You are on page 1of 5

2SA1013

TOSHIBA Transistor Silicon PNP Epitaxial Type (PCT Process)

2SA1013
Color TV Verttical Deflection Output Applications
Unit: mm
Power Switching Applications

High voltage: VCEO = 160 V


Large continuous collector current capability
Recommended for vertical deflection output & sound output
applications for line-operated TV.
Complementary to 2SC2383.

Absolute Maximum Ratings (Ta = 25C)

Characteristics Symbol Rating Unit

Collector-base voltage VCBO 160 V


Collector-emitter voltage VCEO 160 V
Emitter-base voltage VEBO 6 V
Collector current IC 1 A
Base current IB 0.5 A
Collector power dissipation PC 900 mW JEDEC TO-92MOD
Junction temperature Tj 150 C JEITA
Storage temperature range Tstg 55 to 150 C
TOSHIBA 2-5J1A
Note: Using continuously under heavy loads (e.g. the application of high Weight: 0.36 g (typ.)
temperature/current/voltage and the significant change in
temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating
conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(Handling Precautions/Derating Concept and Methods) and individual reliability data (i.e. reliability test report
and estimated failure rate, etc).

1 2006-11-09
2SA1013
Electrical Characteristics (Ta = 25C)

Characteristics Symbol Test Condition Min Typ. Max Unit

Collector cut-off current ICBO VCB = 150 V, IE = 0 1.0 A


Emitter cut-off current IEBO VEB = 6 V, IC = 0 1.0 A
Collector-emitter breakdown voltage V (BR) CEO IC = 10 mA, IB = 0 160 V
DC current gain hFE (Note) VCE = 5 V, IC = 200 mA 60 200
Collector-emitter saturation voltage VCE (sat) IC = 500 mA, IB = 50 mA 1.5 V
Base-emitter voltage VBE VCE = 5 V, IC = 5 mA 0.45 0.75 V
Transition frequency fT VCE = 5 V, IC = 200 mA 15 50 MHz
Collector output capacitance Cob VCB = 10 V, IE = 0, f = 1 MHz 35 pF

Note: hFE classification R: 60 to 120, O: 100 to 200

Marking

A1013 Part No. (or abbreviation code)

Lot No.

Characteristics A line indicates


lead (Pb)-free package or
indicator
lead (Pb)-free finish.

2 2006-11-09
2SA1013

IC VCE hFE IC
1.0 300
12
15 Common emitter

10 Ta = 25C
0.8
(A)

100

DC current gain hFE


8 10
Collector current IC

0.6 5
6 50
VCE = 2 V
4.5 30
0.4

2
0.2
10
IB = 1 mA Common emitter
0 Ta = 25C
0 5
0 4 8 12 16 20 24 28 10 30 100 300 1000

Collector-emitter voltage VCE (V) Collector current IC (A)

hFE IC VCE (sat) IC


300 3
Common emitter
Collector-emitter saturation voltage

Ta = 100C Ta = 25C
25 1
100
DC current gain hFE

VCE (sat) (V)

0 0.5
50
0.3
30

0.1
IC/IB = 10
10 5
Common emitter 0.05
VCE = 10 V
VCE = 5 V
0.03
5 5 10 30 100 300 1000
10 30 100 300 1000
Collector current IC (A)
Collector current IC (mA)

IC VBE
VCE (sat) IC
1.0
3
Common emitter
Common emitter
VCE = 5 V
Collector-emitter saturation voltage

IC/IB = 10 0.8
1
(A)

Ta = 100C
VCE (sat) (V)

0.5 0.6
25
Collector current IC

0.3 0

0.4

Ta = 100C
0.1
0.2

0.05 25
0
0.03 0
5 10 30 100 300 1000 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4

Collector current IC (A) Base-emitter voltage VBE (V)

3 2006-11-09
2SA1013

fT IC Cob VCB
300 300

Collector output capacitance Cob (pF)


Common emitter
f = 1 MHz
Transition frequency ft (MHz)

Ta = 25C
100 100
VCE = 5 V
50 50
2
30 30

10 10
Common emitter
5 5
Ta = 25C
3 3
-1 3 10 30 100 300 -1 3 10 30 100 300

Collector current IC (A) Collector-base voltage VCE (V)

Safe Operating Area


3
IC max (pulsed)*

1 ms*
10 ms*
1 100 ms*

0.5
(A)

0.3 Thermal limited


Collector current IC

0.1
S/B limited
IC max = 1.0 A
0.05 DC operation
Ta = 25C
0.03 VCEO max

*: Single nonrepetitive pulse


0.01 Ta = 25C

Curves must be derated linearly


with increase in temperature.
0.003

1 3 10 30 100 300
Collector-emitter voltage VCE (V)

4 2006-11-09
2SA1013

RESTRICTIONS ON PRODUCT USE 20070701-EN

The information contained herein is subject to change without notice.

TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the Handling Guide for Semiconductor Devices, or TOSHIBA Semiconductor Reliability
Handbook etc.

The TOSHIBA products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,
etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or
bodily injury (Unintended Usage). Unintended Usage include atomic energy control instruments, airplane or
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his
document shall be made at the customers own risk.

The products described in this document shall not be used or embedded to any downstream products of which
manufacture, use and/or sale are prohibited under any applicable laws and regulations.

The information contained herein is presented only as a guide for the applications of our products. No
responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which
may result from its use. No license is granted by implication or otherwise under any patents or other rights of
TOSHIBA or the third parties.

Please contact your sales representative for product-by-product details in this document regarding RoHS
compatibility. Please use these products in this document in compliance with all applicable laws and regulations
that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses
occurring as a result of noncompliance with applicable laws and regulations.

5 2006-11-09

You might also like