Application of the Revised Design Charts for Steep
Reinforced Slopes
Richard. A. Jewell MA, PhD, CEng, MICE
University of Oxtord
January 1990
Report No. OUEL 1796/89
Soil Mechanics Report No. 096/89
Developed for
AKZO Industrial Systems bv
‘Arnhem, Holland
Also to be published during 1990 in
Geotextiles and GeomembranesTable of Contents
1 Introduction
2 Definition of parameters
3 Design values for parameters
3.1 Soil properties ..
3.2 Reinforcement material prop.
3.3 Interaction parameters
Direct sliding coefficient
Bond coefficient
4 Steps for simplified design
5 Worked examples ..
5.1 Design example 1
Data and Design values
Design steps ..
5.2 Design example
Data and Design values
Design steps «.
6 Tips and useful notes for design
6.1 Tip for rapid preliminary estimates
6.2 Tip for reinforcement selection
6.3 Tip on bond allowance ..
6.4 Note on allowable force and spacing
.5 Note on direct sliding in flatter slopes
6.6 Note on wrap around facing
6.7 Note on compaction stresses
7 Concluding remarks
Notation ....