You are on page 1of 32

MULTIFLO

A USTR AL IA Pty
Ltd

Product Catalogue
M U LTI F LO P U M PS
PS
By MULTIFLO AUSTRALIA Pty. Ltd.

MULTIFLO offers a high quality range of products. These include the


MULTIFLO range of vacuum primed diesel and electric driven pump sets
that can be custom-built to ensure the very best performance for your
operation, and survive under the toughest of operating conditions.

MULTIFLO Pump Units were first produced in 1976, designed and


manufactured to provide a better and more reliable alternative to efficiently
pump clean the open cut coal mining pits at the time. To secure a market
place, formation of a pump hire division was put in place using products ex
works, this enabled the company to be actively involved with development and
requirements of setting in place mine pit dewatering systems in the open cut
mining area.

Having achieved this mark, MULTIFLO entered into the open cut mining
industry with a range of diesel and electric driven vactronicTM vacuum primed
pump sets capable of pumping not only water against high head situations, but
also large quantities of slurry from the open pits.

Further information on the company and products may be obtained by


contacting the Caloundra office, thus enabling our office to connect you with
the MULTIFLO representative best able to work with you on your project.

MULTIFLO HEAD OFFICE


Multiflo Australia Pty Ltd
4 Daniel Street, Caloundra QLD 4551
P O Box 3580, Caloundra D.C. QLD 4551
AUSTRALIA
Ph: 07 5491 2877
Fax: 07 5491 2805
Email: multiflo@multiflo.com.au
Website: www.multiflo.com.au

Page 1 Multiflo Pump Products Catalogue


M U LTI F LO P U M PS
PS
By MULTIFLO AUSTRALIA Pty. Ltd.

Model: M/FV-360S-SS Model: MFV-W390S


Owner: PT Petrosea Owner: Kelian

Model: MFV-360BP Model: MFC-385


Owner: Pama Owner: Coateson site

Model: MFV-W390BP-CH Model: MFC-420B


Owner: KPC Owner: Banpu

Model: MFV-W390BP Model: MFC-385


Owner: Blair Athol Owner: Coates Shorco Sykes

Page 2 Multiflo Pump Products Catalogue


M U LTI F LO P U M PS
PS
By MULTIFLO AUSTRALIA Pty. Ltd.

MODEL MFC-
MFC-120

GENERAL INFORMATION CONSTRUCTION


100 x 100 single stage centrifugal Pump Casing - Cast Iron
Type 120MS Impeller - Stainless Steel
Frame Size - 2A Shaft - 431 Stainless Steel
Seal - Mechanical ** For aggressive water applications, all wetted
Passage Size - 50 mm parts are available in stainless steel

ENGINE OPTIONS PERFORMANCE


Caterpillar 3024 - 23 kW Maximum Flowrate - 60 litres per second
Deutz F3L1011F - 23 kW Shutoff Head - 36 metres
Hatz 2L41C - 18.8 kW (Max 1800RPM)

DIMENSIONS/CAPACITIES/WEIGHTS
Height - 1135 mm
Length - 2250 mm
Width - 1000 mm
Weight Dry - 1140 kg
Weight Wet - 1300 kg
Fuel Capacity - 160 litres

Page 3 Multiflo Pump Products Catalogue


M U LTI F LO P U M PS
PS
By MULTIFLO AUSTRALIA Pty. Ltd.

PERFORMANCE CURVE
MULTIFLO 120

Page 4 Multiflo Pump Products Catalogue


M U LTI F LO P U M PS
PS
By MULTIFLO AUSTRALIA Pty. Ltd.

MODEL MFC-
MFC-140

GENERAL INFORMATION CONSTRUCTION

150 x 150 single stage centrifugal Pump Casing - Cast Iron


Type 140MS Impeller - Stainless Steel
Frame Size - 4A Shaft - 431 Stainless Steel
Seal - Gland Packing or Mechanical Seal ** For aggressive water applications, all wetted
Passage Size - 50 mm parts are available in stainless steel

ENGINE OPTIONS PERFORMANCE


Caterpillar 3054 - 49 kW Maximum Flowrate - 80 litres per second
Cummins B3,3-65 - 36 kW Shutoff Head - 50 metres
Deutz F3L912 - 30 kW (Max 1800RPM)
Hatz 3L41C - 30 kW (Max 1800RPM)

DIMENSIONS/CAPACITIES/WEIGHTS
Height - 1470 mm
Length - 2800 mm
Width - 1132 mm
Weight Dry - 1650 kg
Weight Wet - 2230 kg
Fuel Capacity - 580 litres

Page 5 Multiflo Pump Products Catalogue


M U LTI F LO P U M PS
PS
By MULTIFLO AUSTRALIA Pty. Ltd.

PERFORMANCE CURVE
MULTIFLO 140

Page 6 Multiflo Pump Products Catalogue


M U LTI F LO P U M PS
PS
By MULTIFLO AUSTRALIA Pty. Ltd.

MODEL MFC-
MFC-160

GENERAL INFORMATION CONSTRUCTION

150 x 150 single stage centrifugal Pump Casing - Cast Iron


Type 160 Impeller - Stainless Steel
Frame Size - 4A Shaft - 431 Stainless Steel
Seal - Gland Packing or Mechanical Seal ** For aggressive water applications, all wetted
Passage Size - 50 mm parts are available in stainless steel
ENGINE OPTIONS PERFORMANCE
Caterpillar 3054NA - 51 kW Maximum Flowrate - 90 litres per second
Cummins B3,3T - 49 kW Shutoff Head - 55 metres
Deutz F4L912 - 41 kW (Max 1800RPM)
Hatz 4L41C - 42 kW (Max 1800RPM)

DIMENSIONS/CAPACITIES/WEIGHTS
Height - 1470 mm
Length - 2800 mm
Width - 1132 mm
Weight Dry - 1650 kg
Weight Wet - 2230 kg
Fuel Capacity - 580 litres

Page 7 Multiflo Pump Products Catalogue


M U LTI F LO P U M PS
PS
By MULTIFLO AUSTRALIA Pty. Ltd.

PERFORMANCE CURVE
MULTIFLO 160

Page 8 Multiflo Pump Products Catalogue


MU LTIFL
U LTI F LO
O P UPMU
PSM PS
PS
By MULTIFLO
By AUSTRALIA Pty.Ltd.
Pty. Ltd.

MODEL MFC-
MFC-180

GENERAL INFORMATION CONSTRUCTION

200 x 200 single stage centrifugal Pump Casing - Cast Iron


180G Impeller - Stainless Steel
Frame Size - 5AA Shaft - 431 Stainless Steel
Gland Conventional packed, oil lubricated ** For aggressive water applications, all wetted
Using a controlled drip feed system parts are available in stainless steel
Passage Size - 25 mm

ENGINE OPTIONS PERFORMANCE


Caterpillar 3056T - 110 kW Maximum Flowrate - 140 litres per second
Cummins 6BTA5.9 - 101 kW Shutoff Head - 55 metres

DIMENSIONS/CAPACITIES/WEIGHTS
Height - 1675 mm
Length - 3450 mm
Width - 1495 mm
Weight Dry - 2900 kg
Weight Wet - 4000 kg
Fuel Capacity - 1100 litres

Page 9 Multiflo Pump Products Catalogue


MU LTIFL
U LTI F LO
O P UPMU
PSM PS
PS
By MULTIFLO
By AUSTRALIA Pty.Ltd.
Pty. Ltd.

PERFORMANCE CURVE
MULTIFLO 180

Page 10 Multiflo Pump Products Catalogue


MU LTIFL
U LTI F LO
O P UPMU
PSM PS
PS
By MULTIFLO
By AUSTRALIA Pty.Ltd.
Pty. Ltd.

MODEL MFC-
MFC-290

GENERAL INFORMATION CONSTRUCTION

200 x 150 single stage centrifugal Pump Casing - Cast Iron


Type 290MS Impeller - Stainless Steel
Frame Size - 5AA Shaft - 431 Stainless Steel
Seal - Gland or Mechanical
[Silicon Carbide/Tungsten] ** For aggressive water applications, all wetted
Passage Size - 45 mm parts are available in stainless steel

ENGINE OPTIONS PERFORMANCE

Caterpillar 3056TA - 110 kW Maximum Flowrate - 103 litres per second


Cummins 6BTA5.9 - 101 kW Shutoff Head - 85 metres

DIMENSIONS/CAPACITIES/WEIGHTS
Height - 1675 mm
Length - 3450 mm
Width - 1495 mm
Weight Dry - 2900 kg
Weight Wet - 4000 kg

Page 11 Multiflo Pump Products Catalogue


MU LTIFL
U LTI F LO
O P UPMU
PSM PS
PS
By MULTIFLO
By AUSTRALIA Pty.Ltd.
Pty. Ltd.

PERFORMANCE CURVE
MULTIFLO 290

Page 12 Multiflo Pump Products Catalogue


MU LTIFL
U LTI F LO
O P UPMU
PSM PS
PS
By MULTIFLO
By AUSTRALIA Pty.Ltd.
Pty. Ltd.

MODEL MFC-
MFC-345

GENERAL INFORMATION CONSTRUCTION

200 x 150 single stage centrifugal Pump Casing - Ultrachrome 28% Cr (A49)
Type 345G Impeller - Ultrachrome 28% Cr (A49)
Frame Size - FF Shaft - CS 1045 Carbon Steel
Gland Conventional packed, oil lubricated Sleeve Fully Hardened Type 420C
Using a controlled drip feed system. ** For aggressive water applications, all wetted
Passage Size 140 mm parts are available in stainless steel

ENGINE OPTIONS PERFORMANCE


Caterpillar 3406TA - 328 kW Maximum Flowrate - 260 litres per second
Cummins N14-450 - 317 kW (Max 1800 RPM) Shutoff Head - 106 metres

DIMENSIONS/CAPACITIES/WEIGHTS

Height - 3100 mm
Length - 5800 mm
Width - 2000 mm
Weight Dry - 9680 kg
Weight Wet - 12000 kg
Fuel Capacity - 2320 litres

Page 13 Multiflo Pump Products Catalogue


MU LTIFL
U LTI F LO
O P UPMU
PSM PS
PS
By MULTIFLO
By AUSTRALIA Pty.Ltd.
Pty. Ltd.

PERFORMANCE CURVE
MULTIFLO 345

Page 14 Multiflo Pump Products Catalogue


MU LTIFL
U LTI F LO
O P UPMU
PSM PS
PS
By MULTIFLO
By AUSTRALIA Pty.Ltd.
Pty. Ltd.

MODEL MFC-
MFC-360

GENERAL INFORMATION CONSTRUCTION

200 x 150 single stage centrifugal Pump Casing - T220 Grey Cast Iron
Type 360G Impeller - 316 Stainless Steel
Frame Size - 6A Shaft - 1040 Shaft Steel
Gland Seal Conventional packed, oil lubricated Shaft Sleeve 431 Stainless Steel
using a controlled drip feed system. ** For aggressive water applications, all wetted
Passage Size 45 mm parts are available in stainless steel

ENGINE OPTIONS PERFORMANCE


Caterpillar 3126TA - 166 kW Maximum Flowrate - 100 litres per second
Cummins 6CTA8.3 - 157 kW Shutoff Head - 126 metres

DIMENSIONS/CAPACITIES/WEIGHTS
Height - 2460 mm
Length - 5650 mm
Width - 1800 mm
Weight Dry - 6500 kg
Weight Wet - 7800 kg
Fuel Capacity - 1800 litres

Page 15 Multiflo Pump Products Catalogue


MU LTIFL
U LTI F LO
O P UPMU
PSM PS
PS
By MULTIFLO
By AUSTRALIA Pty.Ltd.
Pty. Ltd.

PERFORMANCE CURVE
MULTIFLO 360

Page 16 Multiflo Pump Products Catalogue


MU LTIFL
U LTI F LO
O P UPMU
PSM PS
PS
By MULTIFLO
By AUSTRALIA Pty.Ltd.
Pty. Ltd.

MODEL MFC-
MFC-380

GENERAL INFORMATION CONSTRUCTION

200 x 150 single stage centrifugal Pump Casing - T220 Cast Iron
Type 380G Impeller - 316 Stainless Steel
Frame Size - 6A Shaft - CS1040 Carbon Steel
Gland Seal Conventional packed, oil lubricated Sleeve 431 Stainless Steel
Using a controlled drip feed system. ** For aggressive water applications, all wetted
Passage Size - 45 mm parts are available in stainless steel

ENGINE OPTIONS PERFORMANCE


Caterpillar C9 @ 1700 RPM B Rating - 219 kW Maximum Flowrate - 155 litres per second
Cummins M11-350 @ 1700 RPM Shutoff Head - 110 metres
Water Management Rating - 229 kW

DIMENSIONS/CAPACITIES/WEIGHTS
Height - 2750 mm
Length - 5650 mm
Width - 1800 mm
Weight Dry - 6500 kg
Weight Wet - 7800 kg
Fuel Capacity - 1800 litres

Page 17 Multiflo Pump Products Catalogue


MU LTIFL
U LTI F LO
O P UPMU
PSM PS
PS
By MULTIFLO
By AUSTRALIA Pty.Ltd.
Pty. Ltd.

PERFORMANCE CURVE
MULTIFLO 380

Page 18 Multiflo Pump Products Catalogue


MU LTIFL
U LTI F LO
O P UPMU
PSM PS
PS
By MULTIFLO
By AUSTRALIA Pty.Ltd.
Pty. Ltd.

MODEL MFC-
MFC-385

GENERAL INFORMATION CONSTRUCTION

200 x 150 single stage centrifugal Pump Casing - T220 Cast Iron
Type 385G Impeller - 316 Stainless Steel
Frame Size - 6A Shaft - CS1040 Carbon Steel
Gland Seal Conventional packed, oil lubricated Sleeve 316 Stainless Steel
Using a controlled drip feed system. ** For aggressive water applications, all wetted
Passage Size - 45 mm parts are available in stainless steel

ENGINE OPTIONS PERFORMANCE


Caterpillar 3406TA - 328 kW Maximum Flowrate - 160 litres per second
Cummins N14-450 - 317 kW Shutoff Head - 130 metres

DIMENSIONS/CAPACITIES/WEIGHTS

Height - 3030 mm
Length - 5750 mm
Width - 2100 mm
Weight Dry - 5100 kg
Weight Wet - 6500 kg
Fuel Capacity - 1800 litres

Page 19 Multiflo Pump Products Catalogue


MU LTIFL
U LTI F LO
O P UPMU
PSM PS
PS
By MULTIFLO
By AUSTRALIA Pty.Ltd.
Pty. Ltd.

PERFORMANCE CURVE
MULTIFLO 385

Page 20 Multiflo Pump Products Catalogue


MU LTIFL
U LTI F LO
O P UPMU
PSM PS
PS
By MULTIFLO
By AUSTRALIA Pty.Ltd.
Pty. Ltd.

MODEL MFC-
MFC-390

GENERAL INFORMATION CONSTRUCTION

200 x 150 single stage centrifugal Pump Casing - Ultrachrome 28% Cr (A49)
Type 8/6 FF-HX Slurry Pump Impeller - Ultrachrome 28% Cr (A49)
Frame Size - FF Shaft - CS 1045 Carbon Steel
Gland Seal - Conventional packed, oil lubricated Sleeve Fully Hardened Type 420C
using a controlled drip feed method. ** For aggressive water applications, all wetted
Passage Size 65 mm parts are available in stainless steel

ENGINE OPTIONS PERFORMANCE

Caterpillar 3406TA - 328 kW Maximum Flowrate - 190 litres per second


Cummins N14-450 - 317 kW Shutoff Head - 120 metres

DIMENSIONS/CAPACITIES/WEIGHTS

Height - 2998 mm
Length - 6096 mm
Width - 2032 mm
Weight Dry - 9800 kg
Weight Wet - 13900 kg
Fuel Capacity - 4000 litres

Page 21 Multiflo Pump Products Catalogue


MU LTIFL
U LTI F LO
O P UPMU
PSM PS
PS
By MULTIFLO
By AUSTRALIA Pty.Ltd.
Pty. Ltd.

PERFORMANCE CURVE
MULTIFLO 390

Page 22 Multiflo Pump Products Catalogue


MU LTIFL
U LTI F LO
O P UPMU
PSM PS
PS
By MULTIFLO
By AUSTRALIA Pty.Ltd.
Pty. Ltd.

MODEL MFC-
MFC-420

GENERAL INFORMATION CONSTRUCTION

200 x 150 single stage centrifugal Pump Casing - Ultrachrome 28% Cr (A49)
Type 8/6 FF-HX Slurry Pump Impeller - Ni-Cr-Mo Steel (A25)
Frame Size - FF Shaft - CS 1045 Carbon Steel
Gland Seal - Conventional packed, oil lubricated Sleeve Fully Hardened Type 420C
using a controlled drip feed system. ** For aggressive water applications, all wetted
Passage Size - 50 mm parts are available in stainless steel

ENGINE PERFORMANCE
Caterpillar 3412 DITTA Maximum Flowrate - 273 litres/second
Shutoff Head - 150 metres
DIMENSIONS/CAPACITIES/WEIGHTS

Height - 3378 mm
Length - 7500 mm
Width - 2400 mm
Weight Dry - 12260 kg
Weight Wet - 16260 kg
Fuel Capacity - 4012 litres

Page 23 Multiflo Pump Products Catalogue


MU LTIFL
U LTI F LO
O P UPMU
PSM PS
PS
By MULTIFLO
By AUSTRALIA Pty.Ltd.
Pty. Ltd.

PERFORMANCE CURVE
MULTIFLO 420

Page 24 Multiflo Pump Products Catalogue


MU LTIFL
U LTI F LO
O P UPMU
PSM PS
PS
By MULTIFLO
By AUSTRALIA Pty.Ltd.
Pty. Ltd.

Trailer Chassis

The trailer chassis is designed to be bolted on to any of the Multiflo pump units.

The trailer chassis is designed to be towed with the correct size vehicle to suit the
weight and size of the pump unit. The trailer chassis enables the pump unit to be
moved from one pumping location to another with ease.

The trailer chassis is fitted with the following items:-

Dual heavy duty axle


The correct wheels to suit the size and weight of the pump unit
Brakes can be
electrical or
mechanical
(optional)

Page 27 Multiflo Pump Products Catalogue


MU LTIFL
U LTI F LO
O P UPMU
PSM PS
PS
By MULTIFLO
By AUSTRALIA Pty.Ltd.
Pty. Ltd.

Heavy Duty Skid Chassis

The heavy duty skid chassis is designed to be bolted on to any of the Multiflo pump
units.

The skid chassis is designed to be pushed around with bull dozers or excavators. The
skid runners enable pump units to be mounted on the heavy duty
chassis and be towed from one pumping location to
another on minesite.

The heavy duty skid chassis is fitted


with the following items:-

Runners fabricated from rectangular


hollow section (RHS)
Four lifting points
Two tow lugs
Supa alloy tow chains
Replaceable wear plate
Heavy duty pushbar

Page 28 Multiflo Pump Products Catalogue


MU LTIFL
U LTI F LO
O P UPMU
PSM PS
PS
By MULTIFLO
By AUSTRALIA Pty.Ltd.
Pty. Ltd.

Skid Mounted Pontoon

The heavy duty skid mounted pontoon unit is designed to float any of the Multiflo pump
units. The pontoon is designed to be pushed with bull dozers or excavators.

The skid runners enable pump units mounted on the heavy duty pontoon to be towed
from one pumping location to another on minesite.

The heavy duty skid mounted pontoon is fitted with following items:-

Skid runners fabricated from rectangular hollow section (RHS)


Four lifting points
Two tow lugs
Supa alloy tow chains
Replaceable wear plate
Heavy duty pushbar

Page 29 Multiflo Pump Products Catalogue


MU LTIFL
U LTI F LO
O P UPMU
PSM PS
PS
By MULTIFLO
By AUSTRALIA Pty.Ltd.
Pty. Ltd.

Suction Boom Kit


The Suction Boom is designed to control the pump unit suction hose while pumping and
when moving from one pumping location to another on mine site.

The boom is completely hot dip galvanised and is fitted with Supa Alloy support chains
coupled to the chassis. The winch is fixed to a holding point on the chassis and supplied
with 16 metres of 6mm wire rope.

Page 30 Multiflo Pump Products Catalogue


MU LTIFL
U LTI F LO
O P UPMU
PSM PS
PS
By MULTIFLO
By AUSTRALIA Pty.Ltd.
Pty. Ltd.

Model: MFV-W420-BP
Owner: PT Kelian Model: MFC-385S
Owner: PT Newmont

Model: MFV-160C Model: MFV-140S


Owner: PT ArutminSenakin Owner: PT Indo Muro

Model: ME-W420P Model: MFC-290


Owner: Gold Ridge Mine Owner: CAT Rental Store

Model: MFV340B Model: MCL-140


Owner: PT Pamapersada Owner: Coates Shorco Sykes

Page 31 Multiflo Pump Products Catalogue Revised 04/05


MU LTIFL
U LTI F LO
O P UPMU
PSM PS
PS
By MULTIFLO
By AUSTRALIA Pty.Ltd.
Pty. Ltd.

Multiflo Head OFFICE

MULTIFLO AUSTRALIA PTY LTD

Address: 4 Daniel Street


Caloundra 4551 Queensland
AUSTRALIA

Postal Address: P O Box 3580


Caloundra Delivery Centre
Caloundra 4551 Queensland
AUSTRALIA

Telephone: 617 5491 2877

Fax: 617 5491 2805

Email: multiflo@multiflo.com.au

Website: www.multiflo.com.au

Contacts: Mr Bryan Fulwood General Manager

Mr Peter Smit Project Engineer

Mr Geoff Way Product Sales Support

Mr Lincoln Shaw Product Support

Mr John Emms Technical Advisor (Nth Qld)

Mr Darin Lusk Accounts Administrator

Revised 04/05

Page 32 Multiflo Pump Products Catalogues


Disclaimer: Multiflo Australia Pty Ltd will not be liable for any claims or damages arising out of or in
respect to the supply and or manufacture of this product including, but not limited to, claims for
faulty design, negligent or misleading advice, damages arising from loss or use of its products,
and any direct, special or consequential damages or injury to any person, corporation or other entity.

You might also like