Professional Documents
Culture Documents
7r PDF
7r PDF
Pradipta Biswas
Roll No. 04IT6007
M. Tech. (IT)
School of Information Technology
Indian Institute of Technology, Kharagpur
ABSTRACT
W-CDMA (Wideband Code-Division Multiple Access), an ITU standard derived from Code Division
Multiple Access, is officially known as IMT-2000 direct spread. W-CDMA is a third-generation mobile
wireless technology that promises much higher data speeds to mobile and portable wireless devices than
commonly offered in today's market. The present seminar discusses the applicability of WCDMA system
with respect to 3G mobile system. The reason for the popularity of spread spectrum technique is addressed
and the evolution of WCDMA over CDMA is also pointed out. The protocol architecture of WCDMA,
WCDMA network architecture and the compatibilty of existing GSM system with WCDMA system are also
discussed in brief.
Keywords: Code Division Multiple Access, Wideband Code Division Multiple Access, Protocol
architecture, Radio Access Network, Global System Miobile
1 Introduction
There has been a tremendous growth in wireless communication technology over the past
decade. The significant increase in subscribers and traffic, new bandwidth consuming
applications such as gaming, music down loading and video streaming will place new
demands on capacity. The answer to the capacity demand is the provision of new
spectrum and the development of a new technology Wideband CDMA or hereinafter
referred to as WCDMA.
WCDMA was developed in order to create a global standard for real time multimedia
services that ensured international roaming. With the support of ITU (International
Telecommunication Union) a specific spectrum was allocated 2GHz for 3G telecom
systems. The work was later taken over by the 3GPP (3rd Generation Partnership
Project), which is now the WCDMA specification body with delegates from all over the
world.
2 What is 3G System
UMTS (Universal Mobile Telecommunications System) is a so-called "third-generation
(3G)," broadband, packet-based transmission of text, digitized voice, video, and
multimedia at data rates up to and possibly higher than 2 megabits per second (Mbps),
offering a consistent set of services to mobile computer and phone users no matter where
they are located in the world. Based on the GSM communication standard, UMTS,
endorsed by major standards bodies and manufacturers, is the planned standard for
mobile users around the world by 2002. Once UMTS is fully implemented, computer and
phone users can be constantly attached to the Internet as they travel and, as they roaming
service, have the same set of capabilities no matter where they travel to. Users will have
access through a combination of terrestrial wireless and satellite transmissions. Until
UMTS is fully implemented, users can have multi-mode devices that switch to the
currently available technology where UMTS is not yet available.
Today's cellular telephone systems are mainly circuit-switched, with connections always
dependent on circuit availability. Packet-switched connection, using the Internet Protocol
(Internet Protocol), means that a virtual connection is always available to any other end
point in the network. It will also make it possible to provide new services, such as
alternative billing methods (pay-per-bit, pay-per-session, flat rate, asymmetric bandwidth,
and others). The higher bandwidth of UMTS also promises new services, such as video
conferencing. UMTS promises to realize the Virtual Home Environment in which a
roaming user can have the same services to which the user is accustomed when at home
or in the office, through a combination of transparent terrestrial and satellite connections.
UMTS is a network consisting of two main elements connected over a standard interface,
called Iu. These two elements are:
UTRAN (UMTS Terrestrial Radio Access Network). This is composed of Node B which
is equivalent to the GSM BTS and the Radio Network Controller (RNC) which is
equivalent to the GSM BSC. A novelty with the UTRAN concept is the existence of a
new modulation scheme: the Frequency Division Duplex (FDD) and W-CDMA. This
mode offers the highest efficiency within a single system whatever the conditionswide
area, urban, indoor coverage from outdoor, indoor, and so on. One carrier use 5 Mhz.
The Core Network. This is the equivalent of the GSM NSS. There are two options for
the implementation of 3G and the evolution of the GSM Core Network:
ATM based architecture: this R'99 architecture may reuses in some cases the two-domain
architecture of GSM/GPRS, with:
Iu-PS (Packet Switched) interface instead of Gb on the packet domain.
Iu-CS (Circuit Switched) interface instead of A on the circuit domain.
Transport Independent and multimedia architecture: this R'00 architecture is in line with
the Next Generation Networks architecture and introduces separation of control and user
planes. It also integrates multimedia capabilities.
5 WCDMA
The original CDMA standard, also known as CDMA One and still common in cellular
telephones in the U.S., offers a transmission speed of only up to 14.4 Kbps in its single
channel form and up to 115 Kbps in an eight-channel form. The next version of CDMA,
CDMA2000, also known as IMT-CDMA Multi-Carrier or 1xRTT, can support mobile
data communications at speeds ranging from 144 Kbps to 2 Mbps.
3.84 Mcps, which is about three times higher than the chip rate of CDMA2000 (1.22
Mcps).
The main benefits of a wideband carrier with a higher chiprate are:
Further, experience from second-generation systems like GSM and cdmaOne has enabled
improvements to be incorporated in WCDMA. Focus has also been put on ensuring that
as much as possible of WCDMA operators investments in GSM equipment can be re-
used. Examples are the re-use and evolution of the core network, the focus on co-siting
and the support of GSM handover. In order to use GSM handover the subscribers need
dual mode handsets.
The Physical Layer (Layer 1) offers Transport Channels to the MAC layer. There are
different types of transport channels with different characteristics of the transmission.
Common transport channels can be shared by multiple handsets (e.g. FACH, RACH,
DSCH, BCH, PCH). Dedicated transport channels (DCH) are assigned to only one
handset at a time. The transmission functions of the physical layer include channel coding
and interleaving, multiplexing of transport channels, mapping to physical channels,
spreading, modulation and power amplification, with corresponding functions for
reception. The following is the physical layer frame structure of WCDMA.
A frequency and a code characterize a physical channel. The specifications include two
modes: the FDD mode (Frequency Division Duplex) and the TDD mode (Time Division
Duplex). The FDD mode is the mainstream mode that operators are now deploying in
WCDMA. The TDD mode may eventually be deployed as well, as a complement to the
FDD mode.
The Medium Access Control (MAC) protocol (Layer 2) offers logical channels to the
layers above. The logical channels are distinguished by the different type of information
they carry. The main two types are,
The MAC layer performs scheduling and mapping of logical channel data onto the
transport channels provided by the physical layer. Also, for common transport channels,
the MAC layer adds addressing information to distinguish data flows intended for dif-
ferent handsets. One major difference to GSM is the possibility to dynamically switch
one logical channel (data flow) onto different transport channel types, e.g. based on the
activity of the subscriber. This is called channel type switching.
The Radio Link Control (RLC) protocol (Layer 2) operates in one of three modes:
transparent, unacknowledged or acknowledged mode. It performs segmentation/re-
assembly functions and, in acknowledged mode, provides an assured mode delivery ser-
vice by use of retransmission. RLC provides a service both for the RRC signaling (the
Signaling Radio Bearer) and for the user data transfer (the Radio Access Bearer).
The Radio Resource Control (RRC) protocol (Layer 3) provides control of the handset
from the RNC. It includes functions to control radio bearers, physical channels, mapping
of the different channel types, handover, measurement and other mobility procedures.
Because of the flexibility of the WCDMA radio interface, this is a fairly complex
protocol.
The main purpose of the WCDMA Radio Access Network is to provide a connection
between the handset and the core network and to isolate all the radio issues from the core
network. The advantage is one core network supporting multiple access technologies.
The WCDMA Radio Access Network consists of two types of nodes:
The Radio Base Station handles the radio transmission and reception to/from the handset
over the radio interface (Uu). It is controlled from the Radio Network Controller via the
Iub interface. One Radio Base Station can handle one or more cells.
The Radio Network Controller is the node that controls all WCDMA Radio Access
Network functions. It connects the WCDMA Radio Access Network to the
core network via the lu interface. There are two distinct roles for the RNC, to serve and to
control. The Serving RNC has overall control of the handset that is connected to
WCDMA Radio Access Network. It controls the connection on the lu interface for the
handset and it terminates several protocols in the contact between the handset and the
WCDMA Radio Access Network.
The Controlling RNC has the overall control of a particular set of cells, and their
associated base stations. When a handset must use resources in a cell not controlled by its
Serving RNC, the Serving RNC must ask the Controlling RNC for those resources. This
request is made via the Iur interface, which connects the RNCs with each other. In this
case, the Controlling RNC is also said to be a Drift RNC for this particular handset. This
kind of operation is primarily needed to be able to provide soft handover throughout the
network.
The main service offered by WCDMA RAN is the Radio Access Bearer (RAB). To
establish a call connection between the handset and the base station a RAB is needed. Its
characteristics are different depending on what kind of service/information to be
transported.
The RAB carries the subscriber data between the handset and the core network. It is
composed of one or more Radio Access Bearers between the handset and the Serving
RNC, and one lu bearer between the Serving RNC and the core network.
3GPP has defined four different quality classes of Radio Access Bearers:
Both the Conversational and Streaming RABs require a certain reservation of resources
in the network, and are primarily meant for real-time services. They differ mainly in that
the Streaming RAB tolerates a higher delay, appropriate for one-way real-time services.
The Interactive and Background RABs are so called best effort, i.e. no resources are
reserved and the throughput depends on the load in the cell. The only difference is that
the Interactive RAB provides a priority mechanism.
The RAB is characterized by certain Quality of Service (QoS) parameters, such as bit rate
and delay. The core network will select a RAB with appropriate QoS based on the service
request from the subscriber, and ask the RNC to provide such a RAB.
The WCDMA Radio Access Network nodes communicate with each other over a
transport network. The 3GPP specification provides a very clear split between radio
related (WCDMA) functionality and the transport technology, meaning that there is no
particular bias to any technology. The transport network is initially based on ATM, but IP
will soon be included as an option.
9 Abbreviations
CDMA Code Division Multiple Access GSM BSS GSM Base Station Subsystem
WCDMA Wideband Code Division Multiple Access GSM BSC GSM Base Station Controller
cdmaOne Code Division Multiple Access GSM BTS GSM Base Transceiver Station
as specified in IS-95 TDMA Time Division Multiple Access
CDMA
Code Division Multiple Access RNC Radio Network Controller
2000
as specified in IS-2000 RAB Radio Access Bearer
ITU International Telecommunication Union QoS Quality of Service
3GPP 3rd Generation Partnership Project FDD Frequency Division Duplex
Mcps Mega chips per second TDD Time Division Duplex
GSM Global System for Mobile Communication MAC Medium Access Control
RBS Radio Base Station RLC Radio Link Control
Node B Radio Base Station RRC Radio Resource Control
RAN Radio Access Network IP Internet Protocol