
Output OFF I IL 0.1 mA VIN = 0V
34
High-side Power Switch ICs [With Diagnostic Function] SI-5155S
Electrical Characteristics
40 Ta =
40C
Ta= 40C
IB (mA)
25C 25C
5 150C Ta =
1
125C
20 150C
25C
VB = 6 to 16V
10 40C
0 0 0
0 10 20 30 40 0 10 20 30 40 0 1 2 3
VB (V) VB (V) IO (A)
Overcurrent Protection Characteristics (Ta= 40C) Overcurrent Protection Characteristics (Ta=25C) Overcurrent Protection Characteristics (Ta =125C)
20 20 20
VB = VB =
VB = 18V
18V 18V
16 16 16
14V 14V
14V
12 12 12
VO (V)
VO (V)
VO (V)
8 8 8
8V 8V 8V
4 4 4
6V 6V 6V
0 0 0
0 1 2 3 4 5 0 1 2 3 4 5 0 1 2 3 4 5
IO (A) IO (A) IO (A)
Threshold input voltage Input Current (Output ON) Input Current (Output OFF)
20 1.0 5
VB = 14V VB = 14V
VIN = 5V VIN = 0V
Ta = 125C 25C 40C
0.8 4
15
VB = 16V
IO = 1A 0.6 3
I IH (mA)
I IL (A)
VO (V)
10
0.4 2
5
0.2 1
0 0 0
0 1 2 50 0 50 100 150 50 0 50 100 150
Output Terminal Leak Current Saturation Voltage of DIAG Output Thermal Protection Characteristics
2 0.5 20
VB = 14V VB = 14V VB = 14V
IDIAG = 2mA VDIAG = 5V
0.4 IO = 10mA
15 VO
IO leak (mA)
0.3
VDL (V)
VO (V)
1 10
0.2
VDIAG
5
0.1
0 0 0
50 0 50 100 150 50 0 50 100 150 0 50 100 150 200
Ta (C) Ta (C) Ta (C)
35
High-side Power Switch ICs [With Diagnostic Function, 3-circuits] SLA2501M
Built-in Zener diode in transistor eliminates the need of (or simplifies) external
12.9 0.2
16 0.2
surge absorption circuit
9.9 0.2
a 2.45 0.2
Built-in independent overcurrent and thermal protection circuit in each circuit b
Built-in protection against reverse connection of power supply
6.4 0.5
Tj = 150C guaranteed
+0.2 +0.2 +0.2
1.15 0.1 0.65 0.1 0.55 0.1
14 P2.03 0.1 = (28.42)
29 34 39 V Tj = 25C, IC = 10mA
Surge clamp voltage VBO
28 34 40 V IC = 5mA
Saturation voltage of DIAG output VDL 0.4 V IDGH = 2mA, VBopr = 6 to 16V
TON 30 s IO = 1A VO
Output transfer time
TOFF 100 s IO = 1A
TPLH 30 s IO = 1A
VDIAG
DIAG output transfer time
TPHL 100 s IO = 1A
Note:
* The Zener diode has an energy capability of 200 mJ (single pulse).
36 * A start failure may occur if a short OFF signal of 10 ms or below is input in the VIN terminal.
High-side Power Switch ICs [With Diagnostic Function, 3-circuits] SLA2501M
Electrical Characteristics
Quiescent Circuit Current (single circuit) Circuit Current (single circuit) Saturation Voltage of Output Transistor
5 40 1.0
VIN = 0V VIN = 5V V IN = 5V
Ta = 40C V B = 6 to 16V
4 Ta =150C
30
Ta = 40C Ta = 25C Ta =125C
Ta = 25C
IB (mA)
Ta = 125C Ta = 40C
20 0.5
2 Ta = 125C
Ta = 25 C
10
1
0 0 0
0 10 20 30 40 0 10 20 30 40 0 1 2 3 3.5
Overcurrent Protection Characteristics (Ta= 40C) Overcurrent Protection Characteristics (Ta=25C) Overcurrent Protection Characteristics (Ta=125C)
20 20 20
VO (V)
VO (V)
10 10 10
0 0 0
0 1 2 3 4 0 1 2 3 4 5 0 1 2 3 4
IO (A) IO (A) IO (A)
Threshold Input Voltage Input Current (Output ON) Input Current (Output OFF)
20 1.0 20
VB = 16V I OUT = 1A VB = 14V V IN = 0V V B = 14V V IN = 0V
IIL (A)
VO (V)
10 0.5 10
0 0 0
0 1 2 3 4 --50 0 50 100 125 50 0 50 100 125
VIN (V) Ta (C) Ta (C)
0.8 Ta = --40C
VDL (V)
VO (V)
VF (V)
Ta = 25C 10 5
0.6 Ta = 125C
0.1
0.4
0.2
0 0 0
50 0 50 100 125 0 1 2 3 4 0 60 100 160 180
37
High-side Power Switch ICs [With Diagnostic Function, 4-circuits] SLA2502M
Allows direct driving using LS-TTL and C-MOS logic levels 3.2 0.15
16 0.2
12.9 0.2
9.9 0.2
a 2.45 0.2
Tj = 150C guaranteed b
6.4 0.5
Absolute Maximum Ratings (Ta=25C) +0.2
1.15 0.1
+0.2
0.65 0.1
+0.2
0.55 0.1
Parameter Symbol Ratings Unit Conditions 14 P2.03 0.1 = (28.42)
DIAG DET 1
Out1
Ratings
Parameter Symbol Unit Conditions T.S.D
min typ max
6 Drive
NI2 CONT.
TPLH 10 30 s IO = 1A
Standard Circuit Diagram
DIAG output transfer time
TPHL 15 30 s IO = 1A
Note: * The rule of protection against reverse connection of power supply is VB = 13V, one minute
VB
(all terminals except VB and GND should be open).
PZ
D1
Out
GND
3.0V
0.8V
VIN
GND Truth table
VIN VO GND
VOUT H H
GND
SHORT L L
OVER
Is VOLTAGE TSD
OPEN OPEN
38
High-side Power Switch ICs [With Diagnostic Function, 4-circuits] SLA2502M
Electrical Characteristics
Circuit Current (single circuit) Circuit Current (4 circuits) Saturation Voltage of Output Transistor
(VB = 14V)
60 200 1.0
Ta = VB
40C
50
Ta =
150 40C
25C
40 Ta =
IB (mA)
30 100 0.5
125C
40C
125C
20
VIN = 0V
50
10
VIN = 0V
0 0 0
0 10 20 30 40 46 0 10 20 30 40 46 0 1 2 3
VB (V) VB (V) IO (A)
Overcurrent Protection Characteristics (Ta=40C) Threshold Input Voltage Input Current (Output OFF)
20 20 3
VB = VB = 14V
18V VIN = 0V
15 Ta =
15
125C
25C 40C 2
14V
I IL (A)
VO (V)
VO (V)
10 10
1
5 5
6V
0 0 0
0 1 2 3 4 0 1 2 3 50 0 50 100 150
IO (A) VIN (V) Ta (C)
Input Current (Output Hi) Saturation Voltage of DIAG Output Quiescent Circuit Current (dual circuit)
VIN = 0V
0.5 0.3 20
VB = 14V
VB = 14V
IDIAG = 3mA Ta = 40V
0.4 Ta = 25V
40C
125V
25C 0.2
0.3
I IH (mA)
Iq (mA)
VDL (V)
125C 10
0.2
0.1
0.1
VO shorted
VO open
0 0 0
0 1 2 3 4 5 6 50 0 50 100 150 0 10 20 30 40 46
Thermal Protection Characteristics Output Terminal Leak Current (VO = 0V) Open Load Detection Resistor
15 1.1 15
Ta =
40C
1.0
25C
10 0.9 10
IOLEAK (mA)
ROPEN (k)
TSD
Ta =
VO1 (V)
0.6
0 0.5 0
0 50 100 150 200 5 10 15 20 25 5 10 15 20
Ta (C) VB (V) VB (V)
39
High-side Power Switch ICs [With Diagnostic Function, Surface-mount 2-circuits] SPF5003
7.5 0.2
+0.2
2.0 0.8
Absolute Maximum Ratings (Ta=25C)
Parameter Symbol Ratings Unit Conditions 1 8
+0.15
Power supply voltage VB 35 V 1.27 0.25 0.4 0.05
2.50.2
+0.15
Input terminal voltage VIN 0.3 to 7 V 0.250.05
Input terminal current I IN 5 mA
DG terminal current I DG 5 mA
DG
Electrical Characteristics (VB=14V, Ta=25C unless otherwise specified) DG
Logic
Open/Short
Sense
Ratings
Parameter Symbol Unit Conditions
min typ max
GND OUT
Operating power supply voltage VB (opr) 5.5 35 V
200 m IO=1A
Output ON resistance RDS (ON)
300 m IO=1A, Ta=80C Standard Connection Diagram
Output leak current IO, leak 50 100 A VOUT=0V
15,16 OUT2
Output ON I IH 70 200 A VIN=5V 1 VB 5V
Inpup current
Output OFF I IL 12 A VIN=0V (2, 3) SPF5003 DG1
9 6
5V
Load
Load
(10,11) DG2
Overcurrent protection starting current IS 1.9 3 A VOUT =VO 1.5V
14
Vin 1 5 Vin 2 13 4 12
Internal current limit ILim 5 A VOUT=0V (7V max) (7V max)
GND
RIN
Thermal shutdown operating temperature TTSD 155 165 C
RDG
RDG
C
P RIN
Load open detection threshold voltage Vopen 3 4.5 V U
1.5
VOUT
Recommended Operating Conditions (for one channel) Wave Form Internal current limit
TSDON
IOUT
Ratings
Parameter Unit VIN TSDOFF
min max DG High inpidance
VOUT 5V
Power supply voltage 5.5 16 V
Output transfer time
VIH 4 5.5 V VOUT 10%
VOUT Mode VIN DG VO
TON TOFF
VIL 0.3 0.9 V Normal H H H
L L L
VDG 90%
IO 1 A DG output transfer time H H H
Open load L H H
VDG VDG 10%
TPLH TPHL H L L (Limiting)
RIN 10 20 k Shorted load L L L
H L L
RDG 10 20 k Overheat L L L
40
41
High-side Power Switch ICs [With Diagnostic Function, Surface-mount 2-circuits] SPF5004
10.50.3
a
7.50.2
b
+0.2
2.00.8
Absolute Maximum Ratings (Ta=25C)
1 12
Parameter Symbol Ratings Unit Conditions
+0.15
1.270.25 0.4 0.05
2.50.2
Power supply voltage VB 35 V
+0.15
0.250.05
Input terminal voltage VIN 0.3 to 7 V
DG
Electrical Characteristics (VB=14V, Ta=25C unless otherwise specified) DG
Logic
Open/Short
Sense
Ratings
Parameter Symbol Unit Conditions
min typ max
GND OUT
Operating power supply voltage VB (opr) 5.5 35 V
150 m IO =2A
Output ON resistance RDS (ON)
250 m IO =1A, Ta=80C Standard Connection Diagram
Output leak current IO, leak 50 A VOUT =0V
14,15 OUT2
Inpup current Output ON I IH 70 A VIN =5V 1 VB 5V
Overcurrent protection starting current IS 2.6 A VOUT =VO 1.5V (4,5,6) SPF5004 DG1
13 24
5V
Load
Load
DG2
Internal current limit ILim 10 A VOUT =0V (16,17,18)
12
23 Vin 2 11 21 9
Thermal shutdown operating temperature TTSD 155 165 C Vin 1
(7V max) (7V max)
GND
Vopen 3 V RIN
Load open detection threshold voltage
RDG
RDG
C
P RIN
TON 165 s U
Output transfer time
TOFF 60 s
* Make VB of 4Pin, 5Pin, 6Pin, 16Pin, 17Pin and 18Pin short from the fin
DG leak current I DG 20 A VDG =5.5V to be plated by solder.
TPLH 70 s
DG output transfer time Timing Chart
TPHL 45 s
VIN ON VIN OFF VO open Normal OCP Normal TSD
VIN
TSDOFF
Power supply voltage 5.5 16 V DG High inpidance
VIH 4 5.5 V
42
43
High-side Power Switch ICs [With Diagnostic Function, Surface-mount 3-circuits] SPF5007
10.50.3
a
7.50.2
b
+0.2
2.00.8
Absolute Maximum Ratings (Ta=25C) 1 12
Parameter Symbol Ratings Unit Conditions +0.15
1.270.25 0.4 0.05
2.50.2
Power supply voltage VB 35 V +0.15
0.250.05
Input terminal voltage VIN 0.3 to 7 V
DG terminal current I DG 5 mA
DG
Electrical Characteristics (VB=14V, Ta=25C unless otherwise specified) DG
Logic
Open/Short
Sense
Ratings
Parameter Symbol Unit Conditions
min typ max
GND OUT
Operating power supply voltage VB (opr) 5.5 35 V
200 m IO =1A
Output ON resistance RDS (ON)
350 m IO =1A, Ta=80C Standard Connection Diagram
Output leak current IO, leak 50 100 A VOUT =0V
Load
Load
Load
DG3
GND1 GND2 GND3 IN1 IN2 IN3
Overcurrent protection starting current IS 1.9 3 A VOUT =VO 1.5V 2 7 17 3 8 18
RDG
Internal current limit ILim 5 A VOUT =0V
RDG
RDG C
Thermal shutdown operating temperature TTSD 155 165 C P
RIN U
RIN
Load open detection threshold voltage Vopen 1.5 3 4.5 V
RIN
VIN
VOUT
TSDON
IOUT
Ratings
Parameter Unit TSDOFF
min max DG High inpidance
VIH 4 5.5 V
Mode VIN DG VO
VIL 0.3 0.9 V Normal H H H
L L L
IO 1 A H H H
Open load L H H
RIN 10 20 k H L L (Limiting)
Shorted load L L L
H L L
RDG 10 20 k Overheat L L L
44
45
High-side Power Switch ICs [Surface-mount 2-circuit, current monitor output function] SPF5017
10.50.3
7.50.2
Absolute Maximum Ratings (Ta=25C) b
2.00.2
Parameter Symbol Ratings Unit Conditions
1 10
Power supply voltage 1 VB 0 to 32 V
+0.15
1.270.25 0.4 0.05
2.50.2
Power supply voltage 2 Vcc 0.5 to 7.0 V
+0.15
Power supply voltage 3 VB 0 to 40 V VB terminal, t = 1 min 0.250.05
Vsense+ 0.8 to 6
Current sensing voltage V a) Part No.
Vsense Vsense+Io Rsense
b) Lot No.
Output terminal voltage VOUT 2 to 32 V
VPWM
Input terminal voltage 0.5 to 7.0 V
VHold
Output current IOUT 2.0 A Block Diagram (for one channel)
Power dissipation PD 2.4 to 5.0 W Depends on surface-mount board pattern Vcc
1
SFP5017
Storage temperature Tstg 40 to +150 C VB
17
Channel temperature Tch 150 C
clamp
D
Charge
OSC Pump
S
Sense
OUT
Electrical Characteristics (VB=14V, Ta=25C unless otherwise specified) One circuit equivalent PWM
TSD OCP
MOS
19
2 Sense+
Ratings 70k
18
Parameter Symbol Unit Conditions CMOS Logic
Sense
min typ max Hold lamp +
R
3
70k 20
Min. operating power supply voltage VB min 6 V Minimum operation of OUT terminal. Sense
S/H
Operating power supply voltage 1 VB 10 14 16 V *1 5 S/H
Thermal shutdown operating temperature Ttsd 150 C * Use a Schottky Di for D2 when the Sense+ terminal
is lower than the abs. max. rated voltage (0.8V)
Operation circuit for current monitor output Io 0.2 1.2 A *1
0.2 V Io = 0A, Vcc = 5V
0.488 0.500 0.512 V Io = 0.2A, Vcc = 5V
Current monitor output voltage VSH
1.219 1.250 1.281 V Io = 0.5A, Vcc = 5V, Ta = 40 to 140C
Timing Chart
2.925 3.000 3.075 V Io = 1.2A, Vcc = 5V, Ta = 40 to 140C
Ordinary operation Thermal Ordinary operation Overcurrent Ordinary operation
(auto hold) protection (external hold) protection (auto hold)
5 mA Io = 1A, Vcc = 5V, VSH = 0V
Current monitor output current ISH
6 mA Io = 1A, Vcc = 5V, VSH = 5V VPWM
t on 15 s Vout
Output transfer time
t off 15 s
Io = 0.5A, Vcc = 5V Icoil
Output rise time tr 100 s
Output fall time tf 50 s VS/H *1 *1 *2
Current monitor output hold time t sh 500 650 s 500 to 650 500 to 650
Io = 0.5A, Vcc = 5V, usec usec
7.50.2
Absolute Maximum Ratings (Ta=25C)
+0.2
2.0 0.8
Parameter Symbol Ratings Unit Conditions
2.50.2
+0.15
Power supply voltage 3 VB 0 to 40 V VB terminal, t = 1 min 0.250.05
Vsense+ 0.8 to 6
Current sensing voltage V
Vsense Vsense+Io Rsense
Output terminal voltage VOUT 2 to 32 V
VPWM
Input terminal voltage 0.5 to 7.0 V
VHold
Output current IOUT 2.0 A Block Diagram (for one channel)
Power dissipation PD 2.0 W Depends on surface-mount board pattern Vcc
2
VB
Storage temperature Tstg 40 to +150 C 11
D
Charge
OSC
Pump
S
Sense
MOS OUT
Electrical Characteristics (VB=14V, Ta=25C unless otherwise specified) PWM
TSD OCP 14
3 Sense+
70k
Ratings CMOS Logic
13
Parameter Symbol Unit Conditions Hold
Sense
min typ max 4
lamp +
R
70k 15
Min. operating power supply voltage VB min 6 V Minimum operation of OUT terminal. Sense
S/H
Operating power supply voltage 1 VB 10 14 16 V *1 6 S/H
0.21 IOUT = 1A 1k 6
S/H
Current sensing resistance Rsense 0.01
5.1
k C LG
0.25 IOUT = 1A, Ta = 125C F
5 7
D2
C1
Overcurrent protection starting current Is 3.0 A *4
Thermal shutdown operating temperature Ttsd 150 C * Use a Schottky Di for D2 when the Sense+ terminal
is lower than the abs. max. rated voltage (0.8V)
Operation circuit for current monitor output Io 0.2 1.2 A *1
0.2 V Io = 0A, Vcc = 5V
0.488 0.500 0.512 V Io = 0.2A, Vcc = 5V
Current monitor output voltage VSH
1.219 1.250 1.281 V Io = 0.5A, Vcc = 5V, Ta = 40 to 140C
Timing Chart
2.925 3.000 3.075 V Io = 1.2A, Vcc = 5V, Ta = 40 to 140C
Ordinary operation Thermal Ordinary operation Overcurrent Ordinary operation
(auto hold) protection (external hold) protection (auto hold)
5 mA Io = 1A, Vcc = 5V, VSH = 0V
Current monitor output current ISH
6 mA Io = 1A, Vcc = 5V, VSH = 5V VPWM
t on 15 s Vout
Output transfer time
t off 15 s
Io = 0.5A, Vcc = 5V Icoil
Output rise time tr 100 s
Output fall time tf 50 s VS/H *1 *1 *2
Current monitor output hold time t sh 500 650 s 500 to 650 500 to 650
Io = 0.5A, Vcc = 5V, usec usec
7.5 0.2
(Ta=25C)
Parameter Symbol Ratings Unit Conditions
+0.2
2.0 0.8
Power supply voltage VB 40 V
Output terminal voltage VOUT 37 V * 1 8
+0.15
Input terminal voltage VIN 0.5 to +7.5 V 1.270.25 0.4 0.05
2.5 0.2
+0.15
Output current IO 1.8 A 0.25 0.05
Power Dissipation PD 2 W
Note: * At the clamping operation, refer to VOUT (clamp) in the section of electrical characteristics.
Timing Chart
OVP
VB
VOUT
VIN
Normal Overvoltage Overheat Overcurrent
Electrical Characteristics
Quiescent Circuit Current Circuit Current (single circuit) Circuit Current (4 circuits)
10 10 10
8 8 8 Ta = 25C
Ta = 25C Ta = 25C Ta = 40C
Ta = 40C Ta = 40C
6 6 6
Iq (mA)
Id (mA)
Id (mA)
Ta = 125C
4 4 4
Ta = 120C Ta = 125C
2 2 2
0 0 0
0 10 20 30 40 0 10 20 30 40 10 20 30 40
VB (V) VB (V) VB (V)
Threshold Input Voltage Output ON Voltage Forward Voltage of Output Stage Diode
15 1.0 1.5
VB = 14V
0.8 Ta = 125C
Ta = 40C Ta = 25C
Ta = 25C Ta = 40C
10 1.0
Ta = 125C
VDS (ON) (V)
0.6 Ta = 125C
VO (V)
I F (A)
Ta = 25C
0.4
5 0.5
0.2
VO = 14V
IO = 0.1A Ta = 40C
0 0 0
0 1 2 3 0 0.5 1.0 1.5 2.0 0 0.5 1.0 1.5
VIN (th) (V) IO (A) VF (V)
Ta = 40C
10 10 Ta = 25C
Ta = 125C
VO (V)
VO (V)
5 5
Ta = 120C
Ta = 25C
Ta = 40C
0 0
0 1.0 2.0 0 10 20 30 40
IO (A) VB (V)
51
Low-side Switch ICs [Surface-mount 4-circuits] SPF5009 (under development)
10.5 0.3
7.5 0.2
b
+0.2
2.00.8
Absolute Maximum Ratings (Ta=25C)
1 12
Parameter Symbol Ratings Unit Conditions
+0.15
1.27 0.25 0.4 0.05
2.5 0.2
Power supply voltage VB 40 V
+0.15
Output terminal voltage (DC) VOUT 50 V 0.250.05
Input terminal voltage V( IN, SEL, B/U) 0.5 to +6.5 V Equivalent Circuit Diagram
Diag output source current VDIAG 6.5 V
VB Gate Protection VOUT1
(7) (4)
Diag output voltage I DIAG 5 mA Ref Reg
VOUT2
(9)
Electrical Characteristics (VB =14V, Ta = 25C unless otherwise specified) VIN 2 P-GND2
(8) (11, 12)
Ratings VDIAG2
Parameter Symbol Unit Conditions (10)
min typ max
VOUT3
(16)
Power supply voltage VB (opr) 5.5 40 V
VIN 3 P-GND3
(18) (13, 14)
Quiescent circuit current Iq 9 12 mA VB =14V, VIN=0V
VDIAG3
(15)
Operating circuit current Id 12 15 mA VB =14V, VIN=5V (all inputs)
VOUT4
(21)
Input voltage VIN (H) 3.5 6.5 V VB =14V, VO=1A VIN 4 P-GND4
(20) (23, 24)
(1 to 4, SEL, B/U) VIN (L) 0.5 1.5 V VB =14V VDIAG4
(22)
DIAG output 1
VDIAG1
DIAG output 2
VDIAG2
Nomal Output 1 Output 1 Output 1 Nomal Output 1 Output 1 Output 1
Overheat Over current Open load Overheat Over current Open load
Main mode Backup mode
52
53
Low-side Switch ICs [Surface-mount 4-circuits with Output Monitor] SPF5012
10.5 0.3
7.5 0.2
b
2 0.2
Absolute Maximum Ratings (Ta=25C)
Parameter Symbol Ratings Unit Conditions 1 12
+0.15
Power supply voltage 1 VB 40 V 1.27 0.25 0.4 0.05
2.5 0.2
+0.15
Power supply voltage 2 VCC 7.5 V 0.250.05
6 A VB =14V, Ta=40C
Overcurrent protection Truth table
operating current IS 6 A VB =14V, Ta=25C
VIN VO
5 A VB =14V, Ta=125C Short L-GND and P-GND
H L
in a pattern near the product.
TON 12 s L H
Output transfer time
TOFF 8 s
VB=14V, RL=14, I O=1A
Output rise time Tr 5 s
Diag output clamping voltage VDIAG (clamp) 4.85 V VB=14V, VCC=5V, VO =40V OVP
VB
VOUT
VIN
Normal Overvoltage Overheat Overcurrent
8.5max
9.90.2
a
Absolute Maximum Ratings (Ta=25C)
b
9.5min (10.4)
Parameter Symbol Ratings Unit Conditions
2.7
Pin 1 12
Power supply voltage VS 35 V +0.2
0.85 0.1 +0.2
0.55 0.1 2.20.7
1.20.15 0.15
Breakdown voltage VO 50 V 1.45
0.7 1.0
Input voltage VIN 0.3 to +7 V 11P2.54 =27.94
56
Stepper-motor Driver ICs SLA4708M
Electrical Characteristics
Power Supply Current Characteristics Overvoltage Protection Characteristics Saturation Voltage of Output Transistor Characteristics
20
10
At Constant IS (mA)
all phases
At standby IS (A)
8
100 10
6 1.0
4
At standby (ST = 0V)
0.5
2
0 0 0 0
0 10 20 30 0 10 20 30 35 0 1.0 2.0 3.0
Power supply voltage VS (V) Power supply voltage VS (V) Output current IO (A)
10
8
T j2 T j1
6
0
0 110 120 130 140 150 160
57
2-ph Stepper-motor Driver ICs SPF7211
Built-in overcurrent and thermal protection circuits and low voltage input shutoff function
Built-in overload and disconnection detection function
a
10.50.3
7.50.2
Absolute Maximum Ratings b
20.2
Parameter Symbol Ratings Unit Remarks
1 12
Main power supply voltage VBB 40 V
+0.15
Input voltage VIN 0.3 to 15 V VIN VBB 1.270.25 0.4 0.05
0.8
2.50.2
Io
Output current A +0.15
IoPeak 1.0 Tw 1mS 0.25 0.05
Flag terminal withstand voltage VFlag 7 V VFlag VBB
Flag terminal current IFlag 3 mA
Detect voltage VRs 2 to 2 V
a) Part No.
4.1 For Ta = 25C * 1
Power dissipation PD W b) Lot No.
39 For Tc (Ttab) = 25C
Junction temperature Tj 150 C
Operating temperature Top 40 to 110 C
Storage temperature Tstg 40 to 150 C
Note: *1: With glass epoxy + copper foil board (size 5.07.4cm; t: glass epoxy = 1.6mm /copper foil = 18m)
I20 24
Out2B 13
Output current Io 0.5 A Continuous
I21
Ph2
FL1
GND
GND
GND
GND
Out2A
Rs2
FL2
Flag terminal withstand voltage VFlag 0 to 7.0 V VFlag VBB
Flag terminal current IFlag 0 to 1.0 mA PC
Detect voltage VRs 1 to 1 V (ECU) SPM
Operating temperature Top 40 to 110 C
12 Out1B
Out1A
GND
GND
GND
Ph1
Rs1
VBB
Set
1 I10
I11
Ct
Electrical Characteristics
Ratings Rs
Parameter Symbol min typ max Unit Conditions Ct VBB = 6 to 18V
IBB 50 mA In ordinary operation (no load) 2200pF
Main power supply current +
IBBS 50 A At sleep Rs 1 typ (1 to 2W)
Low voltage protection operation voltage VUVLO 3.5 4.5 V IoM VRs/Rs
UVLO hysteresis voltage VUVLOhys 0.5 V
IoleakL 100 A VBB = 40V, Vo = 0V
Output leak current
IoleakH 100 A VBB = Vo = 40V Excitation Signal Time Chart
0.5 V Io = 0.5A 2-phase excitation
VsatL Clock 0 1 2 3 0 1
0.8 V Io = 0.8A
Output saturation voltage Ph1 L H H L L H
1.2 V Io = 0.5A
VsatH I10, I11 H H H H H H
1.5 V Io = 0.8A Ph2 L L H H L L
V FL 1.2 V Io = 0.5A I20, I21 H H H H H H
Recovery diode forward voltage V FH 1.3 V Io = 0.5A
VFGO 1.2 V Io = 0.5A 1 to 2-phase excitation
VIL 0.8 V Clock 0 1 2 3 4 5 6 7 0 1 2 3
Input voltage Ph1 L H H H H L L L L H H H
Input terminal VIH 2.0 V
Hysteresis voltage VIhys 0.5 V I10, I11 H L H H H L H H H L H H
Ph2 L L L H H H H L L L L H
IIL 5 5 A
Ph terminal Input current I20, I21 H H H L H H H L H H H L
IIH 5 5 A
* For the 1 to 2-phase excitation application, switch the Ph signal in the step of 1-ph
IIL 30 A VIL = 0.8V excitation (Ixx turns from high to low).
Ixx, Set terminals Input current
IIH 50 A VIH = 2.0V The OPEN detection function is invalid except in this sequence.
660 700 740 mV Ix0 = High, Ix1 = High
Detect voltage VRs 420 450 480 mV Ix0 = Low, Ix1 = High
40 70 90 mV Ix0 = High, Ix1 = Low
Oscillation frequency Fosc 28.8 48 72 kHz Ct = 2200pF20%
PWM frequency FPWM 14.4 24 36 kHz Ct = 2200pF20%
VctL 0.5 V
Ct terminal threshold voltage
VctH 1.5 V
Ictsink 720 A *1
Ct terminal current
Ictsouce 120 A
VocpL 1.5 3.0 4.2 V Out voltage
VocpH VBB2.5 VBB2.0 VBB1.7 V Out voltage
Overcurrent detection voltage
VocpL 1.0 1.85 V VBB = 5.5V
VocpH VBB2.3 VBB1.5 V VBB = 5.5V
Open detection voltage Vopen 60 mV Sence voltage
Flag terminal leak current IleakFlag 10 A VFlag = 7V
Flag terminal saturation voltage VFlagL 0.5 V IFlag = 1mA
Flag terminal current IFlag 3 mA
Response pulse Tpw 10 S In ordinary operation
width Tpws 100 S At sleep
Set terminal
Pulse rate Fclock 17 24 31 Hz Ct = 2200pF
Pulse number Pulse 256
tocp1 2.5 5.0 10.0 S In ordinary operation; Ct = 2200pF
OCP operation tocp2 5.0 10.0 20.0 S At switching the phase
Flag response
tocp3 5.0 10.0 20.0 S When Ixx shifts from L to H
time
topen1 2.5 5.0 10.0 S In ordinary operation
Open operation
topen2 2.5 5.0 10.0 S When Ixx shifts from L to H
tonH1 1.5 S
toffH1 1.5 S
tonH2 100 S
toffH2 100 S
I/O propagation time
tonL1 2.0 S
toffL1 0.5 S
tonL2 100 S
toffL2 100 S
Thermal protection temperature Tj 150 C
Thermal protection hysteresis Tj 20 C
Thermal alarm temperature Talarm 120 130 140 C *2
Thermal alarm hysteresis Talarm 20 C
Note:
58 *1: The Ct terminal threshold voltage and current are the design values. Warranty is based on the oscillation frequency.
*2: Thermal protection and alarm temperatures are design values.
2-ph Stepper-motor Driver ICs SPF7211
Electrical Characteristics
VsatH VFGO
1 1.5
Saturation voltage Vsat (V)
0.6 1.1
VFH
0.4 VsatL 0.9
VFL
0.2 0.7
0 0.5
30 10 10 30 50 70 90 110 130 150 30 10 10 30 50 70 90 110 130 150
Junction temperature (C) Junction temperature (C)
j-tab 3.2C/W
53
Power dissipation PD (W)
FOSC 30
51
20
49
59
Full Bridge PWM Control DC Motor Driver ICs SI-5300
16.10.2
Built-in over current protection and thermal shut down circuits a
Built-in diagnosis function to monitor and signal the state of each protection circuits b
(4.5)
(R0.8)
Built-in vertical current prevention circuits (Dead time is defined internally.)
(4)
7.60.5
No insulator required for Sanken's original package (SPM package) R-end
(R0.8)
3.60.5
+0.2
0.750.1 +0.2
0.450.1
14 P2.030.1=(28.42)
20.5
Absolute Maximum Ratings 350.3
(Ta=25C) 4.50.7
Parameter Symbol Ratings Unit Conditions
PWM 0.3 to 7 V
Equivalent Circuit
IO 5 A
Output current VM VM VM
IO (p-p) 17 A PW 1ms, Duty 50%
B B
PWM control frequency fPWM 20 kHz Duty=20% to 80% Pre-Rec OCP OCP
Pch1 Pch2
PWM A DIAG
down A
j-c 3.7 C/W PWM edge
CONTROL
sense
Thermal resistance OCP OCP TDIAG
j-a 35 C/W B B CDIAG
Dead 1F
IN2 Time
A
PD1 3.6 W Without heatsink
Power dissipation A LGND
PD2 33.7 W With infinite heatsink PGND PGND
Note: * The dead time for the length current prevention in positive and the reversing switch is set by
internal control IC. The set point in internal IC at the dead time is 20s (typical).
Please take into account the dead time and consider the load conditions when you use the IC. Standard Connection Diagram
Relay
Electrical Characteristics (Unless, otherwise specified, Tj=Tch=25C, VM =14V, IO =3A)
Capacitor
+ 3, 5, 13
VM 1, 2
Ratings 220F
OUT1
Parameter Symbol Unit Conditions
min typ max
Battery
6 IN1 14, 15
Motor supply voltage VIN 6 18 V VM=24V (2 min.)
OUT2
V, VM-VO 0.8 V IO=3A CPU
11 IN2 M
Output saturation voltage
V, VO-PG 0.3 V IO=3A 7 PWM SI-5300
10 DIAG
I L, L 100 A VM=40V
Output leakage current
I L, H 100 A VM=40V VCC
8
9 4,12
Pull-up Resistor
tpLH 10 2
* s VPWM: L H (Vth=2.5V typ) 10k TDIAG LGND PGND
(Open Collector) Delay Capacitor
Output transmission time tpHL 15 *3 s VPWM: H L (Vth=2.5V typ) 1F
tpHL-tpLH 10 s
0.8 V IO=3A
Forward voltage VF L
1.0 V IO=10A
characteristic of diode
between drain and source 0.8 V IO=3A
VF H
1.0 V IO=10A Timing Chart
Forward Forward Reverse Reverse Stop Stop
IM1 22 mA Stop mode Duty ON Duty OFF Duty ON Duty OFF (Free Run) (Free Run) Breake Breake
Therminal name
Static circuit current IM2 22 mA Forward and reverse mode
IN1
IM3 16 mA Brake mode
IN2
VIN, H 3.0 V VIN1=VIN2=VPWM
Input terminal voltage PWM
VIN, L 2.0 V VIN1=VIN2=VPWM
High inpidance
IIN, L 100 A VIN1=VIN2=VPWM=0V OUT1
Input terminal current High inpidance
IIN, H 200 A VIN1=VIN2=VPWM=5V OUT2
1
OPC start current IOCP 16 A * GND
IOUT (A)
High inpidance
*2: Output transmission time (tpLH) *3: Output transmission time (tpHL) PWM
VPWM (5V) VPWM (5V)
VM-OUT1
PWM terminal (Pch1 VDS)
PWM terminal Vth
Vth Output transmission Output transmission VM-OUT2
VOUT (Pch2 VDS)
GND
time tpLH is time from time tpHL is time from
GND VOUT1-GND
VOUT*0.9 Vth (2.5V typ) of the Vth (2.5V typ) of the (Nch1 VDS)
OUT terminal terminal of PWM to OUT terminal terminal of PWM to VOUT2-GND
VOUT *0.1 (Nch2 VDS)
output (VOUT *0.9) of output (VOUT *0.1) of
GND OUT1
tpLH
the output terminal. tpHL
GND the output terminal.
OUT2
*4: DIAG signal output terminal is an open collector output. Use a pull-up resistor when connecting it to a logic circuit. IOUT (A)
TDIAG
DIAG DIAG Threminal 20ms
60 VCC=5V Pull-up
(min)
Full Bridge PWM Control DC Motor Driver ICs SI-5300
Electrical Characteristics
Output saturation voltage (Pch) Output saturation voltage (Nch) Forward voltage of Diode between drain and source
1.0 0.5 12
VM=14V VM=14V Ta=25C
10
0.8 0.4
Ta=150C Nch
8 MOS FET
Ta=150C Ta=85C
0.6 0.3
Ta=25C
I FSD (A)
Ta=85C
6
Ta=25C Ta=40C
0.4 Ta=40C 0.2 Pch
4 MOS FET
0.2 0.1
2
0 0 0
0 1 2 3 4 5 6 7 0 1 2 3 4 5 6 7 0 0.2 0.4 0.6 0.8 1.0 1.2
I O (A) I O (A) VFSD (V)
Quiescent circuit current Voltage of input terminal (Threshold voltage) Current of input terminal (SINK current)
25 16 0.6
Duty on VM=14V VM=14V
Brake 0.5
20
12
Duty off Ta=150C
0.4
15 Ta=85C
I SINK (mA)
Stop Ta=150C
I M (mA)
VO (V)
Ta=25C
8 Ta=25C 0.3
Ta=40C
10 Ta=40C
0.2
4
5
0.1
I O=0A
Ta=25C
0 0 0
0 10 20 30 40 0 1 2 3 4 5 6 7 0 1 2 3 4 5 6 7
VM (V) VIN1, IN2, PWM (V) VIN1, IN2, PWM (V)
Current of input terminal (Source current) VTDIAG VDIAG Characteristics Thermal shut down protection
Pull-up resistance =3k
12 6 6
I IN1=I IN2=PWM=0V VM=14V VM=10V
I O=0A
10 5 5
Ta=150C
IIN1, IIN2, PWM source (A)
Ta=25C
8 4 Ta=150C 4
Ta=40C Ta=25C
VDIAG (V)
VDIAG (V)
Ta=40C
6 3 3
4 2 2
2 1 1
0 0 0
0 10 20 30 40 0 1 2 3 4 5 6 100 125 150 175 200
VM (V) VTDIAG (V) Ta (C)
Pch MOS FET Safe Operating Area (SOA) Nch MOS FET Safe Operating Area (SOA) PD Ta Characteristics
100 100 40
Tc=25C Tc=25C
Allowable Power Dissipation PD (W)
I OUT (A)
10ms
20
100ms 15
100ms 10
1 1
5 No heatsink
0.3 0.3 0
2 10 40 100 2 10 40 100 40 30 0 25 50 75 100
VM-OUT (V) VOUT -PG (V) Ambient temperature Ta (C)
61
Full Bridge DC Motor Driver ICs SPF7301(under development)
Low voltage and thermal protection, excess input detecting output and input
10.50.3
terminal open protection a
7.50.2
b
20.2
Absolute Maximum Ratings (Ta=25C)
Parameter Symbol Ratings Unit Remarks 1 10
+0.15
+0.15 0.250.05
Main power supply voltage VB 0.3 to 36 V 1.270.25 0.4 0.05
2.50.2
Input terminal input voltage VIN1,VIN2 0.3 to 6 V
EN terminal voltage VEN 0.3 to 12 V
Disable terminal input voltage VDI 0.3 to 6 V
Io 7 A a) Part No.
Output current b) Lot No.
IoPeak 15 A 1kHz, Duty 1%, Pulse 10S
DIAG output current VDIAG 0.3 to 6 V
DIAG inflow current IDIAG 3 mA DIAG terminal sink current
P D1 39 W With an infinite heatsink mounted
Power dissipation
P D2 4 W *1
Junction temperature Tj 40 to 150 C
Operating temperature Top 40 to 105 C
Storage temperature Tstg 40 to 150 C
Thermal resistance
(junction to case) j-c 3.2 C/W Standard Circuit Diagram
Thermal resistance
(junction to ambient air) j-a 31 C/W Vcc
EN CP
Ccp RDIAG
Note: *1: With glass epoxy + copper foil board (size 5.0 7.4cm; t: glass epoxy = 1.6mm /copper foil = 18m) VB DIAG
Power IN1
supply
Full Brige Driver IC
OUT1
Recommended Operation Range IN2
DI SFP7301 M
Parameter Symbol Ratings Unit Remarks OUT2
R1
Main power supply voltage VB 8 to 18 V Cin R2
RDI
DI terminal input voltage VDI 0.3 to 5.3 V PGND LGND
Input terminal input voltage VINx 0.3 to 5.3 V
Output current Io 1 A
DIAG terminal voltage VDIAG 0.3 to 5.3 V
Operating temperature Top 40 to 105 C * Recommended connection parts
Pressure rise capacitor for charge pump circuits (CP to GND) Cp 33nF
DIAG terminal pull-up resistance RDIAG: 20k
Input terminal pull-down resistance R1, R2, RDI: 10k
(Tj = 30 to 125C, VB = 14V, EN = DI = 5V, Ccp = 33nF,
Electrical Characteristics RDIAG = 20k unless otherwise specified) * 2
Ratings
Parameter Symbol Unit Conditions
min typ max
IBB1 15 mA
Main power supply current
IBB2 100 A For VEN = 0V
Low voltage protection VuvloH 5.0 7.0 V
operation voltage VuvloL 4.5 6.5 V
UVLO hysteresis voltage UVLO 0.5 V
IleakHS 100 A
Output terminal leak current
IleakLS 100 A
RDS(ON)_1H 100 200 m
RDS(ON)_2H 100 200 m
Output DMOS RDS (ON)
RDS(ON)_1L 100 200 m
RDS(ON)_2L 100 200 m
VF_H1 1.5 V Io1 = 1A
Forward voltage VF_H2 1.5 V Io2 = 1A
characteristics between
output DMOS and DS VF_L1 1.5 V Io1 = 1A
VF_L2 1.5 V Io2 = 1A
Iocp1_H1 4.5 7 10 A
Overcurrent limiting Iocp1_H2 4.5 7 10 A
operation current Iocp1_L1 4.5 7 10 A
Iocp1_L2 4.5 7 10 A
Iocp2_H1 15 A
Iocp2_H2 15 A
OPC start current
Iocp2_L1 15 A
Iocp2_L2 15 A
Input terminal voltage VINxH 2 V
VIN1, VIN2 VINxL 0.8 V
Input terminal current IINxH 100 A VDI = 5V
VIN1, VIN2 IINxL 100 A VDI = 0V
VDIxH 2 V
DI terminal voltage
VDIxL 0.8 V
IDIxH 100 A VDI = 5V
DI terminal current
IDIxL 100 A VDI = 0V
EN terminal input voltage VENth 0.8 4 V
IENH 100 A VEN = 5V
EN terminal input current
IENL 10 10 A VEN = 0V
DIAG terminal output voltage VDIAG 0.8 V IDIAG = 0.5mA
DIAG terminal output current IDIAG 1.5 mA For VDIAG = 1.6V
DIAG terminal leak current IDIAGL 10 15 A
TdON 20 S Time from VINxH to Voutx0.2
TdOFF 15 S Time from VINxL to Voutx0.8
Input delay time Tr 6 S Time of Voutx from 20% to 80%
Tf 6 S Time of Voutx from 80% to 20%
Tddis 4 S Time from DIthH to Voutx0.2
Overvoltage protection operation voltage VOVP 35 40 45 V
OVP hysteresis width VOVP 5 V
Thermal protection starting temperature Ttsd_ON 151 165 C *3
Thermal protection hysteresis width Ttsd 15 C *3
Note:
*2: For the electrical characteristics for Tj = 40 to 150C, the design warranty applies to the above specification values.
62 *3: Thermal protection starting temperature is 165C (typ) by design. The above parameters are the design specifications.
63
High Voltage Full Bridge Drive ICs SLA2402M
External components such as high voltage diodes and capacitors are not required
16.00.2
13.00.2
8.5 max
a
9.90.2
b
Absolute Maximum Ratings
9.5 min
2.7
Parameter Symbol Ratings Unit Conditions
+0.2 +0.2
Power source voltage * VM 500 V 0.65 0.1 1.0 0.1 2.450.2
+0.2
Input voltage 17 P1.68 0.1 =28.56 0.55 0.1
VIN 15 V
Block Diagram
Electrical Characteristics
Ratings
Parameter Symbol Unit Conditions
min typ max 7
+12V
t d (on) 1.4 s
VCC=10A, VIN=10V,
Ignition OSC 400Hz
Delay time * t d (off) 3.3 s VM=85A, VCC
t 2.5 s IO=0.41A
IN1
HV
0V 0V
0V
10% 10% 100V
10% VOUT2
VOUT1 10%
OUT2-GND 400V
* t: t = td (on) td (off)
64
High Voltage Full Bridge Drive ICs SLA2402M
Electrical Characteristics
Quiescent circuit current Quiescent circuit current supplied high voltage Operating circuit current
3.0 3.0 3.0
150C VIN=0V VCC=VIN1(2)=10V
VIN=0V 150C
VCC=10V
0 0 0
0 5 10 15 20 0 100 200 300 400 500 0 100 200 300 400 500
Operation voltage VCC (V) High voltage VM (V) High voltage VM (V)
Quiescent circuit current supplied high voltage Quiescent circuit current Operating circuit current
5 3.0 3.5
VIN=0V Ta=25C VCC= Ta=25C VCC=
VM=400V 3.0
Quiescent circuit current ICC2 (mA)
0 0 0
0 5 10 15 20 0 100 200 300 400 500 0 100 200 300 400 500
Operation voltage VCC (V) High voltage VM (V) High voltage VM (V)
8 8 8 VCC=15V
Gate drive voltage VGL (V)
Gate drive voltage VGL (V)
VCC=9V
150C
6 6 6
105C
4 4 4 VCC=
4.5V
25C
2 2 2
40C
0 0 0
0 1 2 3 4 50 0 50 100 150 0 5 10 15
Output current (A) Ambient temperature (C) Input voltage VIN (V)
VIH
Output on-state voltage (V)
4
6
3 5
I O=2A 4 VIL
2 3
2
1
I O=0.4A 1
0 0
50 0 50 100 150 50 0 50 100 150
Ambient temperature (C) Ambient temperature (C)
65
High Voltage Full Bridge Drive ICs SLA2402M
Electrical Characteristics
High side switch turn-on, off High side switch turn-on, off Low side switch turn-on, off
5.0 5.0 5.0
Ta=25C VM=85V, I O=0.41A Ta=25C
VM=85V, I O=0.41A VCC=10V VM=85V, I O=0.41A
4.0 4.0 turn-off 4.0
turn-on, off (s)
turn-on turn-on
1.0 turn-on 1.0 1.0
0 0 0
4 6 8 10 12 14 16 50 0 50 100 150 4 6 8 10 12 14 16
Operation voltage VCC (V) Ambient temperature (C) Operation voltage VCC (V)
Low side switch turn-on, off Transient thermal resistance characteristics Safe operating area (Power MOS FET)
5.0 100 100
VM=85V, I O=0.41A
VCC=10V RDS (on)
Transient thermal resistance (C/W)
turn-off limited
4.0 10
10
100s
3.0 1
1ms
1
without heatsink
5
Power dissipation (W)
0
50 0 50 100 150
Ambient temperature (C)
66
67
High Voltage Full Bridge Drive ICs SLA2403M
External components such as high voltage diodes and capacitors are not required
16.00.2
13.00.2
8.5 max
a
9.90.2
b
Absolute Maximum Ratings
9.5 min
2.7
Parameter Symbol Ratings Unit Conditions
+0.2 +0.2
Power source voltage * VM 500 V 0.65 0.1 1.0 0.1 2.450.2
+0.2
Input voltage 17 P1.68 0.1 =28.56 0.55 0.1
VIN 15 V
IO 7 A Tc=25C
Output current a: Part No.
IO (peak) 15 A PW 250s b: Lot No.
5 (Ta=25C) W Without heatsink
Power dissipation PD
40 (Tc=25C) W With infinite heatsink
Electrical Characteristics 4 D1
MOSQ1
VCC
MOSQ2
D2 15
HO1 HO2
High-side Power MOS FET VOUT (on) 0.18 0.26 0.34 V IO=0.4A, VIN=10V * Dotted Line: Outside Connection
output on-state voltage
Lowside Power MOS FET VOUT (on) 0.18 0.26 0.34 V IO=0.4A, VGL=10V
output on-state voltage
* t: t = td (on) td (off)
VIN2 VIN1
* When pulse signal is inputted to VlN1,
RL on solid line is ON and dotted line
VM
RL is off.
On the contrary, when pulse signal is
inputted to VlN2, RL on dotted line is
ON and dotted line RL is off.
68
High Voltage Full Bridge Drive ICs SLA2403M
Electrical Characteristics
Quiescent circuit current Quiescent circuit current supplied high voltage Operating circuit current
3.0 3.0 4.0
VIN=0V VCC=VIN1(2)=10V
VIN=0V 150C VCC=10V
0.5 0.5
0.5
0 0 0
0 5 10 15 20 0 100 200 300 400 500 0 100 200 300 400 500
Operation voltage VCC (V) High voltage VM (V) High voltage VM (V)
Quiescent circuit current supplied high voltage Quiescent circuit current supplied high voltage Operating circuit current
5 3.5 4.0
150C Ta=25C
VIN=0V Ta=25C
VCC= VCC=
125C 3.0
4 15V 15V
85C 3.0
2.5
3 2.5
25C 2.0 12V
12V
2.0
1.5 10V
2 10V 1.5
40C 9V
9V
1.0
1.0
1 6V 6V
0.5 0.5
0 0 0
0 5 10 15 20 0 100 200 300 400 500 0 100 200 300 400 500
Operation voltage VCC (V) High voltage VM (V) High voltage VM (V)
VCC=VIN=10V
VCC=15V
5 VCC=10V
Input threshold voltage VIH (V)
8 8 VCC=10V
Gate drive voltage VGL (V)
150C
4
125C 6 6 VCC=
Output on-state voltage
6V
3 85C VCC=6V
4 4
2 25C
40C 2 2
1
0 0 0
0 1 2 3 4 50 0 50 100 150 200 0 5 10 15
Output current I OUT (A) Ambient temperature (C) Input voltage VIN (V)
6
Input threshold voltage VIL (V)
8
Gate drive voltage VGL (V)
3 VCC=10V
5
6
I O=2A 4
2
VCC=10V
3 4 VCC=6V
2
1 VCC=6V
2
I O=0.4A 1
0 0 0
50 0 50 100 150 50 0 50 100 150 50 0 50 100 150
69
High Voltage Full Bridge Drive ICs SLA2403M
Electrical Characteristics
High side switch turn-on, off High side switch turn-on, off Low side switch turn-on, off
5.0 5.0 5.0
Ta=25C VM=85V, I O=0.41A Ta=25C
VM=85V, I O=0.41A VCC=10V VM=85V, I O=0.41A
4.0 4.0 4.0
turn-off
turn-on, off (s)
0 0 0
4 6 8 10 12 14 50 0 50 100 150 4 6 8 10 12 14
Operation voltage VCC (V) Ambient temperature (C) Operation voltage VCC (V)
Low side switch turn-on, off Transient thermal resistance characteristics Safe operating area (Power MOS FET)
5.0 100 100
VM=85V, I O=0.41A RDS (on)
VCC=10V limited
Transient thermal resistance (C/W)
10s
4.0 10 100s
10
turn-off
3.0 1 1ms
1
0.1
1.0 0.01
Ta=25C Ta=25C
Single pulse Single pulse
0 0.001 0.01
50 0 50 100 150 0.001 0.01 0.1 1 10 100 10 100 1000
Ambient temperature (C) Power time (s) Drain to source voltage (V)
Tc=25C
40
PD (W)
30
Power derating
20
10
without heatsink
0
50 0 50 100 150
Ambient temperature (C)
70
71
High Voltage Full Bridge Drive ICs SMA2409M
10.20.2
2.70.2
a
Absolute Maximum Ratings (Ta = 25C)
(10.4)
Parameter Symbol Ratings Unit Conditions
Power supply voltage VM 500 V Power GNG to HV
Input voltage VIN 15 V
+0.2 +0.2
Operation voltage Vcc 15 V 1.16 0.1 0.65 0.1
+0.2
14 P2.03 0.1= (28.42) 0.55 0.1 1.2 0.2
Output voltage Vo 500 V
(root dimensions) (root dimensions)
Output current (DC) Io(DC) 7 A
Output current (pulses) Io(pulse) 15 A Single pulse (PW = 50s max.) 31.3 0.2
4 a: Part No.
Power dissipation PD W b: Lot No.
20 Tc = 25C
j-a 31.2
Thermal resistance CW 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
j-c 6.2 Tc = 25C
Operating temperature Topr 40 to +105 C
Storage temperature Tstg 40 to +150 C
Junction temperature Tj 150 C
IGBT single pulse
EAS 5 mJ VDD = 30V, L = 1mH, Unclamped, Ic = 3.2A
Block Diagram
avalanche resistance
ESD protection ESD 2 kV Human body model (C = 100pF, R = 1.5k)
6
Electrical Characteristics (Ta = 25C) IGBT Q2
4 IGBT Q1 VCC D2
D1 12
HO1 HO2
Ratings
Parameter Symbol Unit Conditions OUT1 MIC OUT2
min typ max 2 IGBT Q'1
LO1 LO2
IGBT Q'2
GL2 14
GL1 VIN1 HV VIN2 L GND
IGBT output breakdown voltage BVOUT 570 V Io = 100A, Tj = 25C
IGBT output leak current IOUT (off) 100 A Vo = 500V
1.0 1.2 V Io = 0.4A, VIN (or VGL) = 10V
IGBT output ON voltage VOUT (on)
3 5 7 9 8 10 11 13
1.3 1.8 V Io = 2.0A, VIN (or VGL) = 10V
CPU
Icc1 3.0 mA Vcc = 10V, VM = VIN = 0V
Quiescent circuit current
Icc2 4.0 mA Vcc = 10V, VM = 400V, VIN = 0V * Dotted Line: Outside Connection
Operating circuit current Icc3 4.0 mA Vcc = 10V, VM = 400V, VIN1 (or VIN2) = 10V
VIH 0.8Vcc V
Input threshold voltage Vcc = 9 to 15V
VIL 0.2Vcc V
Low-side IGBT gate drive voltage VGL 0.8Vcc 16 V Vcc = 9 to 15V
t d (on) 0.6 0.7 0.8 s
Timing Chart
High side VM = 85V, Io = 0.41A
t d (off) 1.8 2.2 2.6 s Vcc = 10V A Drive Example
Delay time* t d (on) 0.8 0.9 1.0 s VIN = 10V (Out Stage = ON) Ignition OSC250Hz
Low side VIN = 0V (Out Stage = OFF) VCC
t d (off) 1.3 1.6 1.9 s
IN1
t d = H/S t d (off) - L/S t d (on)
td 2.5 s
or L/S t d (off) - H/S t d (on) IN2
LO2
0V
Recommended Operation Range HVGND
400V
85V
Ratings OUT1GND 0V
Parameter Symbol Unit Conditions 85V
min typ max 400V
Dead time td 5.0 s Ta = 40 to +105C 0V
OUT2GND 85V
400V
* About delay time
Signal input waveform vs output waveform
1 Highside switch turn-on, turn-off 2 Lowside switch turn-on, turn-off
VIN1 VIN1
0V 10% 10% 0V 10% 10%
0V 0V 10%
10%
Vout2
10% 10%
Vout1
td(on) td(off)
Conditions
Measurement Circuit
VCC=10V, VIN=10V (pulse)
VM=85V
VIN1
RL VIN2 IO=0.41A (RL=206)
VOUT1 VOUT2 * When pulse signal is inputted to VlN1,
RL on solid line is ON and dotted line
VIN2 VIN1
RL is off.
On the contrary, when pulse signal is
inputted to VlN2, RL on dotted line is
ON and dotted line RL is off.
72
High Voltage Full Bridge Drive ICs SMA2409M
Electrical Characteristics
Quiescent circuit current Quiescent circuit current supplied high voltage Operating circuit current
3.5 4.0 3.5
150C VIN=0V VCC=VIN1(2)=10V
VIN=0V VCC=10V
0 0 0
0 5 10 15 20 0 100 200 300 400 500 0 100 200 300 400 500
Operation voltage VCC (V) High voltage VM (V) High voltage VM (V)
Quiescent circuit current supplied high voltage Quiescent circuit current supplied high voltage Operating circuit current
5 3.5 3.5
150C
VIN=0V Ta=25C VCC= Ta=25C
VM=400V
Quiescent circuit current ICC2 (mA)
1.0 1.0 6V
6V
1
0.5 4.5V 0.5 4.5V
0 0 0
0 5 10 15 20 0 100 200 300 400 500 0 100 200 300 400 500
Operation voltage VCC (V) High voltage VM (V) High voltage VM (V)
VCC=VIN=10V
105C VCC=15V 12
25C
Input threshold voltage VIH (V)
8
Gate drive voltage VGL (V)
40C
10
1.5
6
Output on-state voltage
8 VCC=9V
VCC=9V
6
4
1.0
4
2
2
0.5 0 0
0 1 2 3 4 50 0 50 100 150 200 0 5 10 15
Output current I OUT (A) Ambient temperature (C) Input voltage VIN (V)
VCC=VIN=10V
1.8 7 12 VCC=15V
Input threshold voltage VIL (V)
6 10
1.6
5 VCC=15V
1.4 8
I O=2A
4 VCC=9V
1.2 6
3
VCC=9V
1.0 4
2
I O=0.4A
0.8 2
1
0.6 0 0
50 0 50 100 150 50 0 50 100 150 200 50 0 50 100 150
Ambient temperature (C) Ambient temperature (C) Ambient temperature (C)
73
High Voltage Full Bridge Drive ICs SMA2409M
Electrical Characteristics
High side switch turn-on, off High side switch turn-on, off Low side switch turn-on, off
3.0 3.5 2.0
2.5 3.0
1.5
t d (off) 2.5 t d (off)
turn-on, off (s)
0 0 0
7 9 11 13 15 50 0 50 100 150 7 9 11 13 15
Operation voltage VCC (V) Ambient temperature (C) Operation voltage VCC (V)
Low side switch turn-on, off Transient thermal resistance characteristics IGBT ASO characteristics
2.5 100 100
Transient thermal resistance (C/W)
2.0
t d (off) 10
10
1.5
1
100s
1.0
t d (on) 1
0.1 1ms
0.5
Ta = 25C
Single pulse
10ms
0 0.01 0.1
50 0 50 100 150 0.001 0.01 0.1 1 10 100 10 100 1000
Ambient temperature (C) Power time (s) Collector-emitter voltage (V)
without heatsink
4
PD (W)
3
Power derating
0
50 0 50 100 150
Ambient temperature (C)
74
75
Custom ICs
Various processing technologies of BIP, BiCMOS, CMOS and BCD can be used for the semiconductor chips.
Meets detailed user needs, especially power ICs. A wide range of general-purpose ICs is also available.
Employs a monolithic chip with flip-chip construction for increased reliability making it ideal for car electronic
devices.
Also available in hybrid ICs with transfer mold construction, multi-chip IC configuration and power monolithic
IC configuration.
Features
Examples of Sanken Automotive Hybrid ICs
All semiconductor chips used are
manufactured by Sanken.
Main product lineup consists of
Lead frame type
power ICs produced out of many One-chip power IC
multi-chip power IC
years' experience of Sanken.
Uses monolithic chips with flip-chip
construction.
Mainly available in miniature
transfer-mold packages.
Surface-mount
power IC
76
Custom ICs
9.0
9.0
19.9
16.9
10.2
16.0
16
SLA18pin 3GR-F 3GR-M STR-S
23
23
23
4.8 16 15 14 13 12 11 10 9
35 16 9
9.8
6.8
10.5
7.5
16.1
Pin 1 20.0 8
1 2 3 4 5 6 7 8
4.0
2.5
SPF20pin SPF24pin
14.740.2
+0.1
13.040.2 1.0 0.05 17.28
20 11 Fin
thickness
24 13
10.50.3
0.2
7.5
10.6
7.5
20.2
1 10
+0.15 1 12
1.270.25 0.4 0.05
2.50.2
+0.15
0.25 0.05
2.5
77
78
2 Discretes
2-1. Transistors 2-2. MOS FETs
......................................... .........................................
2-1-1. Transistors 80 2-2-1. MOS FETs 108
...... ...
2SA1488/1488A (60V/4A, 80V/4A) 80 2SK3710 (60V/70A/6m, Surface-mount) 108
....................................
2SA1567 (50V/12A) 81 2SK3711 (60V/70A/6m) .............................. 109
2SA1568 (60V/ 12A) .................................... 82 2SK3724 (60V/80A/5m, Surface-mount) ... 110
2SA1908 (120V/8A) ..................................... 83 2SK3800 (40V/70A/6m, Surface-mount) .. 111
...................................
2SB1622 (200V/15A) 84 2SK3801 (40V/70A/6m) .............................. 112
2SC3852 (60V/3A) ........................................... 85 2SK3803 (40V/85A/3m, Surface-mount) ... 113
........................................ ..........................
2SC4024 (50V/10A) 86 2SK3851 (60V/85A/4.7m) 114
...................................... ...
2SC4065 (60V/12A) 87 FKV460S (40V/60A/9m, Surface-mount) 115
STA463C (11510V/6A, 2-circuits) ............ 106 2-4-3. Power Zener Diodes ................... 129
.................. ..........
STA464C (655V/6A, 4-circuits) 107 2-4-4. General-purpose Diodes 130
79
Power Transistor 2SA1488/1488A
Absolute Maximum Ratings (Ta=25C) Electrical Characteristics (Ta = 25C) External Dimensions TO220F (full-mold)
Ratings Ratings
Symbol Unit Symbol Test Conditions Unit
2SA1488 2SA1488A 2SA1488 2SA1488A 4.2
10.0
VCBO 60 80 V 100max 100max A 3.3 2.8 C0.5
ICBO
VCEO 60 80 V VCB = 60 80 V
A
4
VEBO 6 V IEBO VEB = 6V 100max
8.4
IC 4 A V(BR) CEO IC = 25mA 60min 80min V
16.9
IB 1 A hFE VCE = 4V, IC = 1A 40min a
2.6
0.8
b
PC 25 (Tc = 25C) W VCE (sat) IC = 2A, IB = 0.2A 0.5max V
Tj 150 C fT VCE = 12V, IE = 0.2A 15typ MHz
3.9
Tstg 55 to +150 C COB VCB = 10V, f = 1MHz 90typ pF 1.35
(13.5)
1.35
0.85
IC VCE Characteristics (typ.) VCE (sat)IB Characteristics (typ.) IC VBE Temperature Characteristics (typ.)
( VC E = 4 V)
4 1.5 4
A
0m 60mA
50mA
8
40mA
3 3
30mA 1.0
VCE (sat) (V)
IC (A)
re)
IC (A)
)
)
atu
tu re
2 20mA
tu re
2
per
p e ra
p e ra
tem
m
m
0.5
e te
se
10mA
e te
(Ca
1 IC = 3A 1
(C a s
(C a s
C
IB = 5mA 2A
125
3 0 C
2 5 C
1A
0 0 0
0 1 2 3 4 5 6 0.01 0.05 0.1 0.5 1 0 0.5 1.0 1.5
VCE (V) IB (A) VBE (V)
100 25C
(C/W)
Typ
30C
hFE
hFE
100
50
j-a
50 1
20 20 0.7
0.01 0.1 0.5 1 4 0.02 0.1 1 4 1 10 100 1000
IC (A) IC (A) t (ms)
PC (W)
W
1
IC (A)
ith
in
30 fin
15 ite
0.5 0 he
15 at
si
Without heatsink 0 nk
20 natural air cooling 10 100 2
10
0
50 2
10 50
2
0.1
Without heatsink
2
0 0.05 0
0.005 0.01 0.05 0.1 0.5 1 3 3 5 10 50 100 0 25 50 75 100 125 150
IE (A) VCE (V) Ta (C)
80
Power Transistor 2SA1567
Absolute Maximum Ratings (Ta = 25C) Electrical Characteristics (Ta=25C) External Dimensions TO220F (full-mold)
Symbol Ratings Unit Symbol Test Conditions Ratings Unit
VCBO 50 V ICBO VCB = 50V 100max A
10.0 4.2
VCEO 50 V IEBO VEB = 6V 100max A 3.3 2.8 C0.5
VEBO 6 V V(BR) CEO IC = 25mA 50min V
IC
4
12 A hFE VCE = 1V, IC = 6A 50min
8.4
IB 3 A VCE (sat) IC = 6A, IB = 0.3A 0.35max V
16.9
PC 35 (Tc = 25C) W fT VCE = 12V, IE = 0.5A 40typ MHz a
2.6
0.8
b
Tj 150 C COB VCB = 10V, f = 1MHz 330typ pF
Tstg 55 to +150 C
3.9
Typical Switching Characteristics (common emitter) 1.35
(13.5)
1.35
0.85
VCC RL IC VBB1 VBB2 IB1 IB2 t on t stg tf
(V) () (A) (V) (V) (mA) (mA) (s) (s) (s) 2.54 2.54 0.45
24 4 6 10 5 120 120 0.4typ 0.4typ 0.2typ 2.2
a) Part No.
b) Lot No.
B C E (Unit: mm)
IC VCE Characteristics (typ.) VCE (sat)IB Characteristics (typ.) IC VBE Temperature Characteristics (typ.)
( VC E = 4 V)
12 1.5 12
A
0m
20B =
0mA
15 100mA
I
10 10
8 60mA 1.0 8
VCE (sat) (V)
IC (A)
IC (A)
)
)
tu re
)
40mA
ure
6 6
ture
rat
p e ra
era
pe
IC = 12A
emp
te m
tem
4 20mA 0.5 9A 4
se t
6A
se
ase
(Ca
3A
a
10mA
C (C
C (C
2 2
5C
1A
5mA
30
25
12
0 0 0
0 1 2 3 4 5 6 2 10 100 1000 3000 0 0.2 0.4 0.6 0.8 1.0 1.2
VCE (V) IB (mA) VBE (V)
hFE
100 1
100
j-a
50 50 0.5
30 30 0.3
0.02 0.1 1 10 0.02 0.1 1 10 1 10 100 1000
IC (A) IC (A) t (ms)
10 Aluminum heatsink
Typ
m
0m Unit: mm
40
s
5 DC s
W
fT (MHz)
ith
20
PC (W)
IC (A)
in
fin
30
1
ite
he
150
at
0.5 1
si
100 50
nk
10
0 2
Without heatsink
natural air cooling 10
20 2
50 50 2
0.1
Without heatsink
0.05 2
0 0
0.05 0.1 1 12 3 5 10 50 100 0 25 50 75 100 125 150
IE (A) VCE (V) Ta (C)
81
Power Transistor 2SA1568
Absolute Maximum Ratings (Ta=25C) Electrical Characteristics (Ta=25C) External Dimensions TO220F (full-mold)
Symbol Ratings Unit Symbol Test Conditions Ratings Unit
VCBO 60 V ICBO VCB = 60V 100max A 4.2
10.0
VCEO 60 V IEBO VEB = 6V 60max mA 3.3 2.8 C0.5
VEBO 6 V V(BR) CEO IC = 25mA 60min V
4
IC 12 A hFE VCE = 1V, IC = 6A 50min
8.4
IB 3 A VCE (sat) IC = 6A, IB = 0.3A 0.35max V
16.9
PC 35 (Tc=25C) W VFEC IECO = 10A 2.5max V a
2.6
0.8
b
Tj 150 C fT VCE = 12V, IE = 0.5A 40typ MHz
Tstg 55 to +150 C COB VCB = 10V, f = 1MHz 330typ pF
3.9
1.35
(13.5)
1.35
Typical Switching Characteristics (common emitter) 0.85
IC VCE Characteristics (typ.) VCE (sat) IB Characteristics (typ.) IC VBE Temperature Characteristics (typ.)
( VC E = 1 V)
12 1.4 12
mA
150
A
20 B =
0m
100mA
I
10 10
1.0
8 8
VCE (sat) (V)
IC (A)
60mA IC = 12A
IC (A)
)
9A
ure
re)
6 6
)
tu re
40mA
rat
atu
6A
pe
p e ra
per
3A
tem
0.5
tem
4 4
m
20mA 1A
se
s e te
ase
(Ca
a
C (C
5C
10mA
C (C
2 2
12
25
30
0 0 0
0 1 2 3 4 5 6 7 10 100 1000 3000 0 0.2 0.4 0.6 0.8 1.0 1.2
VCE (V) IB (mA) VBE (V)
hFE
1
j-a
10 10
0.5
2 2 0.3
0.02 0.1 1 10 0.02 0.1 1 10 1 10 100 1000
12 12
IC (A) IC (A) t (ms)
Typ 10
0m
m
Unit: mm
s
40 5 s
DC
W
fT (MHz)
ith
PC (W)
20
IC (A)
in
fin
30
1
ite
he
150
at
0.5
si
15
nk
Without heatsink 0
10 2
20 natural air cooling
100
50 50 2 10
02
0.1
Without heatsink
0.05 2
0 0
0.05 0.1 1 10 3 5 10 50 100 0 25 50 75 100 125 150
IE (A) VCE (V) Ta (C)
82
Power Transistor 2SA1908
Absolute Maximum Ratings (Ta=25C) Electrical Characteristics (Ta=25C) External Dimensions FM100 (T03PF)
Symbol Ratings Unit Symbol Test Conditions Ratings Unit
A
0.8 0.2
VCBO 120 V ICBO VCB = 120V 10max 15.6 0.2 5.50.2
VCEO 120 V IEBO VEB = 6V 10max A 3.450.2
IC = 50mA
5.5
120min
9.50.2
VEBO 6 V V(BR) CEO V
IC 8 A hFE * VCE = 4V, IC = 3A 50min
23.0 0.3
IB 3 A VCE (sat) IC = 3A, IB = 0.3A 0.5max V 3.30.2
fT VCE = 12V, IE = 0.5A 20typ a
PC 75 (Tc=25C) W MHz
1.6
b
Tj 150 C COB VCB = 10V, f = 1MHz 300typ pF
3.0
3.3
Tstg 55 to +150 C
* Rank: O (50 to 100), P (70 to 140), Y(90 to 180) 1.75 0.8
16.2
2.15
Typical Switching Characteristics (common emitter) 1.05
+0.2
0.1
+0.2
VCC RL IC VBB1 VBB2 IB1 IB2 t on t stg tf 5.450.1 5.450.1 0.65 3.35 0.1
(V) () (A) (V) (V) (mA) (mA) (s) (s) (s) 1.5 4.4 1.5
40 10 4 10 5 400 400 0.14typ 1.40typ 0.21typ
a) Part No.
B C E b) Lot No.
(Unit : mm)
IC VCE Characteristics (typ.) VCE (sat) IB Characteristics (typ.) IC VBE Temperature Characteristics (typ.)
( VC E = 4 V)
8 3 8
A A
A
0m m
m
0 50
1
50
2 100m
A
3
6 75mA 6
2
VCE (sat) (V)
IC (A)
50mA
IC (A)
re)
)
re)
tu re
atu
atu
4 4
p e ra
per
per
tem
em
m
25mA
e te
se t
1
se
as
(Ca
a
C (C
C (C
2 IC = 8A 2
C
IB=10mA
25
125
30
4A
2A
0 0 0
0 1 2 3 4 0 0.2 0.4 0.6 0.8 1.0 0 0.5 1.0 1.5
VCE (V) IB (mA) VBE (V)
Typ 125C
(C/W )
25C
100
hFE
100 1
hFE
30C
j -a
0.5
50
50
30 30 0.2
0.02 0.1 0.5 1 5 8 0.02 0.1 0.5 1 5 8 1 10 100 1000 2000
IC (A) IC (A) t (ms)
10 10
m
s
10
Typ 5 DC 0m 60
s
W
20
it
h
fT (MHz)
in
PC (W)
IC (A)
fi
ni
te
40
he
at
1
si
nk
10 0.5
Wit h ou t h e a t sin k 20
n a t u ra l a ir c oolin g
Wit h ou t h e a t sin k
3.5
0 0.1 0
0.02 0.05 0.1 0.5 1 5 8 5 10 50 100 150 0 25 50 75 100 125 150
IE (A) VCE (V) Ta (C)
83
Power Transistor 2SB1622
5.5 0.2
3.3 0.2 3.45 0.2
0.8
VCEO 200 V ICBO VCB = 200V A 100
A
9.5 0.2
VEBO 5 V IEBO VEB = 5V 100
IC IC = 30mA 200
23.0 0.3
15 A VCEO V
IB 1 A hFE* VCE = 4V, IC = 10A 5000 30000 a
3.0
1.6
PC 85 (Tc=25C) W VCE(sat) IC = 10A, IB = 10mA 2.5 V b
3.3
Tj 150 C VBE(sat) IC = 10A, IB = 10mA 3.0 V
1.75 0.15 0.8
16.2
Tstg 55 to +150 C fT VCE = 12V, IE = 2A 60 MHz
2.150.15
COB VCB = 10V, f = 1MHz 270 pF
* Rank: O(5000 to 12000), P(6500 to 20000), Y(15000 to 30000) +0.2
1.05 0.1 0.65 0.1
+0.2
3.350.2
5.45 0.1 5.450.1
Typical Switching Characteristics
15.60.2
VCC RL IC VBB1 VBB2 IB1 IB2 t on t stg tf 1.5 4.4 1.5
(V) () (A) (V) (V) (mA) (mA) (s) (s) (s) a) Part No.
40 4 10 10 5 10 10 0.4typ 3.6typ 1.0typ b) Lot No.
B C E
(Unit : mm)
IC VCE Characteristics (typ.) VCE (sat) IB Characteristics (typ.) VCE (sat) IB Temperature Characteristics (typ.)
15 3 3
A
75C
.0
15mA 1.0mA
3
5.0mA 25C
30C
IC = 15A
0.8mA
VCE (sat) ( V )
VCE (sat) ( V )
10 2 2
IC (A)
0.5mA IC = 10A
IB = 0.3mA IC = 5A
5 1 1
0 0 0
0 2 4 6 0.2 1 10 100 200 0.1 1 10 100 200
VCE ( V ) IB (mA) IB (mA)
VCE (sat) IB Temperature Characteristics (typ.) IC VBE Temperature Characteristics (typ.) hFE IC Characteristics (typ.)
(VCE = 4V)
3 15 100000
IC = 10A VCE = 4V
50000
typ
VCE (sat) ( V )
2 10
hFE
10000
IC (A)
Ta=150C
125C 5000
100C 50C
125C 75C 25C
1 75C 5
0C
25C 30C
30C 1000
55C 0.2 0.5 1 5 10 20
0 0 IC (A)
0.2 1 10 100 200 1 2 3
IB (mA) VBE (V)
hFE IC Temperature Characteristics (typ.) ton tstg t f IC Characteristics (typ.) j-a t Characteristics
100000 10 3.0
150C VCE = 4V Ta = 25C
50000 125C 5 VCC = 40V
ton tstg tf (sec)
1.0
tstg
hFE
10000 1 0.5
tf
j-a
60 10 70
m
10
s
0m
W
5 60
ith
D. s
in
fT (MHz)
PC (W)
fin
C. 50
ite
IC (A)
he
40
at
40
si
1
nk
0.5 30
20 Without heatsink
natural air cooling
20
0.1 10
Without heatsink
0 0.05 0
0.02 0.1 0.5 1 5 10 3 10 100 500 0 25 50 75 100 125 150
84
70 IE (A) VCE ( V ) Ta (C)
Power Transistor 2SC3852
Absolute Maximum Ratings (Ta=25C) Electrical Characteristics (Ta=25C) External Dimensions TO220F (full-mold)
Symbol Ratings Unit Symbol Test Conditions Ratings Unit
VCBO 80 V ICBO VCB = 80V 10max A 10.0 4.2
VCEO 60 V IEBO VEB = 6V 100max A 3.3 2.8 C0.5
VEBO 6 V V(BR) CEO IC = 25mA 60min V
4
IC
8.4
3 A hFE VCE = 4V, IC = 0.5A 500min
IB 1 IC = 2A, IB = 50mA V
16.9
A VCE (sat) 0.5max
a
PC 25 (Tc=25C) W fT VCE = 12V, IE = 0.2A 15typ MHz 2.6
0.8
b
Tj 150 C COB VCB = 10V, f = 1MHz 50typ pF
3.9
Tstg 55 to +150 C
(13.5)
1.35
Typical Switching Characteristics (common emitter) 1.35
0.85
VCC RL IC VBB1 VBB2 IB1 IB2 t on t stg tf
(V) () (A) (V) (V) (mA) (mA) (s) (s) (s) 2.54 2.54 0.45
a) Part No.
B C E b) Lot No.
(Unit : mm)
IC VCE Characteristics (typ.) VCE (sat) IB Characteristics (typ.) IC VBE Temperature Characteristics (typ.)
( VC E = 4 V)
3 1.5 3
2 mA 8mA
=1
IB
5mA
2 1.0 2
VCE (sat) (V)
)
3mA
ure
IC (A)
IC (A)
)
re )
tu re
rat
e ra tu
pe
2mA
p e ra
tem
mp
m
1 0.5
s e te
1
se
e te
1mA
(Ca
3A
(C a s
(C a
C
0.5mA 2A
125
25C
3 0 C
IC =1A
0 0 0
0 1 2 3 4 5 6 0.001 0.005 0.01 0.05 0.1 0.5 1 0 0.5 1.0 1.1
VCE (V) IB (A) VBE (V)
hFE
1
VCB = 10V
100 100 IE = 2A
0.5
0.01 0.1 0.5 1 3 0.01 0.1 0.5 1 3 1 10 100 1000
IC (A) IC (A) t (ms)
5 10
s
10 ms
0m
s
20 DC 20
W
ith
fT (MHz)
Typ
PC (W)
in
IC (A)
1
fin
ite
he
a
ts
in
0.5
k
10 10
Without heatsink
natural air cooling
0 0.05 0
0.005 0.01 0.05 0.1 0.5 1 2 3 5 10 50 100 0 50 100 150
IE (A) VCE (V) Ta (C)
85
Power Transistor 2SC4024
Absolute Maximum Ratings (Ta=25C) Electrical Characteristics (Ta=25C) External Dimensions TO220F (full-mold)
Symbol Ratings Unit Symbol Test Conditions Ratings Unit
VCBO 100 V ICBO VCB = 100V 10max A 10.0 4.2
VCEO 50 V IEBO VEB = 15V 10max A 3.3 2.8 C0.5
VEBO 15 V V(BR) CEO IC = 25mA 50min V
4
IC 10 A hFE VCE = 4V, IC = 1A 300 to 1600
8.4
IB 3 A IC = 5A, IB = 0.1A 0.5max V
16.9
VCE (sat)
a
PC 35 (Tc=25C) W fT VCB = 12V, IE = 0.5A 24typ MHz 2.6
0.8
b
Tj 150 C COB VCB = 10V, f = 1MHz 150typ pF
3.9
Tstg 55 to +150 C
(13.5)
1.35
Typical Switching Characteristics (common emitter) 1.35
0.85
VCC RL IC IB1 IB2 t on t stg tf
(V) () (A) (A) (A) (s) (s) (s) 2.54 2.54 0.45
a) Part No.
B C E b) Lot No.
(Unit: mm)
IC VCE Characteristics (typ.) VCE (sat) IB Characteristics (typ.) IC VBE Temperature Characteristics (typ.)
( VC E = 4 V)
10 1.5 10
IB = 35mA
8 30mA 8
25mA
1.0
VCE (sat) (V)
20mA
IC (A)
6 6
)
IC (A)
ure
15mA
re)
rat
)
atu
tu re
pe
10mA
per
em
4 4
p e ra
tem
e t
0.5
m
as
10A
s e te
se
(C
5mA
Ca
5C
2 2
a
C (
5A
C (C
12
3A
25
IC = 1A
30
0 0 0
0 2 4 6 0.002 0.01 0.1 1 2 0 0.5 1.0 1.2
VCE (V) IB (A) VBE (V)
125C
Typ
(C/W)
hFE
C
30 1
j-a
0.5
PC (W)
W
IC (A)
ith
20
in
fin
ite
he
at
10 150
si
1 15
nk
10 0 2
Without heatsink
0.5 natural air cooling 1
50 50 2 00 10
0 2
Without heatsink
2
0 0.2 0
0.05 0.1 0.5 1 5 10 3 5 10 50 100 0 25 50 75 100 125 150
IE (A) VCE (V) Ta (C)
86
Power Transistor 2SC4065
Absolute Maximum Ratings (Ta=25C) Electrical Characteristics (Ta=25C) External Dimensions TO220F (full-mold)
Symbol Ratings Unit Symbol Test Conditions Ratings Unit
VCBO 60 V ICBO VCB = 60V 100max A 10.0 4.2
VCEO 60 VEB = 6V mA 3.3 2.8
V IEBO 60max C0.5
VEBO 6 V V(BR) CEO IC = 25mA 60min V
4
12
8.4
IC A hFE VCE = 1V, IC = 6A 50min
IC = 6A, IB = 1.3A V
16.9
IB 3 A VCE (sat) 0.35max
a
PC 35 (Tc=25C) W VFEC VECO = 10A 2.5max V 2.6
0.8
b
Tj 150 C fT VCE = 12V, IE = 0.5A 24typ MHz
3.9
Tstg 55 to +150 C COB VCB = 10V, f = 1MHz 180typ pF
1.35
(13.5)
1.35
0.85
Typical Switching Characteristics (common emitter)
2.54 2.54 0.45
VCC RL IC VBB1 VBB2 IB1 IB2 t on t stg tf
(V) () (A) (V) (V) (A) (A) (s) (s) (s) 2.2
IC VCE Characteristics (typ.) VCE (sat) IB Characteristics (typ.) IC VBE Temperature Characteristics (typ.)
( VC E = 1 V)
12 1.3 12
mA
A
0
0m
15 100mA
20
10 10
1.0
60mA
8 8
VCE (sat) (V)
IC (A)
)
40mA
ure
IC (A)
re)
6
rat
6
)
atu
tu re
pe
per
tem
p e ra
20mA 0.5
tem
4 4
se
m
e te
(Ca
ase
12A
C (C
(C a s
5C
IB = 10mA 9A
2 6A 2
12
25
3A
3 0 C
IC = 1A
0 0 0
0 2 4 6 0.005 0.01 0.1 1 3 0 0.5 1.0 1.1
VCE (V) IB (A) VBE (V)
25 C
50 50 3 0
hFE
hFE
1
j-a
10 10 0.5
5 5
3 3 0.2
0.02 0.1 1 10 12 0.02 0.1 1 10 12 1 10 100 1000
IC (A) IC (A) t (ms)
10 10 Unit: mm
m
0m
s
s 30
5 DC
20
fT (MHz)
PC (W)
W
IC (A)
ith
in
20
fin
1
ite
he
at
0.5
si
10
nk
150
10 15
0
Without heatsink
1 2
natural air cooling 50 50 2 00 10
02
0.1
Without heatsink
2
0 0.05 0
0.05 0.1 0.5 1 5 10 12 3 5 10 50 100 0 25 50 75 100 125 150
IE (A) VCE (V) Ta (C)
87
Power Transistor 2SC4153
Absolute Maximum Ratings (Ta=25C) Electrical Characteristics (Ta=25C) External Dimensions TO220F (full-mold)
Symbol Ratings Unit Symbol Test Conditions Ratings Unit
VCBO 200 V ICBO VCB = 200V 100max A 10.0 4.2
3.3
VCEO 120 V IEBO VEB = 8V 100max A 2.8 C0.5
VEBO 8 V V(BR) CEO IC = 50mA 120min V
4
8.4
IC 7 (pulse 14) A hFE VCE = 4V, IC = 3A 70 to 220
16.9
IB 3 A VCE (sat) IC = 3A, IB = 0.3A 0.5max V
a
PC 30 (Tc=25C) W VBE (sat) IC = 3A, IB = 0.3A 1.2max V 2.6
0.8
b
Tj 150 C fT VCE = 12V, IE = 0.5A 30typ MHz
3.9
Tstg 55 to +150 C COB VCB = 10V, f = 1MHz 110typ pF
(13.5)
1.35
1.35
0.85
Typical Switching Characteristics (common emitter)
2.54 2.54 0.45
VCC RL IC VBB1 VBB2 IB1 IB2 t on t stg tf
(V) () (A) (V) (V) (A) (A) (s) (s) (s) 2.2
IC VCE Characteristics (typ.) VCE (sat) IB Characteristics (typ.) IC VBE Temperature Characteristics (typ.)
( VC E = 4 V)
7 3 7
mA
200 0mA
5 15 6
A
100m
5 5
60mA 2
VCE (sat) (V)
IC (A)
40mA
)
ure
4 4
IC (A)
re)
rat
re )
atu
pe
ra tu
20mA
per
3 3
tem
pe
em
se
e te m
1
se t
(Ca
2 2
a
IB =10mA
(C a s
5C
C (C
12
25
1 1
3 0 C
3A 5A
IC = 1A
0 0 0
0 1 2 3 4 0.005 0.01 0.1 1 2 0 0.5 1.0 1.1
VCE (V) IB (A) VBE (V)
100 100
hFE
hFE
C
30 1
50 50
j-a
0.5
20 20 0.2
0.01 0.1 0.5 1 5 7 0.01 0.1 0.5 1 5 7 1 10 100 1000
IC (A) IC (A) t (ms)
20
s
W
fT (MHz)
ith
PC (W)
IC (A)
in
fin
20 1
ite
15
0
he
0.5 15
at
0
si
10 2
nk
100
10 50 50 2 1
Without heatsink 00
natural air cooling 2
0.1 Without heatsink
2
0 0.05 0
0.01 0.1 1 5 5 10 50 100 200 0 25 50 75 100 125 150
IE (A) VCE (V) Ta (C)
88
Power Transistor 2SD2141
Absolute Maximum Ratings (Ta=25C) Electrical Characteristics (Ta=25C) External Dimensions TO220F (full-mold)
Symbol Ratings Unit Symbol Test Conditions Ratings Unit
VCBO 38050 V ICBO VCB = 330V 10max A 10.0 4.2
3.3
VCEO 38050 V IEBO VEB = 6V 20max A 2.8 C0.5
4
8.4
IC 6 (pulse 10) A hFE VCE = 2V, IC = 3A 1500min
16.9
IB 1 A VCE (sat ) IC = 4A, IB = 20mA 1.5max V
a
PC 35 (Tc=25C) W 2.6
0.8
b
Tj 150 C
3.9
Tstg 55 to +150 C
1.35
(13.5)
1.35
0.85
a) Part No.
B C E b) Lot No.
(Unit: mm)
IC VCE Characteristics (typ.) VCE (sat) IB Characteristics (typ.) IC VBE Temperature Characteristics (typ.)
( VC E = 4 V)
10 3 10
150mA A
120mA A 20m
90m 0mA 18m
A
6
4mA
2mA 2
VCE (sat) (V)
IC (A)
IC (A)
e)
5 IC = 7A 5
re )
ur
IB = 1mA
)
ure
at
ra tu
5A
er
rat
3A
mp
pe
pe
1
te
e te m
1A
tem
e
as
(C
se
(C a s
Ca
C
5
C (
12
3 0 C
25
0 0 0
0 2 4 6 0.2 0.5 1 5 10 50 100 200 0 1.0 2.0 2.4
VCE (V) IB (mA) VBE (V)
1000 1000 C
500 25 1
hFE
hFE
500 5 C
5
0.5
j-a
100
50 100
50
10 20 0.1
0.02 0.1 0.5 1 5 10 0.02 0.1 0.5 1.0 5 10 1 10 100 1000
IC (A) IC (A) t (ms)
Aluminum heatsink
10
5 Unit: mm
0m
DC
30 30
s
1
fT (MHz)
W
PC (W)
ith
IC (A)
in
20 0.5 20
fin
ite
he
at
si
nk
89
Power Transistor 2SD2382
Absolute Maximum Ratings (Ta=25C) Electrical Characteristics (Ta=25C) External Dimensions TO220F (full-mold)
Symbol Ratings Unit Symbol Test Conditions Ratings Unit
VCBO 655 V ICBO VCB = 60V 10max A 10.0 4.2
3.3 2.8
VCEO 655 V IEBO VEB = 6V 10max A C0.5
4
6 (pulse 10)
8.4
IC A hFE VCE = 1V, IC = 1A 700 to 3000
16.9
IB 1 A VCE (sat) IC = 1.5A, IB = 15mA 0.15max V
a
PC 30 (Tc=25C) W VFEC IFEC = 6A 1.5max V 2.6
0.8
b
Tj 150 C Es/b L = 10mH, single pulse 200min mJ
3.9
Tstg 55 to +150 C
1.35
(13.5)
Typical Switching Characteristics 1.35
0.85
VCC RL IC VBB1 VBB2 IB1 IB2 t on t stg tf
(V) () (A) (V) (V) (mA) (mA) (s) (s) (s) 2.54 2.54 0.45
a) Part No.
B C E b) Lot No.
(Unit: mm)
IC VCE Characteristics (typ.) VCE (sat) IB Temperature Characteristics (typ.) IC VBE Temperature Characteristics (typ.)
(IC = 1.5A)
10 0.75 6
20mA
30mA
5
8
10mA
0.5 4
VCE (sat) (V)
6
IC (A)
IC (A)
Ta = 55C 3 Ta=55C
5mA 25C
25C
4 75C
3mA 75C
0.25 2 125C
125C
2 IB = 1mA 1
0 0 0
0 1 2 3 4 5 1 5 10 50 100 400 0 0.5 1.0 1.5
VCE (V) IB (mA) VBE (V)
Typ
(C/W)
1000 1000
hFE
500
hFE
500 Ta = 55C
25C 1
j-a
75C
100 100
125C 0.5
50 50
30 30 0.3
0.01 0.05 0.1 0.5 1 5 10 0.01 0.05 0.1 0.5 1 5 10 1 5 10 50 100 500 1000
IC (A) IC (A) t (ms)
Silicone grease
10 Aluminum heatsink
mse
25
10
1ms c
Unit: mm
ms
5
c
10
ec
D.
e
Typ 20
0m
20 C
(T
c
se
fT (MHz)
=
PC (W)
ith
c
IC (A)
25
in
15 C 15
fin
) 0
ite
1 100 150
he
1
00 2
at
10 10
si
2
nk
0.5
Without heatsink 50 5
02
5 natural air cooling
Without heatsink
0 0.1 0
0.01 0.05 0.1 0.5 1 5 10 1 5 10 50 100 0 50 100 150
IE (A) VCE (V) Ta (C)
90
Power Transistor 2SD2633
Absolute Maximum Ratings (Ta=25C) Electrical Characteristics (Ta=25C) External Dimensions TO220F (full-mold)
Symbol Ratings Unit Symbol Test Conditions Ratings Unit
VCBO 200 V ICBO VCB=200V 100max A 10.0 4.2
3.3 2.8
VCEO 150 V IEBO VEB=6V 10max mA C0.5
4
8.4
IC 8 A hFE VCE=2V, IC=6A 2000min
16.9
IB 1 A VCE (sat) IC=6A, IB=6mA 1.5max V
a
35 (Tc=25C) VBE (sat) IC=6A, IB=6mA 2.0max V 2.6
0.8
b
PC W
2 (Ta=25C, No Fin)
3.9
Tj 150 C
1.35
Tstg 55 to +150 C
(13.5)
1.35
0.85
a) Part No.
b) Lot No.
B C E
(Unit: mm)
91
Power Transistor FP812
Absolute Maximum Ratings (Ta=25C) Electrical Characteristics (Ta=25C) External Dimensions TO220F (full-mold)
Symbol Ratings Unit Symbol Test Conditions Ratings Unit
VCBO 120 V ICBO VCB = 120V 10max A 10.0 4.2
3.3 2.8
VCEO 120 V IEBO VEB = 6V 10max A C0.5
4
8.4
IC 8 (pulse 12) A hFE VCE = 4V, IC = 3A 70min
16.9
IB 3 A VCE (sat) IC = 3A, IB = 0.3A 0.3max V
a
PC 35 (Tc=25C) W 2.6
0.8
b
Tj 150 C Typical Switching Characteristics
3.9
Tstg 55 to +150 C
VCC RL IC VBB1 VBB2 IB1 IB2 t on t stg tf 1.35
(13.5)
(V) () (A) (V) (V) (mA) (mA) (s) (s) (s) 1.35
0.85
12 4 3 10 5 30 30 2.5 0.4 0.6
2.54 2.54 0.45
2.2
a) Part No.
B C E b) Lot No.
(Unit: mm)
IC VCE Characteristics (typ.) VCE (sat) I B Characteristics (typ.) IC VBE Temperature Characteristics (typ.)
(VBE = 4V)
8 2 8
A 100mA
mA
A Ic = 3A
0 0m 50m
00
2 1
75mA
3
6 6
Ic = 5A
50mA
VCE (sat) (A)
IC (A)
IC (A)
4 1 4
25mA
Tc = 40C
2 Ic = 1A 2 25C
IB = 10mA
75C
125C
0 0 0
0 1 2 3 4 5 10 50 100 500 1000 2000 0 0.5 1.0 1.5
VCE (V) IB (mA) VBE (V)
hFE
Tc = 25C
100 100 1
j-a
55C 0.5
50 50 Single Pulese
0.1
30 30 0.05
0.01 0.05 0.1 0.5 1 5 8 0.01 0.05 0.1 0.5 1 5 8 0.0002 0.001 0.01 0.1 1 10 100
IC (A) IC (A) t (sec)
Aluminum heatsink
5
m
10
Unit: mm
Typ
se
D.
0m
30
c
C
se
20 (T
c
c
=2
W
fT (MHz)
5
ith
PC (W)
C)
IC (A)
in
fin
1 20
ite
20
he
0
at
20
si
10 0
nk
0.5 2
10 100
10
natural air cooling 02
Without heatsink
Without heatsink
0 0.1 0
0.01 0.05 0.1 0.5 1 5 10 3 5 10 50 100 150 0 50 100 150
IE (A) VCE (V) Ta (C)
92
Power Transistor MN611S
Absolute Maximum Ratings (Ta=25C) Electrical Characteristics (Ta=25C) External Dimensions TO220S
Symbol Ratings Unit Ratings
Symbol Test Conditions Unit
VCBO 11510 V min typ max
VCEO 11510 V ICBO VCB=105V 10 A 10.20.3 4.440.2
(1.4)
VEBO 6 V IEBO VEB=6V 10 1.30.2
IC 6 (pulse 10) A VCEO IC=50mA 105 115 125 V
IB 1 A hFE VCE=1V, IC=1A 400 800 1500 a
1.6
+0.3
10.0 0.5
50 (Tc=25C) VCE (sat) IC=1.2A, IB=12mA 0.08 0.12 V
8.60.3
PC W b
1.2 (Ta=25C, No Fin) VFEC I FEC=6A 1.25 1.5 V +0.2
0.1 0.1
(1.5)
Tj 150 C ES/B L=10mA 45 mJ
Tstg 55 to +150 C 1.270.2
+0.3
3.0 0.5
+0.2
Typical Switching Characteristics 0.86 0.1 0.40.1
1.20.2
VCC RL VBB1 VBB2 IC IB1 IB2 ton tstg tf
2.540.5 2.540.5
(V) () (V) (V) (A) (mA) (mA) (s) (s) (s)
12 12 10 5 1 30 30 0.2typ 5.7typ 0.4typ
a) Part No.
b) Lot No.
(Unit: mm)
IC VCE Characteristics (typ.) VCE (sat) IB Characteristics (typ.)
(Ta = 25C) (Ta = 25C)
8 0.75
IC = 2A
7 30mA
6 20mA
VCE (sat) (V)
10mA 0.5
5 IC = 1.2A
IC (A)
4 5mA
3
3mA 0.25
2
1 IB = 1mA IC = 0.5A
0 0
0 1 2 3 4 5 6 0 10 100 1000
VCE (V) IB (mA)
VCE (sat) IB Temperature Characteristics (typ.) IC VBE Temperature Characteristics (typ.) IFEC VFEC Temperature Characteristics (typ.)
(IC = 1.2A) (VCE = 1V)
0.75 7 7
6 6
5 Ta = 150C 5
VCE (sat) (V)
125C
IC (A)
Ta = 150C 4 25C 4
125C 75C
55C 25C
75C 3 3
25C 55C
0.25
55C 2 2
1 1
0 0 0
0 10 100 1000 0 0.5 1.0 1.5 0 0.5 1.0 1.5
IB (mA) VBE (V) VFEC (V)
hFE IC Characteristics (typ.) (Ta = 25C) hFE IC Temperature Characteristics (typ.) ton tstg t f IC Characteristics (typ.)
(VCE = 1V) (VCE = 1V)
5000 5000 10
tstg
ton tstg tf (sec)
typ Ta = 25C
1000 1000
VCC = 12V
IB1 = IB2 = 30mA
hFE
hFE
1
Ta = 150C
125C
100 100 75C tf
25C
55C ton
30 30 0.1
0.01 0.1 1 10 0.01 0.1 1 10 0 1 2 3
Ic (A) Ic (A) Ic (A)
j-c j-a t Characteristics (Single pulse) Safe Operating Area (Single pulse) PT Ta Derating
(Tc = 25C) (Ta = 25C)
50 20 60
j-a
10
(C/W)
40
PC (W)
j-c j-a
PT =50s
IC (A)
j-c
1 PT =500s 30
1 PT =1ms
PT =10ms
20
Absolute Maximum Ratings (Ta=25C) Electrical Characteristics (Ta=25C) External Dimensions TO220S
Symbol Ratings Unit Symbol Test Conditions Ratings Unit
VCBO 38050 V ICBO VCB=330V 10max A
VCEO 38050 V IEBO VEB=6V 20max mA 10.20.3 4.440.2
(1.4)
VEBO 6 V V(BR) CEO IC=25mA 330 to 430 V 1.30.2
IC 6 (pulse 10) A hFE VCE=2V, IC=3A 1500min
IB 1 A VCE (sat) IC=4A, IB=20mA 1.5max V a
1.6
+0.3
10.0 0.5
PC 60 (Tc=25C) W
8.60.3
b
Tj 150 C +0.2
(1.5)
0.10.1
Tstg 55 to +150 C
1.270.2
+0.3
3.0 0.5
+0.2
0.86 0.1 0.40.1
1.20.2
2.540.5 2.540.5
a) Part No.
b) Lot No.
(Unit: mm)
IC VCE Characteristics (typ.) VCE (sat) I B Characteristics (typ.) IC VBE Temperature Characteristics (typ.)
(VBE =4V)
10 3 10
150mA A
120mA A 20m
90m 0mA 18m
A
6
4mA
VCE (sat) (V)
2mA 2
IC (A)
IC (A)
e)
5 IC = 7A 5
re )
ur
IB=1mA
)
ure
at
ra tu
5A
er
rat
3A
mp
pe
pe
1
te
e te m
1A
tem
e
as
(C
se
(C a s
Ca
C
5
C (
12
3 0 C
25
0 0 0
0 2 4 6 0.2 0.5 1 5 10 50 100 200 0 1.0 2.0 2.4
VCE (V) IB (mA) VBE (V)
hFE IC Characteristics (typ.) hFE IC Temperature Characteristics (typ.) j-c j-a t Characteristics
(VCE = 2V) (VCE = 2V)
10000 10000 100
5000 Typ 5000
j-c j-a (C/W)
5C
12
1000 1000 C 10 j-a
500 25
hFE
hFE
500 5C
5 j-c
100 1
50 100
50
10 20 0.1
0.02 0.1 0.5 1 5 10 0.02 0.1 0.5 1.0 5 10 0.001 0.01 0.1 1 10
IC (A) IC (A) t (s)
94
Surface-mount Power Transistor SSD103
Absolute Maximum Ratings (Ta=25C) Electrical Characteristics (Ta=25C) External Dimensions SOP8
Symbol Ratings Unit Ratings
Symbol Test Conditions Unit
VCBO 655 V min typ max
0.70.2
VCEO 655 V ICBO VCB = 60V, I E = 0A 10 A 5.4Max 0 to 10
VEBO 6 V IEBO VEB = 6V, IC = 0A 10 A 8 5
IC 6 VCEO IC = 50mA 60 65 70 V
a
IC (pulse) 10 (Pw 1mS, Duty 25%) A hFE VCE = 1V, IC = 1A 400 800 1500
6.20.3
4.7Max
b
4.40.2
IB 10 A VCE (sat) IC = 1.5A, IB = 15mA 0.11 0.15 V c
0 to 0.1
PC 1.5 *1 W VFEC I FEC = 6A 1.25 1.5 V d
0.50.2
0.42 0.05
1.50.2
5.00.2
a) Part No.
b) Corporate mark
c) Lot No.
d) Control No.
(Unit: mm)
IC VCE Characteristics (typ.) VCE (sat) I C Temperature Characteristics (typ.) IC VBE Temperature Characteristics (typ.)
(VCE = 1V)
7 0.75 6
30mA
IC/IB = 100
6 20mA
5
10mA
5
0.5 4
VCE (sat) (V)
Ta = 125C
4 Ta = 55C 75C
IC (A)
IC (A)
5mA
25C 3 25C
3 75C 55C
3mA
0.25 125C 2
2
IB = 1mA 1
1
0 0 0
0 1 2 3 4 5 0.01 0.1 1 10 0 0.5 1.0 1.5
VCC = 12V
500 1 IB1 = IB2 = 30mA
hFE
Ta = 125C
0.5
75C
25C tf
100 55C
ton
50 0.1
0.01 0.1 1 10 0 1 2 3
IC (A) IC (A)
10
s
5 5, 6, 7, 8
1m
s
10m
s
IC (A)
1 1
0.5
95
Surface-mount Power Transistor Array SDA03
Absolute Maximum Ratings (Ta=25C) Electrical Characteristics (Ta=25C) External Dimensions SMD-16A
Symbol Ratings Unit Symbol Test Conditions Ratings Unit
VCBO 60 V ICBO VCB = 60V 10max A
VCEO 60 V IEBO VEB = 6V 10max A 0.890.15 2.540.25
1.00.3
0.25
+0.15
VEBO 6 V VCEO IC = 25mA 60min V 0.75 0.05
16 9
IC 6 (pulse 12) A hFE VCE = 4V, IC = 2A 100min
a
9.80.3
6.8max
3.00.2
6.30.2
IC = 2A, IB = 0.1A V
8.00.5
IB 1 A VCE (sat) 0.4max
PT 3 (No Fin) W b
0 to 0.15
Tj 150 C Typical Switching Characteristics +0.15
0.3 0.05 Pin 1 20.0max 8
Tstg 55 to +150 C
VCC RL IC VBB1 VBB2 IB1 IB2 t on t stg tf 19.560.2
4.0max
3.60.2
1.40.2
a) Part No.
b) Lot No.
(Unit: mm)
IC VCE Characteristics VCE (sat) IC Temperature Characteristics (typ.) IC VBE Temperature Characteristics (typ.)
(VCE = 4V)
6 3 6
200mA 100mA IC / IB = 20
50mA
5 5
30mA Ta = 150C
4 2 4
VCE (sat) (V)
75C Ta = 150C
IC (A)
IC (A)
20mA 25C 75C
3 3 25C
55C
55C
2 10mA 1 2
IB = 5mA
1 1
0 0 0
0 1 2 3 4 5 0.05 0.1 1 10 0 0.5 1.0 1.5
hFE IC Temperature Characteristics ton tstg t f IC Characteristics j-a t Characteristics (Single pulse)
(Ta = 25C)
1000 5 50
VCE = 4V
ton tstg tf (sec)
500 ton
j-a (C/W)
1 VCC = 12V 10
IB1 = IB2 = 50mA 5
hFE
0.5 tf
100 Ta = 150C
75C 1
50 25C 0.1 tstg
55C
30 0.05 0.3
0.01 0.1 1 10 0.5 0.1 0.5 1 5 10 0.001 0.01 0.1 1 2
IC (A) IC (A) t (s)
10
1m
s
10 3
m
s Without heatsink 16 14 12 10
20
m
PT (W)
s
IC (A)
2
15 13 11 9
1
0.5
1 2 4 6 8
natural air cooling
Without heatsink
0.1 0
3 5 10 50 100 0 50 100 150
VCE (V) Ta (C)
96
Surface-mount Power Transistor Array SDA04
Absolute Maximum Ratings (Ta=25C) Electrical Characteristics (Ta=25C) External Dimensions SMD-16A
Symbol Ratings Unit Symbol Test Conditions Ratings Unit
VCBO 60 V ICBO VCB = 60V 10max A
VCEO 60 V IEBO VEB = 6V 10max A 0.890.15 2.540.25
1.00.3
0.25
+0.15
VEBO 6 V VCEO IC = 25mA 60min V 0.75 0.05
16 9
IC 6 (pulse 12) A hFE VCE = 4V, IC = 2A 100min
a
9.80.3
6.8max
3.00.2
6.30.2
IB 1 IC = 2A, IB = 0.1A 0.4max V
8.00.5
A VCE (sat)
PT 2.5 (No Fin) W b
0 to 0.15
Tj 150 C Typical Switching Characteristics +0.15
0.3 0.05 Pin 1 20.0max 8
Tstg 55 to +150 C
VCC RL IC VBB1 VBB2 IB1 IB2 t on t stg tf 19.56 0.2
4.0max
3.60.2
1.40.2
a) Part No.
b) Lot No.
(Unit: mm)
IC VCE Characteristics VCE (sat) IC Temperature Characteristics (typ.) IC VBE Temperature Characteristics (typ.)
(VCE = 4V)
6 3 6
200mA 100mA IC / IB = 20
50mA
5 5
30mA Ta = 150C
4 2 4
VCE (sat) (V)
75C Ta = 150C
IC (A)
IC (A)
20mA 25C 75C
3 3 25C
55C
55C
2 10mA 1 2
IB = 5mA
1 1
0 0 0
0 1 2 3 4 5 0.05 0.1 1 10 0 0.5 1.0 1.5
hFE IC Temperature Characteristics ton tstg t f IC Characteristics j-a t Characteristics (Single pulse)
(Ta = 25C)
1000 5 50
VCE = 4V
ton tstg tf (sec)
500 ton
j-a (C/W)
1 VCC = 12V 10
IB1 = IB2 = 50mA 5
hFE
0.5 tf
100 Ta = 150C
75C 1
50 25C 0.1 tstg
55C
30 0.05 0.3
0.01 0.1 1 10 0.5 0.1 0.5 1 5 10 0.001 0.01 0.1 1 2
IC (A) IC (A) t (s)
10
1m
s
10 3
m
s Without heatsink 16 10
20
m
s
PT (W)
IC (A)
2 15 9
1
0.5
1 2 8
0.1 0
3 5 10 50 100 0 50 100 150
VCE (V) Ta (C)
97
Surface-mount Power Transistor Array SDC09
Absolute Maximum Ratings (Ta=25C) Electrical Characteristics (Ta=25C) External Dimensions SMD-16A
Symbol Ratings Unit Symbol Test Conditions Ratings Unit
VCBO 655 V ICBO VCB = 60V 10max A
VCEO 655 V IEBO VEB = 6V 10max A 0.890.15 2.540.25
1.00.3
0.25
+0.15
VEBO 6 V VCEO IC = 50mA 60 to 70 V 0.75 0.05
16 9
IC 6 (pulse 10 *) A hFE VCE = 1V, IC = 1A 400 to 1500
a
9.80.3
6.8max
3.00.2
6.30.2
IB 1 A VCE (sat) IC = 1.5A, IB = 15mA 0.15max V
8.00.5
PT 2.8 W VFEC IFEC = 6A 1.5max V b
0 to 0.15
Tj 150 C Es/b L = 10mH, single pulse 80min mJ +0.15
Pin 1 8
0.3 0.05 20.0max
Tstg 55 to +150 C
0.2
19.56
* PW 100s, Duty 1%
4.0max
3.60.2
1.40.2
a) Part No.
b) Lot No.
(Unit: mm)
IC VCE Characteristics VCE (sat) IC Temperature Characteristics (typ.) IC VBE Temperature Characteristics (typ.)
(VCE = 4V)
8 0.7 6
IC /IB =100
7 IB = 0.6 5
30mA
6
20mA 0.5
4 Ta=150C
VCE (sat) (V)
5 100C
10mA 0.4 Ta=150C
IC (A)
IC (A)
100C 75C
4 3 25C
5mA 0.3 75C
55C
3 3mA 25C
2
0.2 55C
2
1mA 0.1 1
1
0 0 0
0 1 2 3 4 5 0.0001 0.001 0.01 0.1 0 0.2 0.4 0.6 0.8 1.0 1.2
hFE IC Temperature Characteristics ton tstg t f IC Characteristics j-a t Characteristics (Single pulse)
(Use substrate 42311m)
5000 10 10
VCE=1V
ton tstg tf (sec)
tstg
j-a (C/W)
1
Ta=150C tf
100C
100 75C
25C 0.1
55C
50 0.1 0.05
0.01 0.1 1 10 0 0.5 1.0 1.5 2.0 2.5 3.0 0.1 1 10 100 1000
IC (A) IC (A) t (ms)
10 50 50 1.6mm
Use substrate
0.5 5
5 ms
1 3 4 13 15 16 5 6 8 9 10 12
42311.0mm
1ms 3 Use substrate
PT (W)
IC (A)
0.5 2 14 11
10ms
1
0.1 2 7
0.05 0
0.5 1 5 10 50 100 50 0 50 100 150
VCE (V) Ta (C)
98
Power Transistor Array SLA8004
Absolute Maximum Ratings (Ta=25C) Electrical Characteristics (Ta=25C) External Dimensions SLA 12pin (LF817)
Ratings NPN PNP
Symbol Unit Symbol Unit
NPN PNP Test Conditions Ratings Test Conditions Ratings
310.2
VCBO 60 55 V ICBO VCB = 60V 100max VCB = 55V 100max A 24.40.2
3.20.15 3.8
4.80.2
VCEO 60 55 V IEBO VEB = 6V 60max VEB = 6V 60max mA 16.40.2 1.70.1
12.90.2
160.2
9.90.2
a 2.450.2
50.5
IB 3 3 A VCE (sat) IC = 6A, IB = 0.3A 0.35max I C = 6A, IB = 0.3A 0.35max V b (Root dimension)
1.20.15 4 (R1)
5 (Tc=25C, No Fin) W VFEC IFEC = 10A 2.5max IFEC = 10A 2.5max V
PT R-end
40 (Tc=25C) W +0.2
+0.2
0.55 0.1
(3)
0.85 0.1
Tj 150 C 40.7
1.450.15
11 P2.540.1= (27.94)
Tstg 55 to +150 C (Root dimension)
31.30.2
50
0m
100mA b) Lot No.
20 B =
1
0m
20
100mA
I
10 10 (Unit: mm)
60mA
8 8
60mA
IC (A)
IC (A)
40mA
6 6
40mA
20mA
4 4
20mA
IB = 10mA
2 10mA 2
0 0
0 1 2 3 4 5 6 0 2 4 6
VCE (V) VCE (V)
10
10
5
2 3
0.02 0.1 1 10 0.02 0.1 1 10 12
12
IC (A) IC (A)
10
10
5
2 3
0.02 0.1 1 10 0.02 0.1 1 10 12
12
IC (A) IC (A)
VCE (sat) IB Characteristics (typ.) VCE (sat) IB Characteristics (typ.) Equivalent Circuit Diagram
(PNP) (N PN )
1.4 1.3
1.0 4 8
1.0 R2
VCE (sat) (V)
VCE (sat) (V)
IC = 12A 5 9
9A
6A R1: 500 Typ. 3 7
3A 0.5 R2: 500 Typ. 6 10
0.5
1A
12A 2 12
9A
6A
3A R1
IC = 1A 1 11
0 0
7 10 100 1000 3000 5 10 100 1000 3000
IB (mA) IB (mA)
99
Surface-mount Power Transistor Array SPF0001
Absolute Maximum Ratings (Ta=25C) Electrical Characteristics (Ta=25C) External Dimensions SPF 20pin
Symbol Ratings Unit Ratings
Symbol Test Conditions Unit
VCBO 11510 V min typ max 14.740.2
VCEO 11510 V ICBO VCB = 105V 10 A 13.040.2 +0.1
1.0 0.05
10.50.3
a
7.50.2
PT * 2.5 (Ta = 25C) W VCE (sat) IC = 1.2A, IB = 12mA 0.08 0.12 V
b
20.2
Tj 150 C VFEC I FEC = 6A 1.25 1.5 V
Tstg 55 to +150 C Es/b L = 10mH 45 mJ 1 10
+0.15
* Use glass epoxy substrate (FR4) 70mm 100mm1.6mm 1.270.25 0.4 0.05 +0.15
0.250.05
2.50.2
(11.43)
4-( 0.8)
1 10
(3.05)
F1 F2
(4.7)
hFE IC Temperature Characteristics (typ.) VCE (sat) IB Temperature Characteristics (typ.) 20 (2.4) 11 a) Part No.
(VCE = 1V) (IC = 1.2A) b) Lot No.
(13.54)
1000 0.5 (Unit: mm)
500
150C
VCE (sat) (V)
25C
100 55C 0.25
hFE
150C
25C
50
55C
10 0
0.1 0.5 1 56 0.001 0.01 0.1 1
IC (A) IB (A)
5
8
4
6
IC (A)
IC (A)
150C
3 25C
150C
4 25C 55C
55C 2
2 1
0 0
0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4
VEC (V) VBE (V)
F1 F2
j-f
IC (A)
1
j-a j-f
1 3 8
0.1
18,19 12,13
0.1 0.01
1 10 100 200 0.00001 0.0001 0.001 0.01 0.1 1 10 100
100
Power Transistor Array STA315A
Absolute Maximum Ratings (Ta=25C) Electrical Characteristics (Ta=25C) External Dimensions STA3 (LF400A)
Symbol Ratings Unit Symbol Test Conditions Ratings Unit
20.20.2
VCBO 355 V ICBO VCB = 30V 10max A
VCEO 365 V IEBO VEB = 6V 2.7max mA
b
9.00.2
11.30.2
VEBO 6 V VCEO IC = 25mA 31 to 41 V
2.30.2
a
IC 2 (pulse 3*) A hFE VCE = 4V, IC = 0.7A 400min
IB 30 mA IC = 0.5A, IB = 5mA 0.2max V
VCE (sat)
4.70.5
3 (Ta=25C) W IC = 1A, IB = 5mA 0.5max V
PT
13.5 (Tc=25C) W VFEC IFEC = 2A 2.5max V 0.50.15
(2.54)
Tj 150 C RB 800120 1.00.25
7 2.54=17.780.25
Tstg 55 to +150 C RBE 2.00.4 k
0.50.15
4.00.2
1.20.2
* PW 1ms, Duty 25% Es/b L = 10mH, single pulse 50min mJ C1.50.5
IC VCE Characteristics (typ.) VCE (sat) IB Temperature Characteristics VCE (sat) IC Temperature Characteristics
(IC = 0.5A)
3 0.5 3
A
A
12
5mA
2 2
VCE (sat) (V)
Ta = 125C Ta = 125C
0.25
2mA 75C 75C
25C 25C
1 1 40C
IB = 1mA 40C
0 0 0
0 1 2 3 4 5 6 1 10 100 400 0 0.5 1 5
VCE (V) IB (mA) IC (A)
1000 10 IB = 0A 10
(C/W)
5
500 tf
hFE
5
Ta = 125C
ton
j-a
1
75C
25C 0.5
100 40C
50 0.1 1
0.01 0.1 0.5 1 4 0 0.5 1.0 1.5 2.0 1 10 100 1000
IC (A) Ic (A) t (ms)
W
IC (A)
ith
inf
10 ini RB 4 6
te
he 2
0.5 at
sin
k
RBE
1 8
Without heatsink
natural air cooling Withou
t heat
sink
0.1 0
1 5 10 50 0 50 100 150
VCE (V) Ta (C)
101
Power Transistor Array STA335A
Absolute Maximum Ratings (Ta=25C) Electrical Characteristics (Ta=25C) External Dimensions STA3 (LF400A)
Symbol Ratings Unit Symbol Test Conditions Ratings Unit
20.20.2
VCBO 355 V ICBO VCB = 30V 10max A
VCEO 355 V IEBO VEB = 6V 10max A
b
9.00.2
11.30.2
VEBO 6 V VCEO IC = 25mA 355 V
2.30.2
a
IC 3 A hFE VCE = 4V, IC = 0.5A 500min
IB 1 A VCE (sat) IC = 1A, IB = 5mA 0.5max V
4.70.5
2.5 (Ta=25C) W Es/b L = 10mH, single pulse 150min mJ
PT
12 (Tc=25C) W 0.50.15
(2.54)
Tj 150 C 1.00.25
Typical Switching Characteristics 72.54=17.780.25
Tstg 55 to +150 C
VCC RL IC VBB1 VBB2 IB1 IB2 ton tstg tf
0.50.15
4.00.2
1.20.2
(V) () (A) (V) (V) (mA) (mA) (s) (s) (s) C1.50.5
a) Part No.
b) Lot No.
(Unit: mm)
IC VCE Characteristics (typ.) VCE (sat) IB Temperature Characteristics IC VBE Temperature Characteristics (typ.)
(IC = 1A)
3 1 4
A
A
A 6m 5mA
15m
VCE = 4V
8m
10
4mA
3
3mA
2
VCE (sat) (V)
IC (A)
IC (A)
2mA
0.5 Ta = 125C 2
75C
IB =1mA 25C
1 Ta = 55C
55C 1 25C
75C
125C
0 0 0
0 1 2 3 0.002 0.01 0.05 0.1 0.4 0 0.5 1.0 1.5
VCE (V) IB (A) VBE (V)
hFE IC Temperature Characteristics (typ.) ton tstg t f IC Characteristics (typ.) j-a t Characteristics
(VCE = 4V)
5000 20 20
tstg VCE = 12V Single pulse
10
10 IB1 = IB2 = 5mA
ton tstg tf (S)
5
(C/W)
5
1000
hFE
500 1
j-a
Ta = 125C tf 0.5
75C 1
25C 0.5 ton
55C
100 0.3 0.1
0.01 0.05 0.1 0.5 1 3 0.05 0.1 0.5 1 5 0.1 1 10 100 1000 5000
IC (A) Ic (A) t (ms)
(A
IC (A)
ll
ci
DC rc
ui
ts
1 (T op
c= er
at 3 6
25 e)
C 5
)
0.5 Withou
t heat
sink (A
ll circui
ts oper
ate) 4 5
0.2 0
2 5 10 50 0 50 100 150
102
Power Transistor Array STA415A
Absolute Maximum Ratings (Ta=25C) Electrical Characteristics (Ta=25C) External Dimensions STA4 (LF412)
Symbol Ratings Unit Symbol Test Conditions Ratings Unit
VCBO 355 V ICBO VCB = 30V 10max A 0.2
25.25
0.2
0.2
0.2
9.0
a
11.3
IC 2 (pulse 3*) A hFE VCE = 4V, IC = 0.7A 400min
2.3
IB 30 mA IC = 0.5A, IB = 5mA 0.2max V
0.5
VCE (sat)
3.5
4 (Ta = 25C) W IC = 1A, IB = 5mA 0.5max V
PT 0.25 0.15 (2.54)
18 (Tc = 25C) W VFEC IFEC = 2A 2.5max V 1.0 0.5
0
0.3
0
0.3
0.2
0.15
0.2
* PW 1ms, Duty 25% Es/b L = 10mH, single pulse 50min mJ 0.5
C1.5
4.0
1.2
0.5
Typical Switching Characteristics 1 2 3 4 5 6 7 8 9 10
E B C B C B C B C E
IC VCE Characteristics (typ.) VCE (sat) IB Temperature Characteristics VCE (sat) IC Temperature Characteristics
(IC = 0.5A)
3 0.5 3
A
A
12
5mA
2 2
VCE (sat) (V)
Ta = 125C Ta = 125C
0.25
2mA 75C 75C
25C 25C
1 1 40C
IB = 1mA 40C
0 0 0
0 1 2 3 4 5 6 1 10 100 400 0 0.5 1 5
VCE (V) IB (mA) IC (A)
1000 10 IB = 0A 10
(C/W)
5
500 tf 5
hFE
Ta = 125C
ton
1
j-a
75C
25C 0.5
100 40C
50 0.1 1
0.01 0.1 0.5 1 4 0 0.5 1.0 1.5 2.0 1 10 100 1000
IC (A) Ic (A) t (ms)
3 5 7 9
in
1
fin
PT (W)
IC (A)
ite
he
10
at
RB 4 6 8
si
nk
2
0.5
RBE
1 10
Without heatsink
natural air cooling With
out h
eatsin
k
0.1 0
1 5 10 50 0 50 100 150
VCE (V) Ta (C)
103
Power Transistor Array STA460C
Absolute Maximum Ratings (Ta=25C) Electrical Characteristics (Ta=25C) External Dimensions STA4 (LF412)
Symbol Ratings Unit Ratings
Symbol Test Conditions Unit
VCBO 6010 V min typ max 0.2
25.25
0.2
0.2
0.2
9.0
11.3
6 a
2.3
IC A VCEO IC = 50mA 50 60 70 V
ICP 10 (Pw 1ms, Du 50%) A hFE VCE = 1V, IC = 1A 700 1500 3000
0.5
3.5
3.2 (Ta = 25C) VCE (sat) IC = 1.5A, IB = 15mA 0.09 0.15 V
PT W 0.25 0.15 (2.54)
18 (Tc = 25C) VFEC IFEC = 6A 1.25 1.5 V 1.0 0.5
0
0.3
0
0.3
Tstg 40 to +15 C
0.15
0.2
0.2
0.5
C1.5
4.0
1.2
0.5
1 2 3 4 5 6 7 8 9 10
E B C B C B C B C E
a) Part No.
b) Lot No.
(Unit: mm)
IC VCE Characteristics (typ.) hFE IC Characteristics (typ.) hFE IC Temperature Characteristics (typ.) VCE (sat) IC Temperature Characteristics (typ.)
(VCE = 1V) (VCE = 1V) (IC /IB = 100)
10 5000 5000 0.75
9 Ta = 125C
A
mA typ
0m
8 20
=3
75C 25C
IB
500 500
h FE
h FE
5 125C
5mA
4
3mA 0.25
3
2 100 100
1mA
1 50 50
0 30 30 0
0 1 2 3 4 5 0.01 0.05 0.1 0.5 1 5 10 0.01 0.05 0.1 0.5 1 5 10 0.01 0.05 0.1 0.5 1 5 10
VCE (V) IC (A) IC (A) IC (A)
VCE (sat) IB Temperature Characteristics (typ.) IC VBE Temperature Characteristics (typ.) j-a PW Characteristics
(VCE = 1V)
0.75 6 20
10
5
5
0.5 4
VCE (sat) (V)
j-a (C/W)
IC (A)
3 1
0.5
C
125
0.25 2
55C
IC = 3A
25C
Ta =
1 75C
1.5A 0.1
0.5A
0 0 0.05
1 5 10 50 100 500 0 0.5 1.0 1.5 0.1 0.5 1 5 10 50 100 500 1000 2000
IB (mA) VBE (V) PW (ms)
10
1m
10m
ms
15 5
s
W
s
ith
inf
ini
te
PT (W)
IC (A)
he
10 1 2 7
at
sin
k
0.5
5
Without heatsink
Single pulse 4 9
0.1 Without heatsink
Ta=25C
0 0.05
55 0 50 100 150 0.5 1 5 10 50 100
Ta (C) VCE (V)
104
Power Transistor Array STA461C
Absolute Maximum Ratings (Ta=25C) Electrical Characteristics (Ta=25C) External Dimensions STA4 (LF400B)
Symbol Ratings Unit Symbol Test Conditions Ratings Unit
VCBO 655 V ICBO VCB = 60V 10max A 25.25
0.2
0.2
0.2
0.2
9.0
6 (pulse 10) a
11.3
IC A hFE VCE = 1V, IC = 1A 400 to 1500
2.3
IB 1 A VCE (sat) IC = 1.5A, IB = 15mA 0.15max V
0.5
3.2 (Ta = 25C) W VFEC IFEC = 6A 1.5max V
4.7
PT
18 (Tc = 25C) W Es/b L = 10mH, single pulse 80min mJ 1.0
0.25 0.15
0.5
(2.54)
Tj 150 C
0.05
9 2.54=22.86
Tstg 55 to +150 C Typical Switching Characteristics
0.15
0.2
0.2
0.5
C1.5
VCC RL IC VBB1 VBB2 IB1 IB2 ton t stg tf
4.0
1.2
0.5
(V) () (A) (V) (V) (mA) (mA) (s) (s) (s)
12 12 1 10 5 30 30 0.2 3.9 0.2 1 2 3 4 5 6 7 8 9 10
B C E B C E
a) Part No.
b) Lot No.
(Unit: mm)
IC VCE Characteristics (typ.) VCE (sat) IC Temperature Characteristics (typ.) IC VBE Temperature Characteristics (typ.)
(VCE = 1V)
7 0.75 6
30mA
IC / IB = 100
6 20mA
5
10mA
VCE (sat) (V)
5
0.5 4 Ta = 125C
4 75C
IC (A)
5mA Ta = 55C
IC (A)
25C 3 25C
3 75C 55C
3mA
0.25 125C 2
2
IB = 1mA 1
1
0 0 0
0 1 2 3 4 5 0.01 0.1 1 10 0 0.5 1.0 1.5
(C/W)
VCC = 12V
500 1 IB1 = IB2 = 30mA 1
hFE
Ta = 125C
j-a
0.5 0.5
75C
25C tf
100 55C 0.1
ton
50 0.1 0.05
0.01 0.1 1 10 0 1 2 3 0.1 1 10 100 2000
10
s
5 15
1m
3 8
ith
in
s
10m
fin
ite
PT (W)
he
s
IC (A)
at
si
nk
10
1
2 7
0.5
5
Withou
t heat
Without heatsink sink
natural air cooling 4 9
0.1 0
1 5 10 50 100 0 50 100 150
VCE (V) Ta (C)
105
Power Transistor Array STA463C
Absolute Maximum Ratings (Ta=25C) Electrical Characteristics (Ta=25C) External Dimensions STA4 (LF400B)
Symbol Ratings Unit Symbol Test Conditions Ratings Unit
VCBO 11510 V ICBO VCB = 105V 10max A 25.25
0.2
0.2
0.2
0.2
9.0
6 (pulse 10) a
11.3
IC A hFE VCE = 1V, IC = 1A 400 to 1500
2.3
IB 1 A VCE (sat) IC = 1.2A, IB = 12mA 0.12max V
0.5
3.2 (Ta=250C) W VFEC IFEC = 6A 1.5max V
4.7
PT
18 (Tc=25C) W Es/b L = 10mH, single pulse 45min mJ 1.0
0.25 0.15
0.5
(2.54)
Tj 150 C
0.05
9 2.54=22.86
Tstg 55 to +150 C Typical Switching Characteristics
0.15
0.2
0.2
0.5
C1.5
VCC RL IC VBB1 VBB2 IB1 IB2 t on t stg tf
4.0
1.2
0.5
(V) () (A) (V) (V) (mA) (mA) (s) (s) (s)
12 12 1 10 5 30 30 0.2 5.7 0.4 1 2 3 4 5 6 7 8 9 10
B C E B C E
a) Part No.
b) Lot No.
(Unit: mm)
IC VCE Characteristics (typ.) VCE (sat) IC Temperature Characteristics (typ.) IC VBE Temperature Characteristics (typ.)
(VCE = 1V)
8 0.75 7
I C /IB = 100
7 30mA 6
6 20mA
Ta = 150C
VCE (sat) (V)
5
10mA 0.5 75C
5
4 25C
IC (A)
IC (A)
1 IB = 1mA 1
0 0 0
0 1 2 3 4 5 6 0.01 0.1 1 5 0 0.5 1.0 1.5
Single
(C/W)
transistor
500 10 operated
5
Ta = 150C
hFE
1
75C
j-a
25C 0.5 1
100
55C tf VCC = 12V 0.5
50 ton IB1 = IB2 = 30mA
30 0.1 0.1
0.01 0.1 1 10 0 1 2 3 0.0001 0.001 0.01 0.1 1 10 100 1000
15
3 8
W
VCE (sat) (V)
ith
0.5
in
fin
ite
PT (W)
he
Ta = 150C
at
si
10
nk
75C
25C 2 7
0.25 55C
5
Withou
t heat
sink
4 9
0 0
1 10 100 1000 0 50 100 150
IB (mA) Ta (C)
106
Power Transistor Array STA464C
Absolute Maximum Ratings (Ta=25C) Electrical Characteristics (Ta=25C) External Dimensions STA4
Symbol Ratings Unit Ratings
Symbol Test Conditions Unit
VCBO 655 V min typ max 25.25
0.2
0.2
0.2
0.2
9.0
a
11.3
IC 6 (pulse 10) A VCEO IC=50mA 60 65 70 V
2.3
IB 1 A hFE VCE=1V, IC=1A 400 800 1500
0.5
3.5
20 (Tc=25C) VCE (sat) IC=1.5A, IB=15mA 0.09 0.15 V
PC W (2.54)
4 (Ta=25C) VFEC IFEC=6A 1.25 1.5 V 1.0
0.25
0.5
0.15
0.15
0.2
0.2
0.5
C1.5
4.0
1.2
0.5
1 2 3 4 5 6 7 8 9 10
E B C B C B C B C E
a) Part No.
b) Lot No.
(Unit: mm)
IC VCE Characteristics (typ.) VCE (sat) IC Temperature Characteristics (typ.) IC VBE Temperature Characteristics (typ.)
(VCE = 1V)
7 0.75 6
30mA
I C /IB = 100
6 20mA
5
10mA
VCE (sat) (V)
5
0.5 4 Ta = 125C
4 75C
IC (A)
5mA Ta= 55C
IC (A)
25C 3 25C
3 75C 55C
3mA
0.25 125C 2
2
IB = 1mA 1
1
0 0 0
0 1 2 3 4 5 0.01 0.1 1 10 0 0.5 1.0 1.5
VCC = 12V
500 1 IB1 = IB2 = 30mA
hFE
Ta = 125C
0.5
75C
25C tf
100 55C
ton
50 0.1
0.01 0.1 1 10 0 1 2 3
IC (A) Ic (A)
10
s
15
W
5
1m
ith
in
s
10m
fin
3 5 7 9
ite
PT (W)
he
s
at
IC (A)
sin
10
k
1 2
4 6 8
0.5 1 10
5
Witho
Without heatsink ut he
atsin
k
natural air cooling
0.1 0
1 5 10 50 100 0 50 100 150
VCE (V) Ta (C)
107
MOS FET 2SK3710 (under development)
(1.4)
Trench MOS structure Replaces mechanical relays (5) 1.30.2
(0.45)
+0.3
10.5 0.5
9.10.3
2.60.2
+0.2
0.1 0.1
1.20.2
Absolute Maximum Ratings (Ta=25C) Electrical Characteristics
+0.3
3 0.5
(Ta=25C) +0.2
0.86 0.1
(1.5)
Symbol Ratings Unit Ratings
Symbol Test Conditions Unit 0.4
0.1
VDSS 60 V min typ max 2.540.1 2.540.1
(1.3)
(5.4)
10.2 0.3
ID (pulse) 140 A IDSS VDS = 60V, VGS = 0V 100 A
PD 130 W VTH VDS = 10V, ID = 250A 2 4 V
1.40.2
EAS 400 mJ RDS (ON) VGS = 10V, ID = 35A 5.0 6.0 m
1 2 3
Details of the back (S=2/1)
Tch 150 C VSD ISD = 50A 0.9 1.5 V
Tstg 55 to +150 C t rr ISD = 25A, di/dt = 50A/s 110 ns (Unit: mm)
Ciss VDS = 10V 9400 pF
Coss VGS = 10V 1400 pF
Crss f = 1.0MHz 1100 pF
108
MOS FET 2SK3711
5.00.2
13.6
Trench MOS structure Replaces mechanical relays
2.0
2.00.1
1.8
9.6
19.90.3
a 3.20.1
4.0
b
Absolute Maximum Ratings (Ta=25C) Electrical Characteristics (Ta=25C)
Symbol Ratings Unit Ratings
Symbol Test Conditions Unit 2
VDSS 60 V min typ max
20.0 min
4.0 max
VGSS 20 V V(BR) DSS ID = 100A 60 V 3
+0.2
ID 70 A IGSS VGS = +20V 10 A 1.05 0.1
+0.2 0.65 0.1
ID (pulse) 140 A IDSS VDS = 60V, VGS = 0V 100 A 1.4
5.450.1 5.450.1
PD 130 W VTH VDS = 10V, ID = 250A 2 4 V
15.80.2
EAS To be defined mJ RDS (ON) VGS = 10V, ID = 35A 5.0 6.0 m a) Part No.
1. Gate
Tch 150 C VSD ISD = 50A 0.9 1.2 V 2. Drain b) Lot No.
3. Source
Tstg 55 to +150 C t rr ISD = 25A, di/dt = 50A/s 70 ns (1) (2) (3) (Unit: mm)
ID VDS Characteristics (typ.) ID VGS Characteristics (typ.) VDS VGS Characteristics (typ.) Re (yfs) ID Characteristics (typ.)
(Ta = 25C) (VDS = 10V) (VDS = 10V)
80 80 1.0 500
70 70 Tc = 55C
0.8 25C
60 60 100 150C
Re (yfs) (S)
50 10V 50
VDS (V)
0.6
ID (A)
ID (A)
8V Tc = 150C
40 6V 40 100C
30 VGS = 5V 30 50C 0.4
ID = 70A 10
25C
20 20 0C
0.2 35A
40C
10 10
0 0 0 1
0 0.5 1 0 2 4 6 8 0 5 10 15 20 1 10 70
VDS (V) VGS (V) VGS (V) ID (A)
RDS (ON) I D Characteristics (typ.) Ta = 25C RDS (ON) TC Characteristics (typ.) ID = 35A j-c Pw Characteristics
VGS = 10V VGS = 10V
7.0 12.0 10
6.0 10.0
RDS (ON) (m)
j-c (C/W)
5.0
8.0 1
4.0
6.0
3.0
4.0 0.1
2.0
1.0 2.0
0 0 0.01
0 10 20 30 40 50 60 70 60 50 0 50 100 150 0.0001 0.001 0.01 0.1 1 10 100
ID (A) Tc (C) Pw (sec)
Capacitance VDS Characteristics IDR VSD Characteristics Safe Operating Area (single pulse) PD TC Characteristics
(Ta = 25C) (Ta = 25C) (Ta = 25C) (With infinite heatsink)
50000 70 500 140
VGS = 0V
f = 1MHz ID (pulse) max 50
60 0 120
100
Capacitance (pF)
s(
ED 1s
10000 Ciss IT ho
50 M 100
LI t)
1m
N)
s(
(O
PD (W)
IDR (A)
IC (A)
S
1s
40 RD 80
ho
10
10
Tc = 150C
t)
ms
30 25C 60
(1s
1000 55C
ho
Coss
t)
20 1 40
Crss
10 20
100 0 0.1 0
0 10 20 30 40 50 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 0.1 1 10 100 0 50 100 150
VDS (V) VSD (V) VDS (V) Tc (C)
109
MOS FET 2SK3724 (under development)
(1.4)
1.30.2
Trench MOS structure Replaces mechanical relays (5)
(0.45)
+0.3
10.5 0.5
9.10.3
2.60.2
+0.2
0.1 0.1
1.20.2
Absolute Maximum Ratings (Ta=25C) Electrical Characteristics
+0.3
3 0.5
(Ta=25C) +0.2
0.86 0.1
(1.5)
Symbol Ratings Unit Ratings
Symbol Test Conditions Unit 0.4
0.1
VDSS 60 V min typ max 2.540.1 2.540.1
(1.3)
(5.4)
10.20.3
ID (pulse) 160 A IDSS VDS = 60V, VGS = 0V 100 A
PD 60 W VTH VDS = 10V, ID = 1mA 1 2 V
1.40.2
EAS To be defined mJ RDS (ON) VGS = 10V, ID = 40A 4.0 5.0 m
1 2 3
Details of the back (S=2/1)
Tch * 150 C VSD ISD = 50A 0.9 1.5 V
Tstg 55 to +150 C t rr ISD = 25A, di/dt = 50A/s To be defined ns (Unit: mm)
* Contact your sales rep for the details of warranty Ciss VDS = 10V 10600 pF
at Tch = 175C Coss VGS = 10V 1600 pF
Crss f = 1.0MHz 1300 pF
110
MOS FET 2SK3800
Absolute Maximum Ratings (Ta=25C) Electrical Characteristics (Ta=25C) External Dimensions TO220S
Symbol Ratings Unit Ratings
Symbol Test Conditions Unit
VDSS 40 V min typ max 4.440.2
1.30.2
(1.4)
VGSS 20 V V(BR) DSS ID = 100A, VGS = 0V 40 V (5)
(0.45)
ID (pulse)*1 A IDSS VDS = 40V, VGS = 0V 100
10.5 0.5
+0.3
9.10.3
2.60.2
PD 80 (Tc=25C) W VTH VDS = 10V, ID = 1mA 2.0 3.0 4.0 V +0.2
0.1 0.1
EAS*2 400 mJ Re (yfs) VDS = 10V, ID = 35A 30 50 S 1.20.2
+0.3
3 0.5
+0.2
Tch 150 C RDS (ON) VGS = 10V, ID = 35A 5.0 6.0 m 0.86 0.1
(1.5)
Tstg 40 to +150 C Ciss VDS = 10V 5100 pF 0.4
0.1
2.540.1 2.540.1
* 1: PW 100s, duty cycle 1% Coss f = 1.0MHz 1200 pF
* 2: VDD = 20V, L = 1mH, IL = 20A, unclamped, Crss VGS = 0V 860 pF
RG = 50
(1.3)
(5.4)
t d (on) 100 ns 10.20.3
ID = 35A
tr 100 ns
VDD = 20V, RG = 22
1.40.2
t d (off) 300 ns
RL = 0.57, VGS = 10V
tf 130 ns 1 2 3
Details of the back (S=2/1)
VSD ISD = 50A, VGS = 0V 0.9 1.2 V
ISD = 25A, di/dt = 50A/s 110 ns (Unit: mm)
t rr
R th (ch-c) 1.56 C/W
R th (ch-a) 62.5 C/W
ID VDS Characteristics (typ.) ID VGS Characteristics (typ.) VDS VGS Characteristics (typ.) Re (yfs) ID Characteristics (typ.)
(VDS = 10V) (Ta = 25C) (VDS = 10V)
70 70 1.0 500
60 60 Tc = 55C
0.8
100 25C
50 50
10V 150C
Re (yfs) (S)
5.5V 0.6
VDS (V)
40 40
ID (A)
ID (A)
5.0V
30 30 0.4
VGS = 4.5V 10
Ta = 150C ID = 70A
20 20 25C
0.2 35A
55C
10 10
0 0 0 1
0 0.5 1.0 1.5 2.0 0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 0 5 10 15 20 1 10 70
VDS (V) VGS (V) VGS (V) ID (A)
RDS (ON) I D Characteristics (typ.) RDS (ON) TC Characteristics (typ.) j-c t Characteristics (Single pulse) Dynamic I/O Characteristics (typ.)
Ta = 25C ID = 35A
VGS = 10V VGS = 10V (ID = 35A)
7.0 12.0 10 30 15
5.0
j-c (C/W)
8.0 1 20 10
VGS (V)
VDS (V)
4.0 VGS
6.0 VDD = 8V
3.0 12V
14V
4.0 0.1 10 16V 5
2.0 24V
1.0 2.0
0 0 0.01 0 0
0 10 20 30 40 50 60 70 60 50 0 50 100 150 0.00001 0.0001 0.001 0.01 0.1 1 10 100 0 50 100 150
ID (A) Tc (C) t (s) Qg (nC)
Capacitance VDS Characteristics (typ.) IDR VSD Characteristics (typ.) Safe Operating Area (single pulse) PD TC Characteristics
(Ta = 25C) (Ta = 25C)
50000 70 500 90
VGS = 0V PT
=1
f = 1MHz 60 0 80
100 PT s
ED =1
Capacitance (pF)
IT 00 70
10000 50 M PT s
LI PT =1 60
Ciss N) =1 m
(O s
S 0m
PD (W)
IDR (A)
40 RD
IC (A)
10 s 50
30 Ta = 150C 40
1000 Coss 25C
30
20 55C 1
Crss 20
10 10
100 0 0.1 0
0 10 20 30 40 50 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 0.1 1 10 100 0 20 40 60 80 100 120 140 160
VDS (V) VSD (V) VDS (V) Tc (C)
111
MOS FET 2SK3801
Absolute Maximum Ratings (Ta=25C) Electrical Characteristics (Ta=25C) External Dimensions TO-3P
Symbol Ratings Unit Ratings
Symbol Test Conditions Unit 15.60.4
VDSS 40 V min typ max 4.80.2
5.00.2
13.6
VGSS 20 V V(BR) DSS ID = 100A, VGS = 0V
2.0
40 V 2.00.1
1.8
9.6
ID 70 A IGSS VGS = 15V 10 A
ID (pulse)*1 140 A IDSS VDS = 40V, VGS = 0V 100 A
19.90.3
PD 100 (Tc=25C) W VTH VDS = 10V, ID = 1mA 2.0 3.0 4.0 V 3.20.1
4.0
a
EAS*1 400 mJ Re (yfs) VDS = 10V, ID = 35A 30 50 S b
Tch 150 C RDS (ON) VGS = 10V, ID = 35A 5.0 6.0 m
Tstg 40 to +150 C Ciss VDS = 10V 5100 pF
2
20.0 min
* 1: PW 100s, duty cycle 1% Coss f = 1.0MHz 1200 pF
4.0 max
* 2: VDD = 20V, L = 1mH, IL = 20A, unclamped, Crss VGS = 0V 860 pF 3
+0.2
+0.2 0.65 0.1
RG = 50 t d (on) 100 ns 1.05 0.1
ID = 35A
tr 100 ns 1.4
VDD = 20V, RG = 22 5.450.1 5.450.1
t d (off) 300 ns
RL = 0.57, VGS = 10V 15.80.2
tf 130 ns 1. Gate a) Part No.
2. Drain b) Lot No.
VSD ISD = 50A, VGS = 0V 0.9 1.5 V 3. Source
(1) (2) (3) (Unit: mm)
t rr ISD = 25A, di/dt = 50A/s 100 ns
R th (ch-c) 1.25 C/W
R th (ch-a) 35.71 C/W
ID VDS Characteristics (typ.) ID VGS Characteristics (typ.) VDS VGS Characteristics (typ.) Re (yfs) ID Characteristics (typ.)
(VDS = 10V) (Ta = 25C) (VDS = 10V)
70 70 1.0 1000
60 60
0.8 Tc = 55C
50 50 25C
10V 100
Re (yfs) (S)
5.5V 0.6 150C
VDS (V)
ID (A)
ID (A)
40 40
5.0V
30 30 0.4
VGS = 4.5V
Ta = 150C ID = 70A 10
20 20 25C
55C 0.2 35A
10 10
0 0 0 1
0 0.5 1.0 1.5 2.0 0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 0 5 10 15 20 1 10 70
VDS (V) VGS (V) VGS (V) ID (A)
RDS (ON) I D Characteristics (typ.) RDS (ON) TC Characteristics (typ.) j-c Pw Characteristics (Single pulse) Dynamic I/O Characteristics (typ.)
Ta = 25C ID = 35A
VGS = 10V VGS = 10V (ID = 35A)
7.0 10.0 10 30 15
6.0 VDS
8.0
RDS (ON) (m)
5.0
1 20 10
j-c (C/W)
VDS (V)
VGS (V)
6.0 VGS
4.0
VDD = 8V
3.0 12V
4.0 14V
0.1 10 16V 5
2.0 24V
2.0
1.0
0 0 0.01 0 0
0 10 20 30 40 50 60 70 60 50 0 50 100 150 0.00001 0.0001 0.001 0.01 0.1 1 10 100 0 50 100 150
ID (A) Tc (C) Pw (s) Qg (nC)
Capacitance VDS Characteristics (typ.) IDR VSD Characteristics (typ.) Safe Operating Area (single pulse) PD TC Characteristics
(Ta = 25C) (Ta = 25C)
50000 70 500 120
VGS = 0V PT
=1
f = 1MHz 60 0
100 PT s 100
ED =1
Capacitance (pF)
10000 IT 00
50 LI
M PT s
PT =1 80
Ciss N) =1 m
(O
S 0m s
PD (W)
IDR (A)
RD
IC (A)
40 s
10
60
30 Ta = 150C
1000 Coss 25C
40
20 55C 1
Crss
10 20
100 0 0.1 0
0 10 20 30 40 50 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 0.1 1 10 100 0 20 40 60 80 100 120 140 160
VDS (V) VSD (V) VDS (V) Tc (C)
112
MOS FET 2SK3803 (under development)
Absolute Maximum Ratings (Ta=25C) Electrical Characteristics (Ta=25C) External Dimensions TO220S
Symbol Ratings Unit Ratings
Symbol Test Conditions Unit
VDSS 40 V min typ max
VGSS 20 V V(BR) DSS ID = 100A, VGS = 0V 40 V 10.20.3 4.440.2
85 VGS = 15V 10 A
(1.4)
ID A IGSS 1.30.2
ID (pulse)*1 170 A IDSS VDS = 40V, VGS = 0V 100 A
PD 100 (Tc=25C) W VTH VDS = 10V, ID = 1mA 2.0 4.0 V a
1.6
+0.3
10.0 0.5
EAS*2 730 mJ Re (yfs) VDS = 10V, ID = 42A 50 S
8.60.3
b
Tch 150 C RDS (ON) VGS = 10V, ID = 42A 2.1 3.0 m +0.2
(1.5)
0.10.1
Tstg 55 to +150 C Ciss VDS = 10V 10500 pF
Coss f = 1.0MHz 2400 pF 1.270.2
* 1: PW 100s, duty cycle 1%
+0.3
3.0 0.5
* 2: VDD = 20V, L = 1mH, IL = 20A, unclamped, Crss VGS = 0V 1900 pF +0.2
0.86 0.1 0.40.1
RG = 50 t d (on) 90 ns 1.20.2
ID = 42A
tr 230 ns 2.540.5 2.540.5
VDD = 20V, RG = 22
t d (off) 490 ns
VGS = 10V
tf 760 ns a) Part No.
b) Lot No.
VSD ISD = 50A, VGS = 0V 0.85 1.2 V
(Unit: mm)
t rr ISD = 25A, di/dt = 50A/s 90 ns
113
MOS FET 2SK3851
Absolute Maximum Ratings (Ta=25C) Electrical Characteristics (Ta=25C) External Dimensions TO-3P
Symbol Ratings Unit Ratings
Symbol Test Conditions Unit 15.60.4
VDSS 60 V min typ max 4.80.2
5.00.2
13.6
VGSS 20 V V(BR) DSS ID = 100A, VGS = 0V
2.0
60 V 2.00.1
1.8
9.6
ID 85 A IGSS VGS = 20V 10 A
ID (pulse)*1 280 A IDSS VDS = 60V, VGS = 0V 100 A
19.90.3
PD 150 W VTH VDS = 10V, ID = 1mA 2.0 2.5 3.0 V 3.20.1
4.0
a
EAS*2 280 mJ Re (yfs) VDS = 10V, ID = 42A 30 S b
Tch 150 C RDS (ON) VGS = 10V, ID = 42A 4.0 4.7 m
Tstg 55 to +150 C Ciss VDS = 10V 11500 pF
2
20.0 min
Coss f = 1.0MHz 1500 pF
4.0 max
* 1: PW 100s, duty cycle 1%
Crss VGS = 0V 1100 pF 3
* 2: VDD = 20V, L = 1mH, IL = 20A, unclamped +0.2
+0.2 0.65 0.1
t d (on) ID = 42A 60 ns 1.05 0.1
tr VDD 16V 25 ns 1.4
5.450.1 5.450.1
t d (off) RG = 22 370 ns
15.80.2
tf VGS = 10V 65 ns 1. Gate a) Part No.
2. Drain b) Lot No.
VSD ISD = 50A, VGS = 0V 0.87 1.5 V 3. Source
(1) (2) (3) (Unit: mm)
t rr ISD = 50A, di/dt = 100A/S 70 ns
70 80 0.8
100
4.5V
Re (yfs) (S)
60
VDS (V)
60 0.6
ID (A)
ID (A)
50
Ta = 150C 55C
40 25C
40 0.4 25C
VGS = 4.0V 55C ID = 85A 10 150C
30
20 20 0.2 ID = 42A
10
0 0 0 1
0 0.4 0.8 1.2 1.6 2.0 0 1 2 3 4 5 6 0 2 4 6 8 10 12 14 16 18 1 5 10 50 100
VDS (V) VGS (V) VGS (V) ID (A)
6.0
j-c (C/W)
4.0 1
5.0
3.0 4.0
2.0 3.0
0.1
2.0
1.0
1.0
0 0 0.01
0 10 20 30 40 50 60 70 80 90 100 50 0 50 100 150 0.0001 0.001 0.01 0.1 1 10
ID (A) Tc (C) t (s)
120
Ciss 60 Ta = 150C
10000 100
25C
PD (W)
IDR (A)
50 55C
80
40
60
30
40
20
1000 Coss 20
Crss 10
500 0 0
0 10 20 30 40 50 60 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 0 25 50 75 100 125 150
VDS (V) VSD (V) Tc (C)
114
MOS FET FKV460S
Absolute Maximum Ratings (Ta=25C) Electrical Characteristics (Ta=25C) External Dimensions TO220S
Symbol Ratings Unit Ratings
Symbol Test Conditions Unit
VDSS 40 V min typ max
VGSS +20, 10 V V(BR) DSS ID = 100A, VGS = 0V 40 V 10.20.3 4.440.2
60
(1.4)
ID A VGS = +20V +10 1.30.2
IGSS A
ID (pulse)* 180 A VGS = 10V 5
PD 60 (Tc=25C) W IDSS VDS = 40V, VGS = 0V 100 A a
1.6
+0.3
10.0 0.5
Tch 150 C VTH VDS = 10V, ID = 250A 1.3 2.3 V
8.60.3
b
Tstg 55 to +150 C Re (yfs) VDS = 10V, ID = 25A 20.0 S +0.2
(1.5)
0.10.1
* PW 100s, duty 1% RDS (ON) VGS = 10V, ID = 25A 7 9 m
Ciss 2800 pF 1.270.2
VDS = 10V
+0.3
3.0 0.5
+0.2
Coss f = 1.0MHz 1400 pF 0.86 0.1 0.40.1
Crss VGS = 0V 600 pF 1.20.2
ID VDS Characteristics (typ.) ID VGS Characteristics (typ.) VDS VGS Characteristics (typ.) Re (yfs) ID Characteristics
(Ta = 25C) (VDS = 10V) (Ta = 25C) (VDS = 10V)
60 70 1.0 500
3.5V
60
50
10V 0.8 55C
5.0V 50 25C
40 4.0V 100
Re (yfs) (S)
0.6 150C
VDS (V)
40
ID (A)
ID (A)
30 50
30 Ta = 150C ID = 60A
VGS = 3.0V 0.4
25C
20
20 55C
0.2 25A
10 10 10
10A
0 0 0 5
0 1 2 3 4 5 0 1 2 3 4 0 5 10 15 20 1 5 10 60
VDS (V) VGS (V) VGS (V) ID (A)
10 10 Use substrate
8.0 8.0 j-c
j-a
1
6.0 6.0
j-c
Capacitance VDS Characteristics IDR VSD Characteristics Safe Operating Area (single pulse) PD TC Characteristics
(Ta = 25C) (Ta = 25C) (Ta = 25C)
10000 60 200 70
VGS = 0V ID (pulse) max PT
f = 1MHz 10V 100 =1
50 ED m 60
IT s
IM PT
L
Capacitance (pF)
5V =1
N)
Ciss (O 0m 50
40 DS s
R
10
PD (W)
40
IDR (A)
IC (A)
1000 Coss 30
VGS = 10V 30
20 1
Crss 20
10 10
100 0 0.1 0
0 10 20 30 35 0 0.2 0.4 0.6 0.8 1.0 1.2 0.1 1 10 50 0 25 50 75 100 125 150
VDS (V) VSD (V) VDS (V) Tc (C)
115
MOS FET FKV660S
Absolute Maximum Ratings (Ta=25C) Electrical Characteristics ( Ta=25C) External Dimensions TO220S
Symbol Ratings Unit Ratings
Symbol Test Conditions Unit
VDSS 60 V min typ max
VGSS +20, 10 V V(BR)DSS ID=100A, VGS=0V 60 V 10.20.3 4.440.2
ID 60 A VGS =+20V +10
(1.4)
1.30.2
IGSS A
ID(pulse) 180 A VGS =10V 5
PD 60(Tc=25C) W IDSS VDS=60V, VGS=0V 100 A a
1.6
+0.3
10.0 0.5
Tch 150 C VTH VDS=10V, ID=250A 1.0 2.5 V
8.60.3
b
Tstg 40 to +150 C Re (yfs) VDS=10V, ID=25A 20 S +0.2
(1.5)
0.1 0.1
PW 100s, duty 1% RDS(ON) VGS=10V, ID=25A 11 14 m
Ciss VDS=10V 2500 pF 1.270.2
+0.3
3.0 0.5
+0.2
Coss f=1.0MHz 900 pF 0.86 0.1 0.40.1
Crss VGS=0V 150 pF 1.20.2
t d(on) 50 ns 2.540.5 2.540.5
ID=25A
tr VDD=12V 400 ns
t d(off) RL=0.48 400 ns a) Part No.
tf VGS=10V 300 ns b) Lot No.
VSD ISD=50A, VGS=0V 1.0 1.5 V (Unit : mm)
Re (yfs) (S)
120 10 100 150C
VDS (V)
ID (A)
ID (A)
100 0.8
4V ID = 60A
1
80 Ta = 150C 0.6
100C
60 VGS = 3.5V 0.1 50C 10
0.4
25C 25A
40
0.01 0C
55C 0.2
20 10A
0 0.001 0 1
0 2 4 6 8 10 12 0 1 2 3 4 5 6 0 5 10 15 20 1 10 100 200
VDS (V) VGS (V) VGS (V) ID (A)
RDS (ON) ()
0.020 0.020
VGS = 4V Ciss
VGS = 4V
0.015 0.015
VGS = 10V 1000
0.010 VGS = 10V 0.010
140 100
ED PT
120 IT =1
LIM PT m
N) =1 s
IDR (A)
ID (A)
(O 0m
100 10 DS
R s
80
60
1
40
20
0 0.1
0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 0.1 1 10 100
VSD (V) VDS (V)
116
Surface-mount MOS FET Array SDK06
Absolute Maximum Ratings (Ta=25C) Electrical Characteristics (Ta=25C) External Dimensions SMD-16A
Symbol Ratings Unit Ratings
Symbol Test Conditions Unit
VDSS 525 V min typ max
VGSS 20 V V(BR) DSS ID = 1mA, VGS = 0V 47 52 57 V 0.890.15 2.540.25
1.00.3
0.25
3 VGS = 20V 1.0 A
+0.15
ID A IGSS 0.75 0.05
16
A
9
ID (pulse) *1 6 A IDSS VDS = 40V, VGS = 0V 100
a
9.80.3
6.8max
3.00.2
6.30.2
PT W VTH VDS = 10V, ID = 250A 1.0 1.8 2.5 V
8.00.5
3 (Tc=25C, 4 circuits operate)
EAS *2 40 mJ Re (yfs) VDS = 10V, ID = 1.0A 1.0 S b
0 to 0.15
Tch 150 C VGS = 10V, ID = 1.0A 0.2 0.25 +0.15
Pin 1 8
RDS (ON) 0.3 0.05 20.0max
Tstg 55 to +150 C VGS = 4V, ID = 1.0A 0.25 0.3
0.2
*1 PW 100s, duty 1% Ciss VDS = 10V 200 pF 19.56
4.0max
VGS = 0V
3.60.2
Crss 20 pF
t d (on) ID = 1A 2.0 s
1.40.2
tr VDD 12V 7.4 s
RL = 12
t d (off) VGS = 5V 3.3 s a) Part No.
tf RG1 = 50, RG2 = 10k 4.2 s b) Lot No.
RDS (ON) ()
1 75C
ID (A)
ID (A)
25C
3 0.4
2 55C
0.1 Ta = 55C
VGS = 3V 0.2
25C
1
75C
150C
0 0.01 0
0 2 4 6 8 10 12 14 0 1 2 3 4 5 6 0 1 2 3 4 5 6
VGS = 4V 5
0.4 8
typ.
RDS (ON) ()
Re (yfs) (S)
0.3 6 Ta = 150C
IDR (A)
75C
VGS = 10V 25C
0.2 1 Ta = 55C 4
typ. 55C
25C
0.5 150C
0.1 2
0 0.2 0
50 0 50 100 150 0.05 0.1 0.5 1 6 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4
R
m
15 16 13 14 11 12 9 10
s
ID (A)
1
1 3 5 7
0.5
2 4 6 8
0.1
0.5 1 5 10 50
VDS (V)
117
Surface-mount MOS FET Array SDK08
Absolute Maximum Ratings (Ta=25C) Electrical Characteristics (Ta=25C) External Dimensions SMD-16A
Symbol Ratings
Unit Ratings
Symbol Test Conditions Unit
VDSS 50 V min typ max
VGSS 20 V V(BR) DSS ID = 100A, VGS = 0V 50 V 0.890.15 2.540.25
1.00.3
0.25
4.5 VGS = 20V 100
+0.15
ID A IGSS nA 0.75 0.05
16 9
ID (pulse) *1 9 A IDSS VDS = 50V, VGS = 0V 100 A
a
9.80.3
6.8max
3.00.2
6.30.2
V
8.00.5
PT
4 (Tc=25C, 4 circuits operate) W VTH VDS = 10V, ID = 1mA 1.3 1.8 2.3
EAS *2 80 mJ Re (yfs) VDS = 10V, ID = 4.0A 5.0 9.0 13.0 S b
0 to 0.15
Tch 150 C VGS = 10V, ID = 4.0A 0.07 0.08 +0.15
Pin 1 8
RDS (ON) 0.3 0.05 20.0max
Tstg 55 to +150 C VGS = 4V, ID = 4.0A 0.09 0.1
0.2
*1 PW 100s, duty 1% Ciss VDS = 10V 700 pF 19.56
4.0max
VGS = 0V
3.60.2
Crss 90 pF
t d (on) ID = 4A 50 ns
1.40.2
tr VDD 12V 80 ns
RL = 3
t d (off) VGS = 5V 60 ns a) Part No.
tf RG = 50 40 ns b) Lot No.
(Unit: mm)
VSD ISD = 6A, VGS = 0V 1.0 1.5 V
ID VDS Characteristics (typ.) ID VGS Characteristics VDS VGS Characteristics (typ.) Re (yfs) ID Characteristics
(Ta = 25C) (VDS = 10V) (ID = 4A) (VDS = 10V)
18 20 1.4 100
VGS = 4V 10
16 1.2 Ta = 150C
75C Ta = 150C
14
1 1.0 25C 25C
12 10
Re (yfs) (S)
0C 55C
VGS = 10V
VDS (V)
0.8
ID (A)
ID (A)
10 55C
8 0.1
Ta = 150C 0.6
6 VGS = 3V 75C 1
25C 0.4
4 0.01
0C
55C 0.2
2
0 0.001 0 0.1
0 3 6 9 12 15 0 1 2 3 4 5 0 2 4 6 8 10 0.05 0.1 1 10
VDS (V) VGS (V) VGS (V) ID (A)
RDS (ON) I D Characteristics RDS (ON) I D Characteristics RDS (ON) TC Characteristics (typ.) S/W Time W ID Characteristics
(VGS = 10V) (VGS = 4V) (ID = 4A) (single pulse) (Ta = 25C)
0.20 0.20 0.20 500
Ta = 150C VDD = 12V constant
75C RGS = 50
25C Ta = 150C VGS = 5V
S/W Time (ns)
RDS (ON) ()
RDS (ON) ()
55C 100 tr
75C VGS = 4V t d (off)
0.10 0.10 0.10 t d (on)
25C tf
0C
VGS = 10V
0.05 0.05 55C 0.05
10
0 0 0 5
0 2 4 6 8 10 12 0 2 4 6 8 10 12 60 50 0 50 100 150 0.1 0.5 1 5 10
ID (A) ID (A) Tc (C) ID (A)
1 circuits operate
Ta = 150C
4 75C 2 1 3 5 7
100 Coss 25C
3 0C
55C 2 4 6 8
Crss 2 1
1
10
5 0 0
0.1 1 10 100 0 0.3 0.6 0.9 1.2 1.5 0 50 100 150
VDS (V) VSD (V) Ta (C)
118
Surface-mount MOS FET Array SDK09
Absolute Maximum Ratings (Ta=25C) Electrical Characteristics (Ta=25C) External Dimensions SMD-16A
Symbol Ratings Unit Ratings
Symbol Test Conditions Unit
VDSS 120 V min typ max
VGSS 20 V V(BR) DSS ID=100A, VGS=0V 120 V 0.890.15 2.540.25
1.00.3
0.25 +0.15
ID 6 A IGSS VGS=20V 5 A 0.75 0.05
16 9
ID (pulse) *1 10 A IDSS VDS=120V, VGS=0V 100 A
a
9.80.3
6.8max
3.00.2
6.30.2
V
8.00.5
PT 3 (Tc=25C, 4 circuits operate) W VTH VDS=10V, ID=250A 1.0 2.0
EAS *2 80 mJ Re (yfs) VDS=10V, ID=4A 5.0 S b
0 to 0.15
Tch 150 C VGS=10V, ID=4A 0.15 0.2 +0.15
RDS (ON) 0.3 0.05 Pin 1 20.0max 8
Tstg 55 to +150 C VGS=4V, ID=4A 0.2 0.25
0.2
*1 PW 100s, duty 1% Ciss VDS=10V 400 pF 19.56
4.0max
VGS=0V
3.60.2
Crss 30 pF
t d (on) ID=4A 100 ns
1.40.2
tr VDD=12V 300 ns
RL=3
t d (off) VGS=5V 250 ns a) Part No.
tf RG=50 200 ns b) Lot No.
(Unit: mm)
VSD ISD=6A, VGS=0V 1.0 1.5 V
RDS (ON) ()
6
ID (A)
ID (A)
8 0.15
Ta=55C VGS=10V
4 25C
75C 0.10
4 150C
2
0.05
0 0 0
0 1 2 3 4 5 6 0 1.0 2.0 3.0 4.0 0 2 4 6 8 10
VDS (V) VGS (V) ID (A)
5
Re (yfs) (S)
IDR (A)
25C
3 55C
0.20 VGS=10V
Ta=55C
1
25C 2
0.5 75C
0.10
150C 1
0 0.1 0
50 0 50 100 150 0.05 0.1 0.5 1 5 10 0 0.2 0.4 0.6 0.8 1.0 1.2
Tc (C) ID (A) VSD (V)
Capacitance VDS Characteristics Safe Operating Area (single pulse) Equivalent Circuit Diagram
(Ta = 25C)
1000 20
ID (pulse) max
500 10 10
Ciss 0
ID (DC) max s
5 1m
Capacitance (pF)
10 s 15 16 13 14 11 12 9 10
VGS =0V RDS (on) LIMITED m
s
f=1MHz 10
ID (A)
0m
100 s
Coss 1
1 3 5 7
50
0.5
2 4 6 8
Crss
10 0.1
0 10 20 30 40 50 1 5 10 50 100 200
119
MOS FET Array SLA5027
Absolute Maximum Ratings (Ta=25C) Electrical Characteristics (Ta=25C) External Dimensions SLA 12pin (LF800)
Symbol Ratings Unit Ratings
Symbol Test Conditions Unit
VDSS 60 V min typ max
VGSS 20 V V(BR) DSS ID = 100A, VGS = 0V 60 V 31.00.2 Ellipse 3.20.15 3.8
3.20.15 24.40.2 4.80.2
ID 12 A IGSS VGS = 20V 100 A 16.40.2 1.70.1
16.00.2
13.00.2
PT
8.5max
12.0
9.90.2
60 (Tc=25C,4 circuits operate) W Re (yfs) VDS = 10V, ID = 8A 6.0 S a
b
EAS*2 250 mJ RDS (ON) VGS = 4V, ID = 8A 0.07 0.08
9.5min (10.4)
2.08 C/W Ciss 1100 pF
2.7
j-c VDS = 10V Pin 1 12
VISO (Fin to lead terminal) AC1000 Vrms Coss f = 1.0MHz 500 pF 0.85
+0.2
2.20.7
0.1 +0.2
0.55
1.20.15
0.1
VDS = 10V
10
8
4V VGS = 4V
5V
10V 8
RDS (on) ()
6
ID (A)
ID (A)
0 0 0
0 1 2 3 4 5 6 0 1 2 3 4 0.1 1 10 20
VDS (V) VGS (V) ID (A)
Re (yfs) (S)
10
IDR (A)
VGS = 10V
1
0.06
5
0.5
0.02 2 0.1
50 0 50 100 150 0.4 1 5 10 20 0 0.4 0.8 1.2
Capacitance VDS Characteristics Safe Operating Area (single pulse) Equivalent Circuit Diagram
(Ta = 25C)
2000 50
ID (pulse) max
VGS = 0V
ED
ne
f = 1MHz
0.
V li
IT
M
=4
5m
1000
LI
GS
Ciss
n)
dV
s
1m
(o
me
S
su
D
Capacitance (pF)
10
s
R
As
10 ID (DC) max
s
3 6 7 10
500
10
0m
Coss
ID (A)
5
1 4 8 11
2 5 9 12
100 Crss
1
50 0.5
1 5 10 50 0.5 1 5 10 50 100
VDS (V) VDS (V)
120
MOS FET Array SLA5098 (under development)
Absolute Maximum Ratings (Ta=25C) Electrical Characteristics (Ta=25C) External Dimensions STA4 (LF412)
Symbol Ratings Unit Ratings
Symbol Test Conditions Unit
VDSS 40 V min typ max
VGSS 20 V V(BR) DSS ID = 100A, VGS = 0V 40 V 31.00.2 Ellipse 3.20.1 3.8
3.20.1 24.40.2 4.80.2
ID 20 A IGSS VGS = 15V 10 A 16.40.2 1.70.1
16.00.2
13.00.2
9.90.2
8.5max
IAS To be defined A Re (yfs) VDS = 10V, ID = 10A 10 S a
b
5( Without heatsink, Ta=25C,
) RDS (ON) VGS = 10V, ID = 10A 17 m
9.5min (10.4)
All circuits operate W
PT Ciss 1450 pF
2.7
VDS = 10V
Tc=25C,
90 ( All circuits operate ) W Pin 1 15
Coss f = 1.0MHz 420 pF +0.2
+0.2
0.65 0.1 0.55 0.1 2.20.7
1.20.15
Tch 150 C Crss VGS = 0V 260 pF
+0.2
1.15 0.1
14P2.030.4 = 28.420.8
Tstg 55 to +150 C t d (on) ID = 10A 40 ns
* PW 100s, duty 1% tr VDD = 14V 40 ns 31.5 max
RL = 1.4
t d (off) VGS = 10V 200 ns
tf RG = 50 100 ns 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 a) Part No.
b) Lot No.
VSD ISD = 10A, VGS = 0V 0.85 1.2 V
(Unit: mm)
ISD = 10A, VGS = 0V
t rr 45 ns
di/dt = 100A/s
4 9 14
5 10 15
3 8 13
2 7 12
1 6 11
121
MOS FET Array SMA5113
Absolute Maximum Ratings (Ta=25C) Electrical Characteristics (Ta=25C) External Dimensions SMA (LF1000)
Symbol Ratings Unit Ratings
Symbol Test Conditions Unit
VDSS 450 V min typ max
4.00.2
VGSS 30 V V(BR) DSS ID = 100A, VGS = 0V 450 V 31.00.2
2.50.2
ID 7 A IGSS VGS = 30V 100 nA
ID (pulse) *1 28 A IDSS VDS = 450V, VGS = 0V 100 A 30
10.20.2
b
4 (Ta=25C, All circuits operate, No Fin) W VTH VDS = 10V, ID = 1mA 2.0 4.0 V a
2.4
PT
35 (Tc=25C, All circuits operate, Fin) W Re (yfs) VDS = 20V, ID = 3.5A 3.5 5.0 S 1.210.15
(10.4)
EAS *2 130 mJ RDS (ON) VGS = 10V, ID = 3.5A 0.84 1.1 1.460.15
5 5
1.0
RDS (ON) ()
4 4
ID (A)
ID (A)
5V
3 3
0.5
2 VGS = 4.5V 2 Ta = 55C
25C
1 1 150C
0 0 0
0 5 10 15 20 0 2 4 6 8 10 0 1 2 3 4 5 6 7
VDS (V) VGS (V) ID (A)
5
RDS (ON) ()
Re (yfs) (S)
1.5
4
IDR (A)
Ta = 55C 3
1.0 10
25C
150C
2
5
0.5
1
0 2 0
50 0 50 100 150 0.05 0.1 0.5 1 7 0 0.2 0.4 0.6 0.8 1.0
Tc (C) ID (A) VSD (V)
Capacitance VDS Characteristics Safe Operating Area (single pulse) Equivalent Circuit Diagram
(Ta = 25C)
1000 50
Ciss ID (pulse) max
500 10
0
10 ID (DC) max ED s
IT
Capacitance (pF)
VGS = 0V IM 1m
n )L s
f = 1MHz 5 (o
RD
S 10 3 6 7 10
m
s
ID (A)
10
0m
s 1 4 8 11
100 1
Coss
0.5
50 2 5 9 12
Crss
0.1
20 0.05
0 10 20 30 40 50 3 5 10 50 100 500
VDS (V) VDS (V)
122
MOS FET Array STA508A
Absolute Maximum Ratings (Ta=25C) Electrical Characteristics (Ta=25C) External Dimensions STA4 (LF412)
Symbol Ratings Unit Ratings
Symbol Test Conditions Unit
VDSS 120 V min typ max 25.25
0.2
0.2
0.2
0.2
9.0
10 A a
11.3
ID (pulse)*1 VDS = 120V, VGS = 0V 100
2.3
A IDSS
4 (Ta = 25C) W VTH VDS = 10V, ID = 250A 1.0 2.0 V
0.5
PT
3.5
20 (Tc = 25C) W Re (yfs) VDS = 10V, ID = 4.0A 5.0 S
(2.54)
0.25 0.15
EAS *2 80 mJ VGS = 10V, ID = 4.0A 0.15 0.2 1.0 0.5
0.3 0.3
RDS (ON) 0 0
Tch 150 C VGS = 4V, ID = 4.0A 0.2 0.25 9 2.54=22.86
0.05
0.15
0.2
0.2
*1 PW 100s, duty 1% Coss f = 1.0MHz 130 pF C1.5
0.5
4.0
1.2
0.5
*2 VDD = 12V, L = 10mH, unclamped, RG = 50 Crss VGS = 0V 30 pF
t d (on) ID = 4A 100 ns 1 2 3 4 5 6 7 8 9 10
RL = 3
t d (off) VGS = 5V 250 ns a) Part No.
tf RG = 50 200 ns b) Lot No.
RDS (ON) ()
6
ID (A)
ID (A)
8 0.15
Ta = 55C VGS = 10V
4 25C
75C 0.10
4 150C
2
0.05
0 0 0
0 1 2 3 4 5 6 0 1.0 2.0 3.0 4.0 0 2 4 6 8 10
VDS (V) VGS (V) ID (A)
5
Re (yfs) (S)
IDR (A)
25C
3 55C
0.20 VGS = 10V
Ta = 55C
1
25C 2
0.5 75C
0.10
150C 1
0 0.1 0
50 0 50 100 150 0.05 0.1 0.5 1 5 10 0 0.2 0.4 0.6 0.8 1.0 1.2
Tc (C) ID (A) VSD (V)
Capacitance VDS Characteristics Safe Operating Area (single pulse) Equivalent Circuit Diagram
(Ta = 25C)
1000 20
ID (pulse) max
500 10 10
Ciss 0
ID (DC) max s
5 1m
Capacitance (pF)
10 s
VGS = 0V RDS (on) LIMITED m
s 3 5 7 9
f = 1MHz 10
ID (A)
0m
100 s
Coss 1 2 4 6 8
50
0.5 1 10
Crss
10 0.1
0 10 20 30 40 50 1 5 10 50 100 200
VDS (V) VDS (V)
123
MOS FET Array STA509A
Absolute Maximum Ratings (Ta=25C) Electrical Characteristics (Ta=25C) External Dimensions STA
Symbol Ratings Unit Ratings
Symbol Test Conditions Unit
VDSS 525 V min typ max 25.25
0.2
0.2
0.2
0.2
9.0
6 A a
11.3
VDS = 40V, VGS = 0V
2.3
ID (pulse) *1 A IDSS 100
4 (Ta = 25C) W VTH VDS = 10V, ID = 250A 1.0 2.5 V
0.5
PT
3.5
20 (Tc = 25C) W Re (yfs) VDS = 10V, ID = 1.0A 1.0 S
(2.54)
0.25 0.15
EAS *2 40 mJ VGS = 10V, ID = 1.0A 0.2 0.25 1.0 0.5
0
0.3 0.3
RDS (ON) 0
Tch 150 C VGS = 4V, ID = 1.0A 0.25 0.3 9 2.54=22.86
0.05
0.15
0.2
0.2
*1 PW 100s, duty 1% Coss f = 1.0MHz 120 pF C1.5
0.5
4.0
1.2
0.5
*2 VDD = 12V, L = 10mH, unclamped, RG = 10 Crss VGS = 0V 20 pF
t d (on) ID = 1A 2.0 s 1 2 3 4 5 6 7 8 9 10
S G D G D G D G D S
tr VDD 12V 7.4 s
RL = 12
t d (off) VGS = 5V 3.3 s a) Part No.
tf RG1 = 50, RG2 = 10 4.2 s b) Lot No.
(Unit: mm)
VSD ISD = 6A, VGS = 0V 1.0 1.5 V
RDS (ON) ()
1 75C
ID (A)
ID (A)
25C
3 0.4
2 55C
0.1 Ta = 55C
VGS = 3V 0.2
25C
1
75C
150C
0 0.01 0
0 2 4 6 8 10 12 14 0 1 2 3 4 5 6 0 1 2 3 4 5 6
VGS = 4V 5
0.4 8
typ.
RDS (ON) ()
Re (yfs) (S)
0.3 6 Ta = 150C
IDR (A)
75C
VGS = 10V 25C
0.2 1 Ta = 55C 4
typ. 55C
25C
0.5 150C
0.1 2
0 0.2 0
50 0 50 100 150 0.05 0.1 0.5 1 6 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4
R
m
3 5 7 9
s
ID (A)
1
2 4 6 8
0.5
1 10
0.1
0.5 1 5 10 50
VDS (V)
124
Thyristor with built-in reverse diode for HID lamp ignition TFC561D
(1.4)
10.20.3 1.30.2
Repetitive peak surge on-state current: ITRM=430A
Critical rate-of-rise of on-state current: di/dt=1200A/s
Gate trigger current: I GT=20mA max
10.0 0.5
+0.3
11.30.5
8.60.3
With built-in reverse diode
1.20.2 2.590.2
1.270.2
0.5
+0.2
0.86 0.1
11.0
Absolute Maximum Ratings 0.760.1
G2
Gate trigger voltage VGT 1.5 V VD=6V, RL=10 Current waveform (1cycle)
Gate trigger current IGT 20 mA VD=6V, RL=10 (Ta=25C)
2s/div
125
Thyristor with built-in reverse diode for HID lamp ignition TFC562D
(1.4)
Repetitive peak surge on-state current: ITRM=600A
Critical rate-of-rise of on-state current: di/dt=1600A/s
Gate trigger current: I GT=20mA max
(0.45)
a
+0.3
10.5 0.5
With built-in reverse diode
9.10.3
b
2.60.2
(Root dimension)
(2.69) (1.8)
+0.2
11.00.5
Tj = 40 to +125C,
Repetitive peak off-state voltage VDRM 600 V 0.760.1
RGK = 1k
Repetitive surge peak Ta = 100C, VD 430V, 2.540.1 2.540.1 0.40.1
ITRM 600 A WP = 1.05s, IG = 70mA,
on-state current (Root dimension) (Root dimension)
dig/dt = 0.5A/s,
Critical rate-of-rise of on-state current di/dt 1600 A/s 100kcycle*,
See the examples of current waveforms 10.20.3
Ratings
Parameter Symbol Unit Conditions
min typ max
On-state voltage VTM 1.4 V IT = 10A
Off-state current (1) IDRM (1) 10 A VD = VDRM, RGK = 1k, Tj = 25C H: 2s/div
Off-state current (2) IDRM (2) 1 mA VD = VDRM, RGK = 1k, Tj = 125C * A single cycle operation consists of a continuous impression of 50
rounds with period T = 10ms followed by a rest time for the junction
Thermal resistance Rth 4.0 C/W Junction to case, With infinite heatsink temperature of the element to cool down to 100C (= Ta). Repeat
this cycle operation.
Diode forward voltage VF 1.4 V IF = 10A
126
Rectifier Diodes for Alternators
Normal Type
Absolute maximum ratings Electrical Characteristics
Tj Tstg VF IR Fig.
Part No. VRM IF (AV) IFSM VZ
(V) Condition (mA) Condition No.
(V) (A) (A) (C) max IF (A) max (V) IZ (mA)
SG-9CNS
200 20 200 40 to +150 1.10 20 0.25 1
SG-9CNR
SG-9LCNS
200 30 300 40 to +150 1.10 30 0.25
SG-9LCNR
2
SG-9LLCNS
200 35 350 40 to +150 1.10 35 0.25
SG-9LLCNR
SG-10LS
200 30 300 40 to +150 1.2 100 0.25
SG-10LR
SG-10LXS
150 35 350 40 to +150 1.05 100 0.25
SG-10LXR
3
SG-10LLS
200 40 400 40 to +150 1.05 100 0.25
SG-10LLR
SG-10LLXS
150 45 450 40 to +150 1.0 100 0.25
SG-10LLXR
Zener Type
Absolute maximum ratings Electrical Characteristics
Tj Tstg VF IR Fig.
Part No. VRM IF (AV) IFSM VZ
(V) Condition (mA) Condition No.
(V) (A) (A) (C) max IF (A) max (V) IZ (mA)
SG-9CZS
17 20 200 40 to +200 1.10 20 0.05 233 10 1
SG-9CZR
SG-9LLCZS
17 35 350 40 to +200 1.10 35 0.05 233 10 2
SG-9LLCZR
SG-10LZ23S
17 30 300 40 to +150 1.2 100 0.05 233 10
SG-10LZ23R
3
SG-10LLZ23S
17 40 400 40 to +150 1.05 100 0.05 233 10
SG-10LLZ23R
SG-14LXZS
16 35 350 40 to +200 1.15 100 0.05 223 100 4
SG-14LXZR
R: 23.01.0
S: 19.01.0
1.5 1.5
3.10.1 3.10.1
(R0.5)
1
Polarity
50.4
50.4
Polarity
1.2
1.2
7.00.2 8.40.2
8.40.2 S type R type 9.50.2 S type R type
12.84
5.0 11.5
Fig. 3 2 Fig. 4 1.26
10.0
10.7
13.5
2.0
(4)
(1.5)
24.0
R : 28.5
S : 20.5
(2)
2.5
R1.2
0.4
1.4 1.0 Polarity Polarity
(5.8)
(45 (30
)
3.6
)
10max
8max
9.0
127
High-voltage Diodes for Igniters
0.5
0.5
C0.5
C0.5
27min 27min 27min 6.5 27min
50.2
128
Power Zener Diode
(Ta=25C)
2.60.2
2.05 0.2
0.05
0.050.05
2.150.2
+0.1
Fig. 3 Fig. 3
1.3 0.05
C2
8.50.5
Cathode marking 50.3
100.3
20.3
10.0 0.02
56.0 0.7
(9.75)
100.3
13.50.3
10.0 0.2
15.50.5
2.00.5
2.70.3
7.20.5 30.5
129
General-purpose Diodes
Rectifier Diodes
Surface-mount
I FSM IR I R (H)
VRM I F (AV) (A) Tj Tstg VF (A) (mA) Rth (j-l) Weight
Part No. Peak value Package
(V) (A) of 50 Hz (C) (C) (V) Condition VR=VRM VR=VRM Condition (C/W) (g)
half-wave max I F (A) Ta (C)
signal max max
SFPM-52 0.9 30 1.0 1.0 10 50 100 20 1 0.072
200
SFPM-62 1.0 45 0.98 1.0 10 50 100 20 1 0.072
40 to +150
SFPM-54 0.9 30 1.0 1.0 10 50 100 20 1 0.072
400
SFPM-64 1.0 45 0.98 1.0 10 50 100 20 1 0.072
* under development
1.37
2.9
2.6 0.2
5.0
a
0.7
5.5 0.4
b
1.2max
c 4.9
2.05 0.2
0.05
2.5 0.4
0 to 0.25
b) Polarity
1.35 0.4 2.0min 1.35 0.4 1.1 0.2 2.29 0.5 2.29 0.5 c) Lot No.
0.55 0.1
+0.4
5.1 0.1 1.5 0.2 (Common with heatsink)
1.5 max
N.C Cathode Anode
130
General-purpose Diodes - Taping Specifications
Taping Specifications
Taping Packaging
Name Taping Dimensions (mm) Packaging Dimensions (mm) and Markings Quantity
1.75 0.1
0.2 0.1 +0.1
4.5 4.0 1.5 0 Marking of Part No.,
Lot No., quantity, etc.
2.6 0.2
5.5 0.05
2.0 0.5
0.05 0.05
12.0 0.3
+ 0.1
V
2.05 0.2
13 0.5
5.5
1,800 pcs.
65
1.35 0.4 2.0min 1.35 0.4 1.1 0.2 per reel
+0.4
5.1 0.1 1.5 0.2 210.8
Pull out direction 4.0 0.1 2.0 R1.0
2.6
A suffix "V" is (1) The right side of the tape is the cathode viewing in the unfold direction. 3.1 178 2 141.5 2.0 0.5
added to Part (2) The product is inserted into the case with the installed electrode on the lower side.
No. for tape (3) A leader tape 150 to 200mm long is provided on the unfolding edge.
(4) A space of at least 10 pitches equivalent is provided on either end of the tape.
packaging. (5) Taping with reversed diode polarity is available on request (taping name VL).
Taping Packaging
Name Taping Dimensions (mm) Packaging Dimensions (mm) and Markings Quantity
Part No.
Materials
Pull out direction Quantity Disc: both-face white
corrugated cardboard
VL
Taping name Lot No.
(type) Core: foamed styrol
3,000 pcs.
A suffix "VL" is
35 1 3 8 1 3 8
per reel
1.75 0.1
packaging.
11.50.1
(Bottom dimensions)
10 B
(Cover tape)
240.3
21.50.1
14.40.1
22
1001
3302
130.2
80
60
40
20
120
25.51
29.51
0.40.1
10.80.1 (Seal part)
2.5
VR 90.5
3,000 pcs.
per reel
7 0.5
20.5
210.8
A suffix "VR" is
added to Part
5
0
.5
packaging. 130.5
Taping Packaging
Name Taping Dimensions (mm) Packaging Dimensions (mm) and Markings Quantity
Axial taping
50.5
Part No.
1.2 max
V1 Lot No.
Quantity 5,000 pcs.
29 1.5 per reel
75 1.5
A suffix "V1" is
1
1.0 max
25
added to Part
No. for tape
6 1.0 58 1 6 1.0 3402
packaging.
131
General-purpose Diodes - Taping Specifications
Taping Packaging
Name Taping Dimensions (mm) Packaging Dimensions (mm) and Markings Quantity
VL 750 pcs.
A suffix "VL" is
35 1 3 B 1 3 B
per reel
1.750.1
added to Part 1.500.1 4.000.1
2.000.1 5.640.1
No. for tape
10
packaging.
4
11.500.1
10 B
+0.3
24.000.1
16.000.1
22
1001
3302
130.2
80
60
40
20
120
25.51
29.51
4
Pull out direction 1.500.25
R135
R TYPE L TYPE 16.000.1
0.400.05
VR 8
10.800.1
8 90.5
750 pcs.
per reel
7 0.5
20.5
210.8
A suffix "VR" is
added to Part The label showing the
5
0.
product name, quantity
5
No. for tape
13
0
and production lot is
.2
packaging. 130.5
attached to the reel.
132
3 LEDs
133
General-purpose LEDs
Fig. No.
Contact
mount
Outline Emitting color Part No. Lens color VF IV Peak wavelength Dominant wavelength
(V) (mcd) Condition p (nm) p (nm) Chip
IF (mA) material
typ max typ typ typ
SEL1110R Diffused red 2.8
Deep red SEL1110W Diffused white 2.0 2.5 2.8 5 700 625 GaP
SEL1110S Tinted red 4.5
SEL1610W Diffused white 250
High-intensity red 1.75 2.2 20 660 642 GaA As
SEL1610C Clear 300
SEL1210R Diffused red 26
Red 1.9 2.5 20 630 620 GaAsP
SEL1210S Tinted red 75
SEL1810D Diffused orange 18
Amber 1.9 2.5 10 610 605 GaAsP 1
SEL1810A Tinted orange 37
SEL1910D Diffused orange 14
Orange 1.9 2.5 10 587 590 GaAsP
SEL1910A Tinted orange 25
SEL1710Y Diffused yellow 22
Yellow 2.0 2.5 10 570 571 GaP
SEL1710K Tinted yellow 65
SEL1410G Diffused green 32
Green 2.0 2.5 20 560 567 GaP
SEL1410E Tinted green 84
Pure green SEL1510C Clear 2.0 2.5 50 20 555 559 GaP
SEL1210RM Diffused red 36
Red 1.9 2.5 20 630 620 GaAsP
SEL1210SM Tinted red 75
SEL1810DM Diffused orange 18
Amber 1.9 2.5 10 610 605 GaAsP
SEL1810AM Tinted orange 37
SEL1910DM Diffused orange 19
Orange 1.9 2.5 10 587 590 GaAsP 2
5 Round SEL1910AM Tinted orange 34
Yellow SEL1710KM Tinted yellow 2.0 2.5 65 10 570 571 GaP
SEL1410GM Diffused green 30
Green 2.0 2.5 20 560 567 GaP
SEL1410EM Tinted green 84
Pure green SEL1510CM Clear 2.0 2.5 50 20 555 559 GaP
Ultra high-intensity red SELU1210CXM Clear 2.0 2.5 280 20 635 625 A GaInP
Ultra high-intensity orange SELU1910CXM-S Clear 2.0 2.5 450 20 591 589 A GaInP
Ultra high-intensity pure green SELU1D10CXM Clear 3.3 4.0 2000 20 525 530 InGaN 3
Ultra high-intensity blue SELU1E10CXM Clear 3.3 4.0 600 20 468 470 InGaN
Ultra high-intensity blue SELS1E10CXM-M Clear 3.7 4.2 1000 20 468 470 InGaN
Ultra high-intensity red SELU1250CM Clear 2.0 2.5 900 20 635 625 A GaInP
SEL1250SM Tinted red 75
Red 1.9 2.5 20 630 620 GaAsP
SEL1250RM Diffused red 48
SEL1850AM Tinted orange 90
Amber 1.9 2.5 20 610 605 GaAsP
SEL1850DM Diffused orange 60
Orange SEL1950KM Tinted orange 1.9 2.5 96 20 587 590 GaAsP 4
SEL1450EKM Tinted green 190
Green 2.0 2.5 20 560 567 GaP
SEL1450GM-YG Diffused green 120
Pure green SEL1550CM Clear 2.0 2.5 72 20 555 559 GaP
Ultra high-intensity pure green SELU1D50CM Clear 3.3 4.0 6000 20 525 530 InGaN
Ultra high-intensity blue SELU1E50CM Clear 3.3 4.0 1850 20 468 470 InGaN
High-intensity red SEL1615C Clear 1.75 2.2 170 20 660 642 GaA As 5
4.65.6 Ultra high-intensity red SELU1253CMKT Clear 2.0 2.5 200 20 635 625 A GaInP
6
Egg-shaped Green SEL1453CEMKT Tinted green 2.0 2.5 140 20 560 567 GaP
SEL4110S Tinted red 2.4
Deep red 2.0 2.5 5 700 625 GaP
SEL4110R Diffused red 1.7
SEL4210S Tinted red 30
Red 1.9 2.5 20 630 620 GaAsP
SEL4210R Diffused red 17
SEL4810A Tinted orange 20
4 Round Amber 1.9 2.5 10 610 605 GaAsP 7
SEL4810D Diffused orange 15
SEL4910A Tinted orange 26
Orange 1.9 2.5 10 587 590 GaAsP
SEL4910D Diffused orange 16
SEL4710K Tinted yellow 36
Yellow 2.0 2.5 10 570 571 GaP
SEL4710Y Diffused yellow 14
134
General-purpose LEDs
Fig. No.
Contact
mount
Outline Emitting color Part No. Lens color VF (V) IV Peak wavelength Dominant wavelength
(mcd) Condition p (nm) p (nm) Chip
material
typ max typ IF (mA) typ typ
SEL4410E Tinted green 87
Green 2.0 2.5 20 560 567 GaP
SEL4410G Diffused green 34
7
Ultra high-intensity green SELU4410CKT-S Clear 2.1 2.5 170 20 560 562 A GaInP
Pure green SEL4510C Clear 2.0 2.5 45 20 555 559 GaP
SEL4114S Tinted red 3.8
Deep red 2.0 2.5 10 700 625 GaP
SEL4114R Diffused red 2.8
SEL4214S Tinted red 40
Red 1.9 2.5 20 630 620 GaAsP
SEL4214R Diffused red 24
4 Round SEL4814A Tinted orange 20
Amber 1.9 2.5 10 610 605 GaAsP
SEL4814D Diffused orange 15
SEL4914A Tinted orange 26 8
Orange 1.9 2.5 10 587 590 GaAsP
SEL4914D Diffused orange 11
SEL4714K Tinted yellow 38
Yellow 2.0 2.5 10 570 571 GaP
SEL4714Y Diffused yellow 27
SEL4414E Tinted green 69
Green 2.0 2.5 20 560 567 GaP
SEL4414G Diffused green 48
Pure green SEL4514C Clear 2.0 2.5 26 20 555 559 GaP
SEL6110S Tinted red 3.9
Deep red 2.0 2.5 10 700 625 GaP
SEL6110R Diffused red 2.6
SEL6210S Tinted red 41
Red 1.9 2.5 20 630 620 GaAsP
SEL6210R Diffused red 18
SEL6810A Tinted orange 22
Amber 1.9 2.5 10 610 605 GaAsP
SEL6810D Diffused orange 9.6
Ultra high-intensity orange SELU6910C-S Clear 2.0 2.5 550 20 591 589 A GaInP
SEL6910A Tinted orange 22
Orange 1.9 2.5 10 587 590 GaAsP 9
SEL6910D Diffused orange 11
SEL6710K Tinted yellow 37
Yellow 2.0 2.5 10 570 571 GaP
SEL6710Y Diffused yellow 11
SEL6410E Tinted green 90
Green 2.0 2.5 20 560 567 GaP
SEL6410G Diffused green 30
SEL6510C Clear 42
Pure green 2.0 2.5 20 555 559 GaP
SEL6510G Diffused green 9.6
Blue SEL6E10C Clear 4.0 4.8 60 20 430 466 GaN
Ultra high-intensity SELU6614C-S Clear 150
2.0 2.5 20 650 639 A GaInP
deep red SELU6614W-S Diffused white 90
Ultra high-intensity red SELU6214C Clear 2.0 2.5 180 20 635 625 A GaInP
Red SEL6214S Tinted red 1.9 2.5 18 20 630 620 GaAsP
Amber SEL6814A Tinted orange 1.9 2.5 9.0 10 610 605 GaAsP
Ultra high-intensity light amber SELS6B14C Clear 2. 2.5 120 20 600 596 A GaInP
Ultra high-intensity orange SELU6914C-S Clear 2.0 2.5 180 20 591 589 A GaInP
SEL6914A Tinted orange 8.0
Orange 1.9 2.5 10 587 590 GaAsP
SEL6914W Diffused white 5.0
3 Round 10
Ultra high-intensity yellow SELU6714C Clear 2.1 2.5 60 20 572 571 A GaInP
SEL6714K Tinted yellow 66
Yellow 2.0 2.5 20 570 571 GaP
SEL6714W Diffused white 30
Green SEL6414E Tinted green 2.0 2.5 42 20 560 567 GaP
Ultra high-intensity green SELU6414G-S Diffused green 2.1 2.5 30 20 560 562 A GaInP
Deep green SEL6414E-TG Tinted green 2.0 2.5 18 20 558 564 GaP
Pure green SEL6514C Clear 2.0 2.5 12 20 555 559 GaP
Ultra high-intensity pure green SELS6D14C Clear 3.3 4.0 300 20 518 525 InGaN
Ultra high-intensity blue SELS6E14C-M Clear 3.7 4.2 70 20 468 470 InGaN
Red SEL6215S Tinted red 1.9 2.5 45 20 630 620 GaAsP
Orange SEL6915A Tinted orange 1.9 2.5 60 20 587 590 GaAsP
Yellow SEL6715C Clear 2.0 2.5 90 20 570 571 GaP 11
Green SEL6415E Tinted green 2.0 2.5 81 20 560 567 GaP
Pure green SEL6515C Clear 2.0 2.5 44 20 555 559 GaP
SEL2110S Tinted red 4
Deep red SEL2110R Diffused red 2.0 2.5 1.8 10 700 625 GaP
SEL2110W Diffused white 1.8
High-intensity red SEL2610C Clear 1.75 2.2 60 20 660 642 GaA As
Ultra high-intensity deep red SELU2610C-S Clear 2.0 2.5 300 20 650 639 A GaInP
SEL2210S Tinted red 40 12
Red SEL2210R Diffused red 1.9 2.5 15 20 630 620 GaAsP
SEL2210W Diffused white 15
SEL2810A Tinted orange 22
Amber 1.9 2.5 10 610 605 GaAsP
SEL2810D Diffused orange 9.0
Ultra high-intensity light amber SELU2B10A-S Tinted orange 2.0 2.5 300 20 598 595 A GaInP
135
General-purpose LEDs
Fig. No.
Contact
mount
Outline Emitting color Part No. Lens color VF (V) IV Peak wavelength Dominant wavelength
(mcd) Condition p (nm) p (nm) Chip
material
typ max typ IF (mA) typ typ
SEL2910A Tinted orange 16
Orange 1.9 2.5 10 587 590 GaAsP
SEL2910D Diffused orange 8.0
Ultra high-intensity yellow SELU2710C Clear 2.1 2.5 270 20 572 571 A GaInP
SEL2710K Tinted yellow 40
Yellow 2.0 2.5 10 570 571 GaP
SEL2710Y Diffused yellow 14
SEL2410E Tinted green 77
Green 2.0 2.5 20 560 567 GaP 12
SEL2410G Diffused green 20
SEL2510C Clear 43
Pure green 2.0 2.5 20 555 559 GaP
SEL2510G Diffused green 8.2
Ultra high-intensity pure green SELU2D10C Clear 3.3 4.0 1200 20 525 530 InGaN
Ultra high-intensity blue SELU2E10C Clear 3.3 4.0 400 20 468 470 InGaN
Blue SEL2E10C Clear 4.0 4.8 60 20 430 466 GaN
3 Round
Ultra high-intensity red SELU2215R-S Diffused red 2.0 2.5 380 20 632 624 A GaInP
SEL2215S Tinted red 45
Red 1.9 2.5 20 630 620 GaAsP
SEL2215R Diffused red 38
SEL2815A Tinted orange 80
Amber 1.9 2.5 10 610 605 GaAsP
SEL2815D Diffused orange 60
SEL2915A Tinted orange 81
Orange 1.9 2.5 10 587 590 GaAsP 13
SEL2915D Diffused orange 53
SEL2715K Tinted yellow 130
Yellow 2.0 2.5 10 570 571 GaP
SEL2715Y Diffused yellow 110
SEL2415E Tinted green 110
Green 2.0 2.5 20 560 567 GaP
SEL2415G Diffused green 72
Pure green SEL2515C Clear 2.0 2.5 52 20 555 559 GaP
Red SEL1213C Tinted red 1.9 2.5 7.0 20 630 620 GaAsP
Amber SEL1813A Tinted orange 1.9 2.5 8.0 20 610 605 GaAsP
Orange SEL1913K Tinted light orange 1.9 2.5 8.0 20 587 590 GaAsP
14
Yellow SEL1713K Tinted yellow 2.0 2.5 15 20 570 571 GaP
Green SEL1413E Tinted green 2.0 2.5 12 20 560 567 GaP
Pure green SEL1513E Tinted light green 2.0 2.5 5.0 20 555 559 GaP
Ultra high-intensity red SELU6213C-S Clear 2.0 2.5 30 20 632 624 A GaInP
Ultra high-intensity light amber SELS6B13W Diffused white 2.0 2.5 60 20 600 596 A GaInP
Inverted-cone Green SEL6413E Tinted green 2.0 2.5 14 20 560 567 GaP 15
typ for surface Deep green SEL6413E-TG Tinted green 2.0 2.5 6 20 558 564 GaP
illumination Pure green SEL6513C Clear 2.0 2.5 5.0 20 555 559 GaP
High-intensity red SEL2613CS-S Tinted light red 1.75 2.2 20 20 660 642 GaA As
Red SEL2213C Tinted red 1.9 2.5 7.0 20 630 620 GaAsP
Amber SEL2813A Tinted orange 1.9 2.5 8.0 20 610 605 GaAsP
Orange SEL2913K Tinted orange 1.9 2.5 8.0 20 587 590 GaAsP
16
Yellow SEL2713K Tinted yellow 2.0 2.5 17 20 570 571 GaP
SEL2413E Tinted green 14
Green 2.0 2.5 20 560 567 GaP
SEL2413G Diffused green 12
Pure green SEL2513E Tinted green 2.0 2.5 5.0 20 555 559 GaP
High-intensity red SEL5620C Clear 1.75 2.2 100 20 660 642 GaA As
Ultra high-intensity deep red SELU5620S-S Tinted red 2.0 2.5 100 20 650 639 A GaInP
Ultra high-intensity red SELU5220C-S Clear 2.0 2.5 120 20 632 624 A GaInP
Red SEL5220S Tinted red 1.9 2.5 20 20 630 620 GaAsP
Ultra high-intensity amber SELU5820C-S Clear 2.0 2.5 150 20 611 605 A GaInP
5mm Pitch lead Amber SEL5820A Tinted orange 1.9 2.5 12 20 610 605 GaAsP
17
rectangular Ultra high-intensity light amber SELU5B20C Clear 2.0 2.5 120 20 600 596 A GaInP
Orange SEL5920A Tinted orange 1.9 2.5 12 20 587 590 GaAsP
Ultra high-intensity yellow SELU5720C Clear 2.1 2.5 50 20 572 571 A GaInP
Green SEL5420E Tinted green 2.0 2.5 20 20 560 567 GaP
Pure green SEL5520C Clear 2.0 2.5 6.0 20 555 559 GaP
Blue SEL5E20C Clear 4.0 4.8 10 20 430 466 GaN
Ultra high-intensity red SELS5223C Clear 2.0 2.5 100 20 635 625 A GaInP
Red SEL5223S Tinted red 1.9 2.5 25 20 630 620 GaAsP
Amber SEL5823A Tinted orange 1.9 2.5 35 20 610 605 GaAsP
Ultra high-intensity light amber SELS5B23C Clear 2.0 2.5 135 20 600 596 A GaInP
Ultra high-intensity orange SELS5923C Clear 2.0 2.5 145 20 591 589 A GaInP
5mm Pitch lead Orange SEL5923A Tinted orange 1.9 2.5 35 20 587 590 GaAsP
18
bow-shaped Ultra high-intensity yellow SELU5723C Clear 2.1 2.5 155 20 572 571 A GaInP
Yellow SEL5723C Clear 2.0 2.5 60 20 570 571 GaP
Green SEL5423E Tinted green 2.0 2.5 40 20 560 567 GaP
Pure green SEL5523C Clear 2.0 2.5 13 20 555 559 GaP
Ultra high-intensity blue SELU5E23C Clear 3.3 4.0 180 20 468 470 InGaN
Blue SEL5E23C Clear 4.0 4.8 20 20 430 466 GaN
136
General-purpose LEDs
Fig. No.
Contact
mount
IV Peak wavelength Dominant wavelength
Outline Part No. Emitting color Lens color VF (V) (mcd) p (nm) p (nm) Chip Common
Condition material
typ max typ IF (mA) typ typ
Deep red 2.0 2.5 15 20 700 625 GaP
SML11516C Clear Cathode
Pure green 2.0 2.5 50 20 555 559 GaP
Deep red 2.0 2.5 6.0 20 700 625 GaP
SML1516W Diffused white Cathode
Pure green 2.0 2.5 20 20 555 559 GaP
Red 1.9 2.5 65 20 630 620 GaAsP
SML1216C Clear Cathode
Green 2.0 2.5 90 20 560 567 GaP
Red 1.9 2.5 60 20 630 620 GaAsP
SML1216W Diffused white Cathode
Green 2.0 2.5 60 20 560 567 GaP
Amber 1.9 2.5 50 20 610 605 GaAsP
SML1816W Diffused white Cathode
Green 2.0 2.5 60 20 560 567 GaP
Orange 1.9 2.5 45 20 587 590 GaAsP
5 Round SML19416W Diffused white Cathode 19
Green 2.0 2.5 60 20 560 567 GaP
Ultra high-intensity red 2.0 2.5 500 20 632 624 A GaInP
SMLU12E16C Clear Cathode
Ultra high-intensity blue 3.3 4.0 400 20 468 470 InGaN
Ultra high-intensity red 2.0 2.5 250 20 632 624 A GaInP
SMLU12E16W Diffused white Cathode
Ultra high-intensity blue 3.3 4.0 150 20 468 470 InGaN
Ultra high-intensity red 2.0 2.5 250 20 632 624 A GaInP
SMLU12D16W Diffused white Cathode
Ultra high-intensity pure green 3.3 4.0 700 20 525 530 InGaN
Ultra high-intensity amber 2.0 2.5 800 20 611 605 A GaInP
SMLU18D16C Clear Cathode
Ultra high-intensity pure green 3.3 4.0 2000 20 525 530 InGaN
Ultra high-intensity amber 2.0 2.5 300 20 611 605 A GaInP
SMLU18D16W-S Diffused white Cathode
Ultra high-intensity pure green 3.3 4.0 500 20 525 530 InGaN
Red 1.9 2.5 15 20 630 620 AGaAsP
SML72420C Clear Cathode
Green 2.0 2.5 20 20 560 567 GaP
3.36 Amber 1.9 2.5 10 20 610 605 GaAsP
Rectangular
SML78420C Clear Cathode 20
Green 2.0 2.5 20 20 560 567 GaP
Orange 1.9 2.5 10 20 587 590 GaAsP
SML79420C Clear Cathode
Green 2.0 2.5 20 20 560 567 GaP
Red 1.9 2.5 25 20 630 620 GaAsP
SML72423C Clear Cathode
Green 2.0 2.5 35 20 560 567 GaP
Red 1.9 2.5 25 20 630 620 GaAsP
SML72923C Clear Cathode
Orange 1.9 2.5 25 20 587 590 GaAsP
Amber 1.9 2.5 25 20 610 605 GaAsP
SML78423C Clear Cathode
Green 2.0 2.5 35 20 560 567 GaP
3.36 Orange 1.9 2.5 25 20 587 590 GaAsP
Bow-shaped SML79423C Clear Cathode 21
Green 2.0 2.5 35 20 560 657 GaP
Ultra high-intensity orange 2.0 2.5 150 20 590 590 A GaInP
SMLS79723C Clear Cathode
Yellow 2.0 2.5 40 20 570 571 GaP
Ultra high-intensity red 2.0 2.5 120 20 635 625 A GaInP
SMLU72423C-S Clear Cathode
Ultra high-intensity green 2.2 2.5 30 20 560 567 A GaInP
Ultra high-intensity orange 2.0 2.5 150 20 590 590 A GaInP
SMLU79423C-S Clear Cathode
Ultra high-intensity green 2.2 2.5 30 20 560 567 A GaInP
137
General-purpose LEDs
Fig. No.
IV Peak wavelength Dominant wavelength
Outline Emitting color Part No. Lens color VF (V) (mcd) p (nm) p (nm) Chip
Condition material
typ max typ IF (mA) typ typ
Red SEC4201C Clear 1.9 2.5 10 20 630 620 GaAsP
Amber SEC4801C Clear 1.9 2.5 16 20 610 605 GaAsP
Orange SEC4901C Clear 1.9 2.5 13 20 587 590 GaAsP
Side view Yellow SEC4701C Clear 2.0 2.5 25 20 570 571 GaP
22
(flat lens type) Green SEC4401C Clear 2.0 2.5 22 20 560 567 GaP
Deep green SEC4401E-TG Tinted green 2.0 2.5 11 20 558 564 GaP
Pure green SEC4501C Clear 2.0 2.5 8.0 20 555 559 GaP
Ultra high-intensity blue SECU4E01C Clear 3.3 4.0 50 20 468 470 InGaN
Red SEC4203C Clear 1.9 2.5 15 20 630 620 GaAsP
Amber SEC4803C Clear 1.9 2.5 20 20 610 605 GaAsP
Orange SEC4903C Clear 1.9 2.5 15 20 587 590 GaAsP
Side view
(inner lens type) Yellow SEC4703C Clear 2.0 2.5 35 20 570 571 GaP 23
Green SEC4403C Clear 2.0 2.5 33 20 560 567 GaP
Deep green SEC4403E-TG Tinted green 2.0 2.5 15 20 558 564 GaP
Pure green SEC4503C Clear 2.0 2.5 10 20 555 559 GaP
Deep red SEC1101C Clear 2.0 2.5 1.5 20 700 625 GaP
High-intensity red SEC1601C Clear 1.7 2.2 25 20 660 642 GaA As
Red SEC1201C Clear 1.9 2.5 10 20 630 620 GaAsP
Amber SEC1801C Clear 1.9 2.5 16 20 610 605 GaAsP
Orange SEC1901C Clear 1.9 2.5 13 20 587 590 GaAsP
31.5 Yellow SEC1701C-YG Clear 2.0 2.5 25 20 570 571 GaP
24
(flat lens type) Green SEC1401C Clear 2.0 2.5 22 20 560 567 GaP
Deep green SEC1401E-TG Tinted green 2.0 2.5 11 20 558 564 GaP
Pure green SEC1501C Clear 2.0 2.5 8.0 20 555 559 GaP
Ultra high-intensity pure green SECU1D01C Clear 3.3 4.0 150 20 525 525 InGaN
Ultra high-intensity blue SECU1E01C Clear 3.3 4.0 50 20 470 468 InGaN
Blue SEC1E01C Clear 3.9 4.8 6.0 20 430 466 GaN
High-intensity red SEC1603C Clear 1.7 2.2 35 20 660 642 GaA As
Ultra high-intensity red SECS1203C Clear 1.9 2.5 100 20 635 625 A GaInP
Red SEC1203C Clear 1.9 2.5 15 20 630 620 GaAsP
Ultra high-intensity amber SECS1803C Clear 1.9 2.5 10 3 615 607 A GaInP
Amber SEC1803C Clear 1.9 2.5 20 20 610 605 GaAsP
31.5
Ultra high-intensity orange SECS1903C Clear 1.9 2.5 70 20 590 590 A GaInP 25
(inner lens type)
Orange SEC1903C Clear 1.9 2.5 15 20 587 590 GaAsP
Yellow SEC1703C Clear 2.0 2.5 35 20 570 571 GaP
Green SEC1403C Clear 2.0 2.5 33 20 560 567 GaP
Deep green SEC1403E-TG Tinted green 2.0 2.5 15 20 558 564 GaP
Pure green SEC1503C Clear 2.0 2.5 10 20 555 559 GaP
138
General-purpose LEDs
Fig. No.
Outline Part No. Emitting color Lens color IV Peak wavelength Dominant wavelength
VF (V) (mcd) p (nm) p (nm) Chip
Condition material
typ max typ IF (mA) typ typ
Red 1.9 2.5 10 20 630 620 GaAsP
SEC2422C Clear
Green 2.0 2.5 20 20 560 567 GaP
Green 2.0 2.5 20 20 560 567 GaP
SEC2442C Clear
Green 2.0 2.5 20 20 560 567 GaP
High-intensity red 1.7 2.2 20 20 660 642 GaA As
SEC2462C Clear
Green 2.0 2.5 20 20 560 567 GaP
32.5 Orange 1.9 2.5 10 20 587 590 GaAsP
SEC2492C Clear 26
(flat lens type) Green 2.0 2.5 20 20 560 567 GaP
Pure green 2.0 2.5 5.0 20 555 559 GaP
SEC2552C Clear
Pure green 2.0 2.5 5.0 20 555 559 GaP
Orange 1.9 2.5 10 20 587 590 GaAsP
SEC2592C Clear
Pure green 2.0 2.5 5.0 20 555 559 GaP
High-intensity red 1.7 2.2 20 20 660 642 GaA As
SEC2762C-YG Clear
Yellow 2.0 2.5 20 20 570 571 GaP
Amber 1.9 2.5 20 20 610 605 GaAsP
SEC2484C Clear
Green 2.0 2.5 30 20 560 567 GaP
Pure green 2.0 2.5 10 20 555 559 GaP
SEC2554C Clear
Pure green 2.0 2.5 10 20 555 559 GaP
32.5 Orange 1.9 2.5 20 20 587 590 GaAsP
SEC2494C Clear 27
(inner lens type) Green 2.0 2.5 30 20 560 567 GaP
High-intensity red 1.7 2.2 50 20 660 642 GaA As
SEC2764C Clear
Yellow 2.0 2.5 50 20 570 571 GaP
Yellow 2.0 2.5 50 20 570 571 GaP
SEC2774C Clear
Yellow 2.0 2.5 50 20 570 571 GaP
139
General-purpose LEDs
Infrared LEDs
Absolute Maximum Ratings (Ta=25C)
Parameter Unit Ratings Conditions
IF mA 150
I F mA /C 1.33 Above 25C
I FP mA 1000 f=1kHz, tw=10s
VR V 5
Top C 30 to +85
Tstg C 30 to +100
Infrared LEDs
Electro-optical characteristics (Ta=25C)
Fig. No.
Contact
mount
Radiant intensity Ie Peak wavelength
Outline Part No. Lens color VF (V) p (nm) Chip
(mW/sr)
Condition material
typ max typ typ
SID1010CM Clear 1.3 1.5 130 940 GaAs
SID1K10CM Clear 1.3 1.5 200 940 GaAs
28
SID1010CXM Clear 1.3 1.5 80 940 GaAs
SID1K10CXM Clear 1.3 1.5 110 (Constant 940 GaAs
voltage)
SID1050CM Clear 1.3 1.5 250 940 GaAs 29
Vcc=3V,
5 Round SID303C Clear 1.3 1.5 80 R=2.2 940 GaAs
Transparent
SID313BP light purple 1.3 1.5 130 940 GaAs
Transparent
SID1003BQ light navy blue 1.3 1.5 180 940 GaAs
Transparent 30
SID307BR dark navy blue 1.3 1.5 200 940 GaAs
SID1G307C Clear 1.5 1.8 50 850 GaAs
SID1G313C Clear 1.5 1.8 50 850 GaAs
SID2010C Clear 1.3 1.5 7 940 GaAs
3 Round IF=50mA 31
SID2K10C Clear 1.3 1.5 14 940 GaAs
3 1.5
(inner lens type) SEC1G03C Clear 1.5 1.8 3 850 GaA As 25
chip
140
General-purpose LEDs
Ultraviolet LEDs
Absolute Maximum Ratings (Ta=25C)
Parameter Unit Ratings Conditions
IF mA 30
I F mA /C 0.45 Above 25C
I FP mA 100 f=1kHz, tw=10s
IR mA 100 Max. rating of built-in Zener diode
Top C 30 to +85
Tstg C 30 to +100
Fig. No.
IV Peak wavelength Electrostatic withstand voltage
Outline Part No. Lens color VF (V) (mcd) p (nm) (V) Chip
Condition Condition material
typ max typ IF(mA) typ typ
2.8 3.5 SECU1V0AC Clear 3.7 4.0 2.2 20 385 4000 100pF, 1.5k InGaN 32
141
General-purpose LEDs
142
General-purpose LEDs - External Dimensions
(Unit: mm)
0.65max
2-0.50.1
4.70.2
Fig.1 Fig.6
5.60.2 20.0min 5.00.5 7.60.2 Resin burr 0.3max
Cathode
19.0min 0.8 (1.0)
4.60.2
(2.54)
Cathode
5.00.2
(2.54)
Anode
1.0min 23.5min 7.70.5
0.8
0.5
5.70.2
0.50.1
5.60.2
Fig.2
5.60.2 1.0min 23.0min (1.0) 7.60.2 Fig.7 1.0min 25.5min 5.00.2
5.00.2
0.5
6.5
4.00.2
Cathode Cathode
2.2 0.8 1.5
(2.54)
(2.54)
0.50.1 4.8
0.50.1
0.65max
0.450.1
Resin heap 1.5max
1.1max
Fig.3 Fig.8
1.0min 24.5min 5.00.2
5.60.2 (1.0) 6.90.2
4.00.2
1.0min 23.0min
5.00.2
(1.5)
2.2
Cathode
(2.54)
(2.54)
4.8
0.50.1
0.50.1
0.65max
0.450.1
0.65max
Fig.4 Fig.9
Anode Resin burr 0.3max Resin heap 0.8max 3.5 1.0min 23.0min 5.50.5
0.50.1
(1.7) 3.50.1
0.50.1
0.80.2
0.65
max
Cathode
3.10.1
4.00.2
5.00.2
(2.54)
(2.54)
4.4
0.450.1
0.65max
Fig.5 Fig.10
0.2 0.5 0.2
5.6 20.0min 5.5 8.2 3.5 1.0min 23.0min 4.50.5
19.0min 0.8 (1.0) (1.6) 2.50.1
0.2
Cathode
0.8
Cathode
5.00.2
4.00.2
(2.54)
(2.54)
3.5
4.4
0.50.1
0.450.1
0.65max
1.1max
0.8
143
General-purpose LEDs - External Dimensions
(Unit: mm)
3.10.1
3.10.1
3.80.1
4.00.2
(2.54)
(2.54)
4.4
0.450.1
0.450.1
Resin burr 0.3max
0.65max
0.4
0.65max
0.40.1 Resin heap Resin heap 1.5max
0.8max 0.1
0.4
Cathode mark
1.7 (1.3)
(2.54)
6.00.2
3.8
(5.0)
6.2
1.4
0.450.1
0.50.1
0.65max
Cathode Resin burr 0.3max
3.6
Resin heap 0.8max
0.50.1
3.30.2
Fig.13 Fig.18
3.10.1
3.60.2
6.00.2
3.8
(5.0)
6.2
1.4
0.450.1
0.40.1 Cathode
0.65max
3.1
0.50.1
Fig.14 Fig.19
5.60.2 20.0min 5.00.5 5.80.2 1.0min 1.5min 17.0min 10.60.5
5.00.2
1.1max
3 0.50.1
Fig.15 Fig.20
3.5 1.0min 23.0min 4.5
1.0min 1.5min 20.0min 3.9
(1.7) 2.50.1
(2.54) (2.54)
3.50.1
0.2
6.00.2
(2.54)
4.4
6.2
4.0
0.80.2
0.40.1 0.450.1
0.65max
0.65max
0.50.1
144
General-purpose LEDs - External Dimensions
(Unit: mm)
3.60.2
6.00.2
6.2
1.0
3.0
2.0
1.5
1.0
0.50.1
0.65max Resin burr 0.3max
3.6 Resin heap 1.5max
0.50.1
Anode
3.10.2
Resin P.C.B.
B A
Fig.22 SEC4001
P.C.B. Cathode
Cathode mark
1.0 Resin
MAX 0.1
1.40.1
Fig.27 Cathode
2.5 mark 0.9 (0.5) 0.60.1 0.9
(1.6)
2.5
3.0
2.0
1.5
1.5 Cathode
1.0
(0.6)
3.0
2.0
1.5
1.0
1.5 0.9 (0.5)
0.1 Anode
1.4 Anode
4-R0.35 Electrode burr Lens
0.8 Resin P.C.B.
1.8
Electrode burr
0.6
MAX 0.1
0.45
2.53
1.6
2.0
1.0
3.0
1.7
Fig.28
5.60.2 1.0min 23.0min (1.0) A
5.00.2
Cathode
1.03 Resin
(2.54)
0.50.1
0.50.1
0.65max
Cathode
1.5 mark 0.9 (0.5) 1.3 Dimension A (mm)
Cathode SID1010CM 7.60.2
SID1K10CM
0.6
SID1010CXM 6.90.2
SID1K10CXM
3.0
2.0
1.5
1.6
P.C.B.
Resin Anode
Fig.29
1.0min 21.0min 9.40.3
0.50.1
0.50.1
Fig.25 Anode
0.65
max
0.9 (0.5)
0.6
2.0
1.7
1.6
0.50.1
P.C.B.
Lens Resin Anode
145
General-purpose LEDs - External Dimensions
(Unit: mm)
Fig.30 Fig.32
2.0min 24.0min 8.50.5 Surface Side view
3.5 1.4
5.6 Anode A (0.8) 3.2 0.2
(2.7)
4.80.2
(2.54)
0.60.1
0.60.1
1.1max
0.85+0.1
(2.4)
2.8
Cathode Resin burr 0.3max
Side view
Dimension A (mm)
SID303C 3.00.5
Reverse Side
0.8
SID313BP 3.60.5 Inner circuit
SID1003BQ
ZD
SID307BR 4.20.5
SID1G307C
LED
2.6
Anode Cathode
Anode Cathode
Fig.31 Fig.33
0.1 Resin: color White
1.0min 25.8min 3.5
Cathode
3.10.1
13.2 3.5
10.0 12.0
1.7 (1.3) 16 15 14 13 12 11 10 9
(2.54)
3.8
8.8 0.3
4.4
5.8
4.8
0.450.1
(0.8)
0.4
0.65max
(0.5)
146
Part Number Index in Alphanumeric Order
Part No. Description Page Part No. Description Page Part No. Description Page
2SA1488/A Power transistor 80 SEC2422C 3 x 2.5 Surface Mount 2-Chip LED 139 SEL1513E 5 Inverted-cone LED for Surface illumination 136
5 Round Narrow-directivity LED, Direct
2SA1567 Power transistor 81 SEC2442C 3 x 2.5 Surface Mount 2-Chip LED 139 SEL1550CM mount supported 134
2SA1568 Power transistor 82 SEC2462C 3 x 2.5 Surface Mount 2-Chip LED 139 SEL1610C 5 Round Standard LED (With Stopper) 134
2SA1908 Power transistor 83 SEC2484C 3 x 2.5 Surface Mount Inner Lens Type 139 SEL1610W 5 Round Standard LED (With Stopper) 134
2-Chip LED
2SB1622 Power transistor 84 SEC2492C 3 x 2.5 Surface Mount 2-Chip LED 139 SEL1615C 5 Round Narrow-directivity LED 134
3 x 2.5 Surface Mount Inner Lens Type
2SC3852 Power transistor 85 SEC2494C 2-Chip LED 139 SEL1710K 5 Round Standard LED (With Stopper) 134
2SC4024 Power transistor 86 SEC2552C 3 x 2.5 Surface Mount 2-Chip LED 139 SEL1710KM 5 Round Standard LED 134
3 x 2.5 Surface Mount Inner Lens Type
2SC4065 Power transistor 87 SEC2554C 2-Chip LED 139 SEL1710Y 5 Round Standard LED (With Stopper) 134
2SC4153 Power transistor 88 SEC2592C 3 x 2.5 Surface Mount 2-Chip LED 139 SEL1713K 5 Inverted-cone LED for Surface illumination 136
2SD2141 Power transistor 89 SEC2762C-YG 3 x 2.5 Surface Mount 2-Chip LED 139 SEL1810A 5 Round Standard LED (With Stopper) 134
3 x 2.5 Surface Mount Inner Lens Type
2SD2382 Power transistor 90 SEC2764C 2-Chip LED 139 SEL1810AM 5 Round Standard LED 134
3 x 2.5 Surface Mount Inner Lens Type
2SD2633 Power transistor 91 SEC2774C 2-Chip LED 139 SEL1810D 5 Round Standard LED (With Stopper) 134
2SK3710 MOS FET 108 SEC4201C Side-view Surface Mount LED 138 SEL1810DM 5 Round Standard LED 134
2SK3711 MOS FET 109 SEC4203C Side-view Surface Mount Inner Lens TypeLED 138 SEL1813A 5 Inverted-cone LED for Surface illumination 136
5 Round Narrow-directivity LED, Direct
2SK3724 MOS FET 110 SEC4401C Side-view Surface Mount LED 138 SEL1850AM mount supported 134
5 Round Narrow-directivity LED, Direct
2SK3800 MOS FET 111 SEC4401E-TG Side-view Surface Mount LED 138 SEL1850DM mount supported 134
2SK3801 MOS FET 112 SEC4403C Side-view Surface Mount Inner Lens TypeLED 138 SEL1910A 5 Round Standard LED (With Stopper) 134
2SK3803 MOS FET 113 SEC4403E-TG Side-view Surface Mount Inner Lens TypeLED 138 SEL1910AM 5 Round Standard LED 134
2SK3851 MOS FET 114 SEC4501C Side-view Surface Mount LED 138 SEL1910D 5 Round Standard LED (With Stopper) 134
FKV460S MOS FET 115 SEC4503C Side-view Surface Mount Inner Lens TypeLED 138 SEL1910DM 5 Round Standard LED 134
FKV660S MOS FET 116 SEC4701C Side-view Surface Mount LED 138 SEL1913K 5 Inverted-cone LED for Surface illumination 136
5 Round Narrow-directivity LED, Direct
FP812 Power transistor 92 SEC4703C Side-view Surface Mount Inner Lens TypeLED 138 SEL1950KM mount supported 134
MN611S Power transistor 93 SEC4801C Side-view Surface Mount LED 138 SEL2110R 3 Round Type LED 135
MN638S Power transistor 94 SEC4803C Side-view Surface Mount Inner Lens TypeLED 138 SEL2110S 3 Round Type LED 135
MP2-202S Ultrafast Recovery Diode (Surface Mount) 130 SEC4901C Side-view Surface Mount LED 138 SEL2110W 3 Round Type LED 135
MPL-102S Ultrafast Recovery Diode (Surface Mount) 130 SEC4903C Side-view Surface Mount Inner Lens TypeLED 138 SEL2210R 3 Round Type LED 135
PZ628 Power Zener Diode (Surface Mount) 129 SECS1203C 3 x 1.5 Surface Mount Inner Lens TypeLED 138 SEL2210S 3 Round Type LED 135
SDA03 Power transistor Array (Surface Mount) 96 SECS1803C 3 x 1.5 Surface Mount Inner Lens TypeLED 138 SEL2210W 3 Round Type LED 135
SDA04 Power transistor Array (Surface Mount) 97 SECS1903C 3 x 1.5 Surface Mount Inner Lens TypeLED 138 SEL2213C 3 Inverted-cone LED for Surface illumination 136
SDC09 Power transistor Array (Surface Mount) 98 SECU1D01C 3 x 1.5 Surface Mount LED 138 SEL2215R 3 Round Type Narrow-directivity LED 136
SDH04 High-side Power Switch IC 24 SECU1E01C 3 x 1.5 Surface Mount LED 138 SEL2215S 3 Round Type Narrow-directivity LED 136
SDK06 MOS FET Array ( Surface mount ) 117 SECU1V0AC 2.8 x 3.5 Ultraviolet Surface Mount LED 141 SEL2410E 3 Round Type LED 136
SDK08 MOS FET Array ( Surface mount ) 118 SECU4E01C Side-view Surface Mount LED 138 SEL2410G 3 Round Type LED 136
SDK09 MOS FET Array ( Surface mount ) 119 SEL1110R 5 Round Standard LED (With Stopper) 134 SEL2413E 3 Inverted-cone LED for Surface illumination 136
SEC1101C 3 x 1.5 Surface Mount LED 138 SEL1110S 5 Round Standard LED (With Stopper) 134 SEL2413G 3 Inverted-cone LED for Surface illumination 136
SEC1201C 3 x 1.5 Surface Mount LED 138 SEL1110W 5 Round Standard LED (With Stopper) 134 SEL2415E 3 Round Type Narrow-directivity LED 136
SEC1203C 3 x 1.5 Surface Mount Inner Lens TypeLED 138 SEL1210R 5 Round Standard LED (With Stopper) 134 SEL2415G 3 Round Type Narrow-directivity LED 136
SEC1401C 3 x 1.5 Surface Mount LED 138 SEL1210RM 5 Round Standard LED 134 SEL2510C 3 Round Type LED 136
SEC1401E-TG 3 x 1.5 Surface Mount LED 138 SEL1210S 5 Round Standard LED (With Stopper) 134 SEL2510G 3 Round Type LED 136
SEC1403C 3 x 1.5 Surface Mount Inner Lens TypeLED 138 SEL1210SM 5 Round Standard LED 134 SEL2513E 3 Inverted-cone LED for Surface illumination 136
SEC1403E-TG 3 x 1.5 Surface Mount Inner Lens TypeLED 138 SEL1213C 5 Inverted-cone LED for Surface illumination 136 SEL2515C 3 Round Type Narrow-directivity LED 136
5 Round Narrow-directivity LED, Direct
SEC1501C 3 x 1.5 Surface Mount LED 138 SEL1250RM mount supported 134 SEL2610C 3 Round Type LED 135
5 Round Narrow-directivity LED, Direct
SEC1503C 3 x 1.5 Surface Mount Inner Lens TypeLED 138 SEL1250SM mount supported 134 SEL2613CS-S 3 Inverted-cone LED for Surface illumination 136
SEC1601C 3 x 1.5 Surface Mount LED 138 SEL1410E 5 Round Standard LED (With Stopper) 134 SEL2710K 3 Round Type LED 136
SEC1603C 3 x 1.5 Surface Mount Inner Lens TypeLED 138 SEL1410EM 5 Round Standard LED 134 SEL2710Y 3 Round Type LED 136
SEC1701C-YG 3 x 1.5 Surface Mount LED 138 SEL1410G 5 Round Standard LED (With Stopper) 134 SEL2713K 3 Inverted-cone LED for Surface illumination 136
SEC1703C 3 x 1.5 Surface Mount Inner Lens TypeLED 138 SEL1410GM 5 Round Standard LED 134 SEL2715K 3 Round Type Narrow-directivity LED 136
SEC1801C 3 x 1.5 Surface Mount LED 138 SEL1413E 5 Inverted-cone LED for Surface illumination 136 SEL2715Y 3 Round Type Narrow-directivity LED 136
5 Round Narrow-directivity LED, Direct
SEC1803C 3 x 1.5 Surface Mount Inner Lens TypeLED 138 SEL1450EKM mount supported 134 SEL2810A 3 Round Type LED 135
5 Round Narrow-directivity LED, Direct
SEC1901C 3 x 1.5 Surface Mount LED 138 SEL1450GM-YG mount supported 134 SEL2810D 3 Round Type LED 135
SEC1903C 3 x 1.5 Surface Mount Inner Lens TypeLED 138 SEL1453CEMKT 4.6 x 5.6 Egg-shaped LED 134 SEL2813A 3 Inverted-cone LED for Surface illumination 136
SEC1E01C 3 x 1.5 Surface Mount LED 138 SEL1510C 5 Round Standard LED (With Stopper) 134 SEL2815A 3 Round Type Narrow-directivity LED 136
SEC1G03C 3 x 1.5 Infrared Surface Mount Inner Lens Type LED 140 SEL1510CM 5 Round Standard LED 134 SEL2815D 3 Round Type Narrow-directivity LED 136
147
Part Number Index in Alphanumeric Order
Part No. Description Page Part No. Description Page Part No. Description Page
SEL2910A 3 Round Type LED 136 SEL6410G 3 Round Type LED, Direct mount supported 135 SELU5B20C 5mm Pitch Lead Rectangular LED,
Direct mount supported 136
3 Inverted-cone LED for Surface illumination,
SEL2910D 3 Round Type LED 136 SEL6413E Direct mount supported 136 SELU5E23C 5mm Pitch Lead Bow-shaped LED,
Direct mount supported 136
3 Inverted-cone LED for Surface illumination, 3 Inverted-cone LED for Surface illumination,
SEL2913K 3 Inverted-cone LED for Surface illumination 136 SEL6413E-TG Direct mount supported 136 SELU6213C-S Direct mount supported 136
3 Round Type Wide-directivity LED,
SEL2915A 3 Round Type Narrow-directivity LED 136 SEL6414E Direct mount supported 135 SELU6214C 3 Round Type Wide-directivity LED,
Direct mount supported 135
3 Round Type Wide-directivity LED, 3 Round Type Wide-directivity LED,
SEL2915D 3 Round Type Narrow-directivity LED 136 SEL6414E-TG Direct mount supported 135 SELU6414G-S Direct mount supported 135
3 Round Type Narrow-directivity LED,
SEL2E10C 3 Round Type LED 136 SEL6415E Direct mount supported 135 SELU6614C-S 3 Round Type Wide-directivity LED,
Direct mount supported 135
3 Round Type Wide-directivity LED,
SEL4110R 4 Round Type LED 134 SEL6510C 3 Round Type LED, Direct mount supported 135 SELU6614W-S Direct mount supported 135
SEL4110S 4 Round Type LED 134 SEL6510G 3 Round Type LED, Direct mount supported 135 SELU6714C 3 Round Type Wide-directivity LED,
Direct mount supported 135
4 Round Type Wide-directivity LED, 3 Inverted-cone LED for Surface illumination,
SEL4114R Direct mount supported 135 SEL6513C Direct mount supported 136 SELU6910C-S 3 Round Type LED, Direct mount supported 135
4 Round Type Wide-directivity LED, 3 Round Type Wide-directivity LED, 3 Round Type Wide-directivity LED,
SEL4114S Direct mount supported 135 SEL6514C Direct mount supported 135 SELU6914C-S Direct mount supported 135
3 Round Type Narrow-directivity LED,
SEL4210R 4 Round Type LED 134 SEL6515C Direct mount supported 135 SEP8WD4001 Multi-chip LED Module 142
SEL4210S 4 Round Type LED 134 SEL6710K 3 Round Type LED, Direct mount supported 135 SEP8WE4001 Multi-chip LED Module 142
4 Round Type Wide-directivity LED,
SEL4214R Direct mount supported 135 SEL6710Y 3 Round Type LED, Direct mount supported 135 SEP8WL4001 Multi-chip LED Module 142
4 Round Type Wide-directivity LED, 3 Round Type Wide-directivity LED,
SEL4214S Direct mount supported 135 SEL6714K Direct mount supported 135 SEP8WN4001 Multi-chip LED Module 142
3 Round Type Wide-directivity LED,
SEL4410E 4 Round Type LED 135 SEL6714W Direct mount supported 135 SEP8WW4001 Multi-chip LED Module 142
3 Round Type Narrow-directivity LED,
SEL4410G 4 Round Type LED 135 SEL6715C Direct mount supported 135 SFPB-54 Schottky Barrier Diode(Surface Mount) 130
4 Round Type Wide-directivity LED,
SEL4414E Direct mount supported 135 SEL6810A 3 Round Type LED, Direct mount supported 135 SFPB-56 Schottky Barrier Diode(Surface Mount) 130
4 Round Type Wide-directivity LED,
SEL4414G Direct mount supported 135 SEL6810D 3 Round Type LED, Direct mount supported 135 SFPB-59 Schottky Barrier Diode(Surface Mount) 130
3 Round Type Wide-directivity LED,
SEL4510C 4 Round Type LED 135 SEL6814A Direct mount supported 135 SFPB-64 Schottky Barrier Diode(Surface Mount) 130
4 Round Type Wide-directivity LED,
SEL4514C Direct mount supported 135 SEL6910A 3 Round Type LED, Direct mount supported 135 SFPB-66 Schottky Barrier Diode(Surface Mount) 130
SEL4710K 4 Round Type LED 134 SEL6910D 3 Round Type LED, Direct mount supported 135 SFPB-69 Schottky Barrier Diode(Surface Mount) 130
3 Round Type Wide-directivity LED,
SEL4710Y 4 Round Type LED 134 SEL6914A Direct mount supported 135 SFPB-74 Schottky Barrier Diode(Surface Mount) 130
4 Round Type Wide-directivity LED, 3 Round Type Wide-directivity LED,
SEL4714K Direct mount supported 135 SEL6914W Direct mount supported 135 SFPB-76 Schottky Barrier Diode(Surface Mount) 130
4 Round Type Wide-directivity LED, 3 Round Type Narrow-directivity LED,
SEL4714Y Direct mount supported 135 SEL6915A Direct mount supported 135 SFPE-64 Schottky Barrier Diode(Surface Mount) 130
SEL4810A 4 Round Type LED 134 SEL6E10C 3 Round Type LED, Direct mount supported 135 SFPJ-53 Schottky Barrier Diode(Surface Mount) 130
SEL4810D 4 Round Type LED 134 SELS1E10CXM-M 5 Round Wide-directivity LED 134 SFPJ-63 Schottky Barrier Diode(Surface Mount) 130
4 Round Type Wide-directivity LED, 5mm Pitch Lead Bow-shaped LED,
SEL4814A Direct mount supported 135 SELS5223C Direct mount supported 136 SFPJ-73 Schottky Barrier Diode(Surface Mount) 130
4 Round Type Wide-directivity LED, 5mm Pitch Lead Bow-shaped LED,
SEL4814D Direct mount supported 135 SELS5923C Direct mount supported 136 SFPL-52 Ultrafast Recovery Diode(Surface Mount) 130
5mm Pitch Lead Bow-shaped LED,
SEL4910A 4 Round Type LED 134 SELS5B23C Direct mount supported 136 SFPL-62 Ultrafast Recovery Diode(Surface Mount) 130
3 Inverted-cone LED for Surface illumination,
SEL4910D 4 Round Type LED 134 SELS6B13W Direct mount supported 136 SFPL-64 Ultrafast Recovery Diode(Surface Mount) 130
4 Round Type Wide-directivity LED, 3 Round Type Wide-directivity LED,
SEL4914A Direct mount supported 135 SELS6B14C Direct mount supported 135 SFPM-52 Rectifier Diode(Surface Mount) 130
4 Round Type Wide-directivity LED, 3 Round Type Wide-directivity LED,
SEL4914D Direct mount supported 135 SELS6D14C Direct mount supported 135 SFPM-54 Rectifier Diode(Surface Mount) 130
5mm Pitch Lead Rectangular LED, 3 Round Type Wide-directivity LED,
SEL5220S Direct mount supported 136 SELS6E14C-M Direct mount supported 135 SFPM-62 Rectifier Diode(Surface Mount) 130
5mm Pitch Lead Bow-shaped LED,
SEL5223S Direct mount supported 136 SELU1210CXM 5 Round Wide-directivity LED 134 SFPM-64 Rectifier Diode(Surface Mount) 130
5mm Pitch Lead Rectangular LED, 5 Round Narrow-directivity LED,
SEL5420E Direct mount supported 136 SELU1250CM Direct mount supported 134 SFPW-56 Schottky Barrier Diode(Surface Mount) 130
5mm Pitch Lead Bow-shaped LED,
SEL5423E Direct mount supported 136 SELU1253CMKT 4.6 x 5.6 Egg-shaped LED 134 SFPZ-68 Power Zener Diode 129
5mm Pitch Lead Rectangular LED,
SEL5520C Direct mount supported 136 SELU1910CXM-S 5 Round Wide-directivity LED 134 SG-9CNR Rectifier Diode for Alternator 127
5mm Pitch Lead Bow-shaped LED,
SEL5523C Direct mount supported 136 SELU1D10CXM 5 Round Wide-directivity LED 134 SG-9CNS Rectifier Diode for Alternator 127
5mm Pitch Lead Rectangular LED, 5 Round Narrow-directivity LED,
SEL5620C Direct mount supported 136 SELU1D50CM Direct mount supported 134 SG-9CZR Rectifier Diode for Alternator 127
5mm Pitch Lead Bow-shaped LED,
SEL5723C Direct mount supported 136 SELU1E10CXM 5 Round Wide-directivity LED 134 SG-9CZS Rectifier Diode for Alternator 127
5mm Pitch Lead Rectangular LED, 5 Round Narrow-directivity LED,
SEL5820A Direct mount supported 136 SELU1E50CM Direct mount supported 134 SG-9LCNR Rectifier Diode for Alternator 127
5mm Pitch Lead Bow-shaped LED,
SEL5823A Direct mount supported 136 SELU2215R-S 3 Round Type Narrow-directivity LED 136 SG-9LCNS Rectifier Diode for Alternator 127
5mm Pitch Lead Rectangular LED,
SEL5920A Direct mount supported 136 SELU2610C-S 3 Round Type LED 135 SG-9LLCNR Rectifier Diode for Alternator 127
5mm Pitch Lead Bow-shaped LED,
SEL5923A Direct mount supported 136 SELU2710C 3 Round Type LED 136 SG-9LLCNS Rectifier Diode for Alternator 127
5mm Pitch Lead Rectangular LED,
SEL5E20C Direct mount supported 136 SELU2B10A-S 3 Round Type LED 135 SG-9LLCZR Rectifier Diode for Alternator 127
5mm Pitch Lead Bow-shaped LED,
SEL5E23C Direct mount supported 136 SELU2D10C 3 Round Type LED 136 SG-9LLCZS Rectifier Diode for Alternator 127
SEL6110R 3 Round Type LED, Direct mount supported 135 SELU2E10C 3 Round Type LED 136 SG-10LLR Rectifier Diode for Alternator 127
SEL6110S 3 Round Type LED, Direct mount supported 135 SELU4410CKT-S 4 Round Type LED 135 SG-10LLS Rectifier Diode for Alternator 127
5mm Pitch Lead Rectangular LED,
SEL6210R 3 Round Type LED, Direct mount supported 135 SELU5220C-S Direct mount supported 136 SG-10LLXR Rectifier Diode for Alternator 127
5mm Pitch Lead Rectangular LED,
SEL6210S 3 Round Type LED, Direct mount supported 135 SELU5620S-S Direct mount supported 136 SG-10LLXS Rectifier Diode for Alternator 127
3 Round Type Wide-directivity LED, 5mm Pitch Lead Rectangular LED,
SEL6214S Direct mount supported 135 SELU5720C Direct mount supported 136 SG-10LLZ23R Rectifier Diode for Alternator 127
3 Round Type Narrow-directivity LED, 5mm Pitch Lead Bow-shaped LED,
SEL6215S Direct mount supported 135 SELU5723C Direct mount supported 136 SG-10LLZ23S Rectifier Diode for Alternator 127
5mm Pitch Lead Rectangular LED,
SEL6410E 3 Round Type LED, Direct mount supported 135 SELU5820C-S Direct mount supported 136 SG-10LR Rectifier Diode for Alternator 127
148
Part Number Index in Alphanumeric Order
SG-10LS Rectifier Diode for Alternator 127 SML1516W 5 Round Standard Bicolor LED 137
SG-10LXR Rectifier Diode for Alternator 127 SML1816W 5 Round Standard Bicolor LED 137
SG-10LXS Rectifier Diode for Alternator 127 SML19416W 5 Round Standard Bicolor LED 137
SG-10LZ23R Rectifier Diode for Alternator 127 SML72420C 3.3 x 6 Rectangular Type Bicolor LED 137
SG-10LZ23S Rectifier Diode for Alternator 127 SML72423C 3.3 x 6 Bow-Shaped Type Bicolor LED 137
SG-14LXZS Rectifier Diode for Alternator 127 SML72923C 3.3 x 6 Bow-Shaped Type Bicolor LED 137
SG-14LXZS Rectifier Diode for Alternator 127 SML78420C 3.3 x 6 Rectangular Type Bicolor LED 137
SHV-01JN High-Voltage Rectifier Diode for Ignition Coil 128 SML78423C 3.3 x 6 Bow-Shaped Type Bicolor LED 137
SHV-05J High-Voltage Rectifier Diode for Ignition Coil 128 SML79420C 3.3 x 6 Rectangular Type Bicolor LED 137
SHV-06JN High-Voltage Rectifier Diode for Ignition Coil 128 SML79423C 3.3 x 6 Bow-Shaped Type Bicolor LED 137
SI-3001S Linear Regulator IC 8 SMLS79723C 3.3 x 6 Bow-Shaped Type Bicolor LED 137
SI-3003S Linear Regulator IC 10 SMLU12D16W 5 Round Standard Bicolor LED 137
SI-3101S Linear Regulator IC 12 SMLU12E16C 5 Round Standard Bicolor LED 137
SI-3102S Linear Regulator IC 14 SMLU12E16W 5 Round Standard Bicolor LED 137
SI-3201S Switching Regulator IC 22 SMLU18D16C 5 Round Standard Bicolor LED 137
SI-3322S System Regulator IC 16 SMLU18D16W-S 5 Round Standard Bicolor LED 137
SI-5151S High-side Power Switch IC 26 SMLU72423C-S 3.3 x 6 Bow-Shaped Type Bicolor LED 137
SI-5152S High-side Power Switch IC 28 SMLU79423C-S 3.3 x 6 Bow-Shaped Type Bicolor LED 137
SI-5153S High-side Power Switch IC 30 SPF0001 Power transistor Array (Surface Mount) 100
SI-5154S High-side Power Switch IC 32 SPF3004 System Regulator IC 18
SI-5155S High-side Power Switch IC 34 SPF3006 System Regulator IC 20
SI-5300 Full-bridge Motor Driver IC 60 SPF5002A Low-side Power Switch IC 50
SID1003BQ 5 Round Infrade LED 140 SPF5003 High-side Power Switch IC 40
SID1010CM 5 Round Infrade LED 140 SPF5004 High-side Power Switch IC 42
SID1010CXM 5 Round Infrade LED 140 SPF5007 High-side Power Switch IC 44
SID1050CM 5 Round Infrade LED, Direct mount supported 140 SPF5009 Low-side Power Switch IC 52
SID1G307C 5 Round Infrade LED 140 SPF5012 Low-side Power Switch IC 54
SID1G313C 5 Round Infrade LED 140 SPF5017 High-side Power Switch IC 46
SID1K10CM 5 Round Infrade LED 140 SPF5018 High-side Power Switch IC 48
SID1K10CXM 5 Round Infrade LED 140 SPF7211 Stepper-motor Driver IC 58
SID2010C 3 Round Infrade LED 140 SPF7301 Full-bridge Motor Driver IC 62
SID2K10C 3 Round Infrade LED 140 SSD103 Power transistor 95
SID303C 5 Round Infrade LED 140 STA315A Power transistor Array 101
SID307BR 5 Round Infrade LED 140 STA335A Power transistor Array 102
SID313BP 5 Round Infrade LED 140 STA415A Power transistor Array 103
SJPZ-E18 Power Zener Diode (Surface Mount) 129 STA460C Power transistor Array 104
SJPZ-E27 Power Zener Diode (Surface Mount) 129 STA461C Power transistor Array 105
SJPZ-E33 Power Zener Diode (Surface Mount) 129 STA463C Power transistor Array 106
SJPZ-E36 Power Zener Diode (Surface Mount) 129 STA464C Power transistor Array 107
SJPZ-K28 Power Zener Diode (Surface Mount) 129 STA508A MOS FET Array 123
SLA2402M High Voltage Driver IC for HID Lamps 64 STA509A MOS FET Array 124
SLA2403M High Voltage Driver IC for HID Lamps 68 SZ-10N27 Power Zener Diode (Surface Mount) 129
SLA2501M High-side Power Switch IC 36 SZ-10N40 Power Zener Diode (Surface Mount) 129
SLA2502M High-side Power Switch IC 38 SZ-10NN27 Power Zener Diode (Surface Mount) 129
SLA4708M Stepper-motor Driver IC 56 SZ-10NN40 Power Zener Diode (Surface Mount) 129
SLA5027 MOS FET Array 120 TFC561D 3-Pin Reverce Conducting Thyrisyor for 125
HID Lamp Ignition
SLA5098 MOS FET Array 121 TFC562D 3-Pin Reverce Conducting Thyrisyor for 126
HID Lamp Ignition
SLA8004 Power transistor Array 99
SMA2409M High Voltage Driver IC for HID Lamps 72
SMA5113 MOS FET Array 122
SML11516C 5 Round Standard Bicolor LED 137
SML1216C 5 Round Standard Bicolor LED 137
SML1216W 5 Round Standard Bicolor LED 137
149
http://www.sanken-ele.co.jp Sanken products are manufactured and delivered to the customer based
SANKEN ELECTRIC CO.,LTD. ISO 9001/14001 Certified on a strict quality and environmental control system established and
certified by the ISO 9001/14001 international certification standards.
1-11-1 Nishi-Ikebukuro, Toshima-ku, Tokyo
Tel: 81-3-3986-6164 Fax: 81-3-3986-8637
IProducts: Power IC, Control IC, Hall IC, Bipolar Transistor, MOS FET, IGBT, Thyristor, Rectifier Diode, LED (Light Emitting Diode), CCFL (Cold Cathode Fluorescent Lamp),
Switching Power Supply, UPS (Uninterruptible Power Supply), DC Power Supply, Inverter, Universal Airway Beacon System and Other Power Supplies and Equipments
Korea
Sanken Electric Korea Co., Ltd.
Mirae Asset Life Bldg., 6F 168, Kongduk-dong, Mapo-ku, Seoul, 121-705, Korea
Tel: 82-2-714-3700 Fax: 82-2-3272-2145
Taiwan
Taiwan Sanken Electric Co., Ltd.
Room 1801, 18th Floor, 88 Jung Shiau East Road, Sec. 2, Taipei 100, Taiwan R.O.C.
Tel: 886-2-2356-8161 Fax: 886-2-2356-8261
This
The information contained in this document is correct as of July 2006.
is notification that you, as purchaser of the products/technology, are not allowed to perform any of the following:
1. Resell or retransfer these products/technology to any party intending to disturb international peace and security.
2. Use these products/technology yourself for activities disturbing international peace and security.
3. Allow any other party to use these products/technology for activities disturbing international peace and security.
Also, as purchaser of these products/technology, you agree to follow the procedures for the export or transfer of these products/technology, under the Foreign Exchange and Foreign
Trade Law, when you export or transfer the products/technology abroad.