Professional Documents
Culture Documents
MC Toolkit Installation Instructions: Document
MC Toolkit Installation Instructions: Document
Installation Instructions
Document
Form: 34-ST-33-58
Effective: 10/10
Supersedes: 8/08
Summary
This instruction is to aid you in the installation of a replacement MC Toolkit.
Installing the MC Toolkit software components from the CD ROM (51453286-501) to the PDA
Pre-requisites:
Active Sync/Mobile Device Center
If you are running Windows XP, download ActiveSync 4.1 or above from the Microsoft Web site and install it on
your PC
If you are running Windows Vista or Windows 7, download Windows Mobile Device Center version 6.1 or above
from the Microsoft Web site and install it on your PC.
OS Version:
You need Microsoft Windows Mobile Version 5.0 OS on the PDA. Verify this by selecting
Start/Setting/System/About on the PDA
The qualified PDA Model IDs are HP iPAQ hx2490b and hx2490c. Verify this by selecting
Start/Settings/System/HP Asset Viewer
SD Card: At least 1GB memory on the SD Card
Step Action
A. Honeywell MC Toolkit
B. Honeywell CFG_MCT
C. Honeywell FDC
D. Honeywell SDC
E. Honeywell ModemCodeDownload
Steps:
2. Select the above programs one by one(If a program is not listed, that means it was
not installed on this PDA before)
3 Insert Loaded SD Card into the Host PDA. Select Start\File Explorer\My Device and locate the
SD Card folder. If it does not show up within 15-20 seconds after loading the SD Card, Soft
Reset the PDA again.
Page 2 of 6 34-ST-33-58
Replacement Installation Instructions MC Toolkit
Step Action
4 Before inserting the CD ROM into the drive, setup ActiveSync connection or Mobile Device
Center connection with the Desktop (For Help on this topic, refer the User manual 34ST25
20; Section Synchronization between PDA and PC)
5 If the desktop PC has any or all of the previously installed following programs, follow the steps
below to remove these programs from the PC.
A. MC Toolkit
B. ModemCodeDownload
Steps: Windows XP
1. Select Start/Settings/Control Panel/Add Remove Programs
2. Select the above programs one by one (If a program is not listed,
that means it was not installed on this PC before)
3. Select Change/Remove
4. On the "Welcome Dialog" select "Remove", click on Next.
5. Click Yes on "Do you want to completely remove..." prompt.
6 Insert the CD ROM into the CD ROM Drive. MCToolkit.bat file should execute automatically. If
it does not start automatically, open the CD ROM root drive and double click MCToolkit.bat file
MCToolkit Setup
7 MC Toolkit Setup launches first. Go through the prompts on the Installation screens.
On the Please check your mobile device screen to see if additional steps are necessary
screen, select ok. Continue with the next steps.
34-ST-33-49 Page 3 of 4
MC Toolkit Replacement Installation Instructions
Step Action
Select OK
11 Select Finish on the InstallShield Wizard Complete screen on the PC. Continue with the
next steps.
12 Wait until MC Toolkit Modem CodeDownload Setup launches Next. Go through the prompts
on the Installation screens.
On the Please check your mobile device screen to see if additional steps are necessary
screen, select ok. Continue with the next steps.
Select OK
16 Select Finish on the InstallShield Wizard Complete screen on the PC. Continue with the
next steps.
17 Wait until Microsoft .Net compact Framework 3.5 Setup launches Next. Go through the
prompts on the Installation screens. Select Complete option on the Setup Type screen.
On the Please check your mobile device screen to see if additional steps are necessary
screen, select ok. Continue with step the next steps.
Select OK
This completes the Installation of MC Toolkit. The installation creates 3 icons at the Start Menu or Start/Programs menu of the
PDA:
FDC
MCToolkit
ModemCodeDownload
Before you can use the MC Toolkit, make sure the Modem firmware version is 2.0 (you need Modem firmware version 2.0 and
above to use with MC Toolkit Release 4.0 and above)
Page 4 of 6 34-ST-33-58
Replacement Installation Instructions MC Toolkit
1 Double click the MCToolkitCodeDownload icon on the PDA. Code Download Homepage will
be displayed.
2 Select Modem Diagnostics under the Modem Menu. Modem Diagnostic screen will be
displayed
34-ST-33-49 Page 5 of 4
MC Toolkit Replacement Installation Instructions
Step Action
3 Check and verify that the Modem Firmware version field displays 2.0. If it is less than 2.0,
upgrade the modem firmware using the Instructions guide 34-ST-25-33 (Section: Upload /
Download Operations that is shipped with the MC Toolkit product. Make sure you complete
the Modem firmware upgrade before Connecting MC Toolkit to the devices
NOTE: There are 2 Optional batch files provided in the CD ROM should you need to install these
components separately for Maintenance purposes:
ModemCodeDownload.bat : Installs ModemCodeDownload only (Follow Steps 12 16 to install this
setup. The n Soft Reset the PDA)
DotNet3.5.bat : Installs .Net Compact Framework 3.5 only (Follow steps 17-21 to install this setup)
Page 6 of 6 34-ST-33-58