ANALYSIS OF SELF SUPPORTED STEEL
CHIMNEY AS PER INDIAN STANDARD
A thesis
Submitted by
Kirtikanta sahoo
(210CE2262)
Inpatial fulfilment of the requirements
‘fr the award of the degree of
Master of Technology
In
Civil Engineering
(Structural Engineering)
Under The Guidance of
Dr. Pradip Sarkar
&
Dr. AV Asha
Department of Civil Engineering
National Institute of Technology Rourkela
Orissa -769008, India
May 2012NATIONAL INSTITUTE OF TECHNOLOGY
ROURKELA, ORISSA -769008, INDIA
This is to certify that the thesis entitled, “ANALYSIS OF SELF SUPPORTED
STEEL CHIMNEY AS PER INDIAN STANDARD” submitted by Kirtikanta
Sahoo in partial fulfillment of the requirement for the award of Master of
Technology degree in Civil Engineering with specialization in Structural
Engineering at the National Institute of Technology Rourkela is an authentic work
carried out by her under our supervision and guidance. To the best of our knowledge,
the matter embodied in the thesis has not been submitted to any other
University/Institute for the award of any degree or diploma,
Research Guide
Place: Rourkela Dr. Pradip Sarkar Dr. AV Asha
Date Associate Professors
Department of Civil Engineering
NIT RourkelaACKNOWLEDGEMENTS
First and foremost, praise and thanks goes to my God for the blessing that has bestowed upon me
inall my endeavors.
Tam deeply indebted to Dr. Pradip Sarkar, Associate Professor of Structural Engineering
Division, my advisor and guide, for the motivation, guidance, tutelage and patience throughout
the research work. I appreciate his broad range of expertise and attention to detail, as well as the
constant encouragement he has given me over the years. There is no need to mention that a big
part of this thesis is the result of joint work with him, without which the completion of the work
‘would have been impossible.
Tam grateful to Prof. N Roy, Head, Department of Civil Engineering for his valuable suggestions
during the synopsis meeting and necessary facilities for the research work
J extend my sincere thanks to Dr. Robin Davis P the faculty members of Structural Engineering
Division for their helpful comments and encouragement for this work
Tam grateful for friendly atmosphere of the Structural Engineering Division and all kind and
helpful professors that I have met during my course
I would like thank my parents and sister. Without their lave, patience and support, I could
not have completed this work.
Finally, I wish to thank many friends for the encouragement during these difficult years,
especially, Saine Sikta, Snehash, Avadhoot, Haran,
Kirtikanta Sahoo