The document provides instructions for connecting a serial suite to an ECU plug and reading and writing to the ECU. It specifies connecting the red wire to the red pins for power and the black wire to the black pins for ground. It indicates where to connect the flat cable and to put 5 wires in bridge formation to read the ECU. For writing to the ECU, it says to remove 1 bridge, add 2 more wires in bridge formation while keeping the flat cable connected.
The document provides instructions for connecting a serial suite to an ECU plug and reading and writing to the ECU. It specifies connecting the red wire to the red pins for power and the black wire to the black pins for ground. It indicates where to connect the flat cable and to put 5 wires in bridge formation to read the ECU. For writing to the ECU, it says to remove 1 bridge, add 2 more wires in bridge formation while keeping the flat cable connected.
The document provides instructions for connecting a serial suite to an ECU plug and reading and writing to the ECU. It specifies connecting the red wire to the red pins for power and the black wire to the black pins for ground. It indicates where to connect the flat cable and to put 5 wires in bridge formation to read the ECU. For writing to the ECU, it says to remove 1 bridge, add 2 more wires in bridge formation while keeping the flat cable connected.
Tel: +39 0342 489060 - Fax: +39 0342 488298 WRITE the ECU: You have to remove 1 bridge used before (picture 1), put other 2 wire(bridge) like in the picture, the flat cable is still connect.