You are on page 1of 4

CE1_re: sv8-pod-g14.englab.juniper.

net 15746

set interface ge-0/0/0 vlan-tagging


set interface ge-0/0/0 unit 0 vlan-id 800
set interface ge-0/0/0 unit 0 family inet address 100.0.0.1/24
set interface lo0 unit 0 family inet address 100.1.1.1/32
set protocol ospf area 0.0.0.0 interface ge-0/0/0.0
set protocol ospf area 0.0.0.0 interface lo0.0

CE2_re: sv8-pod-g09.englab.juniper.net 15723

set interface ge-0/0/0 vlan-tagging


set interface ge-0/0/0 unit 0 vlan-id 800
set interface ge-0/0/0 unit 0 family inet address 100.0.0.2/24
set interface lo0 unit 0 family inet address 100.2.2.2/32
set protocol ospf area 0.0.0.0 interface ge-0/0/0.0
set protocol ospf area 0.0.0.0 interface lo0.0

CE3_re: sv8-pod-g23.englab.juniper.net 15832

set interface ge-0/0/0 vlan-tagging


set interface ge-0/0/0 unit 0 vlan-id 800
set interface ge-0/0/0 unit 0 family inet address 100.0.0.3/24
set interface lo0 unit 0 family inet address 100.3.3.3/32
set protocol ospf area 0.0.0.0 interface ge-0/0/0.0
set protocol ospf area 0.0.0.0 interface lo0.0

PE1_re: sv8-pod-c17.englab.juniper.net 15588

set interface ge-0/0/0 vlan-tagging


set interface ge-0/0/0 encapsulation vlan-vpls
set interface ge-0/0/0 unit 0 vlan-id 800
set interface ge-0/0/0 unit 0 encapsulation vlan-vpls
set interface ge-0/0/0 unit 0 family vpls
set interface xe-0/2/0 unit 0 family inet address 10.1.1.1/30
set interface xe-0/2/0 unit 0 family mpls
set interface lo0 unit 0 family inet address 1.1.1.1/32
set interface lo0 unit 0 family mpls
set protocol mpls interface xe-0/2/0.0
set protocol mpls interface lo0.0
set protocol rsvp interface xe-0/2/0.0
set protocol rsvp interface lo0.0
set protocol mpls label-switched-path TO_PE2 to 2.2.2.2
set protocol mpls label-switched-path TO_PE2 bandwidth 10m
set protocol mpls label-switched-path TO_PE2 primary PRI
set protocol mpls label-switched-path TO_PE2 secondary SEC
set protocol mpls label-switched-path TO_PE3 to 3.3.3.3
set protocol mpls label-switched-path TO_PE3 bandwidth 10m
set protocol mpls label-switched-path TO_PE3 primary PRI
set protocol mpls label-switched-path TO_PE3 secondary SEC
set protocol mpls path PRI
set protocol mpls path SEC
set routing-options router-id 1.1.1.1
set routing-options autonomous-system 65001
set routing-instance VPLS_VPN_A instance-type vpls
set routing-instance VPLS_VPN_A interface ge-0/0/0.0
set routing-instance VPLS_VPN_A route-distinguisher 8500:101
set routing-instance VPLS_VPN_A vrf-target target:100:100
set routing-instance VPLS_VPN_A protocol vpls site-range 8
set routing-instance VPLS_VPN_A protocol vpls no-tunnel-services
set routing-instance VPLS_VPN_A protocol vpls site CE1 site-identifier 1
set protocol bgp group VPLS_PEER type internal
set protocol bgp group VPLS_PEER local-address 1.1.1.1
set protocol bgp group VPLS_PEER neighbor 3.3.3.3
set protocol bgp group VPLS_PEER neighbor 2.2.2.2
set protocol bgp group VPLS_PEER family l2vpn signaling
set protocol ospf area 0.0.0.0 interface xe-0/2/0.0
set protocol ospf area 0.0.0.0 interface lo0.0

PE2_re0: sv8-pod-g07.englab.juniper.net 15814

set interface ge-0/0/0 vlan-tagging


set interface ge-0/0/0 encapsulation vlan-vpls
set interface ge-0/0/0 unit 0 vlan-id 800
set interface ge-0/0/0 unit 0 encapsulation vlan-vpls
set interface ge-0/0/0 unit 0 family vpls
set interface xe-0/2/0 unit 0 family inet address 10.2.2.1/30
set interface xe-0/2/0 unit 0 family mpls
set interface lo0 unit 0 family inet address 2.2.2.2/32
set interface lo0 unit 0 family mpls
set protocol mpls interface xe-0/2/0.0
set protocol mpls interface lo0.0
set protocol rsvp interface xe-0/2/0.0
set protocol rsvp interface lo0.0
set protocol mpls label-switched-path TO_PE1 to 1.1.1.1
set protocol mpls label-switched-path TO_PE1 bandwidth 10m
set protocol mpls label-switched-path TO_PE1 primary PRI
set protocol mpls label-switched-path TO_PE1 secondary SEC
set protocol mpls label-switched-path TO_PE3 to 3.3.3.3
set protocol mpls label-switched-path TO_PE3 bandwidth 10m
set protocol mpls label-switched-path TO_PE3 primary PRI
set protocol mpls label-switched-path TO_PE3 secondary SEC
set protocol mpls path PRI
set protocol mpls path SEC
set routing-options router-id 2.2.2.2
set routing-options autonomous-system 65001
set routing-instance VPLS_VPN_A instance-type vpls
set routing-instance VPLS_VPN_A interface ge-0/0/0.0
set routing-instance VPLS_VPN_A route-distinguisher 8500:102
set routing-instance VPLS_VPN_A vrf-target target:100:100
set routing-instance VPLS_VPN_A protocol vpls site-range 8
set routing-instance VPLS_VPN_A protocol vpls no-tunnel-services
set routing-instance VPLS_VPN_A protocol vpls site CE2 site-identifier 2
set protocol bgp group VPLS_PEER type internal
set protocol bgp group VPLS_PEER local-address 2.2.2.2
set protocol bgp group VPLS_PEER neighbor 3.3.3.3
set protocol bgp group VPLS_PEER neighbor 1.1.1.1
set protocol bgp group VPLS_PEER family l2vpn signaling
set protocol ospf area 0.0.0.0 interface xe-0/2/0.0
set protocol ospf area 0.0.0.0 interface lo0.0

PE3_re0: sv8-pod-g17.englab.juniper.net 15772

set interface ge-0/0/0 vlan-tagging


set interface ge-0/0/0 encapsulation vlan-vpls
set interface ge-0/0/0 unit 0 vlan-id 800
set interface ge-0/0/0 unit 0 encapsulation vlan-vpls
set interface ge-0/0/0 unit 0 family vpls
set interface xe-0/2/0 unit 0 family inet address 10.3.3.1/30
set interface xe-0/2/0 unit 0 family mpls
set interface lo0 unit 0 family inet address 3.3.3.3/32
set interface lo0 unit 0 family mpls
set protocol mpls interface xe-0/2/0.0
set protocol mpls interface lo0.0
set protocol rsvp interface xe-0/2/0.0
set protocol rsvp interface lo0.0
set protocol mpls label-switched-path TO_PE2 to 2.2.2.2
set protocol mpls label-switched-path TO_PE2 bandwidth 10m
set protocol mpls label-switched-path TO_PE2 primary PRI
set protocol mpls label-switched-path TO_PE2 secondary SEC
set protocol mpls label-switched-path TO_PE1 to 1.1.1.1
set protocol mpls label-switched-path TO_PE1 bandwidth 10m
set protocol mpls label-switched-path TO_PE1 primary PRI
set protocol mpls label-switched-path TO_PE1 secondary SEC
set protocol mpls path PRI
set protocol mpls path SEC
set routing-options router-id 3.3.3.3
set routing-options autonomous-system 65001
set routing-instance VPLS_VPN_A instance-type vpls
set routing-instance VPLS_VPN_A interface ge-0/0/0.0
set routing-instance VPLS_VPN_A route-distinguisher 8500:103
set routing-instance VPLS_VPN_A vrf-target target:100:100
set routing-instance VPLS_VPN_A protocol vpls site-range 8
set routing-instance VPLS_VPN_A protocol vpls no-tunnel-services
set routing-instance VPLS_VPN_A protocol vpls site CE3 site-identifier 3
set protocol bgp group VPLS_PEER type internal
set protocol bgp group VPLS_PEER local-address 3.3.3.3
set protocol bgp group VPLS_PEER neighbor 2.2.2.2
set protocol bgp group VPLS_PEER neighbor 1.1.1.1
set protocol bgp group VPLS_PEER family l2vpn signaling
set protocol ospf area 0.0.0.0 interface xe-0/2/0.0
set protocol ospf area 0.0.0.0 interface lo0.0

P_re0: sv8-pod-g12.englab.juniper.net 15727

set interface xe-0/2/0 unit 0 family inet address 10.1.1.2/30


set interface xe-0/2/0 unit 0 family mpls
set interface xe-0/2/1 unit 0 family inet address 10.2.2.2/30
set interface xe-0/2/1 unit 0 family mpls
set interface xe-0/3/0 unit 0 family inet address 10.3.3.2/30
set interface xe-0/3/0 unit 0 family mpls
set interface lo0 unit 0 family inet address 4.4.4.4/32
set interface lo0 unit 0 family mpls
set routing-options router-id 4.4.4.4
set routing-options autonomous-system 65001
set protocol mpls interface xe-0/2/0.0
set protocol mpls interface xe-0/2/1.0
set protocol mpls interface xe-0/3/0.0
set protocol mpls interface lo0.0
set protocol rsvp interface xe-0/2/0.0
set protocol rsvp interface xe-0/2/1.0
set protocol rsvp interface xe-0/3/0.0
set protocol rsvp interface lo0.0
set protocol ospf area 0.0.0.0 interface xe-0/2/0.0
set protocol ospf area 0.0.0.0 interface xe-0/2/1.0
set protocol ospf area 0.0.0.0 interface xe-0/3/0.0
set protocol ospf area 0.0.0.0 interface lo0.0

You might also like