You are on page 1of 13

EncoderHD decoderprofessional NVR fast use manual

Catalogue

Chapeter 1 Product Introduction


Introduction.................................................................................................
................................................................................................. 2

1.1 The encoder's interface


interface.....................................................................................................
.....................................................................................................
.....................................................................................................22

1.2 The decoder's interface


interface.....................................................................................................
.....................................................................................................
.....................................................................................................33

1.3 professional NVR panel


panel.....................................................................................................
..................................................................................................... 4
.....................................................................................................4

Chapeter 2 Basic Operation


Operation..........................................................................................................
..........................................................................................................
..........................................................................................................55

2.1 Login
Login.......................................................................................................................................
.......................................................................................................................................
.......................................................................................................................................55

2.2 Network Configuration


Configuration.......................................................................................................
.......................................................................................................
.......................................................................................................66

2.3 Channel Manage


Manage..................................................................................................................
..................................................................................................................
..................................................................................................................66

2.4 Preview
Preview................................................................................................................................
................................................................................................................................ 10

2.5 Video Playback


Playback..................................................................................................................
.................................................................................................................. 10

1
Chapter 1 Product Introduction

encoders interface
1.1 The encoder

Pic 1.1

BNC
(1) SDI input (2) BNC input (3) (4) Network
output

(5) RS485 (6) Power supply (7) Wifi (8) USB port

(9) Indicator light (10) Reset

2
1.2 The decoder
decoders interface

Pic 1.2

(1) HDMI output (2) USB (3) Audio output

(4) Nework (5) RS485 (6) Power supply

(7) VGA (8) BNC output (9) Switch

Front panel(1 power light 4 group indicator lightsevery group has 2 lights(working light,net
(10)
light))

3
1.3 The professional NVR panel(photos for reference only)

:the demand of professional NVR HDD:64M buffer or more,7200


Note:the

rpm or more.
(1) Direction/enter (2) Play pause/1 (3) Previous file/2 (4) Next file/3

(5) Backward (6) Playback stop/5 (7) Record search/6 (8) Alarm

pause/4 output/7

(9) Camera (10) Camera (11) Preset setting/0 (12) USB

narrowing/8 amplification/9

(13) ESC (14) Screen switch (15) Record control (16) PTZ control

(17) Main Menu (18) Function (19) shift (20) Shuttle

(21) Power switch

4
Chapter 2 Basic operation

2.1 Login
2.1

When the device boots up, the user must login and the system provides the corresponding functions

with the user purview

Admin is the super user


There are two user settings, admin and guest , they have no password.Admin

purview,guests permissions are preview and video playback.

Pic 2.1.1 encoderdecoderlogin

5
Pic 2.1.2 professional NVR login interface

Channel name and status

display,click
(1) (2) Screen switch
channel can pack up,and right

click the channel can configurate it.

on the next page turning,when

choosing a non maximum


(3) Full screen display (4)
number of channels,the

operation can be carried our.

(5) All channel Play (6) All channel Record

Password protection: If the password is continuous wrong three times, the alarm will start. If the

password is continuous wrong five times, the account will be locked. (Through reboot or after half an hour,

the account will be unlocked automatically).

For your system security, please modify your password after first login.

2.2 Network setup


2.2

To set the IP,the path is [Main menu]>[System]>[Network]

[IP Address]:default 192.168.1.10;

[Subnet Mask]: default 255.255.255.0;

[Gateway]:default 192.168.1.1

6
Pic 2.2.1 Network configuration

Setting the device IP and the routers in the same network segment.for example,the routers IP address

is 192.168.1.1,subnet mask is 255.255.255.0,so the default setting is ok.Generally the default gateway is

the same as routers IP address.Input the IP(192.18.1.10)with IE,you can login the device in the lan.

2.3 channel manage


2.3

Through[Main Menu]>[System]>[Digital]
Channel manage including digital channels, channel status, and channel type((Note
Note:: Encoder only have
channel type option ):

Pic 2.3.1 The channel manage interface of decoder and professional NVR

7
The channel manage interface of encoder
Pic 2.3.2 channel manage interface

Pic 2.3.3 single link page and multi-link page of digital channel

Channelselect channel title

EnableOpen digital channel, tick enable, then can do related settings

Time Synchronization Tick it means the time of this channel and device is the same.

Connection Mode can be singe connect or multi-ink, multi-link modes can connect to several devices,

device will be tour displayed one by one, tour interval can be set, no less then 10s;

8
Delete If the user want to change device, select the existing device, click delete will be ok.

Add click add will come out below page to add new device

Pic 2.3.4 Remote channel configuration interface

Configure Namedevice is with default configure title, user can revise it if necessary;

Device Type3 types: IPCDVRHVRuser can choose as what you like, default is IPC;

ProtocolDefault is TCP

Remote channel User can input remote channel title from the device that you want to connect

remotely

Device addressIP address of device.

PortDefault is 34567

User nameDefault is admin

Remark: click search


search will show all the devices that searched out, user can choose any of the
searchwill

device that you like.

Status::
Channel Status

channel status is to show the status of all the digital channel When there is what existing, status including

9
Max Resolution, This Resolution, Connection Status.

Channel status:

Pic 2.3.5 channel status

Channel type:

Pic 2.3.6 channel type

Note Encoder only support two all analog (DVR)type,1*1080P+3*960H/D1


NoteEncoder
HD decoder only support one digital type,1*1080P
Different professional NVR model can support different type.

10
2.4 Preview

You can right click mouse to choose the switch between the windows.

The system date, time and channel name are shown in each viewing window. The surveillance video

and the alarm status are shown in each window.

1 Video loss 3 Motion detect

2 Camera lock 4 Video bind

Table 2.4 Preview icon

2.5 Video Playback

There are two methods for you to play the video files in the hard disk
1.in the desktop shortcut menu
2.Main Menu>Record>playback
Note: The hard disk that saves the video files must be set as read-write or read-only state.

11
Pic 2.5.1 playback interface

Time progress Time interval


1 Playback control 2 Video mode 3 4
bar choosing

Switch by time,file Channel


5 6 File searching 7 8 Date choosing
mode choosing

Storage device File


9 10 11 Listed files 12 Time searching
choosing information

Listed filesLook up the listed files that accord with the searching criteria.

File informationLook up the found file information.

Playback controlSee detail in below chart

Key Function Key Function

/ Play/Pause Backward play

Slow forward Fast forward

Previous frame Next frame

Previous file Next file

12
Round play Full screen

Stop

Table 2.5 Playback control key

Note: play under frame by frame, the playback status should be paused firstly.

Operation tipsshow function of the key that cursor placed.

Special function
function

Accurate playback
playbackInput time (h/m/s) in the time column and then click play button. The system can

operate accurate playback according to the searching time.

Local zoom
zoomWhen the system is in single-window full-screen playback mode, you can drag your mouse

in the screen to select a section and then left click mouse to realize local zoom. You can right click mouse

to exit.

Note: When current resolution of the channel is over Max resolution, to playback this channel,

will show a Red X .

13

You might also like