Professional Documents
Culture Documents
Danfoss A/S High Pressure Pumps Nordborgvej 81, D25 DK - 6430 Nordborg Denmark Phone: +45 7488 4024 Telefax: +45 7445 3831
Email: Waterpumps@danfoss.com www.ro-solutions.com www.isave.danfoss.com
DKCFN.PB.003.E1.02 / 521B1106_Sep2014
HIGH PRESSURE PUMPS www.isave.danfoss.com
When youre working within the Installation is also much simpler, Naturally, sourcing both pump and
constraints of a container, the size of with everything contained within ERD from one source offers many
every component really matters the one item of equipment advantages
the membrane reject flow and transfers it directly pump applications for the shipping, offshore and hospitality
High-pressure positive displacement booster Motor segments.
to the membrane feed flow. With its built-in high- pump Booster
pressure positive displacement booster pump and Electric motor pump Booster
electric motor, the iSave automatically controls pump
high-pressure flow without the use of separate
Pressure
flow meters to ensure constant and reliable high- exchanger
pressure feed to the RO membrane. Its simple, Pressure
reliable and fully automatic. Due to near-perfect Best-in-class total costs of ownership exchanger
Simple to install Simple to use Simply reliable
energy transfer, which in many cases reaches up
to 95% efficiency, net energy consumption can be
No need for costly high-pressure flow meters The smallest footprint available in isobaric ERD No risk of overflow/overspin at start-up or during Rotor and other key components in corrosion-
reduced by up to 60% compared to systems not
Highly efficient energy recovery up to 95% net operation resistant Super-Duplex
using energy recovery. Compact solution gives greater design flexibility
transfer and easier installation Motor-controlled rotor spin: flow controlled by Low-pressure shaft seal with long lifetime
kWh savings of up to 60% compared to electric motor
But energy costs are not all that the iSave reduces. 1 unit instead of 3 as in other isobaric ERD Provides constant flow despite changes in feed
The iSave also enables designers to specify smaller, applications without ERD systems Fail-safe operation ideal for staff of varying skill water salinity or temperature
less costly high-pressure pumps in SWRO systems. Reduces size and costs of high-pressure pump levels
And it helps them save space. Simple system design cuts use of stainless steel
piping and fittings
Permate No better way to deal with fluctuation in feedwater salinity and temperature
APP high-
pressure
pump High- In many circumstances, an SWRO Significant variations in feedwater concentrate line. The iSave eliminates
pressure
iSave range feed plant draws on feedwater that salinity complicate the life of an this problem by using a positive
Wherever simplicity and Low-pressur
e
space matter feed varies significantly in temperature SWRO plant, as higher salinity displacement pump as booster
High-pressur
Product Flow range Pressure range Efficiency (1) Available The unique iSave construction e
brine and salinity. For example, a cruise requires higher pressure. pump. No matter where SWRO takes
enables engineers to configure RO
iSave 21 7-21 m3/h 10-82 BAR up to 93% NOW systems that are simpler, smaller ship travelling in open ocean water place, in highly salty or more brackish
Low-pressur
iSave 40 22-40 m3/h 10-82 BAR up to 93% NOW and easier to operate than any flow meter e uses feedwater of 3.5% salinity. The Salinity variations present particular waters, the iSave automatically
other available today. Together
with compact APP high-pressure same ship, upon entering the Baltic challenges to isobaric ERDs, maintains constant flow.
pumps, the space-saving iSave Low-pressur Sea, will find salinity of just 0.7%. resulting in uneven flows in the
Low-pressur brine e
ERD produces more fresh water feed pump e
per square meter than any other
(1)
including high-pressure booster pump system on the market.