Professional Documents
Culture Documents
CR PDF
CR PDF
For
0 3 5 Operating a DVR (Digital video recorder) Operating a digital cable box
example, if youre entering the code for Changing the Component Type on the CBL/ Remote Button Descriptions Specifications Component code numbers / Nmeros de cdigo de componentes
a Philips VCR, you would press -35. 3 (*1LIST) zREC: To record, press N 3 To use the FAVORITE function *2x: To stop.
SAT and DVD buttons
Remote Commander RM-V202 5 Press and release the ENT button to store
the code number in the
Your Code Number
ENT
At the factory, cable box is assigned on the CBL/SAT button and
DVD player on the DVD button. By completing the following
SET POWER
General
1 To set up the Commander,
To call up the title of the
recorded program.
4 To switch the output of the SAT
while pressing zREC.
First release N, then
release zREC. To stop
4 To switch the output of the SAT
receiver to the TV. (When
connecting a TV cable or
qs
*2X: To pause.
and qd
To change the channel.
Operable distance
Power requirements
Approx. 7 m (23 ft) (varies depending of the
component of each manufacturer)
Two size AA (R6) batteries (not supplied) English
Analog cable box/
TV VCR CBL / SAT DVD
Commanders memory. procedure, you can change this setting so that you can set up any press SET while pressing receiver to the TV. recording, perform the antenna to the receiver, the (for example, to change to Battery life Approx. 6 months (varies depending on frequency of
Operating Instructions 6 Go to Step 2: Checking if the Code Number Works to finish component on these buttons. 1 2 3 POWER. (When connecting a TV cable or same procedure. output switches between a TV channel 5, press 0 and 5, or use) TV/VCR/COMBO* Adaptador para cable analgico
2 Component select buttons. antenna to the receiver, the x: To stop. and SAT program.) Dimensions Approx. 55 200 32 mm (w/h/d)
Manual de instrucciones (parte posterior) setting up. 1 While pressing the SET button, press the POWER button. 4 5 6 To switch to the operations output switches between a TV X: To pause. 6 To turn on the display. qf
press 5 and ENT.)
CH+: Channel up. (2 1/4 7 7/8 1 5/16 in.)
The left row of the table shows the brand, the center row shows
the component (TV, VCR or COMBO) and the right row shows the
and SAT program.) qs and qd Mass Approx. 95 g (3.4 oz.) (not including batteries) Brand Code No.
If you press a wrong button in step 4 2 Press the CBL/SAT or DVD button. 7 8 9 of each component, press 8 To move the cursor upward, CH: Channel down. code No.
Sony Corporation 2003 Printed in China the button on which that (*1THUMBS+) To change the channel downward, to the left, or to the Hamlin/Regal 022, 023, 024, 025, 026
Press the POWER button while pressing the SET button and then go 0
qg To exit the setting menu. Design and specifications are subject to change without notice. * COMBO stands for the unit combined with TV and VCR.
back to step 3. 3 Press and release the x (stop) button. PIP
VOL
ENT
CH
component is assigned. To select the desired recorded For example, to change to right. qh To turn on the display of a Jerrold/G.I 031, 001, 002, 003, 004, 005, 006,
TV / VIDEO
5 Volume up: + program. channel 5, press 0 and 5 (or, 9 To call up the MENU display. shortcut menu. Analog cable box, SAT (digital satellite receiver), digital cable box, 007, 008, 018, 022, 032
4 Press and release one of the following buttons; DVR (digital video recorder) and DVD
DISPLAY
Volume down: (It is necessary to have press 5 and ENT). 0 and ql qj To call up the title bar and Oak 027, 028, 029
The CE mark on the unit is valid only for products
English Step 2: Checking if the Code Number Works 1 to assign a VCR 7 To mute the volume on TV. recorded the desired program.) qf CH+: Channel up. *2N: To play. toggle the title bar on/off in The left row of the table shows the brand and the right row shows Panasonic 019, 020, 021
SLEEP
marketed in the European Union. the code No.
3 to assign a digital satellite receiver, a digital cable box or a MUTING RECALL
qa To turn on and off the 6 To turn on the display. (*1PAGE+) Page up. *2m: To rewind. CABLE mode. Pioneer 014, 015
1 Power on the component you want to set up. digital video recorder power of the selected (*1THUMBS) CH: Channel down. *2M: To fast-forward. qk To bring up the Station Index
For the customers in the U.S.A. Installing the Batteries 8 to assign a TV component. To select the desired recorded (*1PAGE) Page down. *2zREC: when a program guide is not
Scientific Atlanta 009, 010, 011
Before replacing the batteries, have new ones ready beforehand. 2 Aim the Remote Commander at the component and press a button program. qg To clear the setting. To record, press N
Tocom 031, 016, 017
to check if that button works.
9 to assign an analog cable box MENU GUIDE OK
displayed. Troubleshooting Espaol Zenith 012, 013
WARNING Slide open the battery compartment and insert two size AA (R6) For example, press the POWER button to see if it works on your
- to assign a DVD (It is necessary to have
recorded the desired program.) qh
To exit the setting menu.
(*1REPLAY)
while pressing zREC.
First release N, then
To select the channel that is
REC
highlighted. If you have problems setting up or using the Commander:
This equipment has been tested and found to comply with the limits batteries (not supplied). component . 5 Press and release the ENT button. 8 To move the cursor upward, To replay. release zREC. To stop TV/VCR/COMBO*
When setting up the Commander, carefully go through the procedures
for a Class B digital device, pursuant to Part 15 of the FCC Rules. Be sure to line up the + and on the batteries with the + and on the downward, to the left, or to the Or to go into REC/REVIEW recording, perform the described in Setting the Code. If the code thats listed first for your La fila izquierda de la tabla muestra la marca, la central el
These limits are designed to provide reasonable protection against battery compartment.
3 Check that the other buttons of the Commander is operating the 6 Enter the components code number by following steps 2 to 6 of
right. mode during play. (After about same procedure. component doesnt work, try all the codes for your component - in the order componente (televisor (TV), videograbadora (VCR) o COMBO), y
Digital cable box/
corresponding functions of the component. Entering the Code Number, or steps 1to 7 of Searching for the
harmful interference in a residential installation. This equipment 9 To call up the MENU display. 5-second rewind, replay in which theyre listed. If all the codes fail to work (or if your component is la derecha el nmero de cdigo. Decodificador digital
generates, uses, and can radiate radio frequency energy and, if not 1 2 Correct Code. (*1EPG)
To access to all aspects of the
begins.)
To bring up Master Guide.
*2 The operation of the built-in DVR or the video on demand. not listed in this manual), try using the procedures in Searching for the * COMBO significa que la unidad est combinada con un televisor y una
installed and used in accordance with the instructions, may cause You can write down the code number on the label inside the qj Correct Code. videograbadora. Brand Code No.
harmful interference to radio communications. However, there is service. (*1Live TV) Check that youre aiming the Commander directly at the component, and that Sony 013
battery compartment lid. CBL (adaptador para cable analgico), SAT (sintonizador de
no guarantee that interference will not occur in a particular Operating a Component 0 and ql
N: To play. qk
To bring up Master Guide.
To bring up the Station Index
Operating a digital satellite receiver there are no obstructions between the Commander and the component.
Make sure the batteries youre using are not worn out, and that theyre recepcin va satlite digital), decodificador digital, DVR Jerrold/G.I. 015
installation. If this equipment does cause harmful interference to If the Commander Doesnt Seem to Be Working... (Videograbadora digital) y DVD (reproductor de discos DVD) Motorola 015
m: To rewind. when a program guide is not 3 To use the FAVORITE qf Channel up: + inserted correctly.
radio or television reception, which can be determined by turning First, try repeating these setup procedures using the other codes 1 Press the button of the desired component on the Commander. Check that the button of the TV, VCR, CBL/SAT, or DVD is pressed to choose La fila izquierda de la tabla muestra la marca y la derecha muestra Panasonic 021
M: To fast-forward. displayed. function. Channel down:
the equipment off and on, the user is encouraged to try to correct the listed for your component (see the supplied Component Code 4 To switch the output of the To page through the guide your desired component. el nmero de cdigo.
TV VCR CBL / SAT DVD To select the channel that is Philips 016
interference by one or more of the following measures: Numbers). Operating a TV digital satellite receiver to the when a program guide is Check that the component has infrared remote capability. For example, if
highlighted. Scientific Atlanta 014
Reorient or relocate the receiving antenna. When to replace the batteries If after trying all the codes listed for your component you still TV. (When you connect a TV displayed. your component didnt come with a remote commander, it probably isnt
Increase the separation between the equipment and receiver. 3 To operate the Picture-in- qf Channel up: + capable of being controlled by a remote commander.
Under normal conditions, batteries will last up to 6 months. If the cannot get the Commander to work properly, try the search Picture function. Press each Channel down: *1 This key corresponds to Tivo service or the replay service. Refer to its cable or antenna to the receiver, qg To bring up the Station Index.
Connect the equipment into an outlet on a circuit different from 2 Point the Commander directly at the component. Should any problem persist, reset the Commander to the factory setting by
Commander does not operate properly, the batteries might be worn method described in Searching for the Correct Code. button or combination of qg To operate SLEEP function on instruction manual for details. the output switches between a qh To tune to the last tuned
that to which the receiver is connected. pressing the POWER, TV/VIDEO and VOL buttons simultaneously.
out. Replace the batteries with new ones. 3 Press the button for the function you want to use. buttons as described in the the TV. (Works only for a TV TV and SAT program.) station. To set a Component Code (see the instruction manual for details) SAT
Consult the dealer or an experienced radio/TV technician for help. table below. with the SLEEP function.) 8 To scroll through the Master qj To bring up the Master Guide.
You are cautioned that any changes or modifications not expressly Notes Searching for the Correct Code
See Remote Button Descriptions for complete descriptions of the
4 To change the input mode. Operating an analog cable box Guide. qk To select the channel thats For the customers in the U.S.A. Para introducir un cdigo de componente (consulte los detalles en
Brand Code No.
buttons on the Commander. qh To operate JUMP, FLASHBACK el manual de instrucciones)
approved in this manual could void your authority to operate this Replace both batteries with new ones. 6 To display the current channel or CHANNEL RETURN function qs and qd qh To operate JUMP, FLASHBACK
9 To call up the MENU display. highlighted. To bring up the Customer Support Information DirecTV Sony 001
equipment. Do not take more than 3 minutes to replace the batteries; otherwise, Notes on Using the Remote Commander on TV. on the TV depending on the qs and qd Station Index when a program If after youve read through this manual you still cannot get the
If youve tried all the code numbers listed for your component and To change the channel. For or CHANNEL RETURN function Hitachi 005
your setting of the code numbers will be erased. Basically, use this Commander in the same way as the Commanders 8 To move the cursor upward, setting of the TVs To change the channel. For guide is not displayed. Remote Commander to work properly, call the Sony Customer SET POWER
you still cannot get the Commander to work (or if your component is example, to change to channel on the TV depending on the Hughes 004
downward, to the left, or to the manufacturer. example, to change to channel ql N: To exit the mode. Support Helpline at 1-800-822-2217.
not listed in the Component Code Numbers tables), try these supplied with your components. 5, press 0 and 5 (or press 5 and setting of the TVs
5, press 0 and 5 (or press 5 and Panasonic 003
Setting Up the Remote Commander Notes on Batteries steps. Using this Commander will not increase the functions of your right.
9 To call up the MENU display.
qk To enter the selection. ENT).
qf Channel up: +
manufacturer.
ENT).
While pressing the SET button, press the POWER
button. RCA/Proscan 002, 007
Do not mix old batteries with new ones or mix different types of components. The functions of the Commander are limited to the
1 Power on the component you want to set up. Insert a tape or disc functions of the components themselves. For example, if your TV qs and qd Channel down: Toshiba 006
About Presetting the Commander batteries together. if necessary. To change the channel. For Al tiempo que mantiene presionado el botn SET,
The Commander is preset at the factory to operate Sony brand If the electrolyte inside the battery should leak, wipe the does not have a MUTING function, the MUTING button on this Notes Operating a DVD presione el botn POWER.
example, to change to channel
components. contaminated area of the battery compartment with a cloth and 2 While pressing the SET button, press the POWER button. Commander will not function with your TV. There may be cases you may turn on/off the cable box by pressing the CH+ or
5, press 0 and 5 (or press 5 and CH buttons on the Commander. 3 To select numbers 10 and qf CH+: To proceed to the next
Some functions of the component may not work with this
c
If youre using the Commander with a Sony component, you wont replace the old batteries with new ones. To prevent the electrolyte 3 Press the button of the component on the Commander that you ENT). If your cable box can control volume, be sure to set its volume control to a above. For example, to select location or song.
DVD
need to preset the Commander before you start using it. from leaking, remove the batteries when you plan not to use the Commander.
want to set up. medium position. If the volume on the cable box is turned down completely, track 15, press PIP and then Channel up.
To set up the Commander to use with other (non-Sony) Commander for a long period of time. If your cable box can control volume, be sure to set its volume PIP operations TV VCR CBL / SAT DVD
you will not be able to adjust your TVs volume with the Commander. press 5. CH: To proceed to the Brand Code No.
manufacturers components, or to use with a component that is not 4 Press and release the CH+ button. Then press and release the switch to a medium position. If the volume on the cable box is
Press To 4 To change the sound. previous location or song. Sony 001, 023, 024, 025, 030, 031, 032, 040
preset at the factory, youll need to follow the instructions in this POWER button. turned down completely, you will not be able to adjust your TVs
volume with the Commander. PIP Turn on/off the window picture. 6 To show the current play status Channel down. Aiwa 015
c
manual to preset the Commander with the correct code number for Setting the Code 5 Repeat step 4 until the correct code number is found. GUIDE Turn off the window picture. on the screen. qg To switch the subtitle. Daewoo 029
your components. (See the supplied Component Code Numbers Follow the steps 1 and 2 below for each component you plan to use Each time you press the CH+ button and then the POWER button, 8 To move the cursor upward, qh To display the title menu.
m or M Change the TV channel in the window picture. Denon 006, 017
also.) with the Commander. a new code number will be transmitted. downward, to the left, or to the qj To clear the selected characters Code No.
Keep trying until your component operates by receiving the zREC Change the input mode of the window picture. right. from the screen. Harman/Kardon 018
Hitachi 008
c
transmitted signal from the Commander (e.g., the power turns off, x Move the location of the window picture. 9 To display the DVD menu. qk To execute items selected from
Component that can be preset Button Factory setting Step 1: Entering the Code Number 0 To record, press N while the screen.
the CH+ function works, playback starts, etc.) Be patient as you do N Swap the main picture and the window picture. JVC 007, 037
TV TV Sony TV this; it may take about 70 tries until the correct code number is X Freeze the window picture. pressing zREC. ql N: To play. ENT KLH 010
1 See the supplied Component Code numbers, and find the three- First release N, then release m: To rewind.
VCR VCR Sony VHS VCR digit code number for the desired component. located. Onkyo 016
zREC. M: To fast-forward.
If more than one code number is listed, use the number thats Panasonic 002, 006, 027, 028, 034, 035, 036,
Analog cable box/Digital cable box/ CBL/SAT 6 When the correct code is found, press the ENT button to store the qs Number buttons : To set items x: To stop.
listed first to complete the steps below. Operating a VCR 042, 045
Digital satellite receiver/DVD/TV/ DVD Sony DVD player
code number in the Commanders memory. selected from the screen. X: To pause.
For example, if youre setting up a Philips VCR, you would use qd To enter the setting. To set Philips 012
VCR/Digital video recorder 7 Check that the Commander is operating the other functions of
the code number 035.
your component by pressing the corresponding buttons on the
4 To switch the antenna output. qs and qd items selected from the screen. DVR (Digital Video Recorder)/ Pioneer 004, 019, 021, 033
Notes If your component isnt listed, see Searching for the Correct 6 To expose the on-screen To change the channel. For RCA 005
Code. Commander. If they seem to be working properly, youre done display. DVR (Videograbadora digital) Samsung 014, 041
The Commander can be set up to operate only one component per example, to change to channel
setting up the Commander. 8 To move the cursor upward, 5, press 0 and 5 (or press 5 and
button unless their code numbers happen to be the same. For 2 While pressing the SET button, Tivo Sharp 011, 048
SET POWER If the component does not operate properly, repeat steps 1 to 6 and downward, to the left, or to the ENT).
example, you cannot set up the Commander to operate a Sony TV press the POWER button. Brand Code No. Shinco 022
right. qf Channel up: +
and a Panasonic TV simultaneously (because they use different search for another code. Sylvania 020, 044, 049
9 To call up the MENU display. Channel down: Sony 017, 018, 019
code numbers). 3 Press the button of the TV VCR CBL / SAT DVD If you still cannot get the Commander to work properly, see q; and ql Thomson 013
qg To change the input mode. Philips 020
You may not be able to operate even a Sony brand component with component that you want to set Troubleshooting. N: To play. Toshiba 003, 038, 039, 046
qk To enter the selection.
the factory presetting. In such a case, follow the procedure in up. x: To stop. Yamaha 006
Setting the Code. Replay
m: To rewind. Zenith 009, 047
Note M: To fast-forward. Brand Code No.
On the CBL/SAT and DVD buttons, cable box, and DVD player zREC: To record, press N
are assigned respectively at the factory. But you can also assign other Panasonic 021
while pressing zREC.
components on these buttons. For details, see Changing the Replay 022
Component Type on the CBL/SAT and DVD buttons. Continued on reverse side
Contina en el reverso
Brand Component Code No. Espaol Paso 2: Comprobacin del funcionamiento de un Control de un videograbadora (VCR) Control de un decodificador digital
TV/VCR/COMBO Colocacin de las pilas Cambio del tipo de componente de las Descripcin de las teclas del telemando Especificaciones
Mitsubishi/MGA VCR 026, 027, 028, 029, 056, 057, 065, 059 nmero de cdigo 3 Utilizar la funcin FAVORITE. qs y qd
TV 024, 003, 012, 066
Antes de reemplazar las pilas, tenga unas nuevas preparadas. teclas CBL/SAT y DVD 4 Para cambiar la salida de antena. qs y qd
4 Cambiar la salida del receptor Cambiar el canal.
Brand Component Code No.
Sony VCR 001 Multitech VCR 028, 041, 024 Para los clientes de EE. UU. Deslice y abra el compartimiento de las pilas, e inserte dos pilas de
1 Conecte la alimentacin del componente que desee ajustar. En la fbrica adaptador para cablevisin se ha asignado a la tecla General
6 Para hacer que se visualicen las
indicaciones en pantalla.
Para cambiar el canal. Por
ejemplo, para cambiar al canal 5, SAT al televisor (al conectar un Por ejemplo, para cambiar al canal Alcance de control Aprox. 7 m (23 ft) (puede variar dependiendo del
CBL/SAT y el reproductor de discos DVD en la tecla DVD. Al cable de televisor o una antena al componente de cada fabricante)
NEC VCR 017, 039, 040 tamao AA (R6) (no suministradas). 2 Apunte con el telemando hacia el componente y presione una 1 Para configurar el mando a 8 Para mover el cursor hacia arriba, presione 0 y 5 (o presione 5 y 5, presione 0 y 5 (o bien, presione
(VTR1:Betamax)
ADVERTENCIA
SET POWER
receptor, la salida alterna entre los 5 y ENT). Alimentacin Dos de tamao AA (R6) (no suministradas)
VCR (VTR2:8mm) 002 TV 003, 012 Cercirese de alinear + y de las pilas con + y del compartimiento tecla para comprobar si trabaja. realizar el procedimiento siguiente es posible cambiar este ajuste de TV VCR CBL / SAT DVD
distancia, pulse SET hacia abajo, hacia la izquierda, o ENT). Duracin de las pilas Aprox. 6 meses (puede variar dependiendo de la
Este equipo ha sido probado y se ha encontrado que cumple con los forma que pueda ajustar cualquier componente con estos botones. manteniendo presionado hacia la derecha. qf Para pasar a canales superiores: + programas de TV y los de SAT). qf CH+: Canal siguiente.
Olympic VCR 012, 011 de las mismas. Por ejemplo, presione la tecla POWER para ver si trabaja en su frecuencia de utilizacin)
VCR (VTR3:VHS) 003 1 2 3 POWER. 9 Para invocar la visualizacin de Para pasar a canales inferiores: 6 Encender la pantalla. CH: Canal anterior.
lmites para dispositivos digitales de Clase B, de acuerdo con la Parte componente. Dimensiones Aprox. 55 200 32 mm (an/al/prf)
1 Al tiempo que mantiene presionado el botn SET, presione el 8 Para mover el cursor hacia arriba,
VCR (VTR4:DV)
VCR (VTR5:DV)
004
005
Optimus
Orion
VCR
VCR
027
055
15 de las normas de la FCC. Estos lmites han sido diseados para 1 2 3 Compruebe si las otras teclas del telemando controlan las botn POWER.
4 5 6 2 Teclas selectoras de
componentes. Para cambiar a
MENU.
q; y ql
qg Cambio del modo de entrada.
qk Para introducir la seleccin. hacia abajo, hacia la izquierda, o
qg Salir del men de ajustes.
qh Activar la pantalla de un men Peso Aprox. 95 g (excluyendo las pilas)
proporcionar una proteccin razonable contra interferencias 7 8 9 VCR (Videograbadora): hacia la derecha. contextual. El diseo y las especificaciones estn sujetos a cambio sin previo aviso.
VCR (VTR6:DV) 006 Panasonic VCR 009, 010, 011, 012, 060 funciones correspondientes del componente. 2 Presione la tecla CBL/SAT o DVD. las operaciones de cada
perjudiciales en una instalacin residencial. Este equipo genera, N: Para reproducir. 9 Invocar la pantalla de men. qj Invocar la barra de ttulos y
TV 018, 016, 007, 049, 067, 074, 076 PIP 0 ENT componente, presione la tecla
TV 001 utiliza, y puede radiar energa de radiofrecuencia y, si no se instala y x: Para parar. 0 y ql activarla o desactivarla en modo La certificacin CE que consta en la unidad tiene validez
Usted podr escribir el nmero de cdigo en la etiqueta del 3 Presione y suelte la tecla x (parada). VOL CH
a la que haya asignado el *2N: Reproducir.
Admiral VCR 030 TV/VCR COMBO TV018&VCR011, TV018&VCR012 utiliza de acuerdo con las instrucciones, puede causar interferencias
TV / VIDEO