The document outlines the scope of supply for a pump package which includes the pump, base frame, coupling, guard, flanges, drip tray, strainer, gauges, bolts, and motor. It also specifies that steel surfaces inside buildings require a primer coat of red oxide of 50 microns, an undercoat of synthetic enamel of 50 microns, and two topcoats of synthetic enamel of 50 microns each, for a total thickness of 200 microns. Additionally, it provides details for a pump project including the model, quantity, speed, capacity, pressure, liquid, viscosity, motor specifications, frame, coupling, rotation, duty, subcontractor, and more.
The document outlines the scope of supply for a pump package which includes the pump, base frame, coupling, guard, flanges, drip tray, strainer, gauges, bolts, and motor. It also specifies that steel surfaces inside buildings require a primer coat of red oxide of 50 microns, an undercoat of synthetic enamel of 50 microns, and two topcoats of synthetic enamel of 50 microns each, for a total thickness of 200 microns. Additionally, it provides details for a pump project including the model, quantity, speed, capacity, pressure, liquid, viscosity, motor specifications, frame, coupling, rotation, duty, subcontractor, and more.
The document outlines the scope of supply for a pump package which includes the pump, base frame, coupling, guard, flanges, drip tray, strainer, gauges, bolts, and motor. It also specifies that steel surfaces inside buildings require a primer coat of red oxide of 50 microns, an undercoat of synthetic enamel of 50 microns, and two topcoats of synthetic enamel of 50 microns each, for a total thickness of 200 microns. Additionally, it provides details for a pump project including the model, quantity, speed, capacity, pressure, liquid, viscosity, motor specifications, frame, coupling, rotation, duty, subcontractor, and more.
PRESSURE GAUGE,FOUNDATION BOLTS & NUTS AND MOTOR. Painting Specification : For all the steel surface inside the (indoor Installation) building, a coat of red oxide primes of min. thickness of 50 micron followed up with under coat of synthetic enamel paint of min. thickness of 50 micron shall be applied. The top coat shall consist of two coats each of min. thickness of 50 micron of synthetic enamel paint and thus total thickness shall be min. 200 micron.