Classification of FRP pipes-ASTM D 2996.
General Designation Requirements for Machine-made Reinforced Resin Pipe
4 Coll Limits
ri 2 5
4 Type Filament wound Centrifugally cast Pressure laminated
H 5 a 5 G a
Asbestos Asbestos Glass Fibre
2 Grade “tess Fibre Asbestos reinforced reinforced reinforced_—_-Reinforced
ere Phenolic Polyester Resin. Epoxy Phenolic Furan
Epoxy Resin Resin Resin Resin resin
a D E G a iH i
Polyster Epoxy Furen
ster Epoxy Phenolic Resin Polyester "POY Phenolic Resin Thermo FURR
FTES No Liner gS Resiniiner liner non- Resin liner Resin liner Plastic resin f25in
liner non ponereinforcee reinforced reinforced qi", reinforces liner specify iN®™
Hoop Stress-Hydrostatic Design Basis
cyte AB
psi 2500 3150, 4000 5000 6300800010000 12500
| (Mpa) (37.2) 21.7) (27.5) (34.4) (43.4) (55.1) (68.9) (86.1)
Static
psi 50006300. 8000 12500 16000-20000 25000
(Mpa), (34.4) (43.4) (55.1) (68.9) (86.1) (110.0) (437.0) (172.0)
End Type:
For pipe subjected to axial or end loads, the effect of these loads shall be repr
Pee aie ae eran ea
eee en ea ene ee eee ey
Designation Mechanical property Unit 1 2 3 4 5 6
Short-term rupture strength,
exces )
Poe cert
5 eed
- ee oc?
Err
Mpa 55,2103 172 21 310-379
m2, kPa 4.5 22,6 13 170 226 282
For example, RTRP11 F A 1 1334 is a classification in which the the numerals and alphabets stands for the
following;
RTRP
en)
Ca)
le modul
ete eat
Geese pera mee ne)