50P

You might also like

You are on page 1of 2
CE Definition - Principle LEM CURRENT TRANSDUCERS Module LTA 50-P/SP1 (istantaneous Outputs) ‘The LEM type LTA 50-P/SP1 is a transducer employing the Hall effect to measure DC and complex waveform AC currents in anon invasive manner. Galvanic isolation is provided between the primary (measured) and the analogue output (control) signal. AA feature of the LTA 50-P/SP1 is the direct provision of either a current or voltage output. Electrical Data Nominal current I 1, Current Output Measuring range Overall accuracy (at + 25°C) 2, Voltage Output ‘Measuring range Overall accuracy (at + 25°C) Tums ratio Supply voltage Isolation Accu mamic Performance Zero drift (0°C to 70°C) Linearity difdt followed accurately Response time Frequency range General Data Operating temperature Storage temperature Current consumption Internal Resistance Case material Weight Connections Primary Circuit Secondary circuit Polarity markings Output Provisions Current Output Voltage Output Issue2 24/03/97 DB LTASIP LEM HEME LIMITED 1 PERRET PLAGE . WEST PIMEO, SKELVERSOALE LANCASHRE WIN SK, UNTED KINGDOM SOAmps rms ImA/Amp 0 to + 160 Amps (Supply at #15 V, Rees =50.2) £05 %ofly 100mV/Amp 0 tos 50 Amps £10 %ofly 1: 1000 £15 V#5% 3kVims /SOHz /1 min. 40.6 mA maximum £0.1% of ly > 50 Amps per microsecond

You might also like