_Debbie Blair
Blushing Baubles iy...
What you need:
7 cream 8mm crystal pears
4 peach &mm erystal pearls
2 powder almond 8mm crystal pearis
5 cream 10mm crystal pearls,
3 peach 10mm crystal pearls
1 powder almond 10mm erystal pearl
10 cream 12mm crystal pearls,
3 peach 12mm crystal pearls
3 powder almond 12mm crystal pearls
‘L brass plated 7x12mm lobster clasp
38 brass 4mm jump rings
5 brass 6mm jump rings
38 brass 24 gauge 142" head pins
111” of copper 6.5x10mm haltfiat
curb chain
5 of gunmetal 6.5%LOmm halt-tat
curb chain
9" of brass 6.5%10mm halffiat
curb chain
Roundnose pliers
Chain: or fat nose pliers
Wire cutters
FINISHED SIZE: 8
1 cut the brass chain into one 314" piece
‘and two 254" pieces. Cut the gunmetal
chain into two 234" pieces. Cut the copper
chain into four 2% pieoes.
2 Use 1 head pin to string 1. pear; form
‘2 wrapped loop. Repeat thiryseven times
using the remaining pearls and head pins
fora total of 38 pearl dangles.
5 use one 4min jump ring to attach 4 pearl
dangle to the 344" antique brass chain.
Repeat thirty-seven times to attach the
remaining pearl dangles at random to the
same chain,
Use one 6mm jump ring to attach one
lend of 1 gunmetal chain, one 214" brass
chain, and 2 copper chains to one end of
the 314" bres chain used in Step 3.
5 attach one 6mm jump ring to the free
tends ofthe previous chains, then attach one
{6mm jump ring to the previous jump ring,
6 Repest Step 4 using the other end of the
3%" brass chain, Use one 6mm jump ring
to attach the lobster clasp tothe other ands
of the chains.
RESOURCES: Creck your local bead shap or
‘see page 135 for nove information. Al materials
FusionBeace.com,
BOIL | 404 Bracelet, Neckuces and Kavrngs 25