Single wall main frame of stress relieved steel
Open back for easy maintenance
Al working parts lubricated for moisture and
dirt protection
Reversible manganese jaw dies for maximum
wear life
Spherical, self-aligning roller bearings
Isolated, close running annular/labyrinth seals
protect bearings from dust and water
Removable pitman/bearing assembly for
maintenance ease
Manual shim adjustment
Cast steel pitman with machined
barrel
Machined pitman face for full swing jaw die
support
Electric motor
Drive sheave and bushingCeCe Ce
GATOR)
GATOR MACHINERY COMPANY
The Affordable Alternative in New Crushing Equipment
Specifications
3/4" to 2-1/2"
ENaNCE
FoRemuN 7
4.012
<| 40.18 718",
307
reco Pen
ar
2-471"
=
[Not: Because ofthe nature of jw rushers, it isnt possible to produce a produc al of which will pas a sereen opening equivalent tothe discharge setting.
(Oversize shouldbe expected, and will utate depending onthe rock characteristics. For close etn, ll undersize material shouldbe sereened ff to inetease
the effectiveness ofthe jaw and to reduce wear onthe jaw des. Although the crusher may be configured to ave a different discharge opening than indicated
shove this crusher mode isnt designed to operate a other stings.SERRE ECE CeCe
”}
GATOR MACHINERY COMPANY
Jaw Crusher Capacity in Tons
Closed Side
Seting | 19x20 | 10x29 | 10x47 | iaxsi | txts | 16x24 | 18x42 | 20x30 | 24x36 | aoxar | andr | s6x48
3a"
19mm
lo-1s
20-30)
‘astimm | 15-25 | 20-30 | 30-40 | so-70 | 1s
1"
Samm | 25-35 | 30-40 | 40-50 | ss-s0 | 15-20 | 20-35
ms
sosmm | 35-40 | 40-50 | 50-60 | 55-90 | 20-25 | 30-0 50-65
22"
Gsmm | 40-45 | 50-35 | 60-70
25-30 | 35-60 65-80
>
aé2mm | 45-50 | 55~60 | 70-80 | 85~110 45-70 80-95 | 70-90 |100-125}
32"
cea 100-130
60-75. | 95-110 | 80-110
a
an 60-80 | 70-90 |110-120] 90~120 |1s0~175 | 150-175] 280-340]
+12"
fe 80-105 110-140] 175~200] 175~200 | 300~350
¥
et 90-120 120-170] 200-225] 200-225] 320-370
a
1524mm '225~250| 225-250] 360-400
7
178mm 250-275] 380-420
a
203.2mm,
300 400-450)
All capacities are based on 100 Ibs. per cubic ft, weight of rock. Tonnage may very depending on size of feed, rate of feed, peropare
‘operation and operating conditions, breaking characteristics and compression strength of rock samples. Type and condition of jaw
face and horsepower used can alsa effect production capacity
Design & Specifications Subject to Change Without Notice 11020 Cherry Avenue, Fontana, CA 92337
Tel: (909)823-1688 Fax: (909)823-6868
November 2007