Professional Documents
Culture Documents
L11 Multi Storey 1 PDF
L11 Multi Storey 1 PDF
Florea Dinu
Lecture 11: 24/02/2014
European Erasmus Mundus Master Course
Sustainable Constructions
under Natural Hazards and Catastrophic Events
520121-1-2011-1-CZ-ERA MUNDUS-EMMC
European Erasmus Mundus Master Course
L11
L10 - 2C08
B.2 Mechanical properties of cast iron, mild iron and steel at historical structures
Multistoreybuildings 3
European Erasmus Mundus Master Course
Approximate weight:
G = 12 + n/2 [kg/m3 of space]
... n is number of storeys
L11
L10 - 2C08
B.2 Mechanical properties of cast iron, mild iron and steel at historical structures
Multistoreybuildings 4
European Erasmus Mundus Master Course
Typical arrangements:
L11
L10 - 2C08
B.2 Mechanical properties of cast iron, mild iron and steel at historical structures
Multistoreybuildings 5
European Erasmus Mundus Master Course
Disposition
Follows from structural and operational arrangement cooperation of civil and
structural engineer is essential.
Includes: - arrangement of columns in plan,
- design of floor structure,
- arrangement and design of bracings.
Arrangement of columns in plan
Optimal is regular mesh. Skew connections are however common.
Column spacing
Optimum L = 6 9 [m], tendency up to 18 m:
Lower spacing for steel is not economical.
L11
L10 - 2C08
B.2 Mechanical properties of cast iron, mild iron and steel at historical structures
Multistoreybuildings 6
European Erasmus Mundus Master Course
Height of structure:
(systems according
to ducts of services)
L11
L10 - 2C08
B.2 Mechanical properties of cast iron, mild iron and steel at historical structures
Multistoreybuildings 7
European Erasmus Mundus Master Course
Bracings
1. Vertical bracing transversal and longitudinal
(transfer horizontal forces into basements)
2. Horizontal bracing in floor and roof plane
(transfer horizontal forces into vertical bracing)
Design of bracings
Types of framing:
a) Non braced (hinged, articulated, swinging)
transfer only vertical loadings,
connections are non-rigid (or semi-rigid).
b) Vertical bracing
Usually some framing only, transfer also horizontal loadings.
either permanent
or during erection only
L11
L10 - 2C08
B.2 Mechanical properties of cast iron, mild iron and steel at historical structures
Multistoreybuildings 8
European Erasmus Mundus Master Course
Wall:
reinforced concrete wall or core,
steel walls:
Advantage: both moment and shear behaviour big rigidity, limited number of walls.
Distribution of bracing
View of layout:
trusses or walls were possible,
if free space needed - frames.
L11
L10 - 2C08
B.2 Mechanical properties of cast iron, mild iron and steel at historical structures
Multistoreybuildings 10
European Erasmus Mundus Master Course
b) Choose wide bracing which are more effective then narrow bracings.
They have greater stiffness, which depends roughly on square of width.
L11
L10 - 2C08
B.2 Mechanical properties of cast iron, mild iron and steel at historical structures
Multistoreybuildings 11
European Erasmus Mundus Master Course
Floor system
a) Systems with primary and secondary beams (the most common)
L11
L10 - 2C08
B.2 Mechanical properties of cast iron, mild iron and steel at historical structures
Multistoreybuildings 12
European Erasmus Mundus Master Course
Modern solutions
Slim floor systems
prefabricated
floor deck
L11
L10 - 2C08
B.2 Mechanical properties of cast iron, mild iron and steel at historical structures
Multistoreybuildings 13
European Erasmus Mundus Master Course
Slab types
L11
L10 - 2C08
B.2 Mechanical properties of cast iron, mild iron and steel at historical structures
Multistoreybuildings 14
European Erasmus Mundus Master Course
Requirements:
rigid,
simple erection,
low mass (in reverse requirem. of acoustics).
Drawbacks:
laborious,
heavy,
wet process.
2. Pre-cast concrete slabs
Advantages:
fast,
wet only at grouted joint.
L11
L10 - 2C08
B.2 Mechanical properties of cast iron, mild iron and steel at historical structures
Multistoreybuildings 15
European Erasmus Mundus Master Course
3. Metal decking
Thin-walled cold-formed sheeting, t 0,7 1.5 mm.
a) High profiles (h 150 300 mm):
Floors without secondary beams or slim floors.
L11
L10 - 2C08
B.2 Mechanical properties of cast iron, mild iron and steel at historical structures
Multistoreybuildings 16
European Erasmus Mundus Master Course
- span up to 3 m
Position of sheeting
normal usually higher section modulus Weff,
reverse concrete slab is heavier but shear connectors earn
higher resistance.
c) Flat sheeting with ribs
t 1,25 2 mm
May act as a membrane!!
L11
L10 - 2C08
B.2 Mechanical properties of cast iron, mild iron and steel at historical structures
Multistoreybuildings 17
European Erasmus Mundus Master Course
L11
L10 - 2C08
B.2 Mechanical properties of cast iron, mild iron and steel at historical structures
Multistoreybuildings 18
European Erasmus Mundus Master Course
L11
L10 - 2C08
B.2 Mechanical properties of cast iron, mild iron and steel at historical structures
Multistoreybuildings 19
European Erasmus Mundus Master Course
L11
L10 - 2C08
B.2 Mechanical properties of cast iron, mild iron and steel at historical structures
Multistoreybuildings 21
European Erasmus Mundus Master Course
L11
L10 - 2C08
B.2 Mechanical properties of cast iron, mild iron and steel at historical structures
Multistoreybuildings 22
European Erasmus Mundus Master Course
L11
L10 - 2C08
B.2 Mechanical properties of cast iron, mild iron and steel at historical structures
Multistoreybuildings 23
European Erasmus Mundus Master Course
I II III IV
L11
L10 - 2C08
B.2 Mechanical properties of cast iron, mild iron and steel at historical structures
Multistoreybuildings 24
European Erasmus Mundus Master Course
Applications
L11
L10 - 2C08
B.2 Mechanical properties of cast iron, mild iron and steel at historical structures
Multistoreybuildings 25
European Erasmus Mundus Master Course
Composite truss
L11
L10 - 2C08
B.2 Mechanical properties of cast iron, mild iron and steel at historical structures
Multistoreybuildings 26
European Erasmus Mundus Master Course
Applications
Composite Trusses WTC application
L11
L10 - 2C08
B.2 Mechanical properties of cast iron, mild iron and steel at historical structures
Multistoreybuildings 27
European Erasmus Mundus Master Course
L11
L10 - 2C08
B.2 Mechanical properties of cast iron, mild iron and steel at historical structures
Multistoreybuildings 28
European Erasmus Mundus Master Course
L11
L10 - 2C08
B.2 Mechanical properties of cast iron, mild iron and steel at historical structures
Multistoreybuildings 29
European Erasmus Mundus Master Course
Truss types
Several forms of truss arrangement are possible. The three
most common web framing configurations in floor truss and
joist designs are:
Warren Truss
Modified Warren Truss
Pratt Truss
L11
L10 - 2C08
B.2 Mechanical properties of cast iron, mild iron and steel at historical structures
Multistoreybuildings 30
European Erasmus Mundus Master Course
The stub girder system involves the use of short beam stubs that are
welded to the top flange of a continuous, heavier bottom girder member,
and connected to the concrete slab through the use of shear studs.
Continuous transverse secondary beams and ducts can pass through the
openings formed by the beam stub. The natural openings in the stub girder
system allow the integration of structural and service zones in two
directions, permitting story-height reduction when compared with some
other structural framing systems.
L11
L10 - 2C08
B.2 Mechanical properties of cast iron, mild iron and steel at historical structures
Multistoreybuildings 31
European Erasmus Mundus Master Course
Special types
Parallel Beam System
The system consists of two main beams with secondary beams run
over the top of the main beams. The main beams are connected to
either side of the column.
This will help in reducing the construction depth
The secondary beams are designed to act compositely with the slab
and may also be made to span continuously over the main beams.
The need to cut the secondary beams at every junction is thus
avoided.
The parallel beam system is ideally
suited for accommodating large service
ducts in orthogonal directions
L11
L10 - 2C08
B.2 Mechanical properties of cast iron, mild iron and steel at historical structures
Multistoreybuildings 32
European Erasmus Mundus Master Course
Special types
Prestressed Composite Beams
Prestressing of the steel girders is carried out such that the
concrete slab remains uncracked under the working loads and
the steel is utilized fully in terms of stress in the tension zone of
the girder.
It enhances the load-carrying capacity and stiffness of long-
span structures
L11
L10 - 2C08
B.2 Mechanical properties of cast iron, mild iron and steel at historical structures
Multistoreybuildings 33
European Erasmus Mundus Master Course
Static solution:
L11
L10 - 2C08
B.2 Mechanical properties of cast iron, mild iron and steel at historical structures
Multistoreybuildings 34
European Erasmus Mundus Master Course
L11
L10 - 2C08
B.2 Mechanical properties of cast iron, mild iron and steel at historical structures
Multistoreybuildings 35
European Erasmus Mundus Master Course
L11
L10 - 2C08
B.2 Mechanical properties of cast iron, mild iron and steel at historical structures
Multistoreybuildings 36
European Erasmus Mundus Master Course
Slim-floor system
L11
L10 - 2C08
B.2 Mechanical properties of cast iron, mild iron and steel at historical structures
Multistoreybuildings 37
European Erasmus Mundus Master Course
L11
L10 - 2C08
B.2 Mechanical properties of cast iron, mild iron and steel at historical structures
Multistoreybuildings 38
European Erasmus Mundus Master Course
L11
L10 - 2C08
B.2 Mechanical properties of cast iron, mild iron and steel at historical structures
Multistoreybuildings 40
European Erasmus Mundus Master Course
L11
L10 - 2C08
B.2 Mechanical properties of cast iron, mild iron and steel at historical structures
Multistoreybuildings 41
European Erasmus Mundus Master Course
a) Placing from above (simple, provides continuity, but high floor depth).
b) Flush-mounted (usual).
L11
L10 - 2C08
B.2 Mechanical properties of cast iron, mild iron and steel at historical structures
Multistoreybuildings 42
European Erasmus Mundus Master Course
3. Site welding
(slow, exceptionally)
L11
L10 - 2C08
B.2 Mechanical properties of cast iron, mild iron and steel at historical structures
Multistoreybuildings 43
European Erasmus Mundus Master Course
L11
L10 - 2C08
B.2 Mechanical properties of cast iron, mild iron and steel at historical structures
Multistoreybuildings 44
European Erasmus Mundus Master Course
Primary beams
Check for ULS and SLS is the same as for secondary beams.
(Note: for primary beams, the allowable deflection 2 may range from L/350 L/400)
The variable (live) loading in large loaded areas may be reduced by coefficient A
(see EN 1991-1-1).
2. End plates
Negative tolerances of
primary beam necessary
and fillers !!
L11
L10 - 2C08
B.2 Mechanical properties of cast iron, mild iron and steel at historical structures
Multistoreybuildings 46
European Erasmus Mundus Master Course
Frame joints (more complicated, mind the stability of compression flange !!)
1. Welded
Mind the possibility
of column flange doubling !!
(ultrasonic check, quality Z25)
L11
L10 - 2C08
B.2 Mechanical properties of cast iron, mild iron and steel at historical structures
Multistoreybuildings 47
European Erasmus Mundus Master Course
Requirements:
Principle of connections:
welded connection combined connection additional anchorage
(bolts + site welds)
L11
L10 - 2C08
B.2 Mechanical properties of cast iron, mild iron and steel at historical structures
Multistoreybuildings 48
European Erasmus Mundus Master Course
L11
L10 - 2C08
B.2 Mechanical properties of cast iron, mild iron and steel at historical structures
Multistoreybuildings 49
European Erasmus Mundus Master Course
L11
L10 - 2C08
B.2 Mechanical properties of cast iron, mild iron and steel at historical structures
Multistoreybuildings 50
European Erasmus Mundus Master Course
The SUSCOS powerpoints are covered by copyright and are for the
exclusive use by the SUSCOS teachers in the framework of this Erasmus
Mundus Master. They may be improved by the various teachers
throughout the different editions.
L11
L10 - 2C08
B.2 Mechanical properties of cast iron, mild iron and steel at historical structures
Multistoreybuildings 52
florea.dinu@upt.ro
http://steel.fsv.cvut.cz/suscos